diff options
Diffstat (limited to 'drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c')
-rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 155 |
1 files changed, 153 insertions, 2 deletions
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index 5b8f80fbe80e..73ac153795b6 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -137,6 +137,10 @@ struct filter_entry { #define FW5_FNAME "cxgb4/t5fw.bin" #define FW4_CFNAME "cxgb4/t4-config.txt" #define FW5_CFNAME "cxgb4/t5-config.txt" +#define PHY_AQ1202_FIRMWARE "cxgb4/aq1202_fw.cld" +#define PHY_BCM84834_FIRMWARE "cxgb4/bcm8483.bin" +#define PHY_AQ1202_DEVICEID 0x4409 +#define PHY_BCM84834_DEVICEID 0x4486 MODULE_DESCRIPTION(DRV_DESC); MODULE_AUTHOR("Chelsio Communications"); @@ -318,8 +322,9 @@ static void dcb_tx_queue_prio_enable(struct net_device *dev, int enable) * level") we need to issue the Set Parameters Commannd * without sleeping (timeout < 0). */ - err = t4_set_params_nosleep(adap, adap->mbox, adap->fn, 0, 1, - &name, &value); + err = t4_set_params_timeout(adap, adap->mbox, adap->fn, 0, 1, + &name, &value, + -FW_CMD_MAX_TIMEOUT); if (err) dev_err(adap->pdev_dev, @@ -3222,6 +3227,142 @@ static int adap_init0_tweaks(struct adapter *adapter) return 0; } +/* 10Gb/s-BT PHY Support. chip-external 10Gb/s-BT PHYs are complex chips + * unto themselves and they contain their own firmware to perform their + * tasks ... + */ +static int phy_aq1202_version(const u8 *phy_fw_data, + size_t phy_fw_size) +{ + int offset; + + /* At offset 0x8 you're looking for the primary image's + * starting offset which is 3 Bytes wide + * + * At offset 0xa of the primary image, you look for the offset + * of the DRAM segment which is 3 Bytes wide. + * + * The FW version is at offset 0x27e of the DRAM and is 2 Bytes + * wide + */ + #define be16(__p) (((__p)[0] << 8) | (__p)[1]) + #define le16(__p) ((__p)[0] | ((__p)[1] << 8)) + #define le24(__p) (le16(__p) | ((__p)[2] << 16)) + + offset = le24(phy_fw_data + 0x8) << 12; + offset = le24(phy_fw_data + offset + 0xa); + return be16(phy_fw_data + offset + 0x27e); + + #undef be16 + #undef le16 + #undef le24 +} + +static struct info_10gbt_phy_fw { + unsigned int phy_fw_id; /* PCI Device ID */ + char *phy_fw_file; /* /lib/firmware/ PHY Firmware file */ + int (*phy_fw_version)(const u8 *phy_fw_data, size_t phy_fw_size); + int phy_flash; /* Has FLASH for PHY Firmware */ +} phy_info_array[] = { + { + PHY_AQ1202_DEVICEID, + PHY_AQ1202_FIRMWARE, + phy_aq1202_version, + 1, + }, + { + PHY_BCM84834_DEVICEID, + PHY_BCM84834_FIRMWARE, + NULL, + 0, + }, + { 0, NULL, NULL }, +}; + +static struct info_10gbt_phy_fw *find_phy_info(int devid) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(phy_info_array); i++) { + if (phy_info_array[i].phy_fw_id == devid) + return &phy_info_array[i]; + } + return NULL; +} + +/* Handle updating of chip-external 10Gb/s-BT PHY firmware. This needs to + * happen after the FW_RESET_CMD but before the FW_INITIALIZE_CMD. On error + * we return a negative error number. If we transfer new firmware we return 1 + * (from t4_load_phy_fw()). If we don't do anything we return 0. + */ +static int adap_init0_phy(struct adapter *adap) +{ + const struct firmware *phyf; + int ret; + struct info_10gbt_phy_fw *phy_info; + + /* Use the device ID to determine which PHY file to flash. + */ + phy_info = find_phy_info(adap->pdev->device); + if (!phy_info) { + dev_warn(adap->pdev_dev, + "No PHY Firmware file found for this PHY\n"); + return -EOPNOTSUPP; + } + + /* If we have a T4 PHY firmware file under /lib/firmware/cxgb4/, then + * use that. The adapter firmware provides us with a memory buffer + * where we can load a PHY firmware file from the host if we want to + * override the PHY firmware File in flash. + */ + ret = request_firmware_direct(&phyf, phy_info->phy_fw_file, + adap->pdev_dev); + if (ret < 0) { + /* For adapters without FLASH attached to PHY for their + * firmware, it's obviously a fatal error if we can't get the + * firmware to the adapter. For adapters with PHY firmware + * FLASH storage, it's worth a warning if we can't find the + * PHY Firmware but we'll neuter the error ... + */ + dev_err(adap->pdev_dev, "unable to find PHY Firmware image " + "/lib/firmware/%s, error %d\n", + phy_info->phy_fw_file, -ret); + if (phy_info->phy_flash) { + int cur_phy_fw_ver = 0; + + t4_phy_fw_ver(adap, &cur_phy_fw_ver); + dev_warn(adap->pdev_dev, "continuing with, on-adapter " + "FLASH copy, version %#x\n", cur_phy_fw_ver); + ret = 0; + } + + return ret; + } + + /* Load PHY Firmware onto adapter. + */ + ret = t4_load_phy_fw(adap, MEMWIN_NIC, &adap->win0_lock, + phy_info->phy_fw_version, + (u8 *)phyf->data, phyf->size); + if (ret < 0) + dev_err(adap->pdev_dev, "PHY Firmware transfer error %d\n", + -ret); + else if (ret > 0) { + int new_phy_fw_ver = 0; + + if (phy_info->phy_fw_version) + new_phy_fw_ver = phy_info->phy_fw_version(phyf->data, + phyf->size); + dev_info(adap->pdev_dev, "Successfully transferred PHY " + "Firmware /lib/firmware/%s, version %#x\n", + phy_info->phy_fw_file, new_phy_fw_ver); + } + + release_firmware(phyf); + + return ret; +} + /* * Attempt to initialize the adapter via a Firmware Configuration File. */ @@ -3246,6 +3387,16 @@ static int adap_init0_config(struct adapter *adapter, int reset) goto bye; } + /* If this is a 10Gb/s-BT adapter make sure the chip-external + * 10Gb/s-BT PHYs have up-to-date firmware. Note that this step needs + * to be performed after any global adapter RESET above since some + * PHYs only have local RAM copies of the PHY firmware. + */ + if (is_10gbt_device(adapter->pdev->device)) { + ret = adap_init0_phy(adapter); + if (ret < 0) + goto bye; + } /* * If we have a T4 configuration file under /lib/firmware/cxgb4/, * then use that. Otherwise, use the configuration file stored |