diff options
Diffstat (limited to 'drivers/net/ethernet/broadcom')
| -rw-r--r-- | drivers/net/ethernet/broadcom/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/net/ethernet/broadcom/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/broadcom/bgmac.c | 1422 | ||||
| -rw-r--r-- | drivers/net/ethernet/broadcom/bgmac.h | 456 |
4 files changed, 1888 insertions, 0 deletions
diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig index 3b3bf0dd0f1a..3e69b3f88099 100644 --- a/drivers/net/ethernet/broadcom/Kconfig +++ b/drivers/net/ethernet/broadcom/Kconfig @@ -130,4 +130,13 @@ config BNX2X_SRIOV Virtualization support in the 578xx and 57712 products. This allows for virtual function acceleration in virtual environments. +config BGMAC + tristate "BCMA bus GBit core support" + depends on BCMA_HOST_SOC && HAS_DMA + ---help--- + This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus. + They can be found on BCM47xx SoCs and provide gigabit ethernet. + In case of using this driver on BCM4706 it's also requires to enable + BCMA_DRIVER_GMAC_CMN to make it work. + endif # NET_VENDOR_BROADCOM diff --git a/drivers/net/ethernet/broadcom/Makefile b/drivers/net/ethernet/broadcom/Makefile index b7896051d54e..68efa1a3fb88 100644 --- a/drivers/net/ethernet/broadcom/Makefile +++ b/drivers/net/ethernet/broadcom/Makefile @@ -9,3 +9,4 @@ obj-$(CONFIG_CNIC) += cnic.o obj-$(CONFIG_BNX2X) += bnx2x/ obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o obj-$(CONFIG_TIGON3) += tg3.o +obj-$(CONFIG_BGMAC) += bgmac.o diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c new file mode 100644 index 000000000000..9bd33db7fddd --- /dev/null +++ b/drivers/net/ethernet/broadcom/bgmac.c @@ -0,0 +1,1422 @@ +/* + * Driver for (BCM4706)? GBit MAC core on BCMA bus. + * + * Copyright (C) 2012 Rafał Miłecki <zajec5@gmail.com> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bgmac.h" + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/etherdevice.h> +#include <linux/mii.h> +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> +#include <asm/mach-bcm47xx/nvram.h> + +static const struct bcma_device_id bgmac_bcma_tbl[] = { + BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_4706_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS), + BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS), + BCMA_CORETABLE_END +}; +MODULE_DEVICE_TABLE(bcma, bgmac_bcma_tbl); + +static bool bgmac_wait_value(struct bcma_device *core, u16 reg, u32 mask, + u32 value, int timeout) +{ + u32 val; + int i; + + for (i = 0; i < timeout / 10; i++) { + val = bcma_read32(core, reg); + if ((val & mask) == value) + return true; + udelay(10); + } + pr_err("Timeout waiting for reg 0x%X\n", reg); + return false; +} + +/************************************************** + * DMA + **************************************************/ + +static void bgmac_dma_tx_reset(struct bgmac *bgmac, struct bgmac_dma_ring *ring) +{ + u32 val; + int i; + + if (!ring->mmio_base) + return; + + /* Suspend DMA TX ring first. + * bgmac_wait_value doesn't support waiting for any of few values, so + * implement whole loop here. + */ + bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL, + BGMAC_DMA_TX_SUSPEND); + for (i = 0; i < 10000 / 10; i++) { + val = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_STATUS); + val &= BGMAC_DMA_TX_STAT; + if (val == BGMAC_DMA_TX_STAT_DISABLED || + val == BGMAC_DMA_TX_STAT_IDLEWAIT || + val == BGMAC_DMA_TX_STAT_STOPPED) { + i = 0; + break; + } + udelay(10); + } + if (i) + bgmac_err(bgmac, "Timeout suspending DMA TX ring 0x%X (BGMAC_DMA_TX_STAT: 0x%08X)\n", + ring->mmio_base, val); + + /* Remove SUSPEND bit */ + bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL, 0); + if (!bgmac_wait_value(bgmac->core, + ring->mmio_base + BGMAC_DMA_TX_STATUS, + BGMAC_DMA_TX_STAT, BGMAC_DMA_TX_STAT_DISABLED, + 10000)) { + bgmac_warn(bgmac, "DMA TX ring 0x%X wasn't disabled on time, waiting additional 300us\n", + ring->mmio_base); + udelay(300); + val = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_STATUS); + if ((val & BGMAC_DMA_TX_STAT) != BGMAC_DMA_TX_STAT_DISABLED) + bgmac_err(bgmac, "Reset of DMA TX ring 0x%X failed\n", + ring->mmio_base); + } +} + +static void bgmac_dma_tx_enable(struct bgmac *bgmac, + struct bgmac_dma_ring *ring) +{ + u32 ctl; + + ctl = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL); + ctl |= BGMAC_DMA_TX_ENABLE; + ctl |= BGMAC_DMA_TX_PARITY_DISABLE; + bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL, ctl); +} + +static netdev_tx_t bgmac_dma_tx_add(struct bgmac *bgmac, + struct bgmac_dma_ring *ring, + struct sk_buff *skb) +{ + struct device *dma_dev = bgmac->core->dma_dev; + struct net_device *net_dev = bgmac->net_dev; + struct bgmac_dma_desc *dma_desc; + struct bgmac_slot_info *slot; + u32 ctl0, ctl1; + int free_slots; + + if (skb->len > BGMAC_DESC_CTL1_LEN) { + bgmac_err(bgmac, "Too long skb (%d)\n", skb->len); + goto err_stop_drop; + } + + if (ring->start <= ring->end) + free_slots = ring->start - ring->end + BGMAC_TX_RING_SLOTS; + else + free_slots = ring->start - ring->end; + if (free_slots == 1) { + bgmac_err(bgmac, "TX ring is full, queue should be stopped!\n"); + netif_stop_queue(net_dev); + return NETDEV_TX_BUSY; + } + + slot = &ring->slots[ring->end]; + slot->skb = skb; + slot->dma_addr = dma_map_single(dma_dev, skb->data, skb->len, + DMA_TO_DEVICE); + if (dma_mapping_error(dma_dev, slot->dma_addr)) { + bgmac_err(bgmac, "Mapping error of skb on ring 0x%X\n", + ring->mmio_base); + goto err_stop_drop; + } + + ctl0 = BGMAC_DESC_CTL0_IOC | BGMAC_DESC_CTL0_SOF | BGMAC_DESC_CTL0_EOF; + if (ring->end == ring->num_slots - 1) + ctl0 |= BGMAC_DESC_CTL0_EOT; + ctl1 = skb->len & BGMAC_DESC_CTL1_LEN; + + dma_desc = ring->cpu_base; + dma_desc += ring->end; + dma_desc->addr_low = cpu_to_le32(lower_32_bits(slot->dma_addr)); + dma_desc->addr_high = cpu_to_le32(upper_32_bits(slot->dma_addr)); + dma_desc->ctl0 = cpu_to_le32(ctl0); + dma_desc->ctl1 = cpu_to_le32(ctl1); + + wmb(); + + /* Increase ring->end to point empty slot. We tell hardware the first + * slot it should *not* read. + */ + if (++ring->end >= BGMAC_TX_RING_SLOTS) + ring->end = 0; + bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_INDEX, + ring->end * sizeof(struct bgmac_dma_desc)); + + /* Always keep one slot free to allow detecting bugged calls. */ + if (--free_slots == 1) + netif_stop_queue(net_dev); + + return NETDEV_TX_OK; + +err_stop_drop: + netif_stop_queue(net_dev); + dev_kfree_skb(skb); + return NETDEV_TX_OK; +} + +/* Free transmitted packets */ +static void bgmac_dma_tx_free(struct bgmac *bgmac, struct bgmac_dma_ring *ring) +{ + struct device *dma_dev = bgmac->core->dma_dev; + int empty_slot; + bool freed = false; + + /* The last slot that hardware didn't consume yet */ + empty_slot = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_STATUS); + empty_slot &= BGMAC_DMA_TX_STATDPTR; + empty_slot /= sizeof(struct bgmac_dma_desc); + + while (ring->start != empty_slot) { + struct bgmac_slot_info *slot = &ring->slots[ring->start]; + + if (slot->skb) { + /* Unmap no longer used buffer */ + dma_unmap_single(dma_dev, slot->dma_addr, + slot->skb->len, DMA_TO_DEVICE); + slot->dma_addr = 0; + + /* Free memory! :) */ + dev_kfree_skb(slot->skb); + slot->skb = NULL; + } else { + bgmac_err(bgmac, "Hardware reported transmission for empty TX ring slot %d! End of ring: %d\n", + ring->start, ring->end); + } + + if (++ring->start >= BGMAC_TX_RING_SLOTS) + ring->start = 0; + freed = true; + } + + if (freed && netif_queue_stopped(bgmac->net_dev)) + netif_wake_queue(bgmac->net_dev); +} + +static void bgmac_dma_rx_reset(struct bgmac *bgmac, struct bgmac_dma_ring *ring) +{ + if (!ring->mmio_base) + return; + + bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL, 0); + if (!bgmac_wait_value(bgmac->core, + ring->mmio_base + BGMAC_DMA_RX_STATUS, + BGMAC_DMA_RX_STAT, BGMAC_DMA_RX_STAT_DISABLED, + 10000)) + bgmac_err(bgmac, "Reset of ring 0x%X RX failed\n", + ring->mmio_base); +} + +static void bgmac_dma_rx_enable(struct bgmac *bgmac, + struct bgmac_dma_ring *ring) +{ + u32 ctl; + + ctl = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL); + ctl &= BGMAC_DMA_RX_ADDREXT_MASK; + ctl |= BGMAC_DMA_RX_ENABLE; + ctl |= BGMAC_DMA_RX_PARITY_DISABLE; + ctl |= BGMAC_DMA_RX_OVERFLOW_CONT; + ctl |= BGMAC_RX_FRAME_OFFSET << BGMAC_DMA_RX_FRAME_OFFSET_SHIFT; + bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL, ctl); +} + +static int bgmac_dma_rx_skb_for_slot(struct bgmac *bgmac, + struct bgmac_slot_info *slot) +{ + struct device *dma_dev = bgmac->core->dma_dev; + struct bgmac_rx_header *rx; + + /* Alloc skb */ + slot->skb = netdev_alloc_skb(bgmac->net_dev, BGMAC_RX_BUF_SIZE); + if (!slot->skb) { + bgmac_err(bgmac, "Allocation of skb failed!\n"); + return -ENOMEM; + } + + /* Poison - if everything goes fine, hardware will overwrite it */ + rx = (struct bgmac_rx_header *)slot->skb->data; + rx->len = cpu_to_le16(0xdead); + rx->flags = cpu_to_le16(0xbeef); + + /* Map skb for the DMA */ + slot->dma_addr = dma_map_single(dma_dev, slot->skb->data, + BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE); + if (dma_mapping_error(dma_dev, slot->dma_addr)) { + bgmac_err(bgmac, "DMA mapping error\n"); + return -ENOMEM; + } + if (slot->dma_addr & 0xC0000000) + bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n"); + + return 0; +} + +static int bgmac_dma_rx_read(struct bgmac *bgmac, struct bgmac_dma_ring *ring, + int weight) +{ + u32 end_slot; + int handled = 0; + + end_slot = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_STATUS); + end_slot &= BGMAC_DMA_RX_STATDPTR; + end_slot /= sizeof(struct bgmac_dma_desc); + + ring->end = end_slot; + + while (ring->start != ring->end) { + struct device *dma_dev = bgmac->core->dma_dev; + struct bgmac_slot_info *slot = &ring->slots[ring->start]; + struct sk_buff *skb = slot->skb; + struct sk_buff *new_skb; + struct bgmac_rx_header *rx; + u16 len, flags; + + /* Unmap buffer to make it accessible to the CPU */ + dma_sync_single_for_cpu(dma_dev, slot->dma_addr, + BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE); + + /* Get info from the header */ + rx = (struct bgmac_rx_header *)skb->data; + len = le16_to_cpu(rx->len); + flags = le16_to_cpu(rx->flags); + + /* Check for poison and drop or pass the packet */ + if (len == 0xdead && flags == 0xbeef) { + bgmac_err(bgmac, "Found poisoned packet at slot %d, DMA issue!\n", + ring->start); + } else { + new_skb = netdev_alloc_skb(bgmac->net_dev, len); + if (new_skb) { + skb_put(new_skb, len); + skb_copy_from_linear_data_offset(skb, BGMAC_RX_FRAME_OFFSET, + new_skb->data, + len); + new_skb->protocol = + eth_type_trans(new_skb, bgmac->net_dev); + netif_receive_skb(new_skb); + handled++; + } else { + bgmac->net_dev->stats.rx_dropped++; + bgmac_err(bgmac, "Allocation of skb for copying packet failed!\n"); + } + + /* Poison the old skb */ + rx->len = cpu_to_le16(0xdead); + rx->flags = cpu_to_le16(0xbeef); + } + + /* Make it back accessible to the hardware */ + dma_sync_single_for_device(dma_dev, slot->dma_addr, + BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE); + + if (++ring->start >= BGMAC_RX_RING_SLOTS) + ring->start = 0; + + if (handled >= weight) /* Should never be greater */ + break; + } + + return handled; +} + +/* Does ring support unaligned addressing? */ +static bool bgmac_dma_unaligned(struct bgmac *bgmac, + struct bgmac_dma_ring *ring, + enum bgmac_dma_ring_type ring_type) +{ + switch (ring_type) { + case BGMAC_DMA_RING_TX: + bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGLO, + 0xff0); + if (bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGLO)) + return true; + break; + case BGMAC_DMA_RING_RX: + bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGLO, + 0xff0); + if (bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGLO)) + return true; + break; + } + return false; +} + +static void bgmac_dma_ring_free(struct bgmac *bgmac, + struct bgmac_dma_ring *ring) +{ + struct device *dma_dev = bgmac->core->dma_dev; + struct bgmac_slot_info *slot; + int size; + int i; + + for (i = 0; i < ring->num_slots; i++) { + slot = &ring->slots[i]; + if (slot->skb) { + if (slot->dma_addr) + dma_unmap_single(dma_dev, slot->dma_addr, + slot->skb->len, DMA_TO_DEVICE); + dev_kfree_skb(slot->skb); + } + } + + if (ring->cpu_base) { + /* Free ring of descriptors */ + size = ring->num_slots * sizeof(struct bgmac_dma_desc); + dma_free_coherent(dma_dev, size, ring->cpu_base, + ring->dma_base); + } +} + +static void bgmac_dma_free(struct bgmac *bgmac) +{ + int i; + + for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) + bgmac_dma_ring_free(bgmac, &bgmac->tx_ring[i]); + for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) + bgmac_dma_ring_free(bgmac, &bgmac->rx_ring[i]); +} + +static int bgmac_dma_alloc(struct bgmac *bgmac) +{ + struct device *dma_dev = bgmac->core->dma_dev; + struct bgmac_dma_ring *ring; + static const u16 ring_base[] = { BGMAC_DMA_BASE0, BGMAC_DMA_BASE1, + BGMAC_DMA_BASE2, BGMAC_DMA_BASE3, }; + int size; /* ring size: different for Tx and Rx */ + int err; + int i; + + BUILD_BUG_ON(BGMAC_MAX_TX_RINGS > ARRAY_SIZE(ring_base)); + BUILD_BUG_ON(BGMAC_MAX_RX_RINGS > ARRAY_SIZE(ring_base)); + + if (!(bcma_aread32(bgmac->core, BCMA_IOST) & BCMA_IOST_DMA64)) { + bgmac_err(bgmac, "Core does not report 64-bit DMA\n"); + return -ENOTSUPP; + } + + for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) { + ring = &bgmac->tx_ring[i]; + ring->num_slots = BGMAC_TX_RING_SLOTS; + ring->mmio_base = ring_base[i]; + if (bgmac_dma_unaligned(bgmac, ring, BGMAC_DMA_RING_TX)) + bgmac_warn(bgmac, "TX on ring 0x%X supports unaligned addressing but this feature is not implemented\n", + ring->mmio_base); + + /* Alloc ring of descriptors */ + size = ring->num_slots * sizeof(struct bgmac_dma_desc); + ring->cpu_base = dma_zalloc_coherent(dma_dev, size, + &ring->dma_base, + GFP_KERNEL); + if (!ring->cpu_base) { + bgmac_err(bgmac, "Allocation of TX ring 0x%X failed\n", + ring->mmio_base); + goto err_dma_free; + } + if (ring->dma_base & 0xC0000000) + bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n"); + + /* No need to alloc TX slots yet */ + } + + for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) { + ring = &bgmac->rx_ring[i]; + ring->num_slots = BGMAC_RX_RING_SLOTS; + ring->mmio_base = ring_base[i]; + if (bgmac_dma_unaligned(bgmac, ring, BGMAC_DMA_RING_RX)) + bgmac_warn(bgmac, "RX on ring 0x%X supports unaligned addressing but this feature is not implemented\n", + ring->mmio_base); + + /* Alloc ring of descriptors */ + size = ring->num_slots * sizeof(struct bgmac_dma_desc); + ring->cpu_base = dma_zalloc_coherent(dma_dev, size, + &ring->dma_base, + GFP_KERNEL); + if (!ring->cpu_base) { + bgmac_err(bgmac, "Allocation of RX ring 0x%X failed\n", + ring->mmio_base); + err = -ENOMEM; + goto err_dma_free; + } + if (ring->dma_base & 0xC0000000) + bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n"); + + /* Alloc RX slots */ + for (i = 0; i < ring->num_slots; i++) { + err = bgmac_dma_rx_skb_for_slot(bgmac, &ring->slots[i]); + if (err) { + bgmac_err(bgmac, "Can't allocate skb for slot in RX ring\n"); + goto err_dma_free; + } + } + } + + return 0; + +err_dma_free: + bgmac_dma_free(bgmac); + return -ENOMEM; +} + +static void bgmac_dma_init(struct bgmac *bgmac) +{ + struct bgmac_dma_ring *ring; + struct bgmac_dma_desc *dma_desc; + u32 ctl0, ctl1; + int i; + + for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) { + ring = &bgmac->tx_ring[i]; + + /* We don't implement unaligned addressing, so enable first */ + bgmac_dma_tx_enable(bgmac, ring); + bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGLO, + lower_32_bits(ring->dma_base)); + bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGHI, + upper_32_bits(ring->dma_base)); + + ring->start = 0; + ring->end = 0; /* Points the slot that should *not* be read */ + } + + for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) { + ring = &bgmac->rx_ring[i]; + + /* We don't implement unaligned addressing, so enable first */ + bgmac_dma_rx_enable(bgmac, ring); + bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGLO, + lower_32_bits(ring->dma_base)); + bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGHI, + upper_32_bits(ring->dma_base)); + + for (i = 0, dma_desc = ring->cpu_base; i < ring->num_slots; + i++, dma_desc++) { + ctl0 = ctl1 = 0; + + if (i == ring->num_slots - 1) + ctl0 |= BGMAC_DESC_CTL0_EOT; + ctl1 |= BGMAC_RX_BUF_SIZE & BGMAC_DESC_CTL1_LEN; + /* Is there any BGMAC device that requires extension? */ + /* ctl1 |= (addrext << B43_DMA64_DCTL1_ADDREXT_SHIFT) & + * B43_DMA64_DCTL1_ADDREXT_MASK; + */ + + dma_desc->addr_low = cpu_to_le32(lower_32_bits(ring->slots[i].dma_addr)); + dma_desc->addr_high = cpu_to_le32(upper_32_bits(ring->slots[i].dma_addr)); + dma_desc->ctl0 = cpu_to_le32(ctl0); + dma_desc->ctl1 = cpu_to_le32(ctl1); + } + + bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_INDEX, + ring->num_slots * sizeof(struct bgmac_dma_desc)); + + ring->start = 0; + ring->end = 0; + } +} + +/************************************************** + * PHY ops + **************************************************/ + +u16 bgmac_phy_read(struct bgmac *bgmac, u8 phyaddr, u8 reg) +{ + struct bcma_device *core; + u16 phy_access_addr; + u16 phy_ctl_addr; + u32 tmp; + + BUILD_BUG_ON(BGMAC_PA_DATA_MASK != BCMA_GMAC_CMN_PA_DATA_MASK); + BUILD_BUG_ON(BGMAC_PA_ADDR_MASK != BCMA_GMAC_CMN_PA_ADDR_MASK); + BUILD_BUG_ON(BGMAC_PA_ADDR_SHIFT != BCMA_GMAC_CMN_PA_ADDR_SHIFT); + BUILD_BUG_ON(BGMAC_PA_REG_MASK != BCMA_GMAC_CMN_PA_REG_MASK); + BUILD_BUG_ON(BGMAC_PA_REG_SHIFT != BCMA_GMAC_CMN_PA_REG_SHIFT); + BUILD_BUG_ON(BGMAC_PA_WRITE != BCMA_GMAC_CMN_PA_WRITE); + BUILD_BUG_ON(BGMAC_PA_START != BCMA_GMAC_CMN_PA_START); + BUILD_BUG_ON(BGMAC_PC_EPA_MASK != BCMA_GMAC_CMN_PC_EPA_MASK); + BUILD_BUG_ON(BGMAC_PC_MCT_MASK != BCMA_GMAC_CMN_PC_MCT_MASK); + BUILD_BUG_ON(BGMAC_PC_MCT_SHIFT != BCMA_GMAC_CMN_PC_MCT_SHIFT); + BUILD_BUG_ON(BGMAC_PC_MTE != BCMA_GMAC_CMN_PC_MTE); + + if (bgmac->core->id.id == BCMA_CORE_4706_MAC_GBIT) { + core = bgmac->core->bus->drv_gmac_cmn.core; + phy_access_addr = BCMA_GMAC_CMN_PHY_ACCESS; + phy_ctl_addr = BCMA_GMAC_CMN_PHY_CTL; + } else { + core = bgmac->core; + phy_access_addr = BGMAC_PHY_ACCESS; + phy_ctl_addr = BGMAC_PHY_CNTL; + } + + tmp = bcma_read32(core, phy_ctl_addr); + tmp &= ~BGMAC_PC_EPA_MASK; + tmp |= phyaddr; + bcma_write32(core, phy_ctl_addr, tmp); + + tmp = BGMAC_PA_START; + tmp |= phyaddr << BGMAC_PA_ADDR_SHIFT; + tmp |= reg << BGMAC_PA_REG_SHIFT; + bcma_write32(core, phy_access_addr, tmp); + + if (!bgmac_wait_value(core, phy_access_addr, BGMAC_PA_START, 0, 1000)) { + bgmac_err(bgmac, "Reading PHY %d register 0x%X failed\n", + phyaddr, reg); + return 0xffff; + } + + return bcma_read32(core, phy_access_addr) & BGMAC_PA_DATA_MASK; +} + +/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphywr */ +void bgmac_phy_write(struct bgmac *bgmac, u8 phyaddr, u8 reg, u16 value) +{ + struct bcma_device *core; + u16 phy_access_addr; + u16 phy_ctl_addr; + u32 tmp; + + if (bgmac->core->id.id == BCMA_CORE_4706_MAC_GBIT) { + core = bgmac->core->bus->drv_gmac_cmn.core; + phy_access_addr = BCMA_GMAC_CMN_PHY_ACCESS; + phy_ctl_addr = BCMA_GMAC_CMN_PHY_CTL; + } else { + core = bgmac->core; + phy_access_addr = BGMAC_PHY_ACCESS; + phy_ctl_addr = BGMAC_PHY_CNTL; + } + + tmp = bcma_read32(core, phy_ctl_addr); + tmp &= ~BGMAC_PC_EPA_MASK; + tmp |= phyaddr; + bcma_write32(core, phy_ctl_addr, tmp); + + bgmac_write(bgmac, BGMAC_INT_STATUS, BGMAC_IS_MDIO); + if (bgmac_read(bgmac, BGMAC_INT_STATUS) & BGMAC_IS_MDIO) + bgmac_warn(bgmac, "Error setting MDIO int\n"); + + tmp = BGMAC_PA_START; + tmp |= BGMAC_PA_WRITE; + tmp |= phyaddr << BGMAC_PA_ADDR_SHIFT; + tmp |= reg << BGMAC_PA_REG_SHIFT; + tmp |= value; + bcma_write32(core, phy_access_addr, tmp); + + if (!bgmac_wait_value(core, phy_access_addr, BGMAC_PA_START, 0, 1000)) + bgmac_err(bgmac, "Writing to PHY %d register 0x%X failed\n", + phyaddr, reg); +} + +/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyforce */ +static void bgmac_phy_force(struct bgmac *bgmac) +{ + u16 ctl; + u16 mask = ~(BGMAC_PHY_CTL_SPEED | BGMAC_PHY_CTL_SPEED_MSB | + BGMAC_PHY_CTL_ANENAB | BGMAC_PHY_CTL_DUPLEX); + + if (bgmac->phyaddr == BGMAC_PHY_NOREGS) + return; + + if (bgmac->autoneg) + return; + + ctl = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL); + ctl &= mask; + if (bgmac->full_duplex) + ctl |= BGMAC_PHY_CTL_DUPLEX; + if (bgmac->speed == BGMAC_SPEED_100) + ctl |= BGMAC_PHY_CTL_SPEED_100; + else if (bgmac->speed == BGMAC_SPEED_1000) + ctl |= BGMAC_PHY_CTL_SPEED_1000; + bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL, ctl); +} + +/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyadvertise */ +static void bgmac_phy_advertise(struct bgmac *bgmac) +{ + u16 adv; + + if (bgmac->phyaddr == BGMAC_PHY_NOREGS) + return; + + if (!bgmac->autoneg) + return; + + /* Adv selected 10/100 speeds */ + adv = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV); + adv &= ~(BGMAC_PHY_ADV_10HALF | BGMAC_PHY_ADV_10FULL | + BGMAC_PHY_ADV_100HALF | BGMAC_PHY_ADV_100FULL); + if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_10) + adv |= BGMAC_PHY_ADV_10HALF; + if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_100) + adv |= BGMAC_PHY_ADV_100HALF; + if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_10) + adv |= BGMAC_PHY_ADV_10FULL; + if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_100) + adv |= BGMAC_PHY_ADV_100FULL; + bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV, adv); + + /* Adv selected 1000 speeds */ + adv = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV2); + adv &= ~(BGMAC_PHY_ADV2_1000HALF | BGMAC_PHY_ADV2_1000FULL); + if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_1000) + adv |= BGMAC_PHY_ADV2_1000HALF; + if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_1000) + adv |= BGMAC_PHY_ADV2_1000FULL; + bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV2, adv); + + /* Restart */ + bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL, + bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL) | + BGMAC_PHY_CTL_RESTART); +} + +/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyinit */ +static void bgmac_phy_init(struct bgmac *bgmac) +{ + struct bcma_chipinfo *ci = &bgmac->core->bus->chipinfo; + struct bcma_drv_cc *cc = &bgmac->core->bus->drv_cc; + u8 i; + + if (ci->id == BCMA_CHIP_ID_BCM5356) { + for (i = 0; i < 5; i++) { + bgmac_phy_write(bgmac, i, 0x1f, 0x008b); + bgmac_phy_write(bgmac, i, 0x15, 0x0100); + bgmac_phy_write(bgmac, i, 0x1f, 0x000f); + bgmac_phy_write(bgmac, i, 0x12, 0x2aaa); + bgmac_phy_write(bgmac, i, 0x1f, 0x000b); + } + } + if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg != 10) || + (ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg != 10) || + (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg != 9)) { + bcma_chipco_chipctl_maskset(cc, 2, ~0xc0000000, 0); + bcma_chipco_chipctl_maskset(cc, 4, ~0x80000000, 0); + for (i = 0; i < 5; i++) { + bgmac_phy_write(bgmac, i, 0x1f, 0x000f); + bgmac_phy_write(bgmac, i, 0x16, 0x5284); + bgmac_phy_write(bgmac, i, 0x1f, 0x000b); + bgmac_phy_write(bgmac, i, 0x17, 0x0010); + bgmac_phy_write(bgmac, i, 0x1f, 0x000f); + bgmac_phy_write(bgmac, i, 0x16, 0x5296); + bgmac_phy_write(bgmac, i, 0x17, 0x1073); + bgmac_phy_write(bgmac, i, 0x17, 0x9073); + bgmac_phy_write(bgmac, i, 0x16, 0x52b6); + bgmac_phy_write(bgmac, i, 0x17, 0x9273); + bgmac_phy_write(bgmac, i, 0x1f, 0x000b); + } + } +} + +/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyreset */ +static void bgmac_phy_reset(struct bgmac *bgmac) +{ + if (bgmac->phyaddr == BGMAC_PHY_NOREGS) + return; + + bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL, + BGMAC_PHY_CTL_RESET); + udelay(100); + if (bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL) & + BGMAC_PHY_CTL_RESET) + bgmac_err(bgmac, "PHY reset failed\n"); + bgmac_phy_init(bgmac); +} + +/************************************************** + * Chip ops + **************************************************/ + +/* TODO: can we just drop @force? Can we don't reset MAC at all if there is + * nothing to change? Try if after stabilizng driver. + */ +static void bgmac_cmdcfg_maskset(struct bgmac *bgmac, u32 mask, u32 set, + bool force) +{ + u32 cmdcfg = bgmac_read(bgmac, BGMAC_CMDCFG); + u32 new_val = (cmdcfg & mask) | set; + + bgmac_set(bgmac, BGMAC_CMDCFG, BGMAC_CMDCFG_SR); + udelay(2); + + if (new_val != cmdcfg || force) + bgmac_write(bgmac, BGMAC_CMDCFG, new_val); + + bgmac_mask(bgmac, BGMAC_CMDCFG, ~BGMAC_CMDCFG_SR); + udelay(2); +} + +#if 0 /* We don't use that regs yet */ +static void bgmac_chip_stats_update(struct bgmac *bgmac) +{ + int i; + + if (bgmac->core->id.id != BCMA_CORE_4706_MAC_GBIT) { + for (i = 0; i < BGMAC_NUM_MIB_TX_REGS; i++) + bgmac->mib_tx_regs[i] = + bgmac_read(bgmac, + BGMAC_TX_GOOD_OCTETS + (i * 4)); + for (i = 0; i < BGMAC_NUM_MIB_RX_REGS; i++) + bgmac->mib_rx_regs[i] = + bgmac_read(bgmac, + BGMAC_RX_GOOD_OCTETS + (i * 4)); + } + + /* TODO: what else? how to handle BCM4706? Specs are needed */ +} +#endif + +static void bgmac_clear_mib(struct bgmac *bgmac) +{ + int i; + + if (bgmac->core->id.id == BCMA_CORE_4706_MAC_GBIT) + return; + + bgmac_set(bgmac, BGMAC_DEV_CTL, BGMAC_DC_MROR); + for (i = 0; i < BGMAC_NUM_MIB_TX_REGS; i++) + bgmac_read(bgmac, BGMAC_TX_GOOD_OCTETS + (i * 4)); + for (i = 0; i < BGMAC_NUM_MIB_RX_REGS; i++) + bgmac_read(bgmac, BGMAC_RX_GOOD_OCTETS + (i * 4)); +} + +/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_speed */ +static void bgmac_speed(struct bgmac *bgmac, int speed) +{ + u32 mask = ~(BGMAC_CMDCFG_ES_MASK | BGMAC_CMDCFG_HD); + u32 set = 0; + + if (speed & BGMAC_SPEED_10) + set |= BGMAC_CMDCFG_ES_10; + if (speed & BGMAC_SPEED_100) + set |= BGMAC_CMDCFG_ES_100; + if (speed & BGMAC_SPEED_1000) + set |= BGMAC_CMDCFG_ES_1000; + if (!bgmac->full_duplex) + set |= BGMAC_CMDCFG_HD; + bgmac_cmdcfg_maskset(bgmac, mask, set, true); +} + +static void bgmac_miiconfig(struct bgmac *bgmac) +{ + u8 imode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & BGMAC_DS_MM_MASK) >> + BGMAC_DS_MM_SHIFT; + if (imode == 0 || imode == 1) { + if (bgmac->autoneg) + bgmac_speed(bgmac, BGMAC_SPEED_100); + else + bgmac_speed(bgmac, bgmac->speed); + } +} + +/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipreset */ +static void bgmac_chip_reset(struct bgmac *bgmac) +{ + struct bcma_device *core = bgmac->core; + struct bcma_bus *bus = core->bus; + struct bcma_chipinfo *ci = &bus->chipinfo; + u32 flags = 0; + u32 iost; + int i; + + if (bcma_core_is_enabled(core)) { + if (!bgmac->stats_grabbed) { + /* bgmac_chip_stats_update(bgmac); */ + bgmac->stats_grabbed = true; + } + + for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) + bgmac_dma_tx_reset(bgmac, &bgmac->tx_ring[i]); + + bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_ML, false); + udelay(1); + + for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) + bgmac_dma_rx_reset(bgmac, &bgmac->rx_ring[i]); + + /* TODO: Clear software multicast filter list */ + } + + iost = bcma_aread32(core, BCMA_IOST); + if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == 10) || + (ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg == 10) || + (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg == 9)) + iost &= ~BGMAC_BCMA_IOST_ATTACHED; + + if (iost & BGMAC_BCMA_IOST_ATTACHED) { + flags = BGMAC_BCMA_IOCTL_SW_CLKEN; + if (!bgmac->has_robosw) + flags |= BGMAC_BCMA_IOCTL_SW_RESET; + } + + bcma_core_enable(core, flags); + + if (core->id.rev > 2) { + bgmac_set(bgmac, BCMA_CLKCTLST, 1 << 8); + bgmac_wait_value(bgmac->core, BCMA_CLKCTLST, 1 << 24, 1 << 24, + 1000); + } + + if (ci->id == BCMA_CHIP_ID_BCM5357 || ci->id == BCMA_CHIP_ID_BCM4749 || + ci->id == BCMA_CHIP_ID_BCM53572) { + struct bcma_drv_cc *cc = &bgmac->core->bus->drv_cc; + u8 et_swtype = 0; + u8 sw_type = BGMAC_CHIPCTL_1_SW_TYPE_EPHY | + BGMAC_CHIPCTL_1_IF_TYPE_RMII; + char buf[2]; + + if (nvram_getenv("et_swtype", buf, 1) > 0) { + if (kstrtou8(buf, 0, &et_swtype)) + bgmac_err(bgmac, "Failed to parse et_swtype (%s)\n", + buf); + et_swtype &= 0x0f; + et_swtype <<= 4; + sw_type = et_swtype; + } else if (ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == 9) { + sw_type = BGMAC_CHIPCTL_1_SW_TYPE_EPHYRMII; + } else if (0) { + /* TODO */ + } + bcma_chipco_chipctl_maskset(cc, 1, + ~(BGMAC_CHIPCTL_1_IF_TYPE_MASK | + BGMAC_CHIPCTL_1_SW_TYPE_MASK), + sw_type); + } + + if (iost & BGMAC_BCMA_IOST_ATTACHED && !bgmac->has_robosw) + bcma_awrite32(core, BCMA_IOCTL, + bcma_aread32(core, BCMA_IOCTL) & + ~BGMAC_BCMA_IOCTL_SW_RESET); + + /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_reset + * Specs don't say about using BGMAC_CMDCFG_SR, but in this routine + * BGMAC_CMDCFG is read _after_ putting chip in a reset. So it has to + * be keps until taking MAC out of the reset. + */ + bgmac_cmdcfg_maskset(bgmac, + ~(BGMAC_CMDCFG_TE | + BGMAC_CMDCFG_RE | + BGMAC_CMDCFG_RPI | + BGMAC_CMDCFG_TAI | + BGMAC_CMDCFG_HD | + BGMAC_CMDCFG_ML | + BGMAC_CMDCFG_CFE | + BGMAC_CMDCFG_RL | + BGMAC_CMDCFG_RED | + BGMAC_CMDCFG_PE | + BGMAC_CMDCFG_TPI | + BGMAC_CMDCFG_PAD_EN | + BGMAC_CMDCFG_PF), + BGMAC_CMDCFG_PROM | + BGMAC_CMDCFG_NLC | + BGMAC_CMDCFG_CFE | + BGMAC_CMDCFG_SR, + false); + + bgmac_clear_mib(bgmac); + if (core->id.id == BCMA_CORE_4706_MAC_GBIT) + bcma_maskset32(bgmac->cmn, BCMA_GMAC_CMN_PHY_CTL, ~0, + BCMA_GMAC_CMN_PC_MTE); + else + bgmac_set(bgmac, BGMAC_PHY_CNTL, BGMAC_PC_MTE); + bgmac_miiconfig(bgmac); + bgmac_phy_init(bgmac); + + bgmac->int_status = 0; +} + +static void bgmac_chip_intrs_on(struct bgmac *bgmac) +{ + bgmac_write(bgmac, BGMAC_INT_MASK, bgmac->int_mask); +} + +static void bgmac_chip_intrs_off(struct bgmac *bgmac) +{ + bgmac_write(bgmac, BGMAC_INT_MASK, 0); +} + +/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_enable */ +static void bgmac_enable(struct bgmac *bgmac) +{ + struct bcma_chipinfo *ci = &bgmac->core->bus->chipinfo; + u32 cmdcfg; + u32 mode; + u32 rxq_ctl; + u32 fl_ctl; + u16 bp_clk; + u8 mdp; + + cmdcfg = bgmac_read(bgmac, BGMAC_CMDCFG); + bgmac_cmdcfg_maskset(bgmac, ~(BGMAC_CMDCFG_TE | BGMAC_CMDCFG_RE), + BGMAC_CMDCFG_SR, true); + udelay(2); + cmdcfg |= BGMAC_CMDCFG_TE | BGMAC_CMDCFG_RE; + bgmac_write(bgmac, BGMAC_CMDCFG, cmdcfg); + + mode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & BGMAC_DS_MM_MASK) >> + BGMAC_DS_MM_SHIFT; + if (ci->id != BCMA_CHIP_ID_BCM47162 || mode != 0) + bgmac_set(bgmac, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT); + if (ci->id == BCMA_CHIP_ID_BCM47162 && mode == 2) + bcma_chipco_chipctl_maskset(&bgmac->core->bus->drv_cc, 1, ~0, + BGMAC_CHIPCTL_1_RXC_DLL_BYPASS); + + switch (ci->id) { + case BCMA_CHIP_ID_BCM5357: + case BCMA_CHIP_ID_BCM4749: + case BCMA_CHIP_ID_BCM53572: + case BCMA_CHIP_ID_BCM4716: + case BCMA_CHIP_ID_BCM47162: + fl_ctl = 0x03cb04cb; + if (ci->id == BCMA_CHIP_ID_BCM5357 || + ci->id == BCMA_CHIP_ID_BCM4749 || + ci->id == BCMA_CHIP_ID_BCM53572) + fl_ctl = 0x2300e1; + bgmac_write(bgmac, BGMAC_FLOW_CTL_THRESH, fl_ctl); + bgmac_write(bgmac, BGMAC_PAUSE_CTL, 0x27fff); + break; + } + + rxq_ctl = bgmac_read(bgmac, BGMAC_RXQ_CTL); + rxq_ctl &= ~BGMAC_RXQ_CTL_MDP_MASK; + bp_clk = bcma_pmu_get_bus_clock(&bgmac->core->bus->drv_cc) / 1000000; + mdp = (bp_clk * 128 / 1000) - 3; + rxq_ctl |= (mdp << BGMAC_RXQ_CTL_MDP_SHIFT); + bgmac_write(bgmac, BGMAC_RXQ_CTL, rxq_ctl); +} + +/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipinit */ +static void bgmac_chip_init(struct bgmac *bgmac, bool full_init) +{ + struct bgmac_dma_ring *ring; + u8 *mac = bgmac->net_dev->dev_addr; + u32 tmp; + int i; + + /* 1 interrupt per received frame */ + bgmac_write(bgmac, BGMAC_INT_RECV_LAZY, 1 << BGMAC_IRL_FC_SHIFT); + + /* Enable 802.3x tx flow control (honor received PAUSE frames) */ + bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_RPI, 0, true); + + if (bgmac->net_dev->flags & IFF_PROMISC) + bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_PROM, false); + else + bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_PROM, 0, false); + + /* Set MAC addr */ + tmp = (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3]; + bgmac_write(bgmac, BGMAC_MACADDR_HIGH, tmp); + tmp = (mac[4] << 8) | mac[5]; + bgmac_write(bgmac, BGMAC_MACADDR_LOW, tmp); + + if (bgmac->loopback) + bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_ML, true); + else + bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_ML, 0, true); + + bgmac_write(bgmac, BGMAC_RXMAX_LENGTH, 32 + ETHER_MAX_LEN); + + if (!bgmac->autoneg) { + bgmac_speed(bgmac, bgmac->speed); + bgmac_phy_force(bgmac); + } else if (bgmac->speed) { /* if there is anything to adv */ + bgmac_phy_advertise(bgmac); + } + + if (full_init) { + bgmac_dma_init(bgmac); + if (1) /* FIXME: is there any case we don't want IRQs? */ + bgmac_chip_intrs_on(bgmac); + } else { + for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) { + ring = &bgmac->rx_ring[i]; + bgmac_dma_rx_enable(bgmac, ring); + } + } + + bgmac_enable(bgmac); +} + +static irqreturn_t bgmac_interrupt(int irq, void *dev_id) +{ + struct bgmac *bgmac = netdev_priv(dev_id); + + u32 int_status = bgmac_read(bgmac, BGMAC_INT_STATUS); + int_status &= bgmac->int_mask; + + if (!int_status) + return IRQ_NONE; + + /* Ack */ + bgmac_write(bgmac, BGMAC_INT_STATUS, int_status); + + /* Disable new interrupts until handling existing ones */ + bgmac_chip_intrs_off(bgmac); + + bgmac->int_status = int_status; + + napi_schedule(&bgmac->napi); + + return IRQ_HANDLED; +} + +static int bgmac_poll(struct napi_struct *napi, int weight) +{ + struct bgmac *bgmac = container_of(napi, struct bgmac, napi); + struct bgmac_dma_ring *ring; + int handled = 0; + + if (bgmac->int_status & BGMAC_IS_TX0) { + ring = &bgmac->tx_ring[0]; + bgmac_dma_tx_free(bgmac, ring); + bgmac->int_status &= ~BGMAC_IS_TX0; + } + + if (bgmac->int_status & BGMAC_IS_RX) { + ring = &bgmac->rx_ring[0]; + handled += bgmac_dma_rx_read(bgmac, ring, weight); + bgmac->int_status &= ~BGMAC_IS_RX; + } + + if (bgmac->int_status) { + bgmac_err(bgmac, "Unknown IRQs: 0x%08X\n", bgmac->int_status); + bgmac->int_status = 0; + } + + if (handled < weight) + napi_complete(napi); + + bgmac_chip_intrs_on(bgmac); + + return handled; +} + +/************************************************** + * net_device_ops + **************************************************/ + +static int bgmac_open(struct net_device *net_dev) +{ + struct bgmac *bgmac = netdev_priv(net_dev); + int err = 0; + + bgmac_chip_reset(bgmac); + /* Specs say about reclaiming rings here, but we do that in DMA init */ + bgmac_chip_init(bgmac, true); + + err = request_irq(bgmac->core->irq, bgmac_interrupt, IRQF_SHARED, + KBUILD_MODNAME, net_dev); + if (err < 0) { + bgmac_err(bgmac, "IRQ request error: %d!\n", err); + goto err_out; + } + napi_enable(&bgmac->napi); + + netif_carrier_on(net_dev); + +err_out: + return err; +} + +static int bgmac_stop(struct net_device *net_dev) +{ + struct bgmac *bgmac = netdev_priv(net_dev); + + netif_carrier_off(net_dev); + + napi_disable(&bgmac->napi); + bgmac_chip_intrs_off(bgmac); + free_irq(bgmac->core->irq, net_dev); + + bgmac_chip_reset(bgmac); + + return 0; +} + +static netdev_tx_t bgmac_start_xmit(struct sk_buff *skb, + struct net_device *net_dev) +{ + struct bgmac *bgmac = netdev_priv(net_dev); + struct bgmac_dma_ring *ring; + + /* No QOS support yet */ + ring = &bgmac->tx_ring[0]; + return bgmac_dma_tx_add(bgmac, ring, skb); +} + +static int bgmac_ioctl(struct net_device *net_dev, struct ifreq *ifr, int cmd) +{ + struct bgmac *bgmac = netdev_priv(net_dev); + struct mii_ioctl_data *data = if_mii(ifr); + + switch (cmd) { + case SIOCGMIIPHY: + data->phy_id = bgmac->phyaddr; + /* fallthru */ + case SIOCGMIIREG: + if (!netif_running(net_dev)) + return -EAGAIN; + data->val_out = bgmac_phy_read(bgmac, data->phy_id, + data->reg_num & 0x1f); + return 0; + case SIOCSMIIREG: + if (!netif_running(net_dev)) + return -EAGAIN; + bgmac_phy_write(bgmac, data->phy_id, data->reg_num & 0x1f, + data->val_in); + return 0; + default: + return -EOPNOTSUPP; + } +} + +static const struct net_device_ops bgmac_netdev_ops = { + .ndo_open = bgmac_open, + .ndo_stop = bgmac_stop, + .ndo_start_xmit = bgmac_start_xmit, + .ndo_set_mac_address = eth_mac_addr, /* generic, sets dev_addr */ + .ndo_do_ioctl = bgmac_ioctl, +}; + +/************************************************** + * ethtool_ops + **************************************************/ + +static int bgmac_get_settings(struct net_device *net_dev, + struct ethtool_cmd *cmd) +{ + struct bgmac *bgmac = netdev_priv(net_dev); + + cmd->supported = SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full | + SUPPORTED_Autoneg; + + if (bgmac->autoneg) { + WARN_ON(cmd->advertising); + if (bgmac->full_duplex) { + if (bgmac->speed & BGMAC_SPEED_10) + cmd->advertising |= ADVERTISED_10baseT_Full; + if (bgmac->speed & BGMAC_SPEED_100) + cmd->advertising |= ADVERTISED_100baseT_Full; + if (bgmac->speed & BGMAC_SPEED_1000) + cmd->advertising |= ADVERTISED_1000baseT_Full; + } else { + if (bgmac->speed & BGMAC_SPEED_10) + cmd->advertising |= ADVERTISED_10baseT_Half; + if (bgmac->speed & BGMAC_SPEED_100) + cmd->advertising |= ADVERTISED_100baseT_Half; + if (bgmac->speed & BGMAC_SPEED_1000) + cmd->advertising |= ADVERTISED_1000baseT_Half; + } + } else { + switch (bgmac->speed) { + case BGMAC_SPEED_10: + ethtool_cmd_speed_set(cmd, SPEED_10); + break; + case BGMAC_SPEED_100: + ethtool_cmd_speed_set(cmd, SPEED_100); + break; + case BGMAC_SPEED_1000: + ethtool_cmd_speed_set(cmd, SPEED_1000); + break; + } + } + + cmd->duplex = bgmac->full_duplex ? DUPLEX_FULL : DUPLEX_HALF; + + cmd->autoneg = bgmac->autoneg; + + return 0; +} + +#if 0 +static int bgmac_set_settings(struct net_device *net_dev, + struct ethtool_cmd *cmd) +{ + struct bgmac *bgmac = netdev_priv(net_dev); + + return -1; +} +#endif + +static void bgmac_get_drvinfo(struct net_device *net_dev, + struct ethtool_drvinfo *info) +{ + strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver)); + strlcpy(info->bus_info, "BCMA", sizeof(info->bus_info)); +} + +static const struct ethtool_ops bgmac_ethtool_ops = { + .get_settings = bgmac_get_settings, + .get_drvinfo = bgmac_get_drvinfo, +}; + +/************************************************** + * BCMA bus ops + **************************************************/ + +/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipattach */ +static int bgmac_probe(struct bcma_device *core) +{ + struct net_device *net_dev; + struct bgmac *bgmac; + struct ssb_sprom *sprom = &core->bus->sprom; + u8 *mac = core->core_unit ? sprom->et1mac : sprom->et0mac; + int err; + + /* We don't support 2nd, 3rd, ... units, SPROM has to be adjusted */ + if (core->core_unit > 1) { + pr_err("Unsupported core_unit %d\n", core->core_unit); + return -ENOTSUPP; + } + + /* Allocation and references */ + net_dev = alloc_etherdev(sizeof(*bgmac)); + if (!net_dev) + return -ENOMEM; + net_dev->netdev_ops = &bgmac_netdev_ops; + net_dev->irq = core->irq; + SET_ETHTOOL_OPS(net_dev, &bgmac_ethtool_ops); + bgmac = netdev_priv(net_dev); + bgmac->net_dev = net_dev; + bgmac->core = core; + bcma_set_drvdata(core, bgmac); + + /* Defaults */ + bgmac->autoneg = true; + bgmac->full_duplex = true; + bgmac->speed = BGMAC_SPEED_10 | BGMAC_SPEED_100 | BGMAC_SPEED_1000; + memcpy(bgmac->net_dev->dev_addr, mac, ETH_ALEN); + + /* On BCM4706 we need common core to access PHY */ + if (core->id.id == BCMA_CORE_4706_MAC_GBIT && + !core->bus->drv_gmac_cmn.core) { + bgmac_err(bgmac, "GMAC CMN core not found (required for BCM4706)\n"); + err = -ENODEV; + goto err_netdev_free; + } + bgmac->cmn = core->bus->drv_gmac_cmn.core; + + bgmac->phyaddr = core->core_unit ? sprom->et1phyaddr : + sprom->et0phyaddr; + bgmac->phyaddr &= BGMAC_PHY_MASK; + if (bgmac->phyaddr == BGMAC_PHY_MASK) { + bgmac_err(bgmac, "No PHY found\n"); + err = -ENODEV; + goto err_netdev_free; + } + bgmac_info(bgmac, "Found PHY addr: %d%s\n", bgmac->phyaddr, + bgmac->phyaddr == BGMAC_PHY_NOREGS ? " (NOREGS)" : ""); + + if (core->bus->hosttype == BCMA_HOSTTYPE_PCI) { + bgmac_err(bgmac, "PCI setup not implemented\n"); + err = -ENOTSUPP; + goto err_netdev_free; + } + + bgmac_chip_reset(bgmac); + + err = bgmac_dma_alloc(bgmac); + if (err) { + bgmac_err(bgmac, "Unable to alloc memory for DMA\n"); + goto err_netdev_free; + } + + bgmac->int_mask = BGMAC_IS_ERRMASK | BGMAC_IS_RX | BGMAC_IS_TX_MASK; + if (nvram_getenv("et0_no_txint", NULL, 0) == 0) + bgmac->int_mask &= ~BGMAC_IS_TX_MASK; + + /* TODO: reset the external phy. Specs are needed */ + bgmac_phy_reset(bgmac); + + bgmac->has_robosw = !!(core->bus->sprom.boardflags_lo & + BGMAC_BFL_ENETROBO); + if (bgmac->has_robosw) + bgmac_warn(bgmac, "Support for Roboswitch not implemented\n"); + + if (core->bus->sprom.boardflags_lo & BGMAC_BFL_ENETADM) + bgmac_warn(bgmac, "Support for ADMtek ethernet switch not implemented\n"); + + err = register_netdev(bgmac->net_dev); + if (err) { + bgmac_err(bgmac, "Cannot register net device\n"); + err = -ENOTSUPP; + goto err_dma_free; + } + + netif_carrier_off(net_dev); + + netif_napi_add(net_dev, &bgmac->napi, bgmac_poll, BGMAC_WEIGHT); + + return 0; + +err_dma_free: + bgmac_dma_free(bgmac); + +err_netdev_free: + bcma_set_drvdata(core, NULL); + free_netdev(net_dev); + + return err; +} + +static void bgmac_remove(struct bcma_device *core) +{ + struct bgmac *bgmac = bcma_get_drvdata(core); + + netif_napi_del(&bgmac->napi); + unregister_netdev(bgmac->net_dev); + bgmac_dma_free(bgmac); + bcma_set_drvdata(core, NULL); + free_netdev(bgmac->net_dev); +} + +static struct bcma_driver bgmac_bcma_driver = { + .name = KBUILD_MODNAME, + .id_table = bgmac_bcma_tbl, + .probe = bgmac_probe, + .remove = bgmac_remove, +}; + +static int __init bgmac_init(void) +{ + int err; + + err = bcma_driver_register(&bgmac_bcma_driver); + if (err) + return err; + pr_info("Broadcom 47xx GBit MAC driver loaded\n"); + + return 0; +} + +static void __exit bgmac_exit(void) +{ + bcma_driver_unregister(&bgmac_bcma_driver); +} + +module_init(bgmac_init) +module_exit(bgmac_exit) + +MODULE_AUTHOR("Rafał Miłecki"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/broadcom/bgmac.h b/drivers/net/ethernet/broadcom/bgmac.h new file mode 100644 index 000000000000..129947017041 --- /dev/null +++ b/drivers/net/ethernet/broadcom/bgmac.h @@ -0,0 +1,456 @@ +#ifndef _BGMAC_H +#define _BGMAC_H + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#define bgmac_err(bgmac, fmt, ...) \ + dev_err(&(bgmac)->core->dev, fmt, ##__VA_ARGS__) +#define bgmac_warn(bgmac, fmt, ...) \ + dev_warn(&(bgmac)->core->dev, fmt, ##__VA_ARGS__) +#define bgmac_info(bgmac, fmt, ...) \ + dev_info(&(bgmac)->core->dev, fmt, ##__VA_ARGS__) +#define bgmac_dbg(bgmac, fmt, ...) \ + dev_dbg(&(bgmac)->core->dev, fmt, ##__VA_ARGS__) + +#include <linux/bcma/bcma.h> +#include <linux/netdevice.h> + +#define BGMAC_DEV_CTL 0x000 +#define BGMAC_DC_TSM 0x00000002 +#define BGMAC_DC_CFCO 0x00000004 +#define BGMAC_DC_RLSS 0x00000008 +#define BGMAC_DC_MROR 0x00000010 +#define BGMAC_DC_FCM_MASK 0x00000060 +#define BGMAC_DC_FCM_SHIFT 5 +#define BGMAC_DC_NAE 0x00000080 +#define BGMAC_DC_TF 0x00000100 +#define BGMAC_DC_RDS_MASK 0x00030000 +#define BGMAC_DC_RDS_SHIFT 16 +#define BGMAC_DC_TDS_MASK 0x000c0000 +#define BGMAC_DC_TDS_SHIFT 18 +#define BGMAC_DEV_STATUS 0x004 /* Configuration of the interface */ +#define BGMAC_DS_RBF 0x00000001 +#define BGMAC_DS_RDF 0x00000002 +#define BGMAC_DS_RIF 0x00000004 +#define BGMAC_DS_TBF 0x00000008 +#define BGMAC_DS_TDF 0x00000010 +#define BGMAC_DS_TIF 0x00000020 +#define BGMAC_DS_PO 0x00000040 +#define BGMAC_DS_MM_MASK 0x00000300 /* Mode of the interface */ +#define BGMAC_DS_MM_SHIFT 8 +#define BGMAC_BIST_STATUS 0x00c +#define BGMAC_INT_STATUS 0x020 /* Interrupt status */ +#define BGMAC_IS_MRO 0x00000001 +#define BGMAC_IS_MTO 0x00000002 +#define BGMAC_IS_TFD 0x00000004 +#define BGMAC_IS_LS 0x00000008 +#define BGMAC_IS_MDIO 0x00000010 +#define BGMAC_IS_MR 0x00000020 +#define BGMAC_IS_MT 0x00000040 +#define BGMAC_IS_TO 0x00000080 +#define BGMAC_IS_DESC_ERR 0x00000400 /* Descriptor error */ +#define BGMAC_IS_DATA_ERR 0x00000800 /* Data error */ +#define BGMAC_IS_DESC_PROT_ERR 0x00001000 /* Descriptor protocol error */ +#define BGMAC_IS_RX_DESC_UNDERF 0x00002000 /* Receive descriptor underflow */ +#define BGMAC_IS_RX_F_OVERF 0x00004000 /* Receive FIFO overflow */ +#define BGMAC_IS_TX_F_UNDERF 0x00008000 /* Transmit FIFO underflow */ +#define BGMAC_IS_RX 0x00010000 /* Interrupt for RX queue 0 */ +#define BGMAC_IS_TX0 0x01000000 /* Interrupt for TX queue 0 */ +#define BGMAC_IS_TX1 0x02000000 /* Interrupt for TX queue 1 */ +#define BGMAC_IS_TX2 0x04000000 /* Interrupt for TX queue 2 */ +#define BGMAC_IS_TX3 0x08000000 /* Interrupt for TX queue 3 */ +#define BGMAC_IS_TX_MASK 0x0f000000 +#define BGMAC_IS_INTMASK 0x0f01fcff +#define BGMAC_IS_ERRMASK 0x0000fc00 +#define BGMAC_INT_MASK 0x024 /* Interrupt mask */ +#define BGMAC_GP_TIMER 0x028 +#define BGMAC_INT_RECV_LAZY 0x100 +#define BGMAC_IRL_TO_MASK 0x00ffffff +#define BGMAC_IRL_FC_MASK 0xff000000 +#define BGMAC_IRL_FC_SHIFT 24 /* Shift the number of interrupts triggered per received frame */ +#define BGMAC_FLOW_CTL_THRESH 0x104 /* Flow control thresholds */ +#define BGMAC_WRRTHRESH 0x108 +#define BGMAC_GMAC_IDLE_CNT_THRESH 0x10c +#define BGMAC_PHY_ACCESS 0x180 /* PHY access address */ +#define BGMAC_PA_DATA_MASK 0x0000ffff +#define BGMAC_PA_ADDR_MASK 0x001f0000 +#define BGMAC_PA_ADDR_SHIFT 16 +#define BGMAC_PA_REG_MASK 0x1f000000 +#define BGMAC_PA_REG_SHIFT 24 +#define BGMAC_PA_WRITE 0x20000000 +#define BGMAC_PA_START 0x40000000 +#define BGMAC_PHY_CNTL 0x188 /* PHY control address */ +#define BGMAC_PC_EPA_MASK 0x0000001f +#define BGMAC_PC_MCT_MASK 0x007f0000 +#define BGMAC_PC_MCT_SHIFT 16 +#define BGMAC_PC_MTE 0x00800000 +#define BGMAC_TXQ_CTL 0x18c +#define BGMAC_TXQ_CTL_DBT_MASK 0x00000fff +#define BGMAC_TXQ_CTL_DBT_SHIFT 0 +#define BGMAC_RXQ_CTL 0x190 +#define BGMAC_RXQ_CTL_DBT_MASK 0x00000fff +#define BGMAC_RXQ_CTL_DBT_SHIFT 0 +#define BGMAC_RXQ_CTL_PTE 0x00001000 +#define BGMAC_RXQ_CTL_MDP_MASK 0x3f000000 +#define BGMAC_RXQ_CTL_MDP_SHIFT 24 +#define BGMAC_GPIO_SELECT 0x194 +#define BGMAC_GPIO_OUTPUT_EN 0x198 +/* For 0x1e0 see BCMA_CLKCTLST */ +#define BGMAC_HW_WAR 0x1e4 +#define BGMAC_PWR_CTL 0x1e8 +#define BGMAC_DMA_BASE0 0x200 /* Tx and Rx controller */ +#define BGMAC_DMA_BASE1 0x240 /* Tx controller only */ +#define BGMAC_DMA_BASE2 0x280 /* Tx controller only */ +#define BGMAC_DMA_BASE3 0x2C0 /* Tx controller only */ +#define BGMAC_TX_GOOD_OCTETS 0x300 +#define BGMAC_TX_GOOD_OCTETS_HIGH 0x304 +#define BGMAC_TX_GOOD_PKTS 0x308 +#define BGMAC_TX_OCTETS 0x30c +#define BGMAC_TX_OCTETS_HIGH 0x310 +#define BGMAC_TX_PKTS 0x314 +#define BGMAC_TX_BROADCAST_PKTS 0x318 +#define BGMAC_TX_MULTICAST_PKTS 0x31c +#define BGMAC_TX_LEN_64 0x320 +#define BGMAC_TX_LEN_65_TO_127 0x324 +#define BGMAC_TX_LEN_128_TO_255 0x328 +#define BGMAC_TX_LEN_256_TO_511 0x32c +#define BGMAC_TX_LEN_512_TO_1023 0x330 +#define BGMAC_TX_LEN_1024_TO_1522 0x334 +#define BGMAC_TX_LEN_1523_TO_2047 0x338 +#define BGMAC_TX_LEN_2048_TO_4095 0x33c +#define BGMAC_TX_LEN_4095_TO_8191 0x340 +#define BGMAC_TX_LEN_8192_TO_MAX 0x344 +#define BGMAC_TX_JABBER_PKTS 0x348 /* Error */ +#define BGMAC_TX_OVERSIZE_PKTS 0x34c /* Error */ +#define BGMAC_TX_FRAGMENT_PKTS 0x350 +#define BGMAC_TX_UNDERRUNS 0x354 /* Error */ +#define BGMAC_TX_TOTAL_COLS 0x358 +#define BGMAC_TX_SINGLE_COLS 0x35c +#define BGMAC_TX_MULTIPLE_COLS 0x360 +#define BGMAC_TX_EXCESSIVE_COLS 0x364 /* Error */ +#define BGMAC_TX_LATE_COLS 0x368 /* Error */ +#define BGMAC_TX_DEFERED 0x36c +#define BGMAC_TX_CARRIER_LOST 0x370 +#define BGMAC_TX_PAUSE_PKTS 0x374 +#define BGMAC_TX_UNI_PKTS 0x378 +#define BGMAC_TX_Q0_PKTS 0x37c +#define BGMAC_TX_Q0_OCTETS 0x380 +#define BGMAC_TX_Q0_OCTETS_HIGH 0x384 +#define BGMAC_TX_Q1_PKTS 0x388 +#define BGMAC_TX_Q1_OCTETS 0x38c +#define BGMAC_TX_Q1_OCTETS_HIGH 0x390 +#define BGMAC_TX_Q2_PKTS 0x394 +#define BGMAC_TX_Q2_OCTETS 0x398 +#define BGMAC_TX_Q2_OCTETS_HIGH 0x39c +#define BGMAC_TX_Q3_PKTS 0x3a0 +#define BGMAC_TX_Q3_OCTETS 0x3a4 +#define BGMAC_TX_Q3_OCTETS_HIGH 0x3a8 +#define BGMAC_RX_GOOD_OCTETS 0x3b0 +#define BGMAC_RX_GOOD_OCTETS_HIGH 0x3b4 +#define BGMAC_RX_GOOD_PKTS 0x3b8 +#define BGMAC_RX_OCTETS 0x3bc +#define BGMAC_RX_OCTETS_HIGH 0x3c0 +#define BGMAC_RX_PKTS 0x3c4 +#define BGMAC_RX_BROADCAST_PKTS 0x3c8 +#define BGMAC_RX_MULTICAST_PKTS 0x3cc +#define BGMAC_RX_LEN_64 0x3d0 +#define BGMAC_RX_LEN_65_TO_127 0x3d4 +#define BGMAC_RX_LEN_128_TO_255 0x3d8 +#define BGMAC_RX_LEN_256_TO_511 0x3dc +#define BGMAC_RX_LEN_512_TO_1023 0x3e0 +#define BGMAC_RX_LEN_1024_TO_1522 0x3e4 +#define BGMAC_RX_LEN_1523_TO_2047 0x3e8 +#define BGMAC_RX_LEN_2048_TO_4095 0x3ec +#define BGMAC_RX_LEN_4095_TO_8191 0x3f0 +#define BGMAC_RX_LEN_8192_TO_MAX 0x3f4 +#define BGMAC_RX_JABBER_PKTS 0x3f8 /* Error */ +#define BGMAC_RX_OVERSIZE_PKTS 0x3fc /* Error */ +#define BGMAC_RX_FRAGMENT_PKTS 0x400 +#define BGMAC_RX_MISSED_PKTS 0x404 /* Error */ +#define BGMAC_RX_CRC_ALIGN_ERRS 0x408 /* Error */ +#define BGMAC_RX_UNDERSIZE 0x40c /* Error */ +#define BGMAC_RX_CRC_ERRS 0x410 /* Error */ +#define BGMAC_RX_ALIGN_ERRS 0x414 /* Error */ +#define BGMAC_RX_SYMBOL_ERRS 0x418 /* Error */ +#define BGMAC_RX_PAUSE_PKTS 0x41c +#define BGMAC_RX_NONPAUSE_PKTS 0x420 +#define BGMAC_RX_SACHANGES 0x424 +#define BGMAC_RX_UNI_PKTS 0x428 +#define BGMAC_UNIMAC_VERSION 0x800 +#define BGMAC_HDBKP_CTL 0x804 +#define BGMAC_CMDCFG 0x808 /* Configuration */ +#define BGMAC_CMDCFG_TE 0x00000001 /* Set to activate TX */ +#define BGMAC_CMDCFG_RE 0x00000002 /* Set to activate RX */ +#define BGMAC_CMDCFG_ES_MASK 0x0000000c /* Ethernet speed see gmac_speed */ +#define BGMAC_CMDCFG_ES_10 0x00000000 +#define BGMAC_CMDCFG_ES_100 0x00000004 +#define BGMAC_CMDCFG_ES_1000 0x00000008 +#define BGMAC_CMDCFG_PROM 0x00000010 /* Set to activate promiscuous mode */ +#define BGMAC_CMDCFG_PAD_EN 0x00000020 +#define BGMAC_CMDCFG_CF 0x00000040 +#define BGMAC_CMDCFG_PF 0x00000080 +#define BGMAC_CMDCFG_RPI 0x00000100 /* Unset to enable 802.3x tx flow control */ +#define BGMAC_CMDCFG_TAI 0x00000200 +#define BGMAC_CMDCFG_HD 0x00000400 /* Set if in half duplex mode */ +#define BGMAC_CMDCFG_HD_SHIFT 10 +#define BGMAC_CMDCFG_SR 0x00000800 /* Set to reset mode */ +#define BGMAC_CMDCFG_ML 0x00008000 /* Set to activate mac loopback mode */ +#define BGMAC_CMDCFG_AE 0x00400000 +#define BGMAC_CMDCFG_CFE 0x00800000 +#define BGMAC_CMDCFG_NLC 0x01000000 +#define BGMAC_CMDCFG_RL 0x02000000 +#define BGMAC_CMDCFG_RED 0x04000000 +#define BGMAC_CMDCFG_PE 0x08000000 +#define BGMAC_CMDCFG_TPI 0x10000000 +#define BGMAC_CMDCFG_AT 0x20000000 +#define BGMAC_MACADDR_HIGH 0x80c /* High 4 octets of own mac address */ +#define BGMAC_MACADDR_LOW 0x810 /* Low 2 octets of own mac address */ +#define BGMAC_RXMAX_LENGTH 0x814 /* Max receive frame length with vlan tag */ +#define BGMAC_PAUSEQUANTA 0x818 +#define BGMAC_MAC_MODE 0x844 +#define BGMAC_OUTERTAG 0x848 +#define BGMAC_INNERTAG 0x84c +#define BGMAC_TXIPG 0x85c +#define BGMAC_PAUSE_CTL 0xb30 +#define BGMAC_TX_FLUSH 0xb34 +#define BGMAC_RX_STATUS 0xb38 +#define BGMAC_TX_STATUS 0xb3c + +#define BGMAC_PHY_CTL 0x00 +#define BGMAC_PHY_CTL_SPEED_MSB 0x0040 +#define BGMAC_PHY_CTL_DUPLEX 0x0100 /* duplex mode */ +#define BGMAC_PHY_CTL_RESTART 0x0200 /* restart autonegotiation */ +#define BGMAC_PHY_CTL_ANENAB 0x1000 /* enable autonegotiation */ +#define BGMAC_PHY_CTL_SPEED 0x2000 +#define BGMAC_PHY_CTL_LOOP 0x4000 /* loopback */ +#define BGMAC_PHY_CTL_RESET 0x8000 /* reset */ +/* Helpers */ +#define BGMAC_PHY_CTL_SPEED_10 0 +#define BGMAC_PHY_CTL_SPEED_100 BGMAC_PHY_CTL_SPEED +#define BGMAC_PHY_CTL_SPEED_1000 BGMAC_PHY_CTL_SPEED_MSB +#define BGMAC_PHY_ADV 0x04 +#define BGMAC_PHY_ADV_10HALF 0x0020 /* advertise 10MBits/s half duplex */ +#define BGMAC_PHY_ADV_10FULL 0x0040 /* advertise 10MBits/s full duplex */ +#define BGMAC_PHY_ADV_100HALF 0x0080 /* advertise 100MBits/s half duplex */ +#define BGMAC_PHY_ADV_100FULL 0x0100 /* advertise 100MBits/s full duplex */ +#define BGMAC_PHY_ADV2 0x09 +#define BGMAC_PHY_ADV2_1000HALF 0x0100 /* advertise 1000MBits/s half duplex */ +#define BGMAC_PHY_ADV2_1000FULL 0x0200 /* advertise 1000MBits/s full duplex */ + +/* BCMA GMAC core specific IO Control (BCMA_IOCTL) flags */ +#define BGMAC_BCMA_IOCTL_SW_CLKEN 0x00000004 /* PHY Clock Enable */ +#define BGMAC_BCMA_IOCTL_SW_RESET 0x00000008 /* PHY Reset */ + +/* BCMA GMAC core specific IO status (BCMA_IOST) flags */ +#define BGMAC_BCMA_IOST_ATTACHED 0x00000800 + +#define BGMAC_NUM_MIB_TX_REGS \ + (((BGMAC_TX_Q3_OCTETS_HIGH - BGMAC_TX_GOOD_OCTETS) / 4) + 1) +#define BGMAC_NUM_MIB_RX_REGS \ + (((BGMAC_RX_UNI_PKTS - BGMAC_RX_GOOD_OCTETS) / 4) + 1) + +#define BGMAC_DMA_TX_CTL 0x00 +#define BGMAC_DMA_TX_ENABLE 0x00000001 +#define BGMAC_DMA_TX_SUSPEND 0x00000002 +#define BGMAC_DMA_TX_LOOPBACK 0x00000004 +#define BGMAC_DMA_TX_FLUSH 0x00000010 +#define BGMAC_DMA_TX_PARITY_DISABLE 0x00000800 +#define BGMAC_DMA_TX_ADDREXT_MASK 0x00030000 +#define BGMAC_DMA_TX_ADDREXT_SHIFT 16 +#define BGMAC_DMA_TX_INDEX 0x04 +#define BGMAC_DMA_TX_RINGLO 0x08 +#define BGMAC_DMA_TX_RINGHI 0x0C +#define BGMAC_DMA_TX_STATUS 0x10 +#define BGMAC_DMA_TX_STATDPTR 0x00001FFF +#define BGMAC_DMA_TX_STAT 0xF0000000 +#define BGMAC_DMA_TX_STAT_DISABLED 0x00000000 +#define BGMAC_DMA_TX_STAT_ACTIVE 0x10000000 +#define BGMAC_DMA_TX_STAT_IDLEWAIT 0x20000000 +#define BGMAC_DMA_TX_STAT_STOPPED 0x30000000 +#define BGMAC_DMA_TX_STAT_SUSP 0x40000000 +#define BGMAC_DMA_TX_ERROR 0x14 +#define BGMAC_DMA_TX_ERRDPTR 0x0001FFFF +#define BGMAC_DMA_TX_ERR 0xF0000000 +#define BGMAC_DMA_TX_ERR_NOERR 0x00000000 +#define BGMAC_DMA_TX_ERR_PROT 0x10000000 +#define BGMAC_DMA_TX_ERR_UNDERRUN 0x20000000 +#define BGMAC_DMA_TX_ERR_TRANSFER 0x30000000 +#define BGMAC_DMA_TX_ERR_DESCREAD 0x40000000 +#define BGMAC_DMA_TX_ERR_CORE 0x50000000 +#define BGMAC_DMA_RX_CTL 0x20 +#define BGMAC_DMA_RX_ENABLE 0x00000001 +#define BGMAC_DMA_RX_FRAME_OFFSET_MASK 0x000000FE +#define BGMAC_DMA_RX_FRAME_OFFSET_SHIFT 1 +#define BGMAC_DMA_RX_DIRECT_FIFO 0x00000100 +#define BGMAC_DMA_RX_OVERFLOW_CONT 0x00000400 +#define BGMAC_DMA_RX_PARITY_DISABLE 0x00000800 +#define BGMAC_DMA_RX_ADDREXT_MASK 0x00030000 +#define BGMAC_DMA_RX_ADDREXT_SHIFT 16 +#define BGMAC_DMA_RX_INDEX 0x24 +#define BGMAC_DMA_RX_RINGLO 0x28 +#define BGMAC_DMA_RX_RINGHI 0x2C +#define BGMAC_DMA_RX_STATUS 0x30 +#define BGMAC_DMA_RX_STATDPTR 0x00001FFF +#define BGMAC_DMA_RX_STAT 0xF0000000 +#define BGMAC_DMA_RX_STAT_DISABLED 0x00000000 +#define BGMAC_DMA_RX_STAT_ACTIVE 0x10000000 +#define BGMAC_DMA_RX_STAT_IDLEWAIT 0x20000000 +#define BGMAC_DMA_RX_STAT_STOPPED 0x30000000 +#define BGMAC_DMA_RX_STAT_SUSP 0x40000000 +#define BGMAC_DMA_RX_ERROR 0x34 +#define BGMAC_DMA_RX_ERRDPTR 0x0001FFFF +#define BGMAC_DMA_RX_ERR 0xF0000000 +#define BGMAC_DMA_RX_ERR_NOERR 0x00000000 +#define BGMAC_DMA_RX_ERR_PROT 0x10000000 +#define BGMAC_DMA_RX_ERR_UNDERRUN 0x20000000 +#define BGMAC_DMA_RX_ERR_TRANSFER 0x30000000 +#define BGMAC_DMA_RX_ERR_DESCREAD 0x40000000 +#define BGMAC_DMA_RX_ERR_CORE 0x50000000 + +#define BGMAC_DESC_CTL0_EOT 0x10000000 /* End of ring */ +#define BGMAC_DESC_CTL0_IOC 0x20000000 /* IRQ on complete */ +#define BGMAC_DESC_CTL0_SOF 0x40000000 /* Start of frame */ +#define BGMAC_DESC_CTL0_EOF 0x80000000 /* End of frame */ +#define BGMAC_DESC_CTL1_LEN 0x00001FFF + +#define BGMAC_PHY_NOREGS 0x1E +#define BGMAC_PHY_MASK 0x1F + +#define BGMAC_MAX_TX_RINGS 4 +#define BGMAC_MAX_RX_RINGS 1 + +#define BGMAC_TX_RING_SLOTS 128 +#define BGMAC_RX_RING_SLOTS 512 - 1 /* Why -1? Well, Broadcom does that... */ + +#define BGMAC_RX_HEADER_LEN 28 /* Last 24 bytes are unused. Well... */ +#define BGMAC_RX_FRAME_OFFSET 30 /* There are 2 unused bytes between header and real data */ +#define BGMAC_RX_MAX_FRAME_SIZE 1536 /* Copied from b44/tg3 */ +#define BGMAC_RX_BUF_SIZE (BGMAC_RX_FRAME_OFFSET + BGMAC_RX_MAX_FRAME_SIZE) + +#define BGMAC_BFL_ENETROBO 0x0010 /* has ephy roboswitch spi */ +#define BGMAC_BFL_ENETADM 0x0080 /* has ADMtek switch */ +#define BGMAC_BFL_ENETVLAN 0x0100 /* can do vlan */ + +#define BGMAC_CHIPCTL_1_IF_TYPE_MASK 0x00000030 +#define BGMAC_CHIPCTL_1_IF_TYPE_RMII 0x00000000 +#define BGMAC_CHIPCTL_1_IF_TYPE_MI 0x00000010 +#define BGMAC_CHIPCTL_1_IF_TYPE_RGMII 0x00000020 +#define BGMAC_CHIPCTL_1_SW_TYPE_MASK 0x000000C0 +#define BGMAC_CHIPCTL_1_SW_TYPE_EPHY 0x00000000 +#define BGMAC_CHIPCTL_1_SW_TYPE_EPHYMII 0x00000040 +#define BGMAC_CHIPCTL_1_SW_TYPE_EPHYRMII 0x00000080 +#define BGMAC_CHIPCTL_1_SW_TYPE_RGMI 0x000000C0 +#define BGMAC_CHIPCTL_1_RXC_DLL_BYPASS 0x00010000 + +#define BGMAC_SPEED_10 0x0001 +#define BGMAC_SPEED_100 0x0002 +#define BGMAC_SPEED_1000 0x0004 + +#define BGMAC_WEIGHT 64 + +#define ETHER_MAX_LEN 1518 + +struct bgmac_slot_info { + struct sk_buff *skb; + dma_addr_t dma_addr; +}; + +struct bgmac_dma_desc { + __le32 ctl0; + __le32 ctl1; + __le32 addr_low; + __le32 addr_high; +} __packed; + +enum bgmac_dma_ring_type { + BGMAC_DMA_RING_TX, + BGMAC_DMA_RING_RX, +}; + +/** + * bgmac_dma_ring - contains info about DMA ring (either TX or RX one) + * @start: index of the first slot containing data + * @end: index of a slot that can *not* be read (yet) + * + * Be really aware of the specific @end meaning. It's an index of a slot *after* + * the one containing data that can be read. If @start equals @end the ring is + * empty. + */ +struct bgmac_dma_ring { + u16 num_slots; + u16 start; + u16 end; + + u16 mmio_base; + struct bgmac_dma_desc *cpu_base; + dma_addr_t dma_base; + + struct bgmac_slot_info slots[BGMAC_RX_RING_SLOTS]; +}; + +struct bgmac_rx_header { + __le16 len; + __le16 flags; + __le16 pad[12]; +}; + +struct bgmac { + struct bcma_device *core; + struct bcma_device *cmn; /* Reference to CMN core for BCM4706 */ + struct net_device *net_dev; + struct napi_struct napi; + + /* DMA */ + struct bgmac_dma_ring tx_ring[BGMAC_MAX_TX_RINGS]; + struct bgmac_dma_ring rx_ring[BGMAC_MAX_RX_RINGS]; + + /* Stats */ + bool stats_grabbed; + u32 mib_tx_regs[BGMAC_NUM_MIB_TX_REGS]; + u32 mib_rx_regs[BGMAC_NUM_MIB_RX_REGS]; + + /* Int */ + u32 int_mask; + u32 int_status; + + /* Speed-related */ + int speed; + bool autoneg; + bool full_duplex; + + u8 phyaddr; + bool has_robosw; + + bool loopback; +}; + +static inline u32 bgmac_read(struct bgmac *bgmac, u16 offset) +{ + return bcma_read32(bgmac->core, offset); +} + +static inline void bgmac_write(struct bgmac *bgmac, u16 offset, u32 value) +{ + bcma_write32(bgmac->core, offset, value); +} + +static inline void bgmac_maskset(struct bgmac *bgmac, u16 offset, u32 mask, + u32 set) +{ + bgmac_write(bgmac, offset, (bgmac_read(bgmac, offset) & mask) | set); +} + +static inline void bgmac_mask(struct bgmac *bgmac, u16 offset, u32 mask) +{ + bgmac_maskset(bgmac, offset, mask, 0); +} + +static inline void bgmac_set(struct bgmac *bgmac, u16 offset, u32 set) +{ + bgmac_maskset(bgmac, offset, ~0, set); +} + +u16 bgmac_phy_read(struct bgmac *bgmac, u8 phyaddr, u8 reg); +void bgmac_phy_write(struct bgmac *bgmac, u8 phyaddr, u8 reg, u16 value); + +#endif /* _BGMAC_H */ |