aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c')
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c153
1 files changed, 80 insertions, 73 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index d45b1555a602..e3de6fedf218 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -694,8 +694,8 @@ static int bnx2x_ets_e3b0_disabled(const struct link_params *params,
struct bnx2x *bp = params->bp;
if (!CHIP_IS_E3B0(bp)) {
- DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_disabled the chip isn't E3B0"
- "\n");
+ DP(NETIF_MSG_LINK,
+ "bnx2x_ets_e3b0_disabled the chip isn't E3B0\n");
return -EINVAL;
}
@@ -854,8 +854,8 @@ static int bnx2x_ets_e3b0_get_total_bw(
if (bnx2x_cos_state_bw == ets_params->cos[cos_idx].state) {
if (0 == ets_params->cos[cos_idx].params.bw_params.bw) {
- DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config BW"
- "was set to 0\n");
+ DP(NETIF_MSG_LINK,
+ "bnx2x_ets_E3B0_config BW was set to 0\n");
return -EINVAL;
}
*total_bw +=
@@ -866,12 +866,12 @@ static int bnx2x_ets_e3b0_get_total_bw(
/*Check taotl BW is valid */
if ((100 != *total_bw) || (0 == *total_bw)) {
if (0 == *total_bw) {
- DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config toatl BW"
- "shouldn't be 0\n");
+ DP(NETIF_MSG_LINK,
+ "bnx2x_ets_E3B0_config toatl BW shouldn't be 0\n");
return -EINVAL;
}
- DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config toatl BW should be"
- "100\n");
+ DP(NETIF_MSG_LINK,
+ "bnx2x_ets_E3B0_config toatl BW should be 100\n");
/**
* We can handle a case whre the BW isn't 100 this can happen
* if the TC are joined.
@@ -908,13 +908,13 @@ static int bnx2x_ets_e3b0_sp_pri_to_cos_set(const struct link_params *params,
if (DCBX_INVALID_COS != sp_pri_to_cos[pri]) {
DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_pri_to_cos_set invalid "
- "parameter There can't be two COS's with"
+ "parameter There can't be two COS's with "
"the same strict pri\n");
return -EINVAL;
}
if (pri > max_num_of_cos) {
- DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_pri_to_cos_set invalid"
+ DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_pri_to_cos_set invalid "
"parameter Illegal strict priority\n");
return -EINVAL;
}
@@ -1090,8 +1090,8 @@ int bnx2x_ets_e3b0_config(const struct link_params *params,
u8 cos_entry = 0;
if (!CHIP_IS_E3B0(bp)) {
- DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_disabled the chip isn't E3B0"
- "\n");
+ DP(NETIF_MSG_LINK,
+ "bnx2x_ets_e3b0_disabled the chip isn't E3B0\n");
return -EINVAL;
}
@@ -1108,8 +1108,8 @@ int bnx2x_ets_e3b0_config(const struct link_params *params,
bnx2x_status = bnx2x_ets_e3b0_get_total_bw(params, ets_params,
&total_bw);
if (0 != bnx2x_status) {
- DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config get_total_bw failed "
- "\n");
+ DP(NETIF_MSG_LINK,
+ "bnx2x_ets_E3B0_config get_total_bw failed\n");
return -EINVAL;
}
@@ -1144,13 +1144,13 @@ int bnx2x_ets_e3b0_config(const struct link_params *params,
cos_entry);
} else {
- DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_config cos state not"
- " valid\n");
+ DP(NETIF_MSG_LINK,
+ "bnx2x_ets_e3b0_config cos state not valid\n");
return -EINVAL;
}
if (0 != bnx2x_status) {
- DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_config set cos bw "
- "failed\n");
+ DP(NETIF_MSG_LINK,
+ "bnx2x_ets_e3b0_config set cos bw failed\n");
return bnx2x_status;
}
}
@@ -1160,8 +1160,8 @@ int bnx2x_ets_e3b0_config(const struct link_params *params,
sp_pri_to_cos);
if (0 != bnx2x_status) {
- DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config set_pri_cli_reg "
- "failed\n");
+ DP(NETIF_MSG_LINK,
+ "bnx2x_ets_E3B0_config set_pri_cli_reg failed\n");
return bnx2x_status;
}
@@ -1618,8 +1618,8 @@ static void bnx2x_xmac_init(struct bnx2x *bp, u32 max_speed)
if (is_port4mode && (REG_RD(bp, MISC_REG_RESET_REG_2) &
MISC_REGISTERS_RESET_REG_2_XMAC)) {
- DP(NETIF_MSG_LINK, "XMAC already out of reset"
- " in 4-port mode\n");
+ DP(NETIF_MSG_LINK,
+ "XMAC already out of reset in 4-port mode\n");
return;
}
@@ -1642,13 +1642,13 @@ static void bnx2x_xmac_init(struct bnx2x *bp, u32 max_speed)
/* Set the number of ports on the system side to 1 */
REG_WR(bp, MISC_REG_XMAC_CORE_PORT_MODE, 0);
if (max_speed == SPEED_10000) {
- DP(NETIF_MSG_LINK, "Init XMAC to 10G x 1"
- " port per path\n");
+ DP(NETIF_MSG_LINK,
+ "Init XMAC to 10G x 1 port per path\n");
/* Set the number of ports on the Warp Core to 10G */
REG_WR(bp, MISC_REG_XMAC_PHY_PORT_MODE, 3);
} else {
- DP(NETIF_MSG_LINK, "Init XMAC to 20G x 2 ports"
- " per path\n");
+ DP(NETIF_MSG_LINK,
+ "Init XMAC to 20G x 2 ports per path\n");
/* Set the number of ports on the Warp Core to 20G */
REG_WR(bp, MISC_REG_XMAC_PHY_PORT_MODE, 1);
}
@@ -3959,8 +3959,8 @@ static void bnx2x_warpcore_set_sgmii_speed(struct bnx2x_phy *phy,
val16 |= 0x0040;
break;
default:
- DP(NETIF_MSG_LINK, "Speed not supported: 0x%x"
- "\n", phy->req_line_speed);
+ DP(NETIF_MSG_LINK,
+ "Speed not supported: 0x%x\n", phy->req_line_speed);
return;
}
@@ -4092,9 +4092,9 @@ static int bnx2x_get_mod_abs_int_cfg(struct bnx2x *bp,
*/
if ((cfg_pin < PIN_CFG_GPIO0_P0) ||
(cfg_pin > PIN_CFG_GPIO3_P1)) {
- DP(NETIF_MSG_LINK, "ERROR: Invalid cfg pin %x for "
- "module detect indication\n",
- cfg_pin);
+ DP(NETIF_MSG_LINK,
+ "ERROR: Invalid cfg pin %x for module detect indication\n",
+ cfg_pin);
return -EINVAL;
}
@@ -4222,8 +4222,9 @@ static void bnx2x_warpcore_config_init(struct bnx2x_phy *phy,
break;
default:
- DP(NETIF_MSG_LINK, "Unsupported Serdes Net Interface "
- "0x%x\n", serdes_net_if);
+ DP(NETIF_MSG_LINK,
+ "Unsupported Serdes Net Interface 0x%x\n",
+ serdes_net_if);
return;
}
}
@@ -6127,8 +6128,8 @@ static int bnx2x_link_initialize(struct link_params *params,
if (phy_index == EXT_PHY2 &&
(bnx2x_phy_selection(params) ==
PORT_HW_CFG_PHY_SELECTION_FIRST_PHY)) {
- DP(NETIF_MSG_LINK, "Not initializing"
- " second phy\n");
+ DP(NETIF_MSG_LINK,
+ "Not initializing second phy\n");
continue;
}
params->phy[phy_index].config_init(
@@ -6447,8 +6448,8 @@ int bnx2x_link_update(struct link_params *params, struct link_vars *vars)
*/
if (active_external_phy == EXT_PHY1) {
if (params->phy[EXT_PHY2].phy_specific_func) {
- DP(NETIF_MSG_LINK, "Disabling TX on"
- " EXT_PHY2\n");
+ DP(NETIF_MSG_LINK,
+ "Disabling TX on EXT_PHY2\n");
params->phy[EXT_PHY2].phy_specific_func(
&params->phy[EXT_PHY2],
params, DISABLE_TX);
@@ -7341,8 +7342,8 @@ static int bnx2x_8726_read_sfp_module_eeprom(struct bnx2x_phy *phy,
u16 val = 0;
u16 i;
if (byte_cnt > 16) {
- DP(NETIF_MSG_LINK, "Reading from eeprom is"
- " is limited to 0xf\n");
+ DP(NETIF_MSG_LINK,
+ "Reading from eeprom is limited to 0xf\n");
return -EINVAL;
}
/* Set the read command byte count */
@@ -7413,8 +7414,8 @@ static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy,
" addr %d, cnt %d\n",
addr, byte_cnt);*/
if (byte_cnt > 16) {
- DP(NETIF_MSG_LINK, "Reading from eeprom is"
- " is limited to 16 bytes\n");
+ DP(NETIF_MSG_LINK,
+ "Reading from eeprom is limited to 16 bytes\n");
return -EINVAL;
}
@@ -7443,8 +7444,8 @@ static int bnx2x_8727_read_sfp_module_eeprom(struct bnx2x_phy *phy,
u16 val, i;
if (byte_cnt > 16) {
- DP(NETIF_MSG_LINK, "Reading from eeprom is"
- " is limited to 0xf\n");
+ DP(NETIF_MSG_LINK,
+ "Reading from eeprom is limited to 0xf\n");
return -EINVAL;
}
@@ -7591,13 +7592,14 @@ static int bnx2x_get_edc_mode(struct bnx2x_phy *phy,
check_limiting_mode = 1;
} else if (copper_module_type &
SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE) {
- DP(NETIF_MSG_LINK, "Passive Copper"
- " cable detected\n");
+ DP(NETIF_MSG_LINK,
+ "Passive Copper cable detected\n");
*edc_mode =
EDC_MODE_PASSIVE_DAC;
} else {
- DP(NETIF_MSG_LINK, "Unknown copper-cable-"
- "type 0x%x !!!\n", copper_module_type);
+ DP(NETIF_MSG_LINK,
+ "Unknown copper-cable-type 0x%x !!!\n",
+ copper_module_type);
return -EINVAL;
}
break;
@@ -7635,8 +7637,8 @@ static int bnx2x_get_edc_mode(struct bnx2x_phy *phy,
SFP_EEPROM_OPTIONS_ADDR,
SFP_EEPROM_OPTIONS_SIZE,
options) != 0) {
- DP(NETIF_MSG_LINK, "Failed to read Option"
- " field from module EEPROM\n");
+ DP(NETIF_MSG_LINK,
+ "Failed to read Option field from module EEPROM\n");
return -EINVAL;
}
if ((options[0] & SFP_EEPROM_OPTIONS_LINEAR_RX_OUT_MASK))
@@ -7677,15 +7679,15 @@ static int bnx2x_verify_sfp_module(struct bnx2x_phy *phy,
FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY) {
/* Use first phy request only in case of non-dual media*/
if (DUAL_MEDIA(params)) {
- DP(NETIF_MSG_LINK, "FW does not support OPT MDL "
- "verification\n");
+ DP(NETIF_MSG_LINK,
+ "FW does not support OPT MDL verification\n");
return -EINVAL;
}
cmd = DRV_MSG_CODE_VRFY_FIRST_PHY_OPT_MDL;
} else {
/* No support in OPT MDL detection */
- DP(NETIF_MSG_LINK, "FW does not support OPT MDL "
- "verification\n");
+ DP(NETIF_MSG_LINK,
+ "FW does not support OPT MDL verification\n");
return -EINVAL;
}
@@ -7736,8 +7738,9 @@ static int bnx2x_wait_for_sfp_module_initialized(struct bnx2x_phy *phy,
for (timeout = 0; timeout < 60; timeout++) {
if (bnx2x_read_sfp_module_eeprom(phy, params, 1, 1, &val)
== 0) {
- DP(NETIF_MSG_LINK, "SFP+ module initialization "
- "took %d ms\n", timeout * 5);
+ DP(NETIF_MSG_LINK,
+ "SFP+ module initialization took %d ms\n",
+ timeout * 5);
return 0;
}
msleep(5);
@@ -8506,8 +8509,8 @@ static int bnx2x_8726_config_init(struct bnx2x_phy *phy,
/* Set TX PreEmphasis if needed */
if ((params->feature_config_flags &
FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) {
- DP(NETIF_MSG_LINK, "Setting TX_CTRL1 0x%x,"
- "TX_CTRL2 0x%x\n",
+ DP(NETIF_MSG_LINK,
+ "Setting TX_CTRL1 0x%x, TX_CTRL2 0x%x\n",
phy->tx_preemphasis[0],
phy->tx_preemphasis[1]);
bnx2x_cl45_write(bp, phy,
@@ -8788,8 +8791,8 @@ static void bnx2x_8727_handle_mod_abs(struct bnx2x_phy *phy,
if (mod_abs & (1<<8)) {
/* Module is absent */
- DP(NETIF_MSG_LINK, "MOD_ABS indication "
- "show module is absent\n");
+ DP(NETIF_MSG_LINK,
+ "MOD_ABS indication show module is absent\n");
phy->media_type = ETH_PHY_NOT_PRESENT;
/*
* 1. Set mod_abs to detect next module
@@ -8816,8 +8819,8 @@ static void bnx2x_8727_handle_mod_abs(struct bnx2x_phy *phy,
} else {
/* Module is present */
- DP(NETIF_MSG_LINK, "MOD_ABS indication "
- "show module is present\n");
+ DP(NETIF_MSG_LINK,
+ "MOD_ABS indication show module is present\n");
/*
* First disable transmitter, and if the module is ok, the
* module_detection will enable it
@@ -8908,8 +8911,9 @@ static u8 bnx2x_8727_read_status(struct bnx2x_phy *phy,
if ((val1 & (1<<8)) == 0) {
if (!CHIP_IS_E1x(bp))
oc_port = BP_PATH(bp) + (params->port << 1);
- DP(NETIF_MSG_LINK, "8727 Power fault has been detected"
- " on port %d\n", oc_port);
+ DP(NETIF_MSG_LINK,
+ "8727 Power fault has been detected on port %d\n",
+ oc_port);
netdev_err(bp->dev, "Error: Power fault on Port %d has"
" been detected and the power to "
"that SFP+ module has been removed"
@@ -9690,8 +9694,8 @@ static u8 bnx2x_848xx_read_status(struct bnx2x_phy *phy,
MDIO_AN_REG_8481_EXPANSION_REG_RD_RW,
&legacy_status);
- DP(NETIF_MSG_LINK, "Legacy speed status"
- " = 0x%x\n", legacy_status);
+ DP(NETIF_MSG_LINK, "Legacy speed status = 0x%x\n",
+ legacy_status);
link_up = ((legacy_status & (1<<11)) == (1<<11));
if (link_up) {
legacy_speed = (legacy_status & (3<<9));
@@ -9709,9 +9713,10 @@ static u8 bnx2x_848xx_read_status(struct bnx2x_phy *phy,
else
vars->duplex = DUPLEX_HALF;
- DP(NETIF_MSG_LINK, "Link is up in %dMbps,"
- " is_duplex_full= %d\n", vars->line_speed,
- (vars->duplex == DUPLEX_FULL));
+ DP(NETIF_MSG_LINK,
+ "Link is up in %dMbps, is_duplex_full= %d\n",
+ vars->line_speed,
+ (vars->duplex == DUPLEX_FULL));
/* Check legacy speed AN resolution */
bnx2x_cl45_read(bp, phy,
MDIO_AN_DEVAD,
@@ -10286,9 +10291,10 @@ static u8 bnx2x_54618se_read_status(struct bnx2x_phy *phy,
} else /* Should not happen */
vars->line_speed = 0;
- DP(NETIF_MSG_LINK, "Link is up in %dMbps,"
- " is_duplex_full= %d\n", vars->line_speed,
- (vars->duplex == DUPLEX_FULL));
+ DP(NETIF_MSG_LINK,
+ "Link is up in %dMbps, is_duplex_full= %d\n",
+ vars->line_speed,
+ (vars->duplex == DUPLEX_FULL));
/* Check legacy speed AN resolution */
bnx2x_cl22_read(bp, phy,
@@ -11336,8 +11342,9 @@ static void bnx2x_phy_def_cfg(struct link_params *params,
dev_info.
port_hw_config[params->port].speed_capability_mask));
}
- DP(NETIF_MSG_LINK, "Default config phy idx %x cfg 0x%x speed_cap_mask"
- " 0x%x\n", phy_index, link_config, phy->speed_cap_mask);
+ DP(NETIF_MSG_LINK,
+ "Default config phy idx %x cfg 0x%x speed_cap_mask 0x%x\n",
+ phy_index, link_config, phy->speed_cap_mask);
phy->req_duplex = DUPLEX_FULL;
switch (link_config & PORT_FEATURE_LINK_SPEED_MASK) {
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.