aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/e1000e
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e')
-rw-r--r--drivers/net/ethernet/intel/e1000e/80003es2lan.c99
-rw-r--r--drivers/net/ethernet/intel/e1000e/82571.c147
-rw-r--r--drivers/net/ethernet/intel/e1000e/Makefile5
-rw-r--r--drivers/net/ethernet/intel/e1000e/defines.h11
-rw-r--r--drivers/net/ethernet/intel/e1000e/e1000.h52
-rw-r--r--drivers/net/ethernet/intel/e1000e/ethtool.c207
-rw-r--r--drivers/net/ethernet/intel/e1000e/hw.h13
-rw-r--r--drivers/net/ethernet/intel/e1000e/ich8lan.c433
-rw-r--r--drivers/net/ethernet/intel/e1000e/mac.c (renamed from drivers/net/ethernet/intel/e1000e/lib.c)1132
-rw-r--r--drivers/net/ethernet/intel/e1000e/manage.c367
-rw-r--r--drivers/net/ethernet/intel/e1000e/netdev.c727
-rw-r--r--drivers/net/ethernet/intel/e1000e/nvm.c643
-rw-r--r--drivers/net/ethernet/intel/e1000e/param.c55
-rw-r--r--drivers/net/ethernet/intel/e1000e/phy.c327
14 files changed, 2177 insertions, 2041 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
index e1159e54334a..bac9dda31b6c 100644
--- a/drivers/net/ethernet/intel/e1000e/80003es2lan.c
+++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -201,19 +201,23 @@ static s32 e1000_init_nvm_params_80003es2lan(struct e1000_hw *hw)
* e1000_init_mac_params_80003es2lan - Init ESB2 MAC func ptrs.
* @hw: pointer to the HW structure
**/
-static s32 e1000_init_mac_params_80003es2lan(struct e1000_adapter *adapter)
+static s32 e1000_init_mac_params_80003es2lan(struct e1000_hw *hw)
{
- struct e1000_hw *hw = &adapter->hw;
struct e1000_mac_info *mac = &hw->mac;
- struct e1000_mac_operations *func = &mac->ops;
- /* Set media type */
- switch (adapter->pdev->device) {
+ /* Set media type and media-dependent function pointers */
+ switch (hw->adapter->pdev->device) {
case E1000_DEV_ID_80003ES2LAN_SERDES_DPT:
hw->phy.media_type = e1000_media_type_internal_serdes;
+ mac->ops.check_for_link = e1000e_check_for_serdes_link;
+ mac->ops.setup_physical_interface =
+ e1000e_setup_fiber_serdes_link;
break;
default:
hw->phy.media_type = e1000_media_type_copper;
+ mac->ops.check_for_link = e1000e_check_for_copper_link;
+ mac->ops.setup_physical_interface =
+ e1000_setup_copper_link_80003es2lan;
break;
}
@@ -230,25 +234,6 @@ static s32 e1000_init_mac_params_80003es2lan(struct e1000_adapter *adapter)
/* Adaptive IFS not supported */
mac->adaptive_ifs = false;
- /* check for link */
- switch (hw->phy.media_type) {
- case e1000_media_type_copper:
- func->setup_physical_interface = e1000_setup_copper_link_80003es2lan;
- func->check_for_link = e1000e_check_for_copper_link;
- break;
- case e1000_media_type_fiber:
- func->setup_physical_interface = e1000e_setup_fiber_serdes_link;
- func->check_for_link = e1000e_check_for_fiber_link;
- break;
- case e1000_media_type_internal_serdes:
- func->setup_physical_interface = e1000e_setup_fiber_serdes_link;
- func->check_for_link = e1000e_check_for_serdes_link;
- break;
- default:
- return -E1000_ERR_CONFIG;
- break;
- }
-
/* set lan id for port to determine which phy lock to use */
hw->mac.ops.set_lan_id(hw);
@@ -260,7 +245,7 @@ static s32 e1000_get_variants_80003es2lan(struct e1000_adapter *adapter)
struct e1000_hw *hw = &adapter->hw;
s32 rc;
- rc = e1000_init_mac_params_80003es2lan(adapter);
+ rc = e1000_init_mac_params_80003es2lan(hw);
if (rc)
return rc;
@@ -304,7 +289,7 @@ static void e1000_release_phy_80003es2lan(struct e1000_hw *hw)
}
/**
- * e1000_acquire_mac_csr_80003es2lan - Acquire rights to access Kumeran register
+ * e1000_acquire_mac_csr_80003es2lan - Acquire right to access Kumeran register
* @hw: pointer to the HW structure
*
* Acquire the semaphore to access the Kumeran interface.
@@ -320,7 +305,7 @@ static s32 e1000_acquire_mac_csr_80003es2lan(struct e1000_hw *hw)
}
/**
- * e1000_release_mac_csr_80003es2lan - Release rights to access Kumeran Register
+ * e1000_release_mac_csr_80003es2lan - Release right to access Kumeran Register
* @hw: pointer to the HW structure
*
* Release the semaphore used to access the Kumeran interface
@@ -473,7 +458,7 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
return ret_val;
}
- if (hw->dev_spec.e80003es2lan.mdic_wa_enable == true) {
+ if (hw->dev_spec.e80003es2lan.mdic_wa_enable) {
/*
* The "ready" bit in the MDIC register may be incorrectly set
* before the device has completed the "Page Select" MDI
@@ -485,9 +470,8 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
ret_val = e1000e_read_phy_reg_mdic(hw, page_select, &temp);
if (((u16)offset >> GG82563_PAGE_SHIFT) != temp) {
- ret_val = -E1000_ERR_PHY;
e1000_release_phy_80003es2lan(hw);
- return ret_val;
+ return -E1000_ERR_PHY;
}
udelay(200);
@@ -545,7 +529,7 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
return ret_val;
}
- if (hw->dev_spec.e80003es2lan.mdic_wa_enable == true) {
+ if (hw->dev_spec.e80003es2lan.mdic_wa_enable) {
/*
* The "ready" bit in the MDIC register may be incorrectly set
* before the device has completed the "Page Select" MDI
@@ -667,8 +651,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw)
udelay(1);
if (hw->phy.autoneg_wait_to_complete) {
- e_dbg("Waiting for forced speed/duplex link "
- "on GG82563 phy.\n");
+ e_dbg("Waiting for forced speed/duplex link on GG82563 phy.\n");
ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
100000, &link);
@@ -731,22 +714,19 @@ static s32 e1000_get_cable_length_80003es2lan(struct e1000_hw *hw)
ret_val = e1e_rphy(hw, GG82563_PHY_DSP_DISTANCE, &phy_data);
if (ret_val)
- goto out;
+ return ret_val;
index = phy_data & GG82563_DSPD_CABLE_LENGTH;
- if (index >= GG82563_CABLE_LENGTH_TABLE_SIZE - 5) {
- ret_val = -E1000_ERR_PHY;
- goto out;
- }
+ if (index >= GG82563_CABLE_LENGTH_TABLE_SIZE - 5)
+ return -E1000_ERR_PHY;
phy->min_cable_length = e1000_gg82563_cable_length_table[index];
phy->max_cable_length = e1000_gg82563_cable_length_table[index + 5];
phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
-out:
- return ret_val;
+ return 0;
}
/**
@@ -820,9 +800,7 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw)
ew32(IMC, 0xffffffff);
er32(ICR);
- ret_val = e1000_check_alt_mac_addr_generic(hw);
-
- return ret_val;
+ return e1000_check_alt_mac_addr_generic(hw);
}
/**
@@ -842,7 +820,7 @@ static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw)
e1000_initialize_hw_bits_80003es2lan(hw);
/* Initialize identification LED */
- ret_val = e1000e_id_led_init(hw);
+ ret_val = mac->ops.id_led_init(hw);
if (ret_val)
e_dbg("Error initializing identification LED\n");
/* This is not fatal and we should not stop init due to this */
@@ -860,7 +838,7 @@ static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw)
E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
/* Setup link and flow control */
- ret_val = e1000e_setup_link(hw);
+ ret_val = mac->ops.setup_link(hw);
/* Disable IBIST slave mode (far-end loopback) */
e1000_read_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
@@ -1078,7 +1056,7 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
* firmware will have already initialized them. We only initialize
* them if the HW is not in IAMT mode.
*/
- if (!e1000e_check_mng_mode(hw)) {
+ if (!hw->mac.ops.check_mng_mode(hw)) {
/* Enable Electrical Idle on the PHY */
data |= GG82563_PMCR_ENABLE_ELECTRICAL_IDLE;
ret_val = e1e_wphy(hw, GG82563_PHY_PWR_MGMT_CTRL, data);
@@ -1163,9 +1141,7 @@ static s32 e1000_setup_copper_link_80003es2lan(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- ret_val = e1000e_setup_copper_link(hw);
-
- return 0;
+ return e1000e_setup_copper_link(hw);
}
/**
@@ -1241,9 +1217,7 @@ static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex)
else
reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
- ret_val = e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
-
- return 0;
+ return e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
}
/**
@@ -1285,9 +1259,8 @@ static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw)
} while ((reg_data != reg_data2) && (i < GG82563_MAX_KMRN_RETRY));
reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
- ret_val = e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
- return ret_val;
+ return e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
}
/**
@@ -1372,12 +1345,9 @@ static s32 e1000_read_mac_addr_80003es2lan(struct e1000_hw *hw)
*/
ret_val = e1000_check_alt_mac_addr_generic(hw);
if (ret_val)
- goto out;
-
- ret_val = e1000_read_mac_addr_generic(hw);
+ return ret_val;
-out:
- return ret_val;
+ return e1000_read_mac_addr_generic(hw);
}
/**
@@ -1443,7 +1413,7 @@ static void e1000_clear_hw_cntrs_80003es2lan(struct e1000_hw *hw)
static const struct e1000_mac_operations es2_mac_ops = {
.read_mac_addr = e1000_read_mac_addr_80003es2lan,
- .id_led_init = e1000e_id_led_init,
+ .id_led_init = e1000e_id_led_init_generic,
.blink_led = e1000e_blink_led_generic,
.check_mng_mode = e1000e_check_mng_mode_generic,
/* check_for_link dependent on media type */
@@ -1459,9 +1429,10 @@ static const struct e1000_mac_operations es2_mac_ops = {
.clear_vfta = e1000_clear_vfta_generic,
.reset_hw = e1000_reset_hw_80003es2lan,
.init_hw = e1000_init_hw_80003es2lan,
- .setup_link = e1000e_setup_link,
+ .setup_link = e1000e_setup_link_generic,
/* setup_physical_interface dependent on media type */
.setup_led = e1000e_setup_led_generic,
+ .config_collision_dist = e1000e_config_collision_dist_generic,
};
static const struct e1000_phy_operations es2_phy_ops = {
@@ -1486,6 +1457,7 @@ static const struct e1000_nvm_operations es2_nvm_ops = {
.acquire = e1000_acquire_nvm_80003es2lan,
.read = e1000e_read_nvm_eerd,
.release = e1000_release_nvm_80003es2lan,
+ .reload = e1000e_reload_nvm_generic,
.update = e1000e_update_nvm_checksum_generic,
.valid_led_default = e1000e_valid_led_default,
.validate = e1000e_validate_nvm_checksum_generic,
@@ -1502,8 +1474,7 @@ const struct e1000_info e1000_es2_info = {
| FLAG_RX_NEEDS_RESTART /* errata */
| FLAG_TARC_SET_BIT_ZERO /* errata */
| FLAG_APME_CHECK_PORT_B
- | FLAG_DISABLE_FC_PAUSE_TIME /* errata */
- | FLAG_TIPG_MEDIUM_FOR_80003ESLAN,
+ | FLAG_DISABLE_FC_PAUSE_TIME, /* errata */
.flags2 = FLAG2_DMA_BURST,
.pba = 38,
.max_hw_frame_size = DEFAULT_JUMBO,
diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c
index a3e65fd26e09..b3fdc6977f2e 100644
--- a/drivers/net/ethernet/intel/e1000e/82571.c
+++ b/drivers/net/ethernet/intel/e1000e/82571.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -235,30 +235,42 @@ static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw)
* e1000_init_mac_params_82571 - Init MAC func ptrs.
* @hw: pointer to the HW structure
**/
-static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
+static s32 e1000_init_mac_params_82571(struct e1000_hw *hw)
{
- struct e1000_hw *hw = &adapter->hw;
struct e1000_mac_info *mac = &hw->mac;
- struct e1000_mac_operations *func = &mac->ops;
u32 swsm = 0;
u32 swsm2 = 0;
bool force_clear_smbi = false;
- /* Set media type */
- switch (adapter->pdev->device) {
+ /* Set media type and media-dependent function pointers */
+ switch (hw->adapter->pdev->device) {
case E1000_DEV_ID_82571EB_FIBER:
case E1000_DEV_ID_82572EI_FIBER:
case E1000_DEV_ID_82571EB_QUAD_FIBER:
hw->phy.media_type = e1000_media_type_fiber;
+ mac->ops.setup_physical_interface =
+ e1000_setup_fiber_serdes_link_82571;
+ mac->ops.check_for_link = e1000e_check_for_fiber_link;
+ mac->ops.get_link_up_info =
+ e1000e_get_speed_and_duplex_fiber_serdes;
break;
case E1000_DEV_ID_82571EB_SERDES:
- case E1000_DEV_ID_82572EI_SERDES:
case E1000_DEV_ID_82571EB_SERDES_DUAL:
case E1000_DEV_ID_82571EB_SERDES_QUAD:
+ case E1000_DEV_ID_82572EI_SERDES:
hw->phy.media_type = e1000_media_type_internal_serdes;
+ mac->ops.setup_physical_interface =
+ e1000_setup_fiber_serdes_link_82571;
+ mac->ops.check_for_link = e1000_check_for_serdes_link_82571;
+ mac->ops.get_link_up_info =
+ e1000e_get_speed_and_duplex_fiber_serdes;
break;
default:
hw->phy.media_type = e1000_media_type_copper;
+ mac->ops.setup_physical_interface =
+ e1000_setup_copper_link_82571;
+ mac->ops.check_for_link = e1000e_check_for_copper_link;
+ mac->ops.get_link_up_info = e1000e_get_speed_and_duplex_copper;
break;
}
@@ -269,38 +281,13 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
/* Adaptive IFS supported */
mac->adaptive_ifs = true;
- /* check for link */
- switch (hw->phy.media_type) {
- case e1000_media_type_copper:
- func->setup_physical_interface = e1000_setup_copper_link_82571;
- func->check_for_link = e1000e_check_for_copper_link;
- func->get_link_up_info = e1000e_get_speed_and_duplex_copper;
- break;
- case e1000_media_type_fiber:
- func->setup_physical_interface =
- e1000_setup_fiber_serdes_link_82571;
- func->check_for_link = e1000e_check_for_fiber_link;
- func->get_link_up_info =
- e1000e_get_speed_and_duplex_fiber_serdes;
- break;
- case e1000_media_type_internal_serdes:
- func->setup_physical_interface =
- e1000_setup_fiber_serdes_link_82571;
- func->check_for_link = e1000_check_for_serdes_link_82571;
- func->get_link_up_info =
- e1000e_get_speed_and_duplex_fiber_serdes;
- break;
- default:
- return -E1000_ERR_CONFIG;
- break;
- }
-
+ /* MAC-specific function pointers */
switch (hw->mac.type) {
case e1000_82573:
- func->set_lan_id = e1000_set_lan_id_single_port;
- func->check_mng_mode = e1000e_check_mng_mode_generic;
- func->led_on = e1000e_led_on_generic;
- func->blink_led = e1000e_blink_led_generic;
+ mac->ops.set_lan_id = e1000_set_lan_id_single_port;
+ mac->ops.check_mng_mode = e1000e_check_mng_mode_generic;
+ mac->ops.led_on = e1000e_led_on_generic;
+ mac->ops.blink_led = e1000e_blink_led_generic;
/* FWSM register */
mac->has_fwsm = true;
@@ -314,14 +301,14 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
break;
case e1000_82574:
case e1000_82583:
- func->set_lan_id = e1000_set_lan_id_single_port;
- func->check_mng_mode = e1000_check_mng_mode_82574;
- func->led_on = e1000_led_on_82574;
+ mac->ops.set_lan_id = e1000_set_lan_id_single_port;
+ mac->ops.check_mng_mode = e1000_check_mng_mode_82574;
+ mac->ops.led_on = e1000_led_on_82574;
break;
default:
- func->check_mng_mode = e1000e_check_mng_mode_generic;
- func->led_on = e1000e_led_on_generic;
- func->blink_led = e1000e_blink_led_generic;
+ mac->ops.check_mng_mode = e1000e_check_mng_mode_generic;
+ mac->ops.led_on = e1000e_led_on_generic;
+ mac->ops.blink_led = e1000e_blink_led_generic;
/* FWSM register */
mac->has_fwsm = true;
@@ -342,11 +329,11 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
if (!(swsm2 & E1000_SWSM2_LOCK)) {
/* Only do this for the first interface on this card */
- ew32(SWSM2,
- swsm2 | E1000_SWSM2_LOCK);
+ ew32(SWSM2, swsm2 | E1000_SWSM2_LOCK);
force_clear_smbi = true;
- } else
+ } else {
force_clear_smbi = false;
+ }
break;
default:
force_clear_smbi = true;
@@ -383,7 +370,7 @@ static s32 e1000_get_variants_82571(struct e1000_adapter *adapter)
int is_port_b = er32(STATUS) & E1000_STATUS_FUNC_1;
s32 rc;
- rc = e1000_init_mac_params_82571(adapter);
+ rc = e1000_init_mac_params_82571(hw);
if (rc)
return rc;
@@ -577,7 +564,6 @@ static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw)
static s32 e1000_get_hw_semaphore_82573(struct e1000_hw *hw)
{
u32 extcnf_ctrl;
- s32 ret_val = 0;
s32 i = 0;
extcnf_ctrl = er32(EXTCNF_CTRL);
@@ -599,12 +585,10 @@ static s32 e1000_get_hw_semaphore_82573(struct e1000_hw *hw)
/* Release semaphores */
e1000_put_hw_semaphore_82573(hw);
e_dbg("Driver can't access the PHY\n");
- ret_val = -E1000_ERR_PHY;
- goto out;
+ return -E1000_ERR_PHY;
}
-out:
- return ret_val;
+ return 0;
}
/**
@@ -809,7 +793,7 @@ static s32 e1000_update_nvm_checksum_82571(struct e1000_hw *hw)
* otherwise, commit the checksum to the flash NVM.
*/
if (hw->nvm.type != e1000_nvm_flash_hw)
- return ret_val;
+ return 0;
/* Check for pending operations. */
for (i = 0; i < E1000_FLASH_UPDATES; i++) {
@@ -1134,7 +1118,7 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw)
e1000_initialize_hw_bits_82571(hw);
/* Initialize identification LED */
- ret_val = e1000e_id_led_init(hw);
+ ret_val = mac->ops.id_led_init(hw);
if (ret_val)
e_dbg("Error initializing identification LED\n");
/* This is not fatal and we should not stop init due to this */
@@ -1159,7 +1143,7 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw)
E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
/* Setup link and flow control */
- ret_val = e1000_setup_link_82571(hw);
+ ret_val = mac->ops.setup_link(hw);
/* Set the transmit descriptor write-back policy */
reg_data = er32(TXDCTL(0));
@@ -1227,6 +1211,10 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw)
case e1000_82572:
reg |= (1 << 23) | (1 << 24) | (1 << 25) | (1 << 26);
break;
+ case e1000_82574:
+ case e1000_82583:
+ reg |= (1 << 26);
+ break;
default:
break;
}
@@ -1281,18 +1269,16 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw)
reg |= E1000_PBA_ECC_CORR_EN;
ew32(PBA_ECC, reg);
}
+
/*
* Workaround for hardware errata.
* Ensure that DMA Dynamic Clock gating is disabled on 82571 and 82572
*/
-
- if ((hw->mac.type == e1000_82571) ||
- (hw->mac.type == e1000_82572)) {
- reg = er32(CTRL_EXT);
- reg &= ~E1000_CTRL_EXT_DMA_DYN_CLK_EN;
- ew32(CTRL_EXT, reg);
- }
-
+ if ((hw->mac.type == e1000_82571) || (hw->mac.type == e1000_82572)) {
+ reg = er32(CTRL_EXT);
+ reg &= ~E1000_CTRL_EXT_DMA_DYN_CLK_EN;
+ ew32(CTRL_EXT, reg);
+ }
/* PCI-Ex Control Registers */
switch (hw->mac.type) {
@@ -1418,7 +1404,6 @@ bool e1000_check_phy_82574(struct e1000_hw *hw)
{
u16 status_1kbt = 0;
u16 receive_errors = 0;
- bool phy_hung = false;
s32 ret_val = 0;
/*
@@ -1426,19 +1411,18 @@ bool e1000_check_phy_82574(struct e1000_hw *hw)
* read the Base1000T status register If both are max then PHY is hung.
*/
ret_val = e1e_rphy(hw, E1000_RECEIVE_ERROR_COUNTER, &receive_errors);
-
if (ret_val)
- goto out;
+ return false;
if (receive_errors == E1000_RECEIVE_ERROR_MAX) {
ret_val = e1e_rphy(hw, E1000_BASE1000T_STATUS, &status_1kbt);
if (ret_val)
- goto out;
+ return false;
if ((status_1kbt & E1000_IDLE_ERROR_COUNT_MASK) ==
E1000_IDLE_ERROR_COUNT_MASK)
- phy_hung = true;
+ return true;
}
-out:
- return phy_hung;
+
+ return false;
}
/**
@@ -1469,7 +1453,7 @@ static s32 e1000_setup_link_82571(struct e1000_hw *hw)
break;
}
- return e1000e_setup_link(hw);
+ return e1000e_setup_link_generic(hw);
}
/**
@@ -1506,9 +1490,7 @@ static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- ret_val = e1000e_setup_copper_link(hw);
-
- return ret_val;
+ return e1000e_setup_copper_link(hw);
}
/**
@@ -1842,9 +1824,9 @@ static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw)
**/
static s32 e1000_read_mac_addr_82571(struct e1000_hw *hw)
{
- s32 ret_val = 0;
-
if (hw->mac.type == e1000_82571) {
+ s32 ret_val = 0;
+
/*
* If there's an alternate MAC address place it in RAR0
* so that it will override the Si installed default perm
@@ -1852,13 +1834,10 @@ static s32 e1000_read_mac_addr_82571(struct e1000_hw *hw)
*/
ret_val = e1000_check_alt_mac_addr_generic(hw);
if (ret_val)
- goto out;
+ return ret_val;
}
- ret_val = e1000_read_mac_addr_generic(hw);
-
-out:
- return ret_val;
+ return e1000_read_mac_addr_generic(hw);
}
/**
@@ -1873,7 +1852,7 @@ static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw)
struct e1000_phy_info *phy = &hw->phy;
struct e1000_mac_info *mac = &hw->mac;
- if (!(phy->ops.check_reset_block))
+ if (!phy->ops.check_reset_block)
return;
/* If the management interface is not enabled, then power down */
@@ -1930,7 +1909,7 @@ static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw)
static const struct e1000_mac_operations e82571_mac_ops = {
/* .check_mng_mode: mac type dependent */
/* .check_for_link: media type dependent */
- .id_led_init = e1000e_id_led_init,
+ .id_led_init = e1000e_id_led_init_generic,
.cleanup_led = e1000e_cleanup_led_generic,
.clear_hw_cntrs = e1000_clear_hw_cntrs_82571,
.get_bus_info = e1000e_get_bus_info_pcie,
@@ -1946,6 +1925,7 @@ static const struct e1000_mac_operations e82571_mac_ops = {
.setup_link = e1000_setup_link_82571,
/* .setup_physical_interface: media type dependent */
.setup_led = e1000e_setup_led_generic,
+ .config_collision_dist = e1000e_config_collision_dist_generic,
.read_mac_addr = e1000_read_mac_addr_82571,
};
@@ -2007,6 +1987,7 @@ static const struct e1000_nvm_operations e82571_nvm_ops = {
.acquire = e1000_acquire_nvm_82571,
.read = e1000e_read_nvm_eerd,
.release = e1000_release_nvm_82571,
+ .reload = e1000e_reload_nvm_generic,
.update = e1000_update_nvm_checksum_82571,
.valid_led_default = e1000_valid_led_default_82571,
.validate = e1000_validate_nvm_checksum_82571,
diff --git a/drivers/net/ethernet/intel/e1000e/Makefile b/drivers/net/ethernet/intel/e1000e/Makefile
index 948c05db5d68..591b71324505 100644
--- a/drivers/net/ethernet/intel/e1000e/Makefile
+++ b/drivers/net/ethernet/intel/e1000e/Makefile
@@ -1,7 +1,7 @@
################################################################################
#
# Intel PRO/1000 Linux driver
-# Copyright(c) 1999 - 2011 Intel Corporation.
+# Copyright(c) 1999 - 2012 Intel Corporation.
#
# This program is free software; you can redistribute it and/or modify it
# under the terms and conditions of the GNU General Public License,
@@ -33,5 +33,6 @@
obj-$(CONFIG_E1000E) += e1000e.o
e1000e-objs := 82571.o ich8lan.o 80003es2lan.o \
- lib.o phy.o param.o ethtool.o netdev.o
+ mac.o manage.o nvm.o phy.o \
+ param.o ethtool.o netdev.o
diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h
index c516a7440bec..3a5025917163 100644
--- a/drivers/net/ethernet/intel/e1000e/defines.h
+++ b/drivers/net/ethernet/intel/e1000e/defines.h
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -126,6 +126,13 @@
E1000_RXDEXT_STATERR_CXE | \
E1000_RXDEXT_STATERR_RXE)
+#define E1000_MRQC_RSS_FIELD_MASK 0xFFFF0000
+#define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000
+#define E1000_MRQC_RSS_FIELD_IPV4 0x00020000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX 0x00040000
+#define E1000_MRQC_RSS_FIELD_IPV6 0x00100000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00200000
+
#define E1000_RXDPS_HDRSTAT_HDRSP 0x00008000
/* Management Control */
@@ -170,6 +177,7 @@
#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */
#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */
#define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */
+#define E1000_RCTL_DPF 0x00400000 /* Discard Pause Frames */
#define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */
#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */
#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */
@@ -326,6 +334,7 @@
/* Receive Checksum Control */
#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */
#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */
+#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */
/* Header split receive */
#define E1000_RFCTL_NFSW_DIS 0x00000040
diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
index f478a22ed577..86cdd4793992 100644
--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -234,6 +234,7 @@ struct e1000_buffer {
};
struct e1000_ring {
+ struct e1000_adapter *adapter; /* back pointer to adapter */
void *desc; /* pointer to ring memory */
dma_addr_t dma; /* phys address of ring */
unsigned int size; /* length of ring in bytes */
@@ -242,8 +243,8 @@ struct e1000_ring {
u16 next_to_use;
u16 next_to_clean;
- u16 head;
- u16 tail;
+ void __iomem *head;
+ void __iomem *tail;
/* array of buffer information structs */
struct e1000_buffer *buffer_info;
@@ -251,7 +252,7 @@ struct e1000_ring {
char name[IFNAMSIZ + 5];
u32 ims_val;
u32 itr_val;
- u16 itr_register;
+ void __iomem *itr_register;
int set_itr;
struct sk_buff *rx_skb_top;
@@ -334,11 +335,10 @@ struct e1000_adapter {
/*
* Rx
*/
- bool (*clean_rx) (struct e1000_adapter *adapter,
- int *work_done, int work_to_do)
- ____cacheline_aligned_in_smp;
- void (*alloc_rx_buf) (struct e1000_adapter *adapter,
- int cleaned_count, gfp_t gfp);
+ bool (*clean_rx) (struct e1000_ring *ring, int *work_done,
+ int work_to_do) ____cacheline_aligned_in_smp;
+ void (*alloc_rx_buf) (struct e1000_ring *ring, int cleaned_count,
+ gfp_t gfp);
struct e1000_ring *rx_ring;
u32 rx_int_delay;
@@ -398,6 +398,9 @@ struct e1000_adapter {
bool idle_check;
int phy_hang_count;
+
+ u16 tx_ring_count;
+ u16 rx_ring_count;
};
struct e1000_info {
@@ -417,7 +420,7 @@ struct e1000_info {
#define FLAG_HAS_FLASH (1 << 1)
#define FLAG_HAS_HW_VLAN_FILTER (1 << 2)
#define FLAG_HAS_WOL (1 << 3)
-#define FLAG_HAS_ERT (1 << 4)
+/* reserved bit4 */
#define FLAG_HAS_CTRLEXT_ON_LOAD (1 << 5)
#define FLAG_HAS_SWSM_ON_LOAD (1 << 6)
#define FLAG_HAS_JUMBO_FRAMES (1 << 7)
@@ -427,7 +430,7 @@ struct e1000_info {
#define FLAG_HAS_SMART_POWER_DOWN (1 << 11)
#define FLAG_IS_QUAD_PORT_A (1 << 12)
#define FLAG_IS_QUAD_PORT (1 << 13)
-#define FLAG_TIPG_MEDIUM_FOR_80003ESLAN (1 << 14)
+/* reserved bit14 */
#define FLAG_APME_IN_WUC (1 << 15)
#define FLAG_APME_IN_CTRL3 (1 << 16)
#define FLAG_APME_CHECK_PORT_B (1 << 17)
@@ -458,6 +461,7 @@ struct e1000_info {
#define FLAG2_CHECK_PHY_HANG (1 << 9)
#define FLAG2_NO_DISABLE_RX (1 << 10)
#define FLAG2_PCIM2PCI_ARBITER_WA (1 << 11)
+#define FLAG2_DFLT_CRC_STRIPPING (1 << 12)
#define E1000_RX_DESC_PS(R, i) \
(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
@@ -492,10 +496,10 @@ extern void e1000e_down(struct e1000_adapter *adapter);
extern void e1000e_reinit_locked(struct e1000_adapter *adapter);
extern void e1000e_reset(struct e1000_adapter *adapter);
extern void e1000e_power_up_phy(struct e1000_adapter *adapter);
-extern int e1000e_setup_rx_resources(struct e1000_adapter *adapter);
-extern int e1000e_setup_tx_resources(struct e1000_adapter *adapter);
-extern void e1000e_free_rx_resources(struct e1000_adapter *adapter);
-extern void e1000e_free_tx_resources(struct e1000_adapter *adapter);
+extern int e1000e_setup_rx_resources(struct e1000_ring *ring);
+extern int e1000e_setup_tx_resources(struct e1000_ring *ring);
+extern void e1000e_free_rx_resources(struct e1000_ring *ring);
+extern void e1000e_free_tx_resources(struct e1000_ring *ring);
extern struct rtnl_link_stats64 *e1000e_get_stats64(struct net_device *netdev,
struct rtnl_link_stats64
*stats);
@@ -555,12 +559,12 @@ extern s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u
extern s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed, u16 *duplex);
extern s32 e1000e_disable_pcie_master(struct e1000_hw *hw);
extern s32 e1000e_get_auto_rd_done(struct e1000_hw *hw);
-extern s32 e1000e_id_led_init(struct e1000_hw *hw);
+extern s32 e1000e_id_led_init_generic(struct e1000_hw *hw);
extern void e1000e_clear_hw_cntrs_base(struct e1000_hw *hw);
extern s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw);
extern s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw);
extern s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw);
-extern s32 e1000e_setup_link(struct e1000_hw *hw);
+extern s32 e1000e_setup_link_generic(struct e1000_hw *hw);
extern void e1000_clear_vfta_generic(struct e1000_hw *hw);
extern void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count);
extern void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw,
@@ -571,7 +575,7 @@ extern s32 e1000e_set_fc_watermarks(struct e1000_hw *hw);
extern void e1000e_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop);
extern s32 e1000e_get_hw_semaphore(struct e1000_hw *hw);
extern s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data);
-extern void e1000e_config_collision_dist(struct e1000_hw *hw);
+extern void e1000e_config_collision_dist_generic(struct e1000_hw *hw);
extern s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw);
extern s32 e1000e_force_mac_fc(struct e1000_hw *hw);
extern s32 e1000e_blink_led_generic(struct e1000_hw *hw);
@@ -658,11 +662,6 @@ static inline s32 e1000_phy_hw_reset(struct e1000_hw *hw)
return hw->phy.ops.reset(hw);
}
-static inline s32 e1000_check_reset_block(struct e1000_hw *hw)
-{
- return hw->phy.ops.check_reset_block(hw);
-}
-
static inline s32 e1e_rphy(struct e1000_hw *hw, u32 offset, u16 *data)
{
return hw->phy.ops.read_reg(hw, offset, data);
@@ -685,7 +684,7 @@ extern s32 e1000e_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg);
extern s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
extern s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw);
extern void e1000e_release_nvm(struct e1000_hw *hw);
-extern void e1000e_reload_nvm(struct e1000_hw *hw);
+extern void e1000e_reload_nvm_generic(struct e1000_hw *hw);
extern s32 e1000_read_mac_addr_generic(struct e1000_hw *hw);
static inline s32 e1000e_read_mac_addr(struct e1000_hw *hw)
@@ -721,11 +720,6 @@ static inline s32 e1000_get_phy_info(struct e1000_hw *hw)
return hw->phy.ops.get_info(hw);
}
-static inline s32 e1000e_check_mng_mode(struct e1000_hw *hw)
-{
- return hw->mac.ops.check_mng_mode(hw);
-}
-
extern bool e1000e_check_mng_mode_generic(struct e1000_hw *hw);
extern bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw);
extern s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length);
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index fb2c28e799a2..db35dd5d96de 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -34,6 +34,7 @@
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/delay.h>
+#include <linux/vmalloc.h>
#include "e1000.h"
@@ -257,7 +258,7 @@ static int e1000_set_settings(struct net_device *netdev,
* When SoL/IDER sessions are active, autoneg/speed/duplex
* cannot be changed
*/
- if (e1000_check_reset_block(hw)) {
+ if (hw->phy.ops.check_reset_block(hw)) {
e_err("Cannot change link characteristics when SoL/IDER is "
"active.\n");
return -EINVAL;
@@ -536,7 +537,7 @@ static int e1000_set_eeprom(struct net_device *netdev,
ret_val = e1000_read_nvm(hw, first_word, 1, &eeprom_buff[0]);
ptr++;
}
- if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0))
+ if (((eeprom->offset + eeprom->len) & 1) && (!ret_val))
/* need read/modify/write of last changed EEPROM word */
/* only the first byte of the word is being modified */
ret_val = e1000_read_nvm(hw, last_word, 1,
@@ -552,7 +553,7 @@ static int e1000_set_eeprom(struct net_device *netdev,
memcpy(ptr, bytes, eeprom->len);
for (i = 0; i < last_word - first_word + 1; i++)
- eeprom_buff[i] = cpu_to_le16(eeprom_buff[i]);
+ cpu_to_le16s(&eeprom_buff[i]);
ret_val = e1000_write_nvm(hw, first_word,
last_word - first_word + 1, eeprom_buff);
@@ -605,94 +606,112 @@ static void e1000_get_ringparam(struct net_device *netdev,
struct ethtool_ringparam *ring)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_ring *tx_ring = adapter->tx_ring;
- struct e1000_ring *rx_ring = adapter->rx_ring;
ring->rx_max_pending = E1000_MAX_RXD;
ring->tx_max_pending = E1000_MAX_TXD;
- ring->rx_pending = rx_ring->count;
- ring->tx_pending = tx_ring->count;
+ ring->rx_pending = adapter->rx_ring_count;
+ ring->tx_pending = adapter->tx_ring_count;
}
static int e1000_set_ringparam(struct net_device *netdev,
struct ethtool_ringparam *ring)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_ring *tx_ring, *tx_old;
- struct e1000_ring *rx_ring, *rx_old;
- int err;
+ struct e1000_ring *temp_tx = NULL, *temp_rx = NULL;
+ int err = 0, size = sizeof(struct e1000_ring);
+ bool set_tx = false, set_rx = false;
+ u16 new_rx_count, new_tx_count;
if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
return -EINVAL;
- while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
- usleep_range(1000, 2000);
+ new_rx_count = clamp_t(u32, ring->rx_pending, E1000_MIN_RXD,
+ E1000_MAX_RXD);
+ new_rx_count = ALIGN(new_rx_count, REQ_RX_DESCRIPTOR_MULTIPLE);
- if (netif_running(adapter->netdev))
- e1000e_down(adapter);
+ new_tx_count = clamp_t(u32, ring->tx_pending, E1000_MIN_TXD,
+ E1000_MAX_TXD);
+ new_tx_count = ALIGN(new_tx_count, REQ_TX_DESCRIPTOR_MULTIPLE);
- tx_old = adapter->tx_ring;
- rx_old = adapter->rx_ring;
+ if ((new_tx_count == adapter->tx_ring_count) &&
+ (new_rx_count == adapter->rx_ring_count))
+ /* nothing to do */
+ return 0;
- err = -ENOMEM;
- tx_ring = kmemdup(tx_old, sizeof(struct e1000_ring), GFP_KERNEL);
- if (!tx_ring)
- goto err_alloc_tx;
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
+ usleep_range(1000, 2000);
- rx_ring = kmemdup(rx_old, sizeof(struct e1000_ring), GFP_KERNEL);
- if (!rx_ring)
- goto err_alloc_rx;
+ if (!netif_running(adapter->netdev)) {
+ /* Set counts now and allocate resources during open() */
+ adapter->tx_ring->count = new_tx_count;
+ adapter->rx_ring->count = new_rx_count;
+ adapter->tx_ring_count = new_tx_count;
+ adapter->rx_ring_count = new_rx_count;
+ goto clear_reset;
+ }
- adapter->tx_ring = tx_ring;
- adapter->rx_ring = rx_ring;
+ set_tx = (new_tx_count != adapter->tx_ring_count);
+ set_rx = (new_rx_count != adapter->rx_ring_count);
- rx_ring->count = max(ring->rx_pending, (u32)E1000_MIN_RXD);
- rx_ring->count = min(rx_ring->count, (u32)(E1000_MAX_RXD));
- rx_ring->count = ALIGN(rx_ring->count, REQ_RX_DESCRIPTOR_MULTIPLE);
+ /* Allocate temporary storage for ring updates */
+ if (set_tx) {
+ temp_tx = vmalloc(size);
+ if (!temp_tx) {
+ err = -ENOMEM;
+ goto free_temp;
+ }
+ }
+ if (set_rx) {
+ temp_rx = vmalloc(size);
+ if (!temp_rx) {
+ err = -ENOMEM;
+ goto free_temp;
+ }
+ }
- tx_ring->count = max(ring->tx_pending, (u32)E1000_MIN_TXD);
- tx_ring->count = min(tx_ring->count, (u32)(E1000_MAX_TXD));
- tx_ring->count = ALIGN(tx_ring->count, REQ_TX_DESCRIPTOR_MULTIPLE);
+ e1000e_down(adapter);
- if (netif_running(adapter->netdev)) {
- /* Try to get new resources before deleting old */
- err = e1000e_setup_rx_resources(adapter);
+ /*
+ * We can't just free everything and then setup again, because the
+ * ISRs in MSI-X mode get passed pointers to the Tx and Rx ring
+ * structs. First, attempt to allocate new resources...
+ */
+ if (set_tx) {
+ memcpy(temp_tx, adapter->tx_ring, size);
+ temp_tx->count = new_tx_count;
+ err = e1000e_setup_tx_resources(temp_tx);
if (err)
- goto err_setup_rx;
- err = e1000e_setup_tx_resources(adapter);
+ goto err_setup;
+ }
+ if (set_rx) {
+ memcpy(temp_rx, adapter->rx_ring, size);
+ temp_rx->count = new_rx_count;
+ err = e1000e_setup_rx_resources(temp_rx);
if (err)
- goto err_setup_tx;
+ goto err_setup_rx;
+ }
- /*
- * restore the old in order to free it,
- * then add in the new
- */
- adapter->rx_ring = rx_old;
- adapter->tx_ring = tx_old;
- e1000e_free_rx_resources(adapter);
- e1000e_free_tx_resources(adapter);
- kfree(tx_old);
- kfree(rx_old);
- adapter->rx_ring = rx_ring;
- adapter->tx_ring = tx_ring;
- err = e1000e_up(adapter);
- if (err)
- goto err_setup;
+ /* ...then free the old resources and copy back any new ring data */
+ if (set_tx) {
+ e1000e_free_tx_resources(adapter->tx_ring);
+ memcpy(adapter->tx_ring, temp_tx, size);
+ adapter->tx_ring_count = new_tx_count;
+ }
+ if (set_rx) {
+ e1000e_free_rx_resources(adapter->rx_ring);
+ memcpy(adapter->rx_ring, temp_rx, size);
+ adapter->rx_ring_count = new_rx_count;
}
- clear_bit(__E1000_RESETTING, &adapter->state);
- return 0;
-err_setup_tx:
- e1000e_free_rx_resources(adapter);
err_setup_rx:
- adapter->rx_ring = rx_old;
- adapter->tx_ring = tx_old;
- kfree(rx_ring);
-err_alloc_rx:
- kfree(tx_ring);
-err_alloc_tx:
- e1000e_up(adapter);
+ if (err && set_tx)
+ e1000e_free_tx_resources(temp_tx);
err_setup:
+ e1000e_up(adapter);
+free_temp:
+ vfree(temp_tx);
+ vfree(temp_rx);
+clear_reset:
clear_bit(__E1000_RESETTING, &adapter->state);
return err;
}
@@ -1069,7 +1088,7 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
tx_ring->buffer_info = kcalloc(tx_ring->count,
sizeof(struct e1000_buffer),
GFP_KERNEL);
- if (!(tx_ring->buffer_info)) {
+ if (!tx_ring->buffer_info) {
ret_val = 1;
goto err_nomem;
}
@@ -1131,7 +1150,7 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
rx_ring->buffer_info = kcalloc(rx_ring->count,
sizeof(struct e1000_buffer),
GFP_KERNEL);
- if (!(rx_ring->buffer_info)) {
+ if (!rx_ring->buffer_info) {
ret_val = 5;
goto err_nomem;
}
@@ -1579,11 +1598,13 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data)
{
+ struct e1000_hw *hw = &adapter->hw;
+
/*
* PHY loopback cannot be performed if SoL/IDER
* sessions are active
*/
- if (e1000_check_reset_block(&adapter->hw)) {
+ if (hw->phy.ops.check_reset_block(hw)) {
e_err("Cannot do PHY loopback test when SoL/IDER is active.\n");
*data = 0;
goto out;
@@ -1837,11 +1858,11 @@ static int e1000_set_phys_id(struct net_device *netdev,
break;
case ETHTOOL_ID_ON:
- adapter->hw.mac.ops.led_on(&adapter->hw);
+ hw->mac.ops.led_on(hw);
break;
case ETHTOOL_ID_OFF:
- adapter->hw.mac.ops.led_off(&adapter->hw);
+ hw->mac.ops.led_off(hw);
break;
}
return 0;
@@ -1955,6 +1976,53 @@ static void e1000_get_strings(struct net_device *netdev, u32 stringset,
}
}
+static int e1000_get_rxnfc(struct net_device *netdev,
+ struct ethtool_rxnfc *info, u32 *rule_locs)
+{
+ info->data = 0;
+
+ switch (info->cmd) {
+ case ETHTOOL_GRXFH: {
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 mrqc = er32(MRQC);
+
+ if (!(mrqc & E1000_MRQC_RSS_FIELD_MASK))
+ return 0;
+
+ switch (info->flow_type) {
+ case TCP_V4_FLOW:
+ if (mrqc & E1000_MRQC_RSS_FIELD_IPV4_TCP)
+ info->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
+ /* fall through */
+ case UDP_V4_FLOW:
+ case SCTP_V4_FLOW:
+ case AH_ESP_V4_FLOW:
+ case IPV4_FLOW:
+ if (mrqc & E1000_MRQC_RSS_FIELD_IPV4)
+ info->data |= RXH_IP_SRC | RXH_IP_DST;
+ break;
+ case TCP_V6_FLOW:
+ if (mrqc & E1000_MRQC_RSS_FIELD_IPV6_TCP)
+ info->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
+ /* fall through */
+ case UDP_V6_FLOW:
+ case SCTP_V6_FLOW:
+ case AH_ESP_V6_FLOW:
+ case IPV6_FLOW:
+ if (mrqc & E1000_MRQC_RSS_FIELD_IPV6)
+ info->data |= RXH_IP_SRC | RXH_IP_DST;
+ break;
+ default:
+ break;
+ }
+ return 0;
+ }
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
static const struct ethtool_ops e1000_ethtool_ops = {
.get_settings = e1000_get_settings,
.set_settings = e1000_set_settings,
@@ -1981,6 +2049,7 @@ static const struct ethtool_ops e1000_ethtool_ops = {
.get_sset_count = e1000e_get_sset_count,
.get_coalesce = e1000_get_coalesce,
.set_coalesce = e1000_set_coalesce,
+ .get_rxnfc = e1000_get_rxnfc,
};
void e1000e_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h
index 29670397079b..f82ecf536c8b 100644
--- a/drivers/net/ethernet/intel/e1000e/hw.h
+++ b/drivers/net/ethernet/intel/e1000e/hw.h
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -204,6 +204,7 @@ enum e1e_registers {
E1000_WUC = 0x05800, /* Wakeup Control - RW */
E1000_WUFC = 0x05808, /* Wakeup Filter Control - RW */
E1000_WUS = 0x05810, /* Wakeup Status - RO */
+ E1000_MRQC = 0x05818, /* Multiple Receive Control - RW */
E1000_MANC = 0x05820, /* Management Control - RW */
E1000_FFLT = 0x05F00, /* Flexible Filter Length Table - RW Array */
E1000_HOST_IF = 0x08800, /* Host Interface */
@@ -219,6 +220,10 @@ enum e1e_registers {
E1000_SWSM = 0x05B50, /* SW Semaphore */
E1000_FWSM = 0x05B54, /* FW Semaphore */
E1000_SWSM2 = 0x05B58, /* Driver-only SW semaphore */
+ E1000_RETA_BASE = 0x05C00, /* Redirection Table - RW */
+#define E1000_RETA(_n) (E1000_RETA_BASE + ((_n) * 4))
+ E1000_RSSRK_BASE = 0x05C80, /* RSS Random Key - RW */
+#define E1000_RSSRK(_n) (E1000_RSSRK_BASE + ((_n) * 4))
E1000_FFLT_DBG = 0x05F04, /* Debug Register */
E1000_PCH_RAICC_BASE = 0x05F50, /* Receive Address Initial CRC */
#define E1000_PCH_RAICC(_n) (E1000_PCH_RAICC_BASE + ((_n) * 4))
@@ -776,6 +781,7 @@ struct e1000_mac_operations {
s32 (*setup_physical_interface)(struct e1000_hw *);
s32 (*setup_led)(struct e1000_hw *);
void (*write_vfta)(struct e1000_hw *, u32, u32);
+ void (*config_collision_dist)(struct e1000_hw *);
s32 (*read_mac_addr)(struct e1000_hw *);
};
@@ -824,6 +830,7 @@ struct e1000_nvm_operations {
s32 (*acquire)(struct e1000_hw *);
s32 (*read)(struct e1000_hw *, u16, u16, u16 *);
void (*release)(struct e1000_hw *);
+ void (*reload)(struct e1000_hw *);
s32 (*update)(struct e1000_hw *);
s32 (*valid_led_default)(struct e1000_hw *, u16 *);
s32 (*validate)(struct e1000_hw *);
@@ -964,8 +971,8 @@ struct e1000_dev_spec_ich8lan {
struct e1000_hw {
struct e1000_adapter *adapter;
- u8 __iomem *hw_addr;
- u8 __iomem *flash_address;
+ void __iomem *hw_addr;
+ void __iomem *flash_address;
struct e1000_mac_info mac;
struct e1000_fc_info fc;
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index e2a80a283fd3..64c76443a7aa 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -145,6 +145,8 @@
#define I82579_EMI_ADDR 0x10
#define I82579_EMI_DATA 0x11
#define I82579_LPI_UPDATE_TIMER 0x4805 /* in 40ns units + 40 ns base value */
+#define I82579_MSE_THRESHOLD 0x084F /* Mean Square Error Threshold */
+#define I82579_MSE_LINK_DOWN 0x2411 /* MSE count before dropping link */
/* Strapping Option Register - RO */
#define E1000_STRAP 0x0000C
@@ -278,8 +280,8 @@ static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val)
#define er16flash(reg) __er16flash(hw, (reg))
#define er32flash(reg) __er32flash(hw, (reg))
-#define ew16flash(reg,val) __ew16flash(hw, (reg), (val))
-#define ew32flash(reg,val) __ew32flash(hw, (reg), (val))
+#define ew16flash(reg, val) __ew16flash(hw, (reg), (val))
+#define ew32flash(reg, val) __ew32flash(hw, (reg), (val))
static void e1000_toggle_lanphypc_value_ich8lan(struct e1000_hw *hw)
{
@@ -304,7 +306,6 @@ static void e1000_toggle_lanphypc_value_ich8lan(struct e1000_hw *hw)
static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
{
struct e1000_phy_info *phy = &hw->phy;
- u32 fwsm;
s32 ret_val = 0;
phy->addr = 1;
@@ -323,14 +324,14 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
phy->ops.power_down = e1000_power_down_phy_copper_ich8lan;
phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
- /*
- * The MAC-PHY interconnect may still be in SMBus mode
- * after Sx->S0. If the manageability engine (ME) is
- * disabled, then toggle the LANPHYPC Value bit to force
- * the interconnect to PCIe mode.
- */
- fwsm = er32(FWSM);
- if (!(fwsm & E1000_ICH_FWSM_FW_VALID) && !e1000_check_reset_block(hw)) {
+ if (!hw->phy.ops.check_reset_block(hw)) {
+ u32 fwsm = er32(FWSM);
+
+ /*
+ * The MAC-PHY interconnect may still be in SMBus mode after
+ * Sx->S0. If resetting the PHY is not blocked, toggle the
+ * LANPHYPC Value bit to force the interconnect to PCIe mode.
+ */
e1000_toggle_lanphypc_value_ich8lan(hw);
msleep(50);
@@ -338,25 +339,26 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
* Gate automatic PHY configuration by hardware on
* non-managed 82579
*/
- if (hw->mac.type == e1000_pch2lan)
+ if ((hw->mac.type == e1000_pch2lan) &&
+ !(fwsm & E1000_ICH_FWSM_FW_VALID))
e1000_gate_hw_phy_config_ich8lan(hw, true);
- }
- /*
- * Reset the PHY before any access to it. Doing so, ensures that
- * the PHY is in a known good state before we read/write PHY registers.
- * The generic reset is sufficient here, because we haven't determined
- * the PHY type yet.
- */
- ret_val = e1000e_phy_hw_reset_generic(hw);
- if (ret_val)
- goto out;
+ /*
+ * Reset the PHY before any access to it. Doing so, ensures
+ * that the PHY is in a known good state before we read/write
+ * PHY registers. The generic reset is sufficient here,
+ * because we haven't determined the PHY type yet.
+ */
+ ret_val = e1000e_phy_hw_reset_generic(hw);
+ if (ret_val)
+ return ret_val;
- /* Ungate automatic PHY configuration on non-managed 82579 */
- if ((hw->mac.type == e1000_pch2lan) &&
- !(fwsm & E1000_ICH_FWSM_FW_VALID)) {
- usleep_range(10000, 20000);
- e1000_gate_hw_phy_config_ich8lan(hw, false);
+ /* Ungate automatic PHY configuration on non-managed 82579 */
+ if ((hw->mac.type == e1000_pch2lan) &&
+ !(fwsm & E1000_ICH_FWSM_FW_VALID)) {
+ usleep_range(10000, 20000);
+ e1000_gate_hw_phy_config_ich8lan(hw, false);
+ }
}
phy->id = e1000_phy_unknown;
@@ -364,7 +366,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
default:
ret_val = e1000e_get_phy_id(hw);
if (ret_val)
- goto out;
+ return ret_val;
if ((phy->id != 0) && (phy->id != PHY_REVISION_MASK))
break;
/* fall-through */
@@ -375,10 +377,10 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
*/
ret_val = e1000_set_mdio_slow_mode_hv(hw);
if (ret_val)
- goto out;
+ return ret_val;
ret_val = e1000e_get_phy_id(hw);
if (ret_val)
- goto out;
+ return ret_val;
break;
}
phy->type = e1000e_get_phy_type_from_id(phy->id);
@@ -404,7 +406,6 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
break;
}
-out:
return ret_val;
}
@@ -551,9 +552,8 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw)
* Initialize family-specific MAC parameters and function
* pointers.
**/
-static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter)
+static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw)
{
- struct e1000_hw *hw = &adapter->hw;
struct e1000_mac_info *mac = &hw->mac;
/* Set media type function pointer */
@@ -580,7 +580,7 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter)
/* check management mode */
mac->ops.check_mng_mode = e1000_check_mng_mode_ich8lan;
/* ID LED init */
- mac->ops.id_led_init = e1000e_id_led_init;
+ mac->ops.id_led_init = e1000e_id_led_init_generic;
/* blink LED */
mac->ops.blink_led = e1000e_blink_led_generic;
/* setup LED */
@@ -634,20 +634,18 @@ static s32 e1000_set_eee_pchlan(struct e1000_hw *hw)
u16 phy_reg;
if (hw->phy.type != e1000_phy_82579)
- goto out;
+ return 0;
ret_val = e1e_rphy(hw, I82579_LPI_CTRL, &phy_reg);
if (ret_val)
- goto out;
+ return ret_val;
if (hw->dev_spec.ich8lan.eee_disable)
phy_reg &= ~I82579_LPI_CTRL_ENABLE_MASK;
else
phy_reg |= I82579_LPI_CTRL_ENABLE_MASK;
- ret_val = e1e_wphy(hw, I82579_LPI_CTRL, phy_reg);
-out:
- return ret_val;
+ return e1e_wphy(hw, I82579_LPI_CTRL, phy_reg);
}
/**
@@ -671,10 +669,8 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
* get_link_status flag is set upon receiving a Link Status
* Change or Rx Sequence Error interrupt.
*/
- if (!mac->get_link_status) {
- ret_val = 0;
- goto out;
- }
+ if (!mac->get_link_status)
+ return 0;
/*
* First we want to see if the MII Status Register reports
@@ -683,16 +679,16 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
*/
ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
if (ret_val)
- goto out;
+ return ret_val;
if (hw->mac.type == e1000_pchlan) {
ret_val = e1000_k1_gig_workaround_hv(hw, link);
if (ret_val)
- goto out;
+ return ret_val;
}
if (!link)
- goto out; /* No link detected */
+ return 0; /* No link detected */
mac->get_link_status = false;
@@ -700,13 +696,13 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
case e1000_pch2lan:
ret_val = e1000_k1_workaround_lv(hw);
if (ret_val)
- goto out;
+ return ret_val;
/* fall-thru */
case e1000_pchlan:
if (hw->phy.type == e1000_phy_82578) {
ret_val = e1000_link_stall_workaround_hv(hw);
if (ret_val)
- goto out;
+ return ret_val;
}
/*
@@ -736,23 +732,21 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
/* Enable/Disable EEE after link up */
ret_val = e1000_set_eee_pchlan(hw);
if (ret_val)
- goto out;
+ return ret_val;
/*
* If we are forcing speed/duplex, then we simply return since
* we have already determined whether we have link or not.
*/
- if (!mac->autoneg) {
- ret_val = -E1000_ERR_CONFIG;
- goto out;
- }
+ if (!mac->autoneg)
+ return -E1000_ERR_CONFIG;
/*
* Auto-Neg is enabled. Auto Speed Detection takes care
* of MAC speed/duplex configuration. So we only need to
* configure Collision Distance in the MAC.
*/
- e1000e_config_collision_dist(hw);
+ mac->ops.config_collision_dist(hw);
/*
* Configure Flow Control now that Auto-Neg has completed.
@@ -764,7 +758,6 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
if (ret_val)
e_dbg("Error configuring flow control\n");
-out:
return ret_val;
}
@@ -773,7 +766,7 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
struct e1000_hw *hw = &adapter->hw;
s32 rc;
- rc = e1000_init_mac_params_ich8lan(adapter);
+ rc = e1000_init_mac_params_ich8lan(hw);
if (rc)
return rc;
@@ -900,8 +893,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
}
if (!timeout) {
- e_dbg("Failed to acquire the semaphore, FW or HW has it: "
- "FWSM=0x%8.8x EXTCNF_CTRL=0x%8.8x)\n",
+ e_dbg("Failed to acquire the semaphore, FW or HW has it: FWSM=0x%8.8x EXTCNF_CTRL=0x%8.8x)\n",
er32(FWSM), extcnf_ctrl);
extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
ew32(EXTCNF_CTRL, extcnf_ctrl);
@@ -1008,15 +1000,13 @@ static s32 e1000_write_smbus_addr(struct e1000_hw *hw)
ret_val = e1000_read_phy_reg_hv_locked(hw, HV_SMB_ADDR, &phy_data);
if (ret_val)
- goto out;
+ return ret_val;
phy_data &= ~HV_SMB_ADDR_MASK;
phy_data |= (strap >> E1000_STRAP_SMBUS_ADDRESS_SHIFT);
phy_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID;
- ret_val = e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR, phy_data);
-out:
- return ret_val;
+ return e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR, phy_data);
}
/**
@@ -1065,7 +1055,7 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
data = er32(FEXTNVM);
if (!(data & sw_cfg_mask))
- goto out;
+ goto release;
/*
* Make sure HW does not configure LCD from PHY
@@ -1074,14 +1064,14 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
data = er32(EXTCNF_CTRL);
if (!(hw->mac.type == e1000_pch2lan)) {
if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE)
- goto out;
+ goto release;
}
cnf_size = er32(EXTCNF_SIZE);
cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK;
cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT;
if (!cnf_size)
- goto out;
+ goto release;
cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK;
cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT;
@@ -1097,13 +1087,13 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
*/
ret_val = e1000_write_smbus_addr(hw);
if (ret_val)
- goto out;
+ goto release;
data = er32(LEDCTL);
ret_val = e1000_write_phy_reg_hv_locked(hw, HV_LED_CONFIG,
(u16)data);
if (ret_val)
- goto out;
+ goto release;
}
/* Configure LCD from extended configuration region. */
@@ -1115,12 +1105,12 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
ret_val = e1000_read_nvm(hw, (word_addr + i * 2), 1,
&reg_data);
if (ret_val)
- goto out;
+ goto release;
ret_val = e1000_read_nvm(hw, (word_addr + i * 2 + 1),
1, &reg_addr);
if (ret_val)
- goto out;
+ goto release;
/* Save off the PHY page for future writes. */
if (reg_addr == IGP01E1000_PHY_PAGE_SELECT) {
@@ -1134,10 +1124,10 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
ret_val = phy->ops.write_reg_locked(hw, (u32)reg_addr,
reg_data);
if (ret_val)
- goto out;
+ goto release;
}
-out:
+release:
hw->phy.ops.release(hw);
return ret_val;
}
@@ -1159,12 +1149,12 @@ static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link)
bool k1_enable = hw->dev_spec.ich8lan.nvm_k1_enabled;
if (hw->mac.type != e1000_pchlan)
- goto out;
+ return 0;
/* Wrap the whole flow with the sw flag */
ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
- goto out;
+ return ret_val;
/* Disable K1 when link is 1Gbps, otherwise use the NVM setting */
if (link) {
@@ -1218,7 +1208,7 @@ static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link)
release:
hw->phy.ops.release(hw);
-out:
+
return ret_val;
}
@@ -1240,22 +1230,20 @@ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
u32 reg = 0;
u16 kmrn_reg = 0;
- ret_val = e1000e_read_kmrn_reg_locked(hw,
- E1000_KMRNCTRLSTA_K1_CONFIG,
- &kmrn_reg);
+ ret_val = e1000e_read_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG,
+ &kmrn_reg);
if (ret_val)
- goto out;
+ return ret_val;
if (k1_enable)
kmrn_reg |= E1000_KMRNCTRLSTA_K1_ENABLE;
else
kmrn_reg &= ~E1000_KMRNCTRLSTA_K1_ENABLE;
- ret_val = e1000e_write_kmrn_reg_locked(hw,
- E1000_KMRNCTRLSTA_K1_CONFIG,
- kmrn_reg);
+ ret_val = e1000e_write_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG,
+ kmrn_reg);
if (ret_val)
- goto out;
+ return ret_val;
udelay(20);
ctrl_ext = er32(CTRL_EXT);
@@ -1273,8 +1261,7 @@ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
e1e_flush();
udelay(20);
-out:
- return ret_val;
+ return 0;
}
/**
@@ -1302,18 +1289,18 @@ static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state)
if (!(hw->mac.type == e1000_pch2lan)) {
mac_reg = er32(EXTCNF_CTRL);
if (mac_reg & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE)
- goto out;
+ goto release;
}
mac_reg = er32(FEXTNVM);
if (!(mac_reg & E1000_FEXTNVM_SW_CONFIG_ICH8M))
- goto out;
+ goto release;
mac_reg = er32(PHY_CTRL);
ret_val = hw->phy.ops.read_reg_locked(hw, HV_OEM_BITS, &oem_reg);
if (ret_val)
- goto out;
+ goto release;
oem_reg &= ~(HV_OEM_BITS_GBE_DIS | HV_OEM_BITS_LPLU);
@@ -1325,7 +1312,7 @@ static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state)
oem_reg |= HV_OEM_BITS_LPLU;
/* Set Restart auto-neg to activate the bits */
- if (!e1000_check_reset_block(hw))
+ if (!hw->phy.ops.check_reset_block(hw))
oem_reg |= HV_OEM_BITS_RESTART_AN;
} else {
if (mac_reg & (E1000_PHY_CTRL_GBE_DISABLE |
@@ -1339,7 +1326,7 @@ static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state)
ret_val = hw->phy.ops.write_reg_locked(hw, HV_OEM_BITS, oem_reg);
-out:
+release:
hw->phy.ops.release(hw);
return ret_val;
@@ -1376,13 +1363,13 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
u16 phy_data;
if (hw->mac.type != e1000_pchlan)
- return ret_val;
+ return 0;
/* Set MDIO slow mode before any other MDIO access */
if (hw->phy.type == e1000_phy_82577) {
ret_val = e1000_set_mdio_slow_mode_hv(hw);
if (ret_val)
- goto out;
+ return ret_val;
}
if (((hw->phy.type == e1000_phy_82577) &&
@@ -1419,7 +1406,7 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0);
hw->phy.ops.release(hw);
if (ret_val)
- goto out;
+ return ret_val;
/*
* Configure the K1 Si workaround during phy reset assuming there is
@@ -1427,12 +1414,12 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
*/
ret_val = e1000_k1_gig_workaround_hv(hw, true);
if (ret_val)
- goto out;
+ return ret_val;
/* Workaround for link disconnects on a busy hub in half duplex */
ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
- goto out;
+ return ret_val;
ret_val = hw->phy.ops.read_reg_locked(hw, BM_PORT_GEN_CFG, &phy_data);
if (ret_val)
goto release;
@@ -1440,7 +1427,7 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
phy_data & 0x00FF);
release:
hw->phy.ops.release(hw);
-out:
+
return ret_val;
}
@@ -1497,13 +1484,13 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable)
u16 i;
if (hw->mac.type != e1000_pch2lan)
- goto out;
+ return 0;
/* disable Rx path while enabling/disabling workaround */
e1e_rphy(hw, PHY_REG(769, 20), &phy_reg);
ret_val = e1e_wphy(hw, PHY_REG(769, 20), phy_reg | (1 << 14));
if (ret_val)
- goto out;
+ return ret_val;
if (enable) {
/*
@@ -1545,24 +1532,24 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable)
E1000_KMRNCTRLSTA_CTRL_OFFSET,
&data);
if (ret_val)
- goto out;
+ return ret_val;
ret_val = e1000e_write_kmrn_reg(hw,
E1000_KMRNCTRLSTA_CTRL_OFFSET,
data | (1 << 0));
if (ret_val)
- goto out;
+ return ret_val;
ret_val = e1000e_read_kmrn_reg(hw,
E1000_KMRNCTRLSTA_HD_CTRL,
&data);
if (ret_val)
- goto out;
+ return ret_val;
data &= ~(0xF << 8);
data |= (0xB << 8);
ret_val = e1000e_write_kmrn_reg(hw,
E1000_KMRNCTRLSTA_HD_CTRL,
data);
if (ret_val)
- goto out;
+ return ret_val;
/* Enable jumbo frame workaround in the PHY */
e1e_rphy(hw, PHY_REG(769, 23), &data);
@@ -1570,25 +1557,25 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable)
data |= (0x37 << 5);
ret_val = e1e_wphy(hw, PHY_REG(769, 23), data);
if (ret_val)
- goto out;
+ return ret_val;
e1e_rphy(hw, PHY_REG(769, 16), &data);
data &= ~(1 << 13);
ret_val = e1e_wphy(hw, PHY_REG(769, 16), data);
if (ret_val)
- goto out;
+ return ret_val;
e1e_rphy(hw, PHY_REG(776, 20), &data);
data &= ~(0x3FF << 2);
data |= (0x1A << 2);
ret_val = e1e_wphy(hw, PHY_REG(776, 20), data);
if (ret_val)
- goto out;
+ return ret_val;
ret_val = e1e_wphy(hw, PHY_REG(776, 23), 0xF100);
if (ret_val)
- goto out;
+ return ret_val;
e1e_rphy(hw, HV_PM_CTRL, &data);
ret_val = e1e_wphy(hw, HV_PM_CTRL, data | (1 << 10));
if (ret_val)
- goto out;
+ return ret_val;
} else {
/* Write MAC register values back to h/w defaults */
mac_reg = er32(FFLT_DBG);
@@ -1603,56 +1590,53 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable)
E1000_KMRNCTRLSTA_CTRL_OFFSET,
&data);
if (ret_val)
- goto out;
+ return ret_val;
ret_val = e1000e_write_kmrn_reg(hw,
E1000_KMRNCTRLSTA_CTRL_OFFSET,
data & ~(1 << 0));
if (ret_val)
- goto out;
+ return ret_val;
ret_val = e1000e_read_kmrn_reg(hw,
E1000_KMRNCTRLSTA_HD_CTRL,
&data);
if (ret_val)
- goto out;
+ return ret_val;
data &= ~(0xF << 8);
data |= (0xB << 8);
ret_val = e1000e_write_kmrn_reg(hw,
E1000_KMRNCTRLSTA_HD_CTRL,
data);
if (ret_val)
- goto out;
+ return ret_val;
/* Write PHY register values back to h/w defaults */
e1e_rphy(hw, PHY_REG(769, 23), &data);
data &= ~(0x7F << 5);
ret_val = e1e_wphy(hw, PHY_REG(769, 23), data);
if (ret_val)
- goto out;
+ return ret_val;
e1e_rphy(hw, PHY_REG(769, 16), &data);
data |= (1 << 13);
ret_val = e1e_wphy(hw, PHY_REG(769, 16), data);
if (ret_val)
- goto out;
+ return ret_val;
e1e_rphy(hw, PHY_REG(776, 20), &data);
data &= ~(0x3FF << 2);
data |= (0x8 << 2);
ret_val = e1e_wphy(hw, PHY_REG(776, 20), data);
if (ret_val)
- goto out;
+ return ret_val;
ret_val = e1e_wphy(hw, PHY_REG(776, 23), 0x7E00);
if (ret_val)
- goto out;
+ return ret_val;
e1e_rphy(hw, HV_PM_CTRL, &data);
ret_val = e1e_wphy(hw, HV_PM_CTRL, data & ~(1 << 10));
if (ret_val)
- goto out;
+ return ret_val;
}
/* re-enable Rx path after enabling/disabling workaround */
- ret_val = e1e_wphy(hw, PHY_REG(769, 20), phy_reg & ~(1 << 14));
-
-out:
- return ret_val;
+ return e1e_wphy(hw, PHY_REG(769, 20), phy_reg & ~(1 << 14));
}
/**
@@ -1664,12 +1648,31 @@ static s32 e1000_lv_phy_workarounds_ich8lan(struct e1000_hw *hw)
s32 ret_val = 0;
if (hw->mac.type != e1000_pch2lan)
- goto out;
+ return 0;
/* Set MDIO slow mode before any other MDIO access */
ret_val = e1000_set_mdio_slow_mode_hv(hw);
-out:
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ return ret_val;
+ ret_val = hw->phy.ops.write_reg_locked(hw, I82579_EMI_ADDR,
+ I82579_MSE_THRESHOLD);
+ if (ret_val)
+ goto release;
+ /* set MSE higher to enable link to stay up when noise is high */
+ ret_val = hw->phy.ops.write_reg_locked(hw, I82579_EMI_DATA, 0x0034);
+ if (ret_val)
+ goto release;
+ ret_val = hw->phy.ops.write_reg_locked(hw, I82579_EMI_ADDR,
+ I82579_MSE_LINK_DOWN);
+ if (ret_val)
+ goto release;
+ /* drop link after 5 times MSE threshold was reached */
+ ret_val = hw->phy.ops.write_reg_locked(hw, I82579_EMI_DATA, 0x0005);
+release:
+ hw->phy.ops.release(hw);
+
return ret_val;
}
@@ -1687,12 +1690,12 @@ static s32 e1000_k1_workaround_lv(struct e1000_hw *hw)
u16 phy_reg;
if (hw->mac.type != e1000_pch2lan)
- goto out;
+ return 0;
/* Set K1 beacon duration based on 1Gbps speed or otherwise */
ret_val = e1e_rphy(hw, HV_M_STATUS, &status_reg);
if (ret_val)
- goto out;
+ return ret_val;
if ((status_reg & (HV_M_STATUS_LINK_UP | HV_M_STATUS_AUTONEG_COMPLETE))
== (HV_M_STATUS_LINK_UP | HV_M_STATUS_AUTONEG_COMPLETE)) {
@@ -1701,7 +1704,7 @@ static s32 e1000_k1_workaround_lv(struct e1000_hw *hw)
ret_val = e1e_rphy(hw, I82579_LPI_CTRL, &phy_reg);
if (ret_val)
- goto out;
+ return ret_val;
if (status_reg & HV_M_STATUS_SPEED_1000) {
mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_8USEC;
@@ -1714,7 +1717,6 @@ static s32 e1000_k1_workaround_lv(struct e1000_hw *hw)
ret_val = e1e_wphy(hw, I82579_LPI_CTRL, phy_reg);
}
-out:
return ret_val;
}
@@ -1741,7 +1743,6 @@ static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate)
extcnf_ctrl &= ~E1000_EXTCNF_CTRL_GATE_PHY_CFG;
ew32(EXTCNF_CTRL, extcnf_ctrl);
- return;
}
/**
@@ -1785,8 +1786,8 @@ static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw)
s32 ret_val = 0;
u16 reg;
- if (e1000_check_reset_block(hw))
- goto out;
+ if (hw->phy.ops.check_reset_block(hw))
+ return 0;
/* Allow time for h/w to get to quiescent state after reset */
usleep_range(10000, 20000);
@@ -1796,12 +1797,12 @@ static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw)
case e1000_pchlan:
ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
if (ret_val)
- goto out;
+ return ret_val;
break;
case e1000_pch2lan:
ret_val = e1000_lv_phy_workarounds_ich8lan(hw);
if (ret_val)
- goto out;
+ return ret_val;
break;
default:
break;
@@ -1817,7 +1818,7 @@ static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw)
/* Configure the LCD with the extended configuration region in NVM */
ret_val = e1000_sw_lcd_config_ich8lan(hw);
if (ret_val)
- goto out;
+ return ret_val;
/* Configure the LCD with the OEM bits in NVM */
ret_val = e1000_oem_bits_config_ich8lan(hw, true);
@@ -1832,18 +1833,16 @@ static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw)
/* Set EEE LPI Update Timer to 200usec */
ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
- goto out;
+ return ret_val;
ret_val = hw->phy.ops.write_reg_locked(hw, I82579_EMI_ADDR,
I82579_LPI_UPDATE_TIMER);
- if (ret_val)
- goto release;
- ret_val = hw->phy.ops.write_reg_locked(hw, I82579_EMI_DATA,
- 0x1387);
-release:
+ if (!ret_val)
+ ret_val = hw->phy.ops.write_reg_locked(hw,
+ I82579_EMI_DATA,
+ 0x1387);
hw->phy.ops.release(hw);
}
-out:
return ret_val;
}
@@ -1866,12 +1865,9 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
ret_val = e1000e_phy_hw_reset_generic(hw);
if (ret_val)
- goto out;
-
- ret_val = e1000_post_phy_reset_ich8lan(hw);
+ return ret_val;
-out:
- return ret_val;
+ return e1000_post_phy_reset_ich8lan(hw);
}
/**
@@ -1892,18 +1888,17 @@ static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active)
ret_val = e1e_rphy(hw, HV_OEM_BITS, &oem_reg);
if (ret_val)
- goto out;
+ return ret_val;
if (active)
oem_reg |= HV_OEM_BITS_LPLU;
else
oem_reg &= ~HV_OEM_BITS_LPLU;
- oem_reg |= HV_OEM_BITS_RESTART_AN;
- ret_val = e1e_wphy(hw, HV_OEM_BITS, oem_reg);
+ if (!hw->phy.ops.check_reset_block(hw))
+ oem_reg |= HV_OEM_BITS_RESTART_AN;
-out:
- return ret_val;
+ return e1e_wphy(hw, HV_OEM_BITS, oem_reg);
}
/**
@@ -1927,7 +1922,7 @@ static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
u16 data;
if (phy->type == e1000_phy_ife)
- return ret_val;
+ return 0;
phy_ctrl = er32(PHY_CTRL);
@@ -2009,7 +2004,7 @@ static s32 e1000_set_d3_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
{
struct e1000_phy_info *phy = &hw->phy;
u32 phy_ctrl;
- s32 ret_val;
+ s32 ret_val = 0;
u16 data;
phy_ctrl = er32(PHY_CTRL);
@@ -2075,7 +2070,7 @@ static s32 e1000_set_d3_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data);
}
- return 0;
+ return ret_val;
}
/**
@@ -2093,7 +2088,7 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank)
u32 bank1_offset = nvm->flash_bank_size * sizeof(u16);
u32 act_offset = E1000_ICH_NVM_SIG_WORD * 2 + 1;
u8 sig_byte = 0;
- s32 ret_val = 0;
+ s32 ret_val;
switch (hw->mac.type) {
case e1000_ich8lan:
@@ -2108,8 +2103,7 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank)
return 0;
}
- e_dbg("Unable to determine valid NVM bank via EEC - "
- "reading flash signature\n");
+ e_dbg("Unable to determine valid NVM bank via EEC - reading flash signature\n");
/* fall-thru */
default:
/* set bank to 0 in case flash read fails */
@@ -2141,8 +2135,6 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank)
e_dbg("ERROR: No valid NVM bank present\n");
return -E1000_ERR_NVM;
}
-
- return 0;
}
/**
@@ -2221,8 +2213,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw)
/* Check if the flash descriptor is valid */
if (hsfsts.hsf_status.fldesvalid == 0) {
- e_dbg("Flash descriptor invalid. "
- "SW Sequencing must be used.\n");
+ e_dbg("Flash descriptor invalid. SW Sequencing must be used.\n");
return -E1000_ERR_NVM;
}
@@ -2251,21 +2242,21 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw)
ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval);
ret_val = 0;
} else {
- s32 i = 0;
+ s32 i;
/*
* Otherwise poll for sometime so the current
* cycle has a chance to end before giving up.
*/
for (i = 0; i < ICH_FLASH_READ_COMMAND_TIMEOUT; i++) {
- hsfsts.regval = __er16flash(hw, ICH_FLASH_HSFSTS);
+ hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
if (hsfsts.hsf_status.flcinprog == 0) {
ret_val = 0;
break;
}
udelay(1);
}
- if (ret_val == 0) {
+ if (!ret_val) {
/*
* Successful in waiting for previous cycle to timeout,
* now set the Flash Cycle Done.
@@ -2291,7 +2282,6 @@ static s32 e1000_flash_cycle_ich8lan(struct e1000_hw *hw, u32 timeout)
{
union ich8_hws_flash_ctrl hsflctl;
union ich8_hws_flash_status hsfsts;
- s32 ret_val = -E1000_ERR_NVM;
u32 i = 0;
/* Start a cycle by writing 1 in Flash Cycle Go in Hw Flash Control */
@@ -2310,7 +2300,7 @@ static s32 e1000_flash_cycle_ich8lan(struct e1000_hw *hw, u32 timeout)
if (hsfsts.hsf_status.flcdone == 1 && hsfsts.hsf_status.flcerr == 0)
return 0;
- return ret_val;
+ return -E1000_ERR_NVM;
}
/**
@@ -2383,7 +2373,7 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
udelay(1);
/* Steps */
ret_val = e1000_flash_cycle_init_ich8lan(hw);
- if (ret_val != 0)
+ if (ret_val)
break;
hsflctl.regval = er16flash(ICH_FLASH_HSFCTL);
@@ -2403,7 +2393,7 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
* read in (shift in) the Flash Data0, the order is
* least significant byte first msb to lsb
*/
- if (ret_val == 0) {
+ if (!ret_val) {
flash_data = er32flash(ICH_FLASH_FDATA0);
if (size == 1)
*data = (u8)(flash_data & 0x000000FF);
@@ -2422,8 +2412,7 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
/* Repeat for some time before giving up. */
continue;
} else if (hsfsts.hsf_status.flcdone == 0) {
- e_dbg("Timeout error - flash cycle "
- "did not complete.\n");
+ e_dbg("Timeout error - flash cycle did not complete.\n");
break;
}
}
@@ -2618,7 +2607,7 @@ release:
* until after the next adapter reset.
*/
if (!ret_val) {
- e1000e_reload_nvm(hw);
+ nvm->ops.reload(hw);
usleep_range(10000, 20000);
}
@@ -2774,8 +2763,7 @@ static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
/* Repeat for some time before giving up. */
continue;
if (hsfsts.hsf_status.flcdone == 0) {
- e_dbg("Timeout error - flash cycle "
- "did not complete.");
+ e_dbg("Timeout error - flash cycle did not complete.\n");
break;
}
} while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT);
@@ -2917,7 +2905,7 @@ static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank)
ret_val = e1000_flash_cycle_ich8lan(hw,
ICH_FLASH_ERASE_COMMAND_TIMEOUT);
- if (ret_val == 0)
+ if (!ret_val)
break;
/*
@@ -2972,7 +2960,7 @@ static s32 e1000_valid_led_default_ich8lan(struct e1000_hw *hw, u16 *data)
*
* PCH also does not have an "always on" or "always off" mode which
* complicates the ID feature. Instead of using the "on" mode to indicate
- * in ledctl_mode2 the LEDs to use for ID (see e1000e_id_led_init()),
+ * in ledctl_mode2 the LEDs to use for ID (see e1000e_id_led_init_generic()),
* use "link_up" mode. The LEDs will still ID on request if there is no
* link based on logic in e1000_led_[on|off]_pchlan().
**/
@@ -2987,7 +2975,7 @@ static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw)
/* Get default ID LED modes */
ret_val = hw->nvm.ops.valid_led_default(hw, &data);
if (ret_val)
- goto out;
+ return ret_val;
mac->ledctl_default = er32(LEDCTL);
mac->ledctl_mode1 = mac->ledctl_default;
@@ -3032,8 +3020,7 @@ static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw)
}
}
-out:
- return ret_val;
+ return 0;
}
/**
@@ -3120,7 +3107,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
ctrl = er32(CTRL);
- if (!e1000_check_reset_block(hw)) {
+ if (!hw->phy.ops.check_reset_block(hw)) {
/*
* Full-chip reset requires MAC and PHY reset at the same
* time to make sure the interface between MAC and the
@@ -3148,11 +3135,11 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
if (ctrl & E1000_CTRL_PHY_RST) {
ret_val = hw->phy.ops.get_cfg_done(hw);
if (ret_val)
- goto out;
+ return ret_val;
ret_val = e1000_post_phy_reset_ich8lan(hw);
if (ret_val)
- goto out;
+ return ret_val;
}
/*
@@ -3170,8 +3157,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
kab |= E1000_KABGTXD_BGSQLBIAS;
ew32(KABGTXD, kab);
-out:
- return ret_val;
+ return 0;
}
/**
@@ -3224,7 +3210,7 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
}
/* Setup link and flow control */
- ret_val = e1000_setup_link_ich8lan(hw);
+ ret_val = mac->ops.setup_link(hw);
/* Set the transmit descriptor write-back policy for both queues */
txdctl = er32(TXDCTL(0));
@@ -3262,7 +3248,7 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
*/
e1000_clear_hw_cntrs_ich8lan(hw);
- return 0;
+ return ret_val;
}
/**
* e1000_initialize_hw_bits_ich8lan - Initialize required hardware bits
@@ -3339,7 +3325,7 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw)
{
s32 ret_val;
- if (e1000_check_reset_block(hw))
+ if (hw->phy.ops.check_reset_block(hw))
return 0;
/*
@@ -3365,7 +3351,7 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw)
hw->fc.current_mode);
/* Continue to configure the copper link. */
- ret_val = e1000_setup_copper_link_ich8lan(hw);
+ ret_val = hw->mac.ops.setup_physical_interface(hw);
if (ret_val)
return ret_val;
@@ -3465,6 +3451,7 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
default:
break;
}
+
return e1000e_setup_copper_link(hw);
}
@@ -3566,7 +3553,7 @@ static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw)
}
/**
- * e1000_set_kmrn_lock_loss_workaround_ich8lan - Set Kumeran workaround state
+ * e1000e_set_kmrn_lock_loss_workaround_ich8lan - Set Kumeran workaround state
* @hw: pointer to the HW structure
* @state: boolean value used to set the current Kumeran workaround state
*
@@ -3676,9 +3663,10 @@ void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw)
*
* During S0 to Sx transition, it is possible the link remains at gig
* instead of negotiating to a lower speed. Before going to Sx, set
- * 'LPLU Enabled' and 'Gig Disable' to force link speed negotiation
- * to a lower speed. For PCH and newer parts, the OEM bits PHY register
- * (LED, GbE disable and LPLU configurations) also needs to be written.
+ * 'Gig Disable' to force link speed negotiation to a lower speed based on
+ * the LPLU setting in the NVM or custom setting. For PCH and newer parts,
+ * the OEM bits PHY register (LED, GbE disable and LPLU configurations) also
+ * needs to be written.
**/
void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw)
{
@@ -3686,7 +3674,7 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw)
s32 ret_val;
phy_ctrl = er32(PHY_CTRL);
- phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU | E1000_PHY_CTRL_GBE_DISABLE;
+ phy_ctrl |= E1000_PHY_CTRL_GBE_DISABLE;
ew32(PHY_CTRL, phy_ctrl);
if (hw->mac.type == e1000_ich8lan)
@@ -3714,47 +3702,41 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw)
**/
void e1000_resume_workarounds_pchlan(struct e1000_hw *hw)
{
- u32 fwsm;
+ u16 phy_id1, phy_id2;
+ s32 ret_val;
- if (hw->mac.type != e1000_pch2lan)
+ if ((hw->mac.type != e1000_pch2lan) ||
+ hw->phy.ops.check_reset_block(hw))
return;
- fwsm = er32(FWSM);
- if (!(fwsm & E1000_ICH_FWSM_FW_VALID) || !e1000_check_reset_block(hw)) {
- u16 phy_id1, phy_id2;
- s32 ret_val;
-
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val) {
- e_dbg("Failed to acquire PHY semaphore in resume\n");
- return;
- }
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val) {
+ e_dbg("Failed to acquire PHY semaphore in resume\n");
+ return;
+ }
- /* Test access to the PHY registers by reading the ID regs */
- ret_val = hw->phy.ops.read_reg_locked(hw, PHY_ID1, &phy_id1);
- if (ret_val)
- goto release;
- ret_val = hw->phy.ops.read_reg_locked(hw, PHY_ID2, &phy_id2);
- if (ret_val)
- goto release;
+ /* Test access to the PHY registers by reading the ID regs */
+ ret_val = hw->phy.ops.read_reg_locked(hw, PHY_ID1, &phy_id1);
+ if (ret_val)
+ goto release;
+ ret_val = hw->phy.ops.read_reg_locked(hw, PHY_ID2, &phy_id2);
+ if (ret_val)
+ goto release;
- if (hw->phy.id == ((u32)(phy_id1 << 16) |
- (u32)(phy_id2 & PHY_REVISION_MASK)))
- goto release;
+ if (hw->phy.id == ((u32)(phy_id1 << 16) |
+ (u32)(phy_id2 & PHY_REVISION_MASK)))
+ goto release;
- e1000_toggle_lanphypc_value_ich8lan(hw);
+ e1000_toggle_lanphypc_value_ich8lan(hw);
- hw->phy.ops.release(hw);
- msleep(50);
- e1000_phy_hw_reset(hw);
- msleep(50);
- return;
- }
+ hw->phy.ops.release(hw);
+ msleep(50);
+ e1000_phy_hw_reset(hw);
+ msleep(50);
+ return;
release:
hw->phy.ops.release(hw);
-
- return;
}
/**
@@ -4023,7 +4005,6 @@ release:
}
static const struct e1000_mac_operations ich8_mac_ops = {
- .id_led_init = e1000e_id_led_init,
/* check_mng_mode dependent on mac type */
.check_for_link = e1000_check_for_copper_link_ich8lan,
/* cleanup_led dependent on mac type */
@@ -4039,6 +4020,7 @@ static const struct e1000_mac_operations ich8_mac_ops = {
.setup_link = e1000_setup_link_ich8lan,
.setup_physical_interface= e1000_setup_copper_link_ich8lan,
/* id_led_init dependent on mac type */
+ .config_collision_dist = e1000e_config_collision_dist_generic,
};
static const struct e1000_phy_operations ich8_phy_ops = {
@@ -4059,6 +4041,7 @@ static const struct e1000_nvm_operations ich8_nvm_ops = {
.acquire = e1000_acquire_nvm_ich8lan,
.read = e1000_read_nvm_ich8lan,
.release = e1000_release_nvm_ich8lan,
+ .reload = e1000e_reload_nvm_generic,
.update = e1000_update_nvm_checksum_ich8lan,
.valid_led_default = e1000_valid_led_default_ich8lan,
.validate = e1000_validate_nvm_checksum_ich8lan,
@@ -4088,10 +4071,9 @@ const struct e1000_info e1000_ich9_info = {
| FLAG_HAS_WOL
| FLAG_HAS_CTRLEXT_ON_LOAD
| FLAG_HAS_AMT
- | FLAG_HAS_ERT
| FLAG_HAS_FLASH
| FLAG_APME_IN_WUC,
- .pba = 10,
+ .pba = 18,
.max_hw_frame_size = DEFAULT_JUMBO,
.get_variants = e1000_get_variants_ich8lan,
.mac_ops = &ich8_mac_ops,
@@ -4106,10 +4088,9 @@ const struct e1000_info e1000_ich10_info = {
| FLAG_HAS_WOL
| FLAG_HAS_CTRLEXT_ON_LOAD
| FLAG_HAS_AMT
- | FLAG_HAS_ERT
| FLAG_HAS_FLASH
| FLAG_APME_IN_WUC,
- .pba = 10,
+ .pba = 18,
.max_hw_frame_size = DEFAULT_JUMBO,
.get_variants = e1000_get_variants_ich8lan,
.mac_ops = &ich8_mac_ops,
diff --git a/drivers/net/ethernet/intel/e1000e/lib.c b/drivers/net/ethernet/intel/e1000e/mac.c
index 0893ab107adf..decad98c1059 100644
--- a/drivers/net/ethernet/intel/e1000e/lib.c
+++ b/drivers/net/ethernet/intel/e1000e/mac.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -28,19 +28,6 @@
#include "e1000.h"
-enum e1000_mng_mode {
- e1000_mng_mode_none = 0,
- e1000_mng_mode_asf,
- e1000_mng_mode_pt,
- e1000_mng_mode_ipmi,
- e1000_mng_mode_host_if_only
-};
-
-#define E1000_FACTPS_MNGCG 0x20000000
-
-/* Intel(R) Active Management Technology signature */
-#define E1000_IAMT_SIGNATURE 0x544D4149
-
/**
* e1000e_get_bus_info_pcie - Get PCIe bus information
* @hw: pointer to the HW structure
@@ -151,7 +138,7 @@ void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value)
void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count)
{
u32 i;
- u8 mac_addr[ETH_ALEN] = {0};
+ u8 mac_addr[ETH_ALEN] = { 0 };
/* Setup the receive address */
e_dbg("Programming MAC Address into RAR[0]\n");
@@ -159,7 +146,7 @@ void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count)
e1000e_rar_set(hw, hw->mac.addr, 0);
/* Zero out the other (rar_entry_count - 1) receive addresses */
- e_dbg("Clearing RAR[1-%u]\n", rar_count-1);
+ e_dbg("Clearing RAR[1-%u]\n", rar_count - 1);
for (i = 1; i < rar_count; i++)
e1000e_rar_set(hw, mac_addr, i);
}
@@ -185,26 +172,23 @@ s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw)
ret_val = e1000_read_nvm(hw, NVM_COMPAT, 1, &nvm_data);
if (ret_val)
- goto out;
+ return ret_val;
- /* Check for LOM (vs. NIC) or one of two valid mezzanine cards */
- if (!((nvm_data & NVM_COMPAT_LOM) ||
- (hw->adapter->pdev->device == E1000_DEV_ID_82571EB_SERDES_DUAL) ||
- (hw->adapter->pdev->device == E1000_DEV_ID_82571EB_SERDES_QUAD) ||
- (hw->adapter->pdev->device == E1000_DEV_ID_82571EB_SERDES)))
- goto out;
+ /* not supported on 82573 */
+ if (hw->mac.type == e1000_82573)
+ return 0;
ret_val = e1000_read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1,
- &nvm_alt_mac_addr_offset);
+ &nvm_alt_mac_addr_offset);
if (ret_val) {
e_dbg("NVM Read Error\n");
- goto out;
+ return ret_val;
}
if ((nvm_alt_mac_addr_offset == 0xFFFF) ||
(nvm_alt_mac_addr_offset == 0x0000))
/* There is no Alternate MAC Address */
- goto out;
+ return 0;
if (hw->bus.func == E1000_FUNC_1)
nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN1;
@@ -213,7 +197,7 @@ s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw)
ret_val = e1000_read_nvm(hw, offset, 1, &nvm_data);
if (ret_val) {
e_dbg("NVM Read Error\n");
- goto out;
+ return ret_val;
}
alt_mac_addr[i] = (u8)(nvm_data & 0xFF);
@@ -223,7 +207,7 @@ s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw)
/* if multicast bit is set, the alternate address will not be used */
if (is_multicast_ether_addr(alt_mac_addr)) {
e_dbg("Ignoring Alternate Mac Address with MC bit set\n");
- goto out;
+ return 0;
}
/*
@@ -233,8 +217,7 @@ s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw)
*/
e1000e_rar_set(hw, alt_mac_addr, 0);
-out:
- return ret_val;
+ return 0;
}
/**
@@ -254,11 +237,10 @@ void e1000e_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
* HW expects these in little endian so we reverse the byte order
* from network order (big endian) to little endian
*/
- rar_low = ((u32) addr[0] |
- ((u32) addr[1] << 8) |
- ((u32) addr[2] << 16) | ((u32) addr[3] << 24));
+ rar_low = ((u32)addr[0] | ((u32)addr[1] << 8) |
+ ((u32)addr[2] << 16) | ((u32)addr[3] << 24));
- rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
+ rar_high = ((u32)addr[4] | ((u32)addr[5] << 8));
/* If MAC address zero, no need to set the AV bit */
if (rar_low || rar_high)
@@ -281,8 +263,7 @@ void e1000e_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
* @mc_addr: pointer to a multicast address
*
* Generates a multicast address hash value which is used to determine
- * the multicast filter table array address and new table value. See
- * e1000_mta_set_generic()
+ * the multicast filter table array address and new table value.
**/
static u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
{
@@ -318,7 +299,7 @@ static u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
* values resulting from each mc_filter_type...
* [0] [1] [2] [3] [4] [5]
* 01 AA 00 12 34 56
- * LSB MSB
+ * LSB MSB
*
* case 0: hash_value = ((0x34 >> 4) | (0x56 << 4)) & 0xFFF = 0x563
* case 1: hash_value = ((0x34 >> 3) | (0x56 << 5)) & 0xFFF = 0xAC6
@@ -341,7 +322,7 @@ static u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
}
hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) |
- (((u16) mc_addr[5]) << bit_shift)));
+ (((u16)mc_addr[5]) << bit_shift)));
return hash_value;
}
@@ -365,7 +346,7 @@ void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw,
memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow));
/* update mta_shadow from mc_addr_list */
- for (i = 0; (u32) i < mc_addr_count; i++) {
+ for (i = 0; (u32)i < mc_addr_count; i++) {
hash_value = e1000_hash_mc_addr(hw, mc_addr_list);
hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1);
@@ -461,7 +442,7 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
return ret_val;
if (!link)
- return ret_val; /* No link detected */
+ return 0; /* No link detected */
mac->get_link_status = false;
@@ -475,17 +456,15 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
* If we are forcing speed/duplex, then we simply return since
* we have already determined whether we have link or not.
*/
- if (!mac->autoneg) {
- ret_val = -E1000_ERR_CONFIG;
- return ret_val;
- }
+ if (!mac->autoneg)
+ return -E1000_ERR_CONFIG;
/*
* Auto-Neg is enabled. Auto Speed Detection takes care
* of MAC speed/duplex configuration. So we only need to
* configure Collision Distance in the MAC.
*/
- e1000e_config_collision_dist(hw);
+ mac->ops.config_collision_dist(hw);
/*
* Configure Flow Control now that Auto-Neg has completed.
@@ -528,10 +507,10 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw)
* was just plugged in. The autoneg_failed flag does this.
*/
/* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */
- if ((ctrl & E1000_CTRL_SWDPIN1) && (!(status & E1000_STATUS_LU)) &&
- (!(rxcw & E1000_RXCW_C))) {
- if (mac->autoneg_failed == 0) {
- mac->autoneg_failed = 1;
+ if ((ctrl & E1000_CTRL_SWDPIN1) && !(status & E1000_STATUS_LU) &&
+ !(rxcw & E1000_RXCW_C)) {
+ if (!mac->autoneg_failed) {
+ mac->autoneg_failed = true;
return 0;
}
e_dbg("NOT Rx'ing /C/, disable AutoNeg and force link.\n");
@@ -594,9 +573,9 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
* time to complete.
*/
/* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */
- if ((!(status & E1000_STATUS_LU)) && (!(rxcw & E1000_RXCW_C))) {
- if (mac->autoneg_failed == 0) {
- mac->autoneg_failed = 1;
+ if (!(status & E1000_STATUS_LU) && !(rxcw & E1000_RXCW_C)) {
+ if (!mac->autoneg_failed) {
+ mac->autoneg_failed = true;
return 0;
}
e_dbg("NOT Rx'ing /C/, disable AutoNeg and force link.\n");
@@ -650,18 +629,16 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
if (E1000_TXCW_ANE & er32(TXCW)) {
status = er32(STATUS);
if (status & E1000_STATUS_LU) {
- /* SYNCH bit and IV bit are sticky, so reread rxcw. */
+ /* SYNCH bit and IV bit are sticky, so reread rxcw. */
udelay(10);
rxcw = er32(RXCW);
if (rxcw & E1000_RXCW_SYNCH) {
if (!(rxcw & E1000_RXCW_IV)) {
mac->serdes_has_link = true;
- e_dbg("SERDES: Link up - autoneg "
- "completed successfully.\n");
+ e_dbg("SERDES: Link up - autoneg completed successfully.\n");
} else {
mac->serdes_has_link = false;
- e_dbg("SERDES: Link down - invalid"
- "codewords detected in autoneg.\n");
+ e_dbg("SERDES: Link down - invalid codewords detected in autoneg.\n");
}
} else {
mac->serdes_has_link = false;
@@ -706,8 +683,7 @@ static s32 e1000_set_default_fc_generic(struct e1000_hw *hw)
if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == 0)
hw->fc.requested_mode = e1000_fc_none;
- else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) ==
- NVM_WORD0F_ASM_DIR)
+ else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == NVM_WORD0F_ASM_DIR)
hw->fc.requested_mode = e1000_fc_tx_pause;
else
hw->fc.requested_mode = e1000_fc_full;
@@ -716,7 +692,7 @@ static s32 e1000_set_default_fc_generic(struct e1000_hw *hw)
}
/**
- * e1000e_setup_link - Setup flow control and link settings
+ * e1000e_setup_link_generic - Setup flow control and link settings
* @hw: pointer to the HW structure
*
* Determines which flow control settings to use, then configures flow
@@ -725,16 +701,15 @@ static s32 e1000_set_default_fc_generic(struct e1000_hw *hw)
* should be established. Assumes the hardware has previously been reset
* and the transmitter and receiver are not enabled.
**/
-s32 e1000e_setup_link(struct e1000_hw *hw)
+s32 e1000e_setup_link_generic(struct e1000_hw *hw)
{
- struct e1000_mac_info *mac = &hw->mac;
s32 ret_val;
/*
* In the case of the phy reset being blocked, we already have a link.
* We do not need to set it up again.
*/
- if (e1000_check_reset_block(hw))
+ if (hw->phy.ops.check_reset_block(hw))
return 0;
/*
@@ -753,11 +728,10 @@ s32 e1000e_setup_link(struct e1000_hw *hw)
*/
hw->fc.current_mode = hw->fc.requested_mode;
- e_dbg("After fix-ups FlowControl is now = %x\n",
- hw->fc.current_mode);
+ e_dbg("After fix-ups FlowControl is now = %x\n", hw->fc.current_mode);
/* Call the necessary media_type subroutine to configure the link. */
- ret_val = mac->ops.setup_physical_interface(hw);
+ ret_val = hw->mac.ops.setup_physical_interface(hw);
if (ret_val)
return ret_val;
@@ -876,7 +850,7 @@ static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw)
}
if (i == FIBER_LINK_UP_LIMIT) {
e_dbg("Never got a valid link from auto-neg!!!\n");
- mac->autoneg_failed = 1;
+ mac->autoneg_failed = true;
/*
* AutoNeg failed to achieve a link, so we'll call
* mac->check_for_link. This routine will force the
@@ -888,9 +862,9 @@ static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw)
e_dbg("Error while checking for link\n");
return ret_val;
}
- mac->autoneg_failed = 0;
+ mac->autoneg_failed = false;
} else {
- mac->autoneg_failed = 0;
+ mac->autoneg_failed = false;
e_dbg("Valid Link Found\n");
}
@@ -914,7 +888,7 @@ s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw)
/* Take the link out of reset */
ctrl &= ~E1000_CTRL_LRST;
- e1000e_config_collision_dist(hw);
+ hw->mac.ops.config_collision_dist(hw);
ret_val = e1000_commit_fc_settings_generic(hw);
if (ret_val)
@@ -945,18 +919,17 @@ s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw)
e_dbg("No signal detected\n");
}
- return 0;
+ return ret_val;
}
/**
- * e1000e_config_collision_dist - Configure collision distance
+ * e1000e_config_collision_dist_generic - Configure collision distance
* @hw: pointer to the HW structure
*
* Configures the collision distance to the default value and is used
- * during link setup. Currently no func pointer exists and all
- * implementations are handled in the generic version of this function.
+ * during link setup.
**/
-void e1000e_config_collision_dist(struct e1000_hw *hw)
+void e1000e_config_collision_dist_generic(struct e1000_hw *hw)
{
u32 tctl;
@@ -995,7 +968,9 @@ s32 e1000e_set_fc_watermarks(struct e1000_hw *hw)
* XON frames.
*/
fcrtl = hw->fc.low_water;
- fcrtl |= E1000_FCRTL_XONE;
+ if (hw->fc.send_xon)
+ fcrtl |= E1000_FCRTL_XONE;
+
fcrth = hw->fc.high_water;
}
ew32(FCRTL, fcrtl);
@@ -1121,8 +1096,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
return ret_val;
if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) {
- e_dbg("Copper PHY and Auto Neg "
- "has not completed.\n");
+ e_dbg("Copper PHY and Auto Neg has not completed.\n");
return ret_val;
}
@@ -1186,11 +1160,10 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
*/
if (hw->fc.requested_mode == e1000_fc_full) {
hw->fc.current_mode = e1000_fc_full;
- e_dbg("Flow Control = FULL.\r\n");
+ e_dbg("Flow Control = FULL.\n");
} else {
hw->fc.current_mode = e1000_fc_rx_pause;
- e_dbg("Flow Control = "
- "Rx PAUSE frames only.\r\n");
+ e_dbg("Flow Control = Rx PAUSE frames only.\n");
}
}
/*
@@ -1202,11 +1175,11 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
* 0 | 1 | 1 | 1 | e1000_fc_tx_pause
*/
else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) &&
- (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
- (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
- (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
+ (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
hw->fc.current_mode = e1000_fc_tx_pause;
- e_dbg("Flow Control = Tx PAUSE frames only.\r\n");
+ e_dbg("Flow Control = Tx PAUSE frames only.\n");
}
/*
* For transmitting PAUSE frames ONLY.
@@ -1221,14 +1194,14 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
!(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
(mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
hw->fc.current_mode = e1000_fc_rx_pause;
- e_dbg("Flow Control = Rx PAUSE frames only.\r\n");
+ e_dbg("Flow Control = Rx PAUSE frames only.\n");
} else {
/*
* Per the IEEE spec, at this point flow control
* should be disabled.
*/
hw->fc.current_mode = e1000_fc_none;
- e_dbg("Flow Control = NONE.\r\n");
+ e_dbg("Flow Control = NONE.\n");
}
/*
@@ -1268,7 +1241,8 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
* Read the status register for the current speed/duplex and store the current
* speed and duplex for copper connections.
**/
-s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *duplex)
+s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex)
{
u32 status;
@@ -1301,7 +1275,8 @@ s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *dup
* Sets the speed and duplex to gigabit full duplex (the only possible option)
* for fiber/serdes links.
**/
-s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed, u16 *duplex)
+s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex)
{
*speed = SPEED_1000;
*duplex = FULL_DUPLEX;
@@ -1423,11 +1398,11 @@ s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data)
}
/**
- * e1000e_id_led_init -
+ * e1000e_id_led_init_generic -
* @hw: pointer to the HW structure
*
**/
-s32 e1000e_id_led_init(struct e1000_hw *hw)
+s32 e1000e_id_led_init_generic(struct e1000_hw *hw)
{
struct e1000_mac_info *mac = &hw->mac;
s32 ret_val;
@@ -1504,11 +1479,10 @@ s32 e1000e_setup_led_generic(struct e1000_hw *hw)
ledctl = er32(LEDCTL);
hw->mac.ledctl_default = ledctl;
/* Turn off LED0 */
- ledctl &= ~(E1000_LEDCTL_LED0_IVRT |
- E1000_LEDCTL_LED0_BLINK |
- E1000_LEDCTL_LED0_MODE_MASK);
+ ledctl &= ~(E1000_LEDCTL_LED0_IVRT | E1000_LEDCTL_LED0_BLINK |
+ E1000_LEDCTL_LED0_MODE_MASK);
ledctl |= (E1000_LEDCTL_MODE_LED_OFF <<
- E1000_LEDCTL_LED0_MODE_SHIFT);
+ E1000_LEDCTL_LED0_MODE_SHIFT);
ew32(LEDCTL, ledctl);
} else if (hw->phy.media_type == e1000_media_type_copper) {
ew32(LEDCTL, hw->mac.ledctl_mode1);
@@ -1544,7 +1518,7 @@ s32 e1000e_blink_led_generic(struct e1000_hw *hw)
if (hw->phy.media_type == e1000_media_type_fiber) {
/* always blink LED0 for PCI-E fiber */
ledctl_blink = E1000_LEDCTL_LED0_BLINK |
- (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT);
+ (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT);
} else {
/*
* set the blink bit for each LED that's "on" (0x0E)
@@ -1657,8 +1631,7 @@ s32 e1000e_disable_pcie_master(struct e1000_hw *hw)
ew32(CTRL, ctrl);
while (timeout) {
- if (!(er32(STATUS) &
- E1000_STATUS_GIO_MASTER_ENABLE))
+ if (!(er32(STATUS) & E1000_STATUS_GIO_MASTER_ENABLE))
break;
udelay(100);
timeout--;
@@ -1684,7 +1657,7 @@ void e1000e_reset_adaptive(struct e1000_hw *hw)
if (!mac->adaptive_ifs) {
e_dbg("Not in Adaptive IFS mode!\n");
- goto out;
+ return;
}
mac->current_ifs_val = 0;
@@ -1695,8 +1668,6 @@ void e1000e_reset_adaptive(struct e1000_hw *hw)
mac->in_ifs_mode = false;
ew32(AIT, 0);
-out:
- return;
}
/**
@@ -1712,7 +1683,7 @@ void e1000e_update_adaptive(struct e1000_hw *hw)
if (!mac->adaptive_ifs) {
e_dbg("Not in Adaptive IFS mode!\n");
- goto out;
+ return;
}
if ((mac->collision_delta * mac->ifs_ratio) > mac->tx_packet_delta) {
@@ -1723,7 +1694,7 @@ void e1000e_update_adaptive(struct e1000_hw *hw)
mac->current_ifs_val = mac->ifs_min_val;
else
mac->current_ifs_val +=
- mac->ifs_step_size;
+ mac->ifs_step_size;
ew32(AIT, mac->current_ifs_val);
}
}
@@ -1735,959 +1706,4 @@ void e1000e_update_adaptive(struct e1000_hw *hw)
ew32(AIT, 0);
}
}
-out:
- return;
-}
-
-/**
- * e1000_raise_eec_clk - Raise EEPROM clock
- * @hw: pointer to the HW structure
- * @eecd: pointer to the EEPROM
- *
- * Enable/Raise the EEPROM clock bit.
- **/
-static void e1000_raise_eec_clk(struct e1000_hw *hw, u32 *eecd)
-{
- *eecd = *eecd | E1000_EECD_SK;
- ew32(EECD, *eecd);
- e1e_flush();
- udelay(hw->nvm.delay_usec);
-}
-
-/**
- * e1000_lower_eec_clk - Lower EEPROM clock
- * @hw: pointer to the HW structure
- * @eecd: pointer to the EEPROM
- *
- * Clear/Lower the EEPROM clock bit.
- **/
-static void e1000_lower_eec_clk(struct e1000_hw *hw, u32 *eecd)
-{
- *eecd = *eecd & ~E1000_EECD_SK;
- ew32(EECD, *eecd);
- e1e_flush();
- udelay(hw->nvm.delay_usec);
-}
-
-/**
- * e1000_shift_out_eec_bits - Shift data bits our to the EEPROM
- * @hw: pointer to the HW structure
- * @data: data to send to the EEPROM
- * @count: number of bits to shift out
- *
- * We need to shift 'count' bits out to the EEPROM. So, the value in the
- * "data" parameter will be shifted out to the EEPROM one bit at a time.
- * In order to do this, "data" must be broken down into bits.
- **/
-static void e1000_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count)
-{
- struct e1000_nvm_info *nvm = &hw->nvm;
- u32 eecd = er32(EECD);
- u32 mask;
-
- mask = 0x01 << (count - 1);
- if (nvm->type == e1000_nvm_eeprom_spi)
- eecd |= E1000_EECD_DO;
-
- do {
- eecd &= ~E1000_EECD_DI;
-
- if (data & mask)
- eecd |= E1000_EECD_DI;
-
- ew32(EECD, eecd);
- e1e_flush();
-
- udelay(nvm->delay_usec);
-
- e1000_raise_eec_clk(hw, &eecd);
- e1000_lower_eec_clk(hw, &eecd);
-
- mask >>= 1;
- } while (mask);
-
- eecd &= ~E1000_EECD_DI;
- ew32(EECD, eecd);
-}
-
-/**
- * e1000_shift_in_eec_bits - Shift data bits in from the EEPROM
- * @hw: pointer to the HW structure
- * @count: number of bits to shift in
- *
- * In order to read a register from the EEPROM, we need to shift 'count' bits
- * in from the EEPROM. Bits are "shifted in" by raising the clock input to
- * the EEPROM (setting the SK bit), and then reading the value of the data out
- * "DO" bit. During this "shifting in" process the data in "DI" bit should
- * always be clear.
- **/
-static u16 e1000_shift_in_eec_bits(struct e1000_hw *hw, u16 count)
-{
- u32 eecd;
- u32 i;
- u16 data;
-
- eecd = er32(EECD);
-
- eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
- data = 0;
-
- for (i = 0; i < count; i++) {
- data <<= 1;
- e1000_raise_eec_clk(hw, &eecd);
-
- eecd = er32(EECD);
-
- eecd &= ~E1000_EECD_DI;
- if (eecd & E1000_EECD_DO)
- data |= 1;
-
- e1000_lower_eec_clk(hw, &eecd);
- }
-
- return data;
-}
-
-/**
- * e1000e_poll_eerd_eewr_done - Poll for EEPROM read/write completion
- * @hw: pointer to the HW structure
- * @ee_reg: EEPROM flag for polling
- *
- * Polls the EEPROM status bit for either read or write completion based
- * upon the value of 'ee_reg'.
- **/
-s32 e1000e_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg)
-{
- u32 attempts = 100000;
- u32 i, reg = 0;
-
- for (i = 0; i < attempts; i++) {
- if (ee_reg == E1000_NVM_POLL_READ)
- reg = er32(EERD);
- else
- reg = er32(EEWR);
-
- if (reg & E1000_NVM_RW_REG_DONE)
- return 0;
-
- udelay(5);
- }
-
- return -E1000_ERR_NVM;
-}
-
-/**
- * e1000e_acquire_nvm - Generic request for access to EEPROM
- * @hw: pointer to the HW structure
- *
- * Set the EEPROM access request bit and wait for EEPROM access grant bit.
- * Return successful if access grant bit set, else clear the request for
- * EEPROM access and return -E1000_ERR_NVM (-1).
- **/
-s32 e1000e_acquire_nvm(struct e1000_hw *hw)
-{
- u32 eecd = er32(EECD);
- s32 timeout = E1000_NVM_GRANT_ATTEMPTS;
-
- ew32(EECD, eecd | E1000_EECD_REQ);
- eecd = er32(EECD);
-
- while (timeout) {
- if (eecd & E1000_EECD_GNT)
- break;
- udelay(5);
- eecd = er32(EECD);
- timeout--;
- }
-
- if (!timeout) {
- eecd &= ~E1000_EECD_REQ;
- ew32(EECD, eecd);
- e_dbg("Could not acquire NVM grant\n");
- return -E1000_ERR_NVM;
- }
-
- return 0;
-}
-
-/**
- * e1000_standby_nvm - Return EEPROM to standby state
- * @hw: pointer to the HW structure
- *
- * Return the EEPROM to a standby state.
- **/
-static void e1000_standby_nvm(struct e1000_hw *hw)
-{
- struct e1000_nvm_info *nvm = &hw->nvm;
- u32 eecd = er32(EECD);
-
- if (nvm->type == e1000_nvm_eeprom_spi) {
- /* Toggle CS to flush commands */
- eecd |= E1000_EECD_CS;
- ew32(EECD, eecd);
- e1e_flush();
- udelay(nvm->delay_usec);
- eecd &= ~E1000_EECD_CS;
- ew32(EECD, eecd);
- e1e_flush();
- udelay(nvm->delay_usec);
- }
-}
-
-/**
- * e1000_stop_nvm - Terminate EEPROM command
- * @hw: pointer to the HW structure
- *
- * Terminates the current command by inverting the EEPROM's chip select pin.
- **/
-static void e1000_stop_nvm(struct e1000_hw *hw)
-{
- u32 eecd;
-
- eecd = er32(EECD);
- if (hw->nvm.type == e1000_nvm_eeprom_spi) {
- /* Pull CS high */
- eecd |= E1000_EECD_CS;
- e1000_lower_eec_clk(hw, &eecd);
- }
-}
-
-/**
- * e1000e_release_nvm - Release exclusive access to EEPROM
- * @hw: pointer to the HW structure
- *
- * Stop any current commands to the EEPROM and clear the EEPROM request bit.
- **/
-void e1000e_release_nvm(struct e1000_hw *hw)
-{
- u32 eecd;
-
- e1000_stop_nvm(hw);
-
- eecd = er32(EECD);
- eecd &= ~E1000_EECD_REQ;
- ew32(EECD, eecd);
-}
-
-/**
- * e1000_ready_nvm_eeprom - Prepares EEPROM for read/write
- * @hw: pointer to the HW structure
- *
- * Setups the EEPROM for reading and writing.
- **/
-static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw)
-{
- struct e1000_nvm_info *nvm = &hw->nvm;
- u32 eecd = er32(EECD);
- u8 spi_stat_reg;
-
- if (nvm->type == e1000_nvm_eeprom_spi) {
- u16 timeout = NVM_MAX_RETRY_SPI;
-
- /* Clear SK and CS */
- eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
- ew32(EECD, eecd);
- e1e_flush();
- udelay(1);
-
- /*
- * Read "Status Register" repeatedly until the LSB is cleared.
- * The EEPROM will signal that the command has been completed
- * by clearing bit 0 of the internal status register. If it's
- * not cleared within 'timeout', then error out.
- */
- while (timeout) {
- e1000_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI,
- hw->nvm.opcode_bits);
- spi_stat_reg = (u8)e1000_shift_in_eec_bits(hw, 8);
- if (!(spi_stat_reg & NVM_STATUS_RDY_SPI))
- break;
-
- udelay(5);
- e1000_standby_nvm(hw);
- timeout--;
- }
-
- if (!timeout) {
- e_dbg("SPI NVM Status error\n");
- return -E1000_ERR_NVM;
- }
- }
-
- return 0;
-}
-
-/**
- * e1000e_read_nvm_eerd - Reads EEPROM using EERD register
- * @hw: pointer to the HW structure
- * @offset: offset of word in the EEPROM to read
- * @words: number of words to read
- * @data: word read from the EEPROM
- *
- * Reads a 16 bit word from the EEPROM using the EERD register.
- **/
-s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
-{
- struct e1000_nvm_info *nvm = &hw->nvm;
- u32 i, eerd = 0;
- s32 ret_val = 0;
-
- /*
- * A check for invalid values: offset too large, too many words,
- * too many words for the offset, and not enough words.
- */
- if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
- (words == 0)) {
- e_dbg("nvm parameter(s) out of bounds\n");
- return -E1000_ERR_NVM;
- }
-
- for (i = 0; i < words; i++) {
- eerd = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) +
- E1000_NVM_RW_REG_START;
-
- ew32(EERD, eerd);
- ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ);
- if (ret_val)
- break;
-
- data[i] = (er32(EERD) >> E1000_NVM_RW_REG_DATA);
- }
-
- return ret_val;
-}
-
-/**
- * e1000e_write_nvm_spi - Write to EEPROM using SPI
- * @hw: pointer to the HW structure
- * @offset: offset within the EEPROM to be written to
- * @words: number of words to write
- * @data: 16 bit word(s) to be written to the EEPROM
- *
- * Writes data to EEPROM at offset using SPI interface.
- *
- * If e1000e_update_nvm_checksum is not called after this function , the
- * EEPROM will most likely contain an invalid checksum.
- **/
-s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
-{
- struct e1000_nvm_info *nvm = &hw->nvm;
- s32 ret_val;
- u16 widx = 0;
-
- /*
- * A check for invalid values: offset too large, too many words,
- * and not enough words.
- */
- if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
- (words == 0)) {
- e_dbg("nvm parameter(s) out of bounds\n");
- return -E1000_ERR_NVM;
- }
-
- ret_val = nvm->ops.acquire(hw);
- if (ret_val)
- return ret_val;
-
- while (widx < words) {
- u8 write_opcode = NVM_WRITE_OPCODE_SPI;
-
- ret_val = e1000_ready_nvm_eeprom(hw);
- if (ret_val) {
- nvm->ops.release(hw);
- return ret_val;
- }
-
- e1000_standby_nvm(hw);
-
- /* Send the WRITE ENABLE command (8 bit opcode) */
- e1000_shift_out_eec_bits(hw, NVM_WREN_OPCODE_SPI,
- nvm->opcode_bits);
-
- e1000_standby_nvm(hw);
-
- /*
- * Some SPI eeproms use the 8th address bit embedded in the
- * opcode
- */
- if ((nvm->address_bits == 8) && (offset >= 128))
- write_opcode |= NVM_A8_OPCODE_SPI;
-
- /* Send the Write command (8-bit opcode + addr) */
- e1000_shift_out_eec_bits(hw, write_opcode, nvm->opcode_bits);
- e1000_shift_out_eec_bits(hw, (u16)((offset + widx) * 2),
- nvm->address_bits);
-
- /* Loop to allow for up to whole page write of eeprom */
- while (widx < words) {
- u16 word_out = data[widx];
- word_out = (word_out >> 8) | (word_out << 8);
- e1000_shift_out_eec_bits(hw, word_out, 16);
- widx++;
-
- if ((((offset + widx) * 2) % nvm->page_size) == 0) {
- e1000_standby_nvm(hw);
- break;
- }
- }
- }
-
- usleep_range(10000, 20000);
- nvm->ops.release(hw);
- return 0;
-}
-
-/**
- * e1000_read_pba_string_generic - Read device part number
- * @hw: pointer to the HW structure
- * @pba_num: pointer to device part number
- * @pba_num_size: size of part number buffer
- *
- * Reads the product board assembly (PBA) number from the EEPROM and stores
- * the value in pba_num.
- **/
-s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num,
- u32 pba_num_size)
-{
- s32 ret_val;
- u16 nvm_data;
- u16 pba_ptr;
- u16 offset;
- u16 length;
-
- if (pba_num == NULL) {
- e_dbg("PBA string buffer was null\n");
- ret_val = E1000_ERR_INVALID_ARGUMENT;
- goto out;
- }
-
- ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
- if (ret_val) {
- e_dbg("NVM Read Error\n");
- goto out;
- }
-
- ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_1, 1, &pba_ptr);
- if (ret_val) {
- e_dbg("NVM Read Error\n");
- goto out;
- }
-
- /*
- * if nvm_data is not ptr guard the PBA must be in legacy format which
- * means pba_ptr is actually our second data word for the PBA number
- * and we can decode it into an ascii string
- */
- if (nvm_data != NVM_PBA_PTR_GUARD) {
- e_dbg("NVM PBA number is not stored as string\n");
-
- /* we will need 11 characters to store the PBA */
- if (pba_num_size < 11) {
- e_dbg("PBA string buffer too small\n");
- return E1000_ERR_NO_SPACE;
- }
-
- /* extract hex string from data and pba_ptr */
- pba_num[0] = (nvm_data >> 12) & 0xF;
- pba_num[1] = (nvm_data >> 8) & 0xF;
- pba_num[2] = (nvm_data >> 4) & 0xF;
- pba_num[3] = nvm_data & 0xF;
- pba_num[4] = (pba_ptr >> 12) & 0xF;
- pba_num[5] = (pba_ptr >> 8) & 0xF;
- pba_num[6] = '-';
- pba_num[7] = 0;
- pba_num[8] = (pba_ptr >> 4) & 0xF;
- pba_num[9] = pba_ptr & 0xF;
-
- /* put a null character on the end of our string */
- pba_num[10] = '\0';
-
- /* switch all the data but the '-' to hex char */
- for (offset = 0; offset < 10; offset++) {
- if (pba_num[offset] < 0xA)
- pba_num[offset] += '0';
- else if (pba_num[offset] < 0x10)
- pba_num[offset] += 'A' - 0xA;
- }
-
- goto out;
- }
-
- ret_val = e1000_read_nvm(hw, pba_ptr, 1, &length);
- if (ret_val) {
- e_dbg("NVM Read Error\n");
- goto out;
- }
-
- if (length == 0xFFFF || length == 0) {
- e_dbg("NVM PBA number section invalid length\n");
- ret_val = E1000_ERR_NVM_PBA_SECTION;
- goto out;
- }
- /* check if pba_num buffer is big enough */
- if (pba_num_size < (((u32)length * 2) - 1)) {
- e_dbg("PBA string buffer too small\n");
- ret_val = E1000_ERR_NO_SPACE;
- goto out;
- }
-
- /* trim pba length from start of string */
- pba_ptr++;
- length--;
-
- for (offset = 0; offset < length; offset++) {
- ret_val = e1000_read_nvm(hw, pba_ptr + offset, 1, &nvm_data);
- if (ret_val) {
- e_dbg("NVM Read Error\n");
- goto out;
- }
- pba_num[offset * 2] = (u8)(nvm_data >> 8);
- pba_num[(offset * 2) + 1] = (u8)(nvm_data & 0xFF);
- }
- pba_num[offset * 2] = '\0';
-
-out:
- return ret_val;
-}
-
-/**
- * e1000_read_mac_addr_generic - Read device MAC address
- * @hw: pointer to the HW structure
- *
- * Reads the device MAC address from the EEPROM and stores the value.
- * Since devices with two ports use the same EEPROM, we increment the
- * last bit in the MAC address for the second port.
- **/
-s32 e1000_read_mac_addr_generic(struct e1000_hw *hw)
-{
- u32 rar_high;
- u32 rar_low;
- u16 i;
-
- rar_high = er32(RAH(0));
- rar_low = er32(RAL(0));
-
- for (i = 0; i < E1000_RAL_MAC_ADDR_LEN; i++)
- hw->mac.perm_addr[i] = (u8)(rar_low >> (i*8));
-
- for (i = 0; i < E1000_RAH_MAC_ADDR_LEN; i++)
- hw->mac.perm_addr[i+4] = (u8)(rar_high >> (i*8));
-
- for (i = 0; i < ETH_ALEN; i++)
- hw->mac.addr[i] = hw->mac.perm_addr[i];
-
- return 0;
-}
-
-/**
- * e1000e_validate_nvm_checksum_generic - Validate EEPROM checksum
- * @hw: pointer to the HW structure
- *
- * Calculates the EEPROM checksum by reading/adding each word of the EEPROM
- * and then verifies that the sum of the EEPROM is equal to 0xBABA.
- **/
-s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 checksum = 0;
- u16 i, nvm_data;
-
- for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
- ret_val = e1000_read_nvm(hw, i, 1, &nvm_data);
- if (ret_val) {
- e_dbg("NVM Read Error\n");
- return ret_val;
- }
- checksum += nvm_data;
- }
-
- if (checksum != (u16) NVM_SUM) {
- e_dbg("NVM Checksum Invalid\n");
- return -E1000_ERR_NVM;
- }
-
- return 0;
-}
-
-/**
- * e1000e_update_nvm_checksum_generic - Update EEPROM checksum
- * @hw: pointer to the HW structure
- *
- * Updates the EEPROM checksum by reading/adding each word of the EEPROM
- * up to the checksum. Then calculates the EEPROM checksum and writes the
- * value to the EEPROM.
- **/
-s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 checksum = 0;
- u16 i, nvm_data;
-
- for (i = 0; i < NVM_CHECKSUM_REG; i++) {
- ret_val = e1000_read_nvm(hw, i, 1, &nvm_data);
- if (ret_val) {
- e_dbg("NVM Read Error while updating checksum.\n");
- return ret_val;
- }
- checksum += nvm_data;
- }
- checksum = (u16) NVM_SUM - checksum;
- ret_val = e1000_write_nvm(hw, NVM_CHECKSUM_REG, 1, &checksum);
- if (ret_val)
- e_dbg("NVM Write Error while updating checksum.\n");
-
- return ret_val;
-}
-
-/**
- * e1000e_reload_nvm - Reloads EEPROM
- * @hw: pointer to the HW structure
- *
- * Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the
- * extended control register.
- **/
-void e1000e_reload_nvm(struct e1000_hw *hw)
-{
- u32 ctrl_ext;
-
- udelay(10);
- ctrl_ext = er32(CTRL_EXT);
- ctrl_ext |= E1000_CTRL_EXT_EE_RST;
- ew32(CTRL_EXT, ctrl_ext);
- e1e_flush();
-}
-
-/**
- * e1000_calculate_checksum - Calculate checksum for buffer
- * @buffer: pointer to EEPROM
- * @length: size of EEPROM to calculate a checksum for
- *
- * Calculates the checksum for some buffer on a specified length. The
- * checksum calculated is returned.
- **/
-static u8 e1000_calculate_checksum(u8 *buffer, u32 length)
-{
- u32 i;
- u8 sum = 0;
-
- if (!buffer)
- return 0;
-
- for (i = 0; i < length; i++)
- sum += buffer[i];
-
- return (u8) (0 - sum);
-}
-
-/**
- * e1000_mng_enable_host_if - Checks host interface is enabled
- * @hw: pointer to the HW structure
- *
- * Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND
- *
- * This function checks whether the HOST IF is enabled for command operation
- * and also checks whether the previous command is completed. It busy waits
- * in case of previous command is not completed.
- **/
-static s32 e1000_mng_enable_host_if(struct e1000_hw *hw)
-{
- u32 hicr;
- u8 i;
-
- if (!(hw->mac.arc_subsystem_valid)) {
- e_dbg("ARC subsystem not valid.\n");
- return -E1000_ERR_HOST_INTERFACE_COMMAND;
- }
-
- /* Check that the host interface is enabled. */
- hicr = er32(HICR);
- if ((hicr & E1000_HICR_EN) == 0) {
- e_dbg("E1000_HOST_EN bit disabled.\n");
- return -E1000_ERR_HOST_INTERFACE_COMMAND;
- }
- /* check the previous command is completed */
- for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) {
- hicr = er32(HICR);
- if (!(hicr & E1000_HICR_C))
- break;
- mdelay(1);
- }
-
- if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) {
- e_dbg("Previous command timeout failed .\n");
- return -E1000_ERR_HOST_INTERFACE_COMMAND;
- }
-
- return 0;
-}
-
-/**
- * e1000e_check_mng_mode_generic - check management mode
- * @hw: pointer to the HW structure
- *
- * Reads the firmware semaphore register and returns true (>0) if
- * manageability is enabled, else false (0).
- **/
-bool e1000e_check_mng_mode_generic(struct e1000_hw *hw)
-{
- u32 fwsm = er32(FWSM);
-
- return (fwsm & E1000_FWSM_MODE_MASK) ==
- (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT);
-}
-
-/**
- * e1000e_enable_tx_pkt_filtering - Enable packet filtering on Tx
- * @hw: pointer to the HW structure
- *
- * Enables packet filtering on transmit packets if manageability is enabled
- * and host interface is enabled.
- **/
-bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw)
-{
- struct e1000_host_mng_dhcp_cookie *hdr = &hw->mng_cookie;
- u32 *buffer = (u32 *)&hw->mng_cookie;
- u32 offset;
- s32 ret_val, hdr_csum, csum;
- u8 i, len;
-
- hw->mac.tx_pkt_filtering = true;
-
- /* No manageability, no filtering */
- if (!e1000e_check_mng_mode(hw)) {
- hw->mac.tx_pkt_filtering = false;
- goto out;
- }
-
- /*
- * If we can't read from the host interface for whatever
- * reason, disable filtering.
- */
- ret_val = e1000_mng_enable_host_if(hw);
- if (ret_val) {
- hw->mac.tx_pkt_filtering = false;
- goto out;
- }
-
- /* Read in the header. Length and offset are in dwords. */
- len = E1000_MNG_DHCP_COOKIE_LENGTH >> 2;
- offset = E1000_MNG_DHCP_COOKIE_OFFSET >> 2;
- for (i = 0; i < len; i++)
- *(buffer + i) = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF, offset + i);
- hdr_csum = hdr->checksum;
- hdr->checksum = 0;
- csum = e1000_calculate_checksum((u8 *)hdr,
- E1000_MNG_DHCP_COOKIE_LENGTH);
- /*
- * If either the checksums or signature don't match, then
- * the cookie area isn't considered valid, in which case we
- * take the safe route of assuming Tx filtering is enabled.
- */
- if ((hdr_csum != csum) || (hdr->signature != E1000_IAMT_SIGNATURE)) {
- hw->mac.tx_pkt_filtering = true;
- goto out;
- }
-
- /* Cookie area is valid, make the final check for filtering. */
- if (!(hdr->status & E1000_MNG_DHCP_COOKIE_STATUS_PARSING)) {
- hw->mac.tx_pkt_filtering = false;
- goto out;
- }
-
-out:
- return hw->mac.tx_pkt_filtering;
-}
-
-/**
- * e1000_mng_write_cmd_header - Writes manageability command header
- * @hw: pointer to the HW structure
- * @hdr: pointer to the host interface command header
- *
- * Writes the command header after does the checksum calculation.
- **/
-static s32 e1000_mng_write_cmd_header(struct e1000_hw *hw,
- struct e1000_host_mng_command_header *hdr)
-{
- u16 i, length = sizeof(struct e1000_host_mng_command_header);
-
- /* Write the whole command header structure with new checksum. */
-
- hdr->checksum = e1000_calculate_checksum((u8 *)hdr, length);
-
- length >>= 2;
- /* Write the relevant command block into the ram area. */
- for (i = 0; i < length; i++) {
- E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, i,
- *((u32 *) hdr + i));
- e1e_flush();
- }
-
- return 0;
-}
-
-/**
- * e1000_mng_host_if_write - Write to the manageability host interface
- * @hw: pointer to the HW structure
- * @buffer: pointer to the host interface buffer
- * @length: size of the buffer
- * @offset: location in the buffer to write to
- * @sum: sum of the data (not checksum)
- *
- * This function writes the buffer content at the offset given on the host if.
- * It also does alignment considerations to do the writes in most efficient
- * way. Also fills up the sum of the buffer in *buffer parameter.
- **/
-static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer,
- u16 length, u16 offset, u8 *sum)
-{
- u8 *tmp;
- u8 *bufptr = buffer;
- u32 data = 0;
- u16 remaining, i, j, prev_bytes;
-
- /* sum = only sum of the data and it is not checksum */
-
- if (length == 0 || offset + length > E1000_HI_MAX_MNG_DATA_LENGTH)
- return -E1000_ERR_PARAM;
-
- tmp = (u8 *)&data;
- prev_bytes = offset & 0x3;
- offset >>= 2;
-
- if (prev_bytes) {
- data = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF, offset);
- for (j = prev_bytes; j < sizeof(u32); j++) {
- *(tmp + j) = *bufptr++;
- *sum += *(tmp + j);
- }
- E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset, data);
- length -= j - prev_bytes;
- offset++;
- }
-
- remaining = length & 0x3;
- length -= remaining;
-
- /* Calculate length in DWORDs */
- length >>= 2;
-
- /*
- * The device driver writes the relevant command block into the
- * ram area.
- */
- for (i = 0; i < length; i++) {
- for (j = 0; j < sizeof(u32); j++) {
- *(tmp + j) = *bufptr++;
- *sum += *(tmp + j);
- }
-
- E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset + i, data);
- }
- if (remaining) {
- for (j = 0; j < sizeof(u32); j++) {
- if (j < remaining)
- *(tmp + j) = *bufptr++;
- else
- *(tmp + j) = 0;
-
- *sum += *(tmp + j);
- }
- E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset + i, data);
- }
-
- return 0;
-}
-
-/**
- * e1000e_mng_write_dhcp_info - Writes DHCP info to host interface
- * @hw: pointer to the HW structure
- * @buffer: pointer to the host interface
- * @length: size of the buffer
- *
- * Writes the DHCP information to the host interface.
- **/
-s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length)
-{
- struct e1000_host_mng_command_header hdr;
- s32 ret_val;
- u32 hicr;
-
- hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD;
- hdr.command_length = length;
- hdr.reserved1 = 0;
- hdr.reserved2 = 0;
- hdr.checksum = 0;
-
- /* Enable the host interface */
- ret_val = e1000_mng_enable_host_if(hw);
- if (ret_val)
- return ret_val;
-
- /* Populate the host interface with the contents of "buffer". */
- ret_val = e1000_mng_host_if_write(hw, buffer, length,
- sizeof(hdr), &(hdr.checksum));
- if (ret_val)
- return ret_val;
-
- /* Write the manageability command header */
- ret_val = e1000_mng_write_cmd_header(hw, &hdr);
- if (ret_val)
- return ret_val;
-
- /* Tell the ARC a new command is pending. */
- hicr = er32(HICR);
- ew32(HICR, hicr | E1000_HICR_C);
-
- return 0;
-}
-
-/**
- * e1000e_enable_mng_pass_thru - Check if management passthrough is needed
- * @hw: pointer to the HW structure
- *
- * Verifies the hardware needs to leave interface enabled so that frames can
- * be directed to and from the management interface.
- **/
-bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw)
-{
- u32 manc;
- u32 fwsm, factps;
- bool ret_val = false;
-
- manc = er32(MANC);
-
- if (!(manc & E1000_MANC_RCV_TCO_EN))
- goto out;
-
- if (hw->mac.has_fwsm) {
- fwsm = er32(FWSM);
- factps = er32(FACTPS);
-
- if (!(factps & E1000_FACTPS_MNGCG) &&
- ((fwsm & E1000_FWSM_MODE_MASK) ==
- (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT))) {
- ret_val = true;
- goto out;
- }
- } else if ((hw->mac.type == e1000_82574) ||
- (hw->mac.type == e1000_82583)) {
- u16 data;
-
- factps = er32(FACTPS);
- e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &data);
-
- if (!(factps & E1000_FACTPS_MNGCG) &&
- ((data & E1000_NVM_INIT_CTRL2_MNGM) ==
- (e1000_mng_mode_pt << 13))) {
- ret_val = true;
- goto out;
- }
- } else if ((manc & E1000_MANC_SMBUS_EN) &&
- !(manc & E1000_MANC_ASF_EN)) {
- ret_val = true;
- goto out;
- }
-
-out:
- return ret_val;
}
diff --git a/drivers/net/ethernet/intel/e1000e/manage.c b/drivers/net/ethernet/intel/e1000e/manage.c
new file mode 100644
index 000000000000..473f8e711510
--- /dev/null
+++ b/drivers/net/ethernet/intel/e1000e/manage.c
@@ -0,0 +1,367 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2012 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "e1000.h"
+
+enum e1000_mng_mode {
+ e1000_mng_mode_none = 0,
+ e1000_mng_mode_asf,
+ e1000_mng_mode_pt,
+ e1000_mng_mode_ipmi,
+ e1000_mng_mode_host_if_only
+};
+
+#define E1000_FACTPS_MNGCG 0x20000000
+
+/* Intel(R) Active Management Technology signature */
+#define E1000_IAMT_SIGNATURE 0x544D4149
+
+/**
+ * e1000_calculate_checksum - Calculate checksum for buffer
+ * @buffer: pointer to EEPROM
+ * @length: size of EEPROM to calculate a checksum for
+ *
+ * Calculates the checksum for some buffer on a specified length. The
+ * checksum calculated is returned.
+ **/
+static u8 e1000_calculate_checksum(u8 *buffer, u32 length)
+{
+ u32 i;
+ u8 sum = 0;
+
+ if (!buffer)
+ return 0;
+
+ for (i = 0; i < length; i++)
+ sum += buffer[i];
+
+ return (u8)(0 - sum);
+}
+
+/**
+ * e1000_mng_enable_host_if - Checks host interface is enabled
+ * @hw: pointer to the HW structure
+ *
+ * Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND
+ *
+ * This function checks whether the HOST IF is enabled for command operation
+ * and also checks whether the previous command is completed. It busy waits
+ * in case of previous command is not completed.
+ **/
+static s32 e1000_mng_enable_host_if(struct e1000_hw *hw)
+{
+ u32 hicr;
+ u8 i;
+
+ if (!hw->mac.arc_subsystem_valid) {
+ e_dbg("ARC subsystem not valid.\n");
+ return -E1000_ERR_HOST_INTERFACE_COMMAND;
+ }
+
+ /* Check that the host interface is enabled. */
+ hicr = er32(HICR);
+ if ((hicr & E1000_HICR_EN) == 0) {
+ e_dbg("E1000_HOST_EN bit disabled.\n");
+ return -E1000_ERR_HOST_INTERFACE_COMMAND;
+ }
+ /* check the previous command is completed */
+ for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) {
+ hicr = er32(HICR);
+ if (!(hicr & E1000_HICR_C))
+ break;
+ mdelay(1);
+ }
+
+ if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) {
+ e_dbg("Previous command timeout failed .\n");
+ return -E1000_ERR_HOST_INTERFACE_COMMAND;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000e_check_mng_mode_generic - Generic check management mode
+ * @hw: pointer to the HW structure
+ *
+ * Reads the firmware semaphore register and returns true (>0) if
+ * manageability is enabled, else false (0).
+ **/
+bool e1000e_check_mng_mode_generic(struct e1000_hw *hw)
+{
+ u32 fwsm = er32(FWSM);
+
+ return (fwsm & E1000_FWSM_MODE_MASK) ==
+ (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT);
+}
+
+/**
+ * e1000e_enable_tx_pkt_filtering - Enable packet filtering on Tx
+ * @hw: pointer to the HW structure
+ *
+ * Enables packet filtering on transmit packets if manageability is enabled
+ * and host interface is enabled.
+ **/
+bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw)
+{
+ struct e1000_host_mng_dhcp_cookie *hdr = &hw->mng_cookie;
+ u32 *buffer = (u32 *)&hw->mng_cookie;
+ u32 offset;
+ s32 ret_val, hdr_csum, csum;
+ u8 i, len;
+
+ hw->mac.tx_pkt_filtering = true;
+
+ /* No manageability, no filtering */
+ if (!hw->mac.ops.check_mng_mode(hw)) {
+ hw->mac.tx_pkt_filtering = false;
+ return hw->mac.tx_pkt_filtering;
+ }
+
+ /*
+ * If we can't read from the host interface for whatever
+ * reason, disable filtering.
+ */
+ ret_val = e1000_mng_enable_host_if(hw);
+ if (ret_val) {
+ hw->mac.tx_pkt_filtering = false;
+ return hw->mac.tx_pkt_filtering;
+ }
+
+ /* Read in the header. Length and offset are in dwords. */
+ len = E1000_MNG_DHCP_COOKIE_LENGTH >> 2;
+ offset = E1000_MNG_DHCP_COOKIE_OFFSET >> 2;
+ for (i = 0; i < len; i++)
+ *(buffer + i) = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF,
+ offset + i);
+ hdr_csum = hdr->checksum;
+ hdr->checksum = 0;
+ csum = e1000_calculate_checksum((u8 *)hdr,
+ E1000_MNG_DHCP_COOKIE_LENGTH);
+ /*
+ * If either the checksums or signature don't match, then
+ * the cookie area isn't considered valid, in which case we
+ * take the safe route of assuming Tx filtering is enabled.
+ */
+ if ((hdr_csum != csum) || (hdr->signature != E1000_IAMT_SIGNATURE)) {
+ hw->mac.tx_pkt_filtering = true;
+ return hw->mac.tx_pkt_filtering;
+ }
+
+ /* Cookie area is valid, make the final check for filtering. */
+ if (!(hdr->status & E1000_MNG_DHCP_COOKIE_STATUS_PARSING))
+ hw->mac.tx_pkt_filtering = false;
+
+ return hw->mac.tx_pkt_filtering;
+}
+
+/**
+ * e1000_mng_write_cmd_header - Writes manageability command header
+ * @hw: pointer to the HW structure
+ * @hdr: pointer to the host interface command header
+ *
+ * Writes the command header after does the checksum calculation.
+ **/
+static s32 e1000_mng_write_cmd_header(struct e1000_hw *hw,
+ struct e1000_host_mng_command_header *hdr)
+{
+ u16 i, length = sizeof(struct e1000_host_mng_command_header);
+
+ /* Write the whole command header structure with new checksum. */
+
+ hdr->checksum = e1000_calculate_checksum((u8 *)hdr, length);
+
+ length >>= 2;
+ /* Write the relevant command block into the ram area. */
+ for (i = 0; i < length; i++) {
+ E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, i, *((u32 *)hdr + i));
+ e1e_flush();
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_mng_host_if_write - Write to the manageability host interface
+ * @hw: pointer to the HW structure
+ * @buffer: pointer to the host interface buffer
+ * @length: size of the buffer
+ * @offset: location in the buffer to write to
+ * @sum: sum of the data (not checksum)
+ *
+ * This function writes the buffer content at the offset given on the host if.
+ * It also does alignment considerations to do the writes in most efficient
+ * way. Also fills up the sum of the buffer in *buffer parameter.
+ **/
+static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer,
+ u16 length, u16 offset, u8 *sum)
+{
+ u8 *tmp;
+ u8 *bufptr = buffer;
+ u32 data = 0;
+ u16 remaining, i, j, prev_bytes;
+
+ /* sum = only sum of the data and it is not checksum */
+
+ if (length == 0 || offset + length > E1000_HI_MAX_MNG_DATA_LENGTH)
+ return -E1000_ERR_PARAM;
+
+ tmp = (u8 *)&data;
+ prev_bytes = offset & 0x3;
+ offset >>= 2;
+
+ if (prev_bytes) {
+ data = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF, offset);
+ for (j = prev_bytes; j < sizeof(u32); j++) {
+ *(tmp + j) = *bufptr++;
+ *sum += *(tmp + j);
+ }
+ E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset, data);
+ length -= j - prev_bytes;
+ offset++;
+ }
+
+ remaining = length & 0x3;
+ length -= remaining;
+
+ /* Calculate length in DWORDs */
+ length >>= 2;
+
+ /*
+ * The device driver writes the relevant command block into the
+ * ram area.
+ */
+ for (i = 0; i < length; i++) {
+ for (j = 0; j < sizeof(u32); j++) {
+ *(tmp + j) = *bufptr++;
+ *sum += *(tmp + j);
+ }
+
+ E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset + i, data);
+ }
+ if (remaining) {
+ for (j = 0; j < sizeof(u32); j++) {
+ if (j < remaining)
+ *(tmp + j) = *bufptr++;
+ else
+ *(tmp + j) = 0;
+
+ *sum += *(tmp + j);
+ }
+ E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset + i, data);
+ }
+
+ return 0;
+}
+
+/**
+ * e1000e_mng_write_dhcp_info - Writes DHCP info to host interface
+ * @hw: pointer to the HW structure
+ * @buffer: pointer to the host interface
+ * @length: size of the buffer
+ *
+ * Writes the DHCP information to the host interface.
+ **/
+s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length)
+{
+ struct e1000_host_mng_command_header hdr;
+ s32 ret_val;
+ u32 hicr;
+
+ hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD;
+ hdr.command_length = length;
+ hdr.reserved1 = 0;
+ hdr.reserved2 = 0;
+ hdr.checksum = 0;
+
+ /* Enable the host interface */
+ ret_val = e1000_mng_enable_host_if(hw);
+ if (ret_val)
+ return ret_val;
+
+ /* Populate the host interface with the contents of "buffer". */
+ ret_val = e1000_mng_host_if_write(hw, buffer, length,
+ sizeof(hdr), &(hdr.checksum));
+ if (ret_val)
+ return ret_val;
+
+ /* Write the manageability command header */
+ ret_val = e1000_mng_write_cmd_header(hw, &hdr);
+ if (ret_val)
+ return ret_val;
+
+ /* Tell the ARC a new command is pending. */
+ hicr = er32(HICR);
+ ew32(HICR, hicr | E1000_HICR_C);
+
+ return 0;
+}
+
+/**
+ * e1000e_enable_mng_pass_thru - Check if management passthrough is needed
+ * @hw: pointer to the HW structure
+ *
+ * Verifies the hardware needs to leave interface enabled so that frames can
+ * be directed to and from the management interface.
+ **/
+bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw)
+{
+ u32 manc;
+ u32 fwsm, factps;
+
+ manc = er32(MANC);
+
+ if (!(manc & E1000_MANC_RCV_TCO_EN))
+ return false;
+
+ if (hw->mac.has_fwsm) {
+ fwsm = er32(FWSM);
+ factps = er32(FACTPS);
+
+ if (!(factps & E1000_FACTPS_MNGCG) &&
+ ((fwsm & E1000_FWSM_MODE_MASK) ==
+ (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT)))
+ return true;
+ } else if ((hw->mac.type == e1000_82574) ||
+ (hw->mac.type == e1000_82583)) {
+ u16 data;
+
+ factps = er32(FACTPS);
+ e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &data);
+
+ if (!(factps & E1000_FACTPS_MNGCG) &&
+ ((data & E1000_NVM_INIT_CTRL2_MNGM) ==
+ (e1000_mng_mode_pt << 13)))
+ return true;
+ } else if ((manc & E1000_MANC_SMBUS_EN) &&
+ !(manc & E1000_MANC_ASF_EN)) {
+ return true;
+ }
+
+ return false;
+}
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 3911401ed65d..7152eb11b7b9 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -56,7 +56,7 @@
#define DRV_EXTRAVERSION "-k"
-#define DRV_VERSION "1.5.1" DRV_EXTRAVERSION
+#define DRV_VERSION "1.9.5" DRV_EXTRAVERSION
char e1000e_driver_name[] = "e1000e";
const char e1000e_driver_version[] = DRV_VERSION;
@@ -137,7 +137,7 @@ static const struct e1000_reg_info e1000_reg_info_tbl[] = {
{E1000_TDFPC, "TDFPC"},
/* List Terminator */
- {}
+ {0, NULL}
};
/*
@@ -183,18 +183,18 @@ static void e1000e_dump(struct e1000_adapter *adapter)
struct e1000_ring *tx_ring = adapter->tx_ring;
struct e1000_tx_desc *tx_desc;
struct my_u0 {
- u64 a;
- u64 b;
+ __le64 a;
+ __le64 b;
} *u0;
struct e1000_buffer *buffer_info;
struct e1000_ring *rx_ring = adapter->rx_ring;
union e1000_rx_desc_packet_split *rx_desc_ps;
union e1000_rx_desc_extended *rx_desc;
struct my_u1 {
- u64 a;
- u64 b;
- u64 c;
- u64 d;
+ __le64 a;
+ __le64 b;
+ __le64 c;
+ __le64 d;
} *u1;
u32 staterr;
int i = 0;
@@ -221,7 +221,7 @@ static void e1000e_dump(struct e1000_adapter *adapter)
/* Print Tx Ring Summary */
if (!netdev || !netif_running(netdev))
- goto exit;
+ return;
dev_info(&adapter->pdev->dev, "Tx Ring Summary\n");
pr_info("Queue [NTU] [NTC] [bi(ntc)->dma ] leng ntw timestamp\n");
@@ -308,7 +308,7 @@ rx_ring_summary:
/* Print Rx Ring */
if (!netif_msg_rx_status(adapter))
- goto exit;
+ return;
dev_info(&adapter->pdev->dev, "Rx Ring Dump\n");
switch (adapter->rx_ps_pages) {
@@ -449,9 +449,6 @@ rx_ring_summary:
}
}
}
-
-exit:
- return;
}
/**
@@ -487,22 +484,27 @@ static void e1000_receive_skb(struct e1000_adapter *adapter,
/**
* e1000_rx_checksum - Receive Checksum Offload
- * @adapter: board private structure
- * @status_err: receive descriptor status and error fields
- * @csum: receive descriptor csum field
- * @sk_buff: socket buffer with received data
+ * @adapter: board private structure
+ * @status_err: receive descriptor status and error fields
+ * @csum: receive descriptor csum field
+ * @sk_buff: socket buffer with received data
**/
static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
- u32 csum, struct sk_buff *skb)
+ __le16 csum, struct sk_buff *skb)
{
u16 status = (u16)status_err;
u8 errors = (u8)(status_err >> 24);
skb_checksum_none_assert(skb);
+ /* Rx checksum disabled */
+ if (!(adapter->netdev->features & NETIF_F_RXCSUM))
+ return;
+
/* Ignore Checksum bit is set */
if (status & E1000_RXD_STAT_IXSM)
return;
+
/* TCP/UDP checksum error bit is set */
if (errors & E1000_RXD_ERR_TCPE) {
/* let the stack verify checksum errors */
@@ -524,7 +526,7 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
* Hardware complements the payload checksum, so we undo it
* and then put the value in host order for further stack use.
*/
- __sum16 sum = (__force __sum16)htons(csum);
+ __sum16 sum = (__force __sum16)swab16((__force u16)csum);
skb->csum = csum_unfold(~sum);
skb->ip_summed = CHECKSUM_COMPLETE;
}
@@ -545,7 +547,7 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
* which has bit 24 set while ME is accessing Host CSR registers, wait
* if it is set and try again a number of times.
**/
-static inline s32 e1000e_update_tail_wa(struct e1000_hw *hw, u8 __iomem * tail,
+static inline s32 e1000e_update_tail_wa(struct e1000_hw *hw, void __iomem *tail,
unsigned int i)
{
unsigned int j = 0;
@@ -562,12 +564,12 @@ static inline s32 e1000e_update_tail_wa(struct e1000_hw *hw, u8 __iomem * tail,
return 0;
}
-static void e1000e_update_rdt_wa(struct e1000_adapter *adapter, unsigned int i)
+static void e1000e_update_rdt_wa(struct e1000_ring *rx_ring, unsigned int i)
{
- u8 __iomem *tail = (adapter->hw.hw_addr + adapter->rx_ring->tail);
+ struct e1000_adapter *adapter = rx_ring->adapter;
struct e1000_hw *hw = &adapter->hw;
- if (e1000e_update_tail_wa(hw, tail, i)) {
+ if (e1000e_update_tail_wa(hw, rx_ring->tail, i)) {
u32 rctl = er32(RCTL);
ew32(RCTL, rctl & ~E1000_RCTL_EN);
e_err("ME firmware caused invalid RDT - resetting\n");
@@ -575,12 +577,12 @@ static void e1000e_update_rdt_wa(struct e1000_adapter *adapter, unsigned int i)
}
}
-static void e1000e_update_tdt_wa(struct e1000_adapter *adapter, unsigned int i)
+static void e1000e_update_tdt_wa(struct e1000_ring *tx_ring, unsigned int i)
{
- u8 __iomem *tail = (adapter->hw.hw_addr + adapter->tx_ring->tail);
+ struct e1000_adapter *adapter = tx_ring->adapter;
struct e1000_hw *hw = &adapter->hw;
- if (e1000e_update_tail_wa(hw, tail, i)) {
+ if (e1000e_update_tail_wa(hw, tx_ring->tail, i)) {
u32 tctl = er32(TCTL);
ew32(TCTL, tctl & ~E1000_TCTL_EN);
e_err("ME firmware caused invalid TDT - resetting\n");
@@ -590,14 +592,14 @@ static void e1000e_update_tdt_wa(struct e1000_adapter *adapter, unsigned int i)
/**
* e1000_alloc_rx_buffers - Replace used receive buffers
- * @adapter: address of board private structure
+ * @rx_ring: Rx descriptor ring
**/
-static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
+static void e1000_alloc_rx_buffers(struct e1000_ring *rx_ring,
int cleaned_count, gfp_t gfp)
{
+ struct e1000_adapter *adapter = rx_ring->adapter;
struct net_device *netdev = adapter->netdev;
struct pci_dev *pdev = adapter->pdev;
- struct e1000_ring *rx_ring = adapter->rx_ring;
union e1000_rx_desc_extended *rx_desc;
struct e1000_buffer *buffer_info;
struct sk_buff *skb;
@@ -644,9 +646,9 @@ map_skb:
*/
wmb();
if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
- e1000e_update_rdt_wa(adapter, i);
+ e1000e_update_rdt_wa(rx_ring, i);
else
- writel(i, adapter->hw.hw_addr + rx_ring->tail);
+ writel(i, rx_ring->tail);
}
i++;
if (i == rx_ring->count)
@@ -659,15 +661,15 @@ map_skb:
/**
* e1000_alloc_rx_buffers_ps - Replace used receive buffers; packet split
- * @adapter: address of board private structure
+ * @rx_ring: Rx descriptor ring
**/
-static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
+static void e1000_alloc_rx_buffers_ps(struct e1000_ring *rx_ring,
int cleaned_count, gfp_t gfp)
{
+ struct e1000_adapter *adapter = rx_ring->adapter;
struct net_device *netdev = adapter->netdev;
struct pci_dev *pdev = adapter->pdev;
union e1000_rx_desc_packet_split *rx_desc;
- struct e1000_ring *rx_ring = adapter->rx_ring;
struct e1000_buffer *buffer_info;
struct e1000_ps_page *ps_page;
struct sk_buff *skb;
@@ -747,10 +749,9 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
*/
wmb();
if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
- e1000e_update_rdt_wa(adapter, i << 1);
+ e1000e_update_rdt_wa(rx_ring, i << 1);
else
- writel(i << 1,
- adapter->hw.hw_addr + rx_ring->tail);
+ writel(i << 1, rx_ring->tail);
}
i++;
@@ -765,17 +766,17 @@ no_buffers:
/**
* e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers
- * @adapter: address of board private structure
+ * @rx_ring: Rx descriptor ring
* @cleaned_count: number of buffers to allocate this pass
**/
-static void e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter,
+static void e1000_alloc_jumbo_rx_buffers(struct e1000_ring *rx_ring,
int cleaned_count, gfp_t gfp)
{
+ struct e1000_adapter *adapter = rx_ring->adapter;
struct net_device *netdev = adapter->netdev;
struct pci_dev *pdev = adapter->pdev;
union e1000_rx_desc_extended *rx_desc;
- struct e1000_ring *rx_ring = adapter->rx_ring;
struct e1000_buffer *buffer_info;
struct sk_buff *skb;
unsigned int i;
@@ -834,26 +835,33 @@ check_page:
* such as IA-64). */
wmb();
if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
- e1000e_update_rdt_wa(adapter, i);
+ e1000e_update_rdt_wa(rx_ring, i);
else
- writel(i, adapter->hw.hw_addr + rx_ring->tail);
+ writel(i, rx_ring->tail);
}
}
+static inline void e1000_rx_hash(struct net_device *netdev, __le32 rss,
+ struct sk_buff *skb)
+{
+ if (netdev->features & NETIF_F_RXHASH)
+ skb->rxhash = le32_to_cpu(rss);
+}
+
/**
- * e1000_clean_rx_irq - Send received data up the network stack; legacy
- * @adapter: board private structure
+ * e1000_clean_rx_irq - Send received data up the network stack
+ * @rx_ring: Rx descriptor ring
*
* the return value indicates whether actual cleaning was done, there
* is no guarantee that everything was cleaned
**/
-static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
- int *work_done, int work_to_do)
+static bool e1000_clean_rx_irq(struct e1000_ring *rx_ring, int *work_done,
+ int work_to_do)
{
+ struct e1000_adapter *adapter = rx_ring->adapter;
struct net_device *netdev = adapter->netdev;
struct pci_dev *pdev = adapter->pdev;
struct e1000_hw *hw = &adapter->hw;
- struct e1000_ring *rx_ring = adapter->rx_ring;
union e1000_rx_desc_extended *rx_desc, *next_rxd;
struct e1000_buffer *buffer_info, *next_buffer;
u32 length, staterr;
@@ -918,15 +926,24 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
goto next_desc;
}
- if (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) {
+ if (unlikely((staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) &&
+ !(netdev->features & NETIF_F_RXALL))) {
/* recycle */
buffer_info->skb = skb;
goto next_desc;
}
/* adjust length to remove Ethernet CRC */
- if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
- length -= 4;
+ if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) {
+ /* If configured to store CRC, don't subtract FCS,
+ * but keep the FCS bytes out of the total_rx_bytes
+ * counter
+ */
+ if (netdev->features & NETIF_F_RXFCS)
+ total_rx_bytes -= 4;
+ else
+ length -= 4;
+ }
total_rx_bytes += length;
total_rx_packets++;
@@ -957,8 +974,9 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
/* Receive Checksum Offload */
e1000_rx_checksum(adapter, staterr,
- le16_to_cpu(rx_desc->wb.lower.hi_dword.
- csum_ip.csum), skb);
+ rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
+
+ e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
e1000_receive_skb(adapter, netdev, skb, staterr,
rx_desc->wb.upper.vlan);
@@ -968,7 +986,7 @@ next_desc:
/* return some buffers to hardware, one at a time is too slow */
if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
- adapter->alloc_rx_buf(adapter, cleaned_count,
+ adapter->alloc_rx_buf(rx_ring, cleaned_count,
GFP_ATOMIC);
cleaned_count = 0;
}
@@ -983,16 +1001,18 @@ next_desc:
cleaned_count = e1000_desc_unused(rx_ring);
if (cleaned_count)
- adapter->alloc_rx_buf(adapter, cleaned_count, GFP_ATOMIC);
+ adapter->alloc_rx_buf(rx_ring, cleaned_count, GFP_ATOMIC);
adapter->total_rx_bytes += total_rx_bytes;
adapter->total_rx_packets += total_rx_packets;
return cleaned;
}
-static void e1000_put_txbuf(struct e1000_adapter *adapter,
- struct e1000_buffer *buffer_info)
+static void e1000_put_txbuf(struct e1000_ring *tx_ring,
+ struct e1000_buffer *buffer_info)
{
+ struct e1000_adapter *adapter = tx_ring->adapter;
+
if (buffer_info->dma) {
if (buffer_info->mapped_as_page)
dma_unmap_page(&adapter->pdev->dev, buffer_info->dma,
@@ -1063,8 +1083,8 @@ static void e1000_print_hw_hang(struct work_struct *work)
"PHY 1000BASE-T Status <%x>\n"
"PHY Extended Status <%x>\n"
"PCI Status <%x>\n",
- readl(adapter->hw.hw_addr + tx_ring->head),
- readl(adapter->hw.hw_addr + tx_ring->tail),
+ readl(tx_ring->head),
+ readl(tx_ring->tail),
tx_ring->next_to_use,
tx_ring->next_to_clean,
tx_ring->buffer_info[eop].time_stamp,
@@ -1080,16 +1100,16 @@ static void e1000_print_hw_hang(struct work_struct *work)
/**
* e1000_clean_tx_irq - Reclaim resources after transmit completes
- * @adapter: board private structure
+ * @tx_ring: Tx descriptor ring
*
* the return value indicates whether actual cleaning was done, there
* is no guarantee that everything was cleaned
**/
-static bool e1000_clean_tx_irq(struct e1000_adapter *adapter)
+static bool e1000_clean_tx_irq(struct e1000_ring *tx_ring)
{
+ struct e1000_adapter *adapter = tx_ring->adapter;
struct net_device *netdev = adapter->netdev;
struct e1000_hw *hw = &adapter->hw;
- struct e1000_ring *tx_ring = adapter->tx_ring;
struct e1000_tx_desc *tx_desc, *eop_desc;
struct e1000_buffer *buffer_info;
unsigned int i, eop;
@@ -1119,7 +1139,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter)
}
}
- e1000_put_txbuf(adapter, buffer_info);
+ e1000_put_txbuf(tx_ring, buffer_info);
tx_desc->upper.data = 0;
i++;
@@ -1173,19 +1193,19 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter)
/**
* e1000_clean_rx_irq_ps - Send received data up the network stack; packet split
- * @adapter: board private structure
+ * @rx_ring: Rx descriptor ring
*
* the return value indicates whether actual cleaning was done, there
* is no guarantee that everything was cleaned
**/
-static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
- int *work_done, int work_to_do)
+static bool e1000_clean_rx_irq_ps(struct e1000_ring *rx_ring, int *work_done,
+ int work_to_do)
{
+ struct e1000_adapter *adapter = rx_ring->adapter;
struct e1000_hw *hw = &adapter->hw;
union e1000_rx_desc_packet_split *rx_desc, *next_rxd;
struct net_device *netdev = adapter->netdev;
struct pci_dev *pdev = adapter->pdev;
- struct e1000_ring *rx_ring = adapter->rx_ring;
struct e1000_buffer *buffer_info, *next_buffer;
struct e1000_ps_page *ps_page;
struct sk_buff *skb;
@@ -1236,7 +1256,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
goto next_desc;
}
- if (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) {
+ if (unlikely((staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) &&
+ !(netdev->features & NETIF_F_RXALL))) {
dev_kfree_skb_irq(skb);
goto next_desc;
}
@@ -1253,43 +1274,50 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
skb_put(skb, length);
{
- /*
- * this looks ugly, but it seems compiler issues make it
- * more efficient than reusing j
- */
- int l1 = le16_to_cpu(rx_desc->wb.upper.length[0]);
-
- /*
- * page alloc/put takes too long and effects small packet
- * throughput, so unsplit small packets and save the alloc/put
- * only valid in softirq (napi) context to call kmap_*
- */
- if (l1 && (l1 <= copybreak) &&
- ((length + l1) <= adapter->rx_ps_bsize0)) {
- u8 *vaddr;
-
- ps_page = &buffer_info->ps_pages[0];
+ /*
+ * this looks ugly, but it seems compiler issues make
+ * it more efficient than reusing j
+ */
+ int l1 = le16_to_cpu(rx_desc->wb.upper.length[0]);
/*
- * there is no documentation about how to call
- * kmap_atomic, so we can't hold the mapping
- * very long
+ * page alloc/put takes too long and effects small
+ * packet throughput, so unsplit small packets and
+ * save the alloc/put only valid in softirq (napi)
+ * context to call kmap_*
*/
- dma_sync_single_for_cpu(&pdev->dev, ps_page->dma,
- PAGE_SIZE, DMA_FROM_DEVICE);
- vaddr = kmap_atomic(ps_page->page, KM_SKB_DATA_SOFTIRQ);
- memcpy(skb_tail_pointer(skb), vaddr, l1);
- kunmap_atomic(vaddr, KM_SKB_DATA_SOFTIRQ);
- dma_sync_single_for_device(&pdev->dev, ps_page->dma,
- PAGE_SIZE, DMA_FROM_DEVICE);
-
- /* remove the CRC */
- if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
- l1 -= 4;
-
- skb_put(skb, l1);
- goto copydone;
- } /* if */
+ if (l1 && (l1 <= copybreak) &&
+ ((length + l1) <= adapter->rx_ps_bsize0)) {
+ u8 *vaddr;
+
+ ps_page = &buffer_info->ps_pages[0];
+
+ /*
+ * there is no documentation about how to call
+ * kmap_atomic, so we can't hold the mapping
+ * very long
+ */
+ dma_sync_single_for_cpu(&pdev->dev,
+ ps_page->dma,
+ PAGE_SIZE,
+ DMA_FROM_DEVICE);
+ vaddr = kmap_atomic(ps_page->page);
+ memcpy(skb_tail_pointer(skb), vaddr, l1);
+ kunmap_atomic(vaddr);
+ dma_sync_single_for_device(&pdev->dev,
+ ps_page->dma,
+ PAGE_SIZE,
+ DMA_FROM_DEVICE);
+
+ /* remove the CRC */
+ if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) {
+ if (!(netdev->features & NETIF_F_RXFCS))
+ l1 -= 4;
+ }
+
+ skb_put(skb, l1);
+ goto copydone;
+ } /* if */
}
for (j = 0; j < PS_PAGE_BUFFERS; j++) {
@@ -1311,15 +1339,19 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
/* strip the ethernet crc, problem is we're using pages now so
* this whole operation can get a little cpu intensive
*/
- if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
- pskb_trim(skb, skb->len - 4);
+ if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) {
+ if (!(netdev->features & NETIF_F_RXFCS))
+ pskb_trim(skb, skb->len - 4);
+ }
copydone:
total_rx_bytes += skb->len;
total_rx_packets++;
- e1000_rx_checksum(adapter, staterr, le16_to_cpu(
- rx_desc->wb.lower.hi_dword.csum_ip.csum), skb);
+ e1000_rx_checksum(adapter, staterr,
+ rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
+
+ e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
if (rx_desc->wb.upper.header_status &
cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP))
@@ -1334,7 +1366,7 @@ next_desc:
/* return some buffers to hardware, one at a time is too slow */
if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
- adapter->alloc_rx_buf(adapter, cleaned_count,
+ adapter->alloc_rx_buf(rx_ring, cleaned_count,
GFP_ATOMIC);
cleaned_count = 0;
}
@@ -1349,7 +1381,7 @@ next_desc:
cleaned_count = e1000_desc_unused(rx_ring);
if (cleaned_count)
- adapter->alloc_rx_buf(adapter, cleaned_count, GFP_ATOMIC);
+ adapter->alloc_rx_buf(rx_ring, cleaned_count, GFP_ATOMIC);
adapter->total_rx_bytes += total_rx_bytes;
adapter->total_rx_packets += total_rx_packets;
@@ -1375,13 +1407,12 @@ static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb,
* the return value indicates whether actual cleaning was done, there
* is no guarantee that everything was cleaned
**/
-
-static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
- int *work_done, int work_to_do)
+static bool e1000_clean_jumbo_rx_irq(struct e1000_ring *rx_ring, int *work_done,
+ int work_to_do)
{
+ struct e1000_adapter *adapter = rx_ring->adapter;
struct net_device *netdev = adapter->netdev;
struct pci_dev *pdev = adapter->pdev;
- struct e1000_ring *rx_ring = adapter->rx_ring;
union e1000_rx_desc_extended *rx_desc, *next_rxd;
struct e1000_buffer *buffer_info, *next_buffer;
u32 length, staterr;
@@ -1424,7 +1455,8 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
/* errors is only valid for DD + EOP descriptors */
if (unlikely((staterr & E1000_RXD_STAT_EOP) &&
- (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK))) {
+ ((staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) &&
+ !(netdev->features & NETIF_F_RXALL)))) {
/* recycle both page and skb */
buffer_info->skb = skb;
/* an error means any chain goes out the window too */
@@ -1470,12 +1502,10 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
if (length <= copybreak &&
skb_tailroom(skb) >= length) {
u8 *vaddr;
- vaddr = kmap_atomic(buffer_info->page,
- KM_SKB_DATA_SOFTIRQ);
+ vaddr = kmap_atomic(buffer_info->page);
memcpy(skb_tail_pointer(skb), vaddr,
length);
- kunmap_atomic(vaddr,
- KM_SKB_DATA_SOFTIRQ);
+ kunmap_atomic(vaddr);
/* re-use the page, so don't erase
* buffer_info->page */
skb_put(skb, length);
@@ -1491,8 +1521,9 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
/* Receive Checksum Offload XXX recompute due to CRC strip? */
e1000_rx_checksum(adapter, staterr,
- le16_to_cpu(rx_desc->wb.lower.hi_dword.
- csum_ip.csum), skb);
+ rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
+
+ e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
/* probably a little skewed due to removing CRC */
total_rx_bytes += skb->len;
@@ -1513,7 +1544,7 @@ next_desc:
/* return some buffers to hardware, one at a time is too slow */
if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
- adapter->alloc_rx_buf(adapter, cleaned_count,
+ adapter->alloc_rx_buf(rx_ring, cleaned_count,
GFP_ATOMIC);
cleaned_count = 0;
}
@@ -1528,7 +1559,7 @@ next_desc:
cleaned_count = e1000_desc_unused(rx_ring);
if (cleaned_count)
- adapter->alloc_rx_buf(adapter, cleaned_count, GFP_ATOMIC);
+ adapter->alloc_rx_buf(rx_ring, cleaned_count, GFP_ATOMIC);
adapter->total_rx_bytes += total_rx_bytes;
adapter->total_rx_packets += total_rx_packets;
@@ -1537,11 +1568,11 @@ next_desc:
/**
* e1000_clean_rx_ring - Free Rx Buffers per Queue
- * @adapter: board private structure
+ * @rx_ring: Rx descriptor ring
**/
-static void e1000_clean_rx_ring(struct e1000_adapter *adapter)
+static void e1000_clean_rx_ring(struct e1000_ring *rx_ring)
{
- struct e1000_ring *rx_ring = adapter->rx_ring;
+ struct e1000_adapter *adapter = rx_ring->adapter;
struct e1000_buffer *buffer_info;
struct e1000_ps_page *ps_page;
struct pci_dev *pdev = adapter->pdev;
@@ -1601,8 +1632,8 @@ static void e1000_clean_rx_ring(struct e1000_adapter *adapter)
rx_ring->next_to_use = 0;
adapter->flags2 &= ~FLAG2_IS_DISCARDING;
- writel(0, adapter->hw.hw_addr + rx_ring->head);
- writel(0, adapter->hw.hw_addr + rx_ring->tail);
+ writel(0, rx_ring->head);
+ writel(0, rx_ring->tail);
}
static void e1000e_downshift_workaround(struct work_struct *work)
@@ -1633,7 +1664,7 @@ static irqreturn_t e1000_intr_msi(int irq, void *data)
*/
if (icr & E1000_ICR_LSC) {
- hw->mac.get_link_status = 1;
+ hw->mac.get_link_status = true;
/*
* ICH8 workaround-- Call gig speed drop workaround on cable
* disconnect (LSC) before accessing any PHY registers
@@ -1699,7 +1730,7 @@ static irqreturn_t e1000_intr(int irq, void *data)
*/
if (icr & E1000_ICR_LSC) {
- hw->mac.get_link_status = 1;
+ hw->mac.get_link_status = true;
/*
* ICH8 workaround-- Call gig speed drop workaround on cable
* disconnect (LSC) before accessing any PHY registers
@@ -1756,7 +1787,7 @@ static irqreturn_t e1000_msix_other(int irq, void *data)
if (icr & E1000_ICR_OTHER) {
if (!(icr & E1000_ICR_LSC))
goto no_link_interrupt;
- hw->mac.get_link_status = 1;
+ hw->mac.get_link_status = true;
/* guard against interrupt when we're going down */
if (!test_bit(__E1000_DOWN, &adapter->state))
mod_timer(&adapter->watchdog_timer, jiffies + 1);
@@ -1781,7 +1812,7 @@ static irqreturn_t e1000_intr_msix_tx(int irq, void *data)
adapter->total_tx_bytes = 0;
adapter->total_tx_packets = 0;
- if (!e1000_clean_tx_irq(adapter))
+ if (!e1000_clean_tx_irq(tx_ring))
/* Ring was not completely cleaned, so fire another interrupt */
ew32(ICS, tx_ring->ims_val);
@@ -1792,14 +1823,15 @@ static irqreturn_t e1000_intr_msix_rx(int irq, void *data)
{
struct net_device *netdev = data;
struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_ring *rx_ring = adapter->rx_ring;
/* Write the ITR value calculated at the end of the
* previous interrupt.
*/
- if (adapter->rx_ring->set_itr) {
- writel(1000000000 / (adapter->rx_ring->itr_val * 256),
- adapter->hw.hw_addr + adapter->rx_ring->itr_register);
- adapter->rx_ring->set_itr = 0;
+ if (rx_ring->set_itr) {
+ writel(1000000000 / (rx_ring->itr_val * 256),
+ rx_ring->itr_register);
+ rx_ring->set_itr = 0;
}
if (napi_schedule_prep(&adapter->napi)) {
@@ -1839,9 +1871,9 @@ static void e1000_configure_msix(struct e1000_adapter *adapter)
adapter->eiac_mask |= rx_ring->ims_val;
if (rx_ring->itr_val)
writel(1000000000 / (rx_ring->itr_val * 256),
- hw->hw_addr + rx_ring->itr_register);
+ rx_ring->itr_register);
else
- writel(1, hw->hw_addr + rx_ring->itr_register);
+ writel(1, rx_ring->itr_register);
ivar = E1000_IVAR_INT_ALLOC_VALID | vector;
/* Configure Tx vector */
@@ -1849,9 +1881,9 @@ static void e1000_configure_msix(struct e1000_adapter *adapter)
vector++;
if (tx_ring->itr_val)
writel(1000000000 / (tx_ring->itr_val * 256),
- hw->hw_addr + tx_ring->itr_register);
+ tx_ring->itr_register);
else
- writel(1, hw->hw_addr + tx_ring->itr_register);
+ writel(1, tx_ring->itr_register);
adapter->eiac_mask |= tx_ring->ims_val;
ivar |= ((E1000_IVAR_INT_ALLOC_VALID | vector) << 8);
@@ -1965,8 +1997,9 @@ static int e1000_request_msix(struct e1000_adapter *adapter)
e1000_intr_msix_rx, 0, adapter->rx_ring->name,
netdev);
if (err)
- goto out;
- adapter->rx_ring->itr_register = E1000_EITR_82574(vector);
+ return err;
+ adapter->rx_ring->itr_register = adapter->hw.hw_addr +
+ E1000_EITR_82574(vector);
adapter->rx_ring->itr_val = adapter->itr;
vector++;
@@ -1980,20 +2013,20 @@ static int e1000_request_msix(struct e1000_adapter *adapter)
e1000_intr_msix_tx, 0, adapter->tx_ring->name,
netdev);
if (err)
- goto out;
- adapter->tx_ring->itr_register = E1000_EITR_82574(vector);
+ return err;
+ adapter->tx_ring->itr_register = adapter->hw.hw_addr +
+ E1000_EITR_82574(vector);
adapter->tx_ring->itr_val = adapter->itr;
vector++;
err = request_irq(adapter->msix_entries[vector].vector,
e1000_msix_other, 0, netdev->name, netdev);
if (err)
- goto out;
+ return err;
e1000_configure_msix(adapter);
+
return 0;
-out:
- return err;
}
/**
@@ -2162,13 +2195,13 @@ static int e1000_alloc_ring_dma(struct e1000_adapter *adapter,
/**
* e1000e_setup_tx_resources - allocate Tx resources (Descriptors)
- * @adapter: board private structure
+ * @tx_ring: Tx descriptor ring
*
* Return 0 on success, negative on failure
**/
-int e1000e_setup_tx_resources(struct e1000_adapter *adapter)
+int e1000e_setup_tx_resources(struct e1000_ring *tx_ring)
{
- struct e1000_ring *tx_ring = adapter->tx_ring;
+ struct e1000_adapter *adapter = tx_ring->adapter;
int err = -ENOMEM, size;
size = sizeof(struct e1000_buffer) * tx_ring->count;
@@ -2196,13 +2229,13 @@ err:
/**
* e1000e_setup_rx_resources - allocate Rx resources (Descriptors)
- * @adapter: board private structure
+ * @rx_ring: Rx descriptor ring
*
* Returns 0 on success, negative on failure
**/
-int e1000e_setup_rx_resources(struct e1000_adapter *adapter)
+int e1000e_setup_rx_resources(struct e1000_ring *rx_ring)
{
- struct e1000_ring *rx_ring = adapter->rx_ring;
+ struct e1000_adapter *adapter = rx_ring->adapter;
struct e1000_buffer *buffer_info;
int i, size, desc_len, err = -ENOMEM;
@@ -2249,18 +2282,18 @@ err:
/**
* e1000_clean_tx_ring - Free Tx Buffers
- * @adapter: board private structure
+ * @tx_ring: Tx descriptor ring
**/
-static void e1000_clean_tx_ring(struct e1000_adapter *adapter)
+static void e1000_clean_tx_ring(struct e1000_ring *tx_ring)
{
- struct e1000_ring *tx_ring = adapter->tx_ring;
+ struct e1000_adapter *adapter = tx_ring->adapter;
struct e1000_buffer *buffer_info;
unsigned long size;
unsigned int i;
for (i = 0; i < tx_ring->count; i++) {
buffer_info = &tx_ring->buffer_info[i];
- e1000_put_txbuf(adapter, buffer_info);
+ e1000_put_txbuf(tx_ring, buffer_info);
}
netdev_reset_queue(adapter->netdev);
@@ -2272,22 +2305,22 @@ static void e1000_clean_tx_ring(struct e1000_adapter *adapter)
tx_ring->next_to_use = 0;
tx_ring->next_to_clean = 0;
- writel(0, adapter->hw.hw_addr + tx_ring->head);
- writel(0, adapter->hw.hw_addr + tx_ring->tail);
+ writel(0, tx_ring->head);
+ writel(0, tx_ring->tail);
}
/**
* e1000e_free_tx_resources - Free Tx Resources per Queue
- * @adapter: board private structure
+ * @tx_ring: Tx descriptor ring
*
* Free all transmit software resources
**/
-void e1000e_free_tx_resources(struct e1000_adapter *adapter)
+void e1000e_free_tx_resources(struct e1000_ring *tx_ring)
{
+ struct e1000_adapter *adapter = tx_ring->adapter;
struct pci_dev *pdev = adapter->pdev;
- struct e1000_ring *tx_ring = adapter->tx_ring;
- e1000_clean_tx_ring(adapter);
+ e1000_clean_tx_ring(tx_ring);
vfree(tx_ring->buffer_info);
tx_ring->buffer_info = NULL;
@@ -2299,18 +2332,17 @@ void e1000e_free_tx_resources(struct e1000_adapter *adapter)
/**
* e1000e_free_rx_resources - Free Rx Resources
- * @adapter: board private structure
+ * @rx_ring: Rx descriptor ring
*
* Free all receive software resources
**/
-
-void e1000e_free_rx_resources(struct e1000_adapter *adapter)
+void e1000e_free_rx_resources(struct e1000_ring *rx_ring)
{
+ struct e1000_adapter *adapter = rx_ring->adapter;
struct pci_dev *pdev = adapter->pdev;
- struct e1000_ring *rx_ring = adapter->rx_ring;
int i;
- e1000_clean_rx_ring(adapter);
+ e1000_clean_rx_ring(rx_ring);
for (i = 0; i < rx_ring->count; i++)
kfree(rx_ring->buffer_info[i].ps_pages);
@@ -2346,7 +2378,7 @@ static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
unsigned int retval = itr_setting;
if (packets == 0)
- goto update_itr_done;
+ return itr_setting;
switch (itr_setting) {
case lowest_latency:
@@ -2381,7 +2413,6 @@ static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
break;
}
-update_itr_done:
return retval;
}
@@ -2464,13 +2495,19 @@ set_itr_now:
**/
static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter)
{
- adapter->tx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
+ int size = sizeof(struct e1000_ring);
+
+ adapter->tx_ring = kzalloc(size, GFP_KERNEL);
if (!adapter->tx_ring)
goto err;
+ adapter->tx_ring->count = adapter->tx_ring_count;
+ adapter->tx_ring->adapter = adapter;
- adapter->rx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
+ adapter->rx_ring = kzalloc(size, GFP_KERNEL);
if (!adapter->rx_ring)
goto err;
+ adapter->rx_ring->count = adapter->rx_ring_count;
+ adapter->rx_ring->adapter = adapter;
return 0;
err:
@@ -2498,10 +2535,10 @@ static int e1000_clean(struct napi_struct *napi, int budget)
!(adapter->rx_ring->ims_val & adapter->tx_ring->ims_val))
goto clean_rx;
- tx_cleaned = e1000_clean_tx_irq(adapter);
+ tx_cleaned = e1000_clean_tx_irq(adapter->tx_ring);
clean_rx:
- adapter->clean_rx(adapter, &work_done, budget);
+ adapter->clean_rx(adapter->rx_ring, &work_done, budget);
if (!tx_cleaned)
work_done = budget;
@@ -2746,8 +2783,7 @@ static void e1000_configure_tx(struct e1000_adapter *adapter)
struct e1000_hw *hw = &adapter->hw;
struct e1000_ring *tx_ring = adapter->tx_ring;
u64 tdba;
- u32 tdlen, tctl, tipg, tarc;
- u32 ipgr1, ipgr2;
+ u32 tdlen, tarc;
/* Setup the HW Tx Head and Tail descriptor pointers */
tdba = tx_ring->dma;
@@ -2757,20 +2793,8 @@ static void e1000_configure_tx(struct e1000_adapter *adapter)
ew32(TDLEN, tdlen);
ew32(TDH, 0);
ew32(TDT, 0);
- tx_ring->head = E1000_TDH;
- tx_ring->tail = E1000_TDT;
-
- /* Set the default values for the Tx Inter Packet Gap timer */
- tipg = DEFAULT_82543_TIPG_IPGT_COPPER; /* 8 */
- ipgr1 = DEFAULT_82543_TIPG_IPGR1; /* 8 */
- ipgr2 = DEFAULT_82543_TIPG_IPGR2; /* 6 */
-
- if (adapter->flags & FLAG_TIPG_MEDIUM_FOR_80003ESLAN)
- ipgr2 = DEFAULT_80003ES2LAN_TIPG_IPGR2; /* 7 */
-
- tipg |= ipgr1 << E1000_TIPG_IPGR1_SHIFT;
- tipg |= ipgr2 << E1000_TIPG_IPGR2_SHIFT;
- ew32(TIPG, tipg);
+ tx_ring->head = adapter->hw.hw_addr + E1000_TDH;
+ tx_ring->tail = adapter->hw.hw_addr + E1000_TDT;
/* Set the Tx Interrupt Delay register */
ew32(TIDV, adapter->tx_int_delay);
@@ -2793,15 +2817,9 @@ static void e1000_configure_tx(struct e1000_adapter *adapter)
*/
txdctl |= E1000_TXDCTL_DMA_BURST_ENABLE;
ew32(TXDCTL(0), txdctl);
- /* erratum work around: set txdctl the same for both queues */
- ew32(TXDCTL(1), txdctl);
}
-
- /* Program the Transmit Control Register */
- tctl = er32(TCTL);
- tctl &= ~E1000_TCTL_CT;
- tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
- (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
+ /* erratum work around: set txdctl the same for both queues */
+ ew32(TXDCTL(1), er32(TXDCTL(0)));
if (adapter->flags & FLAG_TARC_SPEED_MODE_BIT) {
tarc = er32(TARC(0));
@@ -2834,9 +2852,7 @@ static void e1000_configure_tx(struct e1000_adapter *adapter)
/* enable Report Status bit */
adapter->txd_cmd |= E1000_TXD_CMD_RS;
- ew32(TCTL, tctl);
-
- e1000e_config_collision_dist(hw);
+ hw->mac.ops.config_collision_dist(hw);
}
/**
@@ -2944,8 +2960,7 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
* per packet.
*/
pages = PAGE_USE_COUNT(adapter->netdev->mtu);
- if (!(adapter->flags & FLAG_HAS_ERT) && (pages <= 3) &&
- (PAGE_SIZE <= 16384) && (rctl & E1000_RCTL_LPE))
+ if ((pages <= 3) && (PAGE_SIZE <= 16384) && (rctl & E1000_RCTL_LPE))
adapter->rx_ps_pages = pages;
else
adapter->rx_ps_pages = 0;
@@ -2982,6 +2997,22 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
ew32(PSRCTL, psrctl);
}
+ /* This is useful for sniffing bad packets. */
+ if (adapter->netdev->features & NETIF_F_RXALL) {
+ /* UPE and MPE will be handled by normal PROMISC logic
+ * in e1000e_set_rx_mode */
+ rctl |= (E1000_RCTL_SBP | /* Receive bad packets */
+ E1000_RCTL_BAM | /* RX All Bcast Pkts */
+ E1000_RCTL_PMCF); /* RX All MAC Ctrl Pkts */
+
+ rctl &= ~(E1000_RCTL_VFE | /* Disable VLAN filter */
+ E1000_RCTL_DPF | /* Allow filtered pause */
+ E1000_RCTL_CFIEN); /* Dis VLAN CFIEN Filter */
+ /* Do not mess with E1000_CTRL_VME, it affects transmit as well,
+ * and that breaks VLANs.
+ */
+ }
+
ew32(RFCTL, rfctl);
ew32(RCTL, rctl);
/* just started the receive unit, no need to restart */
@@ -3072,8 +3103,8 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
ew32(RDLEN, rdlen);
ew32(RDH, 0);
ew32(RDT, 0);
- rx_ring->head = E1000_RDH;
- rx_ring->tail = E1000_RDT;
+ rx_ring->head = adapter->hw.hw_addr + E1000_RDH;
+ rx_ring->tail = adapter->hw.hw_addr + E1000_RDT;
/* Enable Receive Checksum Offload for TCP and UDP */
rxcsum = er32(RXCSUM);
@@ -3092,23 +3123,14 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
}
ew32(RXCSUM, rxcsum);
- /*
- * Enable early receives on supported devices, only takes effect when
- * packet size is equal or larger than the specified value (in 8 byte
- * units), e.g. using jumbo frames when setting to E1000_ERT_2048
- */
- if ((adapter->flags & FLAG_HAS_ERT) ||
- (adapter->hw.mac.type == e1000_pch2lan)) {
+ if (adapter->hw.mac.type == e1000_pch2lan) {
+ /*
+ * With jumbo frames, excessive C-state transition
+ * latencies result in dropped transactions.
+ */
if (adapter->netdev->mtu > ETH_DATA_LEN) {
u32 rxdctl = er32(RXDCTL(0));
ew32(RXDCTL(0), rxdctl | 0x3);
- if (adapter->flags & FLAG_HAS_ERT)
- ew32(ERT, E1000_ERT_2048 | (1 << 13));
- /*
- * With jumbo frames and early-receive enabled,
- * excessive C-state transition latencies result in
- * dropped transactions.
- */
pm_qos_update_request(&adapter->netdev->pm_qos_req, 55);
} else {
pm_qos_update_request(&adapter->netdev->pm_qos_req,
@@ -3237,6 +3259,7 @@ static void e1000e_set_rx_mode(struct net_device *netdev)
e1000e_vlan_filter_disable(adapter);
} else {
int count;
+
if (netdev->flags & IFF_ALLMULTI) {
rctl |= E1000_RCTL_MPE;
} else {
@@ -3268,22 +3291,62 @@ static void e1000e_set_rx_mode(struct net_device *netdev)
e1000e_vlan_strip_disable(adapter);
}
+static void e1000e_setup_rss_hash(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 mrqc, rxcsum;
+ int i;
+ static const u32 rsskey[10] = {
+ 0xda565a6d, 0xc20e5b25, 0x3d256741, 0xb08fa343, 0xcb2bcad0,
+ 0xb4307bae, 0xa32dcb77, 0x0cf23080, 0x3bb7426a, 0xfa01acbe
+ };
+
+ /* Fill out hash function seed */
+ for (i = 0; i < 10; i++)
+ ew32(RSSRK(i), rsskey[i]);
+
+ /* Direct all traffic to queue 0 */
+ for (i = 0; i < 32; i++)
+ ew32(RETA(i), 0);
+
+ /*
+ * Disable raw packet checksumming so that RSS hash is placed in
+ * descriptor on writeback.
+ */
+ rxcsum = er32(RXCSUM);
+ rxcsum |= E1000_RXCSUM_PCSD;
+
+ ew32(RXCSUM, rxcsum);
+
+ mrqc = (E1000_MRQC_RSS_FIELD_IPV4 |
+ E1000_MRQC_RSS_FIELD_IPV4_TCP |
+ E1000_MRQC_RSS_FIELD_IPV6 |
+ E1000_MRQC_RSS_FIELD_IPV6_TCP |
+ E1000_MRQC_RSS_FIELD_IPV6_TCP_EX);
+
+ ew32(MRQC, mrqc);
+}
+
/**
* e1000_configure - configure the hardware for Rx and Tx
* @adapter: private board structure
**/
static void e1000_configure(struct e1000_adapter *adapter)
{
+ struct e1000_ring *rx_ring = adapter->rx_ring;
+
e1000e_set_rx_mode(adapter->netdev);
e1000_restore_vlan(adapter);
e1000_init_manageability_pt(adapter);
e1000_configure_tx(adapter);
+
+ if (adapter->netdev->features & NETIF_F_RXHASH)
+ e1000e_setup_rss_hash(adapter);
e1000_setup_rctl(adapter);
e1000_configure_rx(adapter);
- adapter->alloc_rx_buf(adapter, e1000_desc_unused(adapter->rx_ring),
- GFP_KERNEL);
+ adapter->alloc_rx_buf(rx_ring, e1000_desc_unused(rx_ring), GFP_KERNEL);
}
/**
@@ -3379,9 +3442,7 @@ void e1000e_reset(struct e1000_adapter *adapter)
* if short on Rx space, Rx wins and must trump Tx
* adjustment or use Early Receive if available
*/
- if ((pba < min_rx_space) &&
- (!(adapter->flags & FLAG_HAS_ERT)))
- /* ERT enabled in e1000_configure_rx */
+ if (pba < min_rx_space)
pba = min_rx_space;
}
@@ -3395,26 +3456,29 @@ void e1000e_reset(struct e1000_adapter *adapter)
* (or the size used for early receive) above it in the Rx FIFO.
* Set it to the lower of:
* - 90% of the Rx FIFO size, and
- * - the full Rx FIFO size minus the early receive size (for parts
- * with ERT support assuming ERT set to E1000_ERT_2048), or
* - the full Rx FIFO size minus one full frame
*/
if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME)
fc->pause_time = 0xFFFF;
else
fc->pause_time = E1000_FC_PAUSE_TIME;
- fc->send_xon = 1;
+ fc->send_xon = true;
fc->current_mode = fc->requested_mode;
switch (hw->mac.type) {
+ case e1000_ich9lan:
+ case e1000_ich10lan:
+ if (adapter->netdev->mtu > ETH_DATA_LEN) {
+ pba = 14;
+ ew32(PBA, pba);
+ fc->high_water = 0x2800;
+ fc->low_water = fc->high_water - 8;
+ break;
+ }
+ /* fall-through */
default:
- if ((adapter->flags & FLAG_HAS_ERT) &&
- (adapter->netdev->mtu > ETH_DATA_LEN))
- hwm = min(((pba << 10) * 9 / 10),
- ((pba << 10) - (E1000_ERT_2048 << 3)));
- else
- hwm = min(((pba << 10) * 9 / 10),
- ((pba << 10) - adapter->max_frame_size));
+ hwm = min(((pba << 10) * 9 / 10),
+ ((pba << 10) - adapter->max_frame_size));
fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */
fc->low_water = fc->high_water - 8;
@@ -3447,11 +3511,10 @@ void e1000e_reset(struct e1000_adapter *adapter)
/*
* Disable Adaptive Interrupt Moderation if 2 full packets cannot
- * fit in receive buffer and early-receive not supported.
+ * fit in receive buffer.
*/
if (adapter->itr_setting & 0x3) {
- if (((adapter->max_frame_size * 2) > (pba << 10)) &&
- !(adapter->flags & FLAG_HAS_ERT)) {
+ if ((adapter->max_frame_size * 2) > (pba << 10)) {
if (!(adapter->flags2 & FLAG2_DISABLE_AIM)) {
dev_info(&adapter->pdev->dev,
"Interrupt Throttle Rate turned off\n");
@@ -3593,8 +3656,8 @@ void e1000e_down(struct e1000_adapter *adapter)
spin_unlock(&adapter->stats64_lock);
e1000e_flush_descriptors(adapter);
- e1000_clean_tx_ring(adapter);
- e1000_clean_rx_ring(adapter);
+ e1000_clean_tx_ring(adapter->tx_ring);
+ e1000_clean_rx_ring(adapter->rx_ring);
adapter->link_speed = 0;
adapter->link_duplex = 0;
@@ -3634,6 +3697,8 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
adapter->rx_ps_bsize0 = 128;
adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
+ adapter->tx_ring_count = E1000_DEFAULT_TXD;
+ adapter->rx_ring_count = E1000_DEFAULT_RXD;
spin_lock_init(&adapter->stats64_lock);
@@ -3721,8 +3786,9 @@ static int e1000_test_msi_interrupt(struct e1000_adapter *adapter)
if (adapter->flags & FLAG_MSI_TEST_FAILED) {
adapter->int_mode = E1000E_INT_MODE_LEGACY;
e_info("MSI interrupt test failed, using legacy interrupt.\n");
- } else
+ } else {
e_dbg("MSI interrupt test succeeded!\n");
+ }
free_irq(adapter->pdev->irq, netdev);
pci_disable_msi(adapter->pdev);
@@ -3792,12 +3858,12 @@ static int e1000_open(struct net_device *netdev)
netif_carrier_off(netdev);
/* allocate transmit descriptors */
- err = e1000e_setup_tx_resources(adapter);
+ err = e1000e_setup_tx_resources(adapter->tx_ring);
if (err)
goto err_setup_tx;
/* allocate receive descriptors */
- err = e1000e_setup_rx_resources(adapter);
+ err = e1000e_setup_rx_resources(adapter->rx_ring);
if (err)
goto err_setup_rx;
@@ -3817,9 +3883,8 @@ static int e1000_open(struct net_device *netdev)
E1000_MNG_DHCP_COOKIE_STATUS_VLAN))
e1000_update_mng_vlan(adapter);
- /* DMA latency requirement to workaround early-receive/jumbo issue */
- if ((adapter->flags & FLAG_HAS_ERT) ||
- (adapter->hw.mac.type == e1000_pch2lan))
+ /* DMA latency requirement to workaround jumbo issue */
+ if (adapter->hw.mac.type == e1000_pch2lan)
pm_qos_add_request(&adapter->netdev->pm_qos_req,
PM_QOS_CPU_DMA_LATENCY,
PM_QOS_DEFAULT_VALUE);
@@ -3873,9 +3938,9 @@ static int e1000_open(struct net_device *netdev)
err_req_irq:
e1000e_release_hw_control(adapter);
e1000_power_down_phy(adapter);
- e1000e_free_rx_resources(adapter);
+ e1000e_free_rx_resources(adapter->rx_ring);
err_setup_rx:
- e1000e_free_tx_resources(adapter);
+ e1000e_free_tx_resources(adapter->tx_ring);
err_setup_tx:
e1000e_reset(adapter);
pm_runtime_put_sync(&pdev->dev);
@@ -3911,8 +3976,8 @@ static int e1000_close(struct net_device *netdev)
}
e1000_power_down_phy(adapter);
- e1000e_free_tx_resources(adapter);
- e1000e_free_rx_resources(adapter);
+ e1000e_free_tx_resources(adapter->tx_ring);
+ e1000e_free_rx_resources(adapter->rx_ring);
/*
* kill manageability vlan ID if supported, but not if a vlan with
@@ -3930,8 +3995,7 @@ static int e1000_close(struct net_device *netdev)
!test_bit(__E1000_TESTING, &adapter->state))
e1000e_release_hw_control(adapter);
- if ((adapter->flags & FLAG_HAS_ERT) ||
- (adapter->hw.mac.type == e1000_pch2lan))
+ if (adapter->hw.mac.type == e1000_pch2lan)
pm_qos_remove_request(&adapter->netdev->pm_qos_req);
pm_runtime_put_sync(&pdev->dev);
@@ -4566,13 +4630,12 @@ link_up:
#define E1000_TX_FLAGS_VLAN 0x00000002
#define E1000_TX_FLAGS_TSO 0x00000004
#define E1000_TX_FLAGS_IPV4 0x00000008
+#define E1000_TX_FLAGS_NO_FCS 0x00000010
#define E1000_TX_FLAGS_VLAN_MASK 0xffff0000
#define E1000_TX_FLAGS_VLAN_SHIFT 16
-static int e1000_tso(struct e1000_adapter *adapter,
- struct sk_buff *skb)
+static int e1000_tso(struct e1000_ring *tx_ring, struct sk_buff *skb)
{
- struct e1000_ring *tx_ring = adapter->tx_ring;
struct e1000_context_desc *context_desc;
struct e1000_buffer *buffer_info;
unsigned int i;
@@ -4641,9 +4704,9 @@ static int e1000_tso(struct e1000_adapter *adapter,
return 1;
}
-static bool e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb)
+static bool e1000_tx_csum(struct e1000_ring *tx_ring, struct sk_buff *skb)
{
- struct e1000_ring *tx_ring = adapter->tx_ring;
+ struct e1000_adapter *adapter = tx_ring->adapter;
struct e1000_context_desc *context_desc;
struct e1000_buffer *buffer_info;
unsigned int i;
@@ -4704,12 +4767,11 @@ static bool e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb)
#define E1000_MAX_PER_TXD 8192
#define E1000_MAX_TXD_PWR 12
-static int e1000_tx_map(struct e1000_adapter *adapter,
- struct sk_buff *skb, unsigned int first,
- unsigned int max_per_txd, unsigned int nr_frags,
- unsigned int mss)
+static int e1000_tx_map(struct e1000_ring *tx_ring, struct sk_buff *skb,
+ unsigned int first, unsigned int max_per_txd,
+ unsigned int nr_frags, unsigned int mss)
{
- struct e1000_ring *tx_ring = adapter->tx_ring;
+ struct e1000_adapter *adapter = tx_ring->adapter;
struct pci_dev *pdev = adapter->pdev;
struct e1000_buffer *buffer_info;
unsigned int len = skb_headlen(skb);
@@ -4795,16 +4857,15 @@ dma_error:
i += tx_ring->count;
i--;
buffer_info = &tx_ring->buffer_info[i];
- e1000_put_txbuf(adapter, buffer_info);
+ e1000_put_txbuf(tx_ring, buffer_info);
}
return 0;
}
-static void e1000_tx_queue(struct e1000_adapter *adapter,
- int tx_flags, int count)
+static void e1000_tx_queue(struct e1000_ring *tx_ring, int tx_flags, int count)
{
- struct e1000_ring *tx_ring = adapter->tx_ring;
+ struct e1000_adapter *adapter = tx_ring->adapter;
struct e1000_tx_desc *tx_desc = NULL;
struct e1000_buffer *buffer_info;
u32 txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
@@ -4829,6 +4890,9 @@ static void e1000_tx_queue(struct e1000_adapter *adapter,
txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
}
+ if (unlikely(tx_flags & E1000_TX_FLAGS_NO_FCS))
+ txd_lower &= ~(E1000_TXD_CMD_IFCS);
+
i = tx_ring->next_to_use;
do {
@@ -4846,6 +4910,10 @@ static void e1000_tx_queue(struct e1000_adapter *adapter,
tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
+ /* txd_cmd re-enables FCS, so we'll re-disable it here as desired. */
+ if (unlikely(tx_flags & E1000_TX_FLAGS_NO_FCS))
+ tx_desc->lower.data &= ~(cpu_to_le32(E1000_TXD_CMD_IFCS));
+
/*
* Force memory writes to complete before letting h/w
* know there are new descriptors to fetch. (Only
@@ -4857,9 +4925,9 @@ static void e1000_tx_queue(struct e1000_adapter *adapter,
tx_ring->next_to_use = i;
if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
- e1000e_update_tdt_wa(adapter, i);
+ e1000e_update_tdt_wa(tx_ring, i);
else
- writel(i, adapter->hw.hw_addr + tx_ring->tail);
+ writel(i, tx_ring->tail);
/*
* we need this if more than one processor can write to our tail
@@ -4907,11 +4975,11 @@ static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter,
return 0;
}
-static int __e1000_maybe_stop_tx(struct net_device *netdev, int size)
+static int __e1000_maybe_stop_tx(struct e1000_ring *tx_ring, int size)
{
- struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_adapter *adapter = tx_ring->adapter;
- netif_stop_queue(netdev);
+ netif_stop_queue(adapter->netdev);
/*
* Herbert's original patch had:
* smp_mb__after_netif_stop_queue();
@@ -4923,25 +4991,23 @@ static int __e1000_maybe_stop_tx(struct net_device *netdev, int size)
* We need to check again in a case another CPU has just
* made room available.
*/
- if (e1000_desc_unused(adapter->tx_ring) < size)
+ if (e1000_desc_unused(tx_ring) < size)
return -EBUSY;
/* A reprieve! */
- netif_start_queue(netdev);
+ netif_start_queue(adapter->netdev);
++adapter->restart_queue;
return 0;
}
-static int e1000_maybe_stop_tx(struct net_device *netdev, int size)
+static int e1000_maybe_stop_tx(struct e1000_ring *tx_ring, int size)
{
- struct e1000_adapter *adapter = netdev_priv(netdev);
-
- if (e1000_desc_unused(adapter->tx_ring) >= size)
+ if (e1000_desc_unused(tx_ring) >= size)
return 0;
- return __e1000_maybe_stop_tx(netdev, size);
+ return __e1000_maybe_stop_tx(tx_ring, size);
}
-#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
+#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1)
static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
struct net_device *netdev)
{
@@ -4995,7 +5061,7 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
if (skb->data_len && (hdr_len == len)) {
unsigned int pull_size;
- pull_size = min((unsigned int)4, skb->data_len);
+ pull_size = min_t(unsigned int, 4, skb->data_len);
if (!__pskb_pull_tail(skb, pull_size)) {
e_err("__pskb_pull_tail failed.\n");
dev_kfree_skb_any(skb);
@@ -5024,7 +5090,7 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
* need: count + 2 desc gap to keep tail from touching
* head, otherwise try next time
*/
- if (e1000_maybe_stop_tx(netdev, count + 2))
+ if (e1000_maybe_stop_tx(tx_ring, count + 2))
return NETDEV_TX_BUSY;
if (vlan_tx_tag_present(skb)) {
@@ -5034,7 +5100,7 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
first = tx_ring->next_to_use;
- tso = e1000_tso(adapter, skb);
+ tso = e1000_tso(tx_ring, skb);
if (tso < 0) {
dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
@@ -5042,7 +5108,7 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
if (tso)
tx_flags |= E1000_TX_FLAGS_TSO;
- else if (e1000_tx_csum(adapter, skb))
+ else if (e1000_tx_csum(tx_ring, skb))
tx_flags |= E1000_TX_FLAGS_CSUM;
/*
@@ -5053,13 +5119,16 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
if (skb->protocol == htons(ETH_P_IP))
tx_flags |= E1000_TX_FLAGS_IPV4;
+ if (unlikely(skb->no_fcs))
+ tx_flags |= E1000_TX_FLAGS_NO_FCS;
+
/* if count is 0 then mapping error has occurred */
- count = e1000_tx_map(adapter, skb, first, max_per_txd, nr_frags, mss);
+ count = e1000_tx_map(tx_ring, skb, first, max_per_txd, nr_frags, mss);
if (count) {
netdev_sent_queue(netdev, skb->len);
- e1000_tx_queue(adapter, tx_flags, count);
+ e1000_tx_queue(tx_ring, tx_flags, count);
/* Make sure there is space in the ring for the next send. */
- e1000_maybe_stop_tx(netdev, MAX_SKB_FRAGS + 2);
+ e1000_maybe_stop_tx(tx_ring, MAX_SKB_FRAGS + 2);
} else {
dev_kfree_skb_any(skb);
@@ -5165,10 +5234,22 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
/* Jumbo frame support */
- if ((max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) &&
- !(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
- e_err("Jumbo Frames not supported.\n");
- return -EINVAL;
+ if (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) {
+ if (!(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
+ e_err("Jumbo Frames not supported.\n");
+ return -EINVAL;
+ }
+
+ /*
+ * IP payload checksum (enabled with jumbos/packet-split when
+ * Rx checksum is enabled) and generation of RSS hash is
+ * mutually exclusive in the hardware.
+ */
+ if ((netdev->features & NETIF_F_RXCSUM) &&
+ (netdev->features & NETIF_F_RXHASH)) {
+ e_err("Jumbo frames cannot be enabled when both receive checksum offload and receive hashing are enabled. Disable one of the receive offload features before enabling jumbos.\n");
+ return -EINVAL;
+ }
}
/* Supported frame sizes */
@@ -5322,7 +5403,7 @@ static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
/* Enable access to wakeup registers on and set page to BM_WUC_PAGE */
retval = e1000_enable_phy_wakeup_reg_access_bm(hw, &wuc_enable);
if (retval)
- goto out;
+ goto release;
/* copy MAC MTA to PHY MTA - only needed for pchlan */
for (i = 0; i < adapter->hw.mac.mta_reg_count; i++) {
@@ -5366,7 +5447,7 @@ static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
retval = e1000_disable_phy_wakeup_reg_access_bm(hw, &wuc_enable);
if (retval)
e_err("Could not set PHY Host Wakeup bit\n");
-out:
+release:
hw->phy.ops.release(hw);
return retval;
@@ -5908,7 +5989,7 @@ static void e1000_print_device_info(struct e1000_adapter *adapter)
ret_val = e1000_read_pba_string_generic(hw, pba_str,
E1000_PBANUM_LENGTH);
if (ret_val)
- strncpy((char *)pba_str, "Unknown", sizeof(pba_str) - 1);
+ strlcpy((char *)pba_str, "Unknown", sizeof(pba_str));
e_info("MAC: %d, PHY: %d, PBA No: %s\n",
hw->mac.type, hw->phy.type, pba_str);
}
@@ -5923,7 +6004,8 @@ static void e1000_eeprom_checks(struct e1000_adapter *adapter)
return;
ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &buf);
- if (!ret_val && (!(le16_to_cpu(buf) & (1 << 0)))) {
+ le16_to_cpus(&buf);
+ if (!ret_val && (!(buf & (1 << 0)))) {
/* Deep Smart Power Down (DSPD) */
dev_warn(&adapter->pdev->dev,
"Warning: detected DSPD enabled in EEPROM\n");
@@ -5931,7 +6013,7 @@ static void e1000_eeprom_checks(struct e1000_adapter *adapter)
}
static int e1000_set_features(struct net_device *netdev,
- netdev_features_t features)
+ netdev_features_t features)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
netdev_features_t changed = features ^ netdev->features;
@@ -5940,9 +6022,37 @@ static int e1000_set_features(struct net_device *netdev,
adapter->flags |= FLAG_TSO_FORCE;
if (!(changed & (NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX |
- NETIF_F_RXCSUM)))
+ NETIF_F_RXCSUM | NETIF_F_RXHASH | NETIF_F_RXFCS |
+ NETIF_F_RXALL)))
return 0;
+ /*
+ * IP payload checksum (enabled with jumbos/packet-split when Rx
+ * checksum is enabled) and generation of RSS hash is mutually
+ * exclusive in the hardware.
+ */
+ if (adapter->rx_ps_pages &&
+ (features & NETIF_F_RXCSUM) && (features & NETIF_F_RXHASH)) {
+ e_err("Enabling both receive checksum offload and receive hashing is not possible with jumbo frames. Disable jumbos or enable only one of the receive offload features.\n");
+ return -EINVAL;
+ }
+
+ if (changed & NETIF_F_RXFCS) {
+ if (features & NETIF_F_RXFCS) {
+ adapter->flags2 &= ~FLAG2_CRC_STRIPPING;
+ } else {
+ /* We need to take it back to defaults, which might mean
+ * stripping is still disabled at the adapter level.
+ */
+ if (adapter->flags2 & FLAG2_DFLT_CRC_STRIPPING)
+ adapter->flags2 |= FLAG2_CRC_STRIPPING;
+ else
+ adapter->flags2 &= ~FLAG2_CRC_STRIPPING;
+ }
+ }
+
+ netdev->features = features;
+
if (netif_running(netdev))
e1000e_reinit_locked(adapter);
else
@@ -5991,7 +6101,6 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
const struct e1000_info *ei = e1000_info_tbl[ent->driver_data];
resource_size_t mmio_start, mmio_len;
resource_size_t flash_start, flash_len;
-
static int cards_found;
u16 aspm_disable_flag = 0;
int i, err, pci_using_dac;
@@ -6087,7 +6196,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
e1000e_set_ethtool_ops(netdev);
netdev->watchdog_timeo = 5 * HZ;
netif_napi_add(netdev, &adapter->napi, e1000_clean, 64);
- strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
+ strlcpy(netdev->name, pci_name(pdev), sizeof(netdev->name));
netdev->mem_start = mmio_start;
netdev->mem_end = mmio_start + mmio_len;
@@ -6124,7 +6233,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
adapter->hw.phy.ms_type = e1000_ms_hw_default;
}
- if (e1000_check_reset_block(&adapter->hw))
+ if (hw->phy.ops.check_reset_block(hw))
e_info("PHY reset is blocked due to SOL/IDER session.\n");
/* Set initial default active device features */
@@ -6133,11 +6242,15 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
NETIF_F_HW_VLAN_TX |
NETIF_F_TSO |
NETIF_F_TSO6 |
+ NETIF_F_RXHASH |
NETIF_F_RXCSUM |
NETIF_F_HW_CSUM);
/* Set user-changeable features (subset of all device features) */
netdev->hw_features = netdev->features;
+ netdev->hw_features |= NETIF_F_RXFCS;
+ netdev->priv_flags |= IFF_SUPP_NOFCS;
+ netdev->hw_features |= NETIF_F_RXALL;
if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER)
netdev->features |= NETIF_F_HW_VLAN_FILTER;
@@ -6231,11 +6344,11 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
} else if (adapter->flags & FLAG_APME_IN_CTRL3) {
if (adapter->flags & FLAG_APME_CHECK_PORT_B &&
(adapter->hw.bus.func == 1))
- e1000_read_nvm(&adapter->hw,
- NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
+ e1000_read_nvm(&adapter->hw, NVM_INIT_CONTROL3_PORT_B,
+ 1, &eeprom_data);
else
- e1000_read_nvm(&adapter->hw,
- NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
+ e1000_read_nvm(&adapter->hw, NVM_INIT_CONTROL3_PORT_A,
+ 1, &eeprom_data);
}
/* fetch WoL from EEPROM */
@@ -6268,7 +6381,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
if (!(adapter->flags & FLAG_HAS_AMT))
e1000e_get_hw_control(adapter);
- strncpy(netdev->name, "eth%d", sizeof(netdev->name) - 1);
+ strlcpy(netdev->name, "eth%d", sizeof(netdev->name));
err = register_netdev(netdev);
if (err)
goto err_register;
@@ -6287,7 +6400,7 @@ err_register:
if (!(adapter->flags & FLAG_HAS_AMT))
e1000e_release_hw_control(adapter);
err_eeprom:
- if (!e1000_check_reset_block(&adapter->hw))
+ if (!hw->phy.ops.check_reset_block(hw))
e1000_phy_hw_reset(&adapter->hw);
err_hw_init:
kfree(adapter->tx_ring);
@@ -6449,7 +6562,7 @@ static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = {
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH2_LV_LM), board_pch2lan },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH2_LV_V), board_pch2lan },
- { } /* terminate list */
+ { 0, 0, 0, 0, 0, 0, 0 } /* terminate list */
};
MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
@@ -6468,7 +6581,9 @@ static struct pci_driver e1000_driver = {
.probe = e1000_probe,
.remove = __devexit_p(e1000_remove),
#ifdef CONFIG_PM
- .driver.pm = &e1000_pm_ops,
+ .driver = {
+ .pm = &e1000_pm_ops,
+ },
#endif
.shutdown = e1000_shutdown,
.err_handler = &e1000_err_handler
@@ -6485,7 +6600,7 @@ static int __init e1000_init_module(void)
int ret;
pr_info("Intel(R) PRO/1000 Network Driver - %s\n",
e1000e_driver_version);
- pr_info("Copyright(c) 1999 - 2011 Intel Corporation.\n");
+ pr_info("Copyright(c) 1999 - 2012 Intel Corporation.\n");
ret = pci_register_driver(&e1000_driver);
return ret;
@@ -6510,4 +6625,4 @@ MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
-/* e1000_main.c */
+/* netdev.c */
diff --git a/drivers/net/ethernet/intel/e1000e/nvm.c b/drivers/net/ethernet/intel/e1000e/nvm.c
new file mode 100644
index 000000000000..a969f1af1b4e
--- /dev/null
+++ b/drivers/net/ethernet/intel/e1000e/nvm.c
@@ -0,0 +1,643 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2012 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "e1000.h"
+
+/**
+ * e1000_raise_eec_clk - Raise EEPROM clock
+ * @hw: pointer to the HW structure
+ * @eecd: pointer to the EEPROM
+ *
+ * Enable/Raise the EEPROM clock bit.
+ **/
+static void e1000_raise_eec_clk(struct e1000_hw *hw, u32 *eecd)
+{
+ *eecd = *eecd | E1000_EECD_SK;
+ ew32(EECD, *eecd);
+ e1e_flush();
+ udelay(hw->nvm.delay_usec);
+}
+
+/**
+ * e1000_lower_eec_clk - Lower EEPROM clock
+ * @hw: pointer to the HW structure
+ * @eecd: pointer to the EEPROM
+ *
+ * Clear/Lower the EEPROM clock bit.
+ **/
+static void e1000_lower_eec_clk(struct e1000_hw *hw, u32 *eecd)
+{
+ *eecd = *eecd & ~E1000_EECD_SK;
+ ew32(EECD, *eecd);
+ e1e_flush();
+ udelay(hw->nvm.delay_usec);
+}
+
+/**
+ * e1000_shift_out_eec_bits - Shift data bits our to the EEPROM
+ * @hw: pointer to the HW structure
+ * @data: data to send to the EEPROM
+ * @count: number of bits to shift out
+ *
+ * We need to shift 'count' bits out to the EEPROM. So, the value in the
+ * "data" parameter will be shifted out to the EEPROM one bit at a time.
+ * In order to do this, "data" must be broken down into bits.
+ **/
+static void e1000_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 eecd = er32(EECD);
+ u32 mask;
+
+ mask = 0x01 << (count - 1);
+ if (nvm->type == e1000_nvm_eeprom_spi)
+ eecd |= E1000_EECD_DO;
+
+ do {
+ eecd &= ~E1000_EECD_DI;
+
+ if (data & mask)
+ eecd |= E1000_EECD_DI;
+
+ ew32(EECD, eecd);
+ e1e_flush();
+
+ udelay(nvm->delay_usec);
+
+ e1000_raise_eec_clk(hw, &eecd);
+ e1000_lower_eec_clk(hw, &eecd);
+
+ mask >>= 1;
+ } while (mask);
+
+ eecd &= ~E1000_EECD_DI;
+ ew32(EECD, eecd);
+}
+
+/**
+ * e1000_shift_in_eec_bits - Shift data bits in from the EEPROM
+ * @hw: pointer to the HW structure
+ * @count: number of bits to shift in
+ *
+ * In order to read a register from the EEPROM, we need to shift 'count' bits
+ * in from the EEPROM. Bits are "shifted in" by raising the clock input to
+ * the EEPROM (setting the SK bit), and then reading the value of the data out
+ * "DO" bit. During this "shifting in" process the data in "DI" bit should
+ * always be clear.
+ **/
+static u16 e1000_shift_in_eec_bits(struct e1000_hw *hw, u16 count)
+{
+ u32 eecd;
+ u32 i;
+ u16 data;
+
+ eecd = er32(EECD);
+
+ eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
+ data = 0;
+
+ for (i = 0; i < count; i++) {
+ data <<= 1;
+ e1000_raise_eec_clk(hw, &eecd);
+
+ eecd = er32(EECD);
+
+ eecd &= ~E1000_EECD_DI;
+ if (eecd & E1000_EECD_DO)
+ data |= 1;
+
+ e1000_lower_eec_clk(hw, &eecd);
+ }
+
+ return data;
+}
+
+/**
+ * e1000e_poll_eerd_eewr_done - Poll for EEPROM read/write completion
+ * @hw: pointer to the HW structure
+ * @ee_reg: EEPROM flag for polling
+ *
+ * Polls the EEPROM status bit for either read or write completion based
+ * upon the value of 'ee_reg'.
+ **/
+s32 e1000e_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg)
+{
+ u32 attempts = 100000;
+ u32 i, reg = 0;
+
+ for (i = 0; i < attempts; i++) {
+ if (ee_reg == E1000_NVM_POLL_READ)
+ reg = er32(EERD);
+ else
+ reg = er32(EEWR);
+
+ if (reg & E1000_NVM_RW_REG_DONE)
+ return 0;
+
+ udelay(5);
+ }
+
+ return -E1000_ERR_NVM;
+}
+
+/**
+ * e1000e_acquire_nvm - Generic request for access to EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Set the EEPROM access request bit and wait for EEPROM access grant bit.
+ * Return successful if access grant bit set, else clear the request for
+ * EEPROM access and return -E1000_ERR_NVM (-1).
+ **/
+s32 e1000e_acquire_nvm(struct e1000_hw *hw)
+{
+ u32 eecd = er32(EECD);
+ s32 timeout = E1000_NVM_GRANT_ATTEMPTS;
+
+ ew32(EECD, eecd | E1000_EECD_REQ);
+ eecd = er32(EECD);
+
+ while (timeout) {
+ if (eecd & E1000_EECD_GNT)
+ break;
+ udelay(5);
+ eecd = er32(EECD);
+ timeout--;
+ }
+
+ if (!timeout) {
+ eecd &= ~E1000_EECD_REQ;
+ ew32(EECD, eecd);
+ e_dbg("Could not acquire NVM grant\n");
+ return -E1000_ERR_NVM;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_standby_nvm - Return EEPROM to standby state
+ * @hw: pointer to the HW structure
+ *
+ * Return the EEPROM to a standby state.
+ **/
+static void e1000_standby_nvm(struct e1000_hw *hw)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 eecd = er32(EECD);
+
+ if (nvm->type == e1000_nvm_eeprom_spi) {
+ /* Toggle CS to flush commands */
+ eecd |= E1000_EECD_CS;
+ ew32(EECD, eecd);
+ e1e_flush();
+ udelay(nvm->delay_usec);
+ eecd &= ~E1000_EECD_CS;
+ ew32(EECD, eecd);
+ e1e_flush();
+ udelay(nvm->delay_usec);
+ }
+}
+
+/**
+ * e1000_stop_nvm - Terminate EEPROM command
+ * @hw: pointer to the HW structure
+ *
+ * Terminates the current command by inverting the EEPROM's chip select pin.
+ **/
+static void e1000_stop_nvm(struct e1000_hw *hw)
+{
+ u32 eecd;
+
+ eecd = er32(EECD);
+ if (hw->nvm.type == e1000_nvm_eeprom_spi) {
+ /* Pull CS high */
+ eecd |= E1000_EECD_CS;
+ e1000_lower_eec_clk(hw, &eecd);
+ }
+}
+
+/**
+ * e1000e_release_nvm - Release exclusive access to EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Stop any current commands to the EEPROM and clear the EEPROM request bit.
+ **/
+void e1000e_release_nvm(struct e1000_hw *hw)
+{
+ u32 eecd;
+
+ e1000_stop_nvm(hw);
+
+ eecd = er32(EECD);
+ eecd &= ~E1000_EECD_REQ;
+ ew32(EECD, eecd);
+}
+
+/**
+ * e1000_ready_nvm_eeprom - Prepares EEPROM for read/write
+ * @hw: pointer to the HW structure
+ *
+ * Setups the EEPROM for reading and writing.
+ **/
+static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 eecd = er32(EECD);
+ u8 spi_stat_reg;
+
+ if (nvm->type == e1000_nvm_eeprom_spi) {
+ u16 timeout = NVM_MAX_RETRY_SPI;
+
+ /* Clear SK and CS */
+ eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
+ ew32(EECD, eecd);
+ e1e_flush();
+ udelay(1);
+
+ /*
+ * Read "Status Register" repeatedly until the LSB is cleared.
+ * The EEPROM will signal that the command has been completed
+ * by clearing bit 0 of the internal status register. If it's
+ * not cleared within 'timeout', then error out.
+ */
+ while (timeout) {
+ e1000_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI,
+ hw->nvm.opcode_bits);
+ spi_stat_reg = (u8)e1000_shift_in_eec_bits(hw, 8);
+ if (!(spi_stat_reg & NVM_STATUS_RDY_SPI))
+ break;
+
+ udelay(5);
+ e1000_standby_nvm(hw);
+ timeout--;
+ }
+
+ if (!timeout) {
+ e_dbg("SPI NVM Status error\n");
+ return -E1000_ERR_NVM;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * e1000e_read_nvm_eerd - Reads EEPROM using EERD register
+ * @hw: pointer to the HW structure
+ * @offset: offset of word in the EEPROM to read
+ * @words: number of words to read
+ * @data: word read from the EEPROM
+ *
+ * Reads a 16 bit word from the EEPROM using the EERD register.
+ **/
+s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 i, eerd = 0;
+ s32 ret_val = 0;
+
+ /*
+ * A check for invalid values: offset too large, too many words,
+ * too many words for the offset, and not enough words.
+ */
+ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+ (words == 0)) {
+ e_dbg("nvm parameter(s) out of bounds\n");
+ return -E1000_ERR_NVM;
+ }
+
+ for (i = 0; i < words; i++) {
+ eerd = ((offset + i) << E1000_NVM_RW_ADDR_SHIFT) +
+ E1000_NVM_RW_REG_START;
+
+ ew32(EERD, eerd);
+ ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ);
+ if (ret_val)
+ break;
+
+ data[i] = (er32(EERD) >> E1000_NVM_RW_REG_DATA);
+ }
+
+ return ret_val;
+}
+
+/**
+ * e1000e_write_nvm_spi - Write to EEPROM using SPI
+ * @hw: pointer to the HW structure
+ * @offset: offset within the EEPROM to be written to
+ * @words: number of words to write
+ * @data: 16 bit word(s) to be written to the EEPROM
+ *
+ * Writes data to EEPROM at offset using SPI interface.
+ *
+ * If e1000e_update_nvm_checksum is not called after this function , the
+ * EEPROM will most likely contain an invalid checksum.
+ **/
+s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ s32 ret_val;
+ u16 widx = 0;
+
+ /*
+ * A check for invalid values: offset too large, too many words,
+ * and not enough words.
+ */
+ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+ (words == 0)) {
+ e_dbg("nvm parameter(s) out of bounds\n");
+ return -E1000_ERR_NVM;
+ }
+
+ ret_val = nvm->ops.acquire(hw);
+ if (ret_val)
+ return ret_val;
+
+ while (widx < words) {
+ u8 write_opcode = NVM_WRITE_OPCODE_SPI;
+
+ ret_val = e1000_ready_nvm_eeprom(hw);
+ if (ret_val)
+ goto release;
+
+ e1000_standby_nvm(hw);
+
+ /* Send the WRITE ENABLE command (8 bit opcode) */
+ e1000_shift_out_eec_bits(hw, NVM_WREN_OPCODE_SPI,
+ nvm->opcode_bits);
+
+ e1000_standby_nvm(hw);
+
+ /*
+ * Some SPI eeproms use the 8th address bit embedded in the
+ * opcode
+ */
+ if ((nvm->address_bits == 8) && (offset >= 128))
+ write_opcode |= NVM_A8_OPCODE_SPI;
+
+ /* Send the Write command (8-bit opcode + addr) */
+ e1000_shift_out_eec_bits(hw, write_opcode, nvm->opcode_bits);
+ e1000_shift_out_eec_bits(hw, (u16)((offset + widx) * 2),
+ nvm->address_bits);
+
+ /* Loop to allow for up to whole page write of eeprom */
+ while (widx < words) {
+ u16 word_out = data[widx];
+ word_out = (word_out >> 8) | (word_out << 8);
+ e1000_shift_out_eec_bits(hw, word_out, 16);
+ widx++;
+
+ if ((((offset + widx) * 2) % nvm->page_size) == 0) {
+ e1000_standby_nvm(hw);
+ break;
+ }
+ }
+ }
+
+ usleep_range(10000, 20000);
+release:
+ nvm->ops.release(hw);
+
+ return ret_val;
+}
+
+/**
+ * e1000_read_pba_string_generic - Read device part number
+ * @hw: pointer to the HW structure
+ * @pba_num: pointer to device part number
+ * @pba_num_size: size of part number buffer
+ *
+ * Reads the product board assembly (PBA) number from the EEPROM and stores
+ * the value in pba_num.
+ **/
+s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num,
+ u32 pba_num_size)
+{
+ s32 ret_val;
+ u16 nvm_data;
+ u16 pba_ptr;
+ u16 offset;
+ u16 length;
+
+ if (pba_num == NULL) {
+ e_dbg("PBA string buffer was null\n");
+ return -E1000_ERR_INVALID_ARGUMENT;
+ }
+
+ ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
+ if (ret_val) {
+ e_dbg("NVM Read Error\n");
+ return ret_val;
+ }
+
+ ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_1, 1, &pba_ptr);
+ if (ret_val) {
+ e_dbg("NVM Read Error\n");
+ return ret_val;
+ }
+
+ /*
+ * if nvm_data is not ptr guard the PBA must be in legacy format which
+ * means pba_ptr is actually our second data word for the PBA number
+ * and we can decode it into an ascii string
+ */
+ if (nvm_data != NVM_PBA_PTR_GUARD) {
+ e_dbg("NVM PBA number is not stored as string\n");
+
+ /* we will need 11 characters to store the PBA */
+ if (pba_num_size < 11) {
+ e_dbg("PBA string buffer too small\n");
+ return E1000_ERR_NO_SPACE;
+ }
+
+ /* extract hex string from data and pba_ptr */
+ pba_num[0] = (nvm_data >> 12) & 0xF;
+ pba_num[1] = (nvm_data >> 8) & 0xF;
+ pba_num[2] = (nvm_data >> 4) & 0xF;
+ pba_num[3] = nvm_data & 0xF;
+ pba_num[4] = (pba_ptr >> 12) & 0xF;
+ pba_num[5] = (pba_ptr >> 8) & 0xF;
+ pba_num[6] = '-';
+ pba_num[7] = 0;
+ pba_num[8] = (pba_ptr >> 4) & 0xF;
+ pba_num[9] = pba_ptr & 0xF;
+
+ /* put a null character on the end of our string */
+ pba_num[10] = '\0';
+
+ /* switch all the data but the '-' to hex char */
+ for (offset = 0; offset < 10; offset++) {
+ if (pba_num[offset] < 0xA)
+ pba_num[offset] += '0';
+ else if (pba_num[offset] < 0x10)
+ pba_num[offset] += 'A' - 0xA;
+ }
+
+ return 0;
+ }
+
+ ret_val = e1000_read_nvm(hw, pba_ptr, 1, &length);
+ if (ret_val) {
+ e_dbg("NVM Read Error\n");
+ return ret_val;
+ }
+
+ if (length == 0xFFFF || length == 0) {
+ e_dbg("NVM PBA number section invalid length\n");
+ return -E1000_ERR_NVM_PBA_SECTION;
+ }
+ /* check if pba_num buffer is big enough */
+ if (pba_num_size < (((u32)length * 2) - 1)) {
+ e_dbg("PBA string buffer too small\n");
+ return -E1000_ERR_NO_SPACE;
+ }
+
+ /* trim pba length from start of string */
+ pba_ptr++;
+ length--;
+
+ for (offset = 0; offset < length; offset++) {
+ ret_val = e1000_read_nvm(hw, pba_ptr + offset, 1, &nvm_data);
+ if (ret_val) {
+ e_dbg("NVM Read Error\n");
+ return ret_val;
+ }
+ pba_num[offset * 2] = (u8)(nvm_data >> 8);
+ pba_num[(offset * 2) + 1] = (u8)(nvm_data & 0xFF);
+ }
+ pba_num[offset * 2] = '\0';
+
+ return 0;
+}
+
+/**
+ * e1000_read_mac_addr_generic - Read device MAC address
+ * @hw: pointer to the HW structure
+ *
+ * Reads the device MAC address from the EEPROM and stores the value.
+ * Since devices with two ports use the same EEPROM, we increment the
+ * last bit in the MAC address for the second port.
+ **/
+s32 e1000_read_mac_addr_generic(struct e1000_hw *hw)
+{
+ u32 rar_high;
+ u32 rar_low;
+ u16 i;
+
+ rar_high = er32(RAH(0));
+ rar_low = er32(RAL(0));
+
+ for (i = 0; i < E1000_RAL_MAC_ADDR_LEN; i++)
+ hw->mac.perm_addr[i] = (u8)(rar_low >> (i * 8));
+
+ for (i = 0; i < E1000_RAH_MAC_ADDR_LEN; i++)
+ hw->mac.perm_addr[i + 4] = (u8)(rar_high >> (i * 8));
+
+ for (i = 0; i < ETH_ALEN; i++)
+ hw->mac.addr[i] = hw->mac.perm_addr[i];
+
+ return 0;
+}
+
+/**
+ * e1000e_validate_nvm_checksum_generic - Validate EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Calculates the EEPROM checksum by reading/adding each word of the EEPROM
+ * and then verifies that the sum of the EEPROM is equal to 0xBABA.
+ **/
+s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 checksum = 0;
+ u16 i, nvm_data;
+
+ for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
+ ret_val = e1000_read_nvm(hw, i, 1, &nvm_data);
+ if (ret_val) {
+ e_dbg("NVM Read Error\n");
+ return ret_val;
+ }
+ checksum += nvm_data;
+ }
+
+ if (checksum != (u16)NVM_SUM) {
+ e_dbg("NVM Checksum Invalid\n");
+ return -E1000_ERR_NVM;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000e_update_nvm_checksum_generic - Update EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Updates the EEPROM checksum by reading/adding each word of the EEPROM
+ * up to the checksum. Then calculates the EEPROM checksum and writes the
+ * value to the EEPROM.
+ **/
+s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 checksum = 0;
+ u16 i, nvm_data;
+
+ for (i = 0; i < NVM_CHECKSUM_REG; i++) {
+ ret_val = e1000_read_nvm(hw, i, 1, &nvm_data);
+ if (ret_val) {
+ e_dbg("NVM Read Error while updating checksum.\n");
+ return ret_val;
+ }
+ checksum += nvm_data;
+ }
+ checksum = (u16)NVM_SUM - checksum;
+ ret_val = e1000_write_nvm(hw, NVM_CHECKSUM_REG, 1, &checksum);
+ if (ret_val)
+ e_dbg("NVM Write Error while updating checksum.\n");
+
+ return ret_val;
+}
+
+/**
+ * e1000e_reload_nvm_generic - Reloads EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the
+ * extended control register.
+ **/
+void e1000e_reload_nvm_generic(struct e1000_hw *hw)
+{
+ u32 ctrl_ext;
+
+ udelay(10);
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_EE_RST;
+ ew32(CTRL_EXT, ctrl_ext);
+ e1e_flush();
+}
diff --git a/drivers/net/ethernet/intel/e1000e/param.c b/drivers/net/ethernet/intel/e1000e/param.c
index 20e93b08e7f3..ff796e42c3eb 100644
--- a/drivers/net/ethernet/intel/e1000e/param.c
+++ b/drivers/net/ethernet/intel/e1000e/param.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -113,11 +113,20 @@ E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
#define MAX_ITR 100000
#define MIN_ITR 100
-/* IntMode (Interrupt Mode)
+/*
+ * IntMode (Interrupt Mode)
+ *
+ * Valid Range: varies depending on kernel configuration & hardware support
+ *
+ * legacy=0, MSI=1, MSI-X=2
*
- * Valid Range: 0 - 2
+ * When MSI/MSI-X support is enabled in kernel-
+ * Default Value: 2 (MSI-X) when supported by hardware, 1 (MSI) otherwise
+ * When MSI/MSI-X support is not enabled in kernel-
+ * Default Value: 0 (legacy)
*
- * Default Value: 2 (MSI-X)
+ * When a mode is specified that is not allowed/supported, it will be
+ * demoted to the most advanced interrupt mode available.
*/
E1000_PARAM(IntMode, "Interrupt Mode");
#define MAX_INTMODE 2
@@ -388,12 +397,33 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter)
static struct e1000_option opt = {
.type = range_option,
.name = "Interrupt Mode",
- .err = "defaulting to 2 (MSI-X)",
- .def = E1000E_INT_MODE_MSIX,
- .arg = { .r = { .min = MIN_INTMODE,
- .max = MAX_INTMODE } }
+#ifndef CONFIG_PCI_MSI
+ .err = "defaulting to 0 (legacy)",
+ .def = E1000E_INT_MODE_LEGACY,
+ .arg = { .r = { .min = 0,
+ .max = 0 } }
+#endif
};
+#ifdef CONFIG_PCI_MSI
+ if (adapter->flags & FLAG_HAS_MSIX) {
+ opt.err = kstrdup("defaulting to 2 (MSI-X)",
+ GFP_KERNEL);
+ opt.def = E1000E_INT_MODE_MSIX;
+ opt.arg.r.max = E1000E_INT_MODE_MSIX;
+ } else {
+ opt.err = kstrdup("defaulting to 1 (MSI)", GFP_KERNEL);
+ opt.def = E1000E_INT_MODE_MSI;
+ opt.arg.r.max = E1000E_INT_MODE_MSI;
+ }
+
+ if (!opt.err) {
+ dev_err(&adapter->pdev->dev,
+ "Failed to allocate memory\n");
+ return;
+ }
+#endif
+
if (num_IntMode > bd) {
unsigned int int_mode = IntMode[bd];
e1000_validate_option(&int_mode, &opt, adapter);
@@ -401,6 +431,10 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter)
} else {
adapter->int_mode = opt.def;
}
+
+#ifdef CONFIG_PCI_MSI
+ kfree(opt.err);
+#endif
}
{ /* Smart Power Down */
static const struct e1000_option opt = {
@@ -429,10 +463,13 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter)
if (num_CrcStripping > bd) {
unsigned int crc_stripping = CrcStripping[bd];
e1000_validate_option(&crc_stripping, &opt, adapter);
- if (crc_stripping == OPTION_ENABLED)
+ if (crc_stripping == OPTION_ENABLED) {
adapter->flags2 |= FLAG2_CRC_STRIPPING;
+ adapter->flags2 |= FLAG2_DFLT_CRC_STRIPPING;
+ }
} else {
adapter->flags2 |= FLAG2_CRC_STRIPPING;
+ adapter->flags2 |= FLAG2_DFLT_CRC_STRIPPING;
}
}
{ /* Kumeran Lock Loss Workaround */
diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
index 8666476cb9be..35b45578c604 100644
--- a/drivers/net/ethernet/intel/e1000e/phy.c
+++ b/drivers/net/ethernet/intel/e1000e/phy.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
+ Copyright(c) 1999 - 2012 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -26,8 +26,6 @@
*******************************************************************************/
-#include <linux/delay.h>
-
#include "e1000.h"
static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw);
@@ -132,30 +130,30 @@ s32 e1000e_get_phy_id(struct e1000_hw *hw)
u16 phy_id;
u16 retry_count = 0;
- if (!(phy->ops.read_reg))
- goto out;
+ if (!phy->ops.read_reg)
+ return 0;
while (retry_count < 2) {
ret_val = e1e_rphy(hw, PHY_ID1, &phy_id);
if (ret_val)
- goto out;
+ return ret_val;
phy->id = (u32)(phy_id << 16);
udelay(20);
ret_val = e1e_rphy(hw, PHY_ID2, &phy_id);
if (ret_val)
- goto out;
+ return ret_val;
phy->id |= (u32)(phy_id & PHY_REVISION_MASK);
phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK);
if (phy->id != 0 && phy->id != PHY_REVISION_MASK)
- goto out;
+ return 0;
retry_count++;
}
-out:
- return ret_val;
+
+ return 0;
}
/**
@@ -382,29 +380,25 @@ static s32 __e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data,
s32 ret_val = 0;
if (!locked) {
- if (!(hw->phy.ops.acquire))
- goto out;
+ if (!hw->phy.ops.acquire)
+ return 0;
ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
- goto out;
+ return ret_val;
}
- if (offset > MAX_PHY_MULTI_PAGE_REG) {
+ if (offset > MAX_PHY_MULTI_PAGE_REG)
ret_val = e1000e_write_phy_reg_mdic(hw,
IGP01E1000_PHY_PAGE_SELECT,
(u16)offset);
- if (ret_val)
- goto release;
- }
-
- ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
- data);
-
-release:
+ if (!ret_val)
+ ret_val = e1000e_read_phy_reg_mdic(hw,
+ MAX_PHY_REG_ADDRESS & offset,
+ data);
if (!locked)
hw->phy.ops.release(hw);
-out:
+
return ret_val;
}
@@ -453,30 +447,25 @@ static s32 __e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data,
s32 ret_val = 0;
if (!locked) {
- if (!(hw->phy.ops.acquire))
- goto out;
+ if (!hw->phy.ops.acquire)
+ return 0;
ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
- goto out;
+ return ret_val;
}
- if (offset > MAX_PHY_MULTI_PAGE_REG) {
+ if (offset > MAX_PHY_MULTI_PAGE_REG)
ret_val = e1000e_write_phy_reg_mdic(hw,
IGP01E1000_PHY_PAGE_SELECT,
(u16)offset);
- if (ret_val)
- goto release;
- }
-
- ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
- data);
-
-release:
+ if (!ret_val)
+ ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS &
+ offset,
+ data);
if (!locked)
hw->phy.ops.release(hw);
-out:
return ret_val;
}
@@ -523,15 +512,16 @@ static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data,
bool locked)
{
u32 kmrnctrlsta;
- s32 ret_val = 0;
if (!locked) {
- if (!(hw->phy.ops.acquire))
- goto out;
+ s32 ret_val = 0;
+
+ if (!hw->phy.ops.acquire)
+ return 0;
ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
- goto out;
+ return ret_val;
}
kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
@@ -547,8 +537,7 @@ static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data,
if (!locked)
hw->phy.ops.release(hw);
-out:
- return ret_val;
+ return 0;
}
/**
@@ -596,15 +585,16 @@ static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data,
bool locked)
{
u32 kmrnctrlsta;
- s32 ret_val = 0;
if (!locked) {
- if (!(hw->phy.ops.acquire))
- goto out;
+ s32 ret_val = 0;
+
+ if (!hw->phy.ops.acquire)
+ return 0;
ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
- goto out;
+ return ret_val;
}
kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
@@ -617,8 +607,7 @@ static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data,
if (!locked)
hw->phy.ops.release(hw);
-out:
- return ret_val;
+ return 0;
}
/**
@@ -663,17 +652,14 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
/* Enable CRS on Tx. This must be set for half-duplex operation. */
ret_val = e1e_rphy(hw, I82577_CFG_REG, &phy_data);
if (ret_val)
- goto out;
+ return ret_val;
phy_data |= I82577_CFG_ASSERT_CRS_ON_TX;
/* Enable downshift */
phy_data |= I82577_CFG_ENABLE_DOWNSHIFT;
- ret_val = e1e_wphy(hw, I82577_CFG_REG, phy_data);
-
-out:
- return ret_val;
+ return e1e_wphy(hw, I82577_CFG_REG, phy_data);
}
/**
@@ -1019,12 +1005,12 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
* The possible values of the "fc" parameter are:
* 0: Flow control is completely disabled
* 1: Rx flow control is enabled (we can receive pause frames
- * but not send pause frames).
+ * but not send pause frames).
* 2: Tx flow control is enabled (we can send pause frames
- * but we do not support receiving pause frames).
+ * but we do not support receiving pause frames).
* 3: Both Rx and Tx flow control (symmetric) are enabled.
* other: No software override. The flow control configuration
- * in the EEPROM is used.
+ * in the EEPROM is used.
*/
switch (hw->fc.current_mode) {
case e1000_fc_none:
@@ -1064,8 +1050,7 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
break;
default:
e_dbg("Flow control param set incorrectly\n");
- ret_val = -E1000_ERR_CONFIG;
- return ret_val;
+ return -E1000_ERR_CONFIG;
}
ret_val = e1e_wphy(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg);
@@ -1136,13 +1121,12 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
if (phy->autoneg_wait_to_complete) {
ret_val = e1000_wait_autoneg(hw);
if (ret_val) {
- e_dbg("Error while waiting for "
- "autoneg to complete\n");
+ e_dbg("Error while waiting for autoneg to complete\n");
return ret_val;
}
}
- hw->mac.get_link_status = 1;
+ hw->mac.get_link_status = true;
return ret_val;
}
@@ -1186,16 +1170,14 @@ s32 e1000e_setup_copper_link(struct e1000_hw *hw)
* Check link status. Wait up to 100 microseconds for link to become
* valid.
*/
- ret_val = e1000e_phy_has_link_generic(hw,
- COPPER_LINK_UP_LIMIT,
- 10,
- &link);
+ ret_val = e1000e_phy_has_link_generic(hw, COPPER_LINK_UP_LIMIT, 10,
+ &link);
if (ret_val)
return ret_val;
if (link) {
e_dbg("Valid link established!!!\n");
- e1000e_config_collision_dist(hw);
+ hw->mac.ops.config_collision_dist(hw);
ret_val = e1000e_config_fc_after_link_up(hw);
} else {
e_dbg("Unable to establish link!!!\n");
@@ -1251,10 +1233,8 @@ s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw)
if (phy->autoneg_wait_to_complete) {
e_dbg("Waiting for forced speed/duplex link on IGP phy.\n");
- ret_val = e1000e_phy_has_link_generic(hw,
- PHY_FORCE_LIMIT,
- 100000,
- &link);
+ ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+ 100000, &link);
if (ret_val)
return ret_val;
@@ -1262,12 +1242,8 @@ s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw)
e_dbg("Link taking longer than expected.\n");
/* Try once more */
- ret_val = e1000e_phy_has_link_generic(hw,
- PHY_FORCE_LIMIT,
- 100000,
- &link);
- if (ret_val)
- return ret_val;
+ ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+ 100000, &link);
}
return ret_val;
@@ -1401,25 +1377,25 @@ s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw)
ret_val = e1e_rphy(hw, PHY_CONTROL, &data);
if (ret_val)
- goto out;
+ return ret_val;
e1000e_phy_force_speed_duplex_setup(hw, &data);
ret_val = e1e_wphy(hw, PHY_CONTROL, data);
if (ret_val)
- goto out;
+ return ret_val;
/* Disable MDI-X support for 10/100 */
ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data);
if (ret_val)
- goto out;
+ return ret_val;
data &= ~IFE_PMC_AUTO_MDIX;
data &= ~IFE_PMC_FORCE_MDIX;
ret_val = e1e_wphy(hw, IFE_PHY_MDIX_CONTROL, data);
if (ret_val)
- goto out;
+ return ret_val;
e_dbg("IFE PMC: %X\n", data);
@@ -1428,27 +1404,22 @@ s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw)
if (phy->autoneg_wait_to_complete) {
e_dbg("Waiting for forced speed/duplex link on IFE phy.\n");
- ret_val = e1000e_phy_has_link_generic(hw,
- PHY_FORCE_LIMIT,
- 100000,
- &link);
+ ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+ 100000, &link);
if (ret_val)
- goto out;
+ return ret_val;
if (!link)
e_dbg("Link taking longer than expected.\n");
/* Try once more */
- ret_val = e1000e_phy_has_link_generic(hw,
- PHY_FORCE_LIMIT,
- 100000,
- &link);
+ ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+ 100000, &link);
if (ret_val)
- goto out;
+ return ret_val;
}
-out:
- return ret_val;
+ return 0;
}
/**
@@ -1506,7 +1477,7 @@ void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl)
e_dbg("Forcing 10mb\n");
}
- e1000e_config_collision_dist(hw);
+ hw->mac.ops.config_collision_dist(hw);
ew32(CTRL, ctrl);
}
@@ -1833,22 +1804,20 @@ s32 e1000e_get_cable_length_m88(struct e1000_hw *hw)
ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
if (ret_val)
- goto out;
+ return ret_val;
index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
M88E1000_PSSR_CABLE_LENGTH_SHIFT;
- if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) {
- ret_val = -E1000_ERR_PHY;
- goto out;
- }
+
+ if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1)
+ return -E1000_ERR_PHY;
phy->min_cable_length = e1000_m88_cable_length_table[index];
phy->max_cable_length = e1000_m88_cable_length_table[index + 1];
phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
-out:
- return ret_val;
+ return 0;
}
/**
@@ -1918,7 +1887,7 @@ s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw)
phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
- return ret_val;
+ return 0;
}
/**
@@ -2073,24 +2042,23 @@ s32 e1000_get_phy_info_ife(struct e1000_hw *hw)
ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
if (ret_val)
- goto out;
+ return ret_val;
if (!link) {
e_dbg("Phy info is only valid if link is up\n");
- ret_val = -E1000_ERR_CONFIG;
- goto out;
+ return -E1000_ERR_CONFIG;
}
ret_val = e1e_rphy(hw, IFE_PHY_SPECIAL_CONTROL, &data);
if (ret_val)
- goto out;
+ return ret_val;
phy->polarity_correction = (data & IFE_PSC_AUTO_POLARITY_DISABLE)
? false : true;
if (phy->polarity_correction) {
ret_val = e1000_check_polarity_ife(hw);
if (ret_val)
- goto out;
+ return ret_val;
} else {
/* Polarity is forced */
phy->cable_polarity = (data & IFE_PSC_FORCE_POLARITY)
@@ -2100,7 +2068,7 @@ s32 e1000_get_phy_info_ife(struct e1000_hw *hw)
ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data);
if (ret_val)
- goto out;
+ return ret_val;
phy->is_mdix = (data & IFE_PMC_MDIX_STATUS) ? true : false;
@@ -2109,8 +2077,7 @@ s32 e1000_get_phy_info_ife(struct e1000_hw *hw)
phy->local_rx = e1000_1000t_rx_status_undefined;
phy->remote_rx = e1000_1000t_rx_status_undefined;
-out:
- return ret_val;
+ return 0;
}
/**
@@ -2154,7 +2121,7 @@ s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw)
s32 ret_val;
u32 ctrl;
- ret_val = e1000_check_reset_block(hw);
+ ret_val = phy->ops.check_reset_block(hw);
if (ret_val)
return 0;
@@ -2188,6 +2155,7 @@ s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw)
s32 e1000e_get_cfg_done(struct e1000_hw *hw)
{
mdelay(10);
+
return 0;
}
@@ -2369,7 +2337,6 @@ enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id)
**/
s32 e1000e_determine_phy_address(struct e1000_hw *hw)
{
- s32 ret_val = -E1000_ERR_PHY_TYPE;
u32 phy_addr = 0;
u32 i;
enum e1000_phy_type phy_type = e1000_phy_unknown;
@@ -2388,17 +2355,15 @@ s32 e1000e_determine_phy_address(struct e1000_hw *hw)
* If phy_type is valid, break - we found our
* PHY address
*/
- if (phy_type != e1000_phy_unknown) {
- ret_val = 0;
- goto out;
- }
+ if (phy_type != e1000_phy_unknown)
+ return 0;
+
usleep_range(1000, 2000);
i++;
} while (i < 10);
}
-out:
- return ret_val;
+ return -E1000_ERR_PHY_TYPE;
}
/**
@@ -2439,7 +2404,7 @@ s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data)
if (page == BM_WUC_PAGE) {
ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data,
false, false);
- goto out;
+ goto release;
}
hw->phy.addr = e1000_get_phy_addr_for_bm_page(page, offset);
@@ -2464,13 +2429,13 @@ s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data)
ret_val = e1000e_write_phy_reg_mdic(hw, page_select,
(page << page_shift));
if (ret_val)
- goto out;
+ goto release;
}
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
data);
-out:
+release:
hw->phy.ops.release(hw);
return ret_val;
}
@@ -2498,7 +2463,7 @@ s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data)
if (page == BM_WUC_PAGE) {
ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data,
true, false);
- goto out;
+ goto release;
}
hw->phy.addr = e1000_get_phy_addr_for_bm_page(page, offset);
@@ -2523,12 +2488,12 @@ s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data)
ret_val = e1000e_write_phy_reg_mdic(hw, page_select,
(page << page_shift));
if (ret_val)
- goto out;
+ goto release;
}
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
data);
-out:
+release:
hw->phy.ops.release(hw);
return ret_val;
}
@@ -2556,7 +2521,7 @@ s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data)
if (page == BM_WUC_PAGE) {
ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data,
true, false);
- goto out;
+ goto release;
}
hw->phy.addr = 1;
@@ -2568,12 +2533,12 @@ s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data)
page);
if (ret_val)
- goto out;
+ goto release;
}
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
data);
-out:
+release:
hw->phy.ops.release(hw);
return ret_val;
}
@@ -2600,7 +2565,7 @@ s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data)
if (page == BM_WUC_PAGE) {
ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data,
false, false);
- goto out;
+ goto release;
}
hw->phy.addr = 1;
@@ -2611,13 +2576,13 @@ s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data)
page);
if (ret_val)
- goto out;
+ goto release;
}
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
data);
-out:
+release:
hw->phy.ops.release(hw);
return ret_val;
}
@@ -2642,14 +2607,14 @@ s32 e1000_enable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg)
ret_val = e1000_set_page_igp(hw, (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT));
if (ret_val) {
e_dbg("Could not set Port Control page\n");
- goto out;
+ return ret_val;
}
ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
if (ret_val) {
e_dbg("Could not read PHY register %d.%d\n",
BM_PORT_CTRL_PAGE, BM_WUC_ENABLE_REG);
- goto out;
+ return ret_val;
}
/*
@@ -2664,15 +2629,14 @@ s32 e1000_enable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg)
if (ret_val) {
e_dbg("Could not write PHY register %d.%d\n",
BM_PORT_CTRL_PAGE, BM_WUC_ENABLE_REG);
- goto out;
+ return ret_val;
}
- /* Select Host Wakeup Registers page */
- ret_val = e1000_set_page_igp(hw, (BM_WUC_PAGE << IGP_PAGE_SHIFT));
-
- /* caller now able to write registers on the Wakeup registers page */
-out:
- return ret_val;
+ /*
+ * Select Host Wakeup Registers page - caller now able to write
+ * registers on the Wakeup registers page
+ */
+ return e1000_set_page_igp(hw, (BM_WUC_PAGE << IGP_PAGE_SHIFT));
}
/**
@@ -2694,7 +2658,7 @@ s32 e1000_disable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg)
ret_val = e1000_set_page_igp(hw, (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT));
if (ret_val) {
e_dbg("Could not set Port Control page\n");
- goto out;
+ return ret_val;
}
/* Restore 769.17 to its original value */
@@ -2702,7 +2666,7 @@ s32 e1000_disable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg)
if (ret_val)
e_dbg("Could not restore PHY register %d.%d\n",
BM_PORT_CTRL_PAGE, BM_WUC_ENABLE_REG);
-out:
+
return ret_val;
}
@@ -2750,7 +2714,7 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
ret_val = e1000_enable_phy_wakeup_reg_access_bm(hw, &phy_reg);
if (ret_val) {
e_dbg("Could not enable PHY wakeup reg access\n");
- goto out;
+ return ret_val;
}
}
@@ -2760,7 +2724,7 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ADDRESS_OPCODE, reg);
if (ret_val) {
e_dbg("Could not write address opcode to page %d\n", page);
- goto out;
+ return ret_val;
}
if (read) {
@@ -2775,13 +2739,12 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
if (ret_val) {
e_dbg("Could not access PHY reg %d.%d\n", page, reg);
- goto out;
+ return ret_val;
}
if (!page_set)
ret_val = e1000_disable_phy_wakeup_reg_access_bm(hw, &phy_reg);
-out:
return ret_val;
}
@@ -3137,7 +3100,7 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
ret_val = e1000e_write_phy_reg_mdic(hw, addr_reg, (u16)offset & 0x3F);
if (ret_val) {
e_dbg("Could not write the Address Offset port register\n");
- goto out;
+ return ret_val;
}
/* Read or write the data value next */
@@ -3146,12 +3109,9 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
else
ret_val = e1000e_write_phy_reg_mdic(hw, data_reg, *data);
- if (ret_val) {
+ if (ret_val)
e_dbg("Could not access the Data port register\n");
- goto out;
- }
-out:
return ret_val;
}
@@ -3172,39 +3132,34 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw)
u16 data;
if (hw->phy.type != e1000_phy_82578)
- goto out;
+ return 0;
/* Do not apply workaround if in PHY loopback bit 14 set */
e1e_rphy(hw, PHY_CONTROL, &data);
if (data & PHY_CONTROL_LB)
- goto out;
+ return 0;
/* check if link is up and at 1Gbps */
ret_val = e1e_rphy(hw, BM_CS_STATUS, &data);
if (ret_val)
- goto out;
+ return ret_val;
- data &= BM_CS_STATUS_LINK_UP |
- BM_CS_STATUS_RESOLVED |
- BM_CS_STATUS_SPEED_MASK;
+ data &= BM_CS_STATUS_LINK_UP | BM_CS_STATUS_RESOLVED |
+ BM_CS_STATUS_SPEED_MASK;
- if (data != (BM_CS_STATUS_LINK_UP |
- BM_CS_STATUS_RESOLVED |
- BM_CS_STATUS_SPEED_1000))
- goto out;
+ if (data != (BM_CS_STATUS_LINK_UP | BM_CS_STATUS_RESOLVED |
+ BM_CS_STATUS_SPEED_1000))
+ return 0;
- mdelay(200);
+ msleep(200);
/* flush the packets in the fifo buffer */
ret_val = e1e_wphy(hw, HV_MUX_DATA_CTRL, HV_MUX_DATA_CTRL_GEN_TO_MAC |
HV_MUX_DATA_CTRL_FORCE_SPEED);
if (ret_val)
- goto out;
-
- ret_val = e1e_wphy(hw, HV_MUX_DATA_CTRL, HV_MUX_DATA_CTRL_GEN_TO_MAC);
+ return ret_val;
-out:
- return ret_val;
+ return e1e_wphy(hw, HV_MUX_DATA_CTRL, HV_MUX_DATA_CTRL_GEN_TO_MAC);
}
/**
@@ -3246,39 +3201,32 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data);
if (ret_val)
- goto out;
+ return ret_val;
e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data);
if (ret_val)
- goto out;
+ return ret_val;
udelay(1);
if (phy->autoneg_wait_to_complete) {
e_dbg("Waiting for forced speed/duplex link on 82577 phy\n");
- ret_val = e1000e_phy_has_link_generic(hw,
- PHY_FORCE_LIMIT,
- 100000,
- &link);
+ ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+ 100000, &link);
if (ret_val)
- goto out;
+ return ret_val;
if (!link)
e_dbg("Link taking longer than expected.\n");
/* Try once more */
- ret_val = e1000e_phy_has_link_generic(hw,
- PHY_FORCE_LIMIT,
- 100000,
- &link);
- if (ret_val)
- goto out;
+ ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+ 100000, &link);
}
-out:
return ret_val;
}
@@ -3300,23 +3248,22 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
if (ret_val)
- goto out;
+ return ret_val;
if (!link) {
e_dbg("Phy info is only valid if link is up\n");
- ret_val = -E1000_ERR_CONFIG;
- goto out;
+ return -E1000_ERR_CONFIG;
}
phy->polarity_correction = true;
ret_val = e1000_check_polarity_82577(hw);
if (ret_val)
- goto out;
+ return ret_val;
ret_val = e1e_rphy(hw, I82577_PHY_STATUS_2, &data);
if (ret_val)
- goto out;
+ return ret_val;
phy->is_mdix = (data & I82577_PHY_STATUS2_MDIX) ? true : false;
@@ -3324,11 +3271,11 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
I82577_PHY_STATUS2_SPEED_1000MBPS) {
ret_val = hw->phy.ops.get_cable_length(hw);
if (ret_val)
- goto out;
+ return ret_val;
ret_val = e1e_rphy(hw, PHY_1000T_STATUS, &data);
if (ret_val)
- goto out;
+ return ret_val;
phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS)
? e1000_1000t_rx_status_ok
@@ -3343,8 +3290,7 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
phy->remote_rx = e1000_1000t_rx_status_undefined;
}
-out:
- return ret_val;
+ return 0;
}
/**
@@ -3362,7 +3308,7 @@ s32 e1000_get_cable_length_82577(struct e1000_hw *hw)
ret_val = e1e_rphy(hw, I82577_PHY_DIAG_STATUS, &phy_data);
if (ret_val)
- goto out;
+ return ret_val;
length = (phy_data & I82577_DSTATUS_CABLE_LENGTH) >>
I82577_DSTATUS_CABLE_LENGTH_SHIFT;
@@ -3372,6 +3318,5 @@ s32 e1000_get_cable_length_82577(struct e1000_hw *hw)
phy->cable_length = length;
-out:
- return ret_val;
+ return 0;
}
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.