aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/dsa
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dsa')
-rw-r--r--drivers/net/dsa/Kconfig8
-rw-r--r--drivers/net/dsa/Makefile1
-rw-r--r--drivers/net/dsa/b53/Kconfig10
-rw-r--r--drivers/net/dsa/b53/Makefile1
-rw-r--r--drivers/net/dsa/b53/b53_common.c248
-rw-r--r--drivers/net/dsa/b53/b53_priv.h36
-rw-r--r--drivers/net/dsa/b53/b53_serdes.c214
-rw-r--r--drivers/net/dsa/b53/b53_serdes.h128
-rw-r--r--drivers/net/dsa/b53/b53_srab.c215
-rw-r--r--drivers/net/dsa/bcm_sf2.c3
-rw-r--r--drivers/net/dsa/lantiq_gswip.c1167
-rw-r--r--drivers/net/dsa/lantiq_pce.h153
-rw-r--r--drivers/net/dsa/mt7530.c6
-rw-r--r--drivers/net/dsa/mv88e6xxx/chip.c24
-rw-r--r--drivers/net/dsa/mv88e6xxx/phy.c3
-rw-r--r--drivers/net/dsa/mv88e6xxx/serdes.c105
-rw-r--r--drivers/net/dsa/mv88e6xxx/serdes.h16
17 files changed, 2299 insertions, 39 deletions
diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
index d3ce1e4cb4d3..71bb3aebded4 100644
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -23,6 +23,14 @@ config NET_DSA_LOOP
This enables support for a fake mock-up switch chip which
exercises the DSA APIs.
+config NET_DSA_LANTIQ_GSWIP
+ tristate "Lantiq / Intel GSWIP"
+ depends on HAS_IOMEM && NET_DSA
+ select NET_DSA_TAG_GSWIP
+ ---help---
+ This enables support for the Lantiq / Intel GSWIP 2.1 found in
+ the xrx200 / VR9 SoC.
+
config NET_DSA_MT7530
tristate "Mediatek MT7530 Ethernet switch support"
depends on NET_DSA
diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile
index 46c1cba91ffe..82e5d794c41f 100644
--- a/drivers/net/dsa/Makefile
+++ b/drivers/net/dsa/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_NET_DSA_LOOP) += dsa_loop.o
ifdef CONFIG_NET_DSA_LOOP
obj-$(CONFIG_FIXED_PHY) += dsa_loop_bdinfo.o
endif
+obj-$(CONFIG_NET_DSA_LANTIQ_GSWIP) += lantiq_gswip.o
obj-$(CONFIG_NET_DSA_MT7530) += mt7530.o
obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o
diff --git a/drivers/net/dsa/b53/Kconfig b/drivers/net/dsa/b53/Kconfig
index 2f988216dab9..d32469283f97 100644
--- a/drivers/net/dsa/b53/Kconfig
+++ b/drivers/net/dsa/b53/Kconfig
@@ -23,6 +23,7 @@ config B53_MDIO_DRIVER
config B53_MMAP_DRIVER
tristate "B53 MMAP connected switch driver"
depends on B53 && HAS_IOMEM
+ default BCM63XX || BMIPS_GENERIC
help
Select to enable support for memory-mapped switches like the BCM63XX
integrated switches.
@@ -30,6 +31,15 @@ config B53_MMAP_DRIVER
config B53_SRAB_DRIVER
tristate "B53 SRAB connected switch driver"
depends on B53 && HAS_IOMEM
+ depends on B53_SERDES || !B53_SERDES
+ default ARCH_BCM_IPROC
help
Select to enable support for memory-mapped Switch Register Access
Bridge Registers (SRAB) like it is found on the BCM53010
+
+config B53_SERDES
+ tristate "B53 SerDes support"
+ depends on B53
+ default ARCH_BCM_NSP
+ help
+ Select to enable support for SerDes on e.g: Northstar Plus SoCs.
diff --git a/drivers/net/dsa/b53/Makefile b/drivers/net/dsa/b53/Makefile
index 4256fb42a4dd..b1be13023ae4 100644
--- a/drivers/net/dsa/b53/Makefile
+++ b/drivers/net/dsa/b53/Makefile
@@ -5,3 +5,4 @@ obj-$(CONFIG_B53_SPI_DRIVER) += b53_spi.o
obj-$(CONFIG_B53_MDIO_DRIVER) += b53_mdio.o
obj-$(CONFIG_B53_MMAP_DRIVER) += b53_mmap.o
obj-$(CONFIG_B53_SRAB_DRIVER) += b53_srab.o
+obj-$(CONFIG_B53_SERDES) += b53_serdes.o
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index ad534b90ef21..0e4bbdcc614f 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -26,6 +26,7 @@
#include <linux/module.h>
#include <linux/platform_data/b53.h>
#include <linux/phy.h>
+#include <linux/phylink.h>
#include <linux/etherdevice.h>
#include <linux/if_bridge.h>
#include <net/dsa.h>
@@ -502,8 +503,14 @@ int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
{
struct b53_device *dev = ds->priv;
unsigned int cpu_port = ds->ports[port].cpu_dp->index;
+ int ret = 0;
u16 pvlan;
+ if (dev->ops->irq_enable)
+ ret = dev->ops->irq_enable(dev, port);
+ if (ret)
+ return ret;
+
/* Clear the Rx and Tx disable bits and set to no spanning tree */
b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), 0);
@@ -536,6 +543,9 @@ void b53_disable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), &reg);
reg |= PORT_CTRL_RX_DISABLE | PORT_CTRL_TX_DISABLE;
b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
+
+ if (dev->ops->irq_disable)
+ dev->ops->irq_disable(dev, port);
}
EXPORT_SYMBOL(b53_disable_port);
@@ -755,6 +765,8 @@ static int b53_reset_switch(struct b53_device *priv)
memset(priv->vlans, 0, sizeof(*priv->vlans) * priv->num_vlans);
memset(priv->ports, 0, sizeof(*priv->ports) * priv->num_ports);
+ priv->serdes_lane = B53_INVALID_LANE;
+
return b53_switch_reset(priv);
}
@@ -938,33 +950,50 @@ static int b53_setup(struct dsa_switch *ds)
return ret;
}
-static void b53_adjust_link(struct dsa_switch *ds, int port,
- struct phy_device *phydev)
+static void b53_force_link(struct b53_device *dev, int port, int link)
{
- struct b53_device *dev = ds->priv;
- struct ethtool_eee *p = &dev->ports[port].eee;
- u8 rgmii_ctrl = 0, reg = 0, off;
-
- if (!phy_is_pseudo_fixed_link(phydev))
- return;
+ u8 reg, val, off;
/* Override the port settings */
if (port == dev->cpu_port) {
off = B53_PORT_OVERRIDE_CTRL;
- reg = PORT_OVERRIDE_EN;
+ val = PORT_OVERRIDE_EN;
} else {
off = B53_GMII_PORT_OVERRIDE_CTRL(port);
- reg = GMII_PO_EN;
+ val = GMII_PO_EN;
}
- /* Set the link UP */
- if (phydev->link)
+ b53_read8(dev, B53_CTRL_PAGE, off, &reg);
+ reg |= val;
+ if (link)
reg |= PORT_OVERRIDE_LINK;
+ else
+ reg &= ~PORT_OVERRIDE_LINK;
+ b53_write8(dev, B53_CTRL_PAGE, off, reg);
+}
- if (phydev->duplex == DUPLEX_FULL)
+static void b53_force_port_config(struct b53_device *dev, int port,
+ int speed, int duplex, int pause)
+{
+ u8 reg, val, off;
+
+ /* Override the port settings */
+ if (port == dev->cpu_port) {
+ off = B53_PORT_OVERRIDE_CTRL;
+ val = PORT_OVERRIDE_EN;
+ } else {
+ off = B53_GMII_PORT_OVERRIDE_CTRL(port);
+ val = GMII_PO_EN;
+ }
+
+ b53_read8(dev, B53_CTRL_PAGE, off, &reg);
+ reg |= val;
+ if (duplex == DUPLEX_FULL)
reg |= PORT_OVERRIDE_FULL_DUPLEX;
+ else
+ reg &= ~PORT_OVERRIDE_FULL_DUPLEX;
- switch (phydev->speed) {
+ switch (speed) {
case 2000:
reg |= PORT_OVERRIDE_SPEED_2000M;
/* fallthrough */
@@ -978,21 +1007,41 @@ static void b53_adjust_link(struct dsa_switch *ds, int port,
reg |= PORT_OVERRIDE_SPEED_10M;
break;
default:
- dev_err(ds->dev, "unknown speed: %d\n", phydev->speed);
+ dev_err(dev->dev, "unknown speed: %d\n", speed);
return;
}
+ if (pause & MLO_PAUSE_RX)
+ reg |= PORT_OVERRIDE_RX_FLOW;
+ if (pause & MLO_PAUSE_TX)
+ reg |= PORT_OVERRIDE_TX_FLOW;
+
+ b53_write8(dev, B53_CTRL_PAGE, off, reg);
+}
+
+static void b53_adjust_link(struct dsa_switch *ds, int port,
+ struct phy_device *phydev)
+{
+ struct b53_device *dev = ds->priv;
+ struct ethtool_eee *p = &dev->ports[port].eee;
+ u8 rgmii_ctrl = 0, reg = 0, off;
+ int pause = 0;
+
+ if (!phy_is_pseudo_fixed_link(phydev))
+ return;
+
/* Enable flow control on BCM5301x's CPU port */
if (is5301x(dev) && port == dev->cpu_port)
- reg |= PORT_OVERRIDE_RX_FLOW | PORT_OVERRIDE_TX_FLOW;
+ pause = MLO_PAUSE_TXRX_MASK;
if (phydev->pause) {
if (phydev->asym_pause)
- reg |= PORT_OVERRIDE_TX_FLOW;
- reg |= PORT_OVERRIDE_RX_FLOW;
+ pause |= MLO_PAUSE_TX;
+ pause |= MLO_PAUSE_RX;
}
- b53_write8(dev, B53_CTRL_PAGE, off, reg);
+ b53_force_port_config(dev, port, phydev->speed, phydev->duplex, pause);
+ b53_force_link(dev, port, phydev->link);
if (is531x5(dev) && phy_interface_is_rgmii(phydev)) {
if (port == 8)
@@ -1052,16 +1101,9 @@ static void b53_adjust_link(struct dsa_switch *ds, int port,
}
} else if (is5301x(dev)) {
if (port != dev->cpu_port) {
- u8 po_reg = B53_GMII_PORT_OVERRIDE_CTRL(dev->cpu_port);
- u8 gmii_po;
-
- b53_read8(dev, B53_CTRL_PAGE, po_reg, &gmii_po);
- gmii_po |= GMII_PO_LINK |
- GMII_PO_RX_FLOW |
- GMII_PO_TX_FLOW |
- GMII_PO_EN |
- GMII_PO_SPEED_2000M;
- b53_write8(dev, B53_CTRL_PAGE, po_reg, gmii_po);
+ b53_force_port_config(dev, dev->cpu_port, 2000,
+ DUPLEX_FULL, MLO_PAUSE_TXRX_MASK);
+ b53_force_link(dev, dev->cpu_port, 1);
}
}
@@ -1069,6 +1111,148 @@ static void b53_adjust_link(struct dsa_switch *ds, int port,
p->eee_enabled = b53_eee_init(ds, port, phydev);
}
+void b53_port_event(struct dsa_switch *ds, int port)
+{
+ struct b53_device *dev = ds->priv;
+ bool link;
+ u16 sts;
+
+ b53_read16(dev, B53_STAT_PAGE, B53_LINK_STAT, &sts);
+ link = !!(sts & BIT(port));
+ dsa_port_phylink_mac_change(ds, port, link);
+}
+EXPORT_SYMBOL(b53_port_event);
+
+void b53_phylink_validate(struct dsa_switch *ds, int port,
+ unsigned long *supported,
+ struct phylink_link_state *state)
+{
+ struct b53_device *dev = ds->priv;
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
+
+ if (dev->ops->serdes_phylink_validate)
+ dev->ops->serdes_phylink_validate(dev, port, mask, state);
+
+ /* Allow all the expected bits */
+ phylink_set(mask, Autoneg);
+ phylink_set_port_modes(mask);
+ phylink_set(mask, Pause);
+ phylink_set(mask, Asym_Pause);
+
+ /* With the exclusion of 5325/5365, MII, Reverse MII and 802.3z, we
+ * support Gigabit, including Half duplex.
+ */
+ if (state->interface != PHY_INTERFACE_MODE_MII &&
+ state->interface != PHY_INTERFACE_MODE_REVMII &&
+ !phy_interface_mode_is_8023z(state->interface) &&
+ !(is5325(dev) || is5365(dev))) {
+ phylink_set(mask, 1000baseT_Full);
+ phylink_set(mask, 1000baseT_Half);
+ }
+
+ if (!phy_interface_mode_is_8023z(state->interface)) {
+ phylink_set(mask, 10baseT_Half);
+ phylink_set(mask, 10baseT_Full);
+ phylink_set(mask, 100baseT_Half);
+ phylink_set(mask, 100baseT_Full);
+ }
+
+ bitmap_and(supported, supported, mask,
+ __ETHTOOL_LINK_MODE_MASK_NBITS);
+ bitmap_and(state->advertising, state->advertising, mask,
+ __ETHTOOL_LINK_MODE_MASK_NBITS);
+
+ phylink_helper_basex_speed(state);
+}
+EXPORT_SYMBOL(b53_phylink_validate);
+
+int b53_phylink_mac_link_state(struct dsa_switch *ds, int port,
+ struct phylink_link_state *state)
+{
+ struct b53_device *dev = ds->priv;
+ int ret = -EOPNOTSUPP;
+
+ if ((phy_interface_mode_is_8023z(state->interface) ||
+ state->interface == PHY_INTERFACE_MODE_SGMII) &&
+ dev->ops->serdes_link_state)
+ ret = dev->ops->serdes_link_state(dev, port, state);
+
+ return ret;
+}
+EXPORT_SYMBOL(b53_phylink_mac_link_state);
+
+void b53_phylink_mac_config(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ const struct phylink_link_state *state)
+{
+ struct b53_device *dev = ds->priv;
+
+ if (mode == MLO_AN_PHY)
+ return;
+
+ if (mode == MLO_AN_FIXED) {
+ b53_force_port_config(dev, port, state->speed,
+ state->duplex, state->pause);
+ return;
+ }
+
+ if ((phy_interface_mode_is_8023z(state->interface) ||
+ state->interface == PHY_INTERFACE_MODE_SGMII) &&
+ dev->ops->serdes_config)
+ dev->ops->serdes_config(dev, port, mode, state);
+}
+EXPORT_SYMBOL(b53_phylink_mac_config);
+
+void b53_phylink_mac_an_restart(struct dsa_switch *ds, int port)
+{
+ struct b53_device *dev = ds->priv;
+
+ if (dev->ops->serdes_an_restart)
+ dev->ops->serdes_an_restart(dev, port);
+}
+EXPORT_SYMBOL(b53_phylink_mac_an_restart);
+
+void b53_phylink_mac_link_down(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface)
+{
+ struct b53_device *dev = ds->priv;
+
+ if (mode == MLO_AN_PHY)
+ return;
+
+ if (mode == MLO_AN_FIXED) {
+ b53_force_link(dev, port, false);
+ return;
+ }
+
+ if (phy_interface_mode_is_8023z(interface) &&
+ dev->ops->serdes_link_set)
+ dev->ops->serdes_link_set(dev, port, mode, interface, false);
+}
+EXPORT_SYMBOL(b53_phylink_mac_link_down);
+
+void b53_phylink_mac_link_up(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface,
+ struct phy_device *phydev)
+{
+ struct b53_device *dev = ds->priv;
+
+ if (mode == MLO_AN_PHY)
+ return;
+
+ if (mode == MLO_AN_FIXED) {
+ b53_force_link(dev, port, true);
+ return;
+ }
+
+ if (phy_interface_mode_is_8023z(interface) &&
+ dev->ops->serdes_link_set)
+ dev->ops->serdes_link_set(dev, port, mode, interface, true);
+}
+EXPORT_SYMBOL(b53_phylink_mac_link_up);
+
int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering)
{
return 0;
@@ -1710,6 +1894,12 @@ static const struct dsa_switch_ops b53_switch_ops = {
.phy_read = b53_phy_read16,
.phy_write = b53_phy_write16,
.adjust_link = b53_adjust_link,
+ .phylink_validate = b53_phylink_validate,
+ .phylink_mac_link_state = b53_phylink_mac_link_state,
+ .phylink_mac_config = b53_phylink_mac_config,
+ .phylink_mac_an_restart = b53_phylink_mac_an_restart,
+ .phylink_mac_link_down = b53_phylink_mac_link_down,
+ .phylink_mac_link_up = b53_phylink_mac_link_up,
.port_enable = b53_enable_port,
.port_disable = b53_disable_port,
.get_mac_eee = b53_get_mac_eee,
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index df149756c282..ec796482792d 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -29,6 +29,7 @@
struct b53_device;
struct net_device;
+struct phylink_link_state;
struct b53_io_ops {
int (*read8)(struct b53_device *dev, u8 page, u8 reg, u8 *value);
@@ -43,8 +44,25 @@ struct b53_io_ops {
int (*write64)(struct b53_device *dev, u8 page, u8 reg, u64 value);
int (*phy_read16)(struct b53_device *dev, int addr, int reg, u16 *value);
int (*phy_write16)(struct b53_device *dev, int addr, int reg, u16 value);
+ int (*irq_enable)(struct b53_device *dev, int port);
+ void (*irq_disable)(struct b53_device *dev, int port);
+ u8 (*serdes_map_lane)(struct b53_device *dev, int port);
+ int (*serdes_link_state)(struct b53_device *dev, int port,
+ struct phylink_link_state *state);
+ void (*serdes_config)(struct b53_device *dev, int port,
+ unsigned int mode,
+ const struct phylink_link_state *state);
+ void (*serdes_an_restart)(struct b53_device *dev, int port);
+ void (*serdes_link_set)(struct b53_device *dev, int port,
+ unsigned int mode, phy_interface_t interface,
+ bool link_up);
+ void (*serdes_phylink_validate)(struct b53_device *dev, int port,
+ unsigned long *supported,
+ struct phylink_link_state *state);
};
+#define B53_INVALID_LANE 0xff
+
enum {
BCM5325_DEVICE_ID = 0x25,
BCM5365_DEVICE_ID = 0x65,
@@ -107,6 +125,7 @@ struct b53_device {
/* connect specific data */
u8 current_page;
struct device *dev;
+ u8 serdes_lane;
/* Master MDIO bus we got probed from */
struct mii_bus *bus;
@@ -298,6 +317,23 @@ int b53_br_join(struct dsa_switch *ds, int port, struct net_device *bridge);
void b53_br_leave(struct dsa_switch *ds, int port, struct net_device *bridge);
void b53_br_set_stp_state(struct dsa_switch *ds, int port, u8 state);
void b53_br_fast_age(struct dsa_switch *ds, int port);
+void b53_port_event(struct dsa_switch *ds, int port);
+void b53_phylink_validate(struct dsa_switch *ds, int port,
+ unsigned long *supported,
+ struct phylink_link_state *state);
+int b53_phylink_mac_link_state(struct dsa_switch *ds, int port,
+ struct phylink_link_state *state);
+void b53_phylink_mac_config(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ const struct phylink_link_state *state);
+void b53_phylink_mac_an_restart(struct dsa_switch *ds, int port);
+void b53_phylink_mac_link_down(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface);
+void b53_phylink_mac_link_up(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface,
+ struct phy_device *phydev);
int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering);
int b53_vlan_prepare(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan);
diff --git a/drivers/net/dsa/b53/b53_serdes.c b/drivers/net/dsa/b53/b53_serdes.c
new file mode 100644
index 000000000000..629bf14128a2
--- /dev/null
+++ b/drivers/net/dsa/b53/b53_serdes.c
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause
+/*
+ * Northstar Plus switch SerDes/SGMII PHY main logic
+ *
+ * Copyright (C) 2018 Florian Fainelli <f.fainelli@gmail.com>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/phy.h>
+#include <linux/phylink.h>
+#include <net/dsa.h>
+
+#include "b53_priv.h"
+#include "b53_serdes.h"
+#include "b53_regs.h"
+
+static void b53_serdes_write_blk(struct b53_device *dev, u8 offset, u16 block,
+ u16 value)
+{
+ b53_write16(dev, B53_SERDES_PAGE, B53_SERDES_BLKADDR, block);
+ b53_write16(dev, B53_SERDES_PAGE, offset, value);
+}
+
+static u16 b53_serdes_read_blk(struct b53_device *dev, u8 offset, u16 block)
+{
+ u16 value;
+
+ b53_write16(dev, B53_SERDES_PAGE, B53_SERDES_BLKADDR, block);
+ b53_read16(dev, B53_SERDES_PAGE, offset, &value);
+
+ return value;
+}
+
+static void b53_serdes_set_lane(struct b53_device *dev, u8 lane)
+{
+ if (dev->serdes_lane == lane)
+ return;
+
+ WARN_ON(lane > 1);
+
+ b53_serdes_write_blk(dev, B53_SERDES_LANE,
+ SERDES_XGXSBLK0_BLOCKADDRESS, lane);
+ dev->serdes_lane = lane;
+}
+
+static void b53_serdes_write(struct b53_device *dev, u8 lane,
+ u8 offset, u16 block, u16 value)
+{
+ b53_serdes_set_lane(dev, lane);
+ b53_serdes_write_blk(dev, offset, block, value);
+}
+
+static u16 b53_serdes_read(struct b53_device *dev, u8 lane,
+ u8 offset, u16 block)
+{
+ b53_serdes_set_lane(dev, lane);
+ return b53_serdes_read_blk(dev, offset, block);
+}
+
+void b53_serdes_config(struct b53_device *dev, int port, unsigned int mode,
+ const struct phylink_link_state *state)
+{
+ u8 lane = b53_serdes_map_lane(dev, port);
+ u16 reg;
+
+ if (lane == B53_INVALID_LANE)
+ return;
+
+ reg = b53_serdes_read(dev, lane, B53_SERDES_DIGITAL_CONTROL(1),
+ SERDES_DIGITAL_BLK);
+ if (state->interface == PHY_INTERFACE_MODE_1000BASEX)
+ reg |= FIBER_MODE_1000X;
+ else
+ reg &= ~FIBER_MODE_1000X;
+ b53_serdes_write(dev, lane, B53_SERDES_DIGITAL_CONTROL(1),
+ SERDES_DIGITAL_BLK, reg);
+}
+EXPORT_SYMBOL(b53_serdes_config);
+
+void b53_serdes_an_restart(struct b53_device *dev, int port)
+{
+ u8 lane = b53_serdes_map_lane(dev, port);
+ u16 reg;
+
+ if (lane == B53_INVALID_LANE)
+ return;
+
+ reg = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_BMCR),
+ SERDES_MII_BLK);
+ reg |= BMCR_ANRESTART;
+ b53_serdes_write(dev, lane, B53_SERDES_MII_REG(MII_BMCR),
+ SERDES_MII_BLK, reg);
+}
+EXPORT_SYMBOL(b53_serdes_an_restart);
+
+int b53_serdes_link_state(struct b53_device *dev, int port,
+ struct phylink_link_state *state)
+{
+ u8 lane = b53_serdes_map_lane(dev, port);
+ u16 dig, bmsr;
+
+ if (lane == B53_INVALID_LANE)
+ return 1;
+
+ dig = b53_serdes_read(dev, lane, B53_SERDES_DIGITAL_STATUS,
+ SERDES_DIGITAL_BLK);
+ bmsr = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_BMSR),
+ SERDES_MII_BLK);
+
+ switch ((dig >> SPEED_STATUS_SHIFT) & SPEED_STATUS_MASK) {
+ case SPEED_STATUS_10:
+ state->speed = SPEED_10;
+ break;
+ case SPEED_STATUS_100:
+ state->speed = SPEED_100;
+ break;
+ case SPEED_STATUS_1000:
+ state->speed = SPEED_1000;
+ break;
+ default:
+ case SPEED_STATUS_2500:
+ state->speed = SPEED_2500;
+ break;
+ }
+
+ state->duplex = dig & DUPLEX_STATUS ? DUPLEX_FULL : DUPLEX_HALF;
+ state->an_complete = !!(bmsr & BMSR_ANEGCOMPLETE);
+ state->link = !!(dig & LINK_STATUS);
+ if (dig & PAUSE_RESOLUTION_RX_SIDE)
+ state->pause |= MLO_PAUSE_RX;
+ if (dig & PAUSE_RESOLUTION_TX_SIDE)
+ state->pause |= MLO_PAUSE_TX;
+
+ return 0;
+}
+EXPORT_SYMBOL(b53_serdes_link_state);
+
+void b53_serdes_link_set(struct b53_device *dev, int port, unsigned int mode,
+ phy_interface_t interface, bool link_up)
+{
+ u8 lane = b53_serdes_map_lane(dev, port);
+ u16 reg;
+
+ if (lane == B53_INVALID_LANE)
+ return;
+
+ reg = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_BMCR),
+ SERDES_MII_BLK);
+ if (link_up)
+ reg &= ~BMCR_PDOWN;
+ else
+ reg |= BMCR_PDOWN;
+ b53_serdes_write(dev, lane, B53_SERDES_MII_REG(MII_BMCR),
+ SERDES_MII_BLK, reg);
+}
+EXPORT_SYMBOL(b53_serdes_link_set);
+
+void b53_serdes_phylink_validate(struct b53_device *dev, int port,
+ unsigned long *supported,
+ struct phylink_link_state *state)
+{
+ u8 lane = b53_serdes_map_lane(dev, port);
+
+ if (lane == B53_INVALID_LANE)
+ return;
+
+ switch (lane) {
+ case 0:
+ phylink_set(supported, 2500baseX_Full);
+ /* fallthrough */
+ case 1:
+ phylink_set(supported, 1000baseX_Full);
+ break;
+ default:
+ break;
+ }
+}
+EXPORT_SYMBOL(b53_serdes_phylink_validate);
+
+int b53_serdes_init(struct b53_device *dev, int port)
+{
+ u8 lane = b53_serdes_map_lane(dev, port);
+ u16 id0, msb, lsb;
+
+ if (lane == B53_INVALID_LANE)
+ return -EINVAL;
+
+ id0 = b53_serdes_read(dev, lane, B53_SERDES_ID0, SERDES_ID0);
+ msb = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_PHYSID1),
+ SERDES_MII_BLK);
+ lsb = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_PHYSID2),
+ SERDES_MII_BLK);
+ if (id0 == 0 || id0 == 0xffff) {
+ dev_err(dev->dev, "SerDes not initialized, check settings\n");
+ return -ENODEV;
+ }
+
+ dev_info(dev->dev,
+ "SerDes lane %d, model: %d, rev %c%d (OUI: 0x%08x)\n",
+ lane, id0 & SERDES_ID0_MODEL_MASK,
+ (id0 >> SERDES_ID0_REV_LETTER_SHIFT) + 0x41,
+ (id0 >> SERDES_ID0_REV_NUM_SHIFT) & SERDES_ID0_REV_NUM_MASK,
+ (u32)msb << 16 | lsb);
+
+ return 0;
+}
+EXPORT_SYMBOL(b53_serdes_init);
+
+MODULE_AUTHOR("Florian Fainelli <f.fainelli@gmail.com>");
+MODULE_DESCRIPTION("B53 Switch SerDes driver");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/dsa/b53/b53_serdes.h b/drivers/net/dsa/b53/b53_serdes.h
new file mode 100644
index 000000000000..3bb4f91aec9e
--- /dev/null
+++ b/drivers/net/dsa/b53/b53_serdes.h
@@ -0,0 +1,128 @@
+/* SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause
+ *
+ * Northstar Plus switch SerDes/SGMII PHY definitions
+ *
+ * Copyright (C) 2018 Florian Fainelli <f.fainelli@gmail.com>
+ */
+
+#include <linux/phy.h>
+#include <linux/types.h>
+
+/* Non-standard page used to access SerDes PHY registers on NorthStar Plus */
+#define B53_SERDES_PAGE 0x16
+#define B53_SERDES_BLKADDR 0x3e
+#define B53_SERDES_LANE 0x3c
+
+#define B53_SERDES_ID0 0x20
+#define SERDES_ID0_MODEL_MASK 0x3f
+#define SERDES_ID0_REV_NUM_SHIFT 11
+#define SERDES_ID0_REV_NUM_MASK 0x7
+#define SERDES_ID0_REV_LETTER_SHIFT 14
+
+#define B53_SERDES_MII_REG(x) (0x20 + (x) * 2)
+#define B53_SERDES_DIGITAL_CONTROL(x) (0x1e + (x) * 2)
+#define B53_SERDES_DIGITAL_STATUS 0x28
+
+/* SERDES_DIGITAL_CONTROL1 */
+#define FIBER_MODE_1000X BIT(0)
+#define TBI_INTERFACE BIT(1)
+#define SIGNAL_DETECT_EN BIT(2)
+#define INVERT_SIGNAL_DETECT BIT(3)
+#define AUTODET_EN BIT(4)
+#define SGMII_MASTER_MODE BIT(5)
+#define DISABLE_DLL_PWRDOWN BIT(6)
+#define CRC_CHECKER_DIS BIT(7)
+#define COMMA_DET_EN BIT(8)
+#define ZERO_COMMA_DET_EN BIT(9)
+#define REMOTE_LOOPBACK BIT(10)
+#define SEL_RX_PKTS_FOR_CNTR BIT(11)
+#define MASTER_MDIO_PHY_SEL BIT(13)
+#define DISABLE_SIGNAL_DETECT_FLT BIT(14)
+
+/* SERDES_DIGITAL_CONTROL2 */
+#define EN_PARALLEL_DET BIT(0)
+#define DIS_FALSE_LINK BIT(1)
+#define FLT_FORCE_LINK BIT(2)
+#define EN_AUTONEG_ERR_TIMER BIT(3)
+#define DIS_REMOTE_FAULT_SENSING BIT(4)
+#define FORCE_XMIT_DATA BIT(5)
+#define AUTONEG_FAST_TIMERS BIT(6)
+#define DIS_CARRIER_EXTEND BIT(7)
+#define DIS_TRRR_GENERATION BIT(8)
+#define BYPASS_PCS_RX BIT(9)
+#define BYPASS_PCS_TX BIT(10)
+#define TEST_CNTR_EN BIT(11)
+#define TX_PACKET_SEQ_TEST BIT(12)
+#define TX_IDLE_JAM_SEQ_TEST BIT(13)
+#define CLR_BER_CNTR BIT(14)
+
+/* SERDES_DIGITAL_CONTROL3 */
+#define TX_FIFO_RST BIT(0)
+#define FIFO_ELAST_TX_RX_SHIFT 1
+#define FIFO_ELAST_TX_RX_5K 0
+#define FIFO_ELAST_TX_RX_10K 1
+#define FIFO_ELAST_TX_RX_13_5K 2
+#define FIFO_ELAST_TX_RX_18_5K 3
+#define BLOCK_TXEN_MODE BIT(9)
+#define JAM_FALSE_CARRIER_MODE BIT(10)
+#define EXT_PHY_CRS_MODE BIT(11)
+#define INVERT_EXT_PHY_CRS BIT(12)
+#define DISABLE_TX_CRS BIT(13)
+
+/* SERDES_DIGITAL_STATUS */
+#define SGMII_MODE BIT(0)
+#define LINK_STATUS BIT(1)
+#define DUPLEX_STATUS BIT(2)
+#define SPEED_STATUS_SHIFT 3
+#define SPEED_STATUS_10 0
+#define SPEED_STATUS_100 1
+#define SPEED_STATUS_1000 2
+#define SPEED_STATUS_2500 3
+#define SPEED_STATUS_MASK SPEED_STATUS_2500
+#define PAUSE_RESOLUTION_TX_SIDE BIT(5)
+#define PAUSE_RESOLUTION_RX_SIDE BIT(6)
+#define LINK_STATUS_CHANGE BIT(7)
+#define EARLY_END_EXT_DET BIT(8)
+#define CARRIER_EXT_ERR_DET BIT(9)
+#define RX_ERR_DET BIT(10)
+#define TX_ERR_DET BIT(11)
+#define CRC_ERR_DET BIT(12)
+#define FALSE_CARRIER_ERR_DET BIT(13)
+#define RXFIFO_ERR_DET BIT(14)
+#define TXFIFO_ERR_DET BIT(15)
+
+/* Block offsets */
+#define SERDES_DIGITAL_BLK 0x8300
+#define SERDES_ID0 0x8310
+#define SERDES_MII_BLK 0xffe0
+#define SERDES_XGXSBLK0_BLOCKADDRESS 0xffd0
+
+struct phylink_link_state;
+
+static inline u8 b53_serdes_map_lane(struct b53_device *dev, int port)
+{
+ if (!dev->ops->serdes_map_lane)
+ return B53_INVALID_LANE;
+
+ return dev->ops->serdes_map_lane(dev, port);
+}
+
+int b53_serdes_get_link(struct b53_device *dev, int port);
+int b53_serdes_link_state(struct b53_device *dev, int port,
+ struct phylink_link_state *state);
+void b53_serdes_config(struct b53_device *dev, int port, unsigned int mode,
+ const struct phylink_link_state *state);
+void b53_serdes_an_restart(struct b53_device *dev, int port);
+void b53_serdes_link_set(struct b53_device *dev, int port, unsigned int mode,
+ phy_interface_t interface, bool link_up);
+void b53_serdes_phylink_validate(struct b53_device *dev, int port,
+ unsigned long *supported,
+ struct phylink_link_state *state);
+#if IS_ENABLED(CONFIG_B53_SERDES)
+int b53_serdes_init(struct b53_device *dev, int port);
+#else
+static inline int b53_serdes_init(struct b53_device *dev, int port)
+{
+ return -ENODEV;
+}
+#endif
diff --git a/drivers/net/dsa/b53/b53_srab.c b/drivers/net/dsa/b53/b53_srab.c
index 91de2ba99ad1..90f514252987 100644
--- a/drivers/net/dsa/b53/b53_srab.c
+++ b/drivers/net/dsa/b53/b53_srab.c
@@ -19,11 +19,13 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/delay.h>
+#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/platform_data/b53.h>
#include <linux/of.h>
#include "b53_priv.h"
+#include "b53_serdes.h"
/* command and status register of the SRAB */
#define B53_SRAB_CMDSTAT 0x2c
@@ -47,6 +49,7 @@
/* command and status register of the SRAB */
#define B53_SRAB_CTRLS 0x40
+#define B53_SRAB_CTRLS_HOST_INTR BIT(1)
#define B53_SRAB_CTRLS_RCAREQ BIT(3)
#define B53_SRAB_CTRLS_RCAGNT BIT(4)
#define B53_SRAB_CTRLS_SW_INIT_DONE BIT(6)
@@ -60,8 +63,29 @@
#define B53_SRAB_P7_SLEEP_TIMER BIT(11)
#define B53_SRAB_IMP0_SLEEP_TIMER BIT(12)
+/* Port mux configuration registers */
+#define B53_MUX_CONFIG_P5 0x00
+#define MUX_CONFIG_SGMII 0
+#define MUX_CONFIG_MII_LITE 1
+#define MUX_CONFIG_RGMII 2
+#define MUX_CONFIG_GMII 3
+#define MUX_CONFIG_GPHY 4
+#define MUX_CONFIG_INTERNAL 5
+#define MUX_CONFIG_MASK 0x7
+#define B53_MUX_CONFIG_P4 0x04
+
+struct b53_srab_port_priv {
+ int irq;
+ bool irq_enabled;
+ struct b53_device *dev;
+ unsigned int num;
+ phy_interface_t mode;
+};
+
struct b53_srab_priv {
void __iomem *regs;
+ void __iomem *mux_config;
+ struct b53_srab_port_priv port_intrs[B53_N_PORTS];
};
static int b53_srab_request_grant(struct b53_device *dev)
@@ -344,6 +368,81 @@ err:
return ret;
}
+static irqreturn_t b53_srab_port_thread(int irq, void *dev_id)
+{
+ struct b53_srab_port_priv *port = dev_id;
+ struct b53_device *dev = port->dev;
+
+ if (port->mode == PHY_INTERFACE_MODE_SGMII)
+ b53_port_event(dev->ds, port->num);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t b53_srab_port_isr(int irq, void *dev_id)
+{
+ struct b53_srab_port_priv *port = dev_id;
+ struct b53_device *dev = port->dev;
+ struct b53_srab_priv *priv = dev->priv;
+
+ /* Acknowledge the interrupt */
+ writel(BIT(port->num), priv->regs + B53_SRAB_INTR);
+
+ return IRQ_WAKE_THREAD;
+}
+
+#if IS_ENABLED(CONFIG_B53_SERDES)
+static u8 b53_srab_serdes_map_lane(struct b53_device *dev, int port)
+{
+ struct b53_srab_priv *priv = dev->priv;
+ struct b53_srab_port_priv *p = &priv->port_intrs[port];
+
+ if (p->mode != PHY_INTERFACE_MODE_SGMII)
+ return B53_INVALID_LANE;
+
+ switch (port) {
+ case 5:
+ return 0;
+ case 4:
+ return 1;
+ default:
+ return B53_INVALID_LANE;
+ }
+}
+#endif
+
+static int b53_srab_irq_enable(struct b53_device *dev, int port)
+{
+ struct b53_srab_priv *priv = dev->priv;
+ struct b53_srab_port_priv *p = &priv->port_intrs[port];
+ int ret = 0;
+
+ /* Interrupt is optional and was not specified, do not make
+ * this fatal
+ */
+ if (p->irq == -ENXIO)
+ return ret;
+
+ ret = request_threaded_irq(p->irq, b53_srab_port_isr,
+ b53_srab_port_thread, 0,
+ dev_name(dev->dev), p);
+ if (!ret)
+ p->irq_enabled = true;
+
+ return ret;
+}
+
+static void b53_srab_irq_disable(struct b53_device *dev, int port)
+{
+ struct b53_srab_priv *priv = dev->priv;
+ struct b53_srab_port_priv *p = &priv->port_intrs[port];
+
+ if (p->irq_enabled) {
+ free_irq(p->irq, p);
+ p->irq_enabled = false;
+ }
+}
+
static const struct b53_io_ops b53_srab_ops = {
.read8 = b53_srab_read8,
.read16 = b53_srab_read16,
@@ -355,6 +454,16 @@ static const struct b53_io_ops b53_srab_ops = {
.write32 = b53_srab_write32,
.write48 = b53_srab_write48,
.write64 = b53_srab_write64,
+ .irq_enable = b53_srab_irq_enable,
+ .irq_disable = b53_srab_irq_disable,
+#if IS_ENABLED(CONFIG_B53_SERDES)
+ .serdes_map_lane = b53_srab_serdes_map_lane,
+ .serdes_link_state = b53_serdes_link_state,
+ .serdes_config = b53_serdes_config,
+ .serdes_an_restart = b53_serdes_an_restart,
+ .serdes_link_set = b53_serdes_link_set,
+ .serdes_phylink_validate = b53_serdes_phylink_validate,
+#endif
};
static const struct of_device_id b53_srab_of_match[] = {
@@ -379,6 +488,107 @@ static const struct of_device_id b53_srab_of_match[] = {
};
MODULE_DEVICE_TABLE(of, b53_srab_of_match);
+static void b53_srab_intr_set(struct b53_srab_priv *priv, bool set)
+{
+ u32 reg;
+
+ reg = readl(priv->regs + B53_SRAB_CTRLS);
+ if (set)
+ reg |= B53_SRAB_CTRLS_HOST_INTR;
+ else
+ reg &= ~B53_SRAB_CTRLS_HOST_INTR;
+ writel(reg, priv->regs + B53_SRAB_CTRLS);
+}
+
+static void b53_srab_prepare_irq(struct platform_device *pdev)
+{
+ struct b53_device *dev = platform_get_drvdata(pdev);
+ struct b53_srab_priv *priv = dev->priv;
+ struct b53_srab_port_priv *port;
+ unsigned int i;
+ char *name;
+
+ /* Clear all pending interrupts */
+ writel(0xffffffff, priv->regs + B53_SRAB_INTR);
+
+ if (dev->pdata && dev->pdata->chip_id != BCM58XX_DEVICE_ID)
+ return;
+
+ for (i = 0; i < B53_N_PORTS; i++) {
+ port = &priv->port_intrs[i];
+
+ /* There is no port 6 */
+ if (i == 6)
+ continue;
+
+ name = kasprintf(GFP_KERNEL, "link_state_p%d", i);
+ if (!name)
+ return;
+
+ port->num = i;
+ port->dev = dev;
+ port->irq = platform_get_irq_byname(pdev, name);
+ kfree(name);
+ }
+
+ b53_srab_intr_set(priv, true);
+}
+
+static void b53_srab_mux_init(struct platform_device *pdev)
+{
+ struct b53_device *dev = platform_get_drvdata(pdev);
+ struct b53_srab_priv *priv = dev->priv;
+ struct b53_srab_port_priv *p;
+ struct resource *r;
+ unsigned int port;
+ u32 reg, off = 0;
+ int ret;
+
+ if (dev->pdata && dev->pdata->chip_id != BCM58XX_DEVICE_ID)
+ return;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ priv->mux_config = devm_ioremap_resource(&pdev->dev, r);
+ if (IS_ERR(priv->mux_config))
+ return;
+
+ /* Obtain the port mux configuration so we know which lanes
+ * actually map to SerDes lanes
+ */
+ for (port = 5; port > 3; port--, off += 4) {
+ p = &priv->port_intrs[port];
+
+ reg = readl(priv->mux_config + B53_MUX_CONFIG_P5 + off);
+ switch (reg & MUX_CONFIG_MASK) {
+ case MUX_CONFIG_SGMII:
+ p->mode = PHY_INTERFACE_MODE_SGMII;
+ ret = b53_serdes_init(dev, port);
+ if (ret)
+ continue;
+ break;
+ case MUX_CONFIG_MII_LITE:
+ p->mode = PHY_INTERFACE_MODE_MII;
+ break;
+ case MUX_CONFIG_GMII:
+ p->mode = PHY_INTERFACE_MODE_GMII;
+ break;
+ case MUX_CONFIG_RGMII:
+ p->mode = PHY_INTERFACE_MODE_RGMII;
+ break;
+ case MUX_CONFIG_INTERNAL:
+ p->mode = PHY_INTERFACE_MODE_INTERNAL;
+ break;
+ default:
+ p->mode = PHY_INTERFACE_MODE_NA;
+ break;
+ }
+
+ if (p->mode != PHY_INTERFACE_MODE_NA)
+ dev_info(&pdev->dev, "Port %d mode: %s\n",
+ port, phy_modes(p->mode));
+ }
+}
+
static int b53_srab_probe(struct platform_device *pdev)
{
struct b53_platform_data *pdata = pdev->dev.platform_data;
@@ -417,13 +627,18 @@ static int b53_srab_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, dev);
+ b53_srab_prepare_irq(pdev);
+ b53_srab_mux_init(pdev);
+
return b53_switch_register(dev);
}
static int b53_srab_remove(struct platform_device *pdev)
{
struct b53_device *dev = platform_get_drvdata(pdev);
+ struct b53_srab_priv *priv = dev->priv;
+ b53_srab_intr_set(priv, false);
if (dev)
b53_switch_remove(dev);
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index e0066adcd2f3..1fc27e149e7f 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -465,8 +465,7 @@ static int bcm_sf2_mdio_register(struct dsa_switch *ds)
static void bcm_sf2_mdio_unregister(struct bcm_sf2_priv *priv)
{
mdiobus_unregister(priv->slave_mii_bus);
- if (priv->master_mii_dn)
- of_node_put(priv->master_mii_dn);
+ of_node_put(priv->master_mii_dn);
}
static u32 bcm_sf2_sw_get_phy_flags(struct dsa_switch *ds, int port)
diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
new file mode 100644
index 000000000000..693a67f45bef
--- /dev/null
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -0,0 +1,1167 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Lantiq / Intel GSWIP switch driver for VRX200 SoCs
+ *
+ * Copyright (C) 2010 Lantiq Deutschland
+ * Copyright (C) 2012 John Crispin <john@phrozen.org>
+ * Copyright (C) 2017 - 2018 Hauke Mehrtens <hauke@hauke-m.de>
+ */
+
+#include <linux/clk.h>
+#include <linux/etherdevice.h>
+#include <linux/firmware.h>
+#include <linux/if_bridge.h>
+#include <linux/if_vlan.h>
+#include <linux/iopoll.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_mdio.h>
+#include <linux/of_net.h>
+#include <linux/of_platform.h>
+#include <linux/phy.h>
+#include <linux/phylink.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <net/dsa.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+#include "lantiq_pce.h"
+
+/* GSWIP MDIO Registers */
+#define GSWIP_MDIO_GLOB 0x00
+#define GSWIP_MDIO_GLOB_ENABLE BIT(15)
+#define GSWIP_MDIO_CTRL 0x08
+#define GSWIP_MDIO_CTRL_BUSY BIT(12)
+#define GSWIP_MDIO_CTRL_RD BIT(11)
+#define GSWIP_MDIO_CTRL_WR BIT(10)
+#define GSWIP_MDIO_CTRL_PHYAD_MASK 0x1f
+#define GSWIP_MDIO_CTRL_PHYAD_SHIFT 5
+#define GSWIP_MDIO_CTRL_REGAD_MASK 0x1f
+#define GSWIP_MDIO_READ 0x09
+#define GSWIP_MDIO_WRITE 0x0A
+#define GSWIP_MDIO_MDC_CFG0 0x0B
+#define GSWIP_MDIO_MDC_CFG1 0x0C
+#define GSWIP_MDIO_PHYp(p) (0x15 - (p))
+#define GSWIP_MDIO_PHY_LINK_MASK 0x6000
+#define GSWIP_MDIO_PHY_LINK_AUTO 0x0000
+#define GSWIP_MDIO_PHY_LINK_DOWN 0x4000
+#define GSWIP_MDIO_PHY_LINK_UP 0x2000
+#define GSWIP_MDIO_PHY_SPEED_MASK 0x1800
+#define GSWIP_MDIO_PHY_SPEED_AUTO 0x1800
+#define GSWIP_MDIO_PHY_SPEED_M10 0x0000
+#define GSWIP_MDIO_PHY_SPEED_M100 0x0800
+#define GSWIP_MDIO_PHY_SPEED_G1 0x1000
+#define GSWIP_MDIO_PHY_FDUP_MASK 0x0600
+#define GSWIP_MDIO_PHY_FDUP_AUTO 0x0000
+#define GSWIP_MDIO_PHY_FDUP_EN 0x0200
+#define GSWIP_MDIO_PHY_FDUP_DIS 0x0600
+#define GSWIP_MDIO_PHY_FCONTX_MASK 0x0180
+#define GSWIP_MDIO_PHY_FCONTX_AUTO 0x0000
+#define GSWIP_MDIO_PHY_FCONTX_EN 0x0100
+#define GSWIP_MDIO_PHY_FCONTX_DIS 0x0180
+#define GSWIP_MDIO_PHY_FCONRX_MASK 0x0060
+#define GSWIP_MDIO_PHY_FCONRX_AUTO 0x0000
+#define GSWIP_MDIO_PHY_FCONRX_EN 0x0020
+#define GSWIP_MDIO_PHY_FCONRX_DIS 0x0060
+#define GSWIP_MDIO_PHY_ADDR_MASK 0x001f
+#define GSWIP_MDIO_PHY_MASK (GSWIP_MDIO_PHY_ADDR_MASK | \
+ GSWIP_MDIO_PHY_FCONRX_MASK | \
+ GSWIP_MDIO_PHY_FCONTX_MASK | \
+ GSWIP_MDIO_PHY_LINK_MASK | \
+ GSWIP_MDIO_PHY_SPEED_MASK | \
+ GSWIP_MDIO_PHY_FDUP_MASK)
+
+/* GSWIP MII Registers */
+#define GSWIP_MII_CFG0 0x00
+#define GSWIP_MII_CFG1 0x02
+#define GSWIP_MII_CFG5 0x04
+#define GSWIP_MII_CFG_EN BIT(14)
+#define GSWIP_MII_CFG_LDCLKDIS BIT(12)
+#define GSWIP_MII_CFG_MODE_MIIP 0x0
+#define GSWIP_MII_CFG_MODE_MIIM 0x1
+#define GSWIP_MII_CFG_MODE_RMIIP 0x2
+#define GSWIP_MII_CFG_MODE_RMIIM 0x3
+#define GSWIP_MII_CFG_MODE_RGMII 0x4
+#define GSWIP_MII_CFG_MODE_MASK 0xf
+#define GSWIP_MII_CFG_RATE_M2P5 0x00
+#define GSWIP_MII_CFG_RATE_M25 0x10
+#define GSWIP_MII_CFG_RATE_M125 0x20
+#define GSWIP_MII_CFG_RATE_M50 0x30
+#define GSWIP_MII_CFG_RATE_AUTO 0x40
+#define GSWIP_MII_CFG_RATE_MASK 0x70
+#define GSWIP_MII_PCDU0 0x01
+#define GSWIP_MII_PCDU1 0x03
+#define GSWIP_MII_PCDU5 0x05
+#define GSWIP_MII_PCDU_TXDLY_MASK GENMASK(2, 0)
+#define GSWIP_MII_PCDU_RXDLY_MASK GENMASK(9, 7)
+
+/* GSWIP Core Registers */
+#define GSWIP_SWRES 0x000
+#define GSWIP_SWRES_R1 BIT(1) /* GSWIP Software reset */
+#define GSWIP_SWRES_R0 BIT(0) /* GSWIP Hardware reset */
+#define GSWIP_VERSION 0x013
+#define GSWIP_VERSION_REV_SHIFT 0
+#define GSWIP_VERSION_REV_MASK GENMASK(7, 0)
+#define GSWIP_VERSION_MOD_SHIFT 8
+#define GSWIP_VERSION_MOD_MASK GENMASK(15, 8)
+#define GSWIP_VERSION_2_0 0x100
+#define GSWIP_VERSION_2_1 0x021
+#define GSWIP_VERSION_2_2 0x122
+#define GSWIP_VERSION_2_2_ETC 0x022
+
+#define GSWIP_BM_RAM_VAL(x) (0x043 - (x))
+#define GSWIP_BM_RAM_ADDR 0x044
+#define GSWIP_BM_RAM_CTRL 0x045
+#define GSWIP_BM_RAM_CTRL_BAS BIT(15)
+#define GSWIP_BM_RAM_CTRL_OPMOD BIT(5)
+#define GSWIP_BM_RAM_CTRL_ADDR_MASK GENMASK(4, 0)
+#define GSWIP_BM_QUEUE_GCTRL 0x04A
+#define GSWIP_BM_QUEUE_GCTRL_GL_MOD BIT(10)
+/* buffer management Port Configuration Register */
+#define GSWIP_BM_PCFGp(p) (0x080 + ((p) * 2))
+#define GSWIP_BM_PCFG_CNTEN BIT(0) /* RMON Counter Enable */
+#define GSWIP_BM_PCFG_IGCNT BIT(1) /* Ingres Special Tag RMON count */
+/* buffer management Port Control Register */
+#define GSWIP_BM_RMON_CTRLp(p) (0x81 + ((p) * 2))
+#define GSWIP_BM_CTRL_RMON_RAM1_RES BIT(0) /* Software Reset for RMON RAM 1 */
+#define GSWIP_BM_CTRL_RMON_RAM2_RES BIT(1) /* Software Reset for RMON RAM 2 */
+
+/* PCE */
+#define GSWIP_PCE_TBL_KEY(x) (0x447 - (x))
+#define GSWIP_PCE_TBL_MASK 0x448
+#define GSWIP_PCE_TBL_VAL(x) (0x44D - (x))
+#define GSWIP_PCE_TBL_ADDR 0x44E
+#define GSWIP_PCE_TBL_CTRL 0x44F
+#define GSWIP_PCE_TBL_CTRL_BAS BIT(15)
+#define GSWIP_PCE_TBL_CTRL_TYPE BIT(13)
+#define GSWIP_PCE_TBL_CTRL_VLD BIT(12)
+#define GSWIP_PCE_TBL_CTRL_KEYFORM BIT(11)
+#define GSWIP_PCE_TBL_CTRL_GMAP_MASK GENMASK(10, 7)
+#define GSWIP_PCE_TBL_CTRL_OPMOD_MASK GENMASK(6, 5)
+#define GSWIP_PCE_TBL_CTRL_OPMOD_ADRD 0x00
+#define GSWIP_PCE_TBL_CTRL_OPMOD_ADWR 0x20
+#define GSWIP_PCE_TBL_CTRL_OPMOD_KSRD 0x40
+#define GSWIP_PCE_TBL_CTRL_OPMOD_KSWR 0x60
+#define GSWIP_PCE_TBL_CTRL_ADDR_MASK GENMASK(4, 0)
+#define GSWIP_PCE_PMAP1 0x453 /* Monitoring port map */
+#define GSWIP_PCE_PMAP2 0x454 /* Default Multicast port map */
+#define GSWIP_PCE_PMAP3 0x455 /* Default Unknown Unicast port map */
+#define GSWIP_PCE_GCTRL_0 0x456
+#define GSWIP_PCE_GCTRL_0_MC_VALID BIT(3)
+#define GSWIP_PCE_GCTRL_0_VLAN BIT(14) /* VLAN aware Switching */
+#define GSWIP_PCE_GCTRL_1 0x457
+#define GSWIP_PCE_GCTRL_1_MAC_GLOCK BIT(2) /* MAC Address table lock */
+#define GSWIP_PCE_GCTRL_1_MAC_GLOCK_MOD BIT(3) /* Mac address table lock forwarding mode */
+#define GSWIP_PCE_PCTRL_0p(p) (0x480 + ((p) * 0xA))
+#define GSWIP_PCE_PCTRL_0_INGRESS BIT(11)
+#define GSWIP_PCE_PCTRL_0_PSTATE_LISTEN 0x0
+#define GSWIP_PCE_PCTRL_0_PSTATE_RX 0x1
+#define GSWIP_PCE_PCTRL_0_PSTATE_TX 0x2
+#define GSWIP_PCE_PCTRL_0_PSTATE_LEARNING 0x3
+#define GSWIP_PCE_PCTRL_0_PSTATE_FORWARDING 0x7
+#define GSWIP_PCE_PCTRL_0_PSTATE_MASK GENMASK(2, 0)
+
+#define GSWIP_MAC_FLEN 0x8C5
+#define GSWIP_MAC_CTRL_2p(p) (0x905 + ((p) * 0xC))
+#define GSWIP_MAC_CTRL_2_MLEN BIT(3) /* Maximum Untagged Frame Lnegth */
+
+/* Ethernet Switch Fetch DMA Port Control Register */
+#define GSWIP_FDMA_PCTRLp(p) (0xA80 + ((p) * 0x6))
+#define GSWIP_FDMA_PCTRL_EN BIT(0) /* FDMA Port Enable */
+#define GSWIP_FDMA_PCTRL_STEN BIT(1) /* Special Tag Insertion Enable */
+#define GSWIP_FDMA_PCTRL_VLANMOD_MASK GENMASK(4, 3) /* VLAN Modification Control */
+#define GSWIP_FDMA_PCTRL_VLANMOD_SHIFT 3 /* VLAN Modification Control */
+#define GSWIP_FDMA_PCTRL_VLANMOD_DIS (0x0 << GSWIP_FDMA_PCTRL_VLANMOD_SHIFT)
+#define GSWIP_FDMA_PCTRL_VLANMOD_PRIO (0x1 << GSWIP_FDMA_PCTRL_VLANMOD_SHIFT)
+#define GSWIP_FDMA_PCTRL_VLANMOD_ID (0x2 << GSWIP_FDMA_PCTRL_VLANMOD_SHIFT)
+#define GSWIP_FDMA_PCTRL_VLANMOD_BOTH (0x3 << GSWIP_FDMA_PCTRL_VLANMOD_SHIFT)
+
+/* Ethernet Switch Store DMA Port Control Register */
+#define GSWIP_SDMA_PCTRLp(p) (0xBC0 + ((p) * 0x6))
+#define GSWIP_SDMA_PCTRL_EN BIT(0) /* SDMA Port Enable */
+#define GSWIP_SDMA_PCTRL_FCEN BIT(1) /* Flow Control Enable */
+#define GSWIP_SDMA_PCTRL_PAUFWD BIT(1) /* Pause Frame Forwarding */
+
+#define XRX200_GPHY_FW_ALIGN (16 * 1024)
+
+struct gswip_hw_info {
+ int max_ports;
+ int cpu_port;
+};
+
+struct xway_gphy_match_data {
+ char *fe_firmware_name;
+ char *ge_firmware_name;
+};
+
+struct gswip_gphy_fw {
+ struct clk *clk_gate;
+ struct reset_control *reset;
+ u32 fw_addr_offset;
+ char *fw_name;
+};
+
+struct gswip_priv {
+ __iomem void *gswip;
+ __iomem void *mdio;
+ __iomem void *mii;
+ const struct gswip_hw_info *hw_info;
+ const struct xway_gphy_match_data *gphy_fw_name_cfg;
+ struct dsa_switch *ds;
+ struct device *dev;
+ struct regmap *rcu_regmap;
+ int num_gphy_fw;
+ struct gswip_gphy_fw *gphy_fw;
+};
+
+struct gswip_rmon_cnt_desc {
+ unsigned int size;
+ unsigned int offset;
+ const char *name;
+};
+
+#define MIB_DESC(_size, _offset, _name) {.size = _size, .offset = _offset, .name = _name}
+
+static const struct gswip_rmon_cnt_desc gswip_rmon_cnt[] = {
+ /** Receive Packet Count (only packets that are accepted and not discarded). */
+ MIB_DESC(1, 0x1F, "RxGoodPkts"),
+ MIB_DESC(1, 0x23, "RxUnicastPkts"),
+ MIB_DESC(1, 0x22, "RxMulticastPkts"),
+ MIB_DESC(1, 0x21, "RxFCSErrorPkts"),
+ MIB_DESC(1, 0x1D, "RxUnderSizeGoodPkts"),
+ MIB_DESC(1, 0x1E, "RxUnderSizeErrorPkts"),
+ MIB_DESC(1, 0x1B, "RxOversizeGoodPkts"),
+ MIB_DESC(1, 0x1C, "RxOversizeErrorPkts"),
+ MIB_DESC(1, 0x20, "RxGoodPausePkts"),
+ MIB_DESC(1, 0x1A, "RxAlignErrorPkts"),
+ MIB_DESC(1, 0x12, "Rx64BytePkts"),
+ MIB_DESC(1, 0x13, "Rx127BytePkts"),
+ MIB_DESC(1, 0x14, "Rx255BytePkts"),
+ MIB_DESC(1, 0x15, "Rx511BytePkts"),
+ MIB_DESC(1, 0x16, "Rx1023BytePkts"),
+ /** Receive Size 1024-1522 (or more, if configured) Packet Count. */
+ MIB_DESC(1, 0x17, "RxMaxBytePkts"),
+ MIB_DESC(1, 0x18, "RxDroppedPkts"),
+ MIB_DESC(1, 0x19, "RxFilteredPkts"),
+ MIB_DESC(2, 0x24, "RxGoodBytes"),
+ MIB_DESC(2, 0x26, "RxBadBytes"),
+ MIB_DESC(1, 0x11, "TxAcmDroppedPkts"),
+ MIB_DESC(1, 0x0C, "TxGoodPkts"),
+ MIB_DESC(1, 0x06, "TxUnicastPkts"),
+ MIB_DESC(1, 0x07, "TxMulticastPkts"),
+ MIB_DESC(1, 0x00, "Tx64BytePkts"),
+ MIB_DESC(1, 0x01, "Tx127BytePkts"),
+ MIB_DESC(1, 0x02, "Tx255BytePkts"),
+ MIB_DESC(1, 0x03, "Tx511BytePkts"),
+ MIB_DESC(1, 0x04, "Tx1023BytePkts"),
+ /** Transmit Size 1024-1522 (or more, if configured) Packet Count. */
+ MIB_DESC(1, 0x05, "TxMaxBytePkts"),
+ MIB_DESC(1, 0x08, "TxSingleCollCount"),
+ MIB_DESC(1, 0x09, "TxMultCollCount"),
+ MIB_DESC(1, 0x0A, "TxLateCollCount"),
+ MIB_DESC(1, 0x0B, "TxExcessCollCount"),
+ MIB_DESC(1, 0x0D, "TxPauseCount"),
+ MIB_DESC(1, 0x10, "TxDroppedPkts"),
+ MIB_DESC(2, 0x0E, "TxGoodBytes"),
+};
+
+static u32 gswip_switch_r(struct gswip_priv *priv, u32 offset)
+{
+ return __raw_readl(priv->gswip + (offset * 4));
+}
+
+static void gswip_switch_w(struct gswip_priv *priv, u32 val, u32 offset)
+{
+ __raw_writel(val, priv->gswip + (offset * 4));
+}
+
+static void gswip_switch_mask(struct gswip_priv *priv, u32 clear, u32 set,
+ u32 offset)
+{
+ u32 val = gswip_switch_r(priv, offset);
+
+ val &= ~(clear);
+ val |= set;
+ gswip_switch_w(priv, val, offset);
+}
+
+static u32 gswip_switch_r_timeout(struct gswip_priv *priv, u32 offset,
+ u32 cleared)
+{
+ u32 val;
+
+ return readx_poll_timeout(__raw_readl, priv->gswip + (offset * 4), val,
+ (val & cleared) == 0, 20, 50000);
+}
+
+static u32 gswip_mdio_r(struct gswip_priv *priv, u32 offset)
+{
+ return __raw_readl(priv->mdio + (offset * 4));
+}
+
+static void gswip_mdio_w(struct gswip_priv *priv, u32 val, u32 offset)
+{
+ __raw_writel(val, priv->mdio + (offset * 4));
+}
+
+static void gswip_mdio_mask(struct gswip_priv *priv, u32 clear, u32 set,
+ u32 offset)
+{
+ u32 val = gswip_mdio_r(priv, offset);
+
+ val &= ~(clear);
+ val |= set;
+ gswip_mdio_w(priv, val, offset);
+}
+
+static u32 gswip_mii_r(struct gswip_priv *priv, u32 offset)
+{
+ return __raw_readl(priv->mii + (offset * 4));
+}
+
+static void gswip_mii_w(struct gswip_priv *priv, u32 val, u32 offset)
+{
+ __raw_writel(val, priv->mii + (offset * 4));
+}
+
+static void gswip_mii_mask(struct gswip_priv *priv, u32 clear, u32 set,
+ u32 offset)
+{
+ u32 val = gswip_mii_r(priv, offset);
+
+ val &= ~(clear);
+ val |= set;
+ gswip_mii_w(priv, val, offset);
+}
+
+static void gswip_mii_mask_cfg(struct gswip_priv *priv, u32 clear, u32 set,
+ int port)
+{
+ switch (port) {
+ case 0:
+ gswip_mii_mask(priv, clear, set, GSWIP_MII_CFG0);
+ break;
+ case 1:
+ gswip_mii_mask(priv, clear, set, GSWIP_MII_CFG1);
+ break;
+ case 5:
+ gswip_mii_mask(priv, clear, set, GSWIP_MII_CFG5);
+ break;
+ }
+}
+
+static void gswip_mii_mask_pcdu(struct gswip_priv *priv, u32 clear, u32 set,
+ int port)
+{
+ switch (port) {
+ case 0:
+ gswip_mii_mask(priv, clear, set, GSWIP_MII_PCDU0);
+ break;
+ case 1:
+ gswip_mii_mask(priv, clear, set, GSWIP_MII_PCDU1);
+ break;
+ case 5:
+ gswip_mii_mask(priv, clear, set, GSWIP_MII_PCDU5);
+ break;
+ }
+}
+
+static int gswip_mdio_poll(struct gswip_priv *priv)
+{
+ int cnt = 100;
+
+ while (likely(cnt--)) {
+ u32 ctrl = gswip_mdio_r(priv, GSWIP_MDIO_CTRL);
+
+ if ((ctrl & GSWIP_MDIO_CTRL_BUSY) == 0)
+ return 0;
+ usleep_range(20, 40);
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int gswip_mdio_wr(struct mii_bus *bus, int addr, int reg, u16 val)
+{
+ struct gswip_priv *priv = bus->priv;
+ int err;
+
+ err = gswip_mdio_poll(priv);
+ if (err) {
+ dev_err(&bus->dev, "waiting for MDIO bus busy timed out\n");
+ return err;
+ }
+
+ gswip_mdio_w(priv, val, GSWIP_MDIO_WRITE);
+ gswip_mdio_w(priv, GSWIP_MDIO_CTRL_BUSY | GSWIP_MDIO_CTRL_WR |
+ ((addr & GSWIP_MDIO_CTRL_PHYAD_MASK) << GSWIP_MDIO_CTRL_PHYAD_SHIFT) |
+ (reg & GSWIP_MDIO_CTRL_REGAD_MASK),
+ GSWIP_MDIO_CTRL);
+
+ return 0;
+}
+
+static int gswip_mdio_rd(struct mii_bus *bus, int addr, int reg)
+{
+ struct gswip_priv *priv = bus->priv;
+ int err;
+
+ err = gswip_mdio_poll(priv);
+ if (err) {
+ dev_err(&bus->dev, "waiting for MDIO bus busy timed out\n");
+ return err;
+ }
+
+ gswip_mdio_w(priv, GSWIP_MDIO_CTRL_BUSY | GSWIP_MDIO_CTRL_RD |
+ ((addr & GSWIP_MDIO_CTRL_PHYAD_MASK) << GSWIP_MDIO_CTRL_PHYAD_SHIFT) |
+ (reg & GSWIP_MDIO_CTRL_REGAD_MASK),
+ GSWIP_MDIO_CTRL);
+
+ err = gswip_mdio_poll(priv);
+ if (err) {
+ dev_err(&bus->dev, "waiting for MDIO bus busy timed out\n");
+ return err;
+ }
+
+ return gswip_mdio_r(priv, GSWIP_MDIO_READ);
+}
+
+static int gswip_mdio(struct gswip_priv *priv, struct device_node *mdio_np)
+{
+ struct dsa_switch *ds = priv->ds;
+
+ ds->slave_mii_bus = devm_mdiobus_alloc(priv->dev);
+ if (!ds->slave_mii_bus)
+ return -ENOMEM;
+
+ ds->slave_mii_bus->priv = priv;
+ ds->slave_mii_bus->read = gswip_mdio_rd;
+ ds->slave_mii_bus->write = gswip_mdio_wr;
+ ds->slave_mii_bus->name = "lantiq,xrx200-mdio";
+ snprintf(ds->slave_mii_bus->id, MII_BUS_ID_SIZE, "%s-mii",
+ dev_name(priv->dev));
+ ds->slave_mii_bus->parent = priv->dev;
+ ds->slave_mii_bus->phy_mask = ~ds->phys_mii_mask;
+
+ return of_mdiobus_register(ds->slave_mii_bus, mdio_np);
+}
+
+static int gswip_port_enable(struct dsa_switch *ds, int port,
+ struct phy_device *phydev)
+{
+ struct gswip_priv *priv = ds->priv;
+
+ /* RMON Counter Enable for port */
+ gswip_switch_w(priv, GSWIP_BM_PCFG_CNTEN, GSWIP_BM_PCFGp(port));
+
+ /* enable port fetch/store dma & VLAN Modification */
+ gswip_switch_mask(priv, 0, GSWIP_FDMA_PCTRL_EN |
+ GSWIP_FDMA_PCTRL_VLANMOD_BOTH,
+ GSWIP_FDMA_PCTRLp(port));
+ gswip_switch_mask(priv, 0, GSWIP_SDMA_PCTRL_EN,
+ GSWIP_SDMA_PCTRLp(port));
+ gswip_switch_mask(priv, 0, GSWIP_PCE_PCTRL_0_INGRESS,
+ GSWIP_PCE_PCTRL_0p(port));
+
+ if (!dsa_is_cpu_port(ds, port)) {
+ u32 macconf = GSWIP_MDIO_PHY_LINK_AUTO |
+ GSWIP_MDIO_PHY_SPEED_AUTO |
+ GSWIP_MDIO_PHY_FDUP_AUTO |
+ GSWIP_MDIO_PHY_FCONTX_AUTO |
+ GSWIP_MDIO_PHY_FCONRX_AUTO |
+ (phydev->mdio.addr & GSWIP_MDIO_PHY_ADDR_MASK);
+
+ gswip_mdio_w(priv, macconf, GSWIP_MDIO_PHYp(port));
+ /* Activate MDIO auto polling */
+ gswip_mdio_mask(priv, 0, BIT(port), GSWIP_MDIO_MDC_CFG0);
+ }
+
+ return 0;
+}
+
+static void gswip_port_disable(struct dsa_switch *ds, int port,
+ struct phy_device *phy)
+{
+ struct gswip_priv *priv = ds->priv;
+
+ if (!dsa_is_cpu_port(ds, port)) {
+ gswip_mdio_mask(priv, GSWIP_MDIO_PHY_LINK_DOWN,
+ GSWIP_MDIO_PHY_LINK_MASK,
+ GSWIP_MDIO_PHYp(port));
+ /* Deactivate MDIO auto polling */
+ gswip_mdio_mask(priv, BIT(port), 0, GSWIP_MDIO_MDC_CFG0);
+ }
+
+ gswip_switch_mask(priv, GSWIP_FDMA_PCTRL_EN, 0,
+ GSWIP_FDMA_PCTRLp(port));
+ gswip_switch_mask(priv, GSWIP_SDMA_PCTRL_EN, 0,
+ GSWIP_SDMA_PCTRLp(port));
+}
+
+static int gswip_pce_load_microcode(struct gswip_priv *priv)
+{
+ int i;
+ int err;
+
+ gswip_switch_mask(priv, GSWIP_PCE_TBL_CTRL_ADDR_MASK |
+ GSWIP_PCE_TBL_CTRL_OPMOD_MASK,
+ GSWIP_PCE_TBL_CTRL_OPMOD_ADWR, GSWIP_PCE_TBL_CTRL);
+ gswip_switch_w(priv, 0, GSWIP_PCE_TBL_MASK);
+
+ for (i = 0; i < ARRAY_SIZE(gswip_pce_microcode); i++) {
+ gswip_switch_w(priv, i, GSWIP_PCE_TBL_ADDR);
+ gswip_switch_w(priv, gswip_pce_microcode[i].val_0,
+ GSWIP_PCE_TBL_VAL(0));
+ gswip_switch_w(priv, gswip_pce_microcode[i].val_1,
+ GSWIP_PCE_TBL_VAL(1));
+ gswip_switch_w(priv, gswip_pce_microcode[i].val_2,
+ GSWIP_PCE_TBL_VAL(2));
+ gswip_switch_w(priv, gswip_pce_microcode[i].val_3,
+ GSWIP_PCE_TBL_VAL(3));
+
+ /* start the table access: */
+ gswip_switch_mask(priv, 0, GSWIP_PCE_TBL_CTRL_BAS,
+ GSWIP_PCE_TBL_CTRL);
+ err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL,
+ GSWIP_PCE_TBL_CTRL_BAS);
+ if (err)
+ return err;
+ }
+
+ /* tell the switch that the microcode is loaded */
+ gswip_switch_mask(priv, 0, GSWIP_PCE_GCTRL_0_MC_VALID,
+ GSWIP_PCE_GCTRL_0);
+
+ return 0;
+}
+
+static int gswip_setup(struct dsa_switch *ds)
+{
+ struct gswip_priv *priv = ds->priv;
+ unsigned int cpu_port = priv->hw_info->cpu_port;
+ int i;
+ int err;
+
+ gswip_switch_w(priv, GSWIP_SWRES_R0, GSWIP_SWRES);
+ usleep_range(5000, 10000);
+ gswip_switch_w(priv, 0, GSWIP_SWRES);
+
+ /* disable port fetch/store dma on all ports */
+ for (i = 0; i < priv->hw_info->max_ports; i++)
+ gswip_port_disable(ds, i, NULL);
+
+ /* enable Switch */
+ gswip_mdio_mask(priv, 0, GSWIP_MDIO_GLOB_ENABLE, GSWIP_MDIO_GLOB);
+
+ err = gswip_pce_load_microcode(priv);
+ if (err) {
+ dev_err(priv->dev, "writing PCE microcode failed, %i", err);
+ return err;
+ }
+
+ /* Default unknown Broadcast/Multicast/Unicast port maps */
+ gswip_switch_w(priv, BIT(cpu_port), GSWIP_PCE_PMAP1);
+ gswip_switch_w(priv, BIT(cpu_port), GSWIP_PCE_PMAP2);
+ gswip_switch_w(priv, BIT(cpu_port), GSWIP_PCE_PMAP3);
+
+ /* disable PHY auto polling */
+ gswip_mdio_w(priv, 0x0, GSWIP_MDIO_MDC_CFG0);
+ /* Configure the MDIO Clock 2.5 MHz */
+ gswip_mdio_mask(priv, 0xff, 0x09, GSWIP_MDIO_MDC_CFG1);
+
+ /* Disable the xMII link */
+ gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_EN, 0, 0);
+ gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_EN, 0, 1);
+ gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_EN, 0, 5);
+
+ /* enable special tag insertion on cpu port */
+ gswip_switch_mask(priv, 0, GSWIP_FDMA_PCTRL_STEN,
+ GSWIP_FDMA_PCTRLp(cpu_port));
+
+ gswip_switch_mask(priv, 0, GSWIP_MAC_CTRL_2_MLEN,
+ GSWIP_MAC_CTRL_2p(cpu_port));
+ gswip_switch_w(priv, VLAN_ETH_FRAME_LEN + 8, GSWIP_MAC_FLEN);
+ gswip_switch_mask(priv, 0, GSWIP_BM_QUEUE_GCTRL_GL_MOD,
+ GSWIP_BM_QUEUE_GCTRL);
+
+ /* VLAN aware Switching */
+ gswip_switch_mask(priv, 0, GSWIP_PCE_GCTRL_0_VLAN, GSWIP_PCE_GCTRL_0);
+
+ /* Mac Address Table Lock */
+ gswip_switch_mask(priv, 0, GSWIP_PCE_GCTRL_1_MAC_GLOCK |
+ GSWIP_PCE_GCTRL_1_MAC_GLOCK_MOD,
+ GSWIP_PCE_GCTRL_1);
+
+ gswip_port_enable(ds, cpu_port, NULL);
+ return 0;
+}
+
+static enum dsa_tag_protocol gswip_get_tag_protocol(struct dsa_switch *ds,
+ int port)
+{
+ return DSA_TAG_PROTO_GSWIP;
+}
+
+static void gswip_phylink_validate(struct dsa_switch *ds, int port,
+ unsigned long *supported,
+ struct phylink_link_state *state)
+{
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
+
+ switch (port) {
+ case 0:
+ case 1:
+ if (!phy_interface_mode_is_rgmii(state->interface) &&
+ state->interface != PHY_INTERFACE_MODE_MII &&
+ state->interface != PHY_INTERFACE_MODE_REVMII &&
+ state->interface != PHY_INTERFACE_MODE_RMII)
+ goto unsupported;
+ break;
+ case 2:
+ case 3:
+ case 4:
+ if (state->interface != PHY_INTERFACE_MODE_INTERNAL)
+ goto unsupported;
+ break;
+ case 5:
+ if (!phy_interface_mode_is_rgmii(state->interface) &&
+ state->interface != PHY_INTERFACE_MODE_INTERNAL)
+ goto unsupported;
+ break;
+ default:
+ bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
+ dev_err(ds->dev, "Unsupported port: %i\n", port);
+ return;
+ }
+
+ /* Allow all the expected bits */
+ phylink_set(mask, Autoneg);
+ phylink_set_port_modes(mask);
+ phylink_set(mask, Pause);
+ phylink_set(mask, Asym_Pause);
+
+ /* With the exclusion of MII and Reverse MII, we support Gigabit,
+ * including Half duplex
+ */
+ if (state->interface != PHY_INTERFACE_MODE_MII &&
+ state->interface != PHY_INTERFACE_MODE_REVMII) {
+ phylink_set(mask, 1000baseT_Full);
+ phylink_set(mask, 1000baseT_Half);
+ }
+
+ phylink_set(mask, 10baseT_Half);
+ phylink_set(mask, 10baseT_Full);
+ phylink_set(mask, 100baseT_Half);
+ phylink_set(mask, 100baseT_Full);
+
+ bitmap_and(supported, supported, mask,
+ __ETHTOOL_LINK_MODE_MASK_NBITS);
+ bitmap_and(state->advertising, state->advertising, mask,
+ __ETHTOOL_LINK_MODE_MASK_NBITS);
+ return;
+
+unsupported:
+ bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
+ dev_err(ds->dev, "Unsupported interface: %d\n", state->interface);
+ return;
+}
+
+static void gswip_phylink_mac_config(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ const struct phylink_link_state *state)
+{
+ struct gswip_priv *priv = ds->priv;
+ u32 miicfg = 0;
+
+ miicfg |= GSWIP_MII_CFG_LDCLKDIS;
+
+ switch (state->interface) {
+ case PHY_INTERFACE_MODE_MII:
+ case PHY_INTERFACE_MODE_INTERNAL:
+ miicfg |= GSWIP_MII_CFG_MODE_MIIM;
+ break;
+ case PHY_INTERFACE_MODE_REVMII:
+ miicfg |= GSWIP_MII_CFG_MODE_MIIP;
+ break;
+ case PHY_INTERFACE_MODE_RMII:
+ miicfg |= GSWIP_MII_CFG_MODE_RMIIM;
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ miicfg |= GSWIP_MII_CFG_MODE_RGMII;
+ break;
+ default:
+ dev_err(ds->dev,
+ "Unsupported interface: %d\n", state->interface);
+ return;
+ }
+ gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_MODE_MASK, miicfg, port);
+
+ switch (state->interface) {
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ gswip_mii_mask_pcdu(priv, GSWIP_MII_PCDU_TXDLY_MASK |
+ GSWIP_MII_PCDU_RXDLY_MASK, 0, port);
+ break;
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ gswip_mii_mask_pcdu(priv, GSWIP_MII_PCDU_RXDLY_MASK, 0, port);
+ break;
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ gswip_mii_mask_pcdu(priv, GSWIP_MII_PCDU_TXDLY_MASK, 0, port);
+ break;
+ default:
+ break;
+ }
+}
+
+static void gswip_phylink_mac_link_down(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface)
+{
+ struct gswip_priv *priv = ds->priv;
+
+ gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_EN, 0, port);
+}
+
+static void gswip_phylink_mac_link_up(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface,
+ struct phy_device *phydev)
+{
+ struct gswip_priv *priv = ds->priv;
+
+ /* Enable the xMII interface only for the external PHY */
+ if (interface != PHY_INTERFACE_MODE_INTERNAL)
+ gswip_mii_mask_cfg(priv, 0, GSWIP_MII_CFG_EN, port);
+}
+
+static void gswip_get_strings(struct dsa_switch *ds, int port, u32 stringset,
+ uint8_t *data)
+{
+ int i;
+
+ if (stringset != ETH_SS_STATS)
+ return;
+
+ for (i = 0; i < ARRAY_SIZE(gswip_rmon_cnt); i++)
+ strncpy(data + i * ETH_GSTRING_LEN, gswip_rmon_cnt[i].name,
+ ETH_GSTRING_LEN);
+}
+
+static u32 gswip_bcm_ram_entry_read(struct gswip_priv *priv, u32 table,
+ u32 index)
+{
+ u32 result;
+ int err;
+
+ gswip_switch_w(priv, index, GSWIP_BM_RAM_ADDR);
+ gswip_switch_mask(priv, GSWIP_BM_RAM_CTRL_ADDR_MASK |
+ GSWIP_BM_RAM_CTRL_OPMOD,
+ table | GSWIP_BM_RAM_CTRL_BAS,
+ GSWIP_BM_RAM_CTRL);
+
+ err = gswip_switch_r_timeout(priv, GSWIP_BM_RAM_CTRL,
+ GSWIP_BM_RAM_CTRL_BAS);
+ if (err) {
+ dev_err(priv->dev, "timeout while reading table: %u, index: %u",
+ table, index);
+ return 0;
+ }
+
+ result = gswip_switch_r(priv, GSWIP_BM_RAM_VAL(0));
+ result |= gswip_switch_r(priv, GSWIP_BM_RAM_VAL(1)) << 16;
+
+ return result;
+}
+
+static void gswip_get_ethtool_stats(struct dsa_switch *ds, int port,
+ uint64_t *data)
+{
+ struct gswip_priv *priv = ds->priv;
+ const struct gswip_rmon_cnt_desc *rmon_cnt;
+ int i;
+ u64 high;
+
+ for (i = 0; i < ARRAY_SIZE(gswip_rmon_cnt); i++) {
+ rmon_cnt = &gswip_rmon_cnt[i];
+
+ data[i] = gswip_bcm_ram_entry_read(priv, port,
+ rmon_cnt->offset);
+ if (rmon_cnt->size == 2) {
+ high = gswip_bcm_ram_entry_read(priv, port,
+ rmon_cnt->offset + 1);
+ data[i] |= high << 32;
+ }
+ }
+}
+
+static int gswip_get_sset_count(struct dsa_switch *ds, int port, int sset)
+{
+ if (sset != ETH_SS_STATS)
+ return 0;
+
+ return ARRAY_SIZE(gswip_rmon_cnt);
+}
+
+static const struct dsa_switch_ops gswip_switch_ops = {
+ .get_tag_protocol = gswip_get_tag_protocol,
+ .setup = gswip_setup,
+ .port_enable = gswip_port_enable,
+ .port_disable = gswip_port_disable,
+ .phylink_validate = gswip_phylink_validate,
+ .phylink_mac_config = gswip_phylink_mac_config,
+ .phylink_mac_link_down = gswip_phylink_mac_link_down,
+ .phylink_mac_link_up = gswip_phylink_mac_link_up,
+ .get_strings = gswip_get_strings,
+ .get_ethtool_stats = gswip_get_ethtool_stats,
+ .get_sset_count = gswip_get_sset_count,
+};
+
+static const struct xway_gphy_match_data xrx200a1x_gphy_data = {
+ .fe_firmware_name = "lantiq/xrx200_phy22f_a14.bin",
+ .ge_firmware_name = "lantiq/xrx200_phy11g_a14.bin",
+};
+
+static const struct xway_gphy_match_data xrx200a2x_gphy_data = {
+ .fe_firmware_name = "lantiq/xrx200_phy22f_a22.bin",
+ .ge_firmware_name = "lantiq/xrx200_phy11g_a22.bin",
+};
+
+static const struct xway_gphy_match_data xrx300_gphy_data = {
+ .fe_firmware_name = "lantiq/xrx300_phy22f_a21.bin",
+ .ge_firmware_name = "lantiq/xrx300_phy11g_a21.bin",
+};
+
+static const struct of_device_id xway_gphy_match[] = {
+ { .compatible = "lantiq,xrx200-gphy-fw", .data = NULL },
+ { .compatible = "lantiq,xrx200a1x-gphy-fw", .data = &xrx200a1x_gphy_data },
+ { .compatible = "lantiq,xrx200a2x-gphy-fw", .data = &xrx200a2x_gphy_data },
+ { .compatible = "lantiq,xrx300-gphy-fw", .data = &xrx300_gphy_data },
+ { .compatible = "lantiq,xrx330-gphy-fw", .data = &xrx300_gphy_data },
+ {},
+};
+
+static int gswip_gphy_fw_load(struct gswip_priv *priv, struct gswip_gphy_fw *gphy_fw)
+{
+ struct device *dev = priv->dev;
+ const struct firmware *fw;
+ void *fw_addr;
+ dma_addr_t dma_addr;
+ dma_addr_t dev_addr;
+ size_t size;
+ int ret;
+
+ ret = clk_prepare_enable(gphy_fw->clk_gate);
+ if (ret)
+ return ret;
+
+ reset_control_assert(gphy_fw->reset);
+
+ ret = request_firmware(&fw, gphy_fw->fw_name, dev);
+ if (ret) {
+ dev_err(dev, "failed to load firmware: %s, error: %i\n",
+ gphy_fw->fw_name, ret);
+ return ret;
+ }
+
+ /* GPHY cores need the firmware code in a persistent and contiguous
+ * memory area with a 16 kB boundary aligned start address.
+ */
+ size = fw->size + XRX200_GPHY_FW_ALIGN;
+
+ fw_addr = dmam_alloc_coherent(dev, size, &dma_addr, GFP_KERNEL);
+ if (fw_addr) {
+ fw_addr = PTR_ALIGN(fw_addr, XRX200_GPHY_FW_ALIGN);
+ dev_addr = ALIGN(dma_addr, XRX200_GPHY_FW_ALIGN);
+ memcpy(fw_addr, fw->data, fw->size);
+ } else {
+ dev_err(dev, "failed to alloc firmware memory\n");
+ release_firmware(fw);
+ return -ENOMEM;
+ }
+
+ release_firmware(fw);
+
+ ret = regmap_write(priv->rcu_regmap, gphy_fw->fw_addr_offset, dev_addr);
+ if (ret)
+ return ret;
+
+ reset_control_deassert(gphy_fw->reset);
+
+ return ret;
+}
+
+static int gswip_gphy_fw_probe(struct gswip_priv *priv,
+ struct gswip_gphy_fw *gphy_fw,
+ struct device_node *gphy_fw_np, int i)
+{
+ struct device *dev = priv->dev;
+ u32 gphy_mode;
+ int ret;
+ char gphyname[10];
+
+ snprintf(gphyname, sizeof(gphyname), "gphy%d", i);
+
+ gphy_fw->clk_gate = devm_clk_get(dev, gphyname);
+ if (IS_ERR(gphy_fw->clk_gate)) {
+ dev_err(dev, "Failed to lookup gate clock\n");
+ return PTR_ERR(gphy_fw->clk_gate);
+ }
+
+ ret = of_property_read_u32(gphy_fw_np, "reg", &gphy_fw->fw_addr_offset);
+ if (ret)
+ return ret;
+
+ ret = of_property_read_u32(gphy_fw_np, "lantiq,gphy-mode", &gphy_mode);
+ /* Default to GE mode */
+ if (ret)
+ gphy_mode = GPHY_MODE_GE;
+
+ switch (gphy_mode) {
+ case GPHY_MODE_FE:
+ gphy_fw->fw_name = priv->gphy_fw_name_cfg->fe_firmware_name;
+ break;
+ case GPHY_MODE_GE:
+ gphy_fw->fw_name = priv->gphy_fw_name_cfg->ge_firmware_name;
+ break;
+ default:
+ dev_err(dev, "Unknown GPHY mode %d\n", gphy_mode);
+ return -EINVAL;
+ }
+
+ gphy_fw->reset = of_reset_control_array_get_exclusive(gphy_fw_np);
+ if (IS_ERR(gphy_fw->reset)) {
+ if (PTR_ERR(gphy_fw->reset) != -EPROBE_DEFER)
+ dev_err(dev, "Failed to lookup gphy reset\n");
+ return PTR_ERR(gphy_fw->reset);
+ }
+
+ return gswip_gphy_fw_load(priv, gphy_fw);
+}
+
+static void gswip_gphy_fw_remove(struct gswip_priv *priv,
+ struct gswip_gphy_fw *gphy_fw)
+{
+ int ret;
+
+ /* check if the device was fully probed */
+ if (!gphy_fw->fw_name)
+ return;
+
+ ret = regmap_write(priv->rcu_regmap, gphy_fw->fw_addr_offset, 0);
+ if (ret)
+ dev_err(priv->dev, "can not reset GPHY FW pointer");
+
+ clk_disable_unprepare(gphy_fw->clk_gate);
+
+ reset_control_put(gphy_fw->reset);
+}
+
+static int gswip_gphy_fw_list(struct gswip_priv *priv,
+ struct device_node *gphy_fw_list_np, u32 version)
+{
+ struct device *dev = priv->dev;
+ struct device_node *gphy_fw_np;
+ const struct of_device_id *match;
+ int err;
+ int i = 0;
+
+ /* The VRX200 rev 1.1 uses the GSWIP 2.0 and needs the older
+ * GPHY firmware. The VRX200 rev 1.2 uses the GSWIP 2.1 and also
+ * needs a different GPHY firmware.
+ */
+ if (of_device_is_compatible(gphy_fw_list_np, "lantiq,xrx200-gphy-fw")) {
+ switch (version) {
+ case GSWIP_VERSION_2_0:
+ priv->gphy_fw_name_cfg = &xrx200a1x_gphy_data;
+ break;
+ case GSWIP_VERSION_2_1:
+ priv->gphy_fw_name_cfg = &xrx200a2x_gphy_data;
+ break;
+ default:
+ dev_err(dev, "unknown GSWIP version: 0x%x", version);
+ return -ENOENT;
+ }
+ }
+
+ match = of_match_node(xway_gphy_match, gphy_fw_list_np);
+ if (match && match->data)
+ priv->gphy_fw_name_cfg = match->data;
+
+ if (!priv->gphy_fw_name_cfg) {
+ dev_err(dev, "GPHY compatible type not supported");
+ return -ENOENT;
+ }
+
+ priv->num_gphy_fw = of_get_available_child_count(gphy_fw_list_np);
+ if (!priv->num_gphy_fw)
+ return -ENOENT;
+
+ priv->rcu_regmap = syscon_regmap_lookup_by_phandle(gphy_fw_list_np,
+ "lantiq,rcu");
+ if (IS_ERR(priv->rcu_regmap))
+ return PTR_ERR(priv->rcu_regmap);
+
+ priv->gphy_fw = devm_kmalloc_array(dev, priv->num_gphy_fw,
+ sizeof(*priv->gphy_fw),
+ GFP_KERNEL | __GFP_ZERO);
+ if (!priv->gphy_fw)
+ return -ENOMEM;
+
+ for_each_available_child_of_node(gphy_fw_list_np, gphy_fw_np) {
+ err = gswip_gphy_fw_probe(priv, &priv->gphy_fw[i],
+ gphy_fw_np, i);
+ if (err)
+ goto remove_gphy;
+ i++;
+ }
+
+ return 0;
+
+remove_gphy:
+ for (i = 0; i < priv->num_gphy_fw; i++)
+ gswip_gphy_fw_remove(priv, &priv->gphy_fw[i]);
+ return err;
+}
+
+static int gswip_probe(struct platform_device *pdev)
+{
+ struct gswip_priv *priv;
+ struct resource *gswip_res, *mdio_res, *mii_res;
+ struct device_node *mdio_np, *gphy_fw_np;
+ struct device *dev = &pdev->dev;
+ int err;
+ int i;
+ u32 version;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ gswip_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->gswip = devm_ioremap_resource(dev, gswip_res);
+ if (IS_ERR(priv->gswip))
+ return PTR_ERR(priv->gswip);
+
+ mdio_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ priv->mdio = devm_ioremap_resource(dev, mdio_res);
+ if (IS_ERR(priv->mdio))
+ return PTR_ERR(priv->mdio);
+
+ mii_res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+ priv->mii = devm_ioremap_resource(dev, mii_res);
+ if (IS_ERR(priv->mii))
+ return PTR_ERR(priv->mii);
+
+ priv->hw_info = of_device_get_match_data(dev);
+ if (!priv->hw_info)
+ return -EINVAL;
+
+ priv->ds = dsa_switch_alloc(dev, priv->hw_info->max_ports);
+ if (!priv->ds)
+ return -ENOMEM;
+
+ priv->ds->priv = priv;
+ priv->ds->ops = &gswip_switch_ops;
+ priv->dev = dev;
+ version = gswip_switch_r(priv, GSWIP_VERSION);
+
+ /* bring up the mdio bus */
+ gphy_fw_np = of_find_compatible_node(pdev->dev.of_node, NULL,
+ "lantiq,gphy-fw");
+ if (gphy_fw_np) {
+ err = gswip_gphy_fw_list(priv, gphy_fw_np, version);
+ if (err) {
+ dev_err(dev, "gphy fw probe failed\n");
+ return err;
+ }
+ }
+
+ /* bring up the mdio bus */
+ mdio_np = of_find_compatible_node(pdev->dev.of_node, NULL,
+ "lantiq,xrx200-mdio");
+ if (mdio_np) {
+ err = gswip_mdio(priv, mdio_np);
+ if (err) {
+ dev_err(dev, "mdio probe failed\n");
+ goto gphy_fw;
+ }
+ }
+
+ err = dsa_register_switch(priv->ds);
+ if (err) {
+ dev_err(dev, "dsa switch register failed: %i\n", err);
+ goto mdio_bus;
+ }
+ if (!dsa_is_cpu_port(priv->ds, priv->hw_info->cpu_port)) {
+ dev_err(dev, "wrong CPU port defined, HW only supports port: %i",
+ priv->hw_info->cpu_port);
+ err = -EINVAL;
+ goto mdio_bus;
+ }
+
+ platform_set_drvdata(pdev, priv);
+
+ dev_info(dev, "probed GSWIP version %lx mod %lx\n",
+ (version & GSWIP_VERSION_REV_MASK) >> GSWIP_VERSION_REV_SHIFT,
+ (version & GSWIP_VERSION_MOD_MASK) >> GSWIP_VERSION_MOD_SHIFT);
+ return 0;
+
+mdio_bus:
+ if (mdio_np)
+ mdiobus_unregister(priv->ds->slave_mii_bus);
+gphy_fw:
+ for (i = 0; i < priv->num_gphy_fw; i++)
+ gswip_gphy_fw_remove(priv, &priv->gphy_fw[i]);
+ return err;
+}
+
+static int gswip_remove(struct platform_device *pdev)
+{
+ struct gswip_priv *priv = platform_get_drvdata(pdev);
+ int i;
+
+ if (!priv)
+ return 0;
+
+ /* disable the switch */
+ gswip_mdio_mask(priv, GSWIP_MDIO_GLOB_ENABLE, 0, GSWIP_MDIO_GLOB);
+
+ dsa_unregister_switch(priv->ds);
+
+ if (priv->ds->slave_mii_bus)
+ mdiobus_unregister(priv->ds->slave_mii_bus);
+
+ for (i = 0; i < priv->num_gphy_fw; i++)
+ gswip_gphy_fw_remove(priv, &priv->gphy_fw[i]);
+
+ return 0;
+}
+
+static const struct gswip_hw_info gswip_xrx200 = {
+ .max_ports = 7,
+ .cpu_port = 6,
+};
+
+static const struct of_device_id gswip_of_match[] = {
+ { .compatible = "lantiq,xrx200-gswip", .data = &gswip_xrx200 },
+ {},
+};
+MODULE_DEVICE_TABLE(of, gswip_of_match);
+
+static struct platform_driver gswip_driver = {
+ .probe = gswip_probe,
+ .remove = gswip_remove,
+ .driver = {
+ .name = "gswip",
+ .of_match_table = gswip_of_match,
+ },
+};
+
+module_platform_driver(gswip_driver);
+
+MODULE_AUTHOR("Hauke Mehrtens <hauke@hauke-m.de>");
+MODULE_DESCRIPTION("Lantiq / Intel GSWIP driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/dsa/lantiq_pce.h b/drivers/net/dsa/lantiq_pce.h
new file mode 100644
index 000000000000..180663138e75
--- /dev/null
+++ b/drivers/net/dsa/lantiq_pce.h
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCE microcode extracted from UGW 7.1.1 switch api
+ *
+ * Copyright (c) 2012, 2014, 2015 Lantiq Deutschland GmbH
+ * Copyright (C) 2012 John Crispin <john@phrozen.org>
+ * Copyright (C) 2017 - 2018 Hauke Mehrtens <hauke@hauke-m.de>
+ */
+
+enum {
+ OUT_MAC0 = 0,
+ OUT_MAC1,
+ OUT_MAC2,
+ OUT_MAC3,
+ OUT_MAC4,
+ OUT_MAC5,
+ OUT_ETHTYP,
+ OUT_VTAG0,
+ OUT_VTAG1,
+ OUT_ITAG0,
+ OUT_ITAG1, /*10 */
+ OUT_ITAG2,
+ OUT_ITAG3,
+ OUT_IP0,
+ OUT_IP1,
+ OUT_IP2,
+ OUT_IP3,
+ OUT_SIP0,
+ OUT_SIP1,
+ OUT_SIP2,
+ OUT_SIP3, /*20*/
+ OUT_SIP4,
+ OUT_SIP5,
+ OUT_SIP6,
+ OUT_SIP7,
+ OUT_DIP0,
+ OUT_DIP1,
+ OUT_DIP2,
+ OUT_DIP3,
+ OUT_DIP4,
+ OUT_DIP5, /*30*/
+ OUT_DIP6,
+ OUT_DIP7,
+ OUT_SESID,
+ OUT_PROT,
+ OUT_APP0,
+ OUT_APP1,
+ OUT_IGMP0,
+ OUT_IGMP1,
+ OUT_IPOFF, /*39*/
+ OUT_NONE = 63,
+};
+
+/* parser's microcode length type */
+#define INSTR 0
+#define IPV6 1
+#define LENACCU 2
+
+/* parser's microcode flag type */
+enum {
+ FLAG_ITAG = 0,
+ FLAG_VLAN,
+ FLAG_SNAP,
+ FLAG_PPPOE,
+ FLAG_IPV6,
+ FLAG_IPV6FL,
+ FLAG_IPV4,
+ FLAG_IGMP,
+ FLAG_TU,
+ FLAG_HOP,
+ FLAG_NN1, /*10 */
+ FLAG_NN2,
+ FLAG_END,
+ FLAG_NO, /*13*/
+};
+
+struct gswip_pce_microcode {
+ u16 val_3;
+ u16 val_2;
+ u16 val_1;
+ u16 val_0;
+};
+
+#define MC_ENTRY(val, msk, ns, out, len, type, flags, ipv4_len) \
+ { val, msk, ((ns) << 10 | (out) << 4 | (len) >> 1),\
+ ((len) & 1) << 15 | (type) << 13 | (flags) << 9 | (ipv4_len) << 8 }
+static const struct gswip_pce_microcode gswip_pce_microcode[] = {
+ /* value mask ns fields L type flags ipv4_len */
+ MC_ENTRY(0x88c3, 0xFFFF, 1, OUT_ITAG0, 4, INSTR, FLAG_ITAG, 0),
+ MC_ENTRY(0x8100, 0xFFFF, 2, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0),
+ MC_ENTRY(0x88A8, 0xFFFF, 1, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0),
+ MC_ENTRY(0x8100, 0xFFFF, 1, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0),
+ MC_ENTRY(0x8864, 0xFFFF, 17, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0800, 0xFFFF, 21, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x86DD, 0xFFFF, 22, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x8863, 0xFFFF, 16, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0xF800, 10, OUT_NONE, 0, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x0000, 40, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0600, 0x0600, 40, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x0000, 12, OUT_NONE, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0xAAAA, 0xFFFF, 14, OUT_NONE, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x0000, 41, OUT_NONE, 0, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0300, 0xFF00, 41, OUT_NONE, 0, INSTR, FLAG_SNAP, 0),
+ MC_ENTRY(0x0000, 0x0000, 41, OUT_NONE, 0, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x0000, 41, OUT_DIP7, 3, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x0000, 18, OUT_DIP7, 3, INSTR, FLAG_PPPOE, 0),
+ MC_ENTRY(0x0021, 0xFFFF, 21, OUT_NONE, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0057, 0xFFFF, 22, OUT_NONE, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x0000, 40, OUT_NONE, 0, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x4000, 0xF000, 24, OUT_IP0, 4, INSTR, FLAG_IPV4, 1),
+ MC_ENTRY(0x6000, 0xF000, 27, OUT_IP0, 3, INSTR, FLAG_IPV6, 0),
+ MC_ENTRY(0x0000, 0x0000, 41, OUT_NONE, 0, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x0000, 25, OUT_IP3, 2, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x0000, 26, OUT_SIP0, 4, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x0000, 40, OUT_NONE, 0, LENACCU, FLAG_NO, 0),
+ MC_ENTRY(0x1100, 0xFF00, 39, OUT_PROT, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0600, 0xFF00, 39, OUT_PROT, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_HOP, 0),
+ MC_ENTRY(0x2B00, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_NN1, 0),
+ MC_ENTRY(0x3C00, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_NN2, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_PROT, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x00E0, 35, OUT_NONE, 0, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x0000, 40, OUT_NONE, 0, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_HOP, 0),
+ MC_ENTRY(0x2B00, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_NN1, 0),
+ MC_ENTRY(0x3C00, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_NN2, 0),
+ MC_ENTRY(0x0000, 0x0000, 40, OUT_PROT, 1, IPV6, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x0000, 40, OUT_SIP0, 16, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x0000, 41, OUT_APP0, 4, INSTR, FLAG_IGMP, 0),
+ MC_ENTRY(0x0000, 0x0000, 41, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 41, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 41, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 41, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 41, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 41, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 41, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 41, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 41, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 41, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 41, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 41, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 41, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 41, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 41, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 41, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 41, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 41, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 41, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 41, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 41, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 41, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 41, OUT_NONE, 0, INSTR, FLAG_END, 0),
+};
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 62e486652e62..a5de9bffe5be 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -658,11 +658,7 @@ static void mt7530_adjust_link(struct dsa_switch *ds, int port,
if (phydev->asym_pause)
rmt_adv |= LPA_PAUSE_ASYM;
- if (phydev->advertising & ADVERTISED_Pause)
- lcl_adv |= ADVERTISE_PAUSE_CAP;
- if (phydev->advertising & ADVERTISED_Asym_Pause)
- lcl_adv |= ADVERTISE_PAUSE_ASYM;
-
+ lcl_adv = ethtool_adv_to_lcl_adv_t(phydev->advertising);
flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv);
if (flowctrl & FLOW_CTRL_TX)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 8da3d39e3218..78ce820b5257 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -434,7 +434,7 @@ static int mv88e6xxx_g1_irq_setup(struct mv88e6xxx_chip *chip)
err = request_threaded_irq(chip->irq, NULL,
mv88e6xxx_g1_irq_thread_fn,
- IRQF_ONESHOT,
+ IRQF_ONESHOT | IRQF_SHARED,
dev_name(chip->dev), chip);
if (err)
mv88e6xxx_g1_irq_free_common(chip);
@@ -575,6 +575,13 @@ restore_link:
return err;
}
+static int mv88e6xxx_phy_is_internal(struct dsa_switch *ds, int port)
+{
+ struct mv88e6xxx_chip *chip = ds->priv;
+
+ return port < chip->info->num_internal_phys;
+}
+
/* We expect the switch to perform auto negotiation if there is a real
* phy. However, in the case of a fixed link phy, we force the port
* settings from the fixed link settings.
@@ -585,7 +592,8 @@ static void mv88e6xxx_adjust_link(struct dsa_switch *ds, int port,
struct mv88e6xxx_chip *chip = ds->priv;
int err;
- if (!phy_is_pseudo_fixed_link(phydev))
+ if (!phy_is_pseudo_fixed_link(phydev) &&
+ mv88e6xxx_phy_is_internal(ds, port))
return;
mutex_lock(&chip->reg_lock);
@@ -709,13 +717,17 @@ static void mv88e6xxx_mac_config(struct dsa_switch *ds, int port,
struct mv88e6xxx_chip *chip = ds->priv;
int speed, duplex, link, pause, err;
- if (mode == MLO_AN_PHY)
+ if ((mode == MLO_AN_PHY) && mv88e6xxx_phy_is_internal(ds, port))
return;
if (mode == MLO_AN_FIXED) {
link = LINK_FORCED_UP;
speed = state->speed;
duplex = state->duplex;
+ } else if (!mv88e6xxx_phy_is_internal(ds, port)) {
+ link = state->link;
+ speed = state->speed;
+ duplex = state->duplex;
} else {
speed = SPEED_UNFORCED;
duplex = DUPLEX_UNFORCED;
@@ -3160,6 +3172,8 @@ static const struct mv88e6xxx_ops mv88e6176_ops = {
.vtu_getnext = mv88e6352_g1_vtu_getnext,
.vtu_loadpurge = mv88e6352_g1_vtu_loadpurge,
.serdes_power = mv88e6352_serdes_power,
+ .serdes_irq_setup = mv88e6352_serdes_irq_setup,
+ .serdes_irq_free = mv88e6352_serdes_irq_free,
.gpio_ops = &mv88e6352_gpio_ops,
.phylink_validate = mv88e6352_phylink_validate,
};
@@ -3366,6 +3380,8 @@ static const struct mv88e6xxx_ops mv88e6240_ops = {
.vtu_getnext = mv88e6352_g1_vtu_getnext,
.vtu_loadpurge = mv88e6352_g1_vtu_loadpurge,
.serdes_power = mv88e6352_serdes_power,
+ .serdes_irq_setup = mv88e6352_serdes_irq_setup,
+ .serdes_irq_free = mv88e6352_serdes_irq_free,
.gpio_ops = &mv88e6352_gpio_ops,
.avb_ops = &mv88e6352_avb_ops,
.ptp_ops = &mv88e6352_ptp_ops,
@@ -3664,6 +3680,8 @@ static const struct mv88e6xxx_ops mv88e6352_ops = {
.vtu_getnext = mv88e6352_g1_vtu_getnext,
.vtu_loadpurge = mv88e6352_g1_vtu_loadpurge,
.serdes_power = mv88e6352_serdes_power,
+ .serdes_irq_setup = mv88e6352_serdes_irq_setup,
+ .serdes_irq_free = mv88e6352_serdes_irq_free,
.gpio_ops = &mv88e6352_gpio_ops,
.avb_ops = &mv88e6352_avb_ops,
.ptp_ops = &mv88e6352_ptp_ops,
diff --git a/drivers/net/dsa/mv88e6xxx/phy.c b/drivers/net/dsa/mv88e6xxx/phy.c
index 46af8052e535..152a65d46e0b 100644
--- a/drivers/net/dsa/mv88e6xxx/phy.c
+++ b/drivers/net/dsa/mv88e6xxx/phy.c
@@ -110,6 +110,9 @@ int mv88e6xxx_phy_page_write(struct mv88e6xxx_chip *chip, int phy,
err = mv88e6xxx_phy_page_get(chip, phy, page);
if (!err) {
err = mv88e6xxx_phy_write(chip, phy, MV88E6XXX_PHY_PAGE, page);
+ if (!err)
+ err = mv88e6xxx_phy_write(chip, phy, reg, val);
+
mv88e6xxx_phy_page_put(chip, phy);
}
diff --git a/drivers/net/dsa/mv88e6xxx/serdes.c b/drivers/net/dsa/mv88e6xxx/serdes.c
index e82983975754..bb69650ff772 100644
--- a/drivers/net/dsa/mv88e6xxx/serdes.c
+++ b/drivers/net/dsa/mv88e6xxx/serdes.c
@@ -185,6 +185,111 @@ int mv88e6352_serdes_get_stats(struct mv88e6xxx_chip *chip, int port,
return ARRAY_SIZE(mv88e6352_serdes_hw_stats);
}
+static void mv88e6352_serdes_irq_link(struct mv88e6xxx_chip *chip, int port)
+{
+ struct dsa_switch *ds = chip->ds;
+ u16 status;
+ bool up;
+
+ mv88e6352_serdes_read(chip, MII_BMSR, &status);
+
+ /* Status must be read twice in order to give the current link
+ * status. Otherwise the change in link status since the last
+ * read of the register is returned.
+ */
+ mv88e6352_serdes_read(chip, MII_BMSR, &status);
+
+ up = status & BMSR_LSTATUS;
+
+ dsa_port_phylink_mac_change(ds, port, up);
+}
+
+static irqreturn_t mv88e6352_serdes_thread_fn(int irq, void *dev_id)
+{
+ struct mv88e6xxx_port *port = dev_id;
+ struct mv88e6xxx_chip *chip = port->chip;
+ irqreturn_t ret = IRQ_NONE;
+ u16 status;
+ int err;
+
+ mutex_lock(&chip->reg_lock);
+
+ err = mv88e6352_serdes_read(chip, MV88E6352_SERDES_INT_STATUS, &status);
+ if (err)
+ goto out;
+
+ if (status & MV88E6352_SERDES_INT_LINK_CHANGE) {
+ ret = IRQ_HANDLED;
+ mv88e6352_serdes_irq_link(chip, port->port);
+ }
+out:
+ mutex_unlock(&chip->reg_lock);
+
+ return ret;
+}
+
+static int mv88e6352_serdes_irq_enable(struct mv88e6xxx_chip *chip)
+{
+ return mv88e6352_serdes_write(chip, MV88E6352_SERDES_INT_ENABLE,
+ MV88E6352_SERDES_INT_LINK_CHANGE);
+}
+
+static int mv88e6352_serdes_irq_disable(struct mv88e6xxx_chip *chip)
+{
+ return mv88e6352_serdes_write(chip, MV88E6352_SERDES_INT_ENABLE, 0);
+}
+
+int mv88e6352_serdes_irq_setup(struct mv88e6xxx_chip *chip, int port)
+{
+ int err;
+
+ if (!mv88e6352_port_has_serdes(chip, port))
+ return 0;
+
+ chip->ports[port].serdes_irq = irq_find_mapping(chip->g2_irq.domain,
+ MV88E6352_SERDES_IRQ);
+ if (chip->ports[port].serdes_irq < 0) {
+ dev_err(chip->dev, "Unable to map SERDES irq: %d\n",
+ chip->ports[port].serdes_irq);
+ return chip->ports[port].serdes_irq;
+ }
+
+ /* Requesting the IRQ will trigger irq callbacks. So we cannot
+ * hold the reg_lock.
+ */
+ mutex_unlock(&chip->reg_lock);
+ err = request_threaded_irq(chip->ports[port].serdes_irq, NULL,
+ mv88e6352_serdes_thread_fn,
+ IRQF_ONESHOT, "mv88e6xxx-serdes",
+ &chip->ports[port]);
+ mutex_lock(&chip->reg_lock);
+
+ if (err) {
+ dev_err(chip->dev, "Unable to request SERDES interrupt: %d\n",
+ err);
+ return err;
+ }
+
+ return mv88e6352_serdes_irq_enable(chip);
+}
+
+void mv88e6352_serdes_irq_free(struct mv88e6xxx_chip *chip, int port)
+{
+ if (!mv88e6352_port_has_serdes(chip, port))
+ return;
+
+ mv88e6352_serdes_irq_disable(chip);
+
+ /* Freeing the IRQ will trigger irq callbacks. So we cannot
+ * hold the reg_lock.
+ */
+ mutex_unlock(&chip->reg_lock);
+ free_irq(chip->ports[port].serdes_irq, &chip->ports[port]);
+ mutex_lock(&chip->reg_lock);
+
+ chip->ports[port].serdes_irq = 0;
+}
+
/* Return the SERDES lane address a port is using. Only Ports 9 and 10
* have SERDES lanes. Returns -ENODEV if a port does not have a lane.
*/
diff --git a/drivers/net/dsa/mv88e6xxx/serdes.h b/drivers/net/dsa/mv88e6xxx/serdes.h
index b1496de9c6fe..7870c5a9ef12 100644
--- a/drivers/net/dsa/mv88e6xxx/serdes.h
+++ b/drivers/net/dsa/mv88e6xxx/serdes.h
@@ -18,6 +18,19 @@
#define MV88E6352_ADDR_SERDES 0x0f
#define MV88E6352_SERDES_PAGE_FIBER 0x01
+#define MV88E6352_SERDES_IRQ 0x0b
+#define MV88E6352_SERDES_INT_ENABLE 0x12
+#define MV88E6352_SERDES_INT_SPEED_CHANGE BIT(14)
+#define MV88E6352_SERDES_INT_DUPLEX_CHANGE BIT(13)
+#define MV88E6352_SERDES_INT_PAGE_RX BIT(12)
+#define MV88E6352_SERDES_INT_AN_COMPLETE BIT(11)
+#define MV88E6352_SERDES_INT_LINK_CHANGE BIT(10)
+#define MV88E6352_SERDES_INT_SYMBOL_ERROR BIT(9)
+#define MV88E6352_SERDES_INT_FALSE_CARRIER BIT(8)
+#define MV88E6352_SERDES_INT_FIFO_OVER_UNDER BIT(7)
+#define MV88E6352_SERDES_INT_FIBRE_ENERGY BIT(4)
+#define MV88E6352_SERDES_INT_STATUS 0x13
+
#define MV88E6341_ADDR_SERDES 0x15
@@ -73,5 +86,8 @@ int mv88e6390_serdes_irq_enable(struct mv88e6xxx_chip *chip, int port,
int lane);
int mv88e6390_serdes_irq_disable(struct mv88e6xxx_chip *chip, int port,
int lane);
+int mv88e6352_serdes_irq_setup(struct mv88e6xxx_chip *chip, int port);
+void mv88e6352_serdes_irq_free(struct mv88e6xxx_chip *chip, int port);
+
#endif
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.