diff options
Diffstat (limited to 'drivers/net/ethernet/intel/i40e/i40e_common.c')
| -rw-r--r-- | drivers/net/ethernet/intel/i40e/i40e_common.c | 63 |
1 files changed, 23 insertions, 40 deletions
diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c index c0a3dae8a2db..eb2d1530d331 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_common.c +++ b/drivers/net/ethernet/intel/i40e/i40e_common.c @@ -1,29 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/******************************************************************************* - * - * Intel Ethernet Controller XL710 Family Linux Driver - * Copyright(c) 2013 - 2016 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along - * with this program. If not, see <http://www.gnu.org/licenses/>. - * - * The full GNU General Public License is included in this distribution in - * the file called "COPYING". - * - * Contact Information: - * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - ******************************************************************************/ +/* Copyright(c) 2013 - 2018 Intel Corporation. */ #include "i40e_type.h" #include "i40e_adminq.h" @@ -1695,6 +1671,8 @@ enum i40e_status_code i40e_aq_set_phy_config(struct i40e_hw *hw, /** * i40e_set_fc * @hw: pointer to the hw struct + * @aq_failures: buffer to return AdminQ failure information + * @atomic_restart: whether to enable atomic link restart * * Set the requested flow control mode using set_phy_config. **/ @@ -2831,8 +2809,8 @@ i40e_status i40e_aq_remove_macvlan(struct i40e_hw *hw, u16 seid, * @mr_list: list of mirrored VSI SEIDs or VLAN IDs * @cmd_details: pointer to command details structure or NULL * @rule_id: Rule ID returned from FW - * @rule_used: Number of rules used in internal switch - * @rule_free: Number of rules free in internal switch + * @rules_used: Number of rules used in internal switch + * @rules_free: Number of rules free in internal switch * * Add/Delete a mirror rule to a specific switch. Mirror rules are supported for * VEBs/VEPA elements only @@ -2892,8 +2870,8 @@ static i40e_status i40e_mirrorrule_op(struct i40e_hw *hw, * @mr_list: list of mirrored VSI SEIDs or VLAN IDs * @cmd_details: pointer to command details structure or NULL * @rule_id: Rule ID returned from FW - * @rule_used: Number of rules used in internal switch - * @rule_free: Number of rules free in internal switch + * @rules_used: Number of rules used in internal switch + * @rules_free: Number of rules free in internal switch * * Add mirror rule. Mirror rules are supported for VEBs or VEPA elements only **/ @@ -2923,8 +2901,8 @@ i40e_status i40e_aq_add_mirrorrule(struct i40e_hw *hw, u16 sw_seid, * add_mirrorrule. * @mr_list: list of mirrored VLAN IDs to be removed * @cmd_details: pointer to command details structure or NULL - * @rule_used: Number of rules used in internal switch - * @rule_free: Number of rules free in internal switch + * @rules_used: Number of rules used in internal switch + * @rules_free: Number of rules free in internal switch * * Delete a mirror rule. Mirror rules are supported for VEBs/VEPA elements only **/ @@ -3672,6 +3650,8 @@ i40e_status i40e_aq_stop_lldp(struct i40e_hw *hw, bool shutdown_agent, /** * i40e_aq_start_lldp * @hw: pointer to the hw struct + * @buff: buffer for result + * @buff_size: buffer size * @cmd_details: pointer to command details structure or NULL * * Start the embedded LLDP Agent on all ports. @@ -3752,7 +3732,6 @@ i40e_status i40e_aq_get_cee_dcb_config(struct i40e_hw *hw, * i40e_aq_add_udp_tunnel * @hw: pointer to the hw struct * @udp_port: the UDP port to add in Host byte order - * @header_len: length of the tunneling header length in DWords * @protocol_index: protocol index type * @filter_index: pointer to filter index * @cmd_details: pointer to command details structure or NULL @@ -3971,6 +3950,7 @@ i40e_status i40e_aq_config_vsi_tc_bw(struct i40e_hw *hw, * @hw: pointer to the hw struct * @seid: seid of the switching component connected to Physical Port * @ets_data: Buffer holding ETS parameters + * @opcode: Tx scheduler AQ command opcode * @cmd_details: pointer to command details structure or NULL **/ i40e_status i40e_aq_config_switch_comp_ets(struct i40e_hw *hw, @@ -4314,10 +4294,10 @@ i40e_status i40e_aq_add_rem_control_packet_filter(struct i40e_hw *hw, * @hw: pointer to the hw struct * @seid: VSI seid to add ethertype filter from **/ -#define I40E_FLOW_CONTROL_ETHTYPE 0x8808 void i40e_add_filter_to_drop_tx_flow_control_frames(struct i40e_hw *hw, u16 seid) { +#define I40E_FLOW_CONTROL_ETHTYPE 0x8808 u16 flag = I40E_AQC_ADD_CONTROL_PACKET_FLAGS_IGNORE_MAC | I40E_AQC_ADD_CONTROL_PACKET_FLAGS_DROP | I40E_AQC_ADD_CONTROL_PACKET_FLAGS_TX; @@ -4448,6 +4428,7 @@ void i40e_set_pci_config_data(struct i40e_hw *hw, u16 link_status) * @ret_buff_size: actual buffer size returned * @ret_next_table: next block to read * @ret_next_index: next index to read + * @cmd_details: pointer to command details structure or NULL * * Dump internal FW/HW data for debug purposes. * @@ -4574,7 +4555,7 @@ i40e_status i40e_aq_configure_partition_bw(struct i40e_hw *hw, * i40e_read_phy_register_clause22 * @hw: pointer to the HW structure * @reg: register address in the page - * @phy_adr: PHY address on MDIO interface + * @phy_addr: PHY address on MDIO interface * @value: PHY register value * * Reads specified PHY register value @@ -4619,7 +4600,7 @@ i40e_status i40e_read_phy_register_clause22(struct i40e_hw *hw, * i40e_write_phy_register_clause22 * @hw: pointer to the HW structure * @reg: register address in the page - * @phy_adr: PHY address on MDIO interface + * @phy_addr: PHY address on MDIO interface * @value: PHY register value * * Writes specified PHY register value @@ -4660,7 +4641,7 @@ i40e_status i40e_write_phy_register_clause22(struct i40e_hw *hw, * @hw: pointer to the HW structure * @page: registers page number * @reg: register address in the page - * @phy_adr: PHY address on MDIO interface + * @phy_addr: PHY address on MDIO interface * @value: PHY register value * * Reads specified PHY register value @@ -4734,7 +4715,7 @@ phy_read_end: * @hw: pointer to the HW structure * @page: registers page number * @reg: register address in the page - * @phy_adr: PHY address on MDIO interface + * @phy_addr: PHY address on MDIO interface * @value: PHY register value * * Writes value to specified PHY register @@ -4801,7 +4782,7 @@ phy_write_end: * @hw: pointer to the HW structure * @page: registers page number * @reg: register address in the page - * @phy_adr: PHY address on MDIO interface + * @phy_addr: PHY address on MDIO interface * @value: PHY register value * * Writes value to specified PHY register @@ -4837,7 +4818,7 @@ i40e_status i40e_write_phy_register(struct i40e_hw *hw, * @hw: pointer to the HW structure * @page: registers page number * @reg: register address in the page - * @phy_adr: PHY address on MDIO interface + * @phy_addr: PHY address on MDIO interface * @value: PHY register value * * Reads specified PHY register value @@ -4872,7 +4853,6 @@ i40e_status i40e_read_phy_register(struct i40e_hw *hw, * i40e_get_phy_address * @hw: pointer to the HW structure * @dev_num: PHY port num that address we want - * @phy_addr: Returned PHY address * * Gets PHY address for current port **/ @@ -5082,7 +5062,9 @@ i40e_status i40e_led_get_phy(struct i40e_hw *hw, u16 *led_addr, * i40e_led_set_phy * @hw: pointer to the HW structure * @on: true or false + * @led_addr: address of led register to use * @mode: original val plus bit for set or ignore + * * Set led's on or off when controlled by the PHY * **/ @@ -5371,6 +5353,7 @@ i40e_status_code i40e_aq_write_ddp(struct i40e_hw *hw, void *buff, * @hw: pointer to the hw struct * @buff: command buffer (size in bytes = buff_size) * @buff_size: buffer size in bytes + * @flags: AdminQ command flags * @cmd_details: pointer to command details structure or NULL **/ enum |