diff options
Diffstat (limited to 'drivers/net/dsa/sja1105')
-rw-r--r-- | drivers/net/dsa/sja1105/Kconfig | 25 | ||||
-rw-r--r-- | drivers/net/dsa/sja1105/Makefile | 14 | ||||
-rw-r--r-- | drivers/net/dsa/sja1105/sja1105.h | 209 | ||||
-rw-r--r-- | drivers/net/dsa/sja1105/sja1105_clocking.c | 695 | ||||
-rw-r--r-- | drivers/net/dsa/sja1105/sja1105_dynamic_config.c | 808 | ||||
-rw-r--r-- | drivers/net/dsa/sja1105/sja1105_dynamic_config.h | 40 | ||||
-rw-r--r-- | drivers/net/dsa/sja1105/sja1105_ethtool.c | 419 | ||||
-rw-r--r-- | drivers/net/dsa/sja1105/sja1105_main.c | 2243 | ||||
-rw-r--r-- | drivers/net/dsa/sja1105/sja1105_ptp.c | 393 | ||||
-rw-r--r-- | drivers/net/dsa/sja1105/sja1105_ptp.h | 64 | ||||
-rw-r--r-- | drivers/net/dsa/sja1105/sja1105_spi.c | 641 | ||||
-rw-r--r-- | drivers/net/dsa/sja1105/sja1105_static_config.c | 1065 | ||||
-rw-r--r-- | drivers/net/dsa/sja1105/sja1105_static_config.h | 290 |
13 files changed, 6906 insertions, 0 deletions
diff --git a/drivers/net/dsa/sja1105/Kconfig b/drivers/net/dsa/sja1105/Kconfig new file mode 100644 index 000000000000..770134a66e48 --- /dev/null +++ b/drivers/net/dsa/sja1105/Kconfig @@ -0,0 +1,25 @@ +# SPDX-License-Identifier: GPL-2.0-only +config NET_DSA_SJA1105 +tristate "NXP SJA1105 Ethernet switch family support" + depends on NET_DSA && SPI + select NET_DSA_TAG_SJA1105 + select PACKING + select CRC32 + help + This is the driver for the NXP SJA1105 automotive Ethernet switch + family. These are 5-port devices and are managed over an SPI + interface. Probing is handled based on OF bindings and so is the + linkage to PHYLINK. The driver supports the following revisions: + - SJA1105E (Gen. 1, No TT-Ethernet) + - SJA1105T (Gen. 1, TT-Ethernet) + - SJA1105P (Gen. 2, No SGMII, No TT-Ethernet) + - SJA1105Q (Gen. 2, No SGMII, TT-Ethernet) + - SJA1105R (Gen. 2, SGMII, No TT-Ethernet) + - SJA1105S (Gen. 2, SGMII, TT-Ethernet) + +config NET_DSA_SJA1105_PTP + bool "Support for the PTP clock on the NXP SJA1105 Ethernet switch" + depends on NET_DSA_SJA1105 + help + This enables support for timestamping and PTP clock manipulations in + the SJA1105 DSA driver. diff --git a/drivers/net/dsa/sja1105/Makefile b/drivers/net/dsa/sja1105/Makefile new file mode 100644 index 000000000000..4483113e6259 --- /dev/null +++ b/drivers/net/dsa/sja1105/Makefile @@ -0,0 +1,14 @@ +# SPDX-License-Identifier: GPL-2.0-only +obj-$(CONFIG_NET_DSA_SJA1105) += sja1105.o + +sja1105-objs := \ + sja1105_spi.o \ + sja1105_main.o \ + sja1105_ethtool.o \ + sja1105_clocking.o \ + sja1105_static_config.o \ + sja1105_dynamic_config.o \ + +ifdef CONFIG_NET_DSA_SJA1105_PTP +sja1105-objs += sja1105_ptp.o +endif diff --git a/drivers/net/dsa/sja1105/sja1105.h b/drivers/net/dsa/sja1105/sja1105.h new file mode 100644 index 000000000000..78094db32622 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105.h @@ -0,0 +1,209 @@ +/* SPDX-License-Identifier: GPL-2.0 + * Copyright (c) 2018, Sensor-Technik Wiedemann GmbH + * Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com> + */ +#ifndef _SJA1105_H +#define _SJA1105_H + +#include <linux/ptp_clock_kernel.h> +#include <linux/timecounter.h> +#include <linux/dsa/sja1105.h> +#include <net/dsa.h> +#include <linux/mutex.h> +#include "sja1105_static_config.h" + +#define SJA1105_NUM_PORTS 5 +#define SJA1105_NUM_TC 8 +#define SJA1105ET_FDB_BIN_SIZE 4 +/* The hardware value is in multiples of 10 ms. + * The passed parameter is in multiples of 1 ms. + */ +#define SJA1105_AGEING_TIME_MS(ms) ((ms) / 10) + +/* Keeps the different addresses between E/T and P/Q/R/S */ +struct sja1105_regs { + u64 device_id; + u64 prod_id; + u64 status; + u64 port_control; + u64 rgu; + u64 config; + u64 rmii_pll1; + u64 ptp_control; + u64 ptpclk; + u64 ptpclkrate; + u64 ptptsclk; + u64 ptpegr_ts[SJA1105_NUM_PORTS]; + u64 pad_mii_tx[SJA1105_NUM_PORTS]; + u64 pad_mii_id[SJA1105_NUM_PORTS]; + u64 cgu_idiv[SJA1105_NUM_PORTS]; + u64 mii_tx_clk[SJA1105_NUM_PORTS]; + u64 mii_rx_clk[SJA1105_NUM_PORTS]; + u64 mii_ext_tx_clk[SJA1105_NUM_PORTS]; + u64 mii_ext_rx_clk[SJA1105_NUM_PORTS]; + u64 rgmii_tx_clk[SJA1105_NUM_PORTS]; + u64 rmii_ref_clk[SJA1105_NUM_PORTS]; + u64 rmii_ext_tx_clk[SJA1105_NUM_PORTS]; + u64 mac[SJA1105_NUM_PORTS]; + u64 mac_hl1[SJA1105_NUM_PORTS]; + u64 mac_hl2[SJA1105_NUM_PORTS]; + u64 qlevel[SJA1105_NUM_PORTS]; +}; + +struct sja1105_info { + u64 device_id; + /* Needed for distinction between P and R, and between Q and S + * (since the parts with/without SGMII share the same + * switch core and device_id) + */ + u64 part_no; + /* E/T and P/Q/R/S have partial timestamps of different sizes. + * They must be reconstructed on both families anyway to get the full + * 64-bit values back. + */ + int ptp_ts_bits; + /* Also SPI commands are of different sizes to retrieve + * the egress timestamps. + */ + int ptpegr_ts_bytes; + const struct sja1105_dynamic_table_ops *dyn_ops; + const struct sja1105_table_ops *static_ops; + const struct sja1105_regs *regs; + int (*ptp_cmd)(const void *ctx, const void *data); + int (*reset_cmd)(const void *ctx, const void *data); + int (*setup_rgmii_delay)(const void *ctx, int port); + /* Prototypes from include/net/dsa.h */ + int (*fdb_add_cmd)(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid); + int (*fdb_del_cmd)(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid); + const char *name; +}; + +struct sja1105_private { + struct sja1105_static_config static_config; + bool rgmii_rx_delay[SJA1105_NUM_PORTS]; + bool rgmii_tx_delay[SJA1105_NUM_PORTS]; + const struct sja1105_info *info; + struct gpio_desc *reset_gpio; + struct spi_device *spidev; + struct dsa_switch *ds; + struct sja1105_port ports[SJA1105_NUM_PORTS]; + struct ptp_clock_info ptp_caps; + struct ptp_clock *clock; + /* The cycle counter translates the PTP timestamps (based on + * a free-running counter) into a software time domain. + */ + struct cyclecounter tstamp_cc; + struct timecounter tstamp_tc; + struct delayed_work refresh_work; + /* Serializes all operations on the cycle counter */ + struct mutex ptp_lock; + /* Serializes transmission of management frames so that + * the switch doesn't confuse them with one another. + */ + struct mutex mgmt_lock; + struct sja1105_tagger_data tagger_data; +}; + +#include "sja1105_dynamic_config.h" +#include "sja1105_ptp.h" + +struct sja1105_spi_message { + u64 access; + u64 read_count; + u64 address; +}; + +typedef enum { + SPI_READ = 0, + SPI_WRITE = 1, +} sja1105_spi_rw_mode_t; + +/* From sja1105_spi.c */ +int sja1105_spi_send_packed_buf(const struct sja1105_private *priv, + sja1105_spi_rw_mode_t rw, u64 reg_addr, + void *packed_buf, size_t size_bytes); +int sja1105_spi_send_int(const struct sja1105_private *priv, + sja1105_spi_rw_mode_t rw, u64 reg_addr, + u64 *value, u64 size_bytes); +int sja1105_spi_send_long_packed_buf(const struct sja1105_private *priv, + sja1105_spi_rw_mode_t rw, u64 base_addr, + void *packed_buf, u64 buf_len); +int sja1105_static_config_upload(struct sja1105_private *priv); +int sja1105_inhibit_tx(const struct sja1105_private *priv, + unsigned long port_bitmap, bool tx_inhibited); + +extern struct sja1105_info sja1105e_info; +extern struct sja1105_info sja1105t_info; +extern struct sja1105_info sja1105p_info; +extern struct sja1105_info sja1105q_info; +extern struct sja1105_info sja1105r_info; +extern struct sja1105_info sja1105s_info; + +/* From sja1105_clocking.c */ + +typedef enum { + XMII_MAC = 0, + XMII_PHY = 1, +} sja1105_mii_role_t; + +typedef enum { + XMII_MODE_MII = 0, + XMII_MODE_RMII = 1, + XMII_MODE_RGMII = 2, +} sja1105_phy_interface_t; + +typedef enum { + SJA1105_SPEED_10MBPS = 3, + SJA1105_SPEED_100MBPS = 2, + SJA1105_SPEED_1000MBPS = 1, + SJA1105_SPEED_AUTO = 0, +} sja1105_speed_t; + +int sja1105pqrs_setup_rgmii_delay(const void *ctx, int port); +int sja1105_clocking_setup_port(struct sja1105_private *priv, int port); +int sja1105_clocking_setup(struct sja1105_private *priv); + +/* From sja1105_ethtool.c */ +void sja1105_get_ethtool_stats(struct dsa_switch *ds, int port, u64 *data); +void sja1105_get_strings(struct dsa_switch *ds, int port, + u32 stringset, u8 *data); +int sja1105_get_sset_count(struct dsa_switch *ds, int port, int sset); + +/* From sja1105_dynamic_config.c */ +int sja1105_dynamic_config_read(struct sja1105_private *priv, + enum sja1105_blk_idx blk_idx, + int index, void *entry); +int sja1105_dynamic_config_write(struct sja1105_private *priv, + enum sja1105_blk_idx blk_idx, + int index, void *entry, bool keep); + +enum sja1105_iotag { + SJA1105_C_TAG = 0, /* Inner VLAN header */ + SJA1105_S_TAG = 1, /* Outer VLAN header */ +}; + +u8 sja1105et_fdb_hash(struct sja1105_private *priv, const u8 *addr, u16 vid); +int sja1105et_fdb_add(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid); +int sja1105et_fdb_del(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid); +int sja1105pqrs_fdb_add(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid); +int sja1105pqrs_fdb_del(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid); + +/* Common implementations for the static and dynamic configs */ +size_t sja1105_l2_forwarding_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); +size_t sja1105pqrs_l2_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); +size_t sja1105et_l2_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); +size_t sja1105_vlan_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); +size_t sja1105pqrs_mac_config_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); + +#endif diff --git a/drivers/net/dsa/sja1105/sja1105_clocking.c b/drivers/net/dsa/sja1105/sja1105_clocking.c new file mode 100644 index 000000000000..608126a15d72 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_clocking.c @@ -0,0 +1,695 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* Copyright (c) 2016-2018, NXP Semiconductors + * Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com> + */ +#include <linux/packing.h> +#include "sja1105.h" + +#define SJA1105_SIZE_CGU_CMD 4 + +struct sja1105_cfg_pad_mii_tx { + u64 d32_os; + u64 d32_ipud; + u64 d10_os; + u64 d10_ipud; + u64 ctrl_os; + u64 ctrl_ipud; + u64 clk_os; + u64 clk_ih; + u64 clk_ipud; +}; + +struct sja1105_cfg_pad_mii_id { + u64 rxc_stable_ovr; + u64 rxc_delay; + u64 rxc_bypass; + u64 rxc_pd; + u64 txc_stable_ovr; + u64 txc_delay; + u64 txc_bypass; + u64 txc_pd; +}; + +/* UM10944 Table 82. + * IDIV_0_C to IDIV_4_C control registers + * (addr. 10000Bh to 10000Fh) + */ +struct sja1105_cgu_idiv { + u64 clksrc; + u64 autoblock; + u64 idiv; + u64 pd; +}; + +/* PLL_1_C control register + * + * SJA1105 E/T: UM10944 Table 81 (address 10000Ah) + * SJA1105 P/Q/R/S: UM11040 Table 116 (address 10000Ah) + */ +struct sja1105_cgu_pll_ctrl { + u64 pllclksrc; + u64 msel; + u64 autoblock; + u64 psel; + u64 direct; + u64 fbsel; + u64 bypass; + u64 pd; +}; + +enum { + CLKSRC_MII0_TX_CLK = 0x00, + CLKSRC_MII0_RX_CLK = 0x01, + CLKSRC_MII1_TX_CLK = 0x02, + CLKSRC_MII1_RX_CLK = 0x03, + CLKSRC_MII2_TX_CLK = 0x04, + CLKSRC_MII2_RX_CLK = 0x05, + CLKSRC_MII3_TX_CLK = 0x06, + CLKSRC_MII3_RX_CLK = 0x07, + CLKSRC_MII4_TX_CLK = 0x08, + CLKSRC_MII4_RX_CLK = 0x09, + CLKSRC_PLL0 = 0x0B, + CLKSRC_PLL1 = 0x0E, + CLKSRC_IDIV0 = 0x11, + CLKSRC_IDIV1 = 0x12, + CLKSRC_IDIV2 = 0x13, + CLKSRC_IDIV3 = 0x14, + CLKSRC_IDIV4 = 0x15, +}; + +/* UM10944 Table 83. + * MIIx clock control registers 1 to 30 + * (addresses 100013h to 100035h) + */ +struct sja1105_cgu_mii_ctrl { + u64 clksrc; + u64 autoblock; + u64 pd; +}; + +static void sja1105_cgu_idiv_packing(void *buf, struct sja1105_cgu_idiv *idiv, + enum packing_op op) +{ + const int size = 4; + + sja1105_packing(buf, &idiv->clksrc, 28, 24, size, op); + sja1105_packing(buf, &idiv->autoblock, 11, 11, size, op); + sja1105_packing(buf, &idiv->idiv, 5, 2, size, op); + sja1105_packing(buf, &idiv->pd, 0, 0, size, op); +} + +static int sja1105_cgu_idiv_config(struct sja1105_private *priv, int port, + bool enabled, int factor) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct device *dev = priv->ds->dev; + struct sja1105_cgu_idiv idiv; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + + if (enabled && factor != 1 && factor != 10) { + dev_err(dev, "idiv factor must be 1 or 10\n"); + return -ERANGE; + } + + /* Payload for packed_buf */ + idiv.clksrc = 0x0A; /* 25MHz */ + idiv.autoblock = 1; /* Block clk automatically */ + idiv.idiv = factor - 1; /* Divide by 1 or 10 */ + idiv.pd = enabled ? 0 : 1; /* Power down? */ + sja1105_cgu_idiv_packing(packed_buf, &idiv, PACK); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, + regs->cgu_idiv[port], packed_buf, + SJA1105_SIZE_CGU_CMD); +} + +static void +sja1105_cgu_mii_control_packing(void *buf, struct sja1105_cgu_mii_ctrl *cmd, + enum packing_op op) +{ + const int size = 4; + + sja1105_packing(buf, &cmd->clksrc, 28, 24, size, op); + sja1105_packing(buf, &cmd->autoblock, 11, 11, size, op); + sja1105_packing(buf, &cmd->pd, 0, 0, size, op); +} + +static int sja1105_cgu_mii_tx_clk_config(struct sja1105_private *priv, + int port, sja1105_mii_role_t role) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cgu_mii_ctrl mii_tx_clk; + const int mac_clk_sources[] = { + CLKSRC_MII0_TX_CLK, + CLKSRC_MII1_TX_CLK, + CLKSRC_MII2_TX_CLK, + CLKSRC_MII3_TX_CLK, + CLKSRC_MII4_TX_CLK, + }; + const int phy_clk_sources[] = { + CLKSRC_IDIV0, + CLKSRC_IDIV1, + CLKSRC_IDIV2, + CLKSRC_IDIV3, + CLKSRC_IDIV4, + }; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + int clksrc; + + if (role == XMII_MAC) + clksrc = mac_clk_sources[port]; + else + clksrc = phy_clk_sources[port]; + + /* Payload for packed_buf */ + mii_tx_clk.clksrc = clksrc; + mii_tx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ + mii_tx_clk.pd = 0; /* Power Down off => enabled */ + sja1105_cgu_mii_control_packing(packed_buf, &mii_tx_clk, PACK); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, + regs->mii_tx_clk[port], packed_buf, + SJA1105_SIZE_CGU_CMD); +} + +static int +sja1105_cgu_mii_rx_clk_config(struct sja1105_private *priv, int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cgu_mii_ctrl mii_rx_clk; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + const int clk_sources[] = { + CLKSRC_MII0_RX_CLK, + CLKSRC_MII1_RX_CLK, + CLKSRC_MII2_RX_CLK, + CLKSRC_MII3_RX_CLK, + CLKSRC_MII4_RX_CLK, + }; + + /* Payload for packed_buf */ + mii_rx_clk.clksrc = clk_sources[port]; + mii_rx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ + mii_rx_clk.pd = 0; /* Power Down off => enabled */ + sja1105_cgu_mii_control_packing(packed_buf, &mii_rx_clk, PACK); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, + regs->mii_rx_clk[port], packed_buf, + SJA1105_SIZE_CGU_CMD); +} + +static int +sja1105_cgu_mii_ext_tx_clk_config(struct sja1105_private *priv, int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cgu_mii_ctrl mii_ext_tx_clk; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + const int clk_sources[] = { + CLKSRC_IDIV0, + CLKSRC_IDIV1, + CLKSRC_IDIV2, + CLKSRC_IDIV3, + CLKSRC_IDIV4, + }; + + /* Payload for packed_buf */ + mii_ext_tx_clk.clksrc = clk_sources[port]; + mii_ext_tx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ + mii_ext_tx_clk.pd = 0; /* Power Down off => enabled */ + sja1105_cgu_mii_control_packing(packed_buf, &mii_ext_tx_clk, PACK); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, + regs->mii_ext_tx_clk[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static int +sja1105_cgu_mii_ext_rx_clk_config(struct sja1105_private *priv, int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cgu_mii_ctrl mii_ext_rx_clk; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + const int clk_sources[] = { + CLKSRC_IDIV0, + CLKSRC_IDIV1, + CLKSRC_IDIV2, + CLKSRC_IDIV3, + CLKSRC_IDIV4, + }; + + /* Payload for packed_buf */ + mii_ext_rx_clk.clksrc = clk_sources[port]; + mii_ext_rx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ + mii_ext_rx_clk.pd = 0; /* Power Down off => enabled */ + sja1105_cgu_mii_control_packing(packed_buf, &mii_ext_rx_clk, PACK); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, + regs->mii_ext_rx_clk[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static int sja1105_mii_clocking_setup(struct sja1105_private *priv, int port, + sja1105_mii_role_t role) +{ + struct device *dev = priv->ds->dev; + int rc; + + dev_dbg(dev, "Configuring MII-%s clocking\n", + (role == XMII_MAC) ? "MAC" : "PHY"); + /* If role is MAC, disable IDIV + * If role is PHY, enable IDIV and configure for 1/1 divider + */ + rc = sja1105_cgu_idiv_config(priv, port, (role == XMII_PHY), 1); + if (rc < 0) + return rc; + + /* Configure CLKSRC of MII_TX_CLK_n + * * If role is MAC, select TX_CLK_n + * * If role is PHY, select IDIV_n + */ + rc = sja1105_cgu_mii_tx_clk_config(priv, port, role); + if (rc < 0) + return rc; + + /* Configure CLKSRC of MII_RX_CLK_n + * Select RX_CLK_n + */ + rc = sja1105_cgu_mii_rx_clk_config(priv, port); + if (rc < 0) + return rc; + + if (role == XMII_PHY) { + /* Per MII spec, the PHY (which is us) drives the TX_CLK pin */ + + /* Configure CLKSRC of EXT_TX_CLK_n + * Select IDIV_n + */ + rc = sja1105_cgu_mii_ext_tx_clk_config(priv, port); + if (rc < 0) + return rc; + + /* Configure CLKSRC of EXT_RX_CLK_n + * Select IDIV_n + */ + rc = sja1105_cgu_mii_ext_rx_clk_config(priv, port); + if (rc < 0) + return rc; + } + return 0; +} + +static void +sja1105_cgu_pll_control_packing(void *buf, struct sja1105_cgu_pll_ctrl *cmd, + enum packing_op op) +{ + const int size = 4; + + sja1105_packing(buf, &cmd->pllclksrc, 28, 24, size, op); + sja1105_packing(buf, &cmd->msel, 23, 16, size, op); + sja1105_packing(buf, &cmd->autoblock, 11, 11, size, op); + sja1105_packing(buf, &cmd->psel, 9, 8, size, op); + sja1105_packing(buf, &cmd->direct, 7, 7, size, op); + sja1105_packing(buf, &cmd->fbsel, 6, 6, size, op); + sja1105_packing(buf, &cmd->bypass, 1, 1, size, op); + sja1105_packing(buf, &cmd->pd, 0, 0, size, op); +} + +static int sja1105_cgu_rgmii_tx_clk_config(struct sja1105_private *priv, + int port, sja1105_speed_t speed) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cgu_mii_ctrl txc; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + int clksrc; + + if (speed == SJA1105_SPEED_1000MBPS) { + clksrc = CLKSRC_PLL0; + } else { + int clk_sources[] = {CLKSRC_IDIV0, CLKSRC_IDIV1, CLKSRC_IDIV2, + CLKSRC_IDIV3, CLKSRC_IDIV4}; + clksrc = clk_sources[port]; + } + + /* RGMII: 125MHz for 1000, 25MHz for 100, 2.5MHz for 10 */ + txc.clksrc = clksrc; + /* Autoblock clk while changing clksrc */ + txc.autoblock = 1; + /* Power Down off => enabled */ + txc.pd = 0; + sja1105_cgu_mii_control_packing(packed_buf, &txc, PACK); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, + regs->rgmii_tx_clk[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +/* AGU */ +static void +sja1105_cfg_pad_mii_tx_packing(void *buf, struct sja1105_cfg_pad_mii_tx *cmd, + enum packing_op op) +{ + const int size = 4; + + sja1105_packing(buf, &cmd->d32_os, 28, 27, size, op); + sja1105_packing(buf, &cmd->d32_ipud, 25, 24, size, op); + sja1105_packing(buf, &cmd->d10_os, 20, 19, size, op); + sja1105_packing(buf, &cmd->d10_ipud, 17, 16, size, op); + sja1105_packing(buf, &cmd->ctrl_os, 12, 11, size, op); + sja1105_packing(buf, &cmd->ctrl_ipud, 9, 8, size, op); + sja1105_packing(buf, &cmd->clk_os, 4, 3, size, op); + sja1105_packing(buf, &cmd->clk_ih, 2, 2, size, op); + sja1105_packing(buf, &cmd->clk_ipud, 1, 0, size, op); +} + +static int sja1105_rgmii_cfg_pad_tx_config(struct sja1105_private *priv, + int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cfg_pad_mii_tx pad_mii_tx; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + + /* Payload */ + pad_mii_tx.d32_os = 3; /* TXD[3:2] output stage: */ + /* high noise/high speed */ + pad_mii_tx.d10_os = 3; /* TXD[1:0] output stage: */ + /* high noise/high speed */ + pad_mii_tx.d32_ipud = 2; /* TXD[3:2] input stage: */ + /* plain input (default) */ + pad_mii_tx.d10_ipud = 2; /* TXD[1:0] input stage: */ + /* plain input (default) */ + pad_mii_tx.ctrl_os = 3; /* TX_CTL / TX_ER output stage */ + pad_mii_tx.ctrl_ipud = 2; /* TX_CTL / TX_ER input stage (default) */ + pad_mii_tx.clk_os = 3; /* TX_CLK output stage */ + pad_mii_tx.clk_ih = 0; /* TX_CLK input hysteresis (default) */ + pad_mii_tx.clk_ipud = 2; /* TX_CLK input stage (default) */ + sja1105_cfg_pad_mii_tx_packing(packed_buf, &pad_mii_tx, PACK); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, + regs->pad_mii_tx[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static void +sja1105_cfg_pad_mii_id_packing(void *buf, struct sja1105_cfg_pad_mii_id *cmd, + enum packing_op op) +{ + const int size = SJA1105_SIZE_CGU_CMD; + + sja1105_packing(buf, &cmd->rxc_stable_ovr, 15, 15, size, op); + sja1105_packing(buf, &cmd->rxc_delay, 14, 10, size, op); + sja1105_packing(buf, &cmd->rxc_bypass, 9, 9, size, op); + sja1105_packing(buf, &cmd->rxc_pd, 8, 8, size, op); + sja1105_packing(buf, &cmd->txc_stable_ovr, 7, 7, size, op); + sja1105_packing(buf, &cmd->txc_delay, 6, 2, size, op); + sja1105_packing(buf, &cmd->txc_bypass, 1, 1, size, op); + sja1105_packing(buf, &cmd->txc_pd, 0, 0, size, op); +} + +/* Valid range in degrees is an integer between 73.8 and 101.7 */ +static inline u64 sja1105_rgmii_delay(u64 phase) +{ + /* UM11040.pdf: The delay in degree phase is 73.8 + delay_tune * 0.9. + * To avoid floating point operations we'll multiply by 10 + * and get 1 decimal point precision. + */ + phase *= 10; + return (phase - 738) / 9; +} + +/* The RGMII delay setup procedure is 2-step and gets called upon each + * .phylink_mac_config. Both are strategic. + * The reason is that the RX Tunable Delay Line of the SJA1105 MAC has issues + * with recovering from a frequency change of the link partner's RGMII clock. + * The easiest way to recover from this is to temporarily power down the TDL, + * as it will re-lock at the new frequency afterwards. + */ +int sja1105pqrs_setup_rgmii_delay(const void *ctx, int port) +{ + const struct sja1105_private *priv = ctx; + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cfg_pad_mii_id pad_mii_id = {0}; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + int rc; + + if (priv->rgmii_rx_delay[port]) + pad_mii_id.rxc_delay = sja1105_rgmii_delay(90); + if (priv->rgmii_tx_delay[port]) + pad_mii_id.txc_delay = sja1105_rgmii_delay(90); + + /* Stage 1: Turn the RGMII delay lines off. */ + pad_mii_id.rxc_bypass = 1; + pad_mii_id.rxc_pd = 1; + pad_mii_id.txc_bypass = 1; + pad_mii_id.txc_pd = 1; + sja1105_cfg_pad_mii_id_packing(packed_buf, &pad_mii_id, PACK); + + rc = sja1105_spi_send_packed_buf(priv, SPI_WRITE, + regs->pad_mii_id[port], + packed_buf, SJA1105_SIZE_CGU_CMD); + if (rc < 0) + return rc; + + /* Stage 2: Turn the RGMII delay lines on. */ + if (priv->rgmii_rx_delay[port]) { + pad_mii_id.rxc_bypass = 0; + pad_mii_id.rxc_pd = 0; + } + if (priv->rgmii_tx_delay[port]) { + pad_mii_id.txc_bypass = 0; + pad_mii_id.txc_pd = 0; + } + sja1105_cfg_pad_mii_id_packing(packed_buf, &pad_mii_id, PACK); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, + regs->pad_mii_id[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static int sja1105_rgmii_clocking_setup(struct sja1105_private *priv, int port, + sja1105_mii_role_t role) +{ + struct device *dev = priv->ds->dev; + struct sja1105_mac_config_entry *mac; + sja1105_speed_t speed; + int rc; + + mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries; + speed = mac[port].speed; + + dev_dbg(dev, "Configuring port %d RGMII at speed %dMbps\n", + port, speed); + + switch (speed) { + case SJA1105_SPEED_1000MBPS: + /* 1000Mbps, IDIV disabled (125 MHz) */ + rc = sja1105_cgu_idiv_config(priv, port, false, 1); + break; + case SJA1105_SPEED_100MBPS: + /* 100Mbps, IDIV enabled, divide by 1 (25 MHz) */ + rc = sja1105_cgu_idiv_config(priv, port, true, 1); + break; + case SJA1105_SPEED_10MBPS: + /* 10Mbps, IDIV enabled, divide by 10 (2.5 MHz) */ + rc = sja1105_cgu_idiv_config(priv, port, true, 10); + break; + case SJA1105_SPEED_AUTO: + /* Skip CGU configuration if there is no speed available + * (e.g. link is not established yet) + */ + dev_dbg(dev, "Speed not available, skipping CGU config\n"); + return 0; + default: + rc = -EINVAL; + } + + if (rc < 0) { + dev_err(dev, "Failed to configure idiv\n"); + return rc; + } + rc = sja1105_cgu_rgmii_tx_clk_config(priv, port, speed); + if (rc < 0) { + dev_err(dev, "Failed to configure RGMII Tx clock\n"); + return rc; + } + rc = sja1105_rgmii_cfg_pad_tx_config(priv, port); + if (rc < 0) { + dev_err(dev, "Failed to configure Tx pad registers\n"); + return rc; + } + if (!priv->info->setup_rgmii_delay) + return 0; + /* The role has no hardware effect for RGMII. However we use it as + * a proxy for this interface being a MAC-to-MAC connection, with + * the RGMII internal delays needing to be applied by us. + */ + if (role == XMII_MAC) + return 0; + + return priv->info->setup_rgmii_delay(priv, port); +} + +static int sja1105_cgu_rmii_ref_clk_config(struct sja1105_private *priv, + int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cgu_mii_ctrl ref_clk; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + const int clk_sources[] = { + CLKSRC_MII0_TX_CLK, + CLKSRC_MII1_TX_CLK, + CLKSRC_MII2_TX_CLK, + CLKSRC_MII3_TX_CLK, + CLKSRC_MII4_TX_CLK, + }; + + /* Payload for packed_buf */ + ref_clk.clksrc = clk_sources[port]; + ref_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ + ref_clk.pd = 0; /* Power Down off => enabled */ + sja1105_cgu_mii_control_packing(packed_buf, &ref_clk, PACK); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, + regs->rmii_ref_clk[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static int +sja1105_cgu_rmii_ext_tx_clk_config(struct sja1105_private *priv, int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cgu_mii_ctrl ext_tx_clk; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + + /* Payload for packed_buf */ + ext_tx_clk.clksrc = CLKSRC_PLL1; + ext_tx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ + ext_tx_clk.pd = 0; /* Power Down off => enabled */ + sja1105_cgu_mii_control_packing(packed_buf, &ext_tx_clk, PACK); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, + regs->rmii_ext_tx_clk[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static int sja1105_cgu_rmii_pll_config(struct sja1105_private *priv) +{ + const struct sja1105_regs *regs = priv->info->regs; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + struct sja1105_cgu_pll_ctrl pll = {0}; + struct device *dev = priv->ds->dev; + int rc; + + /* PLL1 must be enabled and output 50 Mhz. + * This is done by writing first 0x0A010941 to + * the PLL_1_C register and then deasserting + * power down (PD) 0x0A010940. + */ + + /* Step 1: PLL1 setup for 50Mhz */ + pll.pllclksrc = 0xA; + pll.msel = 0x1; + pll.autoblock = 0x1; + pll.psel = 0x1; + pll.direct = 0x0; + pll.fbsel = 0x1; + pll.bypass = 0x0; + pll.pd = 0x1; + + sja1105_cgu_pll_control_packing(packed_buf, &pll, PACK); + rc = sja1105_spi_send_packed_buf(priv, SPI_WRITE, regs->rmii_pll1, + packed_buf, SJA1105_SIZE_CGU_CMD); + if (rc < 0) { + dev_err(dev, "failed to configure PLL1 for 50MHz\n"); + return rc; + } + + /* Step 2: Enable PLL1 */ + pll.pd = 0x0; + + sja1105_cgu_pll_control_packing(packed_buf, &pll, PACK); + rc = sja1105_spi_send_packed_buf(priv, SPI_WRITE, regs->rmii_pll1, + packed_buf, SJA1105_SIZE_CGU_CMD); + if (rc < 0) { + dev_err(dev, "failed to enable PLL1\n"); + return rc; + } + return rc; +} + +static int sja1105_rmii_clocking_setup(struct sja1105_private *priv, int port, + sja1105_mii_role_t role) +{ + struct device *dev = priv->ds->dev; + int rc; + + dev_dbg(dev, "Configuring RMII-%s clocking\n", + (role == XMII_MAC) ? "MAC" : "PHY"); + /* AH1601.pdf chapter 2.5.1. Sources */ + if (role == XMII_MAC) { + /* Configure and enable PLL1 for 50Mhz output */ + rc = sja1105_cgu_rmii_pll_config(priv); + if (rc < 0) + return rc; + } + /* Disable IDIV for this port */ + rc = sja1105_cgu_idiv_config(priv, port, false, 1); + if (rc < 0) + return rc; + /* Source to sink mappings */ + rc = sja1105_cgu_rmii_ref_clk_config(priv, port); + if (rc < 0) + return rc; + if (role == XMII_MAC) { + rc = sja1105_cgu_rmii_ext_tx_clk_config(priv, port); + if (rc < 0) + return rc; + } + return 0; +} + +int sja1105_clocking_setup_port(struct sja1105_private *priv, int port) +{ + struct sja1105_xmii_params_entry *mii; + struct device *dev = priv->ds->dev; + sja1105_phy_interface_t phy_mode; + sja1105_mii_role_t role; + int rc; + + mii = priv->static_config.tables[BLK_IDX_XMII_PARAMS].entries; + + /* RGMII etc */ + phy_mode = mii->xmii_mode[port]; + /* MAC or PHY, for applicable types (not RGMII) */ + role = mii->phy_mac[port]; + + switch (phy_mode) { + case XMII_MODE_MII: + rc = sja1105_mii_clocking_setup(priv, port, role); + break; + case XMII_MODE_RMII: + rc = sja1105_rmii_clocking_setup(priv, port, role); + break; + case XMII_MODE_RGMII: + rc = sja1105_rgmii_clocking_setup(priv, port, role); + break; + default: + dev_err(dev, "Invalid interface mode specified: %d\n", + phy_mode); + return -EINVAL; + } + if (rc) + dev_err(dev, "Clocking setup for port %d failed: %d\n", + port, rc); + return rc; +} + +int sja1105_clocking_setup(struct sja1105_private *priv) +{ + int port, rc; + + for (port = 0; port < SJA1105_NUM_PORTS; port++) { + rc = sja1105_clocking_setup_port(priv, port); + if (rc < 0) + return rc; + } + return 0; +} diff --git a/drivers/net/dsa/sja1105/sja1105_dynamic_config.c b/drivers/net/dsa/sja1105/sja1105_dynamic_config.c new file mode 100644 index 000000000000..6bfb1696a6f2 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_dynamic_config.c @@ -0,0 +1,808 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com> + */ +#include "sja1105.h" + +/* In the dynamic configuration interface, the switch exposes a register-like + * view of some of the static configuration tables. + * Many times the field organization of the dynamic tables is abbreviated (not + * all fields are dynamically reconfigurable) and different from the static + * ones, but the key reason for having it is that we can spare a switch reset + * for settings that can be changed dynamically. + * + * This file creates a per-switch-family abstraction called + * struct sja1105_dynamic_table_ops and two operations that work with it: + * - sja1105_dynamic_config_write + * - sja1105_dynamic_config_read + * + * Compared to the struct sja1105_table_ops from sja1105_static_config.c, + * the dynamic accessors work with a compound buffer: + * + * packed_buf + * + * | + * V + * +-----------------------------------------+------------------+ + * | ENTRY BUFFER | COMMAND BUFFER | + * +-----------------------------------------+------------------+ + * + * <----------------------- packed_size ------------------------> + * + * The ENTRY BUFFER may or may not have the same layout, or size, as its static + * configuration table entry counterpart. When it does, the same packing + * function is reused (bar exceptional cases - see + * sja1105pqrs_dyn_l2_lookup_entry_packing). + * + * The reason for the COMMAND BUFFER being at the end is to be able to send + * a dynamic write command through a single SPI burst. By the time the switch + * reacts to the command, the ENTRY BUFFER is already populated with the data + * sent by the core. + * + * The COMMAND BUFFER is always SJA1105_SIZE_DYN_CMD bytes (one 32-bit word) in + * size. + * + * Sometimes the ENTRY BUFFER does not really exist (when the number of fields + * that can be reconfigured is small), then the switch repurposes some of the + * unused 32 bits of the COMMAND BUFFER to hold ENTRY data. + * + * The key members of struct sja1105_dynamic_table_ops are: + * - .entry_packing: A function that deals with packing an ENTRY structure + * into an SPI buffer, or retrieving an ENTRY structure + * from one. + * The @packed_buf pointer it's given does always point to + * the ENTRY portion of the buffer. + * - .cmd_packing: A function that deals with packing/unpacking the COMMAND + * structure to/from the SPI buffer. + * It is given the same @packed_buf pointer as .entry_packing, + * so most of the time, the @packed_buf points *behind* the + * COMMAND offset inside the buffer. + * To access the COMMAND portion of the buffer, the function + * knows its correct offset. + * Giving both functions the same pointer is handy because in + * extreme cases (see sja1105pqrs_dyn_l2_lookup_entry_packing) + * the .entry_packing is able to jump to the COMMAND portion, + * or vice-versa (sja1105pqrs_l2_lookup_cmd_packing). + * - .access: A bitmap of: + * OP_READ: Set if the hardware manual marks the ENTRY portion of the + * dynamic configuration table buffer as R (readable) after + * an SPI read command (the switch will populate the buffer). + * OP_WRITE: Set if the manual marks the ENTRY portion of the dynamic + * table buffer as W (writable) after an SPI write command + * (the switch will read the fields provided in the buffer). + * OP_DEL: Set if the manual says the VALIDENT bit is supported in the + * COMMAND portion of this dynamic config buffer (i.e. the + * specified entry can be invalidated through a SPI write + * command). + * OP_SEARCH: Set if the manual says that the index of an entry can + * be retrieved in the COMMAND portion of the buffer based + * on its ENTRY portion, as a result of a SPI write command. + * Only the TCAM-based FDB table on SJA1105 P/Q/R/S supports + * this. + * - .max_entry_count: The number of entries, counting from zero, that can be + * reconfigured through the dynamic interface. If a static + * table can be reconfigured at all dynamically, this + * number always matches the maximum number of supported + * static entries. + * - .packed_size: The length in bytes of the compound ENTRY + COMMAND BUFFER. + * Note that sometimes the compound buffer may contain holes in + * it (see sja1105_vlan_lookup_cmd_packing). The @packed_buf is + * contiguous however, so @packed_size includes any unused + * bytes. + * - .addr: The base SPI address at which the buffer must be written to the + * switch's memory. When looking at the hardware manual, this must + * always match the lowest documented address for the ENTRY, and not + * that of the COMMAND, since the other 32-bit words will follow along + * at the correct addresses. + */ + +#define SJA1105_SIZE_DYN_CMD 4 + +#define SJA1105ET_SIZE_MAC_CONFIG_DYN_ENTRY \ + SJA1105_SIZE_DYN_CMD + +#define SJA1105ET_SIZE_L2_LOOKUP_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + SJA1105ET_SIZE_L2_LOOKUP_ENTRY) + +#define SJA1105PQRS_SIZE_L2_LOOKUP_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY) + +#define SJA1105_SIZE_VLAN_LOOKUP_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + 4 + SJA1105_SIZE_VLAN_LOOKUP_ENTRY) + +#define SJA1105_SIZE_L2_FORWARDING_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + SJA1105_SIZE_L2_FORWARDING_ENTRY) + +#define SJA1105ET_SIZE_MAC_CONFIG_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + SJA1105ET_SIZE_MAC_CONFIG_DYN_ENTRY) + +#define SJA1105PQRS_SIZE_MAC_CONFIG_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY) + +#define SJA1105ET_SIZE_L2_LOOKUP_PARAMS_DYN_CMD \ + SJA1105_SIZE_DYN_CMD + +#define SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD \ + SJA1105_SIZE_DYN_CMD + +#define SJA1105_MAX_DYN_CMD_SIZE \ + SJA1105PQRS_SIZE_MAC_CONFIG_DYN_CMD + +struct sja1105_dyn_cmd { + bool search; + u64 valid; + u64 rdwrset; + u64 errors; + u64 valident; + u64 index; +}; + +enum sja1105_hostcmd { + SJA1105_HOSTCMD_SEARCH = 1, + SJA1105_HOSTCMD_READ = 2, + SJA1105_HOSTCMD_WRITE = 3, + SJA1105_HOSTCMD_INVALIDATE = 4, +}; + +static void +sja1105pqrs_l2_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY; + const int size = SJA1105_SIZE_DYN_CMD; + u64 hostcmd; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->rdwrset, 30, 30, size, op); + sja1105_packing(p, &cmd->errors, 29, 29, size, op); + sja1105_packing(p, &cmd->valident, 27, 27, size, op); + + /* VALIDENT is supposed to indicate "keep or not", but in SJA1105 E/T, + * using it to delete a management route was unsupported. UM10944 + * said about it: + * + * In case of a write access with the MGMTROUTE flag set, + * the flag will be ignored. It will always be found cleared + * for read accesses with the MGMTROUTE flag set. + * + * SJA1105 P/Q/R/S keeps the same behavior w.r.t. VALIDENT, but there + * is now another flag called HOSTCMD which does more stuff (quoting + * from UM11040): + * + * A write request is accepted only when HOSTCMD is set to write host + * or invalid. A read request is accepted only when HOSTCMD is set to + * search host or read host. + * + * So it is possible to translate a RDWRSET/VALIDENT combination into + * HOSTCMD so that we keep the dynamic command API in place, and + * at the same time achieve compatibility with the management route + * command structure. + */ + if (cmd->rdwrset == SPI_READ) { + if (cmd->search) + hostcmd = SJA1105_HOSTCMD_SEARCH; + else + hostcmd = SJA1105_HOSTCMD_READ; + } else { + /* SPI_WRITE */ + if (cmd->valident) + hostcmd = SJA1105_HOSTCMD_WRITE; + else + hostcmd = SJA1105_HOSTCMD_INVALIDATE; + } + sja1105_packing(p, &hostcmd, 25, 23, size, op); + + /* Hack - The hardware takes the 'index' field within + * struct sja1105_l2_lookup_entry as the index on which this command + * will operate. However it will ignore everything else, so 'index' + * is logically part of command but physically part of entry. + * Populate the 'index' entry field from within the command callback, + * such that our API doesn't need to ask for a full-blown entry + * structure when e.g. a delete is requested. + */ + sja1105_packing(buf, &cmd->index, 15, 6, + SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY, op); +} + +/* The switch is so retarded that it makes our command/entry abstraction + * crumble apart. + * + * On P/Q/R/S, the switch tries to say whether a FDB entry + * is statically programmed or dynamically learned via a flag called LOCKEDS. + * The hardware manual says about this fiels: + * + * On write will specify the format of ENTRY. + * On read the flag will be found cleared at times the VALID flag is found + * set. The flag will also be found cleared in response to a read having the + * MGMTROUTE flag set. In response to a read with the MGMTROUTE flag + * cleared, the flag be set if the most recent access operated on an entry + * that was either loaded by configuration or through dynamic reconfiguration + * (as opposed to automatically learned entries). + * + * The trouble with this flag is that it's part of the *command* to access the + * dynamic interface, and not part of the *entry* retrieved from it. + * Otherwise said, for a sja1105_dynamic_config_read, LOCKEDS is supposed to be + * an output from the switch into the command buffer, and for a + * sja1105_dynamic_config_write, the switch treats LOCKEDS as an input + * (hence we can write either static, or automatically learned entries, from + * the core). + * But the manual contradicts itself in the last phrase where it says that on + * read, LOCKEDS will be set to 1 for all FDB entries written through the + * dynamic interface (therefore, the value of LOCKEDS from the + * sja1105_dynamic_config_write is not really used for anything, it'll store a + * 1 anyway). + * This means you can't really write a FDB entry with LOCKEDS=0 (automatically + * learned) into the switch, which kind of makes sense. + * As for reading through the dynamic interface, it doesn't make too much sense + * to put LOCKEDS into the command, since the switch will inevitably have to + * ignore it (otherwise a command would be like "read the FDB entry 123, but + * only if it's dynamically learned" <- well how am I supposed to know?) and + * just use it as an output buffer for its findings. But guess what... that's + * what the entry buffer is for! + * Unfortunately, what really breaks this abstraction is the fact that it + * wasn't designed having the fact in mind that the switch can output + * entry-related data as writeback through the command buffer. + * However, whether a FDB entry is statically or dynamically learned *is* part + * of the entry and not the command data, no matter what the switch thinks. + * In order to do that, we'll need to wrap around the + * sja1105pqrs_l2_lookup_entry_packing from sja1105_static_config.c, and take + * a peek outside of the caller-supplied @buf (the entry buffer), to reach the + * command buffer. + */ +static size_t +sja1105pqrs_dyn_l2_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_l2_lookup_entry *entry = entry_ptr; + u8 *cmd = buf + SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(cmd, &entry->lockeds, 28, 28, size, op); + + return sja1105pqrs_l2_lookup_entry_packing(buf, entry_ptr, op); +} + +static void +sja1105et_l2_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105ET_SIZE_L2_LOOKUP_ENTRY; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->rdwrset, 30, 30, size, op); + sja1105_packing(p, &cmd->errors, 29, 29, size, op); + sja1105_packing(p, &cmd->valident, 27, 27, size, op); + /* Hack - see comments above. */ + sja1105_packing(buf, &cmd->index, 29, 20, + SJA1105ET_SIZE_L2_LOOKUP_ENTRY, op); +} + +static void +sja1105et_mgmt_route_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105ET_SIZE_L2_LOOKUP_ENTRY; + u64 mgmtroute = 1; + + sja1105et_l2_lookup_cmd_packing(buf, cmd, op); + if (op == PACK) + sja1105_pack(p, &mgmtroute, 26, 26, SJA1105_SIZE_DYN_CMD); +} + +static size_t sja1105et_mgmt_route_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_mgmt_entry *entry = entry_ptr; + const size_t size = SJA1105ET_SIZE_L2_LOOKUP_ENTRY; + + /* UM10944: To specify if a PTP egress timestamp shall be captured on + * each port upon transmission of the frame, the LSB of VLANID in the + * ENTRY field provided by the host must be set. + * Bit 1 of VLANID then specifies the register where the timestamp for + * this port is stored in. + */ + sja1105_packing(buf, &entry->tsreg, 85, 85, size, op); + sja1105_packing(buf, &entry->takets, 84, 84, size, op); + sja1105_packing(buf, &entry->macaddr, 83, 36, size, op); + sja1105_packing(buf, &entry->destports, 35, 31, size, op); + sja1105_packing(buf, &entry->enfport, 30, 30, size, op); + return size; +} + +static void +sja1105pqrs_mgmt_route_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY; + u64 mgmtroute = 1; + + sja1105pqrs_l2_lookup_cmd_packing(buf, cmd, op); + if (op == PACK) + sja1105_pack(p, &mgmtroute, 26, 26, SJA1105_SIZE_DYN_CMD); +} + +static size_t sja1105pqrs_mgmt_route_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY; + struct sja1105_mgmt_entry *entry = entry_ptr; + + /* In P/Q/R/S, enfport got renamed to mgmtvalid, but its purpose + * is the same (driver uses it to confirm that frame was sent). + * So just keep the name from E/T. + */ + sja1105_packing(buf, &entry->tsreg, 71, 71, size, op); + sja1105_packing(buf, &entry->takets, 70, 70, size, op); + sja1105_packing(buf, &entry->macaddr, 69, 22, size, op); + sja1105_packing(buf, &entry->destports, 21, 17, size, op); + sja1105_packing(buf, &entry->enfport, 16, 16, size, op); + return size; +} + +/* In E/T, entry is at addresses 0x27-0x28. There is a 4 byte gap at 0x29, + * and command is at 0x2a. Similarly in P/Q/R/S there is a 1 register gap + * between entry (0x2d, 0x2e) and command (0x30). + */ +static void +sja1105_vlan_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105_SIZE_VLAN_LOOKUP_ENTRY + 4; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->rdwrset, 30, 30, size, op); + sja1105_packing(p, &cmd->valident, 27, 27, size, op); + /* Hack - see comments above, applied for 'vlanid' field of + * struct sja1105_vlan_lookup_entry. + */ + sja1105_packing(buf, &cmd->index, 38, 27, + SJA1105_SIZE_VLAN_LOOKUP_ENTRY, op); +} + +static void +sja1105_l2_forwarding_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105_SIZE_L2_FORWARDING_ENTRY; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->errors, 30, 30, size, op); + sja1105_packing(p, &cmd->rdwrset, 29, 29, size, op); + sja1105_packing(p, &cmd->index, 4, 0, size, op); +} + +static void +sja1105et_mac_config_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + const int size = SJA1105_SIZE_DYN_CMD; + /* Yup, user manual definitions are reversed */ + u8 *reg1 = buf + 4; + + sja1105_packing(reg1, &cmd->valid, 31, 31, size, op); + sja1105_packing(reg1, &cmd->index, 26, 24, size, op); +} + +static size_t sja1105et_mac_config_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const int size = SJA1105ET_SIZE_MAC_CONFIG_DYN_ENTRY; + struct sja1105_mac_config_entry *entry = entry_ptr; + /* Yup, user manual definitions are reversed */ + u8 *reg1 = buf + 4; + u8 *reg2 = buf; + + sja1105_packing(reg1, &entry->speed, 30, 29, size, op); + sja1105_packing(reg1, &entry->drpdtag, 23, 23, size, op); + sja1105_packing(reg1, &entry->drpuntag, 22, 22, size, op); + sja1105_packing(reg1, &entry->retag, 21, 21, size, op); + sja1105_packing(reg1, &entry->dyn_learn, 20, 20, size, op); + sja1105_packing(reg1, &entry->egress, 19, 19, size, op); + sja1105_packing(reg1, &entry->ingress, 18, 18, size, op); + sja1105_packing(reg1, &entry->ing_mirr, 17, 17, size, op); + sja1105_packing(reg1, &entry->egr_mirr, 16, 16, size, op); + sja1105_packing(reg1, &entry->vlanprio, 14, 12, size, op); + sja1105_packing(reg1, &entry->vlanid, 11, 0, size, op); + sja1105_packing(reg2, &entry->tp_delin, 31, 16, size, op); + sja1105_packing(reg2, &entry->tp_delout, 15, 0, size, op); + /* MAC configuration table entries which can't be reconfigured: + * top, base, enabled, ifg, maxage, drpnona664 + */ + /* Bogus return value, not used anywhere */ + return 0; +} + +static void +sja1105pqrs_mac_config_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + const int size = SJA1105ET_SIZE_MAC_CONFIG_DYN_ENTRY; + u8 *p = buf + SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->errors, 30, 30, size, op); + sja1105_packing(p, &cmd->rdwrset, 29, 29, size, op); + sja1105_packing(p, &cmd->index, 2, 0, size, op); +} + +static void +sja1105et_l2_lookup_params_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + sja1105_packing(buf, &cmd->valid, 31, 31, + SJA1105ET_SIZE_L2_LOOKUP_PARAMS_DYN_CMD, op); +} + +static size_t +sja1105et_l2_lookup_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_l2_lookup_params_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->poly, 7, 0, + SJA1105ET_SIZE_L2_LOOKUP_PARAMS_DYN_CMD, op); + /* Bogus return value, not used anywhere */ + return 0; +} + +static void +sja1105et_general_params_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + const int size = SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD; + + sja1105_packing(buf, &cmd->valid, 31, 31, size, op); + sja1105_packing(buf, &cmd->errors, 30, 30, size, op); +} + +static size_t +sja1105et_general_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_general_params_entry *entry = entry_ptr; + const int size = SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD; + + sja1105_packing(buf, &entry->mirr_port, 2, 0, size, op); + /* Bogus return value, not used anywhere */ + return 0; +} + +#define OP_READ BIT(0) +#define OP_WRITE BIT(1) +#define OP_DEL BIT(2) +#define OP_SEARCH BIT(3) + +/* SJA1105E/T: First generation */ +struct sja1105_dynamic_table_ops sja1105et_dyn_ops[BLK_IDX_MAX_DYN] = { + [BLK_IDX_L2_LOOKUP] = { + .entry_packing = sja1105et_l2_lookup_entry_packing, + .cmd_packing = sja1105et_l2_lookup_cmd_packing, + .access = (OP_READ | OP_WRITE | OP_DEL), + .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, + .packed_size = SJA1105ET_SIZE_L2_LOOKUP_DYN_CMD, + .addr = 0x20, + }, + [BLK_IDX_MGMT_ROUTE] = { + .entry_packing = sja1105et_mgmt_route_entry_packing, + .cmd_packing = sja1105et_mgmt_route_cmd_packing, + .access = (OP_READ | OP_WRITE), + .max_entry_count = SJA1105_NUM_PORTS, + .packed_size = SJA1105ET_SIZE_L2_LOOKUP_DYN_CMD, + .addr = 0x20, + }, + [BLK_IDX_L2_POLICING] = {0}, + [BLK_IDX_VLAN_LOOKUP] = { + .entry_packing = sja1105_vlan_lookup_entry_packing, + .cmd_packing = sja1105_vlan_lookup_cmd_packing, + .access = (OP_WRITE | OP_DEL), + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + .packed_size = SJA1105_SIZE_VLAN_LOOKUP_DYN_CMD, + .addr = 0x27, + }, + [BLK_IDX_L2_FORWARDING] = { + .entry_packing = sja1105_l2_forwarding_entry_packing, + .cmd_packing = sja1105_l2_forwarding_cmd_packing, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, + .access = OP_WRITE, + .packed_size = SJA1105_SIZE_L2_FORWARDING_DYN_CMD, + .addr = 0x24, + }, + [BLK_IDX_MAC_CONFIG] = { + .entry_packing = sja1105et_mac_config_entry_packing, + .cmd_packing = sja1105et_mac_config_cmd_packing, + .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, + .access = OP_WRITE, + .packed_size = SJA1105ET_SIZE_MAC_CONFIG_DYN_CMD, + .addr = 0x36, + }, + [BLK_IDX_L2_LOOKUP_PARAMS] = { + .entry_packing = sja1105et_l2_lookup_params_entry_packing, + .cmd_packing = sja1105et_l2_lookup_params_cmd_packing, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + .access = OP_WRITE, + .packed_size = SJA1105ET_SIZE_L2_LOOKUP_PARAMS_DYN_CMD, + .addr = 0x38, + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = {0}, + [BLK_IDX_AVB_PARAMS] = {0}, + [BLK_IDX_GENERAL_PARAMS] = { + .entry_packing = sja1105et_general_params_entry_packing, + .cmd_packing = sja1105et_general_params_cmd_packing, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + .access = OP_WRITE, + .packed_size = SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD, + .addr = 0x34, + }, + [BLK_IDX_XMII_PARAMS] = {0}, +}; + +/* SJA1105P/Q/R/S: Second generation */ +struct sja1105_dynamic_table_ops sja1105pqrs_dyn_ops[BLK_IDX_MAX_DYN] = { + [BLK_IDX_L2_LOOKUP] = { + .entry_packing = sja1105pqrs_dyn_l2_lookup_entry_packing, + .cmd_packing = sja1105pqrs_l2_lookup_cmd_packing, + .access = (OP_READ | OP_WRITE | OP_DEL | OP_SEARCH), + .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, + .packed_size = SJA1105PQRS_SIZE_L2_LOOKUP_DYN_CMD, + .addr = 0x24, + }, + [BLK_IDX_MGMT_ROUTE] = { + .entry_packing = sja1105pqrs_mgmt_route_entry_packing, + .cmd_packing = sja1105pqrs_mgmt_route_cmd_packing, + .access = (OP_READ | OP_WRITE | OP_DEL | OP_SEARCH), + .max_entry_count = SJA1105_NUM_PORTS, + .packed_size = SJA1105PQRS_SIZE_L2_LOOKUP_DYN_CMD, + .addr = 0x24, + }, + [BLK_IDX_L2_POLICING] = {0}, + [BLK_IDX_VLAN_LOOKUP] = { + .entry_packing = sja1105_vlan_lookup_entry_packing, + .cmd_packing = sja1105_vlan_lookup_cmd_packing, + .access = (OP_READ | OP_WRITE | OP_DEL), + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + .packed_size = SJA1105_SIZE_VLAN_LOOKUP_DYN_CMD, + .addr = 0x2D, + }, + [BLK_IDX_L2_FORWARDING] = { + .entry_packing = sja1105_l2_forwarding_entry_packing, + .cmd_packing = sja1105_l2_forwarding_cmd_packing, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, + .access = OP_WRITE, + .packed_size = SJA1105_SIZE_L2_FORWARDING_DYN_CMD, + .addr = 0x2A, + }, + [BLK_IDX_MAC_CONFIG] = { + .entry_packing = sja1105pqrs_mac_config_entry_packing, + .cmd_packing = sja1105pqrs_mac_config_cmd_packing, + .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, + .access = (OP_READ | OP_WRITE), + .packed_size = SJA1105PQRS_SIZE_MAC_CONFIG_DYN_CMD, + .addr = 0x4B, + }, + [BLK_IDX_L2_LOOKUP_PARAMS] = { + .entry_packing = sja1105et_l2_lookup_params_entry_packing, + .cmd_packing = sja1105et_l2_lookup_params_cmd_packing, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + .access = (OP_READ | OP_WRITE), + .packed_size = SJA1105ET_SIZE_L2_LOOKUP_PARAMS_DYN_CMD, + .addr = 0x38, + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = {0}, + [BLK_IDX_AVB_PARAMS] = {0}, + [BLK_IDX_GENERAL_PARAMS] = { + .entry_packing = sja1105et_general_params_entry_packing, + .cmd_packing = sja1105et_general_params_cmd_packing, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + .access = OP_WRITE, + .packed_size = SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD, + .addr = 0x34, + }, + [BLK_IDX_XMII_PARAMS] = {0}, +}; + +/* Provides read access to the settings through the dynamic interface + * of the switch. + * @blk_idx is used as key to select from the sja1105_dynamic_table_ops. + * The selection is limited by the hardware in respect to which + * configuration blocks can be read through the dynamic interface. + * @index is used to retrieve a particular table entry. If negative, + * (and if the @blk_idx supports the searching operation) a search + * is performed by the @entry parameter. + * @entry Type-casted to an unpacked structure that holds a table entry + * of the type specified in @blk_idx. + * Usually an output argument. If @index is negative, then this + * argument is used as input/output: it should be pre-populated + * with the element to search for. Entries which support the + * search operation will have an "index" field (not the @index + * argument to this function) and that is where the found index + * will be returned (or left unmodified - thus negative - if not + * found). + */ +int sja1105_dynamic_config_read(struct sja1105_private *priv, + enum sja1105_blk_idx blk_idx, + int index, void *entry) +{ + const struct sja1105_dynamic_table_ops *ops; + struct sja1105_dyn_cmd cmd = {0}; + /* SPI payload buffer */ + u8 packed_buf[SJA1105_MAX_DYN_CMD_SIZE] = {0}; + int retries = 3; + int rc; + + if (blk_idx >= BLK_IDX_MAX_DYN) + return -ERANGE; + + ops = &priv->info->dyn_ops[blk_idx]; + + if (index >= 0 && index >= ops->max_entry_count) + return -ERANGE; + if (index < 0 && !(ops->access & OP_SEARCH)) + return -EOPNOTSUPP; + if (!(ops->access & OP_READ)) + return -EOPNOTSUPP; + if (ops->packed_size > SJA1105_MAX_DYN_CMD_SIZE) + return -ERANGE; + if (!ops->cmd_packing) + return -EOPNOTSUPP; + if (!ops->entry_packing) + return -EOPNOTSUPP; + + cmd.valid = true; /* Trigger action on table entry */ + cmd.rdwrset = SPI_READ; /* Action is read */ + if (index < 0) { + /* Avoid copying a signed negative number to an u64 */ + cmd.index = 0; + cmd.search = true; + } else { + cmd.index = index; + cmd.search = false; + } + cmd.valident = true; + ops->cmd_packing(packed_buf, &cmd, PACK); + + if (cmd.search) + ops->entry_packing(packed_buf, entry, PACK); + + /* Send SPI write operation: read config table entry */ + rc = sja1105_spi_send_packed_buf(priv, SPI_WRITE, ops->addr, + packed_buf, ops->packed_size); + if (rc < 0) + return rc; + + /* Loop until we have confirmation that hardware has finished + * processing the command and has cleared the VALID field + */ + do { + memset(packed_buf, 0, ops->packed_size); + + /* Retrieve the read operation's result */ + rc = sja1105_spi_send_packed_buf(priv, SPI_READ, ops->addr, + packed_buf, ops->packed_size); + if (rc < 0) + return rc; + + cmd = (struct sja1105_dyn_cmd) {0}; + ops->cmd_packing(packed_buf, &cmd, UNPACK); + /* UM10944: [valident] will always be found cleared + * during a read access with MGMTROUTE set. + * So don't error out in that case. + */ + if (!cmd.valident && blk_idx != BLK_IDX_MGMT_ROUTE) + return -ENOENT; + cpu_relax(); + } while (cmd.valid && --retries); + + if (cmd.valid) + return -ETIMEDOUT; + + /* Don't dereference possibly NULL pointer - maybe caller + * only wanted to see whether the entry existed or not. + */ + if (entry) + ops->entry_packing(packed_buf, entry, UNPACK); + return 0; +} + +int sja1105_dynamic_config_write(struct sja1105_private *priv, + enum sja1105_blk_idx blk_idx, + int index, void *entry, bool keep) +{ + const struct sja1105_dynamic_table_ops *ops; + struct sja1105_dyn_cmd cmd = {0}; + /* SPI payload buffer */ + u8 packed_buf[SJA1105_MAX_DYN_CMD_SIZE] = {0}; + int rc; + + if (blk_idx >= BLK_IDX_MAX_DYN) + return -ERANGE; + + ops = &priv->info->dyn_ops[blk_idx]; + + if (index >= ops->max_entry_count) + return -ERANGE; + if (index < 0) + return -ERANGE; + if (!(ops->access & OP_WRITE)) + return -EOPNOTSUPP; + if (!keep && !(ops->access & OP_DEL)) + return -EOPNOTSUPP; + if (ops->packed_size > SJA1105_MAX_DYN_CMD_SIZE) + return -ERANGE; + + cmd.valident = keep; /* If false, deletes entry */ + cmd.valid = true; /* Trigger action on table entry */ + cmd.rdwrset = SPI_WRITE; /* Action is write */ + cmd.index = index; + + if (!ops->cmd_packing) + return -EOPNOTSUPP; + ops->cmd_packing(packed_buf, &cmd, PACK); + + if (!ops->entry_packing) + return -EOPNOTSUPP; + /* Don't dereference potentially NULL pointer if just + * deleting a table entry is what was requested. For cases + * where 'index' field is physically part of entry structure, + * and needed here, we deal with that in the cmd_packing callback. + */ + if (keep) + ops->entry_packing(packed_buf, entry, PACK); + + /* Send SPI write operation: read config table entry */ + rc = sja1105_spi_send_packed_buf(priv, SPI_WRITE, ops->addr, + packed_buf, ops->packed_size); + if (rc < 0) + return rc; + + cmd = (struct sja1105_dyn_cmd) {0}; + ops->cmd_packing(packed_buf, &cmd, UNPACK); + if (cmd.errors) + return -EINVAL; + + return 0; +} + +static u8 sja1105_crc8_add(u8 crc, u8 byte, u8 poly) +{ + int i; + + for (i = 0; i < 8; i++) { + if ((crc ^ byte) & (1 << 7)) { + crc <<= 1; + crc ^= poly; + } else { + crc <<= 1; + } + byte <<= 1; + } + return crc; +} + +/* CRC8 algorithm with non-reversed input, non-reversed output, + * no input xor and no output xor. Code customized for receiving + * the SJA1105 E/T FDB keys (vlanid, macaddr) as input. CRC polynomial + * is also received as argument in the Koopman notation that the switch + * hardware stores it in. + */ +u8 sja1105et_fdb_hash(struct sja1105_private *priv, const u8 *addr, u16 vid) +{ + struct sja1105_l2_lookup_params_entry *l2_lookup_params = + priv->static_config.tables[BLK_IDX_L2_LOOKUP_PARAMS].entries; + u64 poly_koopman = l2_lookup_params->poly; + /* Convert polynomial from Koopman to 'normal' notation */ + u8 poly = (u8)(1 + (poly_koopman << 1)); + u64 vlanid = l2_lookup_params->shared_learn ? 0 : vid; + u64 input = (vlanid << 48) | ether_addr_to_u64(addr); + u8 crc = 0; /* seed */ + int i; + + /* Mask the eight bytes starting from MSB one at a time */ + for (i = 56; i >= 0; i -= 8) { + u8 byte = (input & (0xffull << i)) >> i; + + crc = sja1105_crc8_add(crc, byte, poly); + } + return crc; +} diff --git a/drivers/net/dsa/sja1105/sja1105_dynamic_config.h b/drivers/net/dsa/sja1105/sja1105_dynamic_config.h new file mode 100644 index 000000000000..740dadf43f01 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_dynamic_config.h @@ -0,0 +1,40 @@ +/* SPDX-License-Identifier: GPL-2.0 + * Copyright (c) 2019, Vladimir Oltean <olteanv@gmail.com> + */ +#ifndef _SJA1105_DYNAMIC_CONFIG_H +#define _SJA1105_DYNAMIC_CONFIG_H + +#include "sja1105.h" +#include <linux/packing.h> + +/* Special index that can be used for sja1105_dynamic_config_read */ +#define SJA1105_SEARCH -1 + +struct sja1105_dyn_cmd; + +struct sja1105_dynamic_table_ops { + /* This returns size_t just to keep same prototype as the + * static config ops, of which we are reusing some functions. + */ + size_t (*entry_packing)(void *buf, void *entry_ptr, enum packing_op op); + void (*cmd_packing)(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op); + size_t max_entry_count; + size_t packed_size; + u64 addr; + u8 access; +}; + +struct sja1105_mgmt_entry { + u64 tsreg; + u64 takets; + u64 macaddr; + u64 destports; + u64 enfport; + u64 index; +}; + +extern struct sja1105_dynamic_table_ops sja1105et_dyn_ops[BLK_IDX_MAX_DYN]; +extern struct sja1105_dynamic_table_ops sja1105pqrs_dyn_ops[BLK_IDX_MAX_DYN]; + +#endif diff --git a/drivers/net/dsa/sja1105/sja1105_ethtool.c b/drivers/net/dsa/sja1105/sja1105_ethtool.c new file mode 100644 index 000000000000..ab581a28cd41 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_ethtool.c @@ -0,0 +1,419 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com> + */ +#include "sja1105.h" + +#define SJA1105_SIZE_MAC_AREA (0x02 * 4) +#define SJA1105_SIZE_HL1_AREA (0x10 * 4) +#define SJA1105_SIZE_HL2_AREA (0x4 * 4) +#define SJA1105_SIZE_QLEVEL_AREA (0x8 * 4) /* 0x4 to 0xB */ + +struct sja1105_port_status_mac { + u64 n_runt; + u64 n_soferr; + u64 n_alignerr; + u64 n_miierr; + u64 typeerr; + u64 sizeerr; + u64 tctimeout; + u64 priorerr; + u64 nomaster; + u64 memov; + u64 memerr; + u64 invtyp; + u64 intcyov; + u64 domerr; + u64 pcfbagdrop; + u64 spcprior; + u64 ageprior; + u64 portdrop; + u64 lendrop; + u64 bagdrop; + u64 policeerr; + u64 drpnona664err; + u64 spcerr; + u64 agedrp; +}; + +struct sja1105_port_status_hl1 { + u64 n_n664err; + u64 n_vlanerr; + u64 n_unreleased; + u64 n_sizeerr; + u64 n_crcerr; + u64 n_vlnotfound; + u64 n_ctpolerr; + u64 n_polerr; + u64 n_rxfrmsh; + u64 n_rxfrm; + u64 n_rxbytesh; + u64 n_rxbyte; + u64 n_txfrmsh; + u64 n_txfrm; + u64 n_txbytesh; + u64 n_txbyte; +}; + +struct sja1105_port_status_hl2 { + u64 n_qfull; + u64 n_part_drop; + u64 n_egr_disabled; + u64 n_not_reach; + u64 qlevel_hwm[8]; /* Only for P/Q/R/S */ + u64 qlevel[8]; /* Only for P/Q/R/S */ +}; + +struct sja1105_port_status { + struct sja1105_port_status_mac mac; + struct sja1105_port_status_hl1 hl1; + struct sja1105_port_status_hl2 hl2; +}; + +static void +sja1105_port_status_mac_unpack(void *buf, + struct sja1105_port_status_mac *status) +{ + /* Make pointer arithmetic work on 4 bytes */ + u32 *p = buf; + + sja1105_unpack(p + 0x0, &status->n_runt, 31, 24, 4); + sja1105_unpack(p + 0x0, &status->n_soferr, 23, 16, 4); + sja1105_unpack(p + 0x0, &status->n_alignerr, 15, 8, 4); + sja1105_unpack(p + 0x0, &status->n_miierr, 7, 0, 4); + sja1105_unpack(p + 0x1, &status->typeerr, 27, 27, 4); + sja1105_unpack(p + 0x1, &status->sizeerr, 26, 26, 4); + sja1105_unpack(p + 0x1, &status->tctimeout, 25, 25, 4); + sja1105_unpack(p + 0x1, &status->priorerr, 24, 24, 4); + sja1105_unpack(p + 0x1, &status->nomaster, 23, 23, 4); + sja1105_unpack(p + 0x1, &status->memov, 22, 22, 4); + sja1105_unpack(p + 0x1, &status->memerr, 21, 21, 4); + sja1105_unpack(p + 0x1, &status->invtyp, 19, 19, 4); + sja1105_unpack(p + 0x1, &status->intcyov, 18, 18, 4); + sja1105_unpack(p + 0x1, &status->domerr, 17, 17, 4); + sja1105_unpack(p + 0x1, &status->pcfbagdrop, 16, 16, 4); + sja1105_unpack(p + 0x1, &status->spcprior, 15, 12, 4); + sja1105_unpack(p + 0x1, &status->ageprior, 11, 8, 4); + sja1105_unpack(p + 0x1, &status->portdrop, 6, 6, 4); + sja1105_unpack(p + 0x1, &status->lendrop, 5, 5, 4); + sja1105_unpack(p + 0x1, &status->bagdrop, 4, 4, 4); + sja1105_unpack(p + 0x1, &status->policeerr, 3, 3, 4); + sja1105_unpack(p + 0x1, &status->drpnona664err, 2, 2, 4); + sja1105_unpack(p + 0x1, &status->spcerr, 1, 1, 4); + sja1105_unpack(p + 0x1, &status->agedrp, 0, 0, 4); +} + +static void +sja1105_port_status_hl1_unpack(void *buf, + struct sja1105_port_status_hl1 *status) +{ + /* Make pointer arithmetic work on 4 bytes */ + u32 *p = buf; + + sja1105_unpack(p + 0xF, &status->n_n664err, 31, 0, 4); + sja1105_unpack(p + 0xE, &status->n_vlanerr, 31, 0, 4); + sja1105_unpack(p + 0xD, &status->n_unreleased, 31, 0, 4); + sja1105_unpack(p + 0xC, &status->n_sizeerr, 31, 0, 4); + sja1105_unpack(p + 0xB, &status->n_crcerr, 31, 0, 4); + sja1105_unpack(p + 0xA, &status->n_vlnotfound, 31, 0, 4); + sja1105_unpack(p + 0x9, &status->n_ctpolerr, 31, 0, 4); + sja1105_unpack(p + 0x8, &status->n_polerr, 31, 0, 4); + sja1105_unpack(p + 0x7, &status->n_rxfrmsh, 31, 0, 4); + sja1105_unpack(p + 0x6, &status->n_rxfrm, 31, 0, 4); + sja1105_unpack(p + 0x5, &status->n_rxbytesh, 31, 0, 4); + sja1105_unpack(p + 0x4, &status->n_rxbyte, 31, 0, 4); + sja1105_unpack(p + 0x3, &status->n_txfrmsh, 31, 0, 4); + sja1105_unpack(p + 0x2, &status->n_txfrm, 31, 0, 4); + sja1105_unpack(p + 0x1, &status->n_txbytesh, 31, 0, 4); + sja1105_unpack(p + 0x0, &status->n_txbyte, 31, 0, 4); + status->n_rxfrm += status->n_rxfrmsh << 32; + status->n_rxbyte += status->n_rxbytesh << 32; + status->n_txfrm += status->n_txfrmsh << 32; + status->n_txbyte += status->n_txbytesh << 32; +} + +static void +sja1105_port_status_hl2_unpack(void *buf, + struct sja1105_port_status_hl2 *status) +{ + /* Make pointer arithmetic work on 4 bytes */ + u32 *p = buf; + + sja1105_unpack(p + 0x3, &status->n_qfull, 31, 0, 4); + sja1105_unpack(p + 0x2, &status->n_part_drop, 31, 0, 4); + sja1105_unpack(p + 0x1, &status->n_egr_disabled, 31, 0, 4); + sja1105_unpack(p + 0x0, &status->n_not_reach, 31, 0, 4); +} + +static void +sja1105pqrs_port_status_qlevel_unpack(void *buf, + struct sja1105_port_status_hl2 *status) +{ + /* Make pointer arithmetic work on 4 bytes */ + u32 *p = buf; + int i; + + for (i = 0; i < 8; i++) { + sja1105_unpack(p + i, &status->qlevel_hwm[i], 24, 16, 4); + sja1105_unpack(p + i, &status->qlevel[i], 8, 0, 4); + } +} + +static int sja1105_port_status_get_mac(struct sja1105_private *priv, + struct sja1105_port_status_mac *status, + int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + u8 packed_buf[SJA1105_SIZE_MAC_AREA] = {0}; + int rc; + + /* MAC area */ + rc = sja1105_spi_send_packed_buf(priv, SPI_READ, regs->mac[port], + packed_buf, SJA1105_SIZE_MAC_AREA); + if (rc < 0) + return rc; + + sja1105_port_status_mac_unpack(packed_buf, status); + + return 0; +} + +static int sja1105_port_status_get_hl1(struct sja1105_private *priv, + struct sja1105_port_status_hl1 *status, + int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + u8 packed_buf[SJA1105_SIZE_HL1_AREA] = {0}; + int rc; + + rc = sja1105_spi_send_packed_buf(priv, SPI_READ, regs->mac_hl1[port], + packed_buf, SJA1105_SIZE_HL1_AREA); + if (rc < 0) + return rc; + + sja1105_port_status_hl1_unpack(packed_buf, status); + + return 0; +} + +static int sja1105_port_status_get_hl2(struct sja1105_private *priv, + struct sja1105_port_status_hl2 *status, + int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + u8 packed_buf[SJA1105_SIZE_QLEVEL_AREA] = {0}; + int rc; + + rc = sja1105_spi_send_packed_buf(priv, SPI_READ, regs->mac_hl2[port], + packed_buf, SJA1105_SIZE_HL2_AREA); + if (rc < 0) + return rc; + + sja1105_port_status_hl2_unpack(packed_buf, status); + + /* Code below is strictly P/Q/R/S specific. */ + if (priv->info->device_id == SJA1105E_DEVICE_ID || + priv->info->device_id == SJA1105T_DEVICE_ID) + return 0; + + rc = sja1105_spi_send_packed_buf(priv, SPI_READ, regs->qlevel[port], + packed_buf, SJA1105_SIZE_QLEVEL_AREA); + if (rc < 0) + return rc; + + sja1105pqrs_port_status_qlevel_unpack(packed_buf, status); + + return 0; +} + +static int sja1105_port_status_get(struct sja1105_private *priv, + struct sja1105_port_status *status, + int port) +{ + int rc; + + rc = sja1105_port_status_get_mac(priv, &status->mac, port); + if (rc < 0) + return rc; + rc = sja1105_port_status_get_hl1(priv, &status->hl1, port); + if (rc < 0) + return rc; + rc = sja1105_port_status_get_hl2(priv, &status->hl2, port); + if (rc < 0) + return rc; + + return 0; +} + +static char sja1105_port_stats[][ETH_GSTRING_LEN] = { + /* MAC-Level Diagnostic Counters */ + "n_runt", + "n_soferr", + "n_alignerr", + "n_miierr", + /* MAC-Level Diagnostic Flags */ + "typeerr", + "sizeerr", + "tctimeout", + "priorerr", + "nomaster", + "memov", + "memerr", + "invtyp", + "intcyov", + "domerr", + "pcfbagdrop", + "spcprior", + "ageprior", + "portdrop", + "lendrop", + "bagdrop", + "policeerr", + "drpnona664err", + "spcerr", + "agedrp", + /* High-Level Diagnostic Counters */ + "n_n664err", + "n_vlanerr", + "n_unreleased", + "n_sizeerr", + "n_crcerr", + "n_vlnotfound", + "n_ctpolerr", + "n_polerr", + "n_rxfrm", + "n_rxbyte", + "n_txfrm", + "n_txbyte", + "n_qfull", + "n_part_drop", + "n_egr_disabled", + "n_not_reach", +}; + +static char sja1105pqrs_extra_port_stats[][ETH_GSTRING_LEN] = { + /* Queue Levels */ + "qlevel_hwm_0", + "qlevel_hwm_1", + "qlevel_hwm_2", + "qlevel_hwm_3", + "qlevel_hwm_4", + "qlevel_hwm_5", + "qlevel_hwm_6", + "qlevel_hwm_7", + "qlevel_0", + "qlevel_1", + "qlevel_2", + "qlevel_3", + "qlevel_4", + "qlevel_5", + "qlevel_6", + "qlevel_7", +}; + +void sja1105_get_ethtool_stats(struct dsa_switch *ds, int port, u64 *data) +{ + struct sja1105_private *priv = ds->priv; + struct sja1105_port_status status; + int rc, i, k = 0; + + memset(&status, 0, sizeof(status)); + + rc = sja1105_port_status_get(priv, &status, port); + if (rc < 0) { + dev_err(ds->dev, "Failed to read port %d counters: %d\n", + port, rc); + return; + } + memset(data, 0, ARRAY_SIZE(sja1105_port_stats) * sizeof(u64)); + data[k++] = status.mac.n_runt; + data[k++] = status.mac.n_soferr; + data[k++] = status.mac.n_alignerr; + data[k++] = status.mac.n_miierr; + data[k++] = status.mac.typeerr; + data[k++] = status.mac.sizeerr; + data[k++] = status.mac.tctimeout; + data[k++] = status.mac.priorerr; + data[k++] = status.mac.nomaster; + data[k++] = status.mac.memov; + data[k++] = status.mac.memerr; + data[k++] = status.mac.invtyp; + data[k++] = status.mac.intcyov; + data[k++] = status.mac.domerr; + data[k++] = status.mac.pcfbagdrop; + data[k++] = status.mac.spcprior; + data[k++] = status.mac.ageprior; + data[k++] = status.mac.portdrop; + data[k++] = status.mac.lendrop; + data[k++] = status.mac.bagdrop; + data[k++] = status.mac.policeerr; + data[k++] = status.mac.drpnona664err; + data[k++] = status.mac.spcerr; + data[k++] = status.mac.agedrp; + data[k++] = status.hl1.n_n664err; + data[k++] = status.hl1.n_vlanerr; + data[k++] = status.hl1.n_unreleased; + data[k++] = status.hl1.n_sizeerr; + data[k++] = status.hl1.n_crcerr; + data[k++] = status.hl1.n_vlnotfound; + data[k++] = status.hl1.n_ctpolerr; + data[k++] = status.hl1.n_polerr; + data[k++] = status.hl1.n_rxfrm; + data[k++] = status.hl1.n_rxbyte; + data[k++] = status.hl1.n_txfrm; + data[k++] = status.hl1.n_txbyte; + data[k++] = status.hl2.n_qfull; + data[k++] = status.hl2.n_part_drop; + data[k++] = status.hl2.n_egr_disabled; + data[k++] = status.hl2.n_not_reach; + + if (priv->info->device_id == SJA1105E_DEVICE_ID || + priv->info->device_id == SJA1105T_DEVICE_ID) + return; + + memset(data + k, 0, ARRAY_SIZE(sja1105pqrs_extra_port_stats) * + sizeof(u64)); + for (i = 0; i < 8; i++) { + data[k++] = status.hl2.qlevel_hwm[i]; + data[k++] = status.hl2.qlevel[i]; + } +} + +void sja1105_get_strings(struct dsa_switch *ds, int port, + u32 stringset, u8 *data) +{ + struct sja1105_private *priv = ds->priv; + u8 *p = data; + int i; + + switch (stringset) { + case ETH_SS_STATS: + for (i = 0; i < ARRAY_SIZE(sja1105_port_stats); i++) { + strlcpy(p, sja1105_port_stats[i], ETH_GSTRING_LEN); + p += ETH_GSTRING_LEN; + } + if (priv->info->device_id == SJA1105E_DEVICE_ID || + priv->info->device_id == SJA1105T_DEVICE_ID) + return; + for (i = 0; i < ARRAY_SIZE(sja1105pqrs_extra_port_stats); i++) { + strlcpy(p, sja1105pqrs_extra_port_stats[i], + ETH_GSTRING_LEN); + p += ETH_GSTRING_LEN; + } + break; + } +} + +int sja1105_get_sset_count(struct dsa_switch *ds, int port, int sset) +{ + int count = ARRAY_SIZE(sja1105_port_stats); + struct sja1105_private *priv = ds->priv; + + if (sset != ETH_SS_STATS) + return -EOPNOTSUPP; + + if (priv->info->device_id == SJA1105PR_DEVICE_ID || + priv->info->device_id == SJA1105QS_DEVICE_ID) + count += ARRAY_SIZE(sja1105pqrs_extra_port_stats); + + return count; +} diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c new file mode 100644 index 000000000000..32bf3a7cc3b6 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -0,0 +1,2243 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2018, Sensor-Technik Wiedemann GmbH + * Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/printk.h> +#include <linux/spi/spi.h> +#include <linux/errno.h> +#include <linux/gpio/consumer.h> +#include <linux/phylink.h> +#include <linux/of.h> +#include <linux/of_net.h> +#include <linux/of_mdio.h> +#include <linux/of_device.h> +#include <linux/netdev_features.h> +#include <linux/netdevice.h> +#include <linux/if_bridge.h> +#include <linux/if_ether.h> +#include <linux/dsa/8021q.h> +#include "sja1105.h" + +static void sja1105_hw_reset(struct gpio_desc *gpio, unsigned int pulse_len, + unsigned int startup_delay) +{ + gpiod_set_value_cansleep(gpio, 1); + /* Wait for minimum reset pulse length */ + msleep(pulse_len); + gpiod_set_value_cansleep(gpio, 0); + /* Wait until chip is ready after reset */ + msleep(startup_delay); +} + +static void +sja1105_port_allow_traffic(struct sja1105_l2_forwarding_entry *l2_fwd, + int from, int to, bool allow) +{ + if (allow) { + l2_fwd[from].bc_domain |= BIT(to); + l2_fwd[from].reach_port |= BIT(to); + l2_fwd[from].fl_domain |= BIT(to); + } else { + l2_fwd[from].bc_domain &= ~BIT(to); + l2_fwd[from].reach_port &= ~BIT(to); + l2_fwd[from].fl_domain &= ~BIT(to); + } +} + +/* Structure used to temporarily transport device tree + * settings into sja1105_setup + */ +struct sja1105_dt_port { + phy_interface_t phy_mode; + sja1105_mii_role_t role; +}; + +static int sja1105_init_mac_settings(struct sja1105_private *priv) +{ + struct sja1105_mac_config_entry default_mac = { + /* Enable all 8 priority queues on egress. + * Every queue i holds top[i] - base[i] frames. + * Sum of top[i] - base[i] is 511 (max hardware limit). + */ + .top = {0x3F, 0x7F, 0xBF, 0xFF, 0x13F, 0x17F, 0x1BF, 0x1FF}, + .base = {0x0, 0x40, 0x80, 0xC0, 0x100, 0x140, 0x180, 0x1C0}, + .enabled = {true, true, true, true, true, true, true, true}, + /* Keep standard IFG of 12 bytes on egress. */ + .ifg = 0, + /* Always put the MAC speed in automatic mode, where it can be + * adjusted at runtime by PHYLINK. + */ + .speed = SJA1105_SPEED_AUTO, + /* No static correction for 1-step 1588 events */ + .tp_delin = 0, + .tp_delout = 0, + /* Disable aging for critical TTEthernet traffic */ + .maxage = 0xFF, + /* Internal VLAN (pvid) to apply to untagged ingress */ + .vlanprio = 0, + .vlanid = 1, + .ing_mirr = false, + .egr_mirr = false, + /* Don't drop traffic with other EtherType than ETH_P_IP */ + .drpnona664 = false, + /* Don't drop double-tagged traffic */ + .drpdtag = false, + /* Don't drop untagged traffic */ + .drpuntag = false, + /* Don't retag 802.1p (VID 0) traffic with the pvid */ + .retag = false, + /* Disable learning and I/O on user ports by default - + * STP will enable it. + */ + .dyn_learn = false, + .egress = false, + .ingress = false, + }; + struct sja1105_mac_config_entry *mac; + struct sja1105_table *table; + int i; + + table = &priv->static_config.tables[BLK_IDX_MAC_CONFIG]; + + /* Discard previous MAC Configuration Table */ + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + table->entries = kcalloc(SJA1105_NUM_PORTS, + table->ops->unpacked_entry_size, GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + table->entry_count = SJA1105_NUM_PORTS; + + mac = table->entries; + + for (i = 0; i < SJA1105_NUM_PORTS; i++) { + mac[i] = default_mac; + if (i == dsa_upstream_port(priv->ds, i)) { + /* STP doesn't get called for CPU port, so we need to + * set the I/O parameters statically. + */ + mac[i].dyn_learn = true; + mac[i].ingress = true; + mac[i].egress = true; + } + } + + return 0; +} + +static int sja1105_init_mii_settings(struct sja1105_private *priv, + struct sja1105_dt_port *ports) +{ + struct device *dev = &priv->spidev->dev; + struct sja1105_xmii_params_entry *mii; + struct sja1105_table *table; + int i; + + table = &priv->static_config.tables[BLK_IDX_XMII_PARAMS]; + + /* Discard previous xMII Mode Parameters Table */ + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + table->entries = kcalloc(SJA1105_MAX_XMII_PARAMS_COUNT, + table->ops->unpacked_entry_size, GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + /* Override table based on PHYLINK DT bindings */ + table->entry_count = SJA1105_MAX_XMII_PARAMS_COUNT; + + mii = table->entries; + + for (i = 0; i < SJA1105_NUM_PORTS; i++) { + switch (ports[i].phy_mode) { + case PHY_INTERFACE_MODE_MII: + mii->xmii_mode[i] = XMII_MODE_MII; + break; + case PHY_INTERFACE_MODE_RMII: + mii->xmii_mode[i] = XMII_MODE_RMII; + break; + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + mii->xmii_mode[i] = XMII_MODE_RGMII; + break; + default: + dev_err(dev, "Unsupported PHY mode %s!\n", + phy_modes(ports[i].phy_mode)); + } + + mii->phy_mac[i] = ports[i].role; + } + return 0; +} + +static int sja1105_init_static_fdb(struct sja1105_private *priv) +{ + struct sja1105_table *table; + + table = &priv->static_config.tables[BLK_IDX_L2_LOOKUP]; + + /* We only populate the FDB table through dynamic + * L2 Address Lookup entries + */ + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + return 0; +} + +static int sja1105_init_l2_lookup_params(struct sja1105_private *priv) +{ + struct sja1105_table *table; + u64 max_fdb_entries = SJA1105_MAX_L2_LOOKUP_COUNT / SJA1105_NUM_PORTS; + struct sja1105_l2_lookup_params_entry default_l2_lookup_params = { + /* Learned FDB entries are forgotten after 300 seconds */ + .maxage = SJA1105_AGEING_TIME_MS(300000), + /* All entries within a FDB bin are available for learning */ + .dyn_tbsz = SJA1105ET_FDB_BIN_SIZE, + /* And the P/Q/R/S equivalent setting: */ + .start_dynspc = 0, + .maxaddrp = {max_fdb_entries, max_fdb_entries, max_fdb_entries, + max_fdb_entries, max_fdb_entries, }, + /* 2^8 + 2^5 + 2^3 + 2^2 + 2^1 + 1 in Koopman notation */ + .poly = 0x97, + /* This selects between Independent VLAN Learning (IVL) and + * Shared VLAN Learning (SVL) + */ + .shared_learn = false, + /* Don't discard management traffic based on ENFPORT - + * we don't perform SMAC port enforcement anyway, so + * what we are setting here doesn't matter. + */ + .no_enf_hostprt = false, + /* Don't learn SMAC for mac_fltres1 and mac_fltres0. + * Maybe correlate with no_linklocal_learn from bridge driver? + */ + .no_mgmt_learn = true, + /* P/Q/R/S only */ + .use_static = true, + /* Dynamically learned FDB entries can overwrite other (older) + * dynamic FDB entries + */ + .owr_dyn = true, + .drpnolearn = true, + }; + + table = &priv->static_config.tables[BLK_IDX_L2_LOOKUP_PARAMS]; + + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + table->entries = kcalloc(SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + table->ops->unpacked_entry_size, GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + table->entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT; + + /* This table only has a single entry */ + ((struct sja1105_l2_lookup_params_entry *)table->entries)[0] = + default_l2_lookup_params; + + return 0; +} + +static int sja1105_init_static_vlan(struct sja1105_private *priv) +{ + struct sja1105_table *table; + struct sja1105_vlan_lookup_entry pvid = { + .ving_mirr = 0, + .vegr_mirr = 0, + .vmemb_port = 0, + .vlan_bc = 0, + .tag_port = 0, + .vlanid = 1, + }; + int i; + + table = &priv->static_config.tables[BLK_IDX_VLAN_LOOKUP]; + + /* The static VLAN table will only contain the initial pvid of 1. + * All other VLANs are to be configured through dynamic entries, + * and kept in the static configuration table as backing memory. + */ + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + table->entries = kcalloc(1, table->ops->unpacked_entry_size, + GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + table->entry_count = 1; + + /* VLAN 1: all DT-defined ports are members; no restrictions on + * forwarding; always transmit priority-tagged frames as untagged. + */ + for (i = 0; i < SJA1105_NUM_PORTS; i++) { + pvid.vmemb_port |= BIT(i); + pvid.vlan_bc |= BIT(i); + pvid.tag_port &= ~BIT(i); + } + + ((struct sja1105_vlan_lookup_entry *)table->entries)[0] = pvid; + return 0; +} + +static int sja1105_init_l2_forwarding(struct sja1105_private *priv) +{ + struct sja1105_l2_forwarding_entry *l2fwd; + struct sja1105_table *table; + int i, j; + + table = &priv->static_config.tables[BLK_IDX_L2_FORWARDING]; + + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + table->entries = kcalloc(SJA1105_MAX_L2_FORWARDING_COUNT, + table->ops->unpacked_entry_size, GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + table->entry_count = SJA1105_MAX_L2_FORWARDING_COUNT; + + l2fwd = table->entries; + + /* First 5 entries define the forwarding rules */ + for (i = 0; i < SJA1105_NUM_PORTS; i++) { + unsigned int upstream = dsa_upstream_port(priv->ds, i); + + for (j = 0; j < SJA1105_NUM_TC; j++) + l2fwd[i].vlan_pmap[j] = j; + + if (i == upstream) + continue; + + sja1105_port_allow_traffic(l2fwd, i, upstream, true); + sja1105_port_allow_traffic(l2fwd, upstream, i, true); + } + /* Next 8 entries define VLAN PCP mapping from ingress to egress. + * Create a one-to-one mapping. + */ + for (i = 0; i < SJA1105_NUM_TC; i++) + for (j = 0; j < SJA1105_NUM_PORTS; j++) + l2fwd[SJA1105_NUM_PORTS + i].vlan_pmap[j] = i; + + return 0; +} + +static int sja1105_init_l2_forwarding_params(struct sja1105_private *priv) +{ + struct sja1105_l2_forwarding_params_entry default_l2fwd_params = { + /* Disallow dynamic reconfiguration of vlan_pmap */ + .max_dynp = 0, + /* Use a single memory partition for all ingress queues */ + .part_spc = { SJA1105_MAX_FRAME_MEMORY, 0, 0, 0, 0, 0, 0, 0 }, + }; + struct sja1105_table *table; + + table = &priv->static_config.tables[BLK_IDX_L2_FORWARDING_PARAMS]; + + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + table->entries = kcalloc(SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT, + table->ops->unpacked_entry_size, GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + table->entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT; + + /* This table only has a single entry */ + ((struct sja1105_l2_forwarding_params_entry *)table->entries)[0] = + default_l2fwd_params; + + return 0; +} + +static int sja1105_init_general_params(struct sja1105_private *priv) +{ + struct sja1105_general_params_entry default_general_params = { + /* Disallow dynamic changing of the mirror port */ + .mirr_ptacu = 0, + .switchid = priv->ds->index, + /* Priority queue for link-local frames trapped to CPU */ + .hostprio = 7, + .mac_fltres1 = SJA1105_LINKLOCAL_FILTER_A, + .mac_flt1 = SJA1105_LINKLOCAL_FILTER_A_MASK, + .incl_srcpt1 = false, + .send_meta1 = false, + .mac_fltres0 = SJA1105_LINKLOCAL_FILTER_B, + .mac_flt0 = SJA1105_LINKLOCAL_FILTER_B_MASK, + .incl_srcpt0 = false, + .send_meta0 = false, + /* The destination for traffic matching mac_fltres1 and + * mac_fltres0 on all ports except host_port. Such traffic + * receieved on host_port itself would be dropped, except + * by installing a temporary 'management route' + */ + .host_port = dsa_upstream_port(priv->ds, 0), + /* Same as host port */ + .mirr_port = dsa_upstream_port(priv->ds, 0), + /* Link-local traffic received on casc_port will be forwarded + * to host_port without embedding the source port and device ID + * info in the destination MAC address (presumably because it + * is a cascaded port and a downstream SJA switch already did + * that). Default to an invalid port (to disable the feature) + * and overwrite this if we find any DSA (cascaded) ports. + */ + .casc_port = SJA1105_NUM_PORTS, + /* No TTEthernet */ + .vllupformat = 0, + .vlmarker = 0, + .vlmask = 0, + /* Only update correctionField for 1-step PTP (L2 transport) */ + .ignore2stf = 0, + /* Forcefully disable VLAN filtering by telling + * the switch that VLAN has a different EtherType. + */ + .tpid = ETH_P_SJA1105, + .tpid2 = ETH_P_SJA1105, + }; + struct sja1105_table *table; + int i, k = 0; + + for (i = 0; i < SJA1105_NUM_PORTS; i++) { + if (dsa_is_dsa_port(priv->ds, i)) + default_general_params.casc_port = i; + else if (dsa_is_user_port(priv->ds, i)) + priv->ports[i].mgmt_slot = k++; + } + + table = &priv->static_config.tables[BLK_IDX_GENERAL_PARAMS]; + + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + table->entries = kcalloc(SJA1105_MAX_GENERAL_PARAMS_COUNT, + table->ops->unpacked_entry_size, GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + table->entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT; + + /* This table only has a single entry */ + ((struct sja1105_general_params_entry *)table->entries)[0] = + default_general_params; + + return 0; +} + +#define SJA1105_RATE_MBPS(speed) (((speed) * 64000) / 1000) + +static inline void +sja1105_setup_policer(struct sja1105_l2_policing_entry *policing, + int index) +{ + policing[index].sharindx = index; + policing[index].smax = 65535; /* Burst size in bytes */ + policing[index].rate = SJA1105_RATE_MBPS(1000); + policing[index].maxlen = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN; + policing[index].partition = 0; +} + +static int sja1105_init_l2_policing(struct sja1105_private *priv) +{ + struct sja1105_l2_policing_entry *policing; + struct sja1105_table *table; + int i, j, k; + + table = &priv->static_config.tables[BLK_IDX_L2_POLICING]; + + /* Discard previous L2 Policing Table */ + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + table->entries = kcalloc(SJA1105_MAX_L2_POLICING_COUNT, + table->ops->unpacked_entry_size, GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + table->entry_count = SJA1105_MAX_L2_POLICING_COUNT; + + policing = table->entries; + + /* k sweeps through all unicast policers (0-39). + * bcast sweeps through policers 40-44. + */ + for (i = 0, k = 0; i < SJA1105_NUM_PORTS; i++) { + int bcast = (SJA1105_NUM_PORTS * SJA1105_NUM_TC) + i; + + for (j = 0; j < SJA1105_NUM_TC; j++, k++) + sja1105_setup_policer(policing, k); + + /* Set up this port's policer for broadcast traffic */ + sja1105_setup_policer(policing, bcast); + } + return 0; +} + +static int sja1105_init_avb_params(struct sja1105_private *priv, + bool on) +{ + struct sja1105_avb_params_entry *avb; + struct sja1105_table *table; + + table = &priv->static_config.tables[BLK_IDX_AVB_PARAMS]; + + /* Discard previous AVB Parameters Table */ + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + /* Configure the reception of meta frames only if requested */ + if (!on) + return 0; + + table->entries = kcalloc(SJA1105_MAX_AVB_PARAMS_COUNT, + table->ops->unpacked_entry_size, GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + table->entry_count = SJA1105_MAX_AVB_PARAMS_COUNT; + + avb = table->entries; + + avb->destmeta = SJA1105_META_DMAC; + avb->srcmeta = SJA1105_META_SMAC; + + return 0; +} + +static int sja1105_static_config_load(struct sja1105_private *priv, + struct sja1105_dt_port *ports) +{ + int rc; + + sja1105_static_config_free(&priv->static_config); + rc = sja1105_static_config_init(&priv->static_config, + priv->info->static_ops, + priv->info->device_id); + if (rc) + return rc; + + /* Build static configuration */ + rc = sja1105_init_mac_settings(priv); + if (rc < 0) + return rc; + rc = sja1105_init_mii_settings(priv, ports); + if (rc < 0) + return rc; + rc = sja1105_init_static_fdb(priv); + if (rc < 0) + return rc; + rc = sja1105_init_static_vlan(priv); + if (rc < 0) + return rc; + rc = sja1105_init_l2_lookup_params(priv); + if (rc < 0) + return rc; + rc = sja1105_init_l2_forwarding(priv); + if (rc < 0) + return rc; + rc = sja1105_init_l2_forwarding_params(priv); + if (rc < 0) + return rc; + rc = sja1105_init_l2_policing(priv); + if (rc < 0) + return rc; + rc = sja1105_init_general_params(priv); + if (rc < 0) + return rc; + rc = sja1105_init_avb_params(priv, false); + if (rc < 0) + return rc; + + /* Send initial configuration to hardware via SPI */ + return sja1105_static_config_upload(priv); +} + +static int sja1105_parse_rgmii_delays(struct sja1105_private *priv, + const struct sja1105_dt_port *ports) +{ + int i; + + for (i = 0; i < SJA1105_NUM_PORTS; i++) { + if (ports->role == XMII_MAC) + continue; + + if (ports->phy_mode == PHY_INTERFACE_MODE_RGMII_RXID || + ports->phy_mode == PHY_INTERFACE_MODE_RGMII_ID) + priv->rgmii_rx_delay[i] = true; + + if (ports->phy_mode == PHY_INTERFACE_MODE_RGMII_TXID || + ports->phy_mode == PHY_INTERFACE_MODE_RGMII_ID) + priv->rgmii_tx_delay[i] = true; + + if ((priv->rgmii_rx_delay[i] || priv->rgmii_tx_delay[i]) && + !priv->info->setup_rgmii_delay) + return -EINVAL; + } + return 0; +} + +static int sja1105_parse_ports_node(struct sja1105_private *priv, + struct sja1105_dt_port *ports, + struct device_node *ports_node) +{ + struct device *dev = &priv->spidev->dev; + struct device_node *child; + + for_each_child_of_node(ports_node, child) { + struct device_node *phy_node; + int phy_mode; + u32 index; + + /* Get switch port number from DT */ + if (of_property_read_u32(child, "reg", &index) < 0) { + dev_err(dev, "Port number not defined in device tree " + "(property \"reg\")\n"); + return -ENODEV; + } + + /* Get PHY mode from DT */ + phy_mode = of_get_phy_mode(child); + if (phy_mode < 0) { + dev_err(dev, "Failed to read phy-mode or " + "phy-interface-type property for port %d\n", + index); + return -ENODEV; + } + ports[index].phy_mode = phy_mode; + + phy_node = of_parse_phandle(child, "phy-handle", 0); + if (!phy_node) { + if (!of_phy_is_fixed_link(child)) { + dev_err(dev, "phy-handle or fixed-link " + "properties missing!\n"); + return -ENODEV; + } + /* phy-handle is missing, but fixed-link isn't. + * So it's a fixed link. Default to PHY role. + */ + ports[index].role = XMII_PHY; + } else { + /* phy-handle present => put port in MAC role */ + ports[index].role = XMII_MAC; + of_node_put(phy_node); + } + + /* The MAC/PHY role can be overridden with explicit bindings */ + if (of_property_read_bool(child, "sja1105,role-mac")) + ports[index].role = XMII_MAC; + else if (of_property_read_bool(child, "sja1105,role-phy")) + ports[index].role = XMII_PHY; + } + + return 0; +} + +static int sja1105_parse_dt(struct sja1105_private *priv, + struct sja1105_dt_port *ports) +{ + struct device *dev = &priv->spidev->dev; + struct device_node *switch_node = dev->of_node; + struct device_node *ports_node; + int rc; + + ports_node = of_get_child_by_name(switch_node, "ports"); + if (!ports_node) { + dev_err(dev, "Incorrect bindings: absent \"ports\" node\n"); + return -ENODEV; + } + + rc = sja1105_parse_ports_node(priv, ports, ports_node); + of_node_put(ports_node); + + return rc; +} + +/* Convert link speed from SJA1105 to ethtool encoding */ +static int sja1105_speed[] = { + [SJA1105_SPEED_AUTO] = SPEED_UNKNOWN, + [SJA1105_SPEED_10MBPS] = SPEED_10, + [SJA1105_SPEED_100MBPS] = SPEED_100, + [SJA1105_SPEED_1000MBPS] = SPEED_1000, +}; + +/* Set link speed in the MAC configuration for a specific port. */ +static int sja1105_adjust_port_config(struct sja1105_private *priv, int port, + int speed_mbps) +{ + struct sja1105_xmii_params_entry *mii; + struct sja1105_mac_config_entry *mac; + struct device *dev = priv->ds->dev; + sja1105_phy_interface_t phy_mode; + sja1105_speed_t speed; + int rc; + + /* On P/Q/R/S, one can read from the device via the MAC reconfiguration + * tables. On E/T, MAC reconfig tables are not readable, only writable. + * We have to *know* what the MAC looks like. For the sake of keeping + * the code common, we'll use the static configuration tables as a + * reasonable approximation for both E/T and P/Q/R/S. + */ + mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries; + mii = priv->static_config.tables[BLK_IDX_XMII_PARAMS].entries; + + switch (speed_mbps) { + case SPEED_UNKNOWN: + /* PHYLINK called sja1105_mac_config() to inform us about + * the state->interface, but AN has not completed and the + * speed is not yet valid. UM10944.pdf says that setting + * SJA1105_SPEED_AUTO at runtime disables the port, so that is + * ok for power consumption in case AN will never complete - + * otherwise PHYLINK should come back with a new update. + */ + speed = SJA1105_SPEED_AUTO; + break; + case SPEED_10: + speed = SJA1105_SPEED_10MBPS; + break; + case SPEED_100: + speed = SJA1105_SPEED_100MBPS; + break; + case SPEED_1000: + speed = SJA1105_SPEED_1000MBPS; + break; + default: + dev_err(dev, "Invalid speed %iMbps\n", speed_mbps); + return -EINVAL; + } + + /* Overwrite SJA1105_SPEED_AUTO from the static MAC configuration + * table, since this will be used for the clocking setup, and we no + * longer need to store it in the static config (already told hardware + * we want auto during upload phase). + */ + mac[port].speed = speed; + + /* Write to the dynamic reconfiguration tables */ + rc = sja1105_dynamic_config_write(priv, BLK_IDX_MAC_CONFIG, port, + &mac[port], true); + if (rc < 0) { + dev_err(dev, "Failed to write MAC config: %d\n", rc); + return rc; + } + + /* Reconfigure the PLLs for the RGMII interfaces (required 125 MHz at + * gigabit, 25 MHz at 100 Mbps and 2.5 MHz at 10 Mbps). For MII and + * RMII no change of the clock setup is required. Actually, changing + * the clock setup does interrupt the clock signal for a certain time + * which causes trouble for all PHYs relying on this signal. + */ + phy_mode = mii->xmii_mode[port]; + if (phy_mode != XMII_MODE_RGMII) + return 0; + + return sja1105_clocking_setup_port(priv, port); +} + +/* The SJA1105 MAC programming model is through the static config (the xMII + * Mode table cannot be dynamically reconfigured), and we have to program + * that early (earlier than PHYLINK calls us, anyway). + * So just error out in case the connected PHY attempts to change the initial + * system interface MII protocol from what is defined in the DT, at least for + * now. + */ +static bool sja1105_phy_mode_mismatch(struct sja1105_private *priv, int port, + phy_interface_t interface) +{ + struct sja1105_xmii_params_entry *mii; + sja1105_phy_interface_t phy_mode; + + mii = priv->static_config.tables[BLK_IDX_XMII_PARAMS].entries; + phy_mode = mii->xmii_mode[port]; + + switch (interface) { + case PHY_INTERFACE_MODE_MII: + return (phy_mode != XMII_MODE_MII); + case PHY_INTERFACE_MODE_RMII: + return (phy_mode != XMII_MODE_RMII); + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + return (phy_mode != XMII_MODE_RGMII); + default: + return true; + } +} + +static void sja1105_mac_config(struct dsa_switch *ds, int port, + unsigned int link_an_mode, + const struct phylink_link_state *state) +{ + struct sja1105_private *priv = ds->priv; + + if (sja1105_phy_mode_mismatch(priv, port, state->interface)) + return; + + if (link_an_mode == MLO_AN_INBAND) { + dev_err(ds->dev, "In-band AN not supported!\n"); + return; + } + + sja1105_adjust_port_config(priv, port, state->speed); +} + +static void sja1105_mac_link_down(struct dsa_switch *ds, int port, + unsigned int mode, + phy_interface_t interface) +{ + sja1105_inhibit_tx(ds->priv, BIT(port), true); +} + +static void sja1105_mac_link_up(struct dsa_switch *ds, int port, + unsigned int mode, + phy_interface_t interface, + struct phy_device *phydev) +{ + sja1105_inhibit_tx(ds->priv, BIT(port), false); +} + +static void sja1105_phylink_validate(struct dsa_switch *ds, int port, + unsigned long *supported, + struct phylink_link_state *state) +{ + /* Construct a new mask which exhaustively contains all link features + * supported by the MAC, and then apply that (logical AND) to what will + * be sent to the PHY for "marketing". + */ + __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; + struct sja1105_private *priv = ds->priv; + struct sja1105_xmii_params_entry *mii; + + mii = priv->static_config.tables[BLK_IDX_XMII_PARAMS].entries; + + /* include/linux/phylink.h says: + * When @state->interface is %PHY_INTERFACE_MODE_NA, phylink + * expects the MAC driver to return all supported link modes. + */ + if (state->interface != PHY_INTERFACE_MODE_NA && + sja1105_phy_mode_mismatch(priv, port, state->interface)) { + bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS); + return; + } + + /* The MAC does not support pause frames, and also doesn't + * support half-duplex traffic modes. + */ + phylink_set(mask, Autoneg); + phylink_set(mask, MII); + phylink_set(mask, 10baseT_Full); + phylink_set(mask, 100baseT_Full); + if (mii->xmii_mode[port] == XMII_MODE_RGMII) + phylink_set(mask, 1000baseT_Full); + + bitmap_and(supported, supported, mask, __ETHTOOL_LINK_MODE_MASK_NBITS); + bitmap_and(state->advertising, state->advertising, mask, + __ETHTOOL_LINK_MODE_MASK_NBITS); +} + +static int +sja1105_find_static_fdb_entry(struct sja1105_private *priv, int port, + const struct sja1105_l2_lookup_entry *requested) +{ + struct sja1105_l2_lookup_entry *l2_lookup; + struct sja1105_table *table; + int i; + + table = &priv->static_config.tables[BLK_IDX_L2_LOOKUP]; + l2_lookup = table->entries; + + for (i = 0; i < table->entry_count; i++) + if (l2_lookup[i].macaddr == requested->macaddr && + l2_lookup[i].vlanid == requested->vlanid && + l2_lookup[i].destports & BIT(port)) + return i; + + return -1; +} + +/* We want FDB entries added statically through the bridge command to persist + * across switch resets, which are a common thing during normal SJA1105 + * operation. So we have to back them up in the static configuration tables + * and hence apply them on next static config upload... yay! + */ +static int +sja1105_static_fdb_change(struct sja1105_private *priv, int port, + const struct sja1105_l2_lookup_entry *requested, + bool keep) +{ + struct sja1105_l2_lookup_entry *l2_lookup; + struct sja1105_table *table; + int rc, match; + + table = &priv->static_config.tables[BLK_IDX_L2_LOOKUP]; + + match = sja1105_find_static_fdb_entry(priv, port, requested); + if (match < 0) { + /* Can't delete a missing entry. */ + if (!keep) + return 0; + + /* No match => new entry */ + rc = sja1105_table_resize(table, table->entry_count + 1); + if (rc) + return rc; + + match = table->entry_count - 1; + } + + /* Assign pointer after the resize (it may be new memory) */ + l2_lookup = table->entries; + + /* We have a match. + * If the job was to add this FDB entry, it's already done (mostly + * anyway, since the port forwarding mask may have changed, case in + * which we update it). + * Otherwise we have to delete it. + */ + if (keep) { + l2_lookup[match] = *requested; + return 0; + } + + /* To remove, the strategy is to overwrite the element with + * the last one, and then reduce the array size by 1 + */ + l2_lookup[match] = l2_lookup[table->entry_count - 1]; + return sja1105_table_resize(table, table->entry_count - 1); +} + +/* First-generation switches have a 4-way set associative TCAM that + * holds the FDB entries. An FDB index spans from 0 to 1023 and is comprised of + * a "bin" (grouping of 4 entries) and a "way" (an entry within a bin). + * For the placement of a newly learnt FDB entry, the switch selects the bin + * based on a hash function, and the way within that bin incrementally. + */ +static inline int sja1105et_fdb_index(int bin, int way) +{ + return bin * SJA1105ET_FDB_BIN_SIZE + way; +} + +static int sja1105et_is_fdb_entry_in_bin(struct sja1105_private *priv, int bin, + const u8 *addr, u16 vid, + struct sja1105_l2_lookup_entry *match, + int *last_unused) +{ + int way; + + for (way = 0; way < SJA1105ET_FDB_BIN_SIZE; way++) { + struct sja1105_l2_lookup_entry l2_lookup = {0}; + int index = sja1105et_fdb_index(bin, way); + + /* Skip unused entries, optionally marking them + * into the return value + */ + if (sja1105_dynamic_config_read(priv, BLK_IDX_L2_LOOKUP, + index, &l2_lookup)) { + if (last_unused) + *last_unused = way; + continue; + } + + if (l2_lookup.macaddr == ether_addr_to_u64(addr) && + l2_lookup.vlanid == vid) { + if (match) + *match = l2_lookup; + return way; + } + } + /* Return an invalid entry index if not found */ + return -1; +} + +int sja1105et_fdb_add(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid) +{ + struct sja1105_l2_lookup_entry l2_lookup = {0}; + struct sja1105_private *priv = ds->priv; + struct device *dev = ds->dev; + int last_unused = -1; + int bin, way, rc; + + bin = sja1105et_fdb_hash(priv, addr, vid); + + way = sja1105et_is_fdb_entry_in_bin(priv, bin, addr, vid, + &l2_lookup, &last_unused); + if (way >= 0) { + /* We have an FDB entry. Is our port in the destination + * mask? If yes, we need to do nothing. If not, we need + * to rewrite the entry by adding this port to it. + */ + if (l2_lookup.destports & BIT(port)) + return 0; + l2_lookup.destports |= BIT(port); + } else { + int index = sja1105et_fdb_index(bin, way); + + /* We don't have an FDB entry. We construct a new one and + * try to find a place for it within the FDB table. + */ + l2_lookup.macaddr = ether_addr_to_u64(addr); + l2_lookup.destports = BIT(port); + l2_lookup.vlanid = vid; + + if (last_unused >= 0) { + way = last_unused; + } else { + /* Bin is full, need to evict somebody. + * Choose victim at random. If you get these messages + * often, you may need to consider changing the + * distribution function: + * static_config[BLK_IDX_L2_LOOKUP_PARAMS].entries->poly + */ + get_random_bytes(&way, sizeof(u8)); + way %= SJA1105ET_FDB_BIN_SIZE; + dev_warn(dev, "Warning, FDB bin %d full while adding entry for %pM. Evicting entry %u.\n", + bin, addr, way); + /* Evict entry */ + sja1105_dynamic_config_write(priv, BLK_IDX_L2_LOOKUP, + index, NULL, false); + } + } + l2_lookup.index = sja1105et_fdb_index(bin, way); + + rc = sja1105_dynamic_config_write(priv, BLK_IDX_L2_LOOKUP, + l2_lookup.index, &l2_lookup, + true); + if (rc < 0) + return rc; + + return sja1105_static_fdb_change(priv, port, &l2_lookup, true); +} + +int sja1105et_fdb_del(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid) +{ + struct sja1105_l2_lookup_entry l2_lookup = {0}; + struct sja1105_private *priv = ds->priv; + int index, bin, way, rc; + bool keep; + + bin = sja1105et_fdb_hash(priv, addr, vid); + way = sja1105et_is_fdb_entry_in_bin(priv, bin, addr, vid, + &l2_lookup, NULL); + if (way < 0) + return 0; + index = sja1105et_fdb_index(bin, way); + + /* We have an FDB entry. Is our port in the destination mask? If yes, + * we need to remove it. If the resulting port mask becomes empty, we + * need to completely evict the FDB entry. + * Otherwise we just write it back. + */ + l2_lookup.destports &= ~BIT(port); + + if (l2_lookup.destports) + keep = true; + else + keep = false; + + rc = sja1105_dynamic_config_write(priv, BLK_IDX_L2_LOOKUP, + index, &l2_lookup, keep); + if (rc < 0) + return rc; + + return sja1105_static_fdb_change(priv, port, &l2_lookup, keep); +} + +int sja1105pqrs_fdb_add(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid) +{ + struct sja1105_l2_lookup_entry l2_lookup = {0}; + struct sja1105_private *priv = ds->priv; + int rc, i; + + /* Search for an existing entry in the FDB table */ + l2_lookup.macaddr = ether_addr_to_u64(addr); + l2_lookup.vlanid = vid; + l2_lookup.iotag = SJA1105_S_TAG; + l2_lookup.mask_macaddr = GENMASK_ULL(ETH_ALEN * 8 - 1, 0); + l2_lookup.mask_vlanid = VLAN_VID_MASK; + l2_lookup.mask_iotag = BIT(0); + l2_lookup.destports = BIT(port); + + rc = sja1105_dynamic_config_read(priv, BLK_IDX_L2_LOOKUP, + SJA1105_SEARCH, &l2_lookup); + if (rc == 0) { + /* Found and this port is already in the entry's + * port mask => job done + */ + if (l2_lookup.destports & BIT(port)) + return 0; + /* l2_lookup.index is populated by the switch in case it + * found something. + */ + l2_lookup.destports |= BIT(port); + goto skip_finding_an_index; + } + + /* Not found, so try to find an unused spot in the FDB. + * This is slightly inefficient because the strategy is knock-knock at + * every possible position from 0 to 1023. + */ + for (i = 0; i < SJA1105_MAX_L2_LOOKUP_COUNT; i++) { + rc = sja1105_dynamic_config_read(priv, BLK_IDX_L2_LOOKUP, + i, NULL); + if (rc < 0) + break; + } + if (i == SJA1105_MAX_L2_LOOKUP_COUNT) { + dev_err(ds->dev, "FDB is full, cannot add entry.\n"); + return -EINVAL; + } + l2_lookup.lockeds = true; + l2_lookup.index = i; + +skip_finding_an_index: + rc = sja1105_dynamic_config_write(priv, BLK_IDX_L2_LOOKUP, + l2_lookup.index, &l2_lookup, + true); + if (rc < 0) + return rc; + + return sja1105_static_fdb_change(priv, port, &l2_lookup, true); +} + +int sja1105pqrs_fdb_del(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid) +{ + struct sja1105_l2_lookup_entry l2_lookup = {0}; + struct sja1105_private *priv = ds->priv; + bool keep; + int rc; + + l2_lookup.macaddr = ether_addr_to_u64(addr); + l2_lookup.vlanid = vid; + l2_lookup.iotag = SJA1105_S_TAG; + l2_lookup.mask_macaddr = GENMASK_ULL(ETH_ALEN * 8 - 1, 0); + l2_lookup.mask_vlanid = VLAN_VID_MASK; + l2_lookup.mask_iotag = BIT(0); + l2_lookup.destports = BIT(port); + + rc = sja1105_dynamic_config_read(priv, BLK_IDX_L2_LOOKUP, + SJA1105_SEARCH, &l2_lookup); + if (rc < 0) + return 0; + + l2_lookup.destports &= ~BIT(port); + + /* Decide whether we remove just this port from the FDB entry, + * or if we remove it completely. + */ + if (l2_lookup.destports) + keep = true; + else + keep = false; + + rc = sja1105_dynamic_config_write(priv, BLK_IDX_L2_LOOKUP, + l2_lookup.index, &l2_lookup, keep); + if (rc < 0) + return rc; + + return sja1105_static_fdb_change(priv, port, &l2_lookup, keep); +} + +static int sja1105_fdb_add(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid) +{ + struct sja1105_private *priv = ds->priv; + u16 rx_vid, tx_vid; + int rc, i; + + if (dsa_port_is_vlan_filtering(&ds->ports[port])) + return priv->info->fdb_add_cmd(ds, port, addr, vid); + + /* Since we make use of VLANs even when the bridge core doesn't tell us + * to, translate these FDB entries into the correct dsa_8021q ones. + * The basic idea (also repeats for removal below) is: + * - Each of the other front-panel ports needs to be able to forward a + * pvid-tagged (aka tagged with their rx_vid) frame that matches this + * DMAC. + * - The CPU port (aka the tx_vid of this port) needs to be able to + * send a frame matching this DMAC to the specified port. + * For a better picture see net/dsa/tag_8021q.c. + */ + for (i = 0; i < SJA1105_NUM_PORTS; i++) { + if (i == port) + continue; + if (i == dsa_upstream_port(priv->ds, port)) + continue; + + rx_vid = dsa_8021q_rx_vid(ds, i); + rc = priv->info->fdb_add_cmd(ds, port, addr, rx_vid); + if (rc < 0) + return rc; + } + tx_vid = dsa_8021q_tx_vid(ds, port); + return priv->info->fdb_add_cmd(ds, port, addr, tx_vid); +} + +static int sja1105_fdb_del(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid) +{ + struct sja1105_private *priv = ds->priv; + u16 rx_vid, tx_vid; + int rc, i; + + if (dsa_port_is_vlan_filtering(&ds->ports[port])) + return priv->info->fdb_del_cmd(ds, port, addr, vid); + + for (i = 0; i < SJA1105_NUM_PORTS; i++) { + if (i == port) + continue; + if (i == dsa_upstream_port(priv->ds, port)) + continue; + + rx_vid = dsa_8021q_rx_vid(ds, i); + rc = priv->info->fdb_del_cmd(ds, port, addr, rx_vid); + if (rc < 0) + return rc; + } + tx_vid = dsa_8021q_tx_vid(ds, port); + return priv->info->fdb_del_cmd(ds, port, addr, tx_vid); +} + +static int sja1105_fdb_dump(struct dsa_switch *ds, int port, + dsa_fdb_dump_cb_t *cb, void *data) +{ + struct sja1105_private *priv = ds->priv; + struct device *dev = ds->dev; + u16 rx_vid, tx_vid; + int i; + + rx_vid = dsa_8021q_rx_vid(ds, port); + tx_vid = dsa_8021q_tx_vid(ds, port); + + for (i = 0; i < SJA1105_MAX_L2_LOOKUP_COUNT; i++) { + struct sja1105_l2_lookup_entry l2_lookup = {0}; + u8 macaddr[ETH_ALEN]; + int rc; + + rc = sja1105_dynamic_config_read(priv, BLK_IDX_L2_LOOKUP, + i, &l2_lookup); + /* No fdb entry at i, not an issue */ + if (rc == -ENOENT) + continue; + if (rc) { + dev_err(dev, "Failed to dump FDB: %d\n", rc); + return rc; + } + + /* FDB dump callback is per port. This means we have to + * disregard a valid entry if it's not for this port, even if + * only to revisit it later. This is inefficient because the + * 1024-sized FDB table needs to be traversed 4 times through + * SPI during a 'bridge fdb show' command. + */ + if (!(l2_lookup.destports & BIT(port))) + continue; + u64_to_ether_addr(l2_lookup.macaddr, macaddr); + + /* On SJA1105 E/T, the switch doesn't implement the LOCKEDS + * bit, so it doesn't tell us whether a FDB entry is static + * or not. + * But, of course, we can find out - we're the ones who added + * it in the first place. + */ + if (priv->info->device_id == SJA1105E_DEVICE_ID || + priv->info->device_id == SJA1105T_DEVICE_ID) { + int match; + + match = sja1105_find_static_fdb_entry(priv, port, + &l2_lookup); + l2_lookup.lockeds = (match >= 0); + } + + /* We need to hide the dsa_8021q VLANs from the user. This + * basically means hiding the duplicates and only showing + * the pvid that is supposed to be active in standalone and + * non-vlan_filtering modes (aka 1). + * - For statically added FDB entries (bridge fdb add), we + * can convert the TX VID (coming from the CPU port) into the + * pvid and ignore the RX VIDs of the other ports. + * - For dynamically learned FDB entries, a single entry with + * no duplicates is learned - that which has the real port's + * pvid, aka RX VID. + */ + if (!dsa_port_is_vlan_filtering(&ds->ports[port])) { + if (l2_lookup.vlanid == tx_vid || + l2_lookup.vlanid == rx_vid) + l2_lookup.vlanid = 1; + else + continue; + } + cb(macaddr, l2_lookup.vlanid, l2_lookup.lockeds, data); + } + return 0; +} + +/* This callback needs to be present */ +static int sja1105_mdb_prepare(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_mdb *mdb) +{ + return 0; +} + +static void sja1105_mdb_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_mdb *mdb) +{ + sja1105_fdb_add(ds, port, mdb->addr, mdb->vid); +} + +static int sja1105_mdb_del(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_mdb *mdb) +{ + return sja1105_fdb_del(ds, port, mdb->addr, mdb->vid); +} + +static int sja1105_bridge_member(struct dsa_switch *ds, int port, + struct net_device *br, bool member) +{ + struct sja1105_l2_forwarding_entry *l2_fwd; + struct sja1105_private *priv = ds->priv; + int i, rc; + + l2_fwd = priv->static_config.tables[BLK_IDX_L2_FORWARDING].entries; + + for (i = 0; i < SJA1105_NUM_PORTS; i++) { + /* Add this port to the forwarding matrix of the + * other ports in the same bridge, and viceversa. + */ + if (!dsa_is_user_port(ds, i)) + continue; + /* For the ports already under the bridge, only one thing needs + * to be done, and that is to add this port to their + * reachability domain. So we can perform the SPI write for + * them immediately. However, for this port itself (the one + * that is new to the bridge), we need to add all other ports + * to its reachability domain. So we do that incrementally in + * this loop, and perform the SPI write only at the end, once + * the domain contains all other bridge ports. + */ + if (i == port) + continue; + if (dsa_to_port(ds, i)->bridge_dev != br) + continue; + sja1105_port_allow_traffic(l2_fwd, i, port, member); + sja1105_port_allow_traffic(l2_fwd, port, i, member); + + rc = sja1105_dynamic_config_write(priv, BLK_IDX_L2_FORWARDING, + i, &l2_fwd[i], true); + if (rc < 0) + return rc; + } + + return sja1105_dynamic_config_write(priv, BLK_IDX_L2_FORWARDING, + port, &l2_fwd[port], true); +} + +static void sja1105_bridge_stp_state_set(struct dsa_switch *ds, int port, + u8 state) +{ + struct sja1105_private *priv = ds->priv; + struct sja1105_mac_config_entry *mac; + + mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries; + + switch (state) { + case BR_STATE_DISABLED: + case BR_STATE_BLOCKING: + /* From UM10944 description of DRPDTAG (why put this there?): + * "Management traffic flows to the port regardless of the state + * of the INGRESS flag". So BPDUs are still be allowed to pass. + * At the moment no difference between DISABLED and BLOCKING. + */ + mac[port].ingress = false; + mac[port].egress = false; + mac[port].dyn_learn = false; + break; + case BR_STATE_LISTENING: + mac[port].ingress = true; + mac[port].egress = false; + mac[port].dyn_learn = false; + break; + case BR_STATE_LEARNING: + mac[port].ingress = true; + mac[port].egress = false; + mac[port].dyn_learn = true; + break; + case BR_STATE_FORWARDING: + mac[port].ingress = true; + mac[port].egress = true; + mac[port].dyn_learn = true; + break; + default: + dev_err(ds->dev, "invalid STP state: %d\n", state); + return; + } + + sja1105_dynamic_config_write(priv, BLK_IDX_MAC_CONFIG, port, + &mac[port], true); +} + +static int sja1105_bridge_join(struct dsa_switch *ds, int port, + struct net_device *br) +{ + return sja1105_bridge_member(ds, port, br, true); +} + +static void sja1105_bridge_leave(struct dsa_switch *ds, int port, + struct net_device *br) +{ + sja1105_bridge_member(ds, port, br, false); +} + +/* For situations where we need to change a setting at runtime that is only + * available through the static configuration, resetting the switch in order + * to upload the new static config is unavoidable. Back up the settings we + * modify at runtime (currently only MAC) and restore them after uploading, + * such that this operation is relatively seamless. + */ +static int sja1105_static_config_reload(struct sja1105_private *priv) +{ + struct sja1105_mac_config_entry *mac; + int speed_mbps[SJA1105_NUM_PORTS]; + int rc, i; + + mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries; + + /* Back up the dynamic link speed changed by sja1105_adjust_port_config + * in order to temporarily restore it to SJA1105_SPEED_AUTO - which the + * switch wants to see in the static config in order to allow us to + * change it through the dynamic interface later. + */ + for (i = 0; i < SJA1105_NUM_PORTS; i++) { + speed_mbps[i] = sja1105_speed[mac[i].speed]; + mac[i].speed = SJA1105_SPEED_AUTO; + } + + /* Reset switch and send updated static configuration */ + rc = sja1105_static_config_upload(priv); + if (rc < 0) + goto out; + + /* Configure the CGU (PLLs) for MII and RMII PHYs. + * For these interfaces there is no dynamic configuration + * needed, since PLLs have same settings at all speeds. + */ + rc = sja1105_clocking_setup(priv); + if (rc < 0) + goto out; + + for (i = 0; i < SJA1105_NUM_PORTS; i++) { + rc = sja1105_adjust_port_config(priv, i, speed_mbps[i]); + if (rc < 0) + goto out; + } +out: + return rc; +} + +static int sja1105_pvid_apply(struct sja1105_private *priv, int port, u16 pvid) +{ + struct sja1105_mac_config_entry *mac; + + mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries; + + mac[port].vlanid = pvid; + + return sja1105_dynamic_config_write(priv, BLK_IDX_MAC_CONFIG, port, + &mac[port], true); +} + +static int sja1105_is_vlan_configured(struct sja1105_private *priv, u16 vid) +{ + struct sja1105_vlan_lookup_entry *vlan; + int count, i; + + vlan = priv->static_config.tables[BLK_IDX_VLAN_LOOKUP].entries; + count = priv->static_config.tables[BLK_IDX_VLAN_LOOKUP].entry_count; + + for (i = 0; i < count; i++) + if (vlan[i].vlanid == vid) + return i; + + /* Return an invalid entry index if not found */ + return -1; +} + +static int sja1105_vlan_apply(struct sja1105_private *priv, int port, u16 vid, + bool enabled, bool untagged) +{ + struct sja1105_vlan_lookup_entry *vlan; + struct sja1105_table *table; + bool keep = true; + int match, rc; + + table = &priv->static_config.tables[BLK_IDX_VLAN_LOOKUP]; + + match = sja1105_is_vlan_configured(priv, vid); + if (match < 0) { + /* Can't delete a missing entry. */ + if (!enabled) + return 0; + rc = sja1105_table_resize(table, table->entry_count + 1); + if (rc) + return rc; + match = table->entry_count - 1; + } + /* Assign pointer after the resize (it's new memory) */ + vlan = table->entries; + vlan[match].vlanid = vid; + if (enabled) { + vlan[match].vlan_bc |= BIT(port); + vlan[match].vmemb_port |= BIT(port); + } else { + vlan[match].vlan_bc &= ~BIT(port); + vlan[match].vmemb_port &= ~BIT(port); + } + /* Also unset tag_port if removing this VLAN was requested, + * just so we don't have a confusing bitmap (no practical purpose). + */ + if (untagged || !enabled) + vlan[match].tag_port &= ~BIT(port); + else + vlan[match].tag_port |= BIT(port); + /* If there's no port left as member of this VLAN, + * it's time for it to go. + */ + if (!vlan[match].vmemb_port) + keep = false; + + dev_dbg(priv->ds->dev, + "%s: port %d, vid %llu, broadcast domain 0x%llx, " + "port members 0x%llx, tagged ports 0x%llx, keep %d\n", + __func__, port, vlan[match].vlanid, vlan[match].vlan_bc, + vlan[match].vmemb_port, vlan[match].tag_port, keep); + + rc = sja1105_dynamic_config_write(priv, BLK_IDX_VLAN_LOOKUP, vid, + &vlan[match], keep); + if (rc < 0) + return rc; + + if (!keep) + return sja1105_table_delete_entry(table, match); + + return 0; +} + +static int sja1105_setup_8021q_tagging(struct dsa_switch *ds, bool enabled) +{ + int rc, i; + + for (i = 0; i < SJA1105_NUM_PORTS; i++) { + rc = dsa_port_setup_8021q_tagging(ds, i, enabled); + if (rc < 0) { + dev_err(ds->dev, "Failed to setup VLAN tagging for port %d: %d\n", + i, rc); + return rc; + } + } + dev_info(ds->dev, "%s switch tagging\n", + enabled ? "Enabled" : "Disabled"); + return 0; +} + +static enum dsa_tag_protocol +sja1105_get_tag_protocol(struct dsa_switch *ds, int port) +{ + return DSA_TAG_PROTO_SJA1105; +} + +/* This callback needs to be present */ +static int sja1105_vlan_prepare(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + return 0; +} + +/* The TPID setting belongs to the General Parameters table, + * which can only be partially reconfigured at runtime (and not the TPID). + * So a switch reset is required. + */ +static int sja1105_vlan_filtering(struct dsa_switch *ds, int port, bool enabled) +{ + struct sja1105_general_params_entry *general_params; + struct sja1105_private *priv = ds->priv; + struct sja1105_table *table; + u16 tpid, tpid2; + int rc; + + if (enabled) { + /* Enable VLAN filtering. */ + tpid = ETH_P_8021AD; + tpid2 = ETH_P_8021Q; + } else { + /* Disable VLAN filtering. */ + tpid = ETH_P_SJA1105; + tpid2 = ETH_P_SJA1105; + } + + table = &priv->static_config.tables[BLK_IDX_GENERAL_PARAMS]; + general_params = table->entries; + /* EtherType used to identify outer tagged (S-tag) VLAN traffic */ + general_params->tpid = tpid; + /* EtherType used to identify inner tagged (C-tag) VLAN traffic */ + general_params->tpid2 = tpid2; + /* When VLAN filtering is on, we need to at least be able to + * decode management traffic through the "backup plan". + */ + general_params->incl_srcpt1 = enabled; + general_params->incl_srcpt0 = enabled; + + rc = sja1105_static_config_reload(priv); + if (rc) + dev_err(ds->dev, "Failed to change VLAN Ethertype\n"); + + /* Switch port identification based on 802.1Q is only passable + * if we are not under a vlan_filtering bridge. So make sure + * the two configurations are mutually exclusive. + */ + return sja1105_setup_8021q_tagging(ds, !enabled); +} + +static void sja1105_vlan_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + struct sja1105_private *priv = ds->priv; + u16 vid; + int rc; + + for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) { + rc = sja1105_vlan_apply(priv, port, vid, true, vlan->flags & + BRIDGE_VLAN_INFO_UNTAGGED); + if (rc < 0) { + dev_err(ds->dev, "Failed to add VLAN %d to port %d: %d\n", + vid, port, rc); + return; + } + if (vlan->flags & BRIDGE_VLAN_INFO_PVID) { + rc = sja1105_pvid_apply(ds->priv, port, vid); + if (rc < 0) { + dev_err(ds->dev, "Failed to set pvid %d on port %d: %d\n", + vid, port, rc); + return; + } + } + } +} + +static int sja1105_vlan_del(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + struct sja1105_private *priv = ds->priv; + u16 vid; + int rc; + + for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) { + rc = sja1105_vlan_apply(priv, port, vid, false, vlan->flags & + BRIDGE_VLAN_INFO_UNTAGGED); + if (rc < 0) { + dev_err(ds->dev, "Failed to remove VLAN %d from port %d: %d\n", + vid, port, rc); + return rc; + } + } + return 0; +} + +/* The programming model for the SJA1105 switch is "all-at-once" via static + * configuration tables. Some of these can be dynamically modified at runtime, + * but not the xMII mode parameters table. + * Furthermode, some PHYs may not have crystals for generating their clocks + * (e.g. RMII). Instead, their 50MHz clock is supplied via the SJA1105 port's + * ref_clk pin. So port clocking needs to be initialized early, before + * connecting to PHYs is attempted, otherwise they won't respond through MDIO. + * Setting correct PHY link speed does not matter now. + * But dsa_slave_phy_setup is called later than sja1105_setup, so the PHY + * bindings are not yet parsed by DSA core. We need to parse early so that we + * can populate the xMII mode parameters table. + */ +static int sja1105_setup(struct dsa_switch *ds) +{ + struct sja1105_dt_port ports[SJA1105_NUM_PORTS]; + struct sja1105_private *priv = ds->priv; + int rc; + + rc = sja1105_parse_dt(priv, ports); + if (rc < 0) { + dev_err(ds->dev, "Failed to parse DT: %d\n", rc); + return rc; + } + + /* Error out early if internal delays are required through DT + * and we can't apply them. + */ + rc = sja1105_parse_rgmii_delays(priv, ports); + if (rc < 0) { + dev_err(ds->dev, "RGMII delay not supported\n"); + return rc; + } + + rc = sja1105_ptp_clock_register(priv); + if (rc < 0) { + dev_err(ds->dev, "Failed to register PTP clock: %d\n", rc); + return rc; + } + /* Create and send configuration down to device */ + rc = sja1105_static_config_load(priv, ports); + if (rc < 0) { + dev_err(ds->dev, "Failed to load static config: %d\n", rc); + return rc; + } + /* Configure the CGU (PHY link modes and speeds) */ + rc = sja1105_clocking_setup(priv); + if (rc < 0) { + dev_err(ds->dev, "Failed to configure MII clocking: %d\n", rc); + return rc; + } + /* On SJA1105, VLAN filtering per se is always enabled in hardware. + * The only thing we can do to disable it is lie about what the 802.1Q + * EtherType is. + * So it will still try to apply VLAN filtering, but all ingress + * traffic (except frames received with EtherType of ETH_P_SJA1105) + * will be internally tagged with a distorted VLAN header where the + * TPID is ETH_P_SJA1105, and the VLAN ID is the port pvid. + */ + ds->vlan_filtering_is_global = true; + + /* The DSA/switchdev model brings up switch ports in standalone mode by + * default, and that means vlan_filtering is 0 since they're not under + * a bridge, so it's safe to set up switch tagging at this time. + */ + return sja1105_setup_8021q_tagging(ds, true); +} + +static void sja1105_teardown(struct dsa_switch *ds) +{ + struct sja1105_private *priv = ds->priv; + + cancel_work_sync(&priv->tagger_data.rxtstamp_work); + skb_queue_purge(&priv->tagger_data.skb_rxtstamp_queue); +} + +static int sja1105_mgmt_xmit(struct dsa_switch *ds, int port, int slot, + struct sk_buff *skb, bool takets) +{ + struct sja1105_mgmt_entry mgmt_route = {0}; + struct sja1105_private *priv = ds->priv; + struct ethhdr *hdr; + int timeout = 10; + int rc; + + hdr = eth_hdr(skb); + + mgmt_route.macaddr = ether_addr_to_u64(hdr->h_dest); + mgmt_route.destports = BIT(port); + mgmt_route.enfport = 1; + mgmt_route.tsreg = 0; + mgmt_route.takets = takets; + + rc = sja1105_dynamic_config_write(priv, BLK_IDX_MGMT_ROUTE, + slot, &mgmt_route, true); + if (rc < 0) { + kfree_skb(skb); + return rc; + } + + /* Transfer skb to the host port. */ + dsa_enqueue_skb(skb, ds->ports[port].slave); + + /* Wait until the switch has processed the frame */ + do { + rc = sja1105_dynamic_config_read(priv, BLK_IDX_MGMT_ROUTE, + slot, &mgmt_route); + if (rc < 0) { + dev_err_ratelimited(priv->ds->dev, + "failed to poll for mgmt route\n"); + continue; + } + + /* UM10944: The ENFPORT flag of the respective entry is + * cleared when a match is found. The host can use this + * flag as an acknowledgment. + */ + cpu_relax(); + } while (mgmt_route.enfport && --timeout); + + if (!timeout) { + /* Clean up the management route so that a follow-up + * frame may not match on it by mistake. + * This is only hardware supported on P/Q/R/S - on E/T it is + * a no-op and we are silently discarding the -EOPNOTSUPP. + */ + sja1105_dynamic_config_write(priv, BLK_IDX_MGMT_ROUTE, + slot, &mgmt_route, false); + dev_err_ratelimited(priv->ds->dev, "xmit timed out\n"); + } + + return NETDEV_TX_OK; +} + +/* Deferred work is unfortunately necessary because setting up the management + * route cannot be done from atomit context (SPI transfer takes a sleepable + * lock on the bus) + */ +static netdev_tx_t sja1105_port_deferred_xmit(struct dsa_switch *ds, int port, + struct sk_buff *skb) +{ + struct sja1105_private *priv = ds->priv; + struct sja1105_port *sp = &priv->ports[port]; + struct skb_shared_hwtstamps shwt = {0}; + int slot = sp->mgmt_slot; + struct sk_buff *clone; + u64 now, ts; + int rc; + + /* The tragic fact about the switch having 4x2 slots for installing + * management routes is that all of them except one are actually + * useless. + * If 2 slots are simultaneously configured for two BPDUs sent to the + * same (multicast) DMAC but on different egress ports, the switch + * would confuse them and redirect first frame it receives on the CPU + * port towards the port configured on the numerically first slot + * (therefore wrong port), then second received frame on second slot + * (also wrong port). + * So for all practical purposes, there needs to be a lock that + * prevents that from happening. The slot used here is utterly useless + * (could have simply been 0 just as fine), but we are doing it + * nonetheless, in case a smarter idea ever comes up in the future. + */ + mutex_lock(&priv->mgmt_lock); + + /* The clone, if there, was made by dsa_skb_tx_timestamp */ + clone = DSA_SKB_CB(skb)->clone; + + sja1105_mgmt_xmit(ds, port, slot, skb, !!clone); + + if (!clone) + goto out; + + skb_shinfo(clone)->tx_flags |= SKBTX_IN_PROGRESS; + + mutex_lock(&priv->ptp_lock); + + now = priv->tstamp_cc.read(&priv->tstamp_cc); + + rc = sja1105_ptpegr_ts_poll(priv, slot, &ts); + if (rc < 0) { + dev_err(ds->dev, "xmit: timed out polling for tstamp\n"); + kfree_skb(clone); + goto out_unlock_ptp; + } + + ts = sja1105_tstamp_reconstruct(priv, now, ts); + ts = timecounter_cyc2time(&priv->tstamp_tc, ts); + + shwt.hwtstamp = ns_to_ktime(ts); + skb_complete_tx_timestamp(clone, &shwt); + +out_unlock_ptp: + mutex_unlock(&priv->ptp_lock); +out: + mutex_unlock(&priv->mgmt_lock); + return NETDEV_TX_OK; +} + +/* The MAXAGE setting belongs to the L2 Forwarding Parameters table, + * which cannot be reconfigured at runtime. So a switch reset is required. + */ +static int sja1105_set_ageing_time(struct dsa_switch *ds, + unsigned int ageing_time) +{ + struct sja1105_l2_lookup_params_entry *l2_lookup_params; + struct sja1105_private *priv = ds->priv; + struct sja1105_table *table; + unsigned int maxage; + + table = &priv->static_config.tables[BLK_IDX_L2_LOOKUP_PARAMS]; + l2_lookup_params = table->entries; + + maxage = SJA1105_AGEING_TIME_MS(ageing_time); + + if (l2_lookup_params->maxage == maxage) + return 0; + + l2_lookup_params->maxage = maxage; + + return sja1105_static_config_reload(priv); +} + +/* Caller must hold priv->tagger_data.meta_lock */ +static int sja1105_change_rxtstamping(struct sja1105_private *priv, + bool on) +{ + struct sja1105_general_params_entry *general_params; + struct sja1105_table *table; + int rc; + + table = &priv->static_config.tables[BLK_IDX_GENERAL_PARAMS]; + general_params = table->entries; + general_params->send_meta1 = on; + general_params->send_meta0 = on; + + rc = sja1105_init_avb_params(priv, on); + if (rc < 0) + return rc; + + /* Initialize the meta state machine to a known state */ + if (priv->tagger_data.stampable_skb) { + kfree_skb(priv->tagger_data.stampable_skb); + priv->tagger_data.stampable_skb = NULL; + } + + return sja1105_static_config_reload(priv); +} + +static int sja1105_hwtstamp_set(struct dsa_switch *ds, int port, + struct ifreq *ifr) +{ + struct sja1105_private *priv = ds->priv; + struct hwtstamp_config config; + bool rx_on; + int rc; + + if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) + return -EFAULT; + + switch (config.tx_type) { + case HWTSTAMP_TX_OFF: + priv->ports[port].hwts_tx_en = false; + break; + case HWTSTAMP_TX_ON: + priv->ports[port].hwts_tx_en = true; + break; + default: + return -ERANGE; + } + + switch (config.rx_filter) { + case HWTSTAMP_FILTER_NONE: + rx_on = false; + break; + default: + rx_on = true; + break; + } + + if (rx_on != priv->tagger_data.hwts_rx_en) { + spin_lock(&priv->tagger_data.meta_lock); + rc = sja1105_change_rxtstamping(priv, rx_on); + spin_unlock(&priv->tagger_data.meta_lock); + if (rc < 0) { + dev_err(ds->dev, + "Failed to change RX timestamping: %d\n", rc); + return -EFAULT; + } + priv->tagger_data.hwts_rx_en = rx_on; + } + + if (copy_to_user(ifr->ifr_data, &config, sizeof(config))) + return -EFAULT; + return 0; +} + +static int sja1105_hwtstamp_get(struct dsa_switch *ds, int port, + struct ifreq *ifr) +{ + struct sja1105_private *priv = ds->priv; + struct hwtstamp_config config; + + config.flags = 0; + if (priv->ports[port].hwts_tx_en) + config.tx_type = HWTSTAMP_TX_ON; + else + config.tx_type = HWTSTAMP_TX_OFF; + if (priv->tagger_data.hwts_rx_en) + config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT; + else + config.rx_filter = HWTSTAMP_FILTER_NONE; + + return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ? + -EFAULT : 0; +} + +#define to_tagger(d) \ + container_of((d), struct sja1105_tagger_data, rxtstamp_work) +#define to_sja1105(d) \ + container_of((d), struct sja1105_private, tagger_data) + +static void sja1105_rxtstamp_work(struct work_struct *work) +{ + struct sja1105_tagger_data *data = to_tagger(work); + struct sja1105_private *priv = to_sja1105(data); + struct sk_buff *skb; + u64 now; + + mutex_lock(&priv->ptp_lock); + + now = priv->tstamp_cc.read(&priv->tstamp_cc); + + while ((skb = skb_dequeue(&data->skb_rxtstamp_queue)) != NULL) { + struct skb_shared_hwtstamps *shwt = skb_hwtstamps(skb); + u64 ts; + + *shwt = (struct skb_shared_hwtstamps) {0}; + + ts = SJA1105_SKB_CB(skb)->meta_tstamp; + ts = sja1105_tstamp_reconstruct(priv, now, ts); + ts = timecounter_cyc2time(&priv->tstamp_tc, ts); + + shwt->hwtstamp = ns_to_ktime(ts); + netif_rx_ni(skb); + } + + mutex_unlock(&priv->ptp_lock); +} + +/* Called from dsa_skb_defer_rx_timestamp */ +static bool sja1105_port_rxtstamp(struct dsa_switch *ds, int port, + struct sk_buff *skb, unsigned int type) +{ + struct sja1105_private *priv = ds->priv; + struct sja1105_tagger_data *data = &priv->tagger_data; + + if (!data->hwts_rx_en) + return false; + + /* We need to read the full PTP clock to reconstruct the Rx + * timestamp. For that we need a sleepable context. + */ + skb_queue_tail(&data->skb_rxtstamp_queue, skb); + schedule_work(&data->rxtstamp_work); + return true; +} + +/* Called from dsa_skb_tx_timestamp. This callback is just to make DSA clone + * the skb and have it available in DSA_SKB_CB in the .port_deferred_xmit + * callback, where we will timestamp it synchronously. + */ +static bool sja1105_port_txtstamp(struct dsa_switch *ds, int port, + struct sk_buff *skb, unsigned int type) +{ + struct sja1105_private *priv = ds->priv; + struct sja1105_port *sp = &priv->ports[port]; + + if (!sp->hwts_tx_en) + return false; + + return true; +} + +static const struct dsa_switch_ops sja1105_switch_ops = { + .get_tag_protocol = sja1105_get_tag_protocol, + .setup = sja1105_setup, + .teardown = sja1105_teardown, + .set_ageing_time = sja1105_set_ageing_time, + .phylink_validate = sja1105_phylink_validate, + .phylink_mac_config = sja1105_mac_config, + .phylink_mac_link_up = sja1105_mac_link_up, + .phylink_mac_link_down = sja1105_mac_link_down, + .get_strings = sja1105_get_strings, + .get_ethtool_stats = sja1105_get_ethtool_stats, + .get_sset_count = sja1105_get_sset_count, + .get_ts_info = sja1105_get_ts_info, + .port_fdb_dump = sja1105_fdb_dump, + .port_fdb_add = sja1105_fdb_add, + .port_fdb_del = sja1105_fdb_del, + .port_bridge_join = sja1105_bridge_join, + .port_bridge_leave = sja1105_bridge_leave, + .port_stp_state_set = sja1105_bridge_stp_state_set, + .port_vlan_prepare = sja1105_vlan_prepare, + .port_vlan_filtering = sja1105_vlan_filtering, + .port_vlan_add = sja1105_vlan_add, + .port_vlan_del = sja1105_vlan_del, + .port_mdb_prepare = sja1105_mdb_prepare, + .port_mdb_add = sja1105_mdb_add, + .port_mdb_del = sja1105_mdb_del, + .port_deferred_xmit = sja1105_port_deferred_xmit, + .port_hwtstamp_get = sja1105_hwtstamp_get, + .port_hwtstamp_set = sja1105_hwtstamp_set, + .port_rxtstamp = sja1105_port_rxtstamp, + .port_txtstamp = sja1105_port_txtstamp, +}; + +static int sja1105_check_device_id(struct sja1105_private *priv) +{ + const struct sja1105_regs *regs = priv->info->regs; + u8 prod_id[SJA1105_SIZE_DEVICE_ID] = {0}; + struct device *dev = &priv->spidev->dev; + u64 device_id; + u64 part_no; + int rc; + + rc = sja1105_spi_send_int(priv, SPI_READ, regs->device_id, + &device_id, SJA1105_SIZE_DEVICE_ID); + if (rc < 0) + return rc; + + if (device_id != priv->info->device_id) { + dev_err(dev, "Expected device ID 0x%llx but read 0x%llx\n", + priv->info->device_id, device_id); + return -ENODEV; + } + + rc = sja1105_spi_send_packed_buf(priv, SPI_READ, regs->prod_id, + prod_id, SJA1105_SIZE_DEVICE_ID); + if (rc < 0) + return rc; + + sja1105_unpack(prod_id, &part_no, 19, 4, SJA1105_SIZE_DEVICE_ID); + + if (part_no != priv->info->part_no) { + dev_err(dev, "Expected part number 0x%llx but read 0x%llx\n", + priv->info->part_no, part_no); + return -ENODEV; + } + + return 0; +} + +static int sja1105_probe(struct spi_device *spi) +{ + struct sja1105_tagger_data *tagger_data; + struct device *dev = &spi->dev; + struct sja1105_private *priv; + struct dsa_switch *ds; + int rc, i; + + if (!dev->of_node) { + dev_err(dev, "No DTS bindings for SJA1105 driver\n"); + return -EINVAL; + } + + priv = devm_kzalloc(dev, sizeof(struct sja1105_private), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + /* Configure the optional reset pin and bring up switch */ + priv->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(priv->reset_gpio)) + dev_dbg(dev, "reset-gpios not defined, ignoring\n"); + else + sja1105_hw_reset(priv->reset_gpio, 1, 1); + + /* Populate our driver private structure (priv) based on + * the device tree node that was probed (spi) + */ + priv->spidev = spi; + spi_set_drvdata(spi, priv); + + /* Configure the SPI bus */ + spi->bits_per_word = 8; + rc = spi_setup(spi); + if (rc < 0) { + dev_err(dev, "Could not init SPI\n"); + return rc; + } + + priv->info = of_device_get_match_data(dev); + + /* Detect hardware device */ + rc = sja1105_check_device_id(priv); + if (rc < 0) { + dev_err(dev, "Device ID check failed: %d\n", rc); + return rc; + } + + dev_info(dev, "Probed switch chip: %s\n", priv->info->name); + + ds = dsa_switch_alloc(dev, SJA1105_NUM_PORTS); + if (!ds) + return -ENOMEM; + + ds->ops = &sja1105_switch_ops; + ds->priv = priv; + priv->ds = ds; + + tagger_data = &priv->tagger_data; + skb_queue_head_init(&tagger_data->skb_rxtstamp_queue); + INIT_WORK(&tagger_data->rxtstamp_work, sja1105_rxtstamp_work); + + /* Connections between dsa_port and sja1105_port */ + for (i = 0; i < SJA1105_NUM_PORTS; i++) { + struct sja1105_port *sp = &priv->ports[i]; + + ds->ports[i].priv = sp; + sp->dp = &ds->ports[i]; + sp->data = tagger_data; + } + mutex_init(&priv->mgmt_lock); + + return dsa_register_switch(priv->ds); +} + +static int sja1105_remove(struct spi_device *spi) +{ + struct sja1105_private *priv = spi_get_drvdata(spi); + + sja1105_ptp_clock_unregister(priv); + dsa_unregister_switch(priv->ds); + sja1105_static_config_free(&priv->static_config); + return 0; +} + +static const struct of_device_id sja1105_dt_ids[] = { + { .compatible = "nxp,sja1105e", .data = &sja1105e_info }, + { .compatible = "nxp,sja1105t", .data = &sja1105t_info }, + { .compatible = "nxp,sja1105p", .data = &sja1105p_info }, + { .compatible = "nxp,sja1105q", .data = &sja1105q_info }, + { .compatible = "nxp,sja1105r", .data = &sja1105r_info }, + { .compatible = "nxp,sja1105s", .data = &sja1105s_info }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, sja1105_dt_ids); + +static struct spi_driver sja1105_driver = { + .driver = { + .name = "sja1105", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(sja1105_dt_ids), + }, + .probe = sja1105_probe, + .remove = sja1105_remove, +}; + +module_spi_driver(sja1105_driver); + +MODULE_AUTHOR("Vladimir Oltean <olteanv@gmail.com>"); +MODULE_AUTHOR("Georg Waibel <georg.waibel@sensor-technik.de>"); +MODULE_DESCRIPTION("SJA1105 Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/dsa/sja1105/sja1105_ptp.c b/drivers/net/dsa/sja1105/sja1105_ptp.c new file mode 100644 index 000000000000..d19cfdf681af --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_ptp.c @@ -0,0 +1,393 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2019, Vladimir Oltean <olteanv@gmail.com> + */ +#include "sja1105.h" + +/* The adjfine API clamps ppb between [-32,768,000, 32,768,000], and + * therefore scaled_ppm between [-2,147,483,648, 2,147,483,647]. + * Set the maximum supported ppb to a round value smaller than the maximum. + * + * Percentually speaking, this is a +/- 0.032x adjustment of the + * free-running counter (0.968x to 1.032x). + */ +#define SJA1105_MAX_ADJ_PPB 32000000 +#define SJA1105_SIZE_PTP_CMD 4 + +/* Timestamps are in units of 8 ns clock ticks (equivalent to a fixed + * 125 MHz clock) so the scale factor (MULT / SHIFT) needs to be 8. + * Furthermore, wisely pick SHIFT as 28 bits, which translates + * MULT into 2^31 (0x80000000). This is the same value around which + * the hardware PTPCLKRATE is centered, so the same ppb conversion + * arithmetic can be reused. + */ +#define SJA1105_CC_SHIFT 28 +#define SJA1105_CC_MULT (8 << SJA1105_CC_SHIFT) + +/* Having 33 bits of cycle counter left until a 64-bit overflow during delta + * conversion, we multiply this by the 8 ns counter resolution and arrive at + * a comfortable 68.71 second refresh interval until the delta would cause + * an integer overflow, in absence of any other readout. + * Approximate to 1 minute. + */ +#define SJA1105_REFRESH_INTERVAL (HZ * 60) + +/* This range is actually +/- SJA1105_MAX_ADJ_PPB + * divided by 1000 (ppb -> ppm) and with a 16-bit + * "fractional" part (actually fixed point). + * | + * v + * Convert scaled_ppm from the +/- ((10^6) << 16) range + * into the +/- (1 << 31) range. + * + * This forgoes a "ppb" numeric representation (up to NSEC_PER_SEC) + * and defines the scaling factor between scaled_ppm and the actual + * frequency adjustments (both cycle counter and hardware). + * + * ptpclkrate = scaled_ppm * 2^31 / (10^6 * 2^16) + * simplifies to + * ptpclkrate = scaled_ppm * 2^9 / 5^6 + */ +#define SJA1105_CC_MULT_NUM (1 << 9) +#define SJA1105_CC_MULT_DEM 15625 + +#define ptp_to_sja1105(d) container_of((d), struct sja1105_private, ptp_caps) +#define cc_to_sja1105(d) container_of((d), struct sja1105_private, tstamp_cc) +#define dw_to_sja1105(d) container_of((d), struct sja1105_private, refresh_work) + +struct sja1105_ptp_cmd { + u64 resptp; /* reset */ +}; + +int sja1105_get_ts_info(struct dsa_switch *ds, int port, + struct ethtool_ts_info *info) +{ + struct sja1105_private *priv = ds->priv; + + /* Called during cleanup */ + if (!priv->clock) + return -ENODEV; + + info->so_timestamping = SOF_TIMESTAMPING_TX_HARDWARE | + SOF_TIMESTAMPING_RX_HARDWARE | + SOF_TIMESTAMPING_RAW_HARDWARE; + info->tx_types = (1 << HWTSTAMP_TX_OFF) | + (1 << HWTSTAMP_TX_ON); + info->rx_filters = (1 << HWTSTAMP_FILTER_NONE) | + (1 << HWTSTAMP_FILTER_PTP_V2_L2_EVENT); + info->phc_index = ptp_clock_index(priv->clock); + return 0; +} + +int sja1105et_ptp_cmd(const void *ctx, const void *data) +{ + const struct sja1105_ptp_cmd *cmd = data; + const struct sja1105_private *priv = ctx; + const struct sja1105_regs *regs = priv->info->regs; + const int size = SJA1105_SIZE_PTP_CMD; + u8 buf[SJA1105_SIZE_PTP_CMD] = {0}; + /* No need to keep this as part of the structure */ + u64 valid = 1; + + sja1105_pack(buf, &valid, 31, 31, size); + sja1105_pack(buf, &cmd->resptp, 2, 2, size); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, regs->ptp_control, + buf, SJA1105_SIZE_PTP_CMD); +} + +int sja1105pqrs_ptp_cmd(const void *ctx, const void *data) +{ + const struct sja1105_ptp_cmd *cmd = data; + const struct sja1105_private *priv = ctx; + const struct sja1105_regs *regs = priv->info->regs; + const int size = SJA1105_SIZE_PTP_CMD; + u8 buf[SJA1105_SIZE_PTP_CMD] = {0}; + /* No need to keep this as part of the structure */ + u64 valid = 1; + + sja1105_pack(buf, &valid, 31, 31, size); + sja1105_pack(buf, &cmd->resptp, 3, 3, size); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, regs->ptp_control, + buf, SJA1105_SIZE_PTP_CMD); +} + +/* The switch returns partial timestamps (24 bits for SJA1105 E/T, which wrap + * around in 0.135 seconds, and 32 bits for P/Q/R/S, wrapping around in 34.35 + * seconds). + * + * This receives the RX or TX MAC timestamps, provided by hardware as + * the lower bits of the cycle counter, sampled at the time the timestamp was + * collected. + * + * To reconstruct into a full 64-bit-wide timestamp, the cycle counter is + * read and the high-order bits are filled in. + * + * Must be called within one wraparound period of the partial timestamp since + * it was generated by the MAC. + */ +u64 sja1105_tstamp_reconstruct(struct sja1105_private *priv, u64 now, + u64 ts_partial) +{ + u64 partial_tstamp_mask = CYCLECOUNTER_MASK(priv->info->ptp_ts_bits); + u64 ts_reconstructed; + + ts_reconstructed = (now & ~partial_tstamp_mask) | ts_partial; + + /* Check lower bits of current cycle counter against the timestamp. + * If the current cycle counter is lower than the partial timestamp, + * then wraparound surely occurred and must be accounted for. + */ + if ((now & partial_tstamp_mask) <= ts_partial) + ts_reconstructed -= (partial_tstamp_mask + 1); + + return ts_reconstructed; +} + +/* Reads the SPI interface for an egress timestamp generated by the switch + * for frames sent using management routes. + * + * SJA1105 E/T layout of the 4-byte SPI payload: + * + * 31 23 15 7 0 + * | | | | | + * +-----+-----+-----+ ^ + * ^ | + * | | + * 24-bit timestamp Update bit + * + * + * SJA1105 P/Q/R/S layout of the 8-byte SPI payload: + * + * 31 23 15 7 0 63 55 47 39 32 + * | | | | | | | | | | + * ^ +-----+-----+-----+-----+ + * | ^ + * | | + * Update bit 32-bit timestamp + * + * Notice that the update bit is in the same place. + * To have common code for E/T and P/Q/R/S for reading the timestamp, + * we need to juggle with the offset and the bit indices. + */ +int sja1105_ptpegr_ts_poll(struct sja1105_private *priv, int port, u64 *ts) +{ + const struct sja1105_regs *regs = priv->info->regs; + int tstamp_bit_start, tstamp_bit_end; + int timeout = 10; + u8 packed_buf[8]; + u64 update; + int rc; + + do { + rc = sja1105_spi_send_packed_buf(priv, SPI_READ, + regs->ptpegr_ts[port], + packed_buf, + priv->info->ptpegr_ts_bytes); + if (rc < 0) + return rc; + + sja1105_unpack(packed_buf, &update, 0, 0, + priv->info->ptpegr_ts_bytes); + if (update) + break; + + usleep_range(10, 50); + } while (--timeout); + + if (!timeout) + return -ETIMEDOUT; + + /* Point the end bit to the second 32-bit word on P/Q/R/S, + * no-op on E/T. + */ + tstamp_bit_end = (priv->info->ptpegr_ts_bytes - 4) * 8; + /* Shift the 24-bit timestamp on E/T to be collected from 31:8. + * No-op on P/Q/R/S. + */ + tstamp_bit_end += 32 - priv->info->ptp_ts_bits; + tstamp_bit_start = tstamp_bit_end + priv->info->ptp_ts_bits - 1; + + *ts = 0; + + sja1105_unpack(packed_buf, ts, tstamp_bit_start, tstamp_bit_end, + priv->info->ptpegr_ts_bytes); + + return 0; +} + +int sja1105_ptp_reset(struct sja1105_private *priv) +{ + struct dsa_switch *ds = priv->ds; + struct sja1105_ptp_cmd cmd = {0}; + int rc; + + mutex_lock(&priv->ptp_lock); + + cmd.resptp = 1; + dev_dbg(ds->dev, "Resetting PTP clock\n"); + rc = priv->info->ptp_cmd(priv, &cmd); + + timecounter_init(&priv->tstamp_tc, &priv->tstamp_cc, + ktime_to_ns(ktime_get_real())); + + mutex_unlock(&priv->ptp_lock); + + return rc; +} + +static int sja1105_ptp_gettime(struct ptp_clock_info *ptp, + struct timespec64 *ts) +{ + struct sja1105_private *priv = ptp_to_sja1105(ptp); + u64 ns; + + mutex_lock(&priv->ptp_lock); + ns = timecounter_read(&priv->tstamp_tc); + mutex_unlock(&priv->ptp_lock); + + *ts = ns_to_timespec64(ns); + + return 0; +} + +static int sja1105_ptp_settime(struct ptp_clock_info *ptp, + const struct timespec64 *ts) +{ + struct sja1105_private *priv = ptp_to_sja1105(ptp); + u64 ns = timespec64_to_ns(ts); + + mutex_lock(&priv->ptp_lock); + timecounter_init(&priv->tstamp_tc, &priv->tstamp_cc, ns); + mutex_unlock(&priv->ptp_lock); + + return 0; +} + +static int sja1105_ptp_adjfine(struct ptp_clock_info *ptp, long scaled_ppm) +{ + struct sja1105_private *priv = ptp_to_sja1105(ptp); + s64 clkrate; + + clkrate = (s64)scaled_ppm * SJA1105_CC_MULT_NUM; + clkrate = div_s64(clkrate, SJA1105_CC_MULT_DEM); + + mutex_lock(&priv->ptp_lock); + + /* Force a readout to update the timer *before* changing its frequency. + * + * This way, its corrected time curve can at all times be modeled + * as a linear "A * x + B" function, where: + * + * - B are past frequency adjustments and offset shifts, all + * accumulated into the cycle_last variable. + * + * - A is the new frequency adjustments we're just about to set. + * + * Reading now makes B accumulate the correct amount of time, + * corrected at the old rate, before changing it. + * + * Hardware timestamps then become simple points on the curve and + * are approximated using the above function. This is still better + * than letting the switch take the timestamps using the hardware + * rate-corrected clock (PTPCLKVAL) - the comparison in this case would + * be that we're shifting the ruler at the same time as we're taking + * measurements with it. + * + * The disadvantage is that it's possible to receive timestamps when + * a frequency adjustment took place in the near past. + * In this case they will be approximated using the new ppb value + * instead of a compound function made of two segments (one at the old + * and the other at the new rate) - introducing some inaccuracy. + */ + timecounter_read(&priv->tstamp_tc); + + priv->tstamp_cc.mult = SJA1105_CC_MULT + clkrate; + + mutex_unlock(&priv->ptp_lock); + + return 0; +} + +static int sja1105_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta) +{ + struct sja1105_private *priv = ptp_to_sja1105(ptp); + + mutex_lock(&priv->ptp_lock); + timecounter_adjtime(&priv->tstamp_tc, delta); + mutex_unlock(&priv->ptp_lock); + + return 0; +} + +static u64 sja1105_ptptsclk_read(const struct cyclecounter *cc) +{ + struct sja1105_private *priv = cc_to_sja1105(cc); + const struct sja1105_regs *regs = priv->info->regs; + u64 ptptsclk = 0; + int rc; + + rc = sja1105_spi_send_int(priv, SPI_READ, regs->ptptsclk, + &ptptsclk, 8); + if (rc < 0) + dev_err_ratelimited(priv->ds->dev, + "failed to read ptp cycle counter: %d\n", + rc); + return ptptsclk; +} + +static void sja1105_ptp_overflow_check(struct work_struct *work) +{ + struct delayed_work *dw = to_delayed_work(work); + struct sja1105_private *priv = dw_to_sja1105(dw); + struct timespec64 ts; + + sja1105_ptp_gettime(&priv->ptp_caps, &ts); + + schedule_delayed_work(&priv->refresh_work, SJA1105_REFRESH_INTERVAL); +} + +static const struct ptp_clock_info sja1105_ptp_caps = { + .owner = THIS_MODULE, + .name = "SJA1105 PHC", + .adjfine = sja1105_ptp_adjfine, + .adjtime = sja1105_ptp_adjtime, + .gettime64 = sja1105_ptp_gettime, + .settime64 = sja1105_ptp_settime, + .max_adj = SJA1105_MAX_ADJ_PPB, +}; + +int sja1105_ptp_clock_register(struct sja1105_private *priv) +{ + struct dsa_switch *ds = priv->ds; + + /* Set up the cycle counter */ + priv->tstamp_cc = (struct cyclecounter) { + .read = sja1105_ptptsclk_read, + .mask = CYCLECOUNTER_MASK(64), + .shift = SJA1105_CC_SHIFT, + .mult = SJA1105_CC_MULT, + }; + mutex_init(&priv->ptp_lock); + INIT_DELAYED_WORK(&priv->refresh_work, sja1105_ptp_overflow_check); + + schedule_delayed_work(&priv->refresh_work, SJA1105_REFRESH_INTERVAL); + + priv->ptp_caps = sja1105_ptp_caps; + + priv->clock = ptp_clock_register(&priv->ptp_caps, ds->dev); + if (IS_ERR_OR_NULL(priv->clock)) + return PTR_ERR(priv->clock); + + return sja1105_ptp_reset(priv); +} + +void sja1105_ptp_clock_unregister(struct sja1105_private *priv) +{ + if (IS_ERR_OR_NULL(priv->clock)) + return; + + cancel_delayed_work_sync(&priv->refresh_work); + ptp_clock_unregister(priv->clock); + priv->clock = NULL; +} diff --git a/drivers/net/dsa/sja1105/sja1105_ptp.h b/drivers/net/dsa/sja1105/sja1105_ptp.h new file mode 100644 index 000000000000..af456b0a4d27 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_ptp.h @@ -0,0 +1,64 @@ +/* SPDX-License-Identifier: GPL-2.0 + * Copyright (c) 2019, Vladimir Oltean <olteanv@gmail.com> + */ +#ifndef _SJA1105_PTP_H +#define _SJA1105_PTP_H + +#if IS_ENABLED(CONFIG_NET_DSA_SJA1105_PTP) + +int sja1105_ptp_clock_register(struct sja1105_private *priv); + +void sja1105_ptp_clock_unregister(struct sja1105_private *priv); + +int sja1105_ptpegr_ts_poll(struct sja1105_private *priv, int port, u64 *ts); + +int sja1105et_ptp_cmd(const void *ctx, const void *data); + +int sja1105pqrs_ptp_cmd(const void *ctx, const void *data); + +int sja1105_get_ts_info(struct dsa_switch *ds, int port, + struct ethtool_ts_info *ts); + +u64 sja1105_tstamp_reconstruct(struct sja1105_private *priv, u64 now, + u64 ts_partial); + +int sja1105_ptp_reset(struct sja1105_private *priv); + +#else + +static inline int sja1105_ptp_clock_register(struct sja1105_private *priv) +{ + return 0; +} + +static inline void sja1105_ptp_clock_unregister(struct sja1105_private *priv) +{ + return; +} + +static inline int +sja1105_ptpegr_ts_poll(struct sja1105_private *priv, int port, u64 *ts) +{ + return 0; +} + +static inline u64 sja1105_tstamp_reconstruct(struct sja1105_private *priv, + u64 now, u64 ts_partial) +{ + return 0; +} + +static inline int sja1105_ptp_reset(struct sja1105_private *priv) +{ + return 0; +} + +#define sja1105et_ptp_cmd NULL + +#define sja1105pqrs_ptp_cmd NULL + +#define sja1105_get_ts_info NULL + +#endif /* IS_ENABLED(CONFIG_NET_DSA_SJA1105_PTP) */ + +#endif /* _SJA1105_PTP_H */ diff --git a/drivers/net/dsa/sja1105/sja1105_spi.c b/drivers/net/dsa/sja1105/sja1105_spi.c new file mode 100644 index 000000000000..84dc603138cf --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_spi.c @@ -0,0 +1,641 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* Copyright (c) 2016-2018, NXP Semiconductors + * Copyright (c) 2018, Sensor-Technik Wiedemann GmbH + * Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com> + */ +#include <linux/spi/spi.h> +#include <linux/packing.h> +#include "sja1105.h" + +#define SJA1105_SIZE_PORT_CTRL 4 +#define SJA1105_SIZE_RESET_CMD 4 +#define SJA1105_SIZE_SPI_MSG_HEADER 4 +#define SJA1105_SIZE_SPI_MSG_MAXLEN (64 * 4) +#define SJA1105_SIZE_SPI_TRANSFER_MAX \ + (SJA1105_SIZE_SPI_MSG_HEADER + SJA1105_SIZE_SPI_MSG_MAXLEN) + +static int sja1105_spi_transfer(const struct sja1105_private *priv, + const void *tx, void *rx, int size) +{ + struct spi_device *spi = priv->spidev; + struct spi_transfer transfer = { + .tx_buf = tx, + .rx_buf = rx, + .len = size, + }; + struct spi_message msg; + int rc; + + if (size > SJA1105_SIZE_SPI_TRANSFER_MAX) { + dev_err(&spi->dev, "SPI message (%d) longer than max of %d\n", + size, SJA1105_SIZE_SPI_TRANSFER_MAX); + return -EMSGSIZE; + } + + spi_message_init(&msg); + spi_message_add_tail(&transfer, &msg); + + rc = spi_sync(spi, &msg); + if (rc < 0) { + dev_err(&spi->dev, "SPI transfer failed: %d\n", rc); + return rc; + } + + return rc; +} + +static void +sja1105_spi_message_pack(void *buf, const struct sja1105_spi_message *msg) +{ + const int size = SJA1105_SIZE_SPI_MSG_HEADER; + + memset(buf, 0, size); + + sja1105_pack(buf, &msg->access, 31, 31, size); + sja1105_pack(buf, &msg->read_count, 30, 25, size); + sja1105_pack(buf, &msg->address, 24, 4, size); +} + +/* If @rw is: + * - SPI_WRITE: creates and sends an SPI write message at absolute + * address reg_addr, taking size_bytes from *packed_buf + * - SPI_READ: creates and sends an SPI read message from absolute + * address reg_addr, writing size_bytes into *packed_buf + * + * This function should only be called if it is priorly known that + * @size_bytes is smaller than SIZE_SPI_MSG_MAXLEN. Larger packed buffers + * are chunked in smaller pieces by sja1105_spi_send_long_packed_buf below. + */ +int sja1105_spi_send_packed_buf(const struct sja1105_private *priv, + sja1105_spi_rw_mode_t rw, u64 reg_addr, + void *packed_buf, size_t size_bytes) +{ + u8 tx_buf[SJA1105_SIZE_SPI_TRANSFER_MAX] = {0}; + u8 rx_buf[SJA1105_SIZE_SPI_TRANSFER_MAX] = {0}; + const int msg_len = size_bytes + SJA1105_SIZE_SPI_MSG_HEADER; + struct sja1105_spi_message msg = {0}; + int rc; + + if (msg_len > SJA1105_SIZE_SPI_TRANSFER_MAX) + return -ERANGE; + + msg.access = rw; + msg.address = reg_addr; + if (rw == SPI_READ) + msg.read_count = size_bytes / 4; + + sja1105_spi_message_pack(tx_buf, &msg); + + if (rw == SPI_WRITE) + memcpy(tx_buf + SJA1105_SIZE_SPI_MSG_HEADER, + packed_buf, size_bytes); + + rc = sja1105_spi_transfer(priv, tx_buf, rx_buf, msg_len); + if (rc < 0) + return rc; + + if (rw == SPI_READ) + memcpy(packed_buf, rx_buf + SJA1105_SIZE_SPI_MSG_HEADER, + size_bytes); + + return 0; +} + +/* If @rw is: + * - SPI_WRITE: creates and sends an SPI write message at absolute + * address reg_addr, taking size_bytes from *packed_buf + * - SPI_READ: creates and sends an SPI read message from absolute + * address reg_addr, writing size_bytes into *packed_buf + * + * The u64 *value is unpacked, meaning that it's stored in the native + * CPU endianness and directly usable by software running on the core. + * + * This is a wrapper around sja1105_spi_send_packed_buf(). + */ +int sja1105_spi_send_int(const struct sja1105_private *priv, + sja1105_spi_rw_mode_t rw, u64 reg_addr, + u64 *value, u64 size_bytes) +{ + u8 packed_buf[SJA1105_SIZE_SPI_MSG_MAXLEN]; + int rc; + + if (size_bytes > SJA1105_SIZE_SPI_MSG_MAXLEN) + return -ERANGE; + + if (rw == SPI_WRITE) + sja1105_pack(packed_buf, value, 8 * size_bytes - 1, 0, + size_bytes); + + rc = sja1105_spi_send_packed_buf(priv, rw, reg_addr, packed_buf, + size_bytes); + + if (rw == SPI_READ) + sja1105_unpack(packed_buf, value, 8 * size_bytes - 1, 0, + size_bytes); + + return rc; +} + +/* Should be used if a @packed_buf larger than SJA1105_SIZE_SPI_MSG_MAXLEN + * must be sent/received. Splitting the buffer into chunks and assembling + * those into SPI messages is done automatically by this function. + */ +int sja1105_spi_send_long_packed_buf(const struct sja1105_private *priv, + sja1105_spi_rw_mode_t rw, u64 base_addr, + void *packed_buf, u64 buf_len) +{ + struct chunk { + void *buf_ptr; + int len; + u64 spi_address; + } chunk; + int distance_to_end; + int rc; + + /* Initialize chunk */ + chunk.buf_ptr = packed_buf; + chunk.spi_address = base_addr; + chunk.len = min_t(int, buf_len, SJA1105_SIZE_SPI_MSG_MAXLEN); + + while (chunk.len) { + rc = sja1105_spi_send_packed_buf(priv, rw, chunk.spi_address, + chunk.buf_ptr, chunk.len); + if (rc < 0) + return rc; + + chunk.buf_ptr += chunk.len; + chunk.spi_address += chunk.len / 4; + distance_to_end = (uintptr_t)(packed_buf + buf_len - + chunk.buf_ptr); + chunk.len = min(distance_to_end, SJA1105_SIZE_SPI_MSG_MAXLEN); + } + + return 0; +} + +/* Back-ported structure from UM11040 Table 112. + * Reset control register (addr. 100440h) + * In the SJA1105 E/T, only warm_rst and cold_rst are + * supported (exposed in UM10944 as rst_ctrl), but the bit + * offsets of warm_rst and cold_rst are actually reversed. + */ +struct sja1105_reset_cmd { + u64 switch_rst; + u64 cfg_rst; + u64 car_rst; + u64 otp_rst; + u64 warm_rst; + u64 cold_rst; + u64 por_rst; +}; + +static void +sja1105et_reset_cmd_pack(void *buf, const struct sja1105_reset_cmd *reset) +{ + const int size = SJA1105_SIZE_RESET_CMD; + + memset(buf, 0, size); + + sja1105_pack(buf, &reset->cold_rst, 3, 3, size); + sja1105_pack(buf, &reset->warm_rst, 2, 2, size); +} + +static void +sja1105pqrs_reset_cmd_pack(void *buf, const struct sja1105_reset_cmd *reset) +{ + const int size = SJA1105_SIZE_RESET_CMD; + + memset(buf, 0, size); + + sja1105_pack(buf, &reset->switch_rst, 8, 8, size); + sja1105_pack(buf, &reset->cfg_rst, 7, 7, size); + sja1105_pack(buf, &reset->car_rst, 5, 5, size); + sja1105_pack(buf, &reset->otp_rst, 4, 4, size); + sja1105_pack(buf, &reset->warm_rst, 3, 3, size); + sja1105_pack(buf, &reset->cold_rst, 2, 2, size); + sja1105_pack(buf, &reset->por_rst, 1, 1, size); +} + +static int sja1105et_reset_cmd(const void *ctx, const void *data) +{ + const struct sja1105_private *priv = ctx; + const struct sja1105_reset_cmd *reset = data; + const struct sja1105_regs *regs = priv->info->regs; + struct device *dev = priv->ds->dev; + u8 packed_buf[SJA1105_SIZE_RESET_CMD]; + + if (reset->switch_rst || + reset->cfg_rst || + reset->car_rst || + reset->otp_rst || + reset->por_rst) { + dev_err(dev, "Only warm and cold reset is supported " + "for SJA1105 E/T!\n"); + return -EINVAL; + } + + if (reset->warm_rst) + dev_dbg(dev, "Warm reset requested\n"); + if (reset->cold_rst) + dev_dbg(dev, "Cold reset requested\n"); + + sja1105et_reset_cmd_pack(packed_buf, reset); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, regs->rgu, + packed_buf, SJA1105_SIZE_RESET_CMD); +} + +static int sja1105pqrs_reset_cmd(const void *ctx, const void *data) +{ + const struct sja1105_private *priv = ctx; + const struct sja1105_reset_cmd *reset = data; + const struct sja1105_regs *regs = priv->info->regs; + struct device *dev = priv->ds->dev; + u8 packed_buf[SJA1105_SIZE_RESET_CMD]; + + if (reset->switch_rst) + dev_dbg(dev, "Main reset for all functional modules requested\n"); + if (reset->cfg_rst) + dev_dbg(dev, "Chip configuration reset requested\n"); + if (reset->car_rst) + dev_dbg(dev, "Clock and reset control logic reset requested\n"); + if (reset->otp_rst) + dev_dbg(dev, "OTP read cycle for reading product " + "config settings requested\n"); + if (reset->warm_rst) + dev_dbg(dev, "Warm reset requested\n"); + if (reset->cold_rst) + dev_dbg(dev, "Cold reset requested\n"); + if (reset->por_rst) + dev_dbg(dev, "Power-on reset requested\n"); + + sja1105pqrs_reset_cmd_pack(packed_buf, reset); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, regs->rgu, + packed_buf, SJA1105_SIZE_RESET_CMD); +} + +static int sja1105_cold_reset(const struct sja1105_private *priv) +{ + struct sja1105_reset_cmd reset = {0}; + + reset.cold_rst = 1; + return priv->info->reset_cmd(priv, &reset); +} + +int sja1105_inhibit_tx(const struct sja1105_private *priv, + unsigned long port_bitmap, bool tx_inhibited) +{ + const struct sja1105_regs *regs = priv->info->regs; + u64 inhibit_cmd; + int rc; + + rc = sja1105_spi_send_int(priv, SPI_READ, regs->port_control, + &inhibit_cmd, SJA1105_SIZE_PORT_CTRL); + if (rc < 0) + return rc; + + if (tx_inhibited) + inhibit_cmd |= port_bitmap; + else + inhibit_cmd &= ~port_bitmap; + + return sja1105_spi_send_int(priv, SPI_WRITE, regs->port_control, + &inhibit_cmd, SJA1105_SIZE_PORT_CTRL); +} + +struct sja1105_status { + u64 configs; + u64 crcchkl; + u64 ids; + u64 crcchkg; +}; + +/* This is not reading the entire General Status area, which is also + * divergent between E/T and P/Q/R/S, but only the relevant bits for + * ensuring that the static config upload procedure was successful. + */ +static void sja1105_status_unpack(void *buf, struct sja1105_status *status) +{ + /* So that addition translates to 4 bytes */ + u32 *p = buf; + + /* device_id is missing from the buffer, but we don't + * want to diverge from the manual definition of the + * register addresses, so we'll back off one step with + * the register pointer, and never access p[0]. + */ + p--; + sja1105_unpack(p + 0x1, &status->configs, 31, 31, 4); + sja1105_unpack(p + 0x1, &status->crcchkl, 30, 30, 4); + sja1105_unpack(p + 0x1, &status->ids, 29, 29, 4); + sja1105_unpack(p + 0x1, &status->crcchkg, 28, 28, 4); +} + +static int sja1105_status_get(struct sja1105_private *priv, + struct sja1105_status *status) +{ + const struct sja1105_regs *regs = priv->info->regs; + u8 packed_buf[4]; + int rc; + + rc = sja1105_spi_send_packed_buf(priv, SPI_READ, + regs->status, + packed_buf, 4); + if (rc < 0) + return rc; + + sja1105_status_unpack(packed_buf, status); + + return 0; +} + +/* Not const because unpacking priv->static_config into buffers and preparing + * for upload requires the recalculation of table CRCs and updating the + * structures with these. + */ +static int +static_config_buf_prepare_for_upload(struct sja1105_private *priv, + void *config_buf, int buf_len) +{ + struct sja1105_static_config *config = &priv->static_config; + struct sja1105_table_header final_header; + sja1105_config_valid_t valid; + char *final_header_ptr; + int crc_len; + + valid = sja1105_static_config_check_valid(config); + if (valid != SJA1105_CONFIG_OK) { + dev_err(&priv->spidev->dev, + sja1105_static_config_error_msg[valid]); + return -EINVAL; + } + + /* Write Device ID and config tables to config_buf */ + sja1105_static_config_pack(config_buf, config); + /* Recalculate CRC of the last header (right now 0xDEADBEEF). + * Don't include the CRC field itself. + */ + crc_len = buf_len - 4; + /* Read the whole table header */ + final_header_ptr = config_buf + buf_len - SJA1105_SIZE_TABLE_HEADER; + sja1105_table_header_packing(final_header_ptr, &final_header, UNPACK); + /* Modify */ + final_header.crc = sja1105_crc32(config_buf, crc_len); + /* Rewrite */ + sja1105_table_header_packing(final_header_ptr, &final_header, PACK); + + return 0; +} + +#define RETRIES 10 + +int sja1105_static_config_upload(struct sja1105_private *priv) +{ + unsigned long port_bitmap = GENMASK_ULL(SJA1105_NUM_PORTS - 1, 0); + struct sja1105_static_config *config = &priv->static_config; + const struct sja1105_regs *regs = priv->info->regs; + struct device *dev = &priv->spidev->dev; + struct sja1105_status status; + int rc, retries = RETRIES; + u8 *config_buf; + int buf_len; + + buf_len = sja1105_static_config_get_length(config); + config_buf = kcalloc(buf_len, sizeof(char), GFP_KERNEL); + if (!config_buf) + return -ENOMEM; + + rc = static_config_buf_prepare_for_upload(priv, config_buf, buf_len); + if (rc < 0) { + dev_err(dev, "Invalid config, cannot upload\n"); + return -EINVAL; + } + /* Prevent PHY jabbering during switch reset by inhibiting + * Tx on all ports and waiting for current packet to drain. + * Otherwise, the PHY will see an unterminated Ethernet packet. + */ + rc = sja1105_inhibit_tx(priv, port_bitmap, true); + if (rc < 0) { + dev_err(dev, "Failed to inhibit Tx on ports\n"); + return -ENXIO; + } + /* Wait for an eventual egress packet to finish transmission + * (reach IFG). It is guaranteed that a second one will not + * follow, and that switch cold reset is thus safe + */ + usleep_range(500, 1000); + do { + /* Put the SJA1105 in programming mode */ + rc = sja1105_cold_reset(priv); + if (rc < 0) { + dev_err(dev, "Failed to reset switch, retrying...\n"); + continue; + } + /* Wait for the switch to come out of reset */ + usleep_range(1000, 5000); + /* Upload the static config to the device */ + rc = sja1105_spi_send_long_packed_buf(priv, SPI_WRITE, + regs->config, + config_buf, buf_len); + if (rc < 0) { + dev_err(dev, "Failed to upload config, retrying...\n"); + continue; + } + /* Check that SJA1105 responded well to the config upload */ + rc = sja1105_status_get(priv, &status); + if (rc < 0) + continue; + + if (status.ids == 1) { + dev_err(dev, "Mismatch between hardware and static config " + "device id. Wrote 0x%llx, wants 0x%llx\n", + config->device_id, priv->info->device_id); + continue; + } + if (status.crcchkl == 1) { + dev_err(dev, "Switch reported invalid local CRC on " + "the uploaded config, retrying...\n"); + continue; + } + if (status.crcchkg == 1) { + dev_err(dev, "Switch reported invalid global CRC on " + "the uploaded config, retrying...\n"); + continue; + } + if (status.configs == 0) { + dev_err(dev, "Switch reported that configuration is " + "invalid, retrying...\n"); + continue; + } + /* Success! */ + break; + } while (--retries); + + if (!retries) { + rc = -EIO; + dev_err(dev, "Failed to upload config to device, giving up\n"); + goto out; + } else if (retries != RETRIES) { + dev_info(dev, "Succeeded after %d tried\n", RETRIES - retries); + } + + rc = sja1105_ptp_reset(priv); + if (rc < 0) + dev_err(dev, "Failed to reset PTP clock: %d\n", rc); + + dev_info(dev, "Reset switch and programmed static config\n"); + +out: + kfree(config_buf); + return rc; +} + +static struct sja1105_regs sja1105et_regs = { + .device_id = 0x0, + .prod_id = 0x100BC3, + .status = 0x1, + .port_control = 0x11, + .config = 0x020000, + .rgu = 0x100440, + /* UM10944.pdf, Table 86, ACU Register overview */ + .pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808}, + .rmii_pll1 = 0x10000A, + .cgu_idiv = {0x10000B, 0x10000C, 0x10000D, 0x10000E, 0x10000F}, + .mac = {0x200, 0x202, 0x204, 0x206, 0x208}, + .mac_hl1 = {0x400, 0x410, 0x420, 0x430, 0x440}, + .mac_hl2 = {0x600, 0x610, 0x620, 0x630, 0x640}, + /* UM10944.pdf, Table 78, CGU Register overview */ + .mii_tx_clk = {0x100013, 0x10001A, 0x100021, 0x100028, 0x10002F}, + .mii_rx_clk = {0x100014, 0x10001B, 0x100022, 0x100029, 0x100030}, + .mii_ext_tx_clk = {0x100018, 0x10001F, 0x100026, 0x10002D, 0x100034}, + .mii_ext_rx_clk = {0x100019, 0x100020, 0x100027, 0x10002E, 0x100035}, + .rgmii_tx_clk = {0x100016, 0x10001D, 0x100024, 0x10002B, 0x100032}, + .rmii_ref_clk = {0x100015, 0x10001C, 0x100023, 0x10002A, 0x100031}, + .rmii_ext_tx_clk = {0x100018, 0x10001F, 0x100026, 0x10002D, 0x100034}, + .ptpegr_ts = {0xC0, 0xC2, 0xC4, 0xC6, 0xC8}, + .ptp_control = 0x17, + .ptpclk = 0x18, /* Spans 0x18 to 0x19 */ + .ptpclkrate = 0x1A, + .ptptsclk = 0x1B, /* Spans 0x1B to 0x1C */ +}; + +static struct sja1105_regs sja1105pqrs_regs = { + .device_id = 0x0, + .prod_id = 0x100BC3, + .status = 0x1, + .port_control = 0x12, + .config = 0x020000, + .rgu = 0x100440, + /* UM10944.pdf, Table 86, ACU Register overview */ + .pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808}, + .pad_mii_id = {0x100810, 0x100811, 0x100812, 0x100813, 0x100814}, + .rmii_pll1 = 0x10000A, + .cgu_idiv = {0x10000B, 0x10000C, 0x10000D, 0x10000E, 0x10000F}, + .mac = {0x200, 0x202, 0x204, 0x206, 0x208}, + .mac_hl1 = {0x400, 0x410, 0x420, 0x430, 0x440}, + .mac_hl2 = {0x600, 0x610, 0x620, 0x630, 0x640}, + /* UM11040.pdf, Table 114 */ + .mii_tx_clk = {0x100013, 0x100019, 0x10001F, 0x100025, 0x10002B}, + .mii_rx_clk = {0x100014, 0x10001A, 0x100020, 0x100026, 0x10002C}, + .mii_ext_tx_clk = {0x100017, 0x10001D, 0x100023, 0x100029, 0x10002F}, + .mii_ext_rx_clk = {0x100018, 0x10001E, 0x100024, 0x10002A, 0x100030}, + .rgmii_tx_clk = {0x100016, 0x10001C, 0x100022, 0x100028, 0x10002E}, + .rmii_ref_clk = {0x100015, 0x10001B, 0x100021, 0x100027, 0x10002D}, + .rmii_ext_tx_clk = {0x100017, 0x10001D, 0x100023, 0x100029, 0x10002F}, + .qlevel = {0x604, 0x614, 0x624, 0x634, 0x644}, + .ptpegr_ts = {0xC0, 0xC4, 0xC8, 0xCC, 0xD0}, + .ptp_control = 0x18, + .ptpclk = 0x19, + .ptpclkrate = 0x1B, + .ptptsclk = 0x1C, +}; + +struct sja1105_info sja1105e_info = { + .device_id = SJA1105E_DEVICE_ID, + .part_no = SJA1105ET_PART_NO, + .static_ops = sja1105e_table_ops, + .dyn_ops = sja1105et_dyn_ops, + .ptp_ts_bits = 24, + .ptpegr_ts_bytes = 4, + .reset_cmd = sja1105et_reset_cmd, + .fdb_add_cmd = sja1105et_fdb_add, + .fdb_del_cmd = sja1105et_fdb_del, + .ptp_cmd = sja1105et_ptp_cmd, + .regs = &sja1105et_regs, + .name = "SJA1105E", +}; +struct sja1105_info sja1105t_info = { + .device_id = SJA1105T_DEVICE_ID, + .part_no = SJA1105ET_PART_NO, + .static_ops = sja1105t_table_ops, + .dyn_ops = sja1105et_dyn_ops, + .ptp_ts_bits = 24, + .ptpegr_ts_bytes = 4, + .reset_cmd = sja1105et_reset_cmd, + .fdb_add_cmd = sja1105et_fdb_add, + .fdb_del_cmd = sja1105et_fdb_del, + .ptp_cmd = sja1105et_ptp_cmd, + .regs = &sja1105et_regs, + .name = "SJA1105T", +}; +struct sja1105_info sja1105p_info = { + .device_id = SJA1105PR_DEVICE_ID, + .part_no = SJA1105P_PART_NO, + .static_ops = sja1105p_table_ops, + .dyn_ops = sja1105pqrs_dyn_ops, + .ptp_ts_bits = 32, + .ptpegr_ts_bytes = 8, + .setup_rgmii_delay = sja1105pqrs_setup_rgmii_delay, + .reset_cmd = sja1105pqrs_reset_cmd, + .fdb_add_cmd = sja1105pqrs_fdb_add, + .fdb_del_cmd = sja1105pqrs_fdb_del, + .ptp_cmd = sja1105pqrs_ptp_cmd, + .regs = &sja1105pqrs_regs, + .name = "SJA1105P", +}; +struct sja1105_info sja1105q_info = { + .device_id = SJA1105QS_DEVICE_ID, + .part_no = SJA1105Q_PART_NO, + .static_ops = sja1105q_table_ops, + .dyn_ops = sja1105pqrs_dyn_ops, + .ptp_ts_bits = 32, + .ptpegr_ts_bytes = 8, + .setup_rgmii_delay = sja1105pqrs_setup_rgmii_delay, + .reset_cmd = sja1105pqrs_reset_cmd, + .fdb_add_cmd = sja1105pqrs_fdb_add, + .fdb_del_cmd = sja1105pqrs_fdb_del, + .ptp_cmd = sja1105pqrs_ptp_cmd, + .regs = &sja1105pqrs_regs, + .name = "SJA1105Q", +}; +struct sja1105_info sja1105r_info = { + .device_id = SJA1105PR_DEVICE_ID, + .part_no = SJA1105R_PART_NO, + .static_ops = sja1105r_table_ops, + .dyn_ops = sja1105pqrs_dyn_ops, + .ptp_ts_bits = 32, + .ptpegr_ts_bytes = 8, + .setup_rgmii_delay = sja1105pqrs_setup_rgmii_delay, + .reset_cmd = sja1105pqrs_reset_cmd, + .fdb_add_cmd = sja1105pqrs_fdb_add, + .fdb_del_cmd = sja1105pqrs_fdb_del, + .ptp_cmd = sja1105pqrs_ptp_cmd, + .regs = &sja1105pqrs_regs, + .name = "SJA1105R", +}; +struct sja1105_info sja1105s_info = { + .device_id = SJA1105QS_DEVICE_ID, + .part_no = SJA1105S_PART_NO, + .static_ops = sja1105s_table_ops, + .dyn_ops = sja1105pqrs_dyn_ops, + .regs = &sja1105pqrs_regs, + .ptp_ts_bits = 32, + .ptpegr_ts_bytes = 8, + .setup_rgmii_delay = sja1105pqrs_setup_rgmii_delay, + .reset_cmd = sja1105pqrs_reset_cmd, + .fdb_add_cmd = sja1105pqrs_fdb_add, + .fdb_del_cmd = sja1105pqrs_fdb_del, + .ptp_cmd = sja1105pqrs_ptp_cmd, + .name = "SJA1105S", +}; diff --git a/drivers/net/dsa/sja1105/sja1105_static_config.c b/drivers/net/dsa/sja1105/sja1105_static_config.c new file mode 100644 index 000000000000..b31c737dc560 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_static_config.c @@ -0,0 +1,1065 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* Copyright (c) 2016-2018, NXP Semiconductors + * Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com> + */ +#include "sja1105_static_config.h" +#include <linux/crc32.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/errno.h> + +/* Convenience wrappers over the generic packing functions. These take into + * account the SJA1105 memory layout quirks and provide some level of + * programmer protection against incorrect API use. The errors are not expected + * to occur durring runtime, therefore printing and swallowing them here is + * appropriate instead of clutterring up higher-level code. + */ +void sja1105_pack(void *buf, const u64 *val, int start, int end, size_t len) +{ + int rc = packing(buf, (u64 *)val, start, end, len, + PACK, QUIRK_LSW32_IS_FIRST); + + if (likely(!rc)) + return; + + if (rc == -EINVAL) { + pr_err("Start bit (%d) expected to be larger than end (%d)\n", + start, end); + } else if (rc == -ERANGE) { + if ((start - end + 1) > 64) + pr_err("Field %d-%d too large for 64 bits!\n", + start, end); + else + pr_err("Cannot store %llx inside bits %d-%d (would truncate)\n", + *val, start, end); + } + dump_stack(); +} + +void sja1105_unpack(const void *buf, u64 *val, int start, int end, size_t len) +{ + int rc = packing((void *)buf, val, start, end, len, + UNPACK, QUIRK_LSW32_IS_FIRST); + + if (likely(!rc)) + return; + + if (rc == -EINVAL) + pr_err("Start bit (%d) expected to be larger than end (%d)\n", + start, end); + else if (rc == -ERANGE) + pr_err("Field %d-%d too large for 64 bits!\n", + start, end); + dump_stack(); +} + +void sja1105_packing(void *buf, u64 *val, int start, int end, + size_t len, enum packing_op op) +{ + int rc = packing(buf, val, start, end, len, op, QUIRK_LSW32_IS_FIRST); + + if (likely(!rc)) + return; + + if (rc == -EINVAL) { + pr_err("Start bit (%d) expected to be larger than end (%d)\n", + start, end); + } else if (rc == -ERANGE) { + if ((start - end + 1) > 64) + pr_err("Field %d-%d too large for 64 bits!\n", + start, end); + else + pr_err("Cannot store %llx inside bits %d-%d (would truncate)\n", + *val, start, end); + } + dump_stack(); +} + +/* Little-endian Ethernet CRC32 of data packed as big-endian u32 words */ +u32 sja1105_crc32(const void *buf, size_t len) +{ + unsigned int i; + u64 word; + u32 crc; + + /* seed */ + crc = ~0; + for (i = 0; i < len; i += 4) { + sja1105_unpack((void *)buf + i, &word, 31, 0, 4); + crc = crc32_le(crc, (u8 *)&word, 4); + } + return ~crc; +} + +static size_t sja1105et_avb_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105ET_SIZE_AVB_PARAMS_ENTRY; + struct sja1105_avb_params_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->destmeta, 95, 48, size, op); + sja1105_packing(buf, &entry->srcmeta, 47, 0, size, op); + return size; +} + +static size_t sja1105pqrs_avb_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105PQRS_SIZE_AVB_PARAMS_ENTRY; + struct sja1105_avb_params_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->destmeta, 125, 78, size, op); + sja1105_packing(buf, &entry->srcmeta, 77, 30, size, op); + return size; +} + +static size_t sja1105et_general_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105ET_SIZE_GENERAL_PARAMS_ENTRY; + struct sja1105_general_params_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->vllupformat, 319, 319, size, op); + sja1105_packing(buf, &entry->mirr_ptacu, 318, 318, size, op); + sja1105_packing(buf, &entry->switchid, 317, 315, size, op); + sja1105_packing(buf, &entry->hostprio, 314, 312, size, op); + sja1105_packing(buf, &entry->mac_fltres1, 311, 264, size, op); + sja1105_packing(buf, &entry->mac_fltres0, 263, 216, size, op); + sja1105_packing(buf, &entry->mac_flt1, 215, 168, size, op); + sja1105_packing(buf, &entry->mac_flt0, 167, 120, size, op); + sja1105_packing(buf, &entry->incl_srcpt1, 119, 119, size, op); + sja1105_packing(buf, &entry->incl_srcpt0, 118, 118, size, op); + sja1105_packing(buf, &entry->send_meta1, 117, 117, size, op); + sja1105_packing(buf, &entry->send_meta0, 116, 116, size, op); + sja1105_packing(buf, &entry->casc_port, 115, 113, size, op); + sja1105_packing(buf, &entry->host_port, 112, 110, size, op); + sja1105_packing(buf, &entry->mirr_port, 109, 107, size, op); + sja1105_packing(buf, &entry->vlmarker, 106, 75, size, op); + sja1105_packing(buf, &entry->vlmask, 74, 43, size, op); + sja1105_packing(buf, &entry->tpid, 42, 27, size, op); + sja1105_packing(buf, &entry->ignore2stf, 26, 26, size, op); + sja1105_packing(buf, &entry->tpid2, 25, 10, size, op); + return size; +} + +static size_t +sja1105pqrs_general_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY; + struct sja1105_general_params_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->vllupformat, 351, 351, size, op); + sja1105_packing(buf, &entry->mirr_ptacu, 350, 350, size, op); + sja1105_packing(buf, &entry->switchid, 349, 347, size, op); + sja1105_packing(buf, &entry->hostprio, 346, 344, size, op); + sja1105_packing(buf, &entry->mac_fltres1, 343, 296, size, op); + sja1105_packing(buf, &entry->mac_fltres0, 295, 248, size, op); + sja1105_packing(buf, &entry->mac_flt1, 247, 200, size, op); + sja1105_packing(buf, &entry->mac_flt0, 199, 152, size, op); + sja1105_packing(buf, &entry->incl_srcpt1, 151, 151, size, op); + sja1105_packing(buf, &entry->incl_srcpt0, 150, 150, size, op); + sja1105_packing(buf, &entry->send_meta1, 149, 149, size, op); + sja1105_packing(buf, &entry->send_meta0, 148, 148, size, op); + sja1105_packing(buf, &entry->casc_port, 147, 145, size, op); + sja1105_packing(buf, &entry->host_port, 144, 142, size, op); + sja1105_packing(buf, &entry->mirr_port, 141, 139, size, op); + sja1105_packing(buf, &entry->vlmarker, 138, 107, size, op); + sja1105_packing(buf, &entry->vlmask, 106, 75, size, op); + sja1105_packing(buf, &entry->tpid, 74, 59, size, op); + sja1105_packing(buf, &entry->ignore2stf, 58, 58, size, op); + sja1105_packing(buf, &entry->tpid2, 57, 42, size, op); + sja1105_packing(buf, &entry->queue_ts, 41, 41, size, op); + sja1105_packing(buf, &entry->egrmirrvid, 40, 29, size, op); + sja1105_packing(buf, &entry->egrmirrpcp, 28, 26, size, op); + sja1105_packing(buf, &entry->egrmirrdei, 25, 25, size, op); + sja1105_packing(buf, &entry->replay_port, 24, 22, size, op); + return size; +} + +static size_t +sja1105_l2_forwarding_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY; + struct sja1105_l2_forwarding_params_entry *entry = entry_ptr; + int offset, i; + + sja1105_packing(buf, &entry->max_dynp, 95, 93, size, op); + for (i = 0, offset = 13; i < 8; i++, offset += 10) + sja1105_packing(buf, &entry->part_spc[i], + offset + 9, offset + 0, size, op); + return size; +} + +size_t sja1105_l2_forwarding_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105_SIZE_L2_FORWARDING_ENTRY; + struct sja1105_l2_forwarding_entry *entry = entry_ptr; + int offset, i; + + sja1105_packing(buf, &entry->bc_domain, 63, 59, size, op); + sja1105_packing(buf, &entry->reach_port, 58, 54, size, op); + sja1105_packing(buf, &entry->fl_domain, 53, 49, size, op); + for (i = 0, offset = 25; i < 8; i++, offset += 3) + sja1105_packing(buf, &entry->vlan_pmap[i], + offset + 2, offset + 0, size, op); + return size; +} + +static size_t +sja1105et_l2_lookup_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105ET_SIZE_L2_LOOKUP_PARAMS_ENTRY; + struct sja1105_l2_lookup_params_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->maxage, 31, 17, size, op); + sja1105_packing(buf, &entry->dyn_tbsz, 16, 14, size, op); + sja1105_packing(buf, &entry->poly, 13, 6, size, op); + sja1105_packing(buf, &entry->shared_learn, 5, 5, size, op); + sja1105_packing(buf, &entry->no_enf_hostprt, 4, 4, size, op); + sja1105_packing(buf, &entry->no_mgmt_learn, 3, 3, size, op); + return size; +} + +static size_t +sja1105pqrs_l2_lookup_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105PQRS_SIZE_L2_LOOKUP_PARAMS_ENTRY; + struct sja1105_l2_lookup_params_entry *entry = entry_ptr; + int offset, i; + + for (i = 0, offset = 58; i < 5; i++, offset += 11) + sja1105_packing(buf, &entry->maxaddrp[i], + offset + 10, offset + 0, size, op); + sja1105_packing(buf, &entry->maxage, 57, 43, size, op); + sja1105_packing(buf, &entry->start_dynspc, 42, 33, size, op); + sja1105_packing(buf, &entry->drpnolearn, 32, 28, size, op); + sja1105_packing(buf, &entry->shared_learn, 27, 27, size, op); + sja1105_packing(buf, &entry->no_enf_hostprt, 26, 26, size, op); + sja1105_packing(buf, &entry->no_mgmt_learn, 25, 25, size, op); + sja1105_packing(buf, &entry->use_static, 24, 24, size, op); + sja1105_packing(buf, &entry->owr_dyn, 23, 23, size, op); + sja1105_packing(buf, &entry->learn_once, 22, 22, size, op); + return size; +} + +size_t sja1105et_l2_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105ET_SIZE_L2_LOOKUP_ENTRY; + struct sja1105_l2_lookup_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->vlanid, 95, 84, size, op); + sja1105_packing(buf, &entry->macaddr, 83, 36, size, op); + sja1105_packing(buf, &entry->destports, 35, 31, size, op); + sja1105_packing(buf, &entry->enfport, 30, 30, size, op); + sja1105_packing(buf, &entry->index, 29, 20, size, op); + return size; +} + +size_t sja1105pqrs_l2_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY; + struct sja1105_l2_lookup_entry *entry = entry_ptr; + + if (entry->lockeds) { + sja1105_packing(buf, &entry->tsreg, 159, 159, size, op); + sja1105_packing(buf, &entry->mirrvlan, 158, 147, size, op); + sja1105_packing(buf, &entry->takets, 146, 146, size, op); + sja1105_packing(buf, &entry->mirr, 145, 145, size, op); + sja1105_packing(buf, &entry->retag, 144, 144, size, op); + } else { + sja1105_packing(buf, &entry->touched, 159, 159, size, op); + sja1105_packing(buf, &entry->age, 158, 144, size, op); + } + sja1105_packing(buf, &entry->mask_iotag, 143, 143, size, op); + sja1105_packing(buf, &entry->mask_vlanid, 142, 131, size, op); + sja1105_packing(buf, &entry->mask_macaddr, 130, 83, size, op); + sja1105_packing(buf, &entry->iotag, 82, 82, size, op); + sja1105_packing(buf, &entry->vlanid, 81, 70, size, op); + sja1105_packing(buf, &entry->macaddr, 69, 22, size, op); + sja1105_packing(buf, &entry->destports, 21, 17, size, op); + sja1105_packing(buf, &entry->enfport, 16, 16, size, op); + sja1105_packing(buf, &entry->index, 15, 6, size, op); + return size; +} + +static size_t sja1105_l2_policing_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105_SIZE_L2_POLICING_ENTRY; + struct sja1105_l2_policing_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->sharindx, 63, 58, size, op); + sja1105_packing(buf, &entry->smax, 57, 42, size, op); + sja1105_packing(buf, &entry->rate, 41, 26, size, op); + sja1105_packing(buf, &entry->maxlen, 25, 15, size, op); + sja1105_packing(buf, &entry->partition, 14, 12, size, op); + return size; +} + +static size_t sja1105et_mac_config_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105ET_SIZE_MAC_CONFIG_ENTRY; + struct sja1105_mac_config_entry *entry = entry_ptr; + int offset, i; + + for (i = 0, offset = 72; i < 8; i++, offset += 19) { + sja1105_packing(buf, &entry->enabled[i], + offset + 0, offset + 0, size, op); + sja1105_packing(buf, &entry->base[i], + offset + 9, offset + 1, size, op); + sja1105_packing(buf, &entry->top[i], + offset + 18, offset + 10, size, op); + } + sja1105_packing(buf, &entry->ifg, 71, 67, size, op); + sja1105_packing(buf, &entry->speed, 66, 65, size, op); + sja1105_packing(buf, &entry->tp_delin, 64, 49, size, op); + sja1105_packing(buf, &entry->tp_delout, 48, 33, size, op); + sja1105_packing(buf, &entry->maxage, 32, 25, size, op); + sja1105_packing(buf, &entry->vlanprio, 24, 22, size, op); + sja1105_packing(buf, &entry->vlanid, 21, 10, size, op); + sja1105_packing(buf, &entry->ing_mirr, 9, 9, size, op); + sja1105_packing(buf, &entry->egr_mirr, 8, 8, size, op); + sja1105_packing(buf, &entry->drpnona664, 7, 7, size, op); + sja1105_packing(buf, &entry->drpdtag, 6, 6, size, op); + sja1105_packing(buf, &entry->drpuntag, 5, 5, size, op); + sja1105_packing(buf, &entry->retag, 4, 4, size, op); + sja1105_packing(buf, &entry->dyn_learn, 3, 3, size, op); + sja1105_packing(buf, &entry->egress, 2, 2, size, op); + sja1105_packing(buf, &entry->ingress, 1, 1, size, op); + return size; +} + +size_t sja1105pqrs_mac_config_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY; + struct sja1105_mac_config_entry *entry = entry_ptr; + int offset, i; + + for (i = 0, offset = 104; i < 8; i++, offset += 19) { + sja1105_packing(buf, &entry->enabled[i], + offset + 0, offset + 0, size, op); + sja1105_packing(buf, &entry->base[i], + offset + 9, offset + 1, size, op); + sja1105_packing(buf, &entry->top[i], + offset + 18, offset + 10, size, op); + } + sja1105_packing(buf, &entry->ifg, 103, 99, size, op); + sja1105_packing(buf, &entry->speed, 98, 97, size, op); + sja1105_packing(buf, &entry->tp_delin, 96, 81, size, op); + sja1105_packing(buf, &entry->tp_delout, 80, 65, size, op); + sja1105_packing(buf, &entry->maxage, 64, 57, size, op); + sja1105_packing(buf, &entry->vlanprio, 56, 54, size, op); + sja1105_packing(buf, &entry->vlanid, 53, 42, size, op); + sja1105_packing(buf, &entry->ing_mirr, 41, 41, size, op); + sja1105_packing(buf, &entry->egr_mirr, 40, 40, size, op); + sja1105_packing(buf, &entry->drpnona664, 39, 39, size, op); + sja1105_packing(buf, &entry->drpdtag, 38, 38, size, op); + sja1105_packing(buf, &entry->drpuntag, 35, 35, size, op); + sja1105_packing(buf, &entry->retag, 34, 34, size, op); + sja1105_packing(buf, &entry->dyn_learn, 33, 33, size, op); + sja1105_packing(buf, &entry->egress, 32, 32, size, op); + sja1105_packing(buf, &entry->ingress, 31, 31, size, op); + return size; +} + +size_t sja1105_vlan_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY; + struct sja1105_vlan_lookup_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->ving_mirr, 63, 59, size, op); + sja1105_packing(buf, &entry->vegr_mirr, 58, 54, size, op); + sja1105_packing(buf, &entry->vmemb_port, 53, 49, size, op); + sja1105_packing(buf, &entry->vlan_bc, 48, 44, size, op); + sja1105_packing(buf, &entry->tag_port, 43, 39, size, op); + sja1105_packing(buf, &entry->vlanid, 38, 27, size, op); + return size; +} + +static size_t sja1105_xmii_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105_SIZE_XMII_PARAMS_ENTRY; + struct sja1105_xmii_params_entry *entry = entry_ptr; + int offset, i; + + for (i = 0, offset = 17; i < 5; i++, offset += 3) { + sja1105_packing(buf, &entry->xmii_mode[i], + offset + 1, offset + 0, size, op); + sja1105_packing(buf, &entry->phy_mac[i], + offset + 2, offset + 2, size, op); + } + return size; +} + +size_t sja1105_table_header_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105_SIZE_TABLE_HEADER; + struct sja1105_table_header *entry = entry_ptr; + + sja1105_packing(buf, &entry->block_id, 31, 24, size, op); + sja1105_packing(buf, &entry->len, 55, 32, size, op); + sja1105_packing(buf, &entry->crc, 95, 64, size, op); + return size; +} + +/* WARNING: the *hdr pointer is really non-const, because it is + * modifying the CRC of the header for a 2-stage packing operation + */ +void +sja1105_table_header_pack_with_crc(void *buf, struct sja1105_table_header *hdr) +{ + /* First pack the table as-is, then calculate the CRC, and + * finally put the proper CRC into the packed buffer + */ + memset(buf, 0, SJA1105_SIZE_TABLE_HEADER); + sja1105_table_header_packing(buf, hdr, PACK); + hdr->crc = sja1105_crc32(buf, SJA1105_SIZE_TABLE_HEADER - 4); + sja1105_pack(buf + SJA1105_SIZE_TABLE_HEADER - 4, &hdr->crc, 31, 0, 4); +} + +static void sja1105_table_write_crc(u8 *table_start, u8 *crc_ptr) +{ + u64 computed_crc; + int len_bytes; + + len_bytes = (uintptr_t)(crc_ptr - table_start); + computed_crc = sja1105_crc32(table_start, len_bytes); + sja1105_pack(crc_ptr, &computed_crc, 31, 0, 4); +} + +/* The block IDs that the switches support are unfortunately sparse, so keep a + * mapping table to "block indices" and translate back and forth so that we + * don't waste useless memory in struct sja1105_static_config. + * Also, since the block id comes from essentially untrusted input (unpacking + * the static config from userspace) it has to be sanitized (range-checked) + * before blindly indexing kernel memory with the blk_idx. + */ +static u64 blk_id_map[BLK_IDX_MAX] = { + [BLK_IDX_L2_LOOKUP] = BLKID_L2_LOOKUP, + [BLK_IDX_L2_POLICING] = BLKID_L2_POLICING, + [BLK_IDX_VLAN_LOOKUP] = BLKID_VLAN_LOOKUP, + [BLK_IDX_L2_FORWARDING] = BLKID_L2_FORWARDING, + [BLK_IDX_MAC_CONFIG] = BLKID_MAC_CONFIG, + [BLK_IDX_L2_LOOKUP_PARAMS] = BLKID_L2_LOOKUP_PARAMS, + [BLK_IDX_L2_FORWARDING_PARAMS] = BLKID_L2_FORWARDING_PARAMS, + [BLK_IDX_AVB_PARAMS] = BLKID_AVB_PARAMS, + [BLK_IDX_GENERAL_PARAMS] = BLKID_GENERAL_PARAMS, + [BLK_IDX_XMII_PARAMS] = BLKID_XMII_PARAMS, +}; + +const char *sja1105_static_config_error_msg[] = { + [SJA1105_CONFIG_OK] = "", + [SJA1105_MISSING_L2_POLICING_TABLE] = + "l2-policing-table needs to have at least one entry", + [SJA1105_MISSING_L2_FORWARDING_TABLE] = + "l2-forwarding-table is either missing or incomplete", + [SJA1105_MISSING_L2_FORWARDING_PARAMS_TABLE] = + "l2-forwarding-parameters-table is missing", + [SJA1105_MISSING_GENERAL_PARAMS_TABLE] = + "general-parameters-table is missing", + [SJA1105_MISSING_VLAN_TABLE] = + "vlan-lookup-table needs to have at least the default untagged VLAN", + [SJA1105_MISSING_XMII_TABLE] = + "xmii-table is missing", + [SJA1105_MISSING_MAC_TABLE] = + "mac-configuration-table needs to contain an entry for each port", + [SJA1105_OVERCOMMITTED_FRAME_MEMORY] = + "Not allowed to overcommit frame memory. L2 memory partitions " + "and VL memory partitions share the same space. The sum of all " + "16 memory partitions is not allowed to be larger than 929 " + "128-byte blocks (or 910 with retagging). Please adjust " + "l2-forwarding-parameters-table.part_spc and/or " + "vl-forwarding-parameters-table.partspc.", +}; + +static sja1105_config_valid_t +static_config_check_memory_size(const struct sja1105_table *tables) +{ + const struct sja1105_l2_forwarding_params_entry *l2_fwd_params; + int i, mem = 0; + + l2_fwd_params = tables[BLK_IDX_L2_FORWARDING_PARAMS].entries; + + for (i = 0; i < 8; i++) + mem += l2_fwd_params->part_spc[i]; + + if (mem > SJA1105_MAX_FRAME_MEMORY) + return SJA1105_OVERCOMMITTED_FRAME_MEMORY; + + return SJA1105_CONFIG_OK; +} + +sja1105_config_valid_t +sja1105_static_config_check_valid(const struct sja1105_static_config *config) +{ + const struct sja1105_table *tables = config->tables; +#define IS_FULL(blk_idx) \ + (tables[blk_idx].entry_count == tables[blk_idx].ops->max_entry_count) + + if (tables[BLK_IDX_L2_POLICING].entry_count == 0) + return SJA1105_MISSING_L2_POLICING_TABLE; + + if (tables[BLK_IDX_VLAN_LOOKUP].entry_count == 0) + return SJA1105_MISSING_VLAN_TABLE; + + if (!IS_FULL(BLK_IDX_L2_FORWARDING)) + return SJA1105_MISSING_L2_FORWARDING_TABLE; + + if (!IS_FULL(BLK_IDX_MAC_CONFIG)) + return SJA1105_MISSING_MAC_TABLE; + + if (!IS_FULL(BLK_IDX_L2_FORWARDING_PARAMS)) + return SJA1105_MISSING_L2_FORWARDING_PARAMS_TABLE; + + if (!IS_FULL(BLK_IDX_GENERAL_PARAMS)) + return SJA1105_MISSING_GENERAL_PARAMS_TABLE; + + if (!IS_FULL(BLK_IDX_XMII_PARAMS)) + return SJA1105_MISSING_XMII_TABLE; + + return static_config_check_memory_size(tables); +#undef IS_FULL +} + +void +sja1105_static_config_pack(void *buf, struct sja1105_static_config *config) +{ + struct sja1105_table_header header = {0}; + enum sja1105_blk_idx i; + char *p = buf; + int j; + + sja1105_pack(p, &config->device_id, 31, 0, 4); + p += SJA1105_SIZE_DEVICE_ID; + + for (i = 0; i < BLK_IDX_MAX; i++) { + const struct sja1105_table *table; + char *table_start; + + table = &config->tables[i]; + if (!table->entry_count) + continue; + + header.block_id = blk_id_map[i]; + header.len = table->entry_count * + table->ops->packed_entry_size / 4; + sja1105_table_header_pack_with_crc(p, &header); + p += SJA1105_SIZE_TABLE_HEADER; + table_start = p; + for (j = 0; j < table->entry_count; j++) { + u8 *entry_ptr = table->entries; + + entry_ptr += j * table->ops->unpacked_entry_size; + memset(p, 0, table->ops->packed_entry_size); + table->ops->packing(p, entry_ptr, PACK); + p += table->ops->packed_entry_size; + } + sja1105_table_write_crc(table_start, p); + p += 4; + } + /* Final header: + * Block ID does not matter + * Length of 0 marks that header is final + * CRC will be replaced on-the-fly on "config upload" + */ + header.block_id = 0; + header.len = 0; + header.crc = 0xDEADBEEF; + memset(p, 0, SJA1105_SIZE_TABLE_HEADER); + sja1105_table_header_packing(p, &header, PACK); +} + +size_t +sja1105_static_config_get_length(const struct sja1105_static_config *config) +{ + unsigned int sum; + unsigned int header_count; + enum sja1105_blk_idx i; + + /* Ending header */ + header_count = 1; + sum = SJA1105_SIZE_DEVICE_ID; + + /* Tables (headers and entries) */ + for (i = 0; i < BLK_IDX_MAX; i++) { + const struct sja1105_table *table; + + table = &config->tables[i]; + if (table->entry_count) + header_count++; + + sum += table->ops->packed_entry_size * table->entry_count; + } + /* Headers have an additional CRC at the end */ + sum += header_count * (SJA1105_SIZE_TABLE_HEADER + 4); + /* Last header does not have an extra CRC because there is no data */ + sum -= 4; + + return sum; +} + +/* Compatibility matrices */ + +/* SJA1105E: First generation, no TTEthernet */ +struct sja1105_table_ops sja1105e_table_ops[BLK_IDX_MAX] = { + [BLK_IDX_L2_LOOKUP] = { + .packing = sja1105et_l2_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_entry), + .packed_entry_size = SJA1105ET_SIZE_L2_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, + }, + [BLK_IDX_L2_POLICING] = { + .packing = sja1105_l2_policing_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_policing_entry), + .packed_entry_size = SJA1105_SIZE_L2_POLICING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_POLICING_COUNT, + }, + [BLK_IDX_VLAN_LOOKUP] = { + .packing = sja1105_vlan_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vlan_lookup_entry), + .packed_entry_size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + }, + [BLK_IDX_L2_FORWARDING] = { + .packing = sja1105_l2_forwarding_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, + }, + [BLK_IDX_MAC_CONFIG] = { + .packing = sja1105et_mac_config_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_mac_config_entry), + .packed_entry_size = SJA1105ET_SIZE_MAC_CONFIG_ENTRY, + .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, + }, + [BLK_IDX_L2_LOOKUP_PARAMS] = { + .packing = sja1105et_l2_lookup_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_params_entry), + .packed_entry_size = SJA1105ET_SIZE_L2_LOOKUP_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = { + .packing = sja1105_l2_forwarding_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_params_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT, + }, + [BLK_IDX_AVB_PARAMS] = { + .packing = sja1105et_avb_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_avb_params_entry), + .packed_entry_size = SJA1105ET_SIZE_AVB_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_AVB_PARAMS_COUNT, + }, + [BLK_IDX_GENERAL_PARAMS] = { + .packing = sja1105et_general_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_general_params_entry), + .packed_entry_size = SJA1105ET_SIZE_GENERAL_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + }, + [BLK_IDX_XMII_PARAMS] = { + .packing = sja1105_xmii_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_xmii_params_entry), + .packed_entry_size = SJA1105_SIZE_XMII_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT, + }, +}; + +/* SJA1105T: First generation, TTEthernet */ +struct sja1105_table_ops sja1105t_table_ops[BLK_IDX_MAX] = { + [BLK_IDX_L2_LOOKUP] = { + .packing = sja1105et_l2_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_entry), + .packed_entry_size = SJA1105ET_SIZE_L2_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, + }, + [BLK_IDX_L2_POLICING] = { + .packing = sja1105_l2_policing_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_policing_entry), + .packed_entry_size = SJA1105_SIZE_L2_POLICING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_POLICING_COUNT, + }, + [BLK_IDX_VLAN_LOOKUP] = { + .packing = sja1105_vlan_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vlan_lookup_entry), + .packed_entry_size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + }, + [BLK_IDX_L2_FORWARDING] = { + .packing = sja1105_l2_forwarding_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, + }, + [BLK_IDX_MAC_CONFIG] = { + .packing = sja1105et_mac_config_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_mac_config_entry), + .packed_entry_size = SJA1105ET_SIZE_MAC_CONFIG_ENTRY, + .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, + }, + [BLK_IDX_L2_LOOKUP_PARAMS] = { + .packing = sja1105et_l2_lookup_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_params_entry), + .packed_entry_size = SJA1105ET_SIZE_L2_LOOKUP_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = { + .packing = sja1105_l2_forwarding_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_params_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT, + }, + [BLK_IDX_AVB_PARAMS] = { + .packing = sja1105et_avb_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_avb_params_entry), + .packed_entry_size = SJA1105ET_SIZE_AVB_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_AVB_PARAMS_COUNT, + }, + [BLK_IDX_GENERAL_PARAMS] = { + .packing = sja1105et_general_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_general_params_entry), + .packed_entry_size = SJA1105ET_SIZE_GENERAL_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + }, + [BLK_IDX_XMII_PARAMS] = { + .packing = sja1105_xmii_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_xmii_params_entry), + .packed_entry_size = SJA1105_SIZE_XMII_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT, + }, +}; + +/* SJA1105P: Second generation, no TTEthernet, no SGMII */ +struct sja1105_table_ops sja1105p_table_ops[BLK_IDX_MAX] = { + [BLK_IDX_L2_LOOKUP] = { + .packing = sja1105pqrs_l2_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_entry), + .packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, + }, + [BLK_IDX_L2_POLICING] = { + .packing = sja1105_l2_policing_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_policing_entry), + .packed_entry_size = SJA1105_SIZE_L2_POLICING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_POLICING_COUNT, + }, + [BLK_IDX_VLAN_LOOKUP] = { + .packing = sja1105_vlan_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vlan_lookup_entry), + .packed_entry_size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + }, + [BLK_IDX_L2_FORWARDING] = { + .packing = sja1105_l2_forwarding_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, + }, + [BLK_IDX_MAC_CONFIG] = { + .packing = sja1105pqrs_mac_config_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_mac_config_entry), + .packed_entry_size = SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY, + .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, + }, + [BLK_IDX_L2_LOOKUP_PARAMS] = { + .packing = sja1105pqrs_l2_lookup_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = { + .packing = sja1105_l2_forwarding_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_params_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT, + }, + [BLK_IDX_AVB_PARAMS] = { + .packing = sja1105pqrs_avb_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_avb_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_AVB_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_AVB_PARAMS_COUNT, + }, + [BLK_IDX_GENERAL_PARAMS] = { + .packing = sja1105pqrs_general_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_general_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + }, + [BLK_IDX_XMII_PARAMS] = { + .packing = sja1105_xmii_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_xmii_params_entry), + .packed_entry_size = SJA1105_SIZE_XMII_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT, + }, +}; + +/* SJA1105Q: Second generation, TTEthernet, no SGMII */ +struct sja1105_table_ops sja1105q_table_ops[BLK_IDX_MAX] = { + [BLK_IDX_L2_LOOKUP] = { + .packing = sja1105pqrs_l2_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_entry), + .packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, + }, + [BLK_IDX_L2_POLICING] = { + .packing = sja1105_l2_policing_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_policing_entry), + .packed_entry_size = SJA1105_SIZE_L2_POLICING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_POLICING_COUNT, + }, + [BLK_IDX_VLAN_LOOKUP] = { + .packing = sja1105_vlan_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vlan_lookup_entry), + .packed_entry_size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + }, + [BLK_IDX_L2_FORWARDING] = { + .packing = sja1105_l2_forwarding_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, + }, + [BLK_IDX_MAC_CONFIG] = { + .packing = sja1105pqrs_mac_config_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_mac_config_entry), + .packed_entry_size = SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY, + .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, + }, + [BLK_IDX_L2_LOOKUP_PARAMS] = { + .packing = sja1105pqrs_l2_lookup_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = { + .packing = sja1105_l2_forwarding_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_params_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT, + }, + [BLK_IDX_AVB_PARAMS] = { + .packing = sja1105pqrs_avb_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_avb_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_AVB_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_AVB_PARAMS_COUNT, + }, + [BLK_IDX_GENERAL_PARAMS] = { + .packing = sja1105pqrs_general_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_general_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + }, + [BLK_IDX_XMII_PARAMS] = { + .packing = sja1105_xmii_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_xmii_params_entry), + .packed_entry_size = SJA1105_SIZE_XMII_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT, + }, +}; + +/* SJA1105R: Second generation, no TTEthernet, SGMII */ +struct sja1105_table_ops sja1105r_table_ops[BLK_IDX_MAX] = { + [BLK_IDX_L2_LOOKUP] = { + .packing = sja1105pqrs_l2_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_entry), + .packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, + }, + [BLK_IDX_L2_POLICING] = { + .packing = sja1105_l2_policing_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_policing_entry), + .packed_entry_size = SJA1105_SIZE_L2_POLICING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_POLICING_COUNT, + }, + [BLK_IDX_VLAN_LOOKUP] = { + .packing = sja1105_vlan_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vlan_lookup_entry), + .packed_entry_size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + }, + [BLK_IDX_L2_FORWARDING] = { + .packing = sja1105_l2_forwarding_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, + }, + [BLK_IDX_MAC_CONFIG] = { + .packing = sja1105pqrs_mac_config_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_mac_config_entry), + .packed_entry_size = SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY, + .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, + }, + [BLK_IDX_L2_LOOKUP_PARAMS] = { + .packing = sja1105pqrs_l2_lookup_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = { + .packing = sja1105_l2_forwarding_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_params_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT, + }, + [BLK_IDX_AVB_PARAMS] = { + .packing = sja1105pqrs_avb_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_avb_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_AVB_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_AVB_PARAMS_COUNT, + }, + [BLK_IDX_GENERAL_PARAMS] = { + .packing = sja1105pqrs_general_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_general_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + }, + [BLK_IDX_XMII_PARAMS] = { + .packing = sja1105_xmii_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_xmii_params_entry), + .packed_entry_size = SJA1105_SIZE_XMII_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT, + }, +}; + +/* SJA1105S: Second generation, TTEthernet, SGMII */ +struct sja1105_table_ops sja1105s_table_ops[BLK_IDX_MAX] = { + [BLK_IDX_L2_LOOKUP] = { + .packing = sja1105pqrs_l2_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_entry), + .packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, + }, + [BLK_IDX_L2_POLICING] = { + .packing = sja1105_l2_policing_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_policing_entry), + .packed_entry_size = SJA1105_SIZE_L2_POLICING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_POLICING_COUNT, + }, + [BLK_IDX_VLAN_LOOKUP] = { + .packing = sja1105_vlan_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vlan_lookup_entry), + .packed_entry_size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + }, + [BLK_IDX_L2_FORWARDING] = { + .packing = sja1105_l2_forwarding_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, + }, + [BLK_IDX_MAC_CONFIG] = { + .packing = sja1105pqrs_mac_config_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_mac_config_entry), + .packed_entry_size = SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY, + .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, + }, + [BLK_IDX_L2_LOOKUP_PARAMS] = { + .packing = sja1105pqrs_l2_lookup_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = { + .packing = sja1105_l2_forwarding_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_params_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT, + }, + [BLK_IDX_AVB_PARAMS] = { + .packing = sja1105pqrs_avb_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_avb_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_AVB_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_AVB_PARAMS_COUNT, + }, + [BLK_IDX_GENERAL_PARAMS] = { + .packing = sja1105pqrs_general_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_general_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + }, + [BLK_IDX_XMII_PARAMS] = { + .packing = sja1105_xmii_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_xmii_params_entry), + .packed_entry_size = SJA1105_SIZE_XMII_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT, + }, +}; + +int sja1105_static_config_init(struct sja1105_static_config *config, + const struct sja1105_table_ops *static_ops, + u64 device_id) +{ + enum sja1105_blk_idx i; + + *config = (struct sja1105_static_config) {0}; + + /* Transfer static_ops array from priv into per-table ops + * for handier access + */ + for (i = 0; i < BLK_IDX_MAX; i++) + config->tables[i].ops = &static_ops[i]; + + config->device_id = device_id; + return 0; +} + +void sja1105_static_config_free(struct sja1105_static_config *config) +{ + enum sja1105_blk_idx i; + + for (i = 0; i < BLK_IDX_MAX; i++) { + if (config->tables[i].entry_count) { + kfree(config->tables[i].entries); + config->tables[i].entry_count = 0; + } + } +} + +int sja1105_table_delete_entry(struct sja1105_table *table, int i) +{ + size_t entry_size = table->ops->unpacked_entry_size; + u8 *entries = table->entries; + + if (i > table->entry_count) + return -ERANGE; + + memmove(entries + i * entry_size, entries + (i + 1) * entry_size, + (table->entry_count - i) * entry_size); + + table->entry_count--; + + return 0; +} + +/* No pointers to table->entries should be kept when this is called. */ +int sja1105_table_resize(struct sja1105_table *table, size_t new_count) +{ + size_t entry_size = table->ops->unpacked_entry_size; + void *new_entries, *old_entries = table->entries; + + if (new_count > table->ops->max_entry_count) + return -ERANGE; + + new_entries = kcalloc(new_count, entry_size, GFP_KERNEL); + if (!new_entries) + return -ENOMEM; + + memcpy(new_entries, old_entries, min(new_count, table->entry_count) * + entry_size); + + table->entries = new_entries; + table->entry_count = new_count; + kfree(old_entries); + return 0; +} diff --git a/drivers/net/dsa/sja1105/sja1105_static_config.h b/drivers/net/dsa/sja1105/sja1105_static_config.h new file mode 100644 index 000000000000..684465fc0882 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_static_config.h @@ -0,0 +1,290 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright (c) 2016-2018, NXP Semiconductors + * Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com> + */ +#ifndef _SJA1105_STATIC_CONFIG_H +#define _SJA1105_STATIC_CONFIG_H + +#include <linux/packing.h> +#include <linux/types.h> +#include <asm/types.h> + +#define SJA1105_SIZE_DEVICE_ID 4 +#define SJA1105_SIZE_TABLE_HEADER 12 +#define SJA1105_SIZE_L2_POLICING_ENTRY 8 +#define SJA1105_SIZE_VLAN_LOOKUP_ENTRY 8 +#define SJA1105_SIZE_L2_FORWARDING_ENTRY 8 +#define SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY 12 +#define SJA1105_SIZE_XMII_PARAMS_ENTRY 4 +#define SJA1105ET_SIZE_L2_LOOKUP_ENTRY 12 +#define SJA1105ET_SIZE_MAC_CONFIG_ENTRY 28 +#define SJA1105ET_SIZE_L2_LOOKUP_PARAMS_ENTRY 4 +#define SJA1105ET_SIZE_GENERAL_PARAMS_ENTRY 40 +#define SJA1105ET_SIZE_AVB_PARAMS_ENTRY 12 +#define SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY 20 +#define SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY 32 +#define SJA1105PQRS_SIZE_L2_LOOKUP_PARAMS_ENTRY 16 +#define SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY 44 +#define SJA1105PQRS_SIZE_AVB_PARAMS_ENTRY 16 + +/* UM10944.pdf Page 11, Table 2. Configuration Blocks */ +enum { + BLKID_L2_LOOKUP = 0x05, + BLKID_L2_POLICING = 0x06, + BLKID_VLAN_LOOKUP = 0x07, + BLKID_L2_FORWARDING = 0x08, + BLKID_MAC_CONFIG = 0x09, + BLKID_L2_LOOKUP_PARAMS = 0x0D, + BLKID_L2_FORWARDING_PARAMS = 0x0E, + BLKID_AVB_PARAMS = 0x10, + BLKID_GENERAL_PARAMS = 0x11, + BLKID_XMII_PARAMS = 0x4E, +}; + +enum sja1105_blk_idx { + BLK_IDX_L2_LOOKUP = 0, + BLK_IDX_L2_POLICING, + BLK_IDX_VLAN_LOOKUP, + BLK_IDX_L2_FORWARDING, + BLK_IDX_MAC_CONFIG, + BLK_IDX_L2_LOOKUP_PARAMS, + BLK_IDX_L2_FORWARDING_PARAMS, + BLK_IDX_AVB_PARAMS, + BLK_IDX_GENERAL_PARAMS, + BLK_IDX_XMII_PARAMS, + BLK_IDX_MAX, + /* Fake block indices that are only valid for dynamic access */ + BLK_IDX_MGMT_ROUTE, + BLK_IDX_MAX_DYN, + BLK_IDX_INVAL = -1, +}; + +#define SJA1105_MAX_L2_LOOKUP_COUNT 1024 +#define SJA1105_MAX_L2_POLICING_COUNT 45 +#define SJA1105_MAX_VLAN_LOOKUP_COUNT 4096 +#define SJA1105_MAX_L2_FORWARDING_COUNT 13 +#define SJA1105_MAX_MAC_CONFIG_COUNT 5 +#define SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT 1 +#define SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT 1 +#define SJA1105_MAX_GENERAL_PARAMS_COUNT 1 +#define SJA1105_MAX_XMII_PARAMS_COUNT 1 +#define SJA1105_MAX_AVB_PARAMS_COUNT 1 + +#define SJA1105_MAX_FRAME_MEMORY 929 + +#define SJA1105E_DEVICE_ID 0x9C00000Cull +#define SJA1105T_DEVICE_ID 0x9E00030Eull +#define SJA1105PR_DEVICE_ID 0xAF00030Eull +#define SJA1105QS_DEVICE_ID 0xAE00030Eull + +#define SJA1105ET_PART_NO 0x9A83 +#define SJA1105P_PART_NO 0x9A84 +#define SJA1105Q_PART_NO 0x9A85 +#define SJA1105R_PART_NO 0x9A86 +#define SJA1105S_PART_NO 0x9A87 + +struct sja1105_general_params_entry { + u64 vllupformat; + u64 mirr_ptacu; + u64 switchid; + u64 hostprio; + u64 mac_fltres1; + u64 mac_fltres0; + u64 mac_flt1; + u64 mac_flt0; + u64 incl_srcpt1; + u64 incl_srcpt0; + u64 send_meta1; + u64 send_meta0; + u64 casc_port; + u64 host_port; + u64 mirr_port; + u64 vlmarker; + u64 vlmask; + u64 tpid; + u64 ignore2stf; + u64 tpid2; + /* P/Q/R/S only */ + u64 queue_ts; + u64 egrmirrvid; + u64 egrmirrpcp; + u64 egrmirrdei; + u64 replay_port; +}; + +struct sja1105_vlan_lookup_entry { + u64 ving_mirr; + u64 vegr_mirr; + u64 vmemb_port; + u64 vlan_bc; + u64 tag_port; + u64 vlanid; +}; + +struct sja1105_l2_lookup_entry { + u64 vlanid; + u64 macaddr; + u64 destports; + u64 enfport; + u64 index; + /* P/Q/R/S only */ + u64 mask_iotag; + u64 mask_vlanid; + u64 mask_macaddr; + u64 iotag; + u64 lockeds; + union { + /* LOCKEDS=1: Static FDB entries */ + struct { + u64 tsreg; + u64 mirrvlan; + u64 takets; + u64 mirr; + u64 retag; + }; + /* LOCKEDS=0: Dynamically learned FDB entries */ + struct { + u64 touched; + u64 age; + }; + }; +}; + +struct sja1105_l2_lookup_params_entry { + u64 maxaddrp[5]; /* P/Q/R/S only */ + u64 start_dynspc; /* P/Q/R/S only */ + u64 drpnolearn; /* P/Q/R/S only */ + u64 use_static; /* P/Q/R/S only */ + u64 owr_dyn; /* P/Q/R/S only */ + u64 learn_once; /* P/Q/R/S only */ + u64 maxage; /* Shared */ + u64 dyn_tbsz; /* E/T only */ + u64 poly; /* E/T only */ + u64 shared_learn; /* Shared */ + u64 no_enf_hostprt; /* Shared */ + u64 no_mgmt_learn; /* Shared */ +}; + +struct sja1105_l2_forwarding_entry { + u64 bc_domain; + u64 reach_port; + u64 fl_domain; + u64 vlan_pmap[8]; +}; + +struct sja1105_l2_forwarding_params_entry { + u64 max_dynp; + u64 part_spc[8]; +}; + +struct sja1105_l2_policing_entry { + u64 sharindx; + u64 smax; + u64 rate; + u64 maxlen; + u64 partition; +}; + +struct sja1105_avb_params_entry { + u64 destmeta; + u64 srcmeta; +}; + +struct sja1105_mac_config_entry { + u64 top[8]; + u64 base[8]; + u64 enabled[8]; + u64 ifg; + u64 speed; + u64 tp_delin; + u64 tp_delout; + u64 maxage; + u64 vlanprio; + u64 vlanid; + u64 ing_mirr; + u64 egr_mirr; + u64 drpnona664; + u64 drpdtag; + u64 drpuntag; + u64 retag; + u64 dyn_learn; + u64 egress; + u64 ingress; +}; + +struct sja1105_xmii_params_entry { + u64 phy_mac[5]; + u64 xmii_mode[5]; +}; + +struct sja1105_table_header { + u64 block_id; + u64 len; + u64 crc; +}; + +struct sja1105_table_ops { + size_t (*packing)(void *buf, void *entry_ptr, enum packing_op op); + size_t unpacked_entry_size; + size_t packed_entry_size; + size_t max_entry_count; +}; + +struct sja1105_table { + const struct sja1105_table_ops *ops; + size_t entry_count; + void *entries; +}; + +struct sja1105_static_config { + u64 device_id; + struct sja1105_table tables[BLK_IDX_MAX]; +}; + +extern struct sja1105_table_ops sja1105e_table_ops[BLK_IDX_MAX]; +extern struct sja1105_table_ops sja1105t_table_ops[BLK_IDX_MAX]; +extern struct sja1105_table_ops sja1105p_table_ops[BLK_IDX_MAX]; +extern struct sja1105_table_ops sja1105q_table_ops[BLK_IDX_MAX]; +extern struct sja1105_table_ops sja1105r_table_ops[BLK_IDX_MAX]; +extern struct sja1105_table_ops sja1105s_table_ops[BLK_IDX_MAX]; + +size_t sja1105_table_header_packing(void *buf, void *hdr, enum packing_op op); +void +sja1105_table_header_pack_with_crc(void *buf, struct sja1105_table_header *hdr); +size_t +sja1105_static_config_get_length(const struct sja1105_static_config *config); + +typedef enum { + SJA1105_CONFIG_OK = 0, + SJA1105_MISSING_L2_POLICING_TABLE, + SJA1105_MISSING_L2_FORWARDING_TABLE, + SJA1105_MISSING_L2_FORWARDING_PARAMS_TABLE, + SJA1105_MISSING_GENERAL_PARAMS_TABLE, + SJA1105_MISSING_VLAN_TABLE, + SJA1105_MISSING_XMII_TABLE, + SJA1105_MISSING_MAC_TABLE, + SJA1105_OVERCOMMITTED_FRAME_MEMORY, +} sja1105_config_valid_t; + +extern const char *sja1105_static_config_error_msg[]; + +sja1105_config_valid_t +sja1105_static_config_check_valid(const struct sja1105_static_config *config); +void +sja1105_static_config_pack(void *buf, struct sja1105_static_config *config); +int sja1105_static_config_init(struct sja1105_static_config *config, + const struct sja1105_table_ops *static_ops, + u64 device_id); +void sja1105_static_config_free(struct sja1105_static_config *config); + +int sja1105_table_delete_entry(struct sja1105_table *table, int i); +int sja1105_table_resize(struct sja1105_table *table, size_t new_count); + +u32 sja1105_crc32(const void *buf, size_t len); + +void sja1105_pack(void *buf, const u64 *val, int start, int end, size_t len); +void sja1105_unpack(const void *buf, u64 *val, int start, int end, size_t len); +void sja1105_packing(void *buf, u64 *val, int start, int end, + size_t len, enum packing_op op); + +#endif |