diff options
Diffstat (limited to 'drivers/net/dsa/rtl8365mb.c')
-rw-r--r-- | drivers/net/dsa/rtl8365mb.c | 29 |
1 files changed, 17 insertions, 12 deletions
diff --git a/drivers/net/dsa/rtl8365mb.c b/drivers/net/dsa/rtl8365mb.c index baaae97283c5..3b729544798b 100644 --- a/drivers/net/dsa/rtl8365mb.c +++ b/drivers/net/dsa/rtl8365mb.c @@ -107,6 +107,7 @@ #define RTL8365MB_LEARN_LIMIT_MAX_8365MB_VC 2112 /* Family-specific data and limits */ +#define RTL8365MB_PHYADDRMAX 7 #define RTL8365MB_NUM_PHYREGS 32 #define RTL8365MB_PHYREGMAX (RTL8365MB_NUM_PHYREGS - 1) #define RTL8365MB_MAX_NUM_PORTS (RTL8365MB_CPU_PORT_NUM_8365MB_VC + 1) @@ -176,7 +177,7 @@ #define RTL8365MB_INDIRECT_ACCESS_STATUS_REG 0x1F01 #define RTL8365MB_INDIRECT_ACCESS_ADDRESS_REG 0x1F02 #define RTL8365MB_INDIRECT_ACCESS_ADDRESS_OCPADR_5_1_MASK GENMASK(4, 0) -#define RTL8365MB_INDIRECT_ACCESS_ADDRESS_PHYNUM_MASK GENMASK(6, 5) +#define RTL8365MB_INDIRECT_ACCESS_ADDRESS_PHYNUM_MASK GENMASK(7, 5) #define RTL8365MB_INDIRECT_ACCESS_ADDRESS_OCPADR_9_6_MASK GENMASK(11, 8) #define RTL8365MB_PHY_BASE 0x2000 #define RTL8365MB_INDIRECT_ACCESS_WRITE_DATA_REG 0x1F03 @@ -276,7 +277,7 @@ (RTL8365MB_PORT_ISOLATION_REG_BASE + (_physport)) #define RTL8365MB_PORT_ISOLATION_MASK 0x07FF -/* MSTP port state registers - indexed by tree instancrSTI (tree ine */ +/* MSTP port state registers - indexed by tree instance */ #define RTL8365MB_MSTI_CTRL_BASE 0x0A00 #define RTL8365MB_MSTI_CTRL_REG(_msti, _physport) \ (RTL8365MB_MSTI_CTRL_BASE + ((_msti) << 1) + ((_physport) >> 3)) @@ -679,6 +680,9 @@ static int rtl8365mb_phy_read(struct realtek_smi *smi, int phy, int regnum) u16 val; int ret; + if (phy > RTL8365MB_PHYADDRMAX) + return -EINVAL; + if (regnum > RTL8365MB_PHYREGMAX) return -EINVAL; @@ -704,6 +708,9 @@ static int rtl8365mb_phy_write(struct realtek_smi *smi, int phy, int regnum, u32 ocp_addr; int ret; + if (phy > RTL8365MB_PHYADDRMAX) + return -EINVAL; + if (regnum > RTL8365MB_PHYREGMAX) return -EINVAL; @@ -760,7 +767,8 @@ static int rtl8365mb_ext_config_rgmii(struct realtek_smi *smi, int port, * 0 = no delay, 1 = 2 ns delay * RX delay: * 0 = no delay, 7 = maximum delay - * No units are specified, but there are a total of 8 steps. + * Each step is approximately 0.3 ns, so the maximum delay is about + * 2.1 ns. * * The vendor driver also states that this must be configured *before* * forcing the external interface into a particular mode, which is done @@ -771,10 +779,6 @@ static int rtl8365mb_ext_config_rgmii(struct realtek_smi *smi, int port, * specified. We ignore the detail of the RGMII interface mode * (RGMII_{RXID, TXID, etc.}), as this is considered to be a PHY-only * property. - * - * For the RX delay, we assume that a register value of 4 corresponds to - * 2 ns. But this is just an educated guess, so ignore all other values - * to avoid too much confusion. */ if (!of_property_read_u32(dn, "tx-internal-delay-ps", &val)) { val = val / 1000; /* convert to ns */ @@ -787,13 +791,13 @@ static int rtl8365mb_ext_config_rgmii(struct realtek_smi *smi, int port, } if (!of_property_read_u32(dn, "rx-internal-delay-ps", &val)) { - val = val / 1000; /* convert to ns */ + val = DIV_ROUND_CLOSEST(val, 300); /* convert to 0.3 ns step */ - if (val == 0 || val == 2) - rx_delay = val * 2; + if (val <= 7) + rx_delay = val; else dev_warn(smi->dev, - "EXT port RX delay must be 0 to 2 ns\n"); + "EXT port RX delay must be 0 to 2.1 ns\n"); } ret = regmap_update_bits( @@ -896,7 +900,8 @@ static bool rtl8365mb_phy_mode_supported(struct dsa_switch *ds, int port, { if (dsa_is_user_port(ds, port) && (interface == PHY_INTERFACE_MODE_NA || - interface == PHY_INTERFACE_MODE_INTERNAL)) + interface == PHY_INTERFACE_MODE_INTERNAL || + interface == PHY_INTERFACE_MODE_GMII)) /* Internal PHY */ return true; else if (dsa_is_cpu_port(ds, port) && |