diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/net/dsa/lantiq_gswip.c | 105 |
1 files changed, 45 insertions, 60 deletions
diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c index 662e68a0e7e6..52e865a3912c 100644 --- a/drivers/net/dsa/lantiq_gswip.c +++ b/drivers/net/dsa/lantiq_gswip.c @@ -728,21 +728,16 @@ static int gswip_pce_load_microcode(struct gswip_priv *priv) static int gswip_port_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering, - struct switchdev_trans *trans) + struct netlink_ext_ack *extack) { + struct net_device *bridge = dsa_to_port(ds, port)->bridge_dev; struct gswip_priv *priv = ds->priv; /* Do not allow changing the VLAN filtering options while in bridge */ - if (switchdev_trans_ph_prepare(trans)) { - struct net_device *bridge = dsa_to_port(ds, port)->bridge_dev; - - if (!bridge) - return 0; - - if (!!(priv->port_vlan_filter & BIT(port)) != vlan_filtering) - return -EIO; - - return 0; + if (bridge && !!(priv->port_vlan_filter & BIT(port)) != vlan_filtering) { + NL_SET_ERR_MSG_MOD(extack, + "Dynamic toggling of vlan_filtering not supported"); + return -EIO; } if (vlan_filtering) { @@ -781,15 +776,8 @@ static int gswip_setup(struct dsa_switch *ds) /* disable port fetch/store dma on all ports */ for (i = 0; i < priv->hw_info->max_ports; i++) { - struct switchdev_trans trans; - - /* Skip the prepare phase, this shouldn't return an error - * during setup. - */ - trans.ph_prepare = false; - gswip_port_disable(ds, i); - gswip_port_vlan_filtering(ds, i, false, &trans); + gswip_port_vlan_filtering(ds, i, false, NULL); } /* enable Switch */ @@ -843,6 +831,9 @@ static int gswip_setup(struct dsa_switch *ds) } gswip_port_enable(ds, cpu_port, NULL); + + ds->configure_vlan_while_not_filtering = false; + return 0; } @@ -1141,61 +1132,64 @@ static void gswip_port_bridge_leave(struct dsa_switch *ds, int port, } static int gswip_port_vlan_prepare(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_vlan *vlan) + const struct switchdev_obj_port_vlan *vlan, + struct netlink_ext_ack *extack) { struct gswip_priv *priv = ds->priv; struct net_device *bridge = dsa_to_port(ds, port)->bridge_dev; unsigned int max_ports = priv->hw_info->max_ports; - u16 vid; - int i; int pos = max_ports; + int i, idx = -1; /* We only support VLAN filtering on bridges */ if (!dsa_is_cpu_port(ds, port) && !bridge) return -EOPNOTSUPP; - for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) { - int idx = -1; + /* Check if there is already a page for this VLAN */ + for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) { + if (priv->vlans[i].bridge == bridge && + priv->vlans[i].vid == vlan->vid) { + idx = i; + break; + } + } - /* Check if there is already a page for this VLAN */ - for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) { - if (priv->vlans[i].bridge == bridge && - priv->vlans[i].vid == vid) { - idx = i; + /* If this VLAN is not programmed yet, we have to reserve + * one entry in the VLAN table. Make sure we start at the + * next position round. + */ + if (idx == -1) { + /* Look for a free slot */ + for (; pos < ARRAY_SIZE(priv->vlans); pos++) { + if (!priv->vlans[pos].bridge) { + idx = pos; + pos++; break; } } - /* If this VLAN is not programmed yet, we have to reserve - * one entry in the VLAN table. Make sure we start at the - * next position round. - */ if (idx == -1) { - /* Look for a free slot */ - for (; pos < ARRAY_SIZE(priv->vlans); pos++) { - if (!priv->vlans[pos].bridge) { - idx = pos; - pos++; - break; - } - } - - if (idx == -1) - return -ENOSPC; + NL_SET_ERR_MSG_MOD(extack, "No slot in VLAN table"); + return -ENOSPC; } } return 0; } -static void gswip_port_vlan_add(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_vlan *vlan) +static int gswip_port_vlan_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan, + struct netlink_ext_ack *extack) { struct gswip_priv *priv = ds->priv; struct net_device *bridge = dsa_to_port(ds, port)->bridge_dev; bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID; - u16 vid; + int err; + + err = gswip_port_vlan_prepare(ds, port, vlan, extack); + if (err) + return err; /* We have to receive all packets on the CPU port and should not * do any VLAN filtering here. This is also called with bridge @@ -1203,10 +1197,10 @@ static void gswip_port_vlan_add(struct dsa_switch *ds, int port, * this. */ if (dsa_is_cpu_port(ds, port)) - return; + return 0; - for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) - gswip_vlan_add_aware(priv, bridge, port, vid, untagged, pvid); + return gswip_vlan_add_aware(priv, bridge, port, vlan->vid, + untagged, pvid); } static int gswip_port_vlan_del(struct dsa_switch *ds, int port, @@ -1215,8 +1209,6 @@ static int gswip_port_vlan_del(struct dsa_switch *ds, int port, struct gswip_priv *priv = ds->priv; struct net_device *bridge = dsa_to_port(ds, port)->bridge_dev; bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID; - u16 vid; - int err; /* We have to receive all packets on the CPU port and should not * do any VLAN filtering here. This is also called with bridge @@ -1226,13 +1218,7 @@ static int gswip_port_vlan_del(struct dsa_switch *ds, int port, if (dsa_is_cpu_port(ds, port)) return 0; - for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) { - err = gswip_vlan_remove(priv, bridge, port, vid, pvid, true); - if (err) - return err; - } - - return 0; + return gswip_vlan_remove(priv, bridge, port, vlan->vid, pvid, true); } static void gswip_port_fast_age(struct dsa_switch *ds, int port) @@ -1611,7 +1597,6 @@ static const struct dsa_switch_ops gswip_switch_ops = { .port_bridge_leave = gswip_port_bridge_leave, .port_fast_age = gswip_port_fast_age, .port_vlan_filtering = gswip_port_vlan_filtering, - .port_vlan_prepare = gswip_port_vlan_prepare, .port_vlan_add = gswip_port_vlan_add, .port_vlan_del = gswip_port_vlan_del, .port_stp_state_set = gswip_port_stp_state_set, |