diff options
Diffstat (limited to 'drivers/net/e1000/e1000_main.c')
| -rw-r--r-- | drivers/net/e1000/e1000_main.c | 385 |
1 files changed, 229 insertions, 156 deletions
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 97e71a4fe8eb..a373ccb308d8 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -1,7 +1,7 @@ /******************************************************************************* - Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free @@ -22,51 +22,13 @@ Contact Information: Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 *******************************************************************************/ #include "e1000.h" -/* Change Log - * 7.0.33 3-Feb-2006 - * o Added another fix for the pass false carrier bit - * 7.0.32 24-Jan-2006 - * o Need to rebuild with noew version number for the pass false carrier - * fix in e1000_hw.c - * 7.0.30 18-Jan-2006 - * o fixup for tso workaround to disable it for pci-x - * o fix mem leak on 82542 - * o fixes for 10 Mb/s connections and incorrect stats - * 7.0.28 01/06/2006 - * o hardware workaround to only set "speed mode" bit for 1G link. - * 7.0.26 12/23/2005 - * o wake on lan support modified for device ID 10B5 - * o fix dhcp + vlan issue not making it to the iAMT firmware - * 7.0.24 12/9/2005 - * o New hardware support for the Gigabit NIC embedded in the south bridge - * o Fixes to the recycling logic (skb->tail) from IBM LTC - * 6.3.9 12/16/2005 - * o incorporate fix for recycled skbs from IBM LTC - * 6.3.7 11/18/2005 - * o Honor eeprom setting for enabling/disabling Wake On Lan - * 6.3.5 11/17/2005 - * o Fix memory leak in rx ring handling for PCI Express adapters - * 6.3.4 11/8/05 - * o Patch from Jesper Juhl to remove redundant NULL checks for kfree - * 6.3.2 9/20/05 - * o Render logic that sets/resets DRV_LOAD as inline functions to - * avoid code replication. If f/w is AMT then set DRV_LOAD only when - * network interface is open. - * o Handle DRV_LOAD set/reset in cases where AMT uses VLANs. - * o Adjust PBA partioning for Jumbo frames using MTU size and not - * rx_buffer_len - * 6.3.1 9/19/05 - * o Use adapter->tx_timeout_factor in Tx Hung Detect logic - * (e1000_clean_tx_irq) - * o Support for 8086:10B5 device (Quad Port) - */ - char e1000_driver_name[] = "e1000"; static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver"; #ifndef CONFIG_E1000_NAPI @@ -74,9 +36,9 @@ static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver"; #else #define DRIVERNAPI "-NAPI" #endif -#define DRV_VERSION "7.0.33-k2"DRIVERNAPI +#define DRV_VERSION "7.0.38-k4"DRIVERNAPI char e1000_driver_version[] = DRV_VERSION; -static char e1000_copyright[] = "Copyright (c) 1999-2005 Intel Corporation."; +static char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation."; /* e1000_pci_tbl - PCI Device ID Table * @@ -208,8 +170,8 @@ static void e1000_leave_82542_rst(struct e1000_adapter *adapter); static void e1000_tx_timeout(struct net_device *dev); static void e1000_reset_task(struct net_device *dev); static void e1000_smartspeed(struct e1000_adapter *adapter); -static inline int e1000_82547_fifo_workaround(struct e1000_adapter *adapter, - struct sk_buff *skb); +static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter, + struct sk_buff *skb); static void e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp); static void e1000_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid); @@ -227,6 +189,16 @@ static void e1000_shutdown(struct pci_dev *pdev); static void e1000_netpoll (struct net_device *netdev); #endif +static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev, + pci_channel_state_t state); +static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev); +static void e1000_io_resume(struct pci_dev *pdev); + +static struct pci_error_handlers e1000_err_handler = { + .error_detected = e1000_io_error_detected, + .slot_reset = e1000_io_slot_reset, + .resume = e1000_io_resume, +}; static struct pci_driver e1000_driver = { .name = e1000_driver_name, @@ -238,7 +210,8 @@ static struct pci_driver e1000_driver = { .suspend = e1000_suspend, .resume = e1000_resume, #endif - .shutdown = e1000_shutdown + .shutdown = e1000_shutdown, + .err_handler = &e1000_err_handler }; MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>"); @@ -293,7 +266,7 @@ module_exit(e1000_exit_module); * @adapter: board private structure **/ -static inline void +static void e1000_irq_disable(struct e1000_adapter *adapter) { atomic_inc(&adapter->irq_sem); @@ -307,7 +280,7 @@ e1000_irq_disable(struct e1000_adapter *adapter) * @adapter: board private structure **/ -static inline void +static void e1000_irq_enable(struct e1000_adapter *adapter) { if (likely(atomic_dec_and_test(&adapter->irq_sem))) { @@ -348,10 +321,10 @@ e1000_update_mng_vlan(struct e1000_adapter *adapter) * For ASF and Pass Through versions of f/w this means that the * driver is no longer loaded. For AMT version (only with 82573) i * of the f/w this means that the netowrk i/f is closed. - * + * **/ -static inline void +static void e1000_release_hw_control(struct e1000_adapter *adapter) { uint32_t ctrl_ext; @@ -361,6 +334,7 @@ e1000_release_hw_control(struct e1000_adapter *adapter) switch (adapter->hw.mac_type) { case e1000_82571: case e1000_82572: + case e1000_80003es2lan: ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT); E1000_WRITE_REG(&adapter->hw, CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD); @@ -379,13 +353,13 @@ e1000_release_hw_control(struct e1000_adapter *adapter) * @adapter: address of board private structure * * e1000_get_hw_control sets {CTRL_EXT|FWSM}:DRV_LOAD bit. - * For ASF and Pass Through versions of f/w this means that - * the driver is loaded. For AMT version (only with 82573) + * For ASF and Pass Through versions of f/w this means that + * the driver is loaded. For AMT version (only with 82573) * of the f/w this means that the netowrk i/f is open. - * + * **/ -static inline void +static void e1000_get_hw_control(struct e1000_adapter *adapter) { uint32_t ctrl_ext; @@ -394,6 +368,7 @@ e1000_get_hw_control(struct e1000_adapter *adapter) switch (adapter->hw.mac_type) { case e1000_82571: case e1000_82572: + case e1000_80003es2lan: ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT); E1000_WRITE_REG(&adapter->hw, CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_DRV_LOAD); @@ -421,7 +396,7 @@ e1000_up(struct e1000_adapter *adapter) uint16_t mii_reg; e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg); if (mii_reg & MII_CR_POWER_DOWN) - e1000_phy_reset(&adapter->hw); + e1000_phy_hw_reset(&adapter->hw); } e1000_set_multi(netdev); @@ -711,8 +686,8 @@ e1000_probe(struct pci_dev *pdev, DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n"); /* if ksp3, indicate if it's port a being setup */ - if (pdev->device == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 && - e1000_ksp3_port_a == 0) + if (pdev->device == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 && + e1000_ksp3_port_a == 0) adapter->ksp3_port_a = 1; e1000_ksp3_port_a++; /* Reset for multiple KP3 adapters */ @@ -740,9 +715,9 @@ e1000_probe(struct pci_dev *pdev, if (pci_using_dac) netdev->features |= NETIF_F_HIGHDMA; - /* hard_start_xmit is safe against parallel locking */ - netdev->features |= NETIF_F_LLTX; - + /* hard_start_xmit is safe against parallel locking */ + netdev->features |= NETIF_F_LLTX; + adapter->en_mng_pt = e1000_enable_mng_pass_thru(&adapter->hw); /* before reading the EEPROM, reset the controller to @@ -972,8 +947,8 @@ e1000_sw_init(struct e1000_adapter *adapter) pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word); - adapter->rx_buffer_len = E1000_RXBUFFER_2048; - adapter->rx_ps_bsize0 = E1000_RXBUFFER_256; + adapter->rx_buffer_len = MAXIMUM_ETHERNET_FRAME_SIZE; + adapter->rx_ps_bsize0 = E1000_RXBUFFER_128; hw->max_frame_size = netdev->mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE; hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE; @@ -1181,7 +1156,7 @@ e1000_close(struct net_device *netdev) * @start: address of beginning of memory * @len: length of memory **/ -static inline boolean_t +static boolean_t e1000_check_64k_bound(struct e1000_adapter *adapter, void *start, unsigned long len) { @@ -1599,14 +1574,21 @@ e1000_setup_rctl(struct e1000_adapter *adapter) rctl |= E1000_RCTL_LPE; /* Setup buffer sizes */ - if (adapter->hw.mac_type >= e1000_82571) { - /* We can now specify buffers in 1K increments. - * BSIZE and BSEX are ignored in this case. */ - rctl |= adapter->rx_buffer_len << 0x11; - } else { - rctl &= ~E1000_RCTL_SZ_4096; - rctl |= E1000_RCTL_BSEX; - switch (adapter->rx_buffer_len) { + rctl &= ~E1000_RCTL_SZ_4096; + rctl |= E1000_RCTL_BSEX; + switch (adapter->rx_buffer_len) { + case E1000_RXBUFFER_256: + rctl |= E1000_RCTL_SZ_256; + rctl &= ~E1000_RCTL_BSEX; + break; + case E1000_RXBUFFER_512: + rctl |= E1000_RCTL_SZ_512; + rctl &= ~E1000_RCTL_BSEX; + break; + case E1000_RXBUFFER_1024: + rctl |= E1000_RCTL_SZ_1024; + rctl &= ~E1000_RCTL_BSEX; + break; case E1000_RXBUFFER_2048: default: rctl |= E1000_RCTL_SZ_2048; @@ -1621,7 +1603,6 @@ e1000_setup_rctl(struct e1000_adapter *adapter) case E1000_RXBUFFER_16384: rctl |= E1000_RCTL_SZ_16384; break; - } } #ifndef CONFIG_E1000_DISABLE_PACKET_SPLIT @@ -1715,7 +1696,7 @@ e1000_configure_rx(struct e1000_adapter *adapter) if (hw->mac_type >= e1000_82571) { ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); /* Reset delay timers after every interrupt */ - ctrl_ext |= E1000_CTRL_EXT_CANC; + ctrl_ext |= E1000_CTRL_EXT_INT_TIMER_CLR; #ifdef CONFIG_E1000_NAPI /* Auto-Mask interrupts upon ICR read. */ ctrl_ext |= E1000_CTRL_EXT_IAME; @@ -1807,7 +1788,7 @@ e1000_free_all_tx_resources(struct e1000_adapter *adapter) e1000_free_tx_resources(adapter, &adapter->tx_ring[i]); } -static inline void +static void e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter, struct e1000_buffer *buffer_info) { @@ -2247,6 +2228,7 @@ e1000_watchdog_task(struct e1000_adapter *adapter) if (link) { if (!netif_carrier_ok(netdev)) { + boolean_t txb2b = 1; e1000_get_speed_and_duplex(&adapter->hw, &adapter->link_speed, &adapter->link_duplex); @@ -2260,23 +2242,22 @@ e1000_watchdog_task(struct e1000_adapter *adapter) * and adjust the timeout factor */ netdev->tx_queue_len = adapter->tx_queue_len; adapter->tx_timeout_factor = 1; - adapter->txb2b = 1; switch (adapter->link_speed) { case SPEED_10: - adapter->txb2b = 0; + txb2b = 0; netdev->tx_queue_len = 10; adapter->tx_timeout_factor = 8; break; case SPEED_100: - adapter->txb2b = 0; + txb2b = 0; netdev->tx_queue_len = 100; /* maybe add some timeout factor ? */ break; } - if ((adapter->hw.mac_type == e1000_82571 || + if ((adapter->hw.mac_type == e1000_82571 || adapter->hw.mac_type == e1000_82572) && - adapter->txb2b == 0) { + txb2b == 0) { #define SPEED_MODE_BIT (1 << 21) uint32_t tarc0; tarc0 = E1000_READ_REG(&adapter->hw, TARC0); @@ -2400,7 +2381,7 @@ e1000_watchdog_task(struct e1000_adapter *adapter) #define E1000_TX_FLAGS_VLAN_MASK 0xffff0000 #define E1000_TX_FLAGS_VLAN_SHIFT 16 -static inline int +static int e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, struct sk_buff *skb) { @@ -2422,7 +2403,7 @@ e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, hdr_len = ((skb->h.raw - skb->data) + (skb->h.th->doff << 2)); mss = skb_shinfo(skb)->tso_size; - if (skb->protocol == ntohs(ETH_P_IP)) { + if (skb->protocol == htons(ETH_P_IP)) { skb->nh.iph->tot_len = 0; skb->nh.iph->check = 0; skb->h.th->check = @@ -2480,7 +2461,7 @@ e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, return FALSE; } -static inline boolean_t +static boolean_t e1000_tx_csum(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, struct sk_buff *skb) { @@ -2516,7 +2497,7 @@ e1000_tx_csum(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, #define E1000_MAX_TXD_PWR 12 #define E1000_MAX_DATA_PER_TXD (1<<E1000_MAX_TXD_PWR) -static inline int +static int e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, struct sk_buff *skb, unsigned int first, unsigned int max_per_txd, unsigned int nr_frags, unsigned int mss) @@ -2625,7 +2606,7 @@ e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, return count; } -static inline void +static void e1000_tx_queue(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, int tx_flags, int count) { @@ -2689,7 +2670,7 @@ e1000_tx_queue(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, #define E1000_FIFO_HDR 0x10 #define E1000_82547_PAD_LEN 0x3E0 -static inline int +static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter, struct sk_buff *skb) { uint32_t fifo_space = adapter->tx_fifo_size - adapter->tx_fifo_head; @@ -2716,7 +2697,7 @@ no_fifo_stall_required: } #define MINIMUM_DHCP_PACKET_SIZE 282 -static inline int +static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter, struct sk_buff *skb) { struct e1000_hw *hw = &adapter->hw; @@ -2764,7 +2745,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) unsigned int nr_frags = 0; unsigned int mss = 0; int count = 0; - int tso; + int tso; unsigned int f; len -= skb->data_len; @@ -2777,7 +2758,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) #ifdef NETIF_F_TSO mss = skb_shinfo(skb)->tso_size; - /* The controller does a simple calculation to + /* The controller does a simple calculation to * make sure there is enough room in the FIFO before * initiating the DMA for each buffer. The calc is: * 4 = ceil(buffer len/mss). To make sure we don't @@ -2800,7 +2781,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) case e1000_82573: pull_size = min((unsigned int)4, skb->data_len); if (!__pskb_pull_tail(skb, pull_size)) { - printk(KERN_ERR + printk(KERN_ERR "__pskb_pull_tail failed.\n"); dev_kfree_skb_any(skb); return NETDEV_TX_OK; @@ -2901,7 +2882,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) /* Old method was to assume IPv4 packet by default if TSO was enabled. * 82571 hardware supports TSO capabilities for IPv6 as well... * no longer assume, we must. */ - if (likely(skb->protocol == ntohs(ETH_P_IP))) + if (likely(skb->protocol == htons(ETH_P_IP))) tx_flags |= E1000_TX_FLAGS_IPV4; e1000_tx_queue(adapter, tx_ring, tx_flags, @@ -2982,8 +2963,7 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu) /* Adapter-specific max frame size limits. */ switch (adapter->hw.mac_type) { - case e1000_82542_rev2_0: - case e1000_82542_rev2_1: + case e1000_undefined ... e1000_82542_rev2_1: if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) { DPRINTK(PROBE, ERR, "Jumbo Frames not supported.\n"); return -EINVAL; @@ -3017,27 +2997,32 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu) break; } - - if (adapter->hw.mac_type > e1000_82547_rev_2) { - adapter->rx_buffer_len = max_frame; - E1000_ROUNDUP(adapter->rx_buffer_len, 1024); - } else { - if(unlikely((adapter->hw.mac_type < e1000_82543) && - (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE))) { - DPRINTK(PROBE, ERR, "Jumbo Frames not supported " - "on 82542\n"); - return -EINVAL; - } else { - if(max_frame <= E1000_RXBUFFER_2048) - adapter->rx_buffer_len = E1000_RXBUFFER_2048; - else if(max_frame <= E1000_RXBUFFER_4096) - adapter->rx_buffer_len = E1000_RXBUFFER_4096; - else if(max_frame <= E1000_RXBUFFER_8192) - adapter->rx_buffer_len = E1000_RXBUFFER_8192; - else if(max_frame <= E1000_RXBUFFER_16384) - adapter->rx_buffer_len = E1000_RXBUFFER_16384; - } - } + /* NOTE: dev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN + * means we reserve 2 more, this pushes us to allocate from the next + * larger slab size + * i.e. RXBUFFER_2048 --> size-4096 slab */ + + if (max_frame <= E1000_RXBUFFER_256) + adapter->rx_buffer_len = E1000_RXBUFFER_256; + else if (max_frame <= E1000_RXBUFFER_512) + adapter->rx_buffer_len = E1000_RXBUFFER_512; + else if (max_frame <= E1000_RXBUFFER_1024) + adapter->rx_buffer_len = E1000_RXBUFFER_1024; + else if (max_frame <= E1000_RXBUFFER_2048) + adapter->rx_buffer_len = E1000_RXBUFFER_2048; + else if (max_frame <= E1000_RXBUFFER_4096) + adapter->rx_buffer_len = E1000_RXBUFFER_4096; + else if (max_frame <= E1000_RXBUFFER_8192) + adapter->rx_buffer_len = E1000_RXBUFFER_8192; + else if (max_frame <= E1000_RXBUFFER_16384) + adapter->rx_buffer_len = E1000_RXBUFFER_16384; + + /* adjust allocation if LPE protects us, and we aren't using SBP */ +#define MAXIMUM_ETHERNET_VLAN_SIZE 1522 + if (!adapter->hw.tbi_compatibility_on && + ((max_frame == MAXIMUM_ETHERNET_FRAME_SIZE) || + (max_frame == MAXIMUM_ETHERNET_VLAN_SIZE))) + adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE; netdev->mtu = new_mtu; @@ -3060,11 +3045,21 @@ void e1000_update_stats(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; + struct pci_dev *pdev = adapter->pdev; unsigned long flags; uint16_t phy_tmp; #define PHY_IDLE_ERROR_COUNT_MASK 0x00FF + /* + * Prevent stats update while adapter is being reset, or if the pci + * connection is down. + */ + if (adapter->link_speed == 0) + return; + if (pdev->error_state && pdev->error_state != pci_channel_io_normal) + return; + spin_lock_irqsave(&adapter->stats_lock, flags); /* these counters are modified from e1000_adjust_tbi_stats, @@ -3165,7 +3160,6 @@ e1000_update_stats(struct e1000_adapter *adapter) adapter->stats.crcerrs + adapter->stats.algnerrc + adapter->stats.ruc + adapter->stats.roc + adapter->stats.cexterr; - adapter->net_stats.rx_dropped = 0; adapter->net_stats.rx_length_errors = adapter->stats.ruc + adapter->stats.roc; adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs; @@ -3391,13 +3385,15 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter, tx_ring->next_to_clean = i; - spin_lock(&tx_ring->tx_lock); - +#define TX_WAKE_THRESHOLD 32 if (unlikely(cleaned && netif_queue_stopped(netdev) && - netif_carrier_ok(netdev))) - netif_wake_queue(netdev); - - spin_unlock(&tx_ring->tx_lock); + netif_carrier_ok(netdev))) { + spin_lock(&tx_ring->tx_lock); + if (netif_queue_stopped(netdev) && + (E1000_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD)) + netif_wake_queue(netdev); + spin_unlock(&tx_ring->tx_lock); + } if (adapter->detect_tx_hung) { /* Detect a transmit hang in hardware, this serializes the @@ -3445,7 +3441,7 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter, * @sk_buff: socket buffer with received data **/ -static inline void +static void e1000_rx_checksum(struct e1000_adapter *adapter, uint32_t status_err, uint32_t csum, struct sk_buff *skb) @@ -3567,7 +3563,8 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter, flags); length--; } else { - dev_kfree_skb_irq(skb); + /* recycle */ + buffer_info->skb = skb; goto next_desc; } } @@ -3675,6 +3672,7 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, i = rx_ring->next_to_clean; rx_desc = E1000_RX_DESC_PS(*rx_ring, i); staterr = le32_to_cpu(rx_desc->wb.middle.status_error); + buffer_info = &rx_ring->buffer_info[i]; while (staterr & E1000_RXD_STAT_DD) { buffer_info = &rx_ring->buffer_info[i]; @@ -3733,9 +3731,9 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, /* page alloc/put takes too long and effects small packet * throughput, so unsplit small packets and save the alloc/put*/ - if (l1 && ((length + l1) < E1000_CB_LENGTH)) { + if (l1 && ((length + l1) <= adapter->rx_ps_bsize0)) { u8 *vaddr; - /* there is no documentation about how to call + /* there is no documentation about how to call * kmap_atomic, so we can't hold the mapping * very long */ pci_dma_sync_single_for_cpu(pdev, @@ -4155,7 +4153,7 @@ e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) spin_unlock_irqrestore(&adapter->stats_lock, flags); return -EIO; } - if (adapter->hw.phy_type == e1000_media_type_copper) { + if (adapter->hw.media_type == e1000_media_type_copper) { switch (data->reg_num) { case PHY_CTRL: if (mii_reg & MII_CR_POWER_DOWN) @@ -4514,21 +4512,13 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state) E1000_WRITE_REG(&adapter->hw, WUC, E1000_WUC_PME_EN); E1000_WRITE_REG(&adapter->hw, WUFC, wufc); - retval = pci_enable_wake(pdev, PCI_D3hot, 1); - if (retval) - DPRINTK(PROBE, ERR, "Error enabling D3 wake\n"); - retval = pci_enable_wake(pdev, PCI_D3cold, 1); - if (retval) - DPRINTK(PROBE, ERR, "Error enabling D3 cold wake\n"); + pci_enable_wake(pdev, PCI_D3hot, 1); + pci_enable_wake(pdev, PCI_D3cold, 1); } else { E1000_WRITE_REG(&adapter->hw, WUC, 0); E1000_WRITE_REG(&adapter->hw, WUFC, 0); - retval = pci_enable_wake(pdev, PCI_D3hot, 0); - if (retval) - DPRINTK(PROBE, ERR, "Error enabling D3 wake\n"); - retval = pci_enable_wake(pdev, PCI_D3cold, 0); - if (retval) - DPRINTK(PROBE, ERR, "Error enabling D3 cold wake\n"); + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); } if (adapter->hw.mac_type >= e1000_82540 && @@ -4537,13 +4527,8 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state) if (manc & E1000_MANC_SMBUS_EN) { manc |= E1000_MANC_ARP_EN; E1000_WRITE_REG(&adapter->hw, MANC, manc); - retval = pci_enable_wake(pdev, PCI_D3hot, 1); - if (retval) - DPRINTK(PROBE, ERR, "Error enabling D3 wake\n"); - retval = pci_enable_wake(pdev, PCI_D3cold, 1); - if (retval) - DPRINTK(PROBE, ERR, - "Error enabling D3 cold wake\n"); + pci_enable_wake(pdev, PCI_D3hot, 1); + pci_enable_wake(pdev, PCI_D3cold, 1); } } @@ -4553,9 +4538,7 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state) pci_disable_device(pdev); - retval = pci_set_power_state(pdev, pci_choose_state(pdev, state)); - if (retval) - DPRINTK(PROBE, ERR, "Error in setting power state\n"); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); return 0; } @@ -4566,22 +4549,15 @@ e1000_resume(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); - int retval; uint32_t manc, ret_val; - retval = pci_set_power_state(pdev, PCI_D0); - if (retval) - DPRINTK(PROBE, ERR, "Error in setting power state\n"); + pci_set_power_state(pdev, PCI_D0); e1000_pci_restore_state(adapter); ret_val = pci_enable_device(pdev); pci_set_master(pdev); - retval = pci_enable_wake(pdev, PCI_D3hot, 0); - if (retval) - DPRINTK(PROBE, ERR, "Error enabling D3 wake\n"); - retval = pci_enable_wake(pdev, PCI_D3cold, 0); - if (retval) - DPRINTK(PROBE, ERR, "Error enabling D3 cold wake\n"); + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); e1000_reset(adapter); E1000_WRITE_REG(&adapter->hw, WUS, ~0); @@ -4635,4 +4611,101 @@ e1000_netpoll(struct net_device *netdev) } #endif +/** + * e1000_io_error_detected - called when PCI error is detected + * @pdev: Pointer to PCI device + * @state: The current pci conneection state + * + * This function is called after a PCI bus error affecting + * this device has been detected. + */ +static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct e1000_adapter *adapter = netdev->priv; + + netif_device_detach(netdev); + + if (netif_running(netdev)) + e1000_down(adapter); + + /* Request a slot slot reset. */ + return PCI_ERS_RESULT_NEED_RESET; +} + +/** + * e1000_io_slot_reset - called after the pci bus has been reset. + * @pdev: Pointer to PCI device + * + * Restart the card from scratch, as if from a cold-boot. Implementation + * resembles the first-half of the e1000_resume routine. + */ +static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct e1000_adapter *adapter = netdev->priv; + + if (pci_enable_device(pdev)) { + printk(KERN_ERR "e1000: Cannot re-enable PCI device after reset.\n"); + return PCI_ERS_RESULT_DISCONNECT; + } + pci_set_master(pdev); + + pci_enable_wake(pdev, 3, 0); + pci_enable_wake(pdev, 4, 0); /* 4 == D3 cold */ + + /* Perform card reset only on one instance of the card */ + if (PCI_FUNC (pdev->devfn) != 0) + return PCI_ERS_RESULT_RECOVERED; + + e1000_reset(adapter); + E1000_WRITE_REG(&adapter->hw, WUS, ~0); + + return PCI_ERS_RESULT_RECOVERED; +} + +/** + * e1000_io_resume - called when traffic can start flowing again. + * @pdev: Pointer to PCI device + * + * This callback is called when the error recovery driver tells us that + * its OK to resume normal operation. Implementation resembles the + * second-half of the e1000_resume routine. + */ +static void e1000_io_resume(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct e1000_adapter *adapter = netdev->priv; + uint32_t manc, swsm; + + if (netif_running(netdev)) { + if (e1000_up(adapter)) { + printk("e1000: can't bring device back up after reset\n"); + return; + } + } + + netif_device_attach(netdev); + + if (adapter->hw.mac_type >= e1000_82540 && + adapter->hw.media_type == e1000_media_type_copper) { + manc = E1000_READ_REG(&adapter->hw, MANC); + manc &= ~(E1000_MANC_ARP_EN); + E1000_WRITE_REG(&adapter->hw, MANC, manc); + } + + switch (adapter->hw.mac_type) { + case e1000_82573: + swsm = E1000_READ_REG(&adapter->hw, SWSM); + E1000_WRITE_REG(&adapter->hw, SWSM, + swsm | E1000_SWSM_DRV_LOAD); + break; + default: + break; + } + + if (netif_running(netdev)) + mod_timer(&adapter->watchdog_timer, jiffies); +} + /* e1000_main.c */ |