diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/net/ethernet/broadcom/genet/bcmmii.c | 38 |
1 files changed, 36 insertions, 2 deletions
diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c index 89d16c587bb7..2d29de9a33e3 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmmii.c +++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c @@ -286,6 +286,7 @@ int bcmgenet_mii_probe(struct net_device *dev) struct bcmgenet_priv *priv = netdev_priv(dev); struct device *kdev = &priv->pdev->dev; struct device_node *dn = kdev->of_node; + phy_interface_t phy_iface = priv->phy_interface; struct phy_device *phydev; u32 phy_flags = 0; int ret; @@ -300,9 +301,42 @@ int bcmgenet_mii_probe(struct net_device *dev) priv->old_duplex = -1; priv->old_pause = -1; + /* This is an ugly quirk but we have not been correctly interpreting + * the phy_interface values and we have done that across different + * drivers, so at least we are consistent in our mistakes. + * + * When the Generic PHY driver is in use either the PHY has been + * strapped or programmed correctly by the boot loader so we should + * stick to our incorrect interpretation since we have validated it. + * + * Now when a dedicated PHY driver is in use, we need to reverse the + * meaning of the phy_interface_mode values to something that the PHY + * driver will interpret and act on such that we have two mistakes + * canceling themselves so to speak. We only do this for the two + * modes that GENET driver officially supports on Broadcom STB chips: + * PHY_INTERFACE_MODE_RGMII and PHY_INTERFACE_MODE_RGMII_TXID. Other + * modes are not *officially* supported with the boot loader and the + * scripted environment generating Device Tree blobs for those + * platforms. + * + * Note that internal PHY, MoCA and fixed-link configurations are not + * affected because they use different phy_interface_t values or the + * Generic PHY driver. + */ + switch (priv->phy_interface) { + case PHY_INTERFACE_MODE_RGMII: + phy_iface = PHY_INTERFACE_MODE_RGMII_ID; + break; + case PHY_INTERFACE_MODE_RGMII_TXID: + phy_iface = PHY_INTERFACE_MODE_RGMII_RXID; + break; + default: + break; + } + if (dn) { phydev = of_phy_connect(dev, priv->phy_dn, bcmgenet_mii_setup, - phy_flags, priv->phy_interface); + phy_flags, phy_iface); if (!phydev) { pr_err("could not attach to PHY\n"); return -ENODEV; @@ -332,7 +366,7 @@ int bcmgenet_mii_probe(struct net_device *dev) phydev->dev_flags = phy_flags; ret = phy_connect_direct(dev, phydev, bcmgenet_mii_setup, - priv->phy_interface); + phy_iface); if (ret) { pr_err("could not attach to PHY\n"); return -ENODEV; |