diff options
Diffstat (limited to 'drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h')
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h | 69 |
1 files changed, 46 insertions, 23 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index e58073ef33b4..44609de4e5dc 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -160,8 +160,11 @@ #define BRB1_REG_PAUSE_HIGH_THRESHOLD_1 0x6007c /* [RW 10] Write client 0: Assert pause threshold. */ #define BRB1_REG_PAUSE_LOW_THRESHOLD_0 0x60068 -#define BRB1_REG_PAUSE_LOW_THRESHOLD_1 0x6006c -/* [R 24] The number of full blocks occupied by port. */ +/* [RW 1] Indicates if to use per-class guaranty mode (new mode) or per-MAC + * guaranty mode (backwards-compatible mode). 0=per-MAC guaranty mode (BC + * mode). 1=per-class guaranty mode (new mode). */ +#define BRB1_REG_PER_CLASS_GUARANTY_MODE 0x60268 +/* [R 24] The number of full blocks occpied by port. */ #define BRB1_REG_PORT_NUM_OCC_BLOCKS_0 0x60094 /* [RW 1] Reset the design by software. */ #define BRB1_REG_SOFT_RESET 0x600dc @@ -1619,6 +1622,14 @@ register bits. */ #define MISC_REG_LCPLL_CTRL_1 0xa2a4 #define MISC_REG_LCPLL_CTRL_REG_2 0xa2a8 +/* [RW 1] LCPLL power down. Global register. Active High. Reset on POR + * reset. */ +#define MISC_REG_LCPLL_E40_PWRDWN 0xaa74 +/* [RW 1] LCPLL VCO reset. Global register. Active Low Reset on POR reset. */ +#define MISC_REG_LCPLL_E40_RESETB_ANA 0xaa78 +/* [RW 1] LCPLL post-divider reset. Global register. Active Low Reset on POR + * reset. */ +#define MISC_REG_LCPLL_E40_RESETB_DIG 0xaa7c /* [RW 4] Interrupt mask register #0 read/write */ #define MISC_REG_MISC_INT_MASK 0xa388 /* [RW 1] Parity mask register #0 read/write */ @@ -1754,6 +1765,7 @@ * is compared to the value on ctrl_md_devad. Drives output * misc_xgxs0_phy_addr. Global register. */ #define MISC_REG_WC0_CTRL_PHY_ADDR 0xa9cc +#define MISC_REG_WC0_RESET 0xac30 /* [RW 2] XMAC Core port mode. Indicates the number of ports on the system side. This should be less than or equal to phy_port_mode; if some of the ports are not used. This enables reduction of frequency on the core side. @@ -6823,11 +6835,13 @@ Theotherbitsarereservedandshouldbezero*/ #define MDIO_CTL_REG_84823_MEDIA_PRIORITY_COPPER 0x0000 #define MDIO_CTL_REG_84823_MEDIA_PRIORITY_FIBER 0x0100 #define MDIO_CTL_REG_84823_MEDIA_FIBER_1G 0x1000 -#define MDIO_CTL_REG_84823_USER_CTRL_REG 0x4005 -#define MDIO_CTL_REG_84823_USER_CTRL_CMS 0x0080 - -#define MDIO_PMA_REG_84823_CTL_LED_CTL_1 0xa8e3 -#define MDIO_PMA_REG_84823_LED3_STRETCH_EN 0x0080 +#define MDIO_CTL_REG_84823_USER_CTRL_REG 0x4005 +#define MDIO_CTL_REG_84823_USER_CTRL_CMS 0x0080 +#define MDIO_PMA_REG_84823_CTL_SLOW_CLK_CNT_HIGH 0xa82b +#define MDIO_PMA_REG_84823_BLINK_RATE_VAL_15P9HZ 0x2f +#define MDIO_PMA_REG_84823_CTL_LED_CTL_1 0xa8e3 +#define MDIO_PMA_REG_84833_CTL_LED_CTL_1 0xa8ec +#define MDIO_PMA_REG_84823_LED3_STRETCH_EN 0x0080 /* BCM84833 only */ #define MDIO_84833_TOP_CFG_XGPHY_STRAP1 0x401a @@ -6838,26 +6852,35 @@ Theotherbitsarereservedandshouldbezero*/ #define MDIO_84833_TOP_CFG_SCRATCH_REG2 0x4007 #define MDIO_84833_TOP_CFG_SCRATCH_REG3 0x4008 #define MDIO_84833_TOP_CFG_SCRATCH_REG4 0x4009 -#define MDIO_84833_TOP_CFG_DATA3_REG 0x4011 -#define MDIO_84833_TOP_CFG_DATA4_REG 0x4012 +#define MDIO_84833_TOP_CFG_SCRATCH_REG26 0x4037 +#define MDIO_84833_TOP_CFG_SCRATCH_REG27 0x4038 +#define MDIO_84833_TOP_CFG_SCRATCH_REG28 0x4039 +#define MDIO_84833_TOP_CFG_SCRATCH_REG29 0x403a +#define MDIO_84833_TOP_CFG_SCRATCH_REG30 0x403b +#define MDIO_84833_TOP_CFG_SCRATCH_REG31 0x403c +#define MDIO_84833_CMD_HDLR_COMMAND MDIO_84833_TOP_CFG_SCRATCH_REG0 +#define MDIO_84833_CMD_HDLR_STATUS MDIO_84833_TOP_CFG_SCRATCH_REG26 +#define MDIO_84833_CMD_HDLR_DATA1 MDIO_84833_TOP_CFG_SCRATCH_REG27 +#define MDIO_84833_CMD_HDLR_DATA2 MDIO_84833_TOP_CFG_SCRATCH_REG28 +#define MDIO_84833_CMD_HDLR_DATA3 MDIO_84833_TOP_CFG_SCRATCH_REG29 +#define MDIO_84833_CMD_HDLR_DATA4 MDIO_84833_TOP_CFG_SCRATCH_REG30 +#define MDIO_84833_CMD_HDLR_DATA5 MDIO_84833_TOP_CFG_SCRATCH_REG31 /* Mailbox command set used by 84833. */ -#define PHY84833_DIAG_CMD_PAIR_SWAP_CHANGE 0x2 +#define PHY84833_CMD_SET_PAIR_SWAP 0x8001 +#define PHY84833_CMD_GET_EEE_MODE 0x8008 +#define PHY84833_CMD_SET_EEE_MODE 0x8009 /* Mailbox status set used by 84833. */ -#define PHY84833_CMD_RECEIVED 0x0001 -#define PHY84833_CMD_IN_PROGRESS 0x0002 -#define PHY84833_CMD_COMPLETE_PASS 0x0004 -#define PHY84833_CMD_COMPLETE_ERROR 0x0008 -#define PHY84833_CMD_OPEN_FOR_CMDS 0x0010 -#define PHY84833_CMD_SYSTEM_BOOT 0x0020 -#define PHY84833_CMD_NOT_OPEN_FOR_CMDS 0x0040 -#define PHY84833_CMD_CLEAR_COMPLETE 0x0080 -#define PHY84833_CMD_OPEN_OVERRIDE 0xa5a5 - +#define PHY84833_STATUS_CMD_RECEIVED 0x0001 +#define PHY84833_STATUS_CMD_IN_PROGRESS 0x0002 +#define PHY84833_STATUS_CMD_COMPLETE_PASS 0x0004 +#define PHY84833_STATUS_CMD_COMPLETE_ERROR 0x0008 +#define PHY84833_STATUS_CMD_OPEN_FOR_CMDS 0x0010 +#define PHY84833_STATUS_CMD_SYSTEM_BOOT 0x0020 +#define PHY84833_STATUS_CMD_NOT_OPEN_FOR_CMDS 0x0040 +#define PHY84833_STATUS_CMD_CLEAR_COMPLETE 0x0080 +#define PHY84833_STATUS_CMD_OPEN_OVERRIDE 0xa5a5 -/* 84833 F/W Feature Commands */ -#define PHY84833_DIAG_CMD_GET_EEE_MODE 0x27 -#define PHY84833_DIAG_CMD_SET_EEE_MODE 0x28 /* Warpcore clause 45 addressing */ #define MDIO_WC_DEVAD 0x3 |