aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/dsa
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dsa')
-rw-r--r--drivers/net/dsa/Kconfig21
-rw-r--r--drivers/net/dsa/Makefile4
-rw-r--r--drivers/net/dsa/bcm_sf2.c887
-rw-r--r--drivers/net/dsa/bcm_sf2.h147
-rw-r--r--drivers/net/dsa/bcm_sf2_regs.h231
-rw-r--r--drivers/net/dsa/mv88e6060.c15
-rw-r--r--drivers/net/dsa/mv88e6123_61_65.c10
-rw-r--r--drivers/net/dsa/mv88e6131.c8
-rw-r--r--drivers/net/dsa/mv88e6171.c411
-rw-r--r--drivers/net/dsa/mv88e6xxx.c10
-rw-r--r--drivers/net/dsa/mv88e6xxx.h1
11 files changed, 1733 insertions, 12 deletions
diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
index b8fe808b7957..9234d808cbb3 100644
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -36,4 +36,25 @@ config NET_DSA_MV88E6123_61_65
This enables support for the Marvell 88E6123/6161/6165
ethernet switch chips.
+config NET_DSA_MV88E6171
+ tristate "Marvell 88E6171 ethernet switch chip support"
+ select NET_DSA
+ select NET_DSA_MV88E6XXX
+ select NET_DSA_TAG_EDSA
+ ---help---
+ This enables support for the Marvell 88E6171 ethernet switch
+ chip.
+
+config NET_DSA_BCM_SF2
+ tristate "Broadcom Starfighter 2 Ethernet switch support"
+ depends on HAS_IOMEM
+ select NET_DSA
+ select NET_DSA_TAG_BRCM
+ select FIXED_PHY if NET_DSA_BCM_SF2=y
+ select BCM7XXX_PHY
+ select MDIO_BCM_UNIMAC
+ ---help---
+ This enables support for the Broadcom Starfighter 2 Ethernet
+ switch chips.
+
endmenu
diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile
index f3bda05536cc..23a90de9830e 100644
--- a/drivers/net/dsa/Makefile
+++ b/drivers/net/dsa/Makefile
@@ -7,3 +7,7 @@ endif
ifdef CONFIG_NET_DSA_MV88E6131
mv88e6xxx_drv-y += mv88e6131.o
endif
+ifdef CONFIG_NET_DSA_MV88E6171
+mv88e6xxx_drv-y += mv88e6171.o
+endif
+obj-$(CONFIG_NET_DSA_BCM_SF2) += bcm_sf2.o
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
new file mode 100644
index 000000000000..b9625968daac
--- /dev/null
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -0,0 +1,887 @@
+/*
+ * Broadcom Starfighter 2 DSA switch driver
+ *
+ * Copyright (C) 2014, Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/phy.h>
+#include <linux/phy_fixed.h>
+#include <linux/mii.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <net/dsa.h>
+#include <linux/ethtool.h>
+
+#include "bcm_sf2.h"
+#include "bcm_sf2_regs.h"
+
+/* String, offset, and register size in bytes if different from 4 bytes */
+static const struct bcm_sf2_hw_stats bcm_sf2_mib[] = {
+ { "TxOctets", 0x000, 8 },
+ { "TxDropPkts", 0x020 },
+ { "TxQPKTQ0", 0x030 },
+ { "TxBroadcastPkts", 0x040 },
+ { "TxMulticastPkts", 0x050 },
+ { "TxUnicastPKts", 0x060 },
+ { "TxCollisions", 0x070 },
+ { "TxSingleCollision", 0x080 },
+ { "TxMultipleCollision", 0x090 },
+ { "TxDeferredCollision", 0x0a0 },
+ { "TxLateCollision", 0x0b0 },
+ { "TxExcessiveCollision", 0x0c0 },
+ { "TxFrameInDisc", 0x0d0 },
+ { "TxPausePkts", 0x0e0 },
+ { "TxQPKTQ1", 0x0f0 },
+ { "TxQPKTQ2", 0x100 },
+ { "TxQPKTQ3", 0x110 },
+ { "TxQPKTQ4", 0x120 },
+ { "TxQPKTQ5", 0x130 },
+ { "RxOctets", 0x140, 8 },
+ { "RxUndersizePkts", 0x160 },
+ { "RxPausePkts", 0x170 },
+ { "RxPkts64Octets", 0x180 },
+ { "RxPkts65to127Octets", 0x190 },
+ { "RxPkts128to255Octets", 0x1a0 },
+ { "RxPkts256to511Octets", 0x1b0 },
+ { "RxPkts512to1023Octets", 0x1c0 },
+ { "RxPkts1024toMaxPktsOctets", 0x1d0 },
+ { "RxOversizePkts", 0x1e0 },
+ { "RxJabbers", 0x1f0 },
+ { "RxAlignmentErrors", 0x200 },
+ { "RxFCSErrors", 0x210 },
+ { "RxGoodOctets", 0x220, 8 },
+ { "RxDropPkts", 0x240 },
+ { "RxUnicastPkts", 0x250 },
+ { "RxMulticastPkts", 0x260 },
+ { "RxBroadcastPkts", 0x270 },
+ { "RxSAChanges", 0x280 },
+ { "RxFragments", 0x290 },
+ { "RxJumboPkt", 0x2a0 },
+ { "RxSymblErr", 0x2b0 },
+ { "InRangeErrCount", 0x2c0 },
+ { "OutRangeErrCount", 0x2d0 },
+ { "EEELpiEvent", 0x2e0 },
+ { "EEELpiDuration", 0x2f0 },
+ { "RxDiscard", 0x300, 8 },
+ { "TxQPKTQ6", 0x320 },
+ { "TxQPKTQ7", 0x330 },
+ { "TxPkts64Octets", 0x340 },
+ { "TxPkts65to127Octets", 0x350 },
+ { "TxPkts128to255Octets", 0x360 },
+ { "TxPkts256to511Ocets", 0x370 },
+ { "TxPkts512to1023Ocets", 0x380 },
+ { "TxPkts1024toMaxPktOcets", 0x390 },
+};
+
+#define BCM_SF2_STATS_SIZE ARRAY_SIZE(bcm_sf2_mib)
+
+static void bcm_sf2_sw_get_strings(struct dsa_switch *ds,
+ int port, uint8_t *data)
+{
+ unsigned int i;
+
+ for (i = 0; i < BCM_SF2_STATS_SIZE; i++)
+ memcpy(data + i * ETH_GSTRING_LEN,
+ bcm_sf2_mib[i].string, ETH_GSTRING_LEN);
+}
+
+static void bcm_sf2_sw_get_ethtool_stats(struct dsa_switch *ds,
+ int port, uint64_t *data)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ const struct bcm_sf2_hw_stats *s;
+ unsigned int i;
+ u64 val = 0;
+ u32 offset;
+
+ mutex_lock(&priv->stats_mutex);
+
+ /* Now fetch the per-port counters */
+ for (i = 0; i < BCM_SF2_STATS_SIZE; i++) {
+ s = &bcm_sf2_mib[i];
+
+ /* Do a latched 64-bit read if needed */
+ offset = s->reg + CORE_P_MIB_OFFSET(port);
+ if (s->sizeof_stat == 8)
+ val = core_readq(priv, offset);
+ else
+ val = core_readl(priv, offset);
+
+ data[i] = (u64)val;
+ }
+
+ mutex_unlock(&priv->stats_mutex);
+}
+
+static int bcm_sf2_sw_get_sset_count(struct dsa_switch *ds)
+{
+ return BCM_SF2_STATS_SIZE;
+}
+
+static char *bcm_sf2_sw_probe(struct device *host_dev, int sw_addr)
+{
+ return "Broadcom Starfighter 2";
+}
+
+static void bcm_sf2_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ unsigned int i;
+ u32 reg;
+
+ /* Enable the IMP Port to be in the same VLAN as the other ports
+ * on a per-port basis such that we only have Port i and IMP in
+ * the same VLAN.
+ */
+ for (i = 0; i < priv->hw_params.num_ports; i++) {
+ if (!((1 << i) & ds->phys_port_mask))
+ continue;
+
+ reg = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(i));
+ reg |= (1 << cpu_port);
+ core_writel(priv, reg, CORE_PORT_VLAN_CTL_PORT(i));
+ }
+}
+
+static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ u32 reg, val;
+
+ /* Enable the port memories */
+ reg = core_readl(priv, CORE_MEM_PSM_VDD_CTRL);
+ reg &= ~P_TXQ_PSM_VDD(port);
+ core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL);
+
+ /* Enable Broadcast, Multicast, Unicast forwarding to IMP port */
+ reg = core_readl(priv, CORE_IMP_CTL);
+ reg |= (RX_BCST_EN | RX_MCST_EN | RX_UCST_EN);
+ reg &= ~(RX_DIS | TX_DIS);
+ core_writel(priv, reg, CORE_IMP_CTL);
+
+ /* Enable forwarding */
+ core_writel(priv, SW_FWDG_EN, CORE_SWMODE);
+
+ /* Enable IMP port in dumb mode */
+ reg = core_readl(priv, CORE_SWITCH_CTRL);
+ reg |= MII_DUMB_FWDG_EN;
+ core_writel(priv, reg, CORE_SWITCH_CTRL);
+
+ /* Resolve which bit controls the Broadcom tag */
+ switch (port) {
+ case 8:
+ val = BRCM_HDR_EN_P8;
+ break;
+ case 7:
+ val = BRCM_HDR_EN_P7;
+ break;
+ case 5:
+ val = BRCM_HDR_EN_P5;
+ break;
+ default:
+ val = 0;
+ break;
+ }
+
+ /* Enable Broadcom tags for IMP port */
+ reg = core_readl(priv, CORE_BRCM_HDR_CTRL);
+ reg |= val;
+ core_writel(priv, reg, CORE_BRCM_HDR_CTRL);
+
+ /* Enable reception Broadcom tag for CPU TX (switch RX) to
+ * allow us to tag outgoing frames
+ */
+ reg = core_readl(priv, CORE_BRCM_HDR_RX_DIS);
+ reg &= ~(1 << port);
+ core_writel(priv, reg, CORE_BRCM_HDR_RX_DIS);
+
+ /* Enable transmission of Broadcom tags from the switch (CPU RX) to
+ * allow delivering frames to the per-port net_devices
+ */
+ reg = core_readl(priv, CORE_BRCM_HDR_TX_DIS);
+ reg &= ~(1 << port);
+ core_writel(priv, reg, CORE_BRCM_HDR_TX_DIS);
+
+ /* Force link status for IMP port */
+ reg = core_readl(priv, CORE_STS_OVERRIDE_IMP);
+ reg |= (MII_SW_OR | LINK_STS);
+ core_writel(priv, reg, CORE_STS_OVERRIDE_IMP);
+}
+
+static void bcm_sf2_eee_enable_set(struct dsa_switch *ds, int port, bool enable)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ u32 reg;
+
+ reg = core_readl(priv, CORE_EEE_EN_CTRL);
+ if (enable)
+ reg |= 1 << port;
+ else
+ reg &= ~(1 << port);
+ core_writel(priv, reg, CORE_EEE_EN_CTRL);
+}
+
+static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
+ struct phy_device *phy)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ s8 cpu_port = ds->dst[ds->index].cpu_port;
+ u32 reg;
+
+ /* Clear the memory power down */
+ reg = core_readl(priv, CORE_MEM_PSM_VDD_CTRL);
+ reg &= ~P_TXQ_PSM_VDD(port);
+ core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL);
+
+ /* Clear the Rx and Tx disable bits and set to no spanning tree */
+ core_writel(priv, 0, CORE_G_PCTL_PORT(port));
+
+ /* Enable port 7 interrupts to get notified */
+ if (port == 7)
+ intrl2_1_mask_clear(priv, P_IRQ_MASK(P7_IRQ_OFF));
+
+ /* Set this port, and only this one to be in the default VLAN */
+ reg = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(port));
+ reg &= ~PORT_VLAN_CTRL_MASK;
+ reg |= (1 << port);
+ core_writel(priv, reg, CORE_PORT_VLAN_CTL_PORT(port));
+
+ bcm_sf2_imp_vlan_setup(ds, cpu_port);
+
+ /* If EEE was enabled, restore it */
+ if (priv->port_sts[port].eee.eee_enabled)
+ bcm_sf2_eee_enable_set(ds, port, true);
+
+ return 0;
+}
+
+static void bcm_sf2_port_disable(struct dsa_switch *ds, int port,
+ struct phy_device *phy)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ u32 off, reg;
+
+ if (priv->wol_ports_mask & (1 << port))
+ return;
+
+ if (port == 7) {
+ intrl2_1_mask_set(priv, P_IRQ_MASK(P7_IRQ_OFF));
+ intrl2_1_writel(priv, P_IRQ_MASK(P7_IRQ_OFF), INTRL2_CPU_CLEAR);
+ }
+
+ if (dsa_is_cpu_port(ds, port))
+ off = CORE_IMP_CTL;
+ else
+ off = CORE_G_PCTL_PORT(port);
+
+ reg = core_readl(priv, off);
+ reg |= RX_DIS | TX_DIS;
+ core_writel(priv, reg, off);
+
+ /* Power down the port memory */
+ reg = core_readl(priv, CORE_MEM_PSM_VDD_CTRL);
+ reg |= P_TXQ_PSM_VDD(port);
+ core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL);
+}
+
+/* Returns 0 if EEE was not enabled, or 1 otherwise
+ */
+static int bcm_sf2_eee_init(struct dsa_switch *ds, int port,
+ struct phy_device *phy)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ struct ethtool_eee *p = &priv->port_sts[port].eee;
+ int ret;
+
+ p->supported = (SUPPORTED_1000baseT_Full | SUPPORTED_100baseT_Full);
+
+ ret = phy_init_eee(phy, 0);
+ if (ret)
+ return 0;
+
+ bcm_sf2_eee_enable_set(ds, port, true);
+
+ return 1;
+}
+
+static int bcm_sf2_sw_get_eee(struct dsa_switch *ds, int port,
+ struct ethtool_eee *e)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ struct ethtool_eee *p = &priv->port_sts[port].eee;
+ u32 reg;
+
+ reg = core_readl(priv, CORE_EEE_LPI_INDICATE);
+ e->eee_enabled = p->eee_enabled;
+ e->eee_active = !!(reg & (1 << port));
+
+ return 0;
+}
+
+static int bcm_sf2_sw_set_eee(struct dsa_switch *ds, int port,
+ struct phy_device *phydev,
+ struct ethtool_eee *e)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ struct ethtool_eee *p = &priv->port_sts[port].eee;
+
+ p->eee_enabled = e->eee_enabled;
+
+ if (!p->eee_enabled) {
+ bcm_sf2_eee_enable_set(ds, port, false);
+ } else {
+ p->eee_enabled = bcm_sf2_eee_init(ds, port, phydev);
+ if (!p->eee_enabled)
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
+static irqreturn_t bcm_sf2_switch_0_isr(int irq, void *dev_id)
+{
+ struct bcm_sf2_priv *priv = dev_id;
+
+ priv->irq0_stat = intrl2_0_readl(priv, INTRL2_CPU_STATUS) &
+ ~priv->irq0_mask;
+ intrl2_0_writel(priv, priv->irq0_stat, INTRL2_CPU_CLEAR);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t bcm_sf2_switch_1_isr(int irq, void *dev_id)
+{
+ struct bcm_sf2_priv *priv = dev_id;
+
+ priv->irq1_stat = intrl2_1_readl(priv, INTRL2_CPU_STATUS) &
+ ~priv->irq1_mask;
+ intrl2_1_writel(priv, priv->irq1_stat, INTRL2_CPU_CLEAR);
+
+ if (priv->irq1_stat & P_LINK_UP_IRQ(P7_IRQ_OFF))
+ priv->port_sts[7].link = 1;
+ if (priv->irq1_stat & P_LINK_DOWN_IRQ(P7_IRQ_OFF))
+ priv->port_sts[7].link = 0;
+
+ return IRQ_HANDLED;
+}
+
+static int bcm_sf2_sw_setup(struct dsa_switch *ds)
+{
+ const char *reg_names[BCM_SF2_REGS_NUM] = BCM_SF2_REGS_NAME;
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ struct device_node *dn;
+ void __iomem **base;
+ unsigned int port;
+ unsigned int i;
+ u32 reg, rev;
+ int ret;
+
+ spin_lock_init(&priv->indir_lock);
+ mutex_init(&priv->stats_mutex);
+
+ /* All the interesting properties are at the parent device_node
+ * level
+ */
+ dn = ds->pd->of_node->parent;
+
+ priv->irq0 = irq_of_parse_and_map(dn, 0);
+ priv->irq1 = irq_of_parse_and_map(dn, 1);
+
+ base = &priv->core;
+ for (i = 0; i < BCM_SF2_REGS_NUM; i++) {
+ *base = of_iomap(dn, i);
+ if (*base == NULL) {
+ pr_err("unable to find register: %s\n", reg_names[i]);
+ return -ENODEV;
+ }
+ base++;
+ }
+
+ /* Disable all interrupts and request them */
+ intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET);
+ intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR);
+ intrl2_0_writel(priv, 0, INTRL2_CPU_MASK_CLEAR);
+ intrl2_1_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET);
+ intrl2_1_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR);
+ intrl2_1_writel(priv, 0, INTRL2_CPU_MASK_CLEAR);
+
+ ret = request_irq(priv->irq0, bcm_sf2_switch_0_isr, 0,
+ "switch_0", priv);
+ if (ret < 0) {
+ pr_err("failed to request switch_0 IRQ\n");
+ goto out_unmap;
+ }
+
+ ret = request_irq(priv->irq1, bcm_sf2_switch_1_isr, 0,
+ "switch_1", priv);
+ if (ret < 0) {
+ pr_err("failed to request switch_1 IRQ\n");
+ goto out_free_irq0;
+ }
+
+ /* Reset the MIB counters */
+ reg = core_readl(priv, CORE_GMNCFGCFG);
+ reg |= RST_MIB_CNT;
+ core_writel(priv, reg, CORE_GMNCFGCFG);
+ reg &= ~RST_MIB_CNT;
+ core_writel(priv, reg, CORE_GMNCFGCFG);
+
+ /* Get the maximum number of ports for this switch */
+ priv->hw_params.num_ports = core_readl(priv, CORE_IMP0_PRT_ID) + 1;
+ if (priv->hw_params.num_ports > DSA_MAX_PORTS)
+ priv->hw_params.num_ports = DSA_MAX_PORTS;
+
+ /* Assume a single GPHY setup if we can't read that property */
+ if (of_property_read_u32(dn, "brcm,num-gphy",
+ &priv->hw_params.num_gphy))
+ priv->hw_params.num_gphy = 1;
+
+ /* Enable all valid ports and disable those unused */
+ for (port = 0; port < priv->hw_params.num_ports; port++) {
+ /* IMP port receives special treatment */
+ if ((1 << port) & ds->phys_port_mask)
+ bcm_sf2_port_setup(ds, port, NULL);
+ else if (dsa_is_cpu_port(ds, port))
+ bcm_sf2_imp_setup(ds, port);
+ else
+ bcm_sf2_port_disable(ds, port, NULL);
+ }
+
+ /* Include the pseudo-PHY address and the broadcast PHY address to
+ * divert reads towards our workaround
+ */
+ ds->phys_mii_mask |= ((1 << 30) | (1 << 0));
+
+ rev = reg_readl(priv, REG_SWITCH_REVISION);
+ priv->hw_params.top_rev = (rev >> SWITCH_TOP_REV_SHIFT) &
+ SWITCH_TOP_REV_MASK;
+ priv->hw_params.core_rev = (rev & SF2_REV_MASK);
+
+ rev = reg_readl(priv, REG_PHY_REVISION);
+ priv->hw_params.gphy_rev = rev & PHY_REVISION_MASK;
+
+ pr_info("Starfighter 2 top: %x.%02x, core: %x.%02x base: 0x%p, IRQs: %d, %d\n",
+ priv->hw_params.top_rev >> 8, priv->hw_params.top_rev & 0xff,
+ priv->hw_params.core_rev >> 8, priv->hw_params.core_rev & 0xff,
+ priv->core, priv->irq0, priv->irq1);
+
+ return 0;
+
+out_free_irq0:
+ free_irq(priv->irq0, priv);
+out_unmap:
+ base = &priv->core;
+ for (i = 0; i < BCM_SF2_REGS_NUM; i++) {
+ iounmap(*base);
+ base++;
+ }
+ return ret;
+}
+
+static int bcm_sf2_sw_set_addr(struct dsa_switch *ds, u8 *addr)
+{
+ return 0;
+}
+
+static u32 bcm_sf2_sw_get_phy_flags(struct dsa_switch *ds, int port)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+
+ /* The BCM7xxx PHY driver expects to find the integrated PHY revision
+ * in bits 15:8 and the patch level in bits 7:0 which is exactly what
+ * the REG_PHY_REVISION register layout is.
+ */
+
+ return priv->hw_params.gphy_rev;
+}
+
+static int bcm_sf2_sw_indir_rw(struct dsa_switch *ds, int op, int addr,
+ int regnum, u16 val)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ int ret = 0;
+ u32 reg;
+
+ reg = reg_readl(priv, REG_SWITCH_CNTRL);
+ reg |= MDIO_MASTER_SEL;
+ reg_writel(priv, reg, REG_SWITCH_CNTRL);
+
+ /* Page << 8 | offset */
+ reg = 0x70;
+ reg <<= 2;
+ core_writel(priv, addr, reg);
+
+ /* Page << 8 | offset */
+ reg = 0x80 << 8 | regnum << 1;
+ reg <<= 2;
+
+ if (op)
+ ret = core_readl(priv, reg);
+ else
+ core_writel(priv, val, reg);
+
+ reg = reg_readl(priv, REG_SWITCH_CNTRL);
+ reg &= ~MDIO_MASTER_SEL;
+ reg_writel(priv, reg, REG_SWITCH_CNTRL);
+
+ return ret & 0xffff;
+}
+
+static int bcm_sf2_sw_phy_read(struct dsa_switch *ds, int addr, int regnum)
+{
+ /* Intercept reads from the MDIO broadcast address or Broadcom
+ * pseudo-PHY address
+ */
+ switch (addr) {
+ case 0:
+ case 30:
+ return bcm_sf2_sw_indir_rw(ds, 1, addr, regnum, 0);
+ default:
+ return 0xffff;
+ }
+}
+
+static int bcm_sf2_sw_phy_write(struct dsa_switch *ds, int addr, int regnum,
+ u16 val)
+{
+ /* Intercept writes to the MDIO broadcast address or Broadcom
+ * pseudo-PHY address
+ */
+ switch (addr) {
+ case 0:
+ case 30:
+ bcm_sf2_sw_indir_rw(ds, 0, addr, regnum, val);
+ break;
+ }
+
+ return 0;
+}
+
+static void bcm_sf2_sw_adjust_link(struct dsa_switch *ds, int port,
+ struct phy_device *phydev)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ u32 id_mode_dis = 0, port_mode;
+ const char *str = NULL;
+ u32 reg;
+
+ switch (phydev->interface) {
+ case PHY_INTERFACE_MODE_RGMII:
+ str = "RGMII (no delay)";
+ id_mode_dis = 1;
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ if (!str)
+ str = "RGMII (TX delay)";
+ port_mode = EXT_GPHY;
+ break;
+ case PHY_INTERFACE_MODE_MII:
+ str = "MII";
+ port_mode = EXT_EPHY;
+ break;
+ case PHY_INTERFACE_MODE_REVMII:
+ str = "Reverse MII";
+ port_mode = EXT_REVMII;
+ break;
+ default:
+ /* All other PHYs: internal and MoCA */
+ goto force_link;
+ }
+
+ /* If the link is down, just disable the interface to conserve power */
+ if (!phydev->link) {
+ reg = reg_readl(priv, REG_RGMII_CNTRL_P(port));
+ reg &= ~RGMII_MODE_EN;
+ reg_writel(priv, reg, REG_RGMII_CNTRL_P(port));
+ goto force_link;
+ }
+
+ /* Clear id_mode_dis bit, and the existing port mode, but
+ * make sure we enable the RGMII block for data to pass
+ */
+ reg = reg_readl(priv, REG_RGMII_CNTRL_P(port));
+ reg &= ~ID_MODE_DIS;
+ reg &= ~(PORT_MODE_MASK << PORT_MODE_SHIFT);
+ reg &= ~(RX_PAUSE_EN | TX_PAUSE_EN);
+
+ reg |= port_mode | RGMII_MODE_EN;
+ if (id_mode_dis)
+ reg |= ID_MODE_DIS;
+
+ if (phydev->pause) {
+ if (phydev->asym_pause)
+ reg |= TX_PAUSE_EN;
+ reg |= RX_PAUSE_EN;
+ }
+
+ reg_writel(priv, reg, REG_RGMII_CNTRL_P(port));
+
+ pr_info("Port %d configured for %s\n", port, str);
+
+force_link:
+ /* Force link settings detected from the PHY */
+ reg = SW_OVERRIDE;
+ switch (phydev->speed) {
+ case SPEED_1000:
+ reg |= SPDSTS_1000 << SPEED_SHIFT;
+ break;
+ case SPEED_100:
+ reg |= SPDSTS_100 << SPEED_SHIFT;
+ break;
+ }
+
+ if (phydev->link)
+ reg |= LINK_STS;
+ if (phydev->duplex == DUPLEX_FULL)
+ reg |= DUPLX_MODE;
+
+ core_writel(priv, reg, CORE_STS_OVERRIDE_GMIIP_PORT(port));
+}
+
+static void bcm_sf2_sw_fixed_link_update(struct dsa_switch *ds, int port,
+ struct fixed_phy_status *status)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ u32 link, duplex, pause, speed;
+ u32 reg;
+
+ link = core_readl(priv, CORE_LNKSTS);
+ duplex = core_readl(priv, CORE_DUPSTS);
+ pause = core_readl(priv, CORE_PAUSESTS);
+ speed = core_readl(priv, CORE_SPDSTS);
+
+ speed >>= (port * SPDSTS_SHIFT);
+ speed &= SPDSTS_MASK;
+
+ status->link = 0;
+
+ /* Port 7 is special as we do not get link status from CORE_LNKSTS,
+ * which means that we need to force the link at the port override
+ * level to get the data to flow. We do use what the interrupt handler
+ * did determine before.
+ */
+ if (port == 7) {
+ status->link = priv->port_sts[port].link;
+ reg = core_readl(priv, CORE_STS_OVERRIDE_GMIIP_PORT(7));
+ reg |= SW_OVERRIDE;
+ if (status->link)
+ reg |= LINK_STS;
+ else
+ reg &= ~LINK_STS;
+ core_writel(priv, reg, CORE_STS_OVERRIDE_GMIIP_PORT(7));
+ status->duplex = 1;
+ } else {
+ status->link = !!(link & (1 << port));
+ status->duplex = !!(duplex & (1 << port));
+ }
+
+ switch (speed) {
+ case SPDSTS_10:
+ status->speed = SPEED_10;
+ break;
+ case SPDSTS_100:
+ status->speed = SPEED_100;
+ break;
+ case SPDSTS_1000:
+ status->speed = SPEED_1000;
+ break;
+ }
+
+ if ((pause & (1 << port)) &&
+ (pause & (1 << (port + PAUSESTS_TX_PAUSE_SHIFT)))) {
+ status->asym_pause = 1;
+ status->pause = 1;
+ }
+
+ if (pause & (1 << port))
+ status->pause = 1;
+}
+
+static int bcm_sf2_sw_suspend(struct dsa_switch *ds)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ unsigned int port;
+
+ intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET);
+ intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR);
+ intrl2_0_writel(priv, 0, INTRL2_CPU_MASK_CLEAR);
+ intrl2_1_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET);
+ intrl2_1_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR);
+ intrl2_1_writel(priv, 0, INTRL2_CPU_MASK_CLEAR);
+
+ /* Disable all ports physically present including the IMP
+ * port, the other ones have already been disabled during
+ * bcm_sf2_sw_setup
+ */
+ for (port = 0; port < DSA_MAX_PORTS; port++) {
+ if ((1 << port) & ds->phys_port_mask ||
+ dsa_is_cpu_port(ds, port))
+ bcm_sf2_port_disable(ds, port, NULL);
+ }
+
+ return 0;
+}
+
+static int bcm_sf2_sw_rst(struct bcm_sf2_priv *priv)
+{
+ unsigned int timeout = 1000;
+ u32 reg;
+
+ reg = core_readl(priv, CORE_WATCHDOG_CTRL);
+ reg |= SOFTWARE_RESET | EN_CHIP_RST | EN_SW_RESET;
+ core_writel(priv, reg, CORE_WATCHDOG_CTRL);
+
+ do {
+ reg = core_readl(priv, CORE_WATCHDOG_CTRL);
+ if (!(reg & SOFTWARE_RESET))
+ break;
+
+ usleep_range(1000, 2000);
+ } while (timeout-- > 0);
+
+ if (timeout == 0)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int bcm_sf2_sw_resume(struct dsa_switch *ds)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ unsigned int port;
+ u32 reg;
+ int ret;
+
+ ret = bcm_sf2_sw_rst(priv);
+ if (ret) {
+ pr_err("%s: failed to software reset switch\n", __func__);
+ return ret;
+ }
+
+ /* Reinitialize the single GPHY */
+ if (priv->hw_params.num_gphy == 1) {
+ reg = reg_readl(priv, REG_SPHY_CNTRL);
+ reg |= PHY_RESET;
+ reg &= ~(EXT_PWR_DOWN | IDDQ_BIAS);
+ reg_writel(priv, reg, REG_SPHY_CNTRL);
+ udelay(21);
+ reg = reg_readl(priv, REG_SPHY_CNTRL);
+ reg &= ~PHY_RESET;
+ reg_writel(priv, reg, REG_SPHY_CNTRL);
+ }
+
+ for (port = 0; port < DSA_MAX_PORTS; port++) {
+ if ((1 << port) & ds->phys_port_mask)
+ bcm_sf2_port_setup(ds, port, NULL);
+ else if (dsa_is_cpu_port(ds, port))
+ bcm_sf2_imp_setup(ds, port);
+ }
+
+ return 0;
+}
+
+static void bcm_sf2_sw_get_wol(struct dsa_switch *ds, int port,
+ struct ethtool_wolinfo *wol)
+{
+ struct net_device *p = ds->dst[ds->index].master_netdev;
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ struct ethtool_wolinfo pwol;
+
+ /* Get the parent device WoL settings */
+ p->ethtool_ops->get_wol(p, &pwol);
+
+ /* Advertise the parent device supported settings */
+ wol->supported = pwol.supported;
+ memset(&wol->sopass, 0, sizeof(wol->sopass));
+
+ if (pwol.wolopts & WAKE_MAGICSECURE)
+ memcpy(&wol->sopass, pwol.sopass, sizeof(wol->sopass));
+
+ if (priv->wol_ports_mask & (1 << port))
+ wol->wolopts = pwol.wolopts;
+ else
+ wol->wolopts = 0;
+}
+
+static int bcm_sf2_sw_set_wol(struct dsa_switch *ds, int port,
+ struct ethtool_wolinfo *wol)
+{
+ struct net_device *p = ds->dst[ds->index].master_netdev;
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ s8 cpu_port = ds->dst[ds->index].cpu_port;
+ struct ethtool_wolinfo pwol;
+
+ p->ethtool_ops->get_wol(p, &pwol);
+ if (wol->wolopts & ~pwol.supported)
+ return -EINVAL;
+
+ if (wol->wolopts)
+ priv->wol_ports_mask |= (1 << port);
+ else
+ priv->wol_ports_mask &= ~(1 << port);
+
+ /* If we have at least one port enabled, make sure the CPU port
+ * is also enabled. If the CPU port is the last one enabled, we disable
+ * it since this configuration does not make sense.
+ */
+ if (priv->wol_ports_mask && priv->wol_ports_mask != (1 << cpu_port))
+ priv->wol_ports_mask |= (1 << cpu_port);
+ else
+ priv->wol_ports_mask &= ~(1 << cpu_port);
+
+ return p->ethtool_ops->set_wol(p, wol);
+}
+
+static struct dsa_switch_driver bcm_sf2_switch_driver = {
+ .tag_protocol = DSA_TAG_PROTO_BRCM,
+ .priv_size = sizeof(struct bcm_sf2_priv),
+ .probe = bcm_sf2_sw_probe,
+ .setup = bcm_sf2_sw_setup,
+ .set_addr = bcm_sf2_sw_set_addr,
+ .get_phy_flags = bcm_sf2_sw_get_phy_flags,
+ .phy_read = bcm_sf2_sw_phy_read,
+ .phy_write = bcm_sf2_sw_phy_write,
+ .get_strings = bcm_sf2_sw_get_strings,
+ .get_ethtool_stats = bcm_sf2_sw_get_ethtool_stats,
+ .get_sset_count = bcm_sf2_sw_get_sset_count,
+ .adjust_link = bcm_sf2_sw_adjust_link,
+ .fixed_link_update = bcm_sf2_sw_fixed_link_update,
+ .suspend = bcm_sf2_sw_suspend,
+ .resume = bcm_sf2_sw_resume,
+ .get_wol = bcm_sf2_sw_get_wol,
+ .set_wol = bcm_sf2_sw_set_wol,
+ .port_enable = bcm_sf2_port_setup,
+ .port_disable = bcm_sf2_port_disable,
+ .get_eee = bcm_sf2_sw_get_eee,
+ .set_eee = bcm_sf2_sw_set_eee,
+};
+
+static int __init bcm_sf2_init(void)
+{
+ register_switch_driver(&bcm_sf2_switch_driver);
+
+ return 0;
+}
+module_init(bcm_sf2_init);
+
+static void __exit bcm_sf2_exit(void)
+{
+ unregister_switch_driver(&bcm_sf2_switch_driver);
+}
+module_exit(bcm_sf2_exit);
+
+MODULE_AUTHOR("Broadcom Corporation");
+MODULE_DESCRIPTION("Driver for Broadcom Starfighter 2 ethernet switch chip");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:brcm-sf2");
diff --git a/drivers/net/dsa/bcm_sf2.h b/drivers/net/dsa/bcm_sf2.h
new file mode 100644
index 000000000000..ee9f650d5026
--- /dev/null
+++ b/drivers/net/dsa/bcm_sf2.h
@@ -0,0 +1,147 @@
+/*
+ * Broadcom Starfighter2 private context
+ *
+ * Copyright (C) 2014, Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __BCM_SF2_H
+#define __BCM_SF2_H
+
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+
+#include <net/dsa.h>
+
+#include "bcm_sf2_regs.h"
+
+struct bcm_sf2_hw_params {
+ u16 top_rev;
+ u16 core_rev;
+ u16 gphy_rev;
+ u32 num_gphy;
+ u8 num_acb_queue;
+ u8 num_rgmii;
+ u8 num_ports;
+ u8 fcb_pause_override:1;
+ u8 acb_packets_inflight:1;
+};
+
+#define BCM_SF2_REGS_NAME {\
+ "core", "reg", "intrl2_0", "intrl2_1", "fcb", "acb" \
+}
+
+#define BCM_SF2_REGS_NUM 6
+
+struct bcm_sf2_port_status {
+ unsigned int link;
+
+ struct ethtool_eee eee;
+};
+
+struct bcm_sf2_priv {
+ /* Base registers, keep those in order with BCM_SF2_REGS_NAME */
+ void __iomem *core;
+ void __iomem *reg;
+ void __iomem *intrl2_0;
+ void __iomem *intrl2_1;
+ void __iomem *fcb;
+ void __iomem *acb;
+
+ /* spinlock protecting access to the indirect registers */
+ spinlock_t indir_lock;
+
+ int irq0;
+ int irq1;
+ u32 irq0_stat;
+ u32 irq0_mask;
+ u32 irq1_stat;
+ u32 irq1_mask;
+
+ /* Mutex protecting access to the MIB counters */
+ struct mutex stats_mutex;
+
+ struct bcm_sf2_hw_params hw_params;
+
+ struct bcm_sf2_port_status port_sts[DSA_MAX_PORTS];
+
+ /* Mask of ports enabled for Wake-on-LAN */
+ u32 wol_ports_mask;
+};
+
+struct bcm_sf2_hw_stats {
+ const char *string;
+ u16 reg;
+ u8 sizeof_stat;
+};
+
+#define SF2_IO_MACRO(name) \
+static inline u32 name##_readl(struct bcm_sf2_priv *priv, u32 off) \
+{ \
+ return __raw_readl(priv->name + off); \
+} \
+static inline void name##_writel(struct bcm_sf2_priv *priv, \
+ u32 val, u32 off) \
+{ \
+ __raw_writel(val, priv->name + off); \
+} \
+
+/* Accesses to 64-bits register requires us to latch the hi/lo pairs
+ * using the REG_DIR_DATA_{READ,WRITE} ancillary registers. The 'indir_lock'
+ * spinlock is automatically grabbed and released to provide relative
+ * atomiticy with latched reads/writes.
+ */
+#define SF2_IO64_MACRO(name) \
+static inline u64 name##_readq(struct bcm_sf2_priv *priv, u32 off) \
+{ \
+ u32 indir, dir; \
+ spin_lock(&priv->indir_lock); \
+ indir = reg_readl(priv, REG_DIR_DATA_READ); \
+ dir = __raw_readl(priv->name + off); \
+ spin_unlock(&priv->indir_lock); \
+ return (u64)indir << 32 | dir; \
+} \
+static inline void name##_writeq(struct bcm_sf2_priv *priv, u32 off, \
+ u64 val) \
+{ \
+ spin_lock(&priv->indir_lock); \
+ reg_writel(priv, upper_32_bits(val), REG_DIR_DATA_WRITE); \
+ __raw_writel(lower_32_bits(val), priv->name + off); \
+ spin_unlock(&priv->indir_lock); \
+}
+
+#define SWITCH_INTR_L2(which) \
+static inline void intrl2_##which##_mask_clear(struct bcm_sf2_priv *priv, \
+ u32 mask) \
+{ \
+ intrl2_##which##_writel(priv, mask, INTRL2_CPU_MASK_CLEAR); \
+ priv->irq##which##_mask &= ~(mask); \
+} \
+static inline void intrl2_##which##_mask_set(struct bcm_sf2_priv *priv, \
+ u32 mask) \
+{ \
+ intrl2_## which##_writel(priv, mask, INTRL2_CPU_MASK_SET); \
+ priv->irq##which##_mask |= (mask); \
+} \
+
+SF2_IO_MACRO(core);
+SF2_IO_MACRO(reg);
+SF2_IO64_MACRO(core);
+SF2_IO_MACRO(intrl2_0);
+SF2_IO_MACRO(intrl2_1);
+SF2_IO_MACRO(fcb);
+SF2_IO_MACRO(acb);
+
+SWITCH_INTR_L2(0);
+SWITCH_INTR_L2(1);
+
+#endif /* __BCM_SF2_H */
diff --git a/drivers/net/dsa/bcm_sf2_regs.h b/drivers/net/dsa/bcm_sf2_regs.h
new file mode 100644
index 000000000000..1bb49cb699ab
--- /dev/null
+++ b/drivers/net/dsa/bcm_sf2_regs.h
@@ -0,0 +1,231 @@
+/*
+ * Broadcom Starfighter 2 switch register defines
+ *
+ * Copyright (C) 2014, Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __BCM_SF2_REGS_H
+#define __BCM_SF2_REGS_H
+
+/* Register set relative to 'REG' */
+#define REG_SWITCH_CNTRL 0x00
+#define MDIO_MASTER_SEL (1 << 0)
+
+#define REG_SWITCH_STATUS 0x04
+#define REG_DIR_DATA_WRITE 0x08
+#define REG_DIR_DATA_READ 0x0C
+
+#define REG_SWITCH_REVISION 0x18
+#define SF2_REV_MASK 0xffff
+#define SWITCH_TOP_REV_SHIFT 16
+#define SWITCH_TOP_REV_MASK 0xffff
+
+#define REG_PHY_REVISION 0x1C
+#define PHY_REVISION_MASK 0xffff
+
+#define REG_SPHY_CNTRL 0x2C
+#define IDDQ_BIAS (1 << 0)
+#define EXT_PWR_DOWN (1 << 1)
+#define FORCE_DLL_EN (1 << 2)
+#define IDDQ_GLOBAL_PWR (1 << 3)
+#define CK25_DIS (1 << 4)
+#define PHY_RESET (1 << 5)
+#define PHY_PHYAD_SHIFT 8
+#define PHY_PHYAD_MASK 0x1F
+
+#define REG_RGMII_0_BASE 0x34
+#define REG_RGMII_CNTRL 0x00
+#define REG_RGMII_IB_STATUS 0x04
+#define REG_RGMII_RX_CLOCK_DELAY_CNTRL 0x08
+#define REG_RGMII_CNTRL_SIZE 0x0C
+#define REG_RGMII_CNTRL_P(x) (REG_RGMII_0_BASE + \
+ ((x) * REG_RGMII_CNTRL_SIZE))
+/* Relative to REG_RGMII_CNTRL */
+#define RGMII_MODE_EN (1 << 0)
+#define ID_MODE_DIS (1 << 1)
+#define PORT_MODE_SHIFT 2
+#define INT_EPHY (0 << PORT_MODE_SHIFT)
+#define INT_GPHY (1 << PORT_MODE_SHIFT)
+#define EXT_EPHY (2 << PORT_MODE_SHIFT)
+#define EXT_GPHY (3 << PORT_MODE_SHIFT)
+#define EXT_REVMII (4 << PORT_MODE_SHIFT)
+#define PORT_MODE_MASK 0x7
+#define RVMII_REF_SEL (1 << 5)
+#define RX_PAUSE_EN (1 << 6)
+#define TX_PAUSE_EN (1 << 7)
+#define TX_CLK_STOP_EN (1 << 8)
+#define LPI_COUNT_SHIFT 9
+#define LPI_COUNT_MASK 0x3F
+
+/* Register set relative to 'INTRL2_0' and 'INTRL2_1' */
+#define INTRL2_CPU_STATUS 0x00
+#define INTRL2_CPU_SET 0x04
+#define INTRL2_CPU_CLEAR 0x08
+#define INTRL2_CPU_MASK_STATUS 0x0c
+#define INTRL2_CPU_MASK_SET 0x10
+#define INTRL2_CPU_MASK_CLEAR 0x14
+
+/* Shared INTRL2_0 and INTRL2_ interrupt sources macros */
+#define P_LINK_UP_IRQ(x) (1 << (0 + (x)))
+#define P_LINK_DOWN_IRQ(x) (1 << (1 + (x)))
+#define P_ENERGY_ON_IRQ(x) (1 << (2 + (x)))
+#define P_ENERGY_OFF_IRQ(x) (1 << (3 + (x)))
+#define P_GPHY_IRQ(x) (1 << (4 + (x)))
+#define P_NUM_IRQ 5
+#define P_IRQ_MASK(x) (P_LINK_UP_IRQ((x)) | \
+ P_LINK_DOWN_IRQ((x)) | \
+ P_ENERGY_ON_IRQ((x)) | \
+ P_ENERGY_OFF_IRQ((x)) | \
+ P_GPHY_IRQ((x)))
+
+/* INTRL2_0 interrupt sources */
+#define P0_IRQ_OFF 0
+#define MEM_DOUBLE_IRQ (1 << 5)
+#define EEE_LPI_IRQ (1 << 6)
+#define P5_CPU_WAKE_IRQ (1 << 7)
+#define P8_CPU_WAKE_IRQ (1 << 8)
+#define P7_CPU_WAKE_IRQ (1 << 9)
+#define IEEE1588_IRQ (1 << 10)
+#define MDIO_ERR_IRQ (1 << 11)
+#define MDIO_DONE_IRQ (1 << 12)
+#define GISB_ERR_IRQ (1 << 13)
+#define UBUS_ERR_IRQ (1 << 14)
+#define FAILOVER_ON_IRQ (1 << 15)
+#define FAILOVER_OFF_IRQ (1 << 16)
+#define TCAM_SOFT_ERR_IRQ (1 << 17)
+
+/* INTRL2_1 interrupt sources */
+#define P7_IRQ_OFF 0
+#define P_IRQ_OFF(x) ((6 - (x)) * P_NUM_IRQ)
+
+/* Register set relative to 'CORE' */
+#define CORE_G_PCTL_PORT0 0x00000
+#define CORE_G_PCTL_PORT(x) (CORE_G_PCTL_PORT0 + (x * 0x4))
+#define CORE_IMP_CTL 0x00020
+#define RX_DIS (1 << 0)
+#define TX_DIS (1 << 1)
+#define RX_BCST_EN (1 << 2)
+#define RX_MCST_EN (1 << 3)
+#define RX_UCST_EN (1 << 4)
+#define G_MISTP_STATE_SHIFT 5
+#define G_MISTP_NO_STP (0 << G_MISTP_STATE_SHIFT)
+#define G_MISTP_DIS_STATE (1 << G_MISTP_STATE_SHIFT)
+#define G_MISTP_BLOCK_STATE (2 << G_MISTP_STATE_SHIFT)
+#define G_MISTP_LISTEN_STATE (3 << G_MISTP_STATE_SHIFT)
+#define G_MISTP_LEARN_STATE (4 << G_MISTP_STATE_SHIFT)
+#define G_MISTP_FWD_STATE (5 << G_MISTP_STATE_SHIFT)
+#define G_MISTP_STATE_MASK 0x7
+
+#define CORE_SWMODE 0x0002c
+#define SW_FWDG_MODE (1 << 0)
+#define SW_FWDG_EN (1 << 1)
+#define RTRY_LMT_DIS (1 << 2)
+
+#define CORE_STS_OVERRIDE_IMP 0x00038
+#define GMII_SPEED_UP_2G (1 << 6)
+#define MII_SW_OR (1 << 7)
+
+#define CORE_NEW_CTRL 0x00084
+#define IP_MC (1 << 0)
+#define OUTRANGEERR_DISCARD (1 << 1)
+#define INRANGEERR_DISCARD (1 << 2)
+#define CABLE_DIAG_LEN (1 << 3)
+#define OVERRIDE_AUTO_PD_WAR (1 << 4)
+#define EN_AUTO_PD_WAR (1 << 5)
+#define UC_FWD_EN (1 << 6)
+#define MC_FWD_EN (1 << 7)
+
+#define CORE_SWITCH_CTRL 0x00088
+#define MII_DUMB_FWDG_EN (1 << 6)
+
+#define CORE_SFT_LRN_CTRL 0x000f8
+#define SW_LEARN_CNTL(x) (1 << (x))
+
+#define CORE_STS_OVERRIDE_GMIIP_PORT(x) (0x160 + (x) * 4)
+#define LINK_STS (1 << 0)
+#define DUPLX_MODE (1 << 1)
+#define SPEED_SHIFT 2
+#define SPEED_MASK 0x3
+#define RXFLOW_CNTL (1 << 4)
+#define TXFLOW_CNTL (1 << 5)
+#define SW_OVERRIDE (1 << 6)
+
+#define CORE_WATCHDOG_CTRL 0x001e4
+#define SOFTWARE_RESET (1 << 7)
+#define EN_CHIP_RST (1 << 6)
+#define EN_SW_RESET (1 << 4)
+
+#define CORE_LNKSTS 0x00400
+#define LNK_STS_MASK 0x1ff
+
+#define CORE_SPDSTS 0x00410
+#define SPDSTS_10 0
+#define SPDSTS_100 1
+#define SPDSTS_1000 2
+#define SPDSTS_SHIFT 2
+#define SPDSTS_MASK 0x3
+
+#define CORE_DUPSTS 0x00420
+#define CORE_DUPSTS_MASK 0x1ff
+
+#define CORE_PAUSESTS 0x00428
+#define PAUSESTS_TX_PAUSE_SHIFT 9
+
+#define CORE_GMNCFGCFG 0x0800
+#define RST_MIB_CNT (1 << 0)
+#define RXBPDU_EN (1 << 1)
+
+#define CORE_IMP0_PRT_ID 0x0804
+
+#define CORE_BRCM_HDR_CTRL 0x0080c
+#define BRCM_HDR_EN_P8 (1 << 0)
+#define BRCM_HDR_EN_P5 (1 << 1)
+#define BRCM_HDR_EN_P7 (1 << 2)
+
+#define CORE_BRCM_HDR_CTRL2 0x0828
+
+#define CORE_HL_PRTC_CTRL 0x0940
+#define ARP_EN (1 << 0)
+#define RARP_EN (1 << 1)
+#define DHCP_EN (1 << 2)
+#define ICMPV4_EN (1 << 3)
+#define ICMPV6_EN (1 << 4)
+#define ICMPV6_FWD_MODE (1 << 5)
+#define IGMP_DIP_EN (1 << 8)
+#define IGMP_RPTLVE_EN (1 << 9)
+#define IGMP_RTPLVE_FWD_MODE (1 << 10)
+#define IGMP_QRY_EN (1 << 11)
+#define IGMP_QRY_FWD_MODE (1 << 12)
+#define IGMP_UKN_EN (1 << 13)
+#define IGMP_UKN_FWD_MODE (1 << 14)
+#define MLD_RPTDONE_EN (1 << 15)
+#define MLD_RPTDONE_FWD_MODE (1 << 16)
+#define MLD_QRY_EN (1 << 17)
+#define MLD_QRY_FWD_MODE (1 << 18)
+
+#define CORE_RST_MIB_CNT_EN 0x0950
+
+#define CORE_BRCM_HDR_RX_DIS 0x0980
+#define CORE_BRCM_HDR_TX_DIS 0x0988
+
+#define CORE_MEM_PSM_VDD_CTRL 0x2380
+#define P_TXQ_PSM_VDD_SHIFT 2
+#define P_TXQ_PSM_VDD_MASK 0x3
+#define P_TXQ_PSM_VDD(x) (P_TXQ_PSM_VDD_MASK << \
+ ((x) * P_TXQ_PSM_VDD_SHIFT))
+
+#define CORE_P0_MIB_OFFSET 0x8000
+#define P_MIB_SIZE 0x400
+#define CORE_P_MIB_OFFSET(x) (CORE_P0_MIB_OFFSET + (x) * P_MIB_SIZE)
+
+#define CORE_PORT_VLAN_CTL_PORT(x) (0xc400 + ((x) * 0x8))
+#define PORT_VLAN_CTRL_MASK 0x1ff
+
+#define CORE_EEE_EN_CTRL 0x24800
+#define CORE_EEE_LPI_INDICATE 0x24810
+
+#endif /* __BCM_SF2_REGS_H */
diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c
index 7a54ec04b418..776e965dc9f4 100644
--- a/drivers/net/dsa/mv88e6060.c
+++ b/drivers/net/dsa/mv88e6060.c
@@ -21,7 +21,8 @@
static int reg_read(struct dsa_switch *ds, int addr, int reg)
{
- return mdiobus_read(ds->master_mii_bus, ds->pd->sw_addr + addr, reg);
+ return mdiobus_read(to_mii_bus(ds->master_dev),
+ ds->pd->sw_addr + addr, reg);
}
#define REG_READ(addr, reg) \
@@ -37,8 +38,8 @@ static int reg_read(struct dsa_switch *ds, int addr, int reg)
static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
{
- return mdiobus_write(ds->master_mii_bus, ds->pd->sw_addr + addr,
- reg, val);
+ return mdiobus_write(to_mii_bus(ds->master_dev),
+ ds->pd->sw_addr + addr, reg, val);
}
#define REG_WRITE(addr, reg, val) \
@@ -50,10 +51,14 @@ static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
return __ret; \
})
-static char *mv88e6060_probe(struct mii_bus *bus, int sw_addr)
+static char *mv88e6060_probe(struct device *host_dev, int sw_addr)
{
+ struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
int ret;
+ if (bus == NULL)
+ return NULL;
+
ret = mdiobus_read(bus, sw_addr + REG_PORT(0), 0x03);
if (ret >= 0) {
ret &= 0xfff0;
@@ -258,7 +263,7 @@ static void mv88e6060_poll_link(struct dsa_switch *ds)
}
static struct dsa_switch_driver mv88e6060_switch_driver = {
- .tag_protocol = htons(ETH_P_TRAILER),
+ .tag_protocol = DSA_TAG_PROTO_TRAILER,
.probe = mv88e6060_probe,
.setup = mv88e6060_setup,
.set_addr = mv88e6060_set_addr,
diff --git a/drivers/net/dsa/mv88e6123_61_65.c b/drivers/net/dsa/mv88e6123_61_65.c
index 69c42513dd72..a332c53ff955 100644
--- a/drivers/net/dsa/mv88e6123_61_65.c
+++ b/drivers/net/dsa/mv88e6123_61_65.c
@@ -17,10 +17,14 @@
#include <net/dsa.h>
#include "mv88e6xxx.h"
-static char *mv88e6123_61_65_probe(struct mii_bus *bus, int sw_addr)
+static char *mv88e6123_61_65_probe(struct device *host_dev, int sw_addr)
{
+ struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
int ret;
+ if (bus == NULL)
+ return NULL;
+
ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), 0x03);
if (ret >= 0) {
if (ret == 0x1212)
@@ -207,7 +211,7 @@ static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p)
*/
val = 0x0433;
if (dsa_is_cpu_port(ds, p)) {
- if (ds->dst->tag_protocol == htons(ETH_P_EDSA))
+ if (ds->dst->tag_protocol == DSA_TAG_PROTO_EDSA)
val |= 0x3300;
else
val |= 0x0100;
@@ -391,7 +395,7 @@ static int mv88e6123_61_65_get_sset_count(struct dsa_switch *ds)
}
struct dsa_switch_driver mv88e6123_61_65_switch_driver = {
- .tag_protocol = cpu_to_be16(ETH_P_EDSA),
+ .tag_protocol = DSA_TAG_PROTO_EDSA,
.priv_size = sizeof(struct mv88e6xxx_priv_state),
.probe = mv88e6123_61_65_probe,
.setup = mv88e6123_61_65_setup,
diff --git a/drivers/net/dsa/mv88e6131.c b/drivers/net/dsa/mv88e6131.c
index 953bc6a49e59..244c735014fa 100644
--- a/drivers/net/dsa/mv88e6131.c
+++ b/drivers/net/dsa/mv88e6131.c
@@ -22,10 +22,14 @@
#define ID_6095 0x0950
#define ID_6131 0x1060
-static char *mv88e6131_probe(struct mii_bus *bus, int sw_addr)
+static char *mv88e6131_probe(struct device *host_dev, int sw_addr)
{
+ struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
int ret;
+ if (bus == NULL)
+ return NULL;
+
ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), 0x03);
if (ret >= 0) {
ret &= 0xfff0;
@@ -379,7 +383,7 @@ static int mv88e6131_get_sset_count(struct dsa_switch *ds)
}
struct dsa_switch_driver mv88e6131_switch_driver = {
- .tag_protocol = cpu_to_be16(ETH_P_DSA),
+ .tag_protocol = DSA_TAG_PROTO_DSA,
.priv_size = sizeof(struct mv88e6xxx_priv_state),
.probe = mv88e6131_probe,
.setup = mv88e6131_setup,
diff --git a/drivers/net/dsa/mv88e6171.c b/drivers/net/dsa/mv88e6171.c
new file mode 100644
index 000000000000..6365e30138af
--- /dev/null
+++ b/drivers/net/dsa/mv88e6171.c
@@ -0,0 +1,411 @@
+/* net/dsa/mv88e6171.c - Marvell 88e6171 switch chip support
+ * Copyright (c) 2008-2009 Marvell Semiconductor
+ * Copyright (c) 2014 Claudio Leite <leitec@staticky.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include <net/dsa.h>
+#include "mv88e6xxx.h"
+
+static char *mv88e6171_probe(struct device *host_dev, int sw_addr)
+{
+ struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
+ int ret;
+
+ if (bus == NULL)
+ return NULL;
+
+ ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), 0x03);
+ if (ret >= 0) {
+ if ((ret & 0xfff0) == 0x1710)
+ return "Marvell 88E6171";
+ }
+
+ return NULL;
+}
+
+static int mv88e6171_switch_reset(struct dsa_switch *ds)
+{
+ int i;
+ int ret;
+ unsigned long timeout;
+
+ /* Set all ports to the disabled state. */
+ for (i = 0; i < 8; i++) {
+ ret = REG_READ(REG_PORT(i), 0x04);
+ REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
+ }
+
+ /* Wait for transmit queues to drain. */
+ usleep_range(2000, 4000);
+
+ /* Reset the switch. */
+ REG_WRITE(REG_GLOBAL, 0x04, 0xc400);
+
+ /* Wait up to one second for reset to complete. */
+ timeout = jiffies + 1 * HZ;
+ while (time_before(jiffies, timeout)) {
+ ret = REG_READ(REG_GLOBAL, 0x00);
+ if ((ret & 0xc800) == 0xc800)
+ break;
+
+ usleep_range(1000, 2000);
+ }
+ if (time_after(jiffies, timeout))
+ return -ETIMEDOUT;
+
+ /* Enable ports not under DSA, e.g. WAN port */
+ for (i = 0; i < 8; i++) {
+ if (dsa_is_cpu_port(ds, i) || ds->phys_port_mask & (1 << i))
+ continue;
+
+ ret = REG_READ(REG_PORT(i), 0x04);
+ REG_WRITE(REG_PORT(i), 0x04, ret | 0x03);
+ }
+
+ return 0;
+}
+
+static int mv88e6171_setup_global(struct dsa_switch *ds)
+{
+ int ret;
+ int i;
+
+ /* Disable the PHY polling unit (since there won't be any
+ * external PHYs to poll), don't discard packets with
+ * excessive collisions, and mask all interrupt sources.
+ */
+ REG_WRITE(REG_GLOBAL, 0x04, 0x0000);
+
+ /* Set the default address aging time to 5 minutes, and
+ * enable address learn messages to be sent to all message
+ * ports.
+ */
+ REG_WRITE(REG_GLOBAL, 0x0a, 0x0148);
+
+ /* Configure the priority mapping registers. */
+ ret = mv88e6xxx_config_prio(ds);
+ if (ret < 0)
+ return ret;
+
+ /* Configure the upstream port, and configure the upstream
+ * port as the port to which ingress and egress monitor frames
+ * are to be sent.
+ */
+ if (REG_READ(REG_PORT(0), 0x03) == 0x1710)
+ REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1111));
+ else
+ REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1110));
+
+ /* Disable remote management for now, and set the switch's
+ * DSA device number.
+ */
+ REG_WRITE(REG_GLOBAL, 0x1c, ds->index & 0x1f);
+
+ /* Send all frames with destination addresses matching
+ * 01:80:c2:00:00:2x to the CPU port.
+ */
+ REG_WRITE(REG_GLOBAL2, 0x02, 0xffff);
+
+ /* Send all frames with destination addresses matching
+ * 01:80:c2:00:00:0x to the CPU port.
+ */
+ REG_WRITE(REG_GLOBAL2, 0x03, 0xffff);
+
+ /* Disable the loopback filter, disable flow control
+ * messages, disable flood broadcast override, disable
+ * removing of provider tags, disable ATU age violation
+ * interrupts, disable tag flow control, force flow
+ * control priority to the highest, and send all special
+ * multicast frames to the CPU at the highest priority.
+ */
+ REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff);
+
+ /* Program the DSA routing table. */
+ for (i = 0; i < 32; i++) {
+ int nexthop;
+
+ nexthop = 0x1f;
+ if (i != ds->index && i < ds->dst->pd->nr_chips)
+ nexthop = ds->pd->rtable[i] & 0x1f;
+
+ REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop);
+ }
+
+ /* Clear all trunk masks. */
+ for (i = 0; i < 8; i++)
+ REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0xff);
+
+ /* Clear all trunk mappings. */
+ for (i = 0; i < 16; i++)
+ REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11));
+
+ /* Disable ingress rate limiting by resetting all ingress
+ * rate limit registers to their initial state.
+ */
+ for (i = 0; i < 6; i++)
+ REG_WRITE(REG_GLOBAL2, 0x09, 0x9000 | (i << 8));
+
+ /* Initialise cross-chip port VLAN table to reset defaults. */
+ REG_WRITE(REG_GLOBAL2, 0x0b, 0x9000);
+
+ /* Clear the priority override table. */
+ for (i = 0; i < 16; i++)
+ REG_WRITE(REG_GLOBAL2, 0x0f, 0x8000 | (i << 8));
+
+ /* @@@ initialise AVB (22/23) watchdog (27) sdet (29) registers */
+
+ return 0;
+}
+
+static int mv88e6171_setup_port(struct dsa_switch *ds, int p)
+{
+ int addr = REG_PORT(p);
+ u16 val;
+
+ /* MAC Forcing register: don't force link, speed, duplex
+ * or flow control state to any particular values on physical
+ * ports, but force the CPU port and all DSA ports to 1000 Mb/s
+ * full duplex.
+ */
+ val = REG_READ(addr, 0x01);
+ if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p))
+ REG_WRITE(addr, 0x01, val | 0x003e);
+ else
+ REG_WRITE(addr, 0x01, val | 0x0003);
+
+ /* Do not limit the period of time that this port can be
+ * paused for by the remote end or the period of time that
+ * this port can pause the remote end.
+ */
+ REG_WRITE(addr, 0x02, 0x0000);
+
+ /* Port Control: disable Drop-on-Unlock, disable Drop-on-Lock,
+ * disable Header mode, enable IGMP/MLD snooping, disable VLAN
+ * tunneling, determine priority by looking at 802.1p and IP
+ * priority fields (IP prio has precedence), and set STP state
+ * to Forwarding.
+ *
+ * If this is the CPU link, use DSA or EDSA tagging depending
+ * on which tagging mode was configured.
+ *
+ * If this is a link to another switch, use DSA tagging mode.
+ *
+ * If this is the upstream port for this switch, enable
+ * forwarding of unknown unicasts and multicasts.
+ */
+ val = 0x0433;
+ if (dsa_is_cpu_port(ds, p)) {
+ if (ds->dst->tag_protocol == htons(ETH_P_EDSA))
+ val |= 0x3300;
+ else
+ val |= 0x0100;
+ }
+ if (ds->dsa_port_mask & (1 << p))
+ val |= 0x0100;
+ if (p == dsa_upstream_port(ds))
+ val |= 0x000c;
+ REG_WRITE(addr, 0x04, val);
+
+ /* Port Control 1: disable trunking. Also, if this is the
+ * CPU port, enable learn messages to be sent to this port.
+ */
+ REG_WRITE(addr, 0x05, dsa_is_cpu_port(ds, p) ? 0x8000 : 0x0000);
+
+ /* Port based VLAN map: give each port its own address
+ * database, allow the CPU port to talk to each of the 'real'
+ * ports, and allow each of the 'real' ports to only talk to
+ * the upstream port.
+ */
+ val = (p & 0xf) << 12;
+ if (dsa_is_cpu_port(ds, p))
+ val |= ds->phys_port_mask;
+ else
+ val |= 1 << dsa_upstream_port(ds);
+ REG_WRITE(addr, 0x06, val);
+
+ /* Default VLAN ID and priority: don't set a default VLAN
+ * ID, and set the default packet priority to zero.
+ */
+ REG_WRITE(addr, 0x07, 0x0000);
+
+ /* Port Control 2: don't force a good FCS, set the maximum
+ * frame size to 10240 bytes, don't let the switch add or
+ * strip 802.1q tags, don't discard tagged or untagged frames
+ * on this port, do a destination address lookup on all
+ * received packets as usual, disable ARP mirroring and don't
+ * send a copy of all transmitted/received frames on this port
+ * to the CPU.
+ */
+ REG_WRITE(addr, 0x08, 0x2080);
+
+ /* Egress rate control: disable egress rate control. */
+ REG_WRITE(addr, 0x09, 0x0001);
+
+ /* Egress rate control 2: disable egress rate control. */
+ REG_WRITE(addr, 0x0a, 0x0000);
+
+ /* Port Association Vector: when learning source addresses
+ * of packets, add the address to the address database using
+ * a port bitmap that has only the bit for this port set and
+ * the other bits clear.
+ */
+ REG_WRITE(addr, 0x0b, 1 << p);
+
+ /* Port ATU control: disable limiting the number of address
+ * database entries that this port is allowed to use.
+ */
+ REG_WRITE(addr, 0x0c, 0x0000);
+
+ /* Priority Override: disable DA, SA and VTU priority override. */
+ REG_WRITE(addr, 0x0d, 0x0000);
+
+ /* Port Ethertype: use the Ethertype DSA Ethertype value. */
+ REG_WRITE(addr, 0x0f, ETH_P_EDSA);
+
+ /* Tag Remap: use an identity 802.1p prio -> switch prio
+ * mapping.
+ */
+ REG_WRITE(addr, 0x18, 0x3210);
+
+ /* Tag Remap 2: use an identity 802.1p prio -> switch prio
+ * mapping.
+ */
+ REG_WRITE(addr, 0x19, 0x7654);
+
+ return 0;
+}
+
+static int mv88e6171_setup(struct dsa_switch *ds)
+{
+ struct mv88e6xxx_priv_state *ps = (void *)(ds + 1);
+ int i;
+ int ret;
+
+ mutex_init(&ps->smi_mutex);
+ mutex_init(&ps->stats_mutex);
+
+ ret = mv88e6171_switch_reset(ds);
+ if (ret < 0)
+ return ret;
+
+ /* @@@ initialise vtu and atu */
+
+ ret = mv88e6171_setup_global(ds);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < 8; i++) {
+ if (!(dsa_is_cpu_port(ds, i) || ds->phys_port_mask & (1 << i)))
+ continue;
+
+ ret = mv88e6171_setup_port(ds, i);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mv88e6171_port_to_phy_addr(int port)
+{
+ if (port >= 0 && port <= 4)
+ return port;
+ return -1;
+}
+
+static int
+mv88e6171_phy_read(struct dsa_switch *ds, int port, int regnum)
+{
+ int addr = mv88e6171_port_to_phy_addr(port);
+
+ return mv88e6xxx_phy_read(ds, addr, regnum);
+}
+
+static int
+mv88e6171_phy_write(struct dsa_switch *ds,
+ int port, int regnum, u16 val)
+{
+ int addr = mv88e6171_port_to_phy_addr(port);
+
+ return mv88e6xxx_phy_write(ds, addr, regnum, val);
+}
+
+static struct mv88e6xxx_hw_stat mv88e6171_hw_stats[] = {
+ { "in_good_octets", 8, 0x00, },
+ { "in_bad_octets", 4, 0x02, },
+ { "in_unicast", 4, 0x04, },
+ { "in_broadcasts", 4, 0x06, },
+ { "in_multicasts", 4, 0x07, },
+ { "in_pause", 4, 0x16, },
+ { "in_undersize", 4, 0x18, },
+ { "in_fragments", 4, 0x19, },
+ { "in_oversize", 4, 0x1a, },
+ { "in_jabber", 4, 0x1b, },
+ { "in_rx_error", 4, 0x1c, },
+ { "in_fcs_error", 4, 0x1d, },
+ { "out_octets", 8, 0x0e, },
+ { "out_unicast", 4, 0x10, },
+ { "out_broadcasts", 4, 0x13, },
+ { "out_multicasts", 4, 0x12, },
+ { "out_pause", 4, 0x15, },
+ { "excessive", 4, 0x11, },
+ { "collisions", 4, 0x1e, },
+ { "deferred", 4, 0x05, },
+ { "single", 4, 0x14, },
+ { "multiple", 4, 0x17, },
+ { "out_fcs_error", 4, 0x03, },
+ { "late", 4, 0x1f, },
+ { "hist_64bytes", 4, 0x08, },
+ { "hist_65_127bytes", 4, 0x09, },
+ { "hist_128_255bytes", 4, 0x0a, },
+ { "hist_256_511bytes", 4, 0x0b, },
+ { "hist_512_1023bytes", 4, 0x0c, },
+ { "hist_1024_max_bytes", 4, 0x0d, },
+};
+
+static void
+mv88e6171_get_strings(struct dsa_switch *ds, int port, uint8_t *data)
+{
+ mv88e6xxx_get_strings(ds, ARRAY_SIZE(mv88e6171_hw_stats),
+ mv88e6171_hw_stats, port, data);
+}
+
+static void
+mv88e6171_get_ethtool_stats(struct dsa_switch *ds,
+ int port, uint64_t *data)
+{
+ mv88e6xxx_get_ethtool_stats(ds, ARRAY_SIZE(mv88e6171_hw_stats),
+ mv88e6171_hw_stats, port, data);
+}
+
+static int mv88e6171_get_sset_count(struct dsa_switch *ds)
+{
+ return ARRAY_SIZE(mv88e6171_hw_stats);
+}
+
+struct dsa_switch_driver mv88e6171_switch_driver = {
+ .tag_protocol = DSA_TAG_PROTO_DSA,
+ .priv_size = sizeof(struct mv88e6xxx_priv_state),
+ .probe = mv88e6171_probe,
+ .setup = mv88e6171_setup,
+ .set_addr = mv88e6xxx_set_addr_indirect,
+ .phy_read = mv88e6171_phy_read,
+ .phy_write = mv88e6171_phy_write,
+ .poll_link = mv88e6xxx_poll_link,
+ .get_strings = mv88e6171_get_strings,
+ .get_ethtool_stats = mv88e6171_get_ethtool_stats,
+ .get_sset_count = mv88e6171_get_sset_count,
+};
+
+MODULE_ALIAS("platform:mv88e6171");
diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c
index 9ce2146346b6..d6f6428b27dc 100644
--- a/drivers/net/dsa/mv88e6xxx.c
+++ b/drivers/net/dsa/mv88e6xxx.c
@@ -78,7 +78,7 @@ int mv88e6xxx_reg_read(struct dsa_switch *ds, int addr, int reg)
int ret;
mutex_lock(&ps->smi_mutex);
- ret = __mv88e6xxx_reg_read(ds->master_mii_bus,
+ ret = __mv88e6xxx_reg_read(to_mii_bus(ds->master_dev),
ds->pd->sw_addr, addr, reg);
mutex_unlock(&ps->smi_mutex);
@@ -122,7 +122,7 @@ int mv88e6xxx_reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
int ret;
mutex_lock(&ps->smi_mutex);
- ret = __mv88e6xxx_reg_write(ds->master_mii_bus,
+ ret = __mv88e6xxx_reg_write(to_mii_bus(ds->master_dev),
ds->pd->sw_addr, addr, reg, val);
mutex_unlock(&ps->smi_mutex);
@@ -501,12 +501,18 @@ static int __init mv88e6xxx_init(void)
#if IS_ENABLED(CONFIG_NET_DSA_MV88E6123_61_65)
register_switch_driver(&mv88e6123_61_65_switch_driver);
#endif
+#if IS_ENABLED(CONFIG_NET_DSA_MV88E6171)
+ register_switch_driver(&mv88e6171_switch_driver);
+#endif
return 0;
}
module_init(mv88e6xxx_init);
static void __exit mv88e6xxx_cleanup(void)
{
+#if IS_ENABLED(CONFIG_NET_DSA_MV88E6171)
+ unregister_switch_driver(&mv88e6171_switch_driver);
+#endif
#if IS_ENABLED(CONFIG_NET_DSA_MV88E6123_61_65)
unregister_switch_driver(&mv88e6123_61_65_switch_driver);
#endif
diff --git a/drivers/net/dsa/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx.h
index 911ede58dd12..5e5145ad9525 100644
--- a/drivers/net/dsa/mv88e6xxx.h
+++ b/drivers/net/dsa/mv88e6xxx.h
@@ -70,6 +70,7 @@ void mv88e6xxx_get_ethtool_stats(struct dsa_switch *ds,
extern struct dsa_switch_driver mv88e6131_switch_driver;
extern struct dsa_switch_driver mv88e6123_61_65_switch_driver;
+extern struct dsa_switch_driver mv88e6171_switch_driver;
#define REG_READ(addr, reg) \
({ \
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.