diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/net/e1000e/lib.c | 23 |
1 files changed, 12 insertions, 11 deletions
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c index 7e55170a601e..68aa1749bf66 100644 --- a/drivers/net/e1000e/lib.c +++ b/drivers/net/e1000e/lib.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -533,7 +533,7 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw) mac->autoneg_failed = 1; return 0; } - e_dbg("NOT RXing /C/, disable AutoNeg and force link.\n"); + e_dbg("NOT Rx'ing /C/, disable AutoNeg and force link.\n"); /* Disable auto-negotiation in the TXCW register */ ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE)); @@ -556,7 +556,7 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw) * and disable forced link in the Device Control register * in an attempt to auto-negotiate with our link partner. */ - e_dbg("RXing /C/, enable AutoNeg and stop forcing link.\n"); + e_dbg("Rx'ing /C/, enable AutoNeg and stop forcing link.\n"); ew32(TXCW, mac->txcw); ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); @@ -598,7 +598,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) mac->autoneg_failed = 1; return 0; } - e_dbg("NOT RXing /C/, disable AutoNeg and force link.\n"); + e_dbg("NOT Rx'ing /C/, disable AutoNeg and force link.\n"); /* Disable auto-negotiation in the TXCW register */ ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE)); @@ -621,7 +621,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) * and disable forced link in the Device Control register * in an attempt to auto-negotiate with our link partner. */ - e_dbg("RXing /C/, enable AutoNeg and stop forcing link.\n"); + e_dbg("Rx'ing /C/, enable AutoNeg and stop forcing link.\n"); ew32(TXCW, mac->txcw); ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); @@ -800,9 +800,9 @@ static s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw) * The possible values of the "fc" parameter are: * 0: Flow control is completely disabled * 1: Rx flow control is enabled (we can receive pause frames, - * but not send pause frames). + * but not send pause frames). * 2: Tx flow control is enabled (we can send pause frames but we - * do not support receiving pause frames). + * do not support receiving pause frames). * 3: Both Rx and Tx flow control (symmetric) are enabled. */ switch (hw->fc.current_mode) { @@ -1031,9 +1031,9 @@ s32 e1000e_force_mac_fc(struct e1000_hw *hw) * The possible values of the "fc" parameter are: * 0: Flow control is completely disabled * 1: Rx flow control is enabled (we can receive pause - * frames but not send pause frames). + * frames but not send pause frames). * 2: Tx flow control is enabled (we can send pause frames - * frames but we do not receive pause frames). + * frames but we do not receive pause frames). * 3: Both Rx and Tx flow control (symmetric) is enabled. * other: No other values should be possible at this point. */ @@ -1135,7 +1135,8 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) ret_val = e1e_rphy(hw, PHY_AUTONEG_ADV, &mii_nway_adv_reg); if (ret_val) return ret_val; - ret_val = e1e_rphy(hw, PHY_LP_ABILITY, &mii_nway_lp_ability_reg); + ret_val = + e1e_rphy(hw, PHY_LP_ABILITY, &mii_nway_lp_ability_reg); if (ret_val) return ret_val; @@ -1188,7 +1189,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) } else { hw->fc.current_mode = e1000_fc_rx_pause; e_dbg("Flow Control = " - "RX PAUSE frames only.\r\n"); + "Rx PAUSE frames only.\r\n"); } } /* |