diff options
Diffstat (limited to 'drivers/net/ethernet/intel/e1000')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000/e1000_ethtool.c | 12 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000/e1000_hw.h | 5 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000/e1000_main.c | 61 |
3 files changed, 38 insertions, 40 deletions
diff --git a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c index 2b223ac99c42..3103f0b6bf5e 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c +++ b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c @@ -515,14 +515,14 @@ static void e1000_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo) { struct e1000_adapter *adapter = netdev_priv(netdev); - char firmware_version[32]; - strncpy(drvinfo->driver, e1000_driver_name, 32); - strncpy(drvinfo->version, e1000_driver_version, 32); + strlcpy(drvinfo->driver, e1000_driver_name, + sizeof(drvinfo->driver)); + strlcpy(drvinfo->version, e1000_driver_version, + sizeof(drvinfo->version)); - sprintf(firmware_version, "N/A"); - strncpy(drvinfo->fw_version, firmware_version, 32); - strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32); + strlcpy(drvinfo->bus_info, pci_name(adapter->pdev), + sizeof(drvinfo->bus_info)); drvinfo->regdump_len = e1000_get_regs_len(netdev); drvinfo->eedump_len = e1000_get_eeprom_len(netdev); } diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.h b/drivers/net/ethernet/intel/e1000/e1000_hw.h index 5c9a8403668b..f6c4d7e2560c 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_hw.h +++ b/drivers/net/ethernet/intel/e1000/e1000_hw.h @@ -448,7 +448,6 @@ void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value); #define E1000_DEV_ID_INTEL_CE4100_GBE 0x2E6E #define NODE_ADDRESS_SIZE 6 -#define ETH_LENGTH_OF_ADDRESS 6 /* MAC decode size is 128K - This is the size of BAR0 */ #define MAC_DECODE_SIZE (128 * 1024) @@ -813,8 +812,7 @@ struct e1000_ffvt_entry { #define E1000_FLA 0x0001C /* Flash Access - RW */ #define E1000_MDIC 0x00020 /* MDI Control - RW */ -extern void __iomem *ce4100_gbe_mdio_base_virt; -#define INTEL_CE_GBE_MDIO_RCOMP_BASE (ce4100_gbe_mdio_base_virt) +#define INTEL_CE_GBE_MDIO_RCOMP_BASE (hw->ce4100_gbe_mdio_base_virt) #define E1000_MDIO_STS (INTEL_CE_GBE_MDIO_RCOMP_BASE + 0) #define E1000_MDIO_CMD (INTEL_CE_GBE_MDIO_RCOMP_BASE + 4) #define E1000_MDIO_DRV (INTEL_CE_GBE_MDIO_RCOMP_BASE + 8) @@ -1344,6 +1342,7 @@ struct e1000_hw_stats { struct e1000_hw { u8 __iomem *hw_addr; u8 __iomem *flash_address; + void __iomem *ce4100_gbe_mdio_base_virt; e1000_mac_type mac_type; e1000_phy_type phy_type; u32 phy_init_script; diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c index cf480b554622..669ca3800c01 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -33,11 +33,6 @@ #include <linux/bitops.h> #include <linux/if_vlan.h> -/* Intel Media SOC GbE MDIO physical base address */ -static unsigned long ce4100_gbe_mdio_base_phy; -/* Intel Media SOC GbE MDIO virtual base address */ -void __iomem *ce4100_gbe_mdio_base_virt; - char e1000_driver_name[] = "e1000"; static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver"; #define DRV_VERSION "7.3.21-k8-NAPI" @@ -167,9 +162,10 @@ static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter, struct sk_buff *skb); static bool e1000_vlan_used(struct e1000_adapter *adapter); -static void e1000_vlan_mode(struct net_device *netdev, u32 features); -static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid); -static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid); +static void e1000_vlan_mode(struct net_device *netdev, + netdev_features_t features); +static int e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid); +static int e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid); static void e1000_restore_vlan(struct e1000_adapter *adapter); #ifdef CONFIG_PM @@ -806,7 +802,8 @@ static int e1000_is_need_ioport(struct pci_dev *pdev) } } -static u32 e1000_fix_features(struct net_device *netdev, u32 features) +static netdev_features_t e1000_fix_features(struct net_device *netdev, + netdev_features_t features) { /* * Since there is no support for separate rx/tx vlan accel @@ -820,10 +817,11 @@ static u32 e1000_fix_features(struct net_device *netdev, u32 features) return features; } -static int e1000_set_features(struct net_device *netdev, u32 features) +static int e1000_set_features(struct net_device *netdev, + netdev_features_t features) { struct e1000_adapter *adapter = netdev_priv(netdev); - u32 changed = features ^ netdev->features; + netdev_features_t changed = features ^ netdev->features; if (changed & NETIF_F_HW_VLAN_RX) e1000_vlan_mode(netdev, features); @@ -1051,11 +1049,11 @@ static int __devinit e1000_probe(struct pci_dev *pdev, err = -EIO; if (hw->mac_type == e1000_ce4100) { - ce4100_gbe_mdio_base_phy = pci_resource_start(pdev, BAR_1); - ce4100_gbe_mdio_base_virt = ioremap(ce4100_gbe_mdio_base_phy, + hw->ce4100_gbe_mdio_base_virt = + ioremap(pci_resource_start(pdev, BAR_1), pci_resource_len(pdev, BAR_1)); - if (!ce4100_gbe_mdio_base_virt) + if (!hw->ce4100_gbe_mdio_base_virt) goto err_mdio_ioremap; } @@ -1182,7 +1180,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, if (global_quad_port_a != 0) adapter->eeprom_wol = 0; else - adapter->quad_port_a = 1; + adapter->quad_port_a = true; /* Reset for multiple quad port adapters */ if (++global_quad_port_a == 4) global_quad_port_a = 0; @@ -1246,7 +1244,7 @@ err_eeprom: err_dma: err_sw_init: err_mdio_ioremap: - iounmap(ce4100_gbe_mdio_base_virt); + iounmap(hw->ce4100_gbe_mdio_base_virt); iounmap(hw->hw_addr); err_ioremap: free_netdev(netdev); @@ -1283,6 +1281,8 @@ static void __devexit e1000_remove(struct pci_dev *pdev) kfree(adapter->tx_ring); kfree(adapter->rx_ring); + if (hw->mac_type == e1000_ce4100) + iounmap(hw->ce4100_gbe_mdio_base_virt); iounmap(hw->hw_addr); if (hw->flash_address) iounmap(hw->flash_address); @@ -1676,7 +1676,7 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) * need this to apply a workaround later in the send path. */ if (hw->mac_type == e1000_82544 && hw->bus_type == e1000_bus_type_pcix) - adapter->pcix_82544 = 1; + adapter->pcix_82544 = true; ew32(TCTL, tctl); @@ -1999,7 +1999,7 @@ static void e1000_clean_tx_ring(struct e1000_adapter *adapter, tx_ring->next_to_use = 0; tx_ring->next_to_clean = 0; - tx_ring->last_tx_tso = 0; + tx_ring->last_tx_tso = false; writel(0, hw->hw_addr + tx_ring->tdh); writel(0, hw->hw_addr + tx_ring->tdt); @@ -2848,7 +2848,7 @@ static int e1000_tx_map(struct e1000_adapter *adapter, * DMA'd to the controller */ if (!skb->data_len && tx_ring->last_tx_tso && !skb_is_gso(skb)) { - tx_ring->last_tx_tso = 0; + tx_ring->last_tx_tso = false; size -= 4; } @@ -3216,7 +3216,7 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, if (likely(tso)) { if (likely(hw->mac_type != e1000_82544)) - tx_ring->last_tx_tso = 1; + tx_ring->last_tx_tso = true; tx_flags |= E1000_TX_FLAGS_TSO; } else if (likely(e1000_tx_csum(adapter, tx_ring, skb))) tx_flags |= E1000_TX_FLAGS_CSUM; @@ -4577,7 +4577,8 @@ static void e1000_vlan_filter_on_off(struct e1000_adapter *adapter, e1000_irq_enable(adapter); } -static void e1000_vlan_mode(struct net_device *netdev, u32 features) +static void e1000_vlan_mode(struct net_device *netdev, + netdev_features_t features) { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; @@ -4600,7 +4601,7 @@ static void e1000_vlan_mode(struct net_device *netdev, u32 features) e1000_irq_enable(adapter); } -static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid) +static int e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid) { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; @@ -4609,7 +4610,7 @@ static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid) if ((hw->mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) && (vid == adapter->mng_vlan_id)) - return; + return 0; if (!e1000_vlan_used(adapter)) e1000_vlan_filter_on_off(adapter, true); @@ -4621,9 +4622,11 @@ static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid) e1000_write_vfta(hw, index, vfta); set_bit(vid, adapter->active_vlans); + + return 0; } -static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) +static int e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; @@ -4644,6 +4647,8 @@ static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) if (!e1000_vlan_used(adapter)) e1000_vlan_filter_on_off(adapter, false); + + return 0; } static void e1000_restore_vlan(struct e1000_adapter *adapter) @@ -4716,8 +4721,6 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake) netif_device_detach(netdev); - mutex_lock(&adapter->mutex); - if (netif_running(netdev)) { WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags)); e1000_down(adapter); @@ -4725,10 +4728,8 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake) #ifdef CONFIG_PM retval = pci_save_state(pdev); - if (retval) { - mutex_unlock(&adapter->mutex); + if (retval) return retval; - } #endif status = er32(STATUS); @@ -4783,8 +4784,6 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake) if (netif_running(netdev)) e1000_free_irq(adapter); - mutex_unlock(&adapter->mutex); - pci_disable_device(pdev); return 0; |