diff options
Diffstat (limited to 'drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c')
| -rw-r--r-- | drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c | 142 |
1 files changed, 96 insertions, 46 deletions
diff --git a/drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c b/drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c index 348479bbfa3a..b6b036a143ae 100644 --- a/drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c +++ b/drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c @@ -199,9 +199,9 @@ bfa_ioc_ct_notify_fail(struct bfa_ioc *ioc) * Host to LPU mailbox message addresses */ static const struct { - u32 hfn_mbox; - u32 lpu_mbox; - u32 hfn_pgn; + u32 hfn_mbox; + u32 lpu_mbox; + u32 hfn_pgn; } ct_fnreg[] = { { HOSTFN0_LPU_MBOX0_0, LPU_HOSTFN0_MBOX0_0, HOST_PAGE_NUM_FN0 }, { HOSTFN1_LPU_MBOX0_8, LPU_HOSTFN1_MBOX0_8, HOST_PAGE_NUM_FN1 }, @@ -803,17 +803,72 @@ bfa_ioc_ct2_mac_reset(void __iomem *rb) } #define CT2_NFC_MAX_DELAY 1000 +#define CT2_NFC_VER_VALID 0x143 +#define BFA_IOC_PLL_POLL 1000000 + +static bool +bfa_ioc_ct2_nfc_halted(void __iomem *rb) +{ + volatile u32 r32; + + r32 = readl(rb + CT2_NFC_CSR_SET_REG); + if (r32 & __NFC_CONTROLLER_HALTED) + return true; + + return false; +} + +static void +bfa_ioc_ct2_nfc_resume(void __iomem *rb) +{ + volatile u32 r32; + int i; + + writel(__HALT_NFC_CONTROLLER, rb + CT2_NFC_CSR_CLR_REG); + for (i = 0; i < CT2_NFC_MAX_DELAY; i++) { + r32 = readl(rb + CT2_NFC_CSR_SET_REG); + if (!(r32 & __NFC_CONTROLLER_HALTED)) + return; + udelay(1000); + } + BUG_ON(1); +} + static enum bfa_status bfa_ioc_ct2_pll_init(void __iomem *rb, enum bfi_asic_mode asic_mode) { volatile u32 wgn, r32; - int i; + u32 nfc_ver, i; - /* - * Initialize PLL if not already done by NFC - */ wgn = readl(rb + CT2_WGN_STATUS); - if (!(wgn & __GLBL_PF_VF_CFG_RDY)) { + + nfc_ver = readl(rb + CT2_RSC_GPR15_REG); + + if ((wgn == (__A2T_AHB_LOAD | __WGN_READY)) && + (nfc_ver >= CT2_NFC_VER_VALID)) { + if (bfa_ioc_ct2_nfc_halted(rb)) + bfa_ioc_ct2_nfc_resume(rb); + writel(__RESET_AND_START_SCLK_LCLK_PLLS, + rb + CT2_CSI_FW_CTL_SET_REG); + + for (i = 0; i < BFA_IOC_PLL_POLL; i++) { + r32 = readl(rb + CT2_APP_PLL_LCLK_CTL_REG); + if (r32 & __RESET_AND_START_SCLK_LCLK_PLLS) + break; + } + BUG_ON(!(r32 & __RESET_AND_START_SCLK_LCLK_PLLS)); + + for (i = 0; i < BFA_IOC_PLL_POLL; i++) { + r32 = readl(rb + CT2_APP_PLL_LCLK_CTL_REG); + if (!(r32 & __RESET_AND_START_SCLK_LCLK_PLLS)) + break; + } + BUG_ON(r32 & __RESET_AND_START_SCLK_LCLK_PLLS); + udelay(1000); + + r32 = readl(rb + CT2_CSI_FW_CTL_REG); + BUG_ON(r32 & __RESET_AND_START_SCLK_LCLK_PLLS); + } else { writel(__HALT_NFC_CONTROLLER, (rb + CT2_NFC_CSR_SET_REG)); for (i = 0; i < CT2_NFC_MAX_DELAY; i++) { r32 = readl(rb + CT2_NFC_CSR_SET_REG); @@ -821,53 +876,48 @@ bfa_ioc_ct2_pll_init(void __iomem *rb, enum bfi_asic_mode asic_mode) break; udelay(1000); } + + bfa_ioc_ct2_mac_reset(rb); + bfa_ioc_ct2_sclk_init(rb); + bfa_ioc_ct2_lclk_init(rb); + + /* release soft reset on s_clk & l_clk */ + r32 = readl((rb + CT2_APP_PLL_SCLK_CTL_REG)); + writel(r32 & ~__APP_PLL_SCLK_LOGIC_SOFT_RESET, + rb + CT2_APP_PLL_SCLK_CTL_REG); + r32 = readl((rb + CT2_APP_PLL_LCLK_CTL_REG)); + writel(r32 & ~__APP_PLL_LCLK_LOGIC_SOFT_RESET, + rb + CT2_APP_PLL_LCLK_CTL_REG); + } + + /* Announce flash device presence, if flash was corrupted. */ + if (wgn == (__WGN_READY | __GLBL_PF_VF_CFG_RDY)) { + r32 = readl((rb + PSS_GPIO_OUT_REG)); + writel(r32 & ~1, rb + PSS_GPIO_OUT_REG); + r32 = readl((rb + PSS_GPIO_OE_REG)); + writel(r32 | 1, rb + PSS_GPIO_OE_REG); } /* * Mask the interrupts and clear any * pending interrupts left by BIOS/EFI */ - writel(1, (rb + CT2_LPU0_HOSTFN_MBOX0_MSK)); writel(1, (rb + CT2_LPU1_HOSTFN_MBOX0_MSK)); - r32 = readl((rb + CT2_LPU0_HOSTFN_CMD_STAT)); - if (r32 == 1) { - writel(1, (rb + CT2_LPU0_HOSTFN_CMD_STAT)); - readl((rb + CT2_LPU0_HOSTFN_CMD_STAT)); - } - r32 = readl((rb + CT2_LPU1_HOSTFN_CMD_STAT)); - if (r32 == 1) { - writel(1, (rb + CT2_LPU1_HOSTFN_CMD_STAT)); - readl((rb + CT2_LPU1_HOSTFN_CMD_STAT)); - } - - bfa_ioc_ct2_mac_reset(rb); - bfa_ioc_ct2_sclk_init(rb); - bfa_ioc_ct2_lclk_init(rb); - - /* - * release soft reset on s_clk & l_clk - */ - r32 = readl((rb + CT2_APP_PLL_SCLK_CTL_REG)); - writel((r32 & ~__APP_PLL_SCLK_LOGIC_SOFT_RESET), - (rb + CT2_APP_PLL_SCLK_CTL_REG)); - - /* - * release soft reset on s_clk & l_clk - */ - r32 = readl((rb + CT2_APP_PLL_LCLK_CTL_REG)); - writel(r32 & ~__APP_PLL_LCLK_LOGIC_SOFT_RESET, - (rb + CT2_APP_PLL_LCLK_CTL_REG)); - - /* - * Announce flash device presence, if flash was corrupted. - */ - if (wgn == (__WGN_READY | __GLBL_PF_VF_CFG_RDY)) { - r32 = readl((rb + PSS_GPIO_OUT_REG)); - writel((r32 & ~1), (rb + PSS_GPIO_OUT_REG)); - r32 = readl((rb + PSS_GPIO_OE_REG)); - writel((r32 | 1), (rb + PSS_GPIO_OE_REG)); + /* For first time initialization, no need to clear interrupts */ + r32 = readl(rb + HOST_SEM5_REG); + if (r32 & 0x1) { + r32 = readl((rb + CT2_LPU0_HOSTFN_CMD_STAT)); + if (r32 == 1) { + writel(1, (rb + CT2_LPU0_HOSTFN_CMD_STAT)); + readl((rb + CT2_LPU0_HOSTFN_CMD_STAT)); + } + r32 = readl((rb + CT2_LPU1_HOSTFN_CMD_STAT)); + if (r32 == 1) { + writel(1, (rb + CT2_LPU1_HOSTFN_CMD_STAT)); + readl((rb + CT2_LPU1_HOSTFN_CMD_STAT)); + } } bfa_ioc_ct2_mem_init(rb); |