diff options
Diffstat (limited to 'drivers/net/ethernet/chelsio/cxgb4/t4_hw.c')
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 123 |
1 files changed, 104 insertions, 19 deletions
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index a853133d8db8..1fff1495fe31 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -168,6 +168,34 @@ void t4_hw_pci_read_cfg4(struct adapter *adap, int reg, u32 *val) } /* + * t4_report_fw_error - report firmware error + * @adap: the adapter + * + * The adapter firmware can indicate error conditions to the host. + * If the firmware has indicated an error, print out the reason for + * the firmware error. + */ +static void t4_report_fw_error(struct adapter *adap) +{ + static const char *const reason[] = { + "Crash", /* PCIE_FW_EVAL_CRASH */ + "During Device Preparation", /* PCIE_FW_EVAL_PREP */ + "During Device Configuration", /* PCIE_FW_EVAL_CONF */ + "During Device Initialization", /* PCIE_FW_EVAL_INIT */ + "Unexpected Event", /* PCIE_FW_EVAL_UNEXPECTEDEVENT */ + "Insufficient Airflow", /* PCIE_FW_EVAL_OVERHEAT */ + "Device Shutdown", /* PCIE_FW_EVAL_DEVICESHUTDOWN */ + "Reserved", /* reserved */ + }; + u32 pcie_fw; + + pcie_fw = t4_read_reg(adap, MA_PCIE_FW); + if (pcie_fw & FW_PCIE_FW_ERR) + dev_err(adap->pdev_dev, "Firmware reports adapter error: %s\n", + reason[FW_PCIE_FW_EVAL_GET(pcie_fw)]); +} + +/* * Get the reply to a mailbox command and store it in @rpl in big-endian order. */ static void get_mbox_rpl(struct adapter *adap, __be64 *rpl, int nflit, @@ -300,6 +328,7 @@ int t4_wr_mbox_meat(struct adapter *adap, int mbox, const void *cmd, int size, dump_mbox(adap, mbox, data_reg); dev_err(adap->pdev_dev, "command %#x in mailbox %d timed out\n", *(const u8 *)cmd, mbox); + t4_report_fw_error(adap); return -ETIMEDOUT; } @@ -566,6 +595,7 @@ int t4_memory_rw(struct adapter *adap, int win, int mtype, u32 addr, #define VPD_BASE 0x400 #define VPD_BASE_OLD 0 #define VPD_LEN 1024 +#define CHELSIO_VPD_UNIQUE_ID 0x82 /** * t4_seeprom_wp - enable/disable EEPROM write protection @@ -603,7 +633,14 @@ int get_vpd_params(struct adapter *adapter, struct vpd_params *p) ret = pci_read_vpd(adapter->pdev, VPD_BASE, sizeof(u32), vpd); if (ret < 0) goto out; - addr = *vpd == 0x82 ? VPD_BASE : VPD_BASE_OLD; + + /* The VPD shall have a unique identifier specified by the PCI SIG. + * For chelsio adapters, the identifier is 0x82. The first byte of a VPD + * shall be CHELSIO_VPD_UNIQUE_ID (0x82). The VPD programming software + * is expected to automatically put this entry at the + * beginning of the VPD. + */ + addr = *vpd == CHELSIO_VPD_UNIQUE_ID ? VPD_BASE : VPD_BASE_OLD; ret = pci_read_vpd(adapter->pdev, addr, VPD_LEN, vpd); if (ret < 0) @@ -667,6 +704,7 @@ int get_vpd_params(struct adapter *adapter, struct vpd_params *p) i = pci_vpd_info_field_size(vpd + sn - PCI_VPD_INFO_FLD_HDR_SIZE); memcpy(p->sn, vpd + sn, min(i, SERNUM_LEN)); strim(p->sn); + i = pci_vpd_info_field_size(vpd + pn - PCI_VPD_INFO_FLD_HDR_SIZE); memcpy(p->pn, vpd + pn, min(i, PN_LEN)); strim(p->pn); @@ -1061,6 +1099,9 @@ static int t4_flash_erase_sectors(struct adapter *adapter, int start, int end) { int ret = 0; + if (end >= adapter->params.sf_nsec) + return -EINVAL; + while (start <= end) { if ((ret = sf1_write(adapter, 1, 0, 1, SF_WR_ENABLE)) != 0 || (ret = sf1_write(adapter, 4, 0, 1, @@ -1394,15 +1435,18 @@ static void pcie_intr_handler(struct adapter *adapter) int fat; - fat = t4_handle_intr_status(adapter, - PCIE_CORE_UTL_SYSTEM_BUS_AGENT_STATUS, - sysbus_intr_info) + - t4_handle_intr_status(adapter, - PCIE_CORE_UTL_PCI_EXPRESS_PORT_STATUS, - pcie_port_intr_info) + - t4_handle_intr_status(adapter, PCIE_INT_CAUSE, - is_t4(adapter->params.chip) ? - pcie_intr_info : t5_pcie_intr_info); + if (is_t4(adapter->params.chip)) + fat = t4_handle_intr_status(adapter, + PCIE_CORE_UTL_SYSTEM_BUS_AGENT_STATUS, + sysbus_intr_info) + + t4_handle_intr_status(adapter, + PCIE_CORE_UTL_PCI_EXPRESS_PORT_STATUS, + pcie_port_intr_info) + + t4_handle_intr_status(adapter, PCIE_INT_CAUSE, + pcie_intr_info); + else + fat = t4_handle_intr_status(adapter, PCIE_INT_CAUSE, + t5_pcie_intr_info); if (fat) t4_fatal_err(adapter); @@ -1521,6 +1565,9 @@ static void cim_intr_handler(struct adapter *adapter) int fat; + if (t4_read_reg(adapter, MA_PCIE_FW) & FW_PCIE_FW_ERR) + t4_report_fw_error(adapter); + fat = t4_handle_intr_status(adapter, CIM_HOST_INT_CAUSE, cim_intr_info) + t4_handle_intr_status(adapter, CIM_HOST_UPACC_INT_CAUSE, @@ -1768,10 +1815,16 @@ static void ma_intr_handler(struct adapter *adap) { u32 v, status = t4_read_reg(adap, MA_INT_CAUSE); - if (status & MEM_PERR_INT_CAUSE) + if (status & MEM_PERR_INT_CAUSE) { dev_alert(adap->pdev_dev, "MA parity error, parity status %#x\n", t4_read_reg(adap, MA_PARITY_ERROR_STATUS)); + if (is_t5(adap->params.chip)) + dev_alert(adap->pdev_dev, + "MA parity error, parity status %#x\n", + t4_read_reg(adap, + MA_PARITY_ERROR_STATUS2)); + } if (status & MEM_WRAP_INT_CAUSE) { v = t4_read_reg(adap, MA_INT_WRAP_STATUS); dev_alert(adap->pdev_dev, "MA address wrap-around error by " @@ -2733,12 +2786,16 @@ retry: /* * Issue the HELLO command to the firmware. If it's not successful * but indicates that we got a "busy" or "timeout" condition, retry - * the HELLO until we exhaust our retry limit. + * the HELLO until we exhaust our retry limit. If we do exceed our + * retry limit, check to see if the firmware left us any error + * information and report that if so. */ ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); if (ret < 0) { if ((ret == -EBUSY || ret == -ETIMEDOUT) && retries-- > 0) goto retry; + if (t4_read_reg(adap, MA_PCIE_FW) & FW_PCIE_FW_ERR) + t4_report_fw_error(adap); return ret; } @@ -3742,6 +3799,7 @@ int t4_handle_fw_rpl(struct adapter *adap, const __be64 *rpl) lc->link_ok = link_ok; lc->speed = speed; lc->fc = fc; + lc->supported = be16_to_cpu(p->u.info.pcap); t4_os_link_changed(adap, port, link_ok); } if (mod != pi->mod_type) { @@ -3787,16 +3845,35 @@ static void init_link_config(struct link_config *lc, unsigned int caps) } } -int t4_wait_dev_ready(struct adapter *adap) +#define CIM_PF_NOACCESS 0xeeeeeeee + +int t4_wait_dev_ready(void __iomem *regs) { - if (t4_read_reg(adap, PL_WHOAMI) != 0xffffffff) + u32 whoami; + + whoami = readl(regs + PL_WHOAMI); + if (whoami != 0xffffffff && whoami != CIM_PF_NOACCESS) return 0; + msleep(500); - return t4_read_reg(adap, PL_WHOAMI) != 0xffffffff ? 0 : -EIO; + whoami = readl(regs + PL_WHOAMI); + return (whoami != 0xffffffff && whoami != CIM_PF_NOACCESS ? 0 : -EIO); } +struct flash_desc { + u32 vendor_and_model_id; + u32 size_mb; +}; + static int get_flash_params(struct adapter *adap) { + /* Table for non-Numonix supported flash parts. Numonix parts are left + * to the preexisting code. All flash parts have 64KB sectors. + */ + static struct flash_desc supported_flash[] = { + { 0x150201, 4 << 20 }, /* Spansion 4MB S25FL032P */ + }; + int ret; u32 info; @@ -3807,6 +3884,14 @@ static int get_flash_params(struct adapter *adap) if (ret) return ret; + for (ret = 0; ret < ARRAY_SIZE(supported_flash); ++ret) + if (supported_flash[ret].vendor_and_model_id == info) { + adap->params.sf_size = supported_flash[ret].size_mb; + adap->params.sf_nsec = + adap->params.sf_size / SF_SEC_SIZE; + return 0; + } + if ((info & 0xff) != 0x20) /* not a Numonix flash */ return -EINVAL; info >>= 16; /* log2 of size */ @@ -3819,6 +3904,10 @@ static int get_flash_params(struct adapter *adap) adap->params.sf_size = 1 << info; adap->params.sf_fw_start = t4_read_reg(adap, CIM_BOOT_CFG) & BOOTADDR_MASK; + + if (adap->params.sf_size < FLASH_MIN_SIZE) + dev_warn(adap->pdev_dev, "WARNING!!! FLASH size %#x < %#x!!!\n", + adap->params.sf_size, FLASH_MIN_SIZE); return 0; } @@ -3837,10 +3926,6 @@ int t4_prep_adapter(struct adapter *adapter) uint16_t device_id; u32 pl_rev; - ret = t4_wait_dev_ready(adapter); - if (ret < 0) - return ret; - get_pci_mode(adapter, &adapter->params.pci); pl_rev = G_REV(t4_read_reg(adapter, PL_REV)); |