diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/net/ethernet/broadcom/bgmac.c | 114 |
1 files changed, 57 insertions, 57 deletions
diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c index 98ec1b8a7d8e..075f6e146b29 100644 --- a/drivers/net/ethernet/broadcom/bgmac.c +++ b/drivers/net/ethernet/broadcom/bgmac.c @@ -746,25 +746,25 @@ error: /* TODO: can we just drop @force? Can we don't reset MAC at all if there is * nothing to change? Try if after stabilizng driver. */ -static void bgmac_cmdcfg_maskset(struct bgmac *bgmac, u32 mask, u32 set, - bool force) +static void bgmac_umac_cmd_maskset(struct bgmac *bgmac, u32 mask, u32 set, + bool force) { - u32 cmdcfg = bgmac_read(bgmac, BGMAC_CMDCFG); + u32 cmdcfg = bgmac_umac_read(bgmac, UMAC_CMD); u32 new_val = (cmdcfg & mask) | set; u32 cmdcfg_sr; if (bgmac->feature_flags & BGMAC_FEAT_CMDCFG_SR_REV4) - cmdcfg_sr = BGMAC_CMDCFG_SR_REV4; + cmdcfg_sr = CMD_SW_RESET; else - cmdcfg_sr = BGMAC_CMDCFG_SR_REV0; + cmdcfg_sr = CMD_SW_RESET_OLD; - bgmac_set(bgmac, BGMAC_CMDCFG, cmdcfg_sr); + bgmac_umac_maskset(bgmac, UMAC_CMD, ~0, cmdcfg_sr); udelay(2); if (new_val != cmdcfg || force) - bgmac_write(bgmac, BGMAC_CMDCFG, new_val); + bgmac_umac_write(bgmac, UMAC_CMD, new_val); - bgmac_mask(bgmac, BGMAC_CMDCFG, ~cmdcfg_sr); + bgmac_umac_maskset(bgmac, UMAC_CMD, ~cmdcfg_sr, 0); udelay(2); } @@ -773,9 +773,9 @@ static void bgmac_write_mac_address(struct bgmac *bgmac, u8 *addr) u32 tmp; tmp = (addr[0] << 24) | (addr[1] << 16) | (addr[2] << 8) | addr[3]; - bgmac_write(bgmac, BGMAC_MACADDR_HIGH, tmp); + bgmac_umac_write(bgmac, UMAC_MAC0, tmp); tmp = (addr[4] << 8) | addr[5]; - bgmac_write(bgmac, BGMAC_MACADDR_LOW, tmp); + bgmac_umac_write(bgmac, UMAC_MAC1, tmp); } static void bgmac_set_rx_mode(struct net_device *net_dev) @@ -783,9 +783,9 @@ static void bgmac_set_rx_mode(struct net_device *net_dev) struct bgmac *bgmac = netdev_priv(net_dev); if (net_dev->flags & IFF_PROMISC) - bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_PROM, true); + bgmac_umac_cmd_maskset(bgmac, ~0, CMD_PROMISC, true); else - bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_PROM, 0, true); + bgmac_umac_cmd_maskset(bgmac, ~CMD_PROMISC, 0, true); } #if 0 /* We don't use that regs yet */ @@ -825,21 +825,21 @@ static void bgmac_clear_mib(struct bgmac *bgmac) /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_speed */ static void bgmac_mac_speed(struct bgmac *bgmac) { - u32 mask = ~(BGMAC_CMDCFG_ES_MASK | BGMAC_CMDCFG_HD); + u32 mask = ~(CMD_SPEED_MASK << CMD_SPEED_SHIFT | CMD_HD_EN); u32 set = 0; switch (bgmac->mac_speed) { case SPEED_10: - set |= BGMAC_CMDCFG_ES_10; + set |= CMD_SPEED_10 << CMD_SPEED_SHIFT; break; case SPEED_100: - set |= BGMAC_CMDCFG_ES_100; + set |= CMD_SPEED_100 << CMD_SPEED_SHIFT; break; case SPEED_1000: - set |= BGMAC_CMDCFG_ES_1000; + set |= CMD_SPEED_1000 << CMD_SPEED_SHIFT; break; case SPEED_2500: - set |= BGMAC_CMDCFG_ES_2500; + set |= CMD_SPEED_2500 << CMD_SPEED_SHIFT; break; default: dev_err(bgmac->dev, "Unsupported speed: %d\n", @@ -847,9 +847,9 @@ static void bgmac_mac_speed(struct bgmac *bgmac) } if (bgmac->mac_duplex == DUPLEX_HALF) - set |= BGMAC_CMDCFG_HD; + set |= CMD_HD_EN; - bgmac_cmdcfg_maskset(bgmac, mask, set, true); + bgmac_umac_cmd_maskset(bgmac, mask, set, true); } static void bgmac_miiconfig(struct bgmac *bgmac) @@ -917,7 +917,7 @@ static void bgmac_chip_reset(struct bgmac *bgmac) for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) bgmac_dma_tx_reset(bgmac, &bgmac->tx_ring[i]); - bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_ML, false); + bgmac_umac_cmd_maskset(bgmac, ~0, CMD_LCL_LOOP_EN, false); udelay(1); for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) @@ -986,34 +986,34 @@ static void bgmac_chip_reset(struct bgmac *bgmac) } /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_reset - * Specs don't say about using BGMAC_CMDCFG_SR, but in this routine - * BGMAC_CMDCFG is read _after_ putting chip in a reset. So it has to + * Specs don't say about using UMAC_CMD_SR, but in this routine + * UMAC_CMD is read _after_ putting chip in a reset. So it has to * be keps until taking MAC out of the reset. */ if (bgmac->feature_flags & BGMAC_FEAT_CMDCFG_SR_REV4) - cmdcfg_sr = BGMAC_CMDCFG_SR_REV4; + cmdcfg_sr = CMD_SW_RESET; else - cmdcfg_sr = BGMAC_CMDCFG_SR_REV0; - - bgmac_cmdcfg_maskset(bgmac, - ~(BGMAC_CMDCFG_TE | - BGMAC_CMDCFG_RE | - BGMAC_CMDCFG_RPI | - BGMAC_CMDCFG_TAI | - BGMAC_CMDCFG_HD | - BGMAC_CMDCFG_ML | - BGMAC_CMDCFG_CFE | - BGMAC_CMDCFG_RL | - BGMAC_CMDCFG_RED | - BGMAC_CMDCFG_PE | - BGMAC_CMDCFG_TPI | - BGMAC_CMDCFG_PAD_EN | - BGMAC_CMDCFG_PF), - BGMAC_CMDCFG_PROM | - BGMAC_CMDCFG_NLC | - BGMAC_CMDCFG_CFE | - cmdcfg_sr, - false); + cmdcfg_sr = CMD_SW_RESET_OLD; + + bgmac_umac_cmd_maskset(bgmac, + ~(CMD_TX_EN | + CMD_RX_EN | + CMD_RX_PAUSE_IGNORE | + CMD_TX_ADDR_INS | + CMD_HD_EN | + CMD_LCL_LOOP_EN | + CMD_CNTL_FRM_EN | + CMD_RMT_LOOP_EN | + CMD_RX_ERR_DISC | + CMD_PRBL_EN | + CMD_TX_PAUSE_IGNORE | + CMD_PAD_EN | + CMD_PAUSE_FWD), + CMD_PROMISC | + CMD_NO_LEN_CHK | + CMD_CNTL_FRM_EN | + cmdcfg_sr, + false); bgmac->mac_speed = SPEED_UNKNOWN; bgmac->mac_duplex = DUPLEX_UNKNOWN; @@ -1049,16 +1049,16 @@ static void bgmac_enable(struct bgmac *bgmac) u32 mode; if (bgmac->feature_flags & BGMAC_FEAT_CMDCFG_SR_REV4) - cmdcfg_sr = BGMAC_CMDCFG_SR_REV4; + cmdcfg_sr = CMD_SW_RESET; else - cmdcfg_sr = BGMAC_CMDCFG_SR_REV0; + cmdcfg_sr = CMD_SW_RESET_OLD; - cmdcfg = bgmac_read(bgmac, BGMAC_CMDCFG); - bgmac_cmdcfg_maskset(bgmac, ~(BGMAC_CMDCFG_TE | BGMAC_CMDCFG_RE), - cmdcfg_sr, true); + cmdcfg = bgmac_umac_read(bgmac, UMAC_CMD); + bgmac_umac_cmd_maskset(bgmac, ~(CMD_TX_EN | CMD_RX_EN), + cmdcfg_sr, true); udelay(2); - cmdcfg |= BGMAC_CMDCFG_TE | BGMAC_CMDCFG_RE; - bgmac_write(bgmac, BGMAC_CMDCFG, cmdcfg); + cmdcfg |= CMD_TX_EN | CMD_RX_EN; + bgmac_umac_write(bgmac, UMAC_CMD, cmdcfg); mode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & BGMAC_DS_MM_MASK) >> BGMAC_DS_MM_SHIFT; @@ -1078,7 +1078,7 @@ static void bgmac_enable(struct bgmac *bgmac) fl_ctl = 0x03cb04cb; bgmac_write(bgmac, BGMAC_FLOW_CTL_THRESH, fl_ctl); - bgmac_write(bgmac, BGMAC_PAUSE_CTL, 0x27fff); + bgmac_umac_write(bgmac, UMAC_PAUSE_CTRL, 0x27fff); } if (bgmac->feature_flags & BGMAC_FEAT_SET_RXQ_CLK) { @@ -1105,18 +1105,18 @@ static void bgmac_chip_init(struct bgmac *bgmac) bgmac_write(bgmac, BGMAC_INT_RECV_LAZY, 1 << BGMAC_IRL_FC_SHIFT); /* Enable 802.3x tx flow control (honor received PAUSE frames) */ - bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_RPI, 0, true); + bgmac_umac_cmd_maskset(bgmac, ~CMD_RX_PAUSE_IGNORE, 0, true); bgmac_set_rx_mode(bgmac->net_dev); bgmac_write_mac_address(bgmac, bgmac->net_dev->dev_addr); if (bgmac->loopback) - bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_ML, false); + bgmac_umac_cmd_maskset(bgmac, ~0, CMD_LCL_LOOP_EN, false); else - bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_ML, 0, false); + bgmac_umac_cmd_maskset(bgmac, ~CMD_LCL_LOOP_EN, 0, false); - bgmac_write(bgmac, BGMAC_RXMAX_LENGTH, 32 + ETHER_MAX_LEN); + bgmac_umac_write(bgmac, UMAC_MAX_FRAME_LEN, 32 + ETHER_MAX_LEN); bgmac_chip_intrs_on(bgmac); @@ -1252,7 +1252,7 @@ static int bgmac_change_mtu(struct net_device *net_dev, int mtu) { struct bgmac *bgmac = netdev_priv(net_dev); - bgmac_write(bgmac, BGMAC_RXMAX_LENGTH, 32 + mtu); + bgmac_umac_write(bgmac, UMAC_MAX_FRAME_LEN, 32 + mtu); return 0; } |