diff options
Diffstat (limited to 'drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h')
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h | 58 |
1 files changed, 57 insertions, 1 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index bc2f65b32649..791eb2d53011 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -1,6 +1,6 @@ /* bnx2x_reg.h: Broadcom Everest network driver. * - * Copyright (c) 2007-2012 Broadcom Corporation + * Copyright (c) 2007-2013 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -825,6 +825,7 @@ /* [RW 28] The value sent to CM header in the case of CFC load error. */ #define DORQ_REG_ERR_CMHEAD 0x170058 #define DORQ_REG_IF_EN 0x170004 +#define DORQ_REG_MAX_RVFID_SIZE 0x1701ec #define DORQ_REG_MODE_ACT 0x170008 /* [RW 5] The normal mode CID extraction offset. */ #define DORQ_REG_NORM_CID_OFST 0x17002c @@ -847,6 +848,22 @@ writes the same initial credit to the rspa_crd_cnt and rspb_crd_cnt. The read reads this written value. */ #define DORQ_REG_RSP_INIT_CRD 0x170048 +#define DORQ_REG_RSPB_CRD_CNT 0x1700b0 +#define DORQ_REG_VF_NORM_CID_BASE 0x1701a0 +#define DORQ_REG_VF_NORM_CID_OFST 0x1701f4 +#define DORQ_REG_VF_NORM_CID_WND_SIZE 0x1701a4 +#define DORQ_REG_VF_NORM_MAX_CID_COUNT 0x1701e4 +#define DORQ_REG_VF_NORM_VF_BASE 0x1701a8 +/* [RW 10] VF type validation mask value */ +#define DORQ_REG_VF_TYPE_MASK_0 0x170218 +/* [RW 17] VF type validation Min MCID value */ +#define DORQ_REG_VF_TYPE_MAX_MCID_0 0x1702d8 +/* [RW 17] VF type validation Max MCID value */ +#define DORQ_REG_VF_TYPE_MIN_MCID_0 0x170298 +/* [RW 10] VF type validation comp value */ +#define DORQ_REG_VF_TYPE_VALUE_0 0x170258 +#define DORQ_REG_VF_USAGE_CT_LIMIT 0x170340 + /* [RW 4] Initial activity counter value on the load request; when the shortcut is done. */ #define DORQ_REG_SHRT_ACT_CNT 0x170070 @@ -859,6 +876,7 @@ #define HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 (0x1<<2) #define HC_CONFIG_0_REG_SINGLE_ISR_EN_0 (0x1<<1) #define HC_CONFIG_1_REG_BLOCK_DISABLE_1 (0x1<<0) +#define DORQ_REG_VF_USAGE_CNT 0x170320 #define HC_REG_AGG_INT_0 0x108050 #define HC_REG_AGG_INT_1 0x108054 #define HC_REG_ATTN_BIT 0x108120 @@ -2136,6 +2154,8 @@ /* [R 32] Interrupt register #0 read */ #define NIG_REG_NIG_INT_STS_0 0x103b0 #define NIG_REG_NIG_INT_STS_1 0x103c0 +/* [RC 32] Interrupt register #0 read clear */ +#define NIG_REG_NIG_INT_STS_CLR_0 0x103b4 /* [R 32] Legacy E1 and E1H location for parity error mask register. */ #define NIG_REG_NIG_PRTY_MASK 0x103dc /* [RW 32] Parity mask register #0 read/write */ @@ -2571,6 +2591,7 @@ current task in process). */ #define PBF_REG_DISABLE_NEW_TASK_PROC_P4 0x14006c #define PBF_REG_DISABLE_PF 0x1402e8 +#define PBF_REG_DISABLE_VF 0x1402ec /* [RW 18] For port 0: For each client that is subject to WFQ (the * corresponding bit is 1); indicates to which of the credit registers this * client is mapped. For clients which are not credit blocked; their mapping @@ -3708,6 +3729,10 @@ #define PXP_REG_HST_DISCARD_INTERNAL_WRITES_STATUS 0x10309c /* [WB 160] Used for initialization of the inbound interrupts memory */ #define PXP_REG_HST_INBOUND_INT 0x103800 +/* [RW 7] Indirect access to the permission table. The fields are : {Valid; + * VFID[5:0]} + */ +#define PXP_REG_HST_ZONE_PERMISSION_TABLE 0x103400 /* [RW 32] Interrupt mask register #0 read/write */ #define PXP_REG_PXP_INT_MASK_0 0x103074 #define PXP_REG_PXP_INT_MASK_1 0x103084 @@ -5966,6 +5991,7 @@ #define HW_LOCK_RESOURCE_SPIO 2 #define AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT (0x1<<4) #define AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR (0x1<<5) +#define AEU_INPUTS_ATTN_BITS_BRB_HW_INTERRUPT (0x1<<19) #define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR (0x1<<18) #define AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT (0x1<<31) #define AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR (0x1<<30) @@ -6305,6 +6331,15 @@ #define PCI_PM_DATA_B 0x414 #define PCI_ID_VAL1 0x434 #define PCI_ID_VAL2 0x438 +#define GRC_CONFIG_REG_PF_INIT_VF 0x624 +#define GRC_CR_PF_INIT_VF_PF_FIRST_VF_NUM_MASK 0xf +/* First VF_NUM for PF is encoded in this register. + * The number of VFs assigned to a PF is assumed to be a multiple of 8. + * Software should program these bits based on Total Number of VFs \ + * programmed for each PF. + * Since registers from 0x000-0x7ff are split across functions, each PF will + * have the same location for the same 4 bits + */ #define PXPCS_TL_CONTROL_5 0x814 #define PXPCS_TL_CONTROL_5_UNKNOWNTYPE_ERR_ATTN (1 << 29) /*WC*/ @@ -6554,6 +6589,27 @@ (7L<<ME_REG_ABS_PF_NUM_SHIFT) /* Absolute PF Num */ +#define PXP_VF_ADDR_IGU_START 0 +#define PXP_VF_ADDR_IGU_SIZE 0x3000 +#define PXP_VF_ADDR_IGU_END\ + ((PXP_VF_ADDR_IGU_START) + (PXP_VF_ADDR_IGU_SIZE) - 1) + +#define PXP_VF_ADDR_USDM_QUEUES_START 0x3000 +#define PXP_VF_ADDR_USDM_QUEUES_SIZE\ + (PXP_VF_ADRR_NUM_QUEUES * PXP_ADDR_QUEUE_SIZE) +#define PXP_VF_ADDR_USDM_QUEUES_END\ + ((PXP_VF_ADDR_USDM_QUEUES_START) + (PXP_VF_ADDR_USDM_QUEUES_SIZE) - 1) + +#define PXP_VF_ADDR_CSDM_GLOBAL_START 0x7600 +#define PXP_VF_ADDR_CSDM_GLOBAL_SIZE (PXP_ADDR_REG_SIZE) +#define PXP_VF_ADDR_CSDM_GLOBAL_END\ + ((PXP_VF_ADDR_CSDM_GLOBAL_START) + (PXP_VF_ADDR_CSDM_GLOBAL_SIZE) - 1) + +#define PXP_VF_ADDR_DB_START 0x7c00 +#define PXP_VF_ADDR_DB_SIZE 0x200 +#define PXP_VF_ADDR_DB_END\ + ((PXP_VF_ADDR_DB_START) + (PXP_VF_ADDR_DB_SIZE) - 1) + #define MDIO_REG_BANK_CL73_IEEEB0 0x0 #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL 0x0 #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN 0x0200 |