diff options
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/ethtool.c')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/ethtool.c | 252 |
1 files changed, 215 insertions, 37 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index fd4772a2691c..2c1813737f6d 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -35,6 +35,7 @@ #include <linux/slab.h> #include <linux/delay.h> #include <linux/vmalloc.h> +#include <linux/mdio.h> #include "e1000.h" @@ -98,7 +99,6 @@ static const struct e1000_stats e1000_gstrings_stats[] = { E1000_STAT("rx_flow_control_xoff", stats.xoffrxc), E1000_STAT("tx_flow_control_xon", stats.xontxc), E1000_STAT("tx_flow_control_xoff", stats.xofftxc), - E1000_STAT("rx_long_byte_count", stats.gorc), E1000_STAT("rx_csum_offload_good", hw_csum_good), E1000_STAT("rx_csum_offload_errors", hw_csum_err), E1000_STAT("rx_header_split", rx_hdr_split), @@ -108,6 +108,7 @@ static const struct e1000_stats e1000_gstrings_stats[] = { E1000_STAT("dropped_smbus", stats.mgpdc), E1000_STAT("rx_dma_failed", rx_dma_failed), E1000_STAT("tx_dma_failed", tx_dma_failed), + E1000_STAT("rx_hwtstamp_cleared", rx_hwtstamp_cleared), E1000_STAT("uncorr_ecc_errors", uncorr_errors), E1000_STAT("corr_ecc_errors", corr_errors), }; @@ -129,7 +130,6 @@ static int e1000_get_settings(struct net_device *netdev, u32 speed; if (hw->phy.media_type == e1000_media_type_copper) { - ecmd->supported = (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Half | @@ -327,12 +327,12 @@ static int e1000_set_settings(struct net_device *netdev, } /* reset the link */ - if (netif_running(adapter->netdev)) { e1000e_down(adapter); e1000e_up(adapter); - } else + } else { e1000e_reset(adapter); + } clear_bit(__E1000_RESETTING, &adapter->state); return 0; @@ -417,7 +417,7 @@ static void e1000_set_msglevel(struct net_device *netdev, u32 data) adapter->msg_enable = data; } -static int e1000_get_regs_len(struct net_device *netdev) +static int e1000_get_regs_len(struct net_device __always_unused *netdev) { #define E1000_REGS_LEN 32 /* overestimate */ return E1000_REGS_LEN * sizeof(u32); @@ -471,10 +471,10 @@ static void e1000_get_regs(struct net_device *netdev, regs_buff[22] = adapter->phy_stats.receive_errors; regs_buff[23] = regs_buff[13]; /* mdix mode */ } - regs_buff[21] = 0; /* was idle_errors */ - e1e_rphy(hw, PHY_1000T_STATUS, &phy_data); - regs_buff[24] = (u32)phy_data; /* phy local receiver status */ - regs_buff[25] = regs_buff[24]; /* phy remote receiver status */ + regs_buff[21] = 0; /* was idle_errors */ + e1e_rphy(hw, MII_STAT1000, &phy_data); + regs_buff[24] = (u32)phy_data; /* phy local receiver status */ + regs_buff[25] = regs_buff[24]; /* phy remote receiver status */ } static int e1000_get_eeprom_len(struct net_device *netdev) @@ -761,8 +761,9 @@ static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data, (test[pat] & write)); val = E1000_READ_REG_ARRAY(&adapter->hw, reg, offset); if (val != (test[pat] & write & mask)) { - e_err("pattern test reg %04X failed: got 0x%08X expected 0x%08X\n", - reg + offset, val, (test[pat] & write & mask)); + e_err("pattern test failed (reg 0x%05X): got 0x%08X expected 0x%08X\n", + reg + (offset << 2), val, + (test[pat] & write & mask)); *data = reg; return 1; } @@ -777,7 +778,7 @@ static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data, __ew32(&adapter->hw, reg, write & mask); val = __er32(&adapter->hw, reg); if ((write & mask) != (val & mask)) { - e_err("set/check reg %04X test failed: got 0x%08X expected 0x%08X\n", + e_err("set/check test failed (reg 0x%05X): got 0x%08X expected 0x%08X\n", reg, (val & mask), (write & mask)); *data = reg; return 1; @@ -885,12 +886,20 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) E1000_FWSM_WLOCK_MAC_SHIFT; for (i = 0; i < mac->rar_entry_count; i++) { - /* Cannot test write-protected SHRAL[n] registers */ - if ((wlock_mac == 1) || (wlock_mac && (i > wlock_mac))) - continue; + if (mac->type == e1000_pch_lpt) { + /* Cannot test write-protected SHRAL[n] registers */ + if ((wlock_mac == 1) || (wlock_mac && (i > wlock_mac))) + continue; - REG_PATTERN_TEST_ARRAY(E1000_RA, ((i << 1) + 1), - mask, 0xFFFFFFFF); + /* SHRAH[9] different than the others */ + if (i == 10) + mask |= (1 << 30); + else + mask &= ~(1 << 30); + } + + REG_PATTERN_TEST_ARRAY(E1000_RA, ((i << 1) + 1), mask, + 0xFFFFFFFF); } for (i = 0; i < mac->mta_reg_count; i++) @@ -924,7 +933,7 @@ static int e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data) return *data; } -static irqreturn_t e1000_test_intr(int irq, void *data) +static irqreturn_t e1000_test_intr(int __always_unused irq, void *data) { struct net_device *netdev = (struct net_device *) data; struct e1000_adapter *adapter = netdev_priv(netdev); @@ -1274,7 +1283,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) if (hw->phy.type == e1000_phy_ife) { /* force 100, set loopback */ - e1e_wphy(hw, PHY_CONTROL, 0x6100); + e1e_wphy(hw, MII_BMCR, 0x6100); /* Now set up the MAC to the same speed/duplex as the PHY. */ ctrl_reg = er32(CTRL); @@ -1297,9 +1306,9 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) /* Auto-MDI/MDIX Off */ e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, 0x0808); /* reset to update Auto-MDI/MDIX */ - e1e_wphy(hw, PHY_CONTROL, 0x9140); + e1e_wphy(hw, MII_BMCR, 0x9140); /* autoneg off */ - e1e_wphy(hw, PHY_CONTROL, 0x8140); + e1e_wphy(hw, MII_BMCR, 0x8140); break; case e1000_phy_gg82563: e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x1CC); @@ -1311,7 +1320,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) phy_reg |= 0x006; e1e_wphy(hw, PHY_REG(2, 21), phy_reg); /* Assert SW reset for above settings to take effect */ - e1000e_commit_phy(hw); + hw->phy.ops.commit(hw); mdelay(1); /* Force Full Duplex */ e1e_rphy(hw, PHY_REG(769, 16), &phy_reg); @@ -1345,7 +1354,6 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) e1e_rphy(hw, PHY_REG(776, 18), &phy_reg); e1e_wphy(hw, PHY_REG(776, 18), phy_reg | 1); /* Enable loopback on the PHY */ -#define I82577_PHY_LBK_CTRL 19 e1e_wphy(hw, I82577_PHY_LBK_CTRL, 0x8001); break; default: @@ -1353,7 +1361,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) } /* force 1000, set loopback */ - e1e_wphy(hw, PHY_CONTROL, 0x4140); + e1e_wphy(hw, MII_BMCR, 0x4140); mdelay(250); /* Now set up the MAC to the same speed/duplex as the PHY. */ @@ -1395,7 +1403,7 @@ static int e1000_set_82571_fiber_loopback(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; u32 ctrl = er32(CTRL); - int link = 0; + int link; /* special requirements for 82571/82572 fiber adapters */ @@ -1528,11 +1536,12 @@ static void e1000_loopback_cleanup(struct e1000_adapter *adapter) hw->mac.autoneg = 1; if (hw->phy.type == e1000_phy_gg82563) e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x180); - e1e_rphy(hw, PHY_CONTROL, &phy_reg); - if (phy_reg & MII_CR_LOOPBACK) { - phy_reg &= ~MII_CR_LOOPBACK; - e1e_wphy(hw, PHY_CONTROL, phy_reg); - e1000e_commit_phy(hw); + e1e_rphy(hw, MII_BMCR, &phy_reg); + if (phy_reg & BMCR_LOOPBACK) { + phy_reg &= ~BMCR_LOOPBACK; + e1e_wphy(hw, MII_BMCR, phy_reg); + if (hw->phy.ops.commit) + hw->phy.ops.commit(hw); } break; } @@ -1694,7 +1703,8 @@ static int e1000_link_test(struct e1000_adapter *adapter, u64 *data) return *data; } -static int e1000e_get_sset_count(struct net_device *netdev, int sset) +static int e1000e_get_sset_count(struct net_device __always_unused *netdev, + int sset) { switch (sset) { case ETH_SS_TEST: @@ -1957,7 +1967,7 @@ static int e1000_nway_reset(struct net_device *netdev) } static void e1000_get_ethtool_stats(struct net_device *netdev, - struct ethtool_stats *stats, + struct ethtool_stats __always_unused *stats, u64 *data) { struct e1000_adapter *adapter = netdev_priv(netdev); @@ -1986,8 +1996,8 @@ static void e1000_get_ethtool_stats(struct net_device *netdev, } } -static void e1000_get_strings(struct net_device *netdev, u32 stringset, - u8 *data) +static void e1000_get_strings(struct net_device __always_unused *netdev, + u32 stringset, u8 *data) { u8 *p = data; int i; @@ -2007,7 +2017,8 @@ static void e1000_get_strings(struct net_device *netdev, u32 stringset, } static int e1000_get_rxnfc(struct net_device *netdev, - struct ethtool_rxnfc *info, u32 *rule_locs) + struct ethtool_rxnfc *info, + u32 __always_unused *rule_locs) { info->data = 0; @@ -2053,6 +2064,171 @@ static int e1000_get_rxnfc(struct net_device *netdev, } } +static int e1000e_get_eee(struct net_device *netdev, struct ethtool_eee *edata) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u16 cap_addr, adv_addr, lpa_addr, pcs_stat_addr, phy_data, lpi_ctrl; + u32 status, ret_val; + + if (!(adapter->flags & FLAG_IS_ICH) || + !(adapter->flags2 & FLAG2_HAS_EEE)) + return -EOPNOTSUPP; + + switch (hw->phy.type) { + case e1000_phy_82579: + cap_addr = I82579_EEE_CAPABILITY; + adv_addr = I82579_EEE_ADVERTISEMENT; + lpa_addr = I82579_EEE_LP_ABILITY; + pcs_stat_addr = I82579_EEE_PCS_STATUS; + break; + case e1000_phy_i217: + cap_addr = I217_EEE_CAPABILITY; + adv_addr = I217_EEE_ADVERTISEMENT; + lpa_addr = I217_EEE_LP_ABILITY; + pcs_stat_addr = I217_EEE_PCS_STATUS; + break; + default: + return -EOPNOTSUPP; + } + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return -EBUSY; + + /* EEE Capability */ + ret_val = e1000_read_emi_reg_locked(hw, cap_addr, &phy_data); + if (ret_val) + goto release; + edata->supported = mmd_eee_cap_to_ethtool_sup_t(phy_data); + + /* EEE Advertised */ + ret_val = e1000_read_emi_reg_locked(hw, adv_addr, &phy_data); + if (ret_val) + goto release; + edata->advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data); + + /* EEE Link Partner Advertised */ + ret_val = e1000_read_emi_reg_locked(hw, lpa_addr, &phy_data); + if (ret_val) + goto release; + edata->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data); + + /* EEE PCS Status */ + ret_val = e1000_read_emi_reg_locked(hw, pcs_stat_addr, &phy_data); + if (hw->phy.type == e1000_phy_82579) + phy_data <<= 8; + +release: + hw->phy.ops.release(hw); + if (ret_val) + return -ENODATA; + + e1e_rphy(hw, I82579_LPI_CTRL, &lpi_ctrl); + status = er32(STATUS); + + /* Result of the EEE auto negotiation - there is no register that + * has the status of the EEE negotiation so do a best-guess based + * on whether both Tx and Rx LPI indications have been received or + * base it on the link speed, the EEE advertised speeds on both ends + * and the speeds on which EEE is enabled locally. + */ + if (((phy_data & E1000_EEE_TX_LPI_RCVD) && + (phy_data & E1000_EEE_RX_LPI_RCVD)) || + ((status & E1000_STATUS_SPEED_100) && + (edata->advertised & ADVERTISED_100baseT_Full) && + (edata->lp_advertised & ADVERTISED_100baseT_Full) && + (lpi_ctrl & I82579_LPI_CTRL_100_ENABLE)) || + ((status & E1000_STATUS_SPEED_1000) && + (edata->advertised & ADVERTISED_1000baseT_Full) && + (edata->lp_advertised & ADVERTISED_1000baseT_Full) && + (lpi_ctrl & I82579_LPI_CTRL_1000_ENABLE))) + edata->eee_active = true; + + edata->eee_enabled = !hw->dev_spec.ich8lan.eee_disable; + edata->tx_lpi_enabled = true; + edata->tx_lpi_timer = er32(LPIC) >> E1000_LPIC_LPIET_SHIFT; + + return 0; +} + +static int e1000e_set_eee(struct net_device *netdev, struct ethtool_eee *edata) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + struct ethtool_eee eee_curr; + s32 ret_val; + + if (!(adapter->flags & FLAG_IS_ICH) || + !(adapter->flags2 & FLAG2_HAS_EEE)) + return -EOPNOTSUPP; + + ret_val = e1000e_get_eee(netdev, &eee_curr); + if (ret_val) + return ret_val; + + if (eee_curr.advertised != edata->advertised) { + e_err("Setting EEE advertisement is not supported\n"); + return -EINVAL; + } + + if (eee_curr.tx_lpi_enabled != edata->tx_lpi_enabled) { + e_err("Setting EEE tx-lpi is not supported\n"); + return -EINVAL; + } + + if (eee_curr.tx_lpi_timer != edata->tx_lpi_timer) { + e_err("Setting EEE Tx LPI timer is not supported\n"); + return -EINVAL; + } + + if (hw->dev_spec.ich8lan.eee_disable != !edata->eee_enabled) { + hw->dev_spec.ich8lan.eee_disable = !edata->eee_enabled; + + /* reset the link */ + if (netif_running(netdev)) + e1000e_reinit_locked(adapter); + else + e1000e_reset(adapter); + } + + return 0; +} + +static int e1000e_get_ts_info(struct net_device *netdev, + struct ethtool_ts_info *info) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + + ethtool_op_get_ts_info(netdev, info); + + if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP)) + return 0; + + info->so_timestamping |= (SOF_TIMESTAMPING_TX_HARDWARE | + SOF_TIMESTAMPING_RX_HARDWARE | + SOF_TIMESTAMPING_RAW_HARDWARE); + + info->tx_types = (1 << HWTSTAMP_TX_OFF) | (1 << HWTSTAMP_TX_ON); + + info->rx_filters = ((1 << HWTSTAMP_FILTER_NONE) | + (1 << HWTSTAMP_FILTER_PTP_V1_L4_SYNC) | + (1 << HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ) | + (1 << HWTSTAMP_FILTER_PTP_V2_L4_SYNC) | + (1 << HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ) | + (1 << HWTSTAMP_FILTER_PTP_V2_L2_SYNC) | + (1 << HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ) | + (1 << HWTSTAMP_FILTER_PTP_V2_EVENT) | + (1 << HWTSTAMP_FILTER_PTP_V2_SYNC) | + (1 << HWTSTAMP_FILTER_PTP_V2_DELAY_REQ) | + (1 << HWTSTAMP_FILTER_ALL)); + + if (adapter->ptp_clock) + info->phc_index = ptp_clock_index(adapter->ptp_clock); + + return 0; +} + static const struct ethtool_ops e1000_ethtool_ops = { .get_settings = e1000_get_settings, .set_settings = e1000_set_settings, @@ -2080,7 +2256,9 @@ static const struct ethtool_ops e1000_ethtool_ops = { .get_coalesce = e1000_get_coalesce, .set_coalesce = e1000_set_coalesce, .get_rxnfc = e1000_get_rxnfc, - .get_ts_info = ethtool_op_get_ts_info, + .get_ts_info = e1000e_get_ts_info, + .get_eee = e1000e_get_eee, + .set_eee = e1000e_set_eee, }; void e1000e_set_ethtool_ops(struct net_device *netdev) |