diff options
Diffstat (limited to 'drivers/net/ethernet/intel/i40e/i40e_ptp.c')
| -rw-r--r-- | drivers/net/ethernet/intel/i40e/i40e_ptp.c | 44 |
1 files changed, 31 insertions, 13 deletions
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ptp.c b/drivers/net/ethernet/intel/i40e/i40e_ptp.c index 6d1ec926aa37..fabcfa1b45b2 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_ptp.c +++ b/drivers/net/ethernet/intel/i40e/i40e_ptp.c @@ -247,7 +247,12 @@ void i40e_ptp_rx_hang(struct i40e_vsi *vsi) u32 prttsyn_stat; int n; - if (!(pf->flags & I40E_FLAG_PTP)) + /* Since we cannot turn off the Rx timestamp logic if the device is + * configured for Tx timestamping, we check if Rx timestamping is + * configured. We don't want to spuriously warn about Rx timestamp + * hangs if we don't care about the timestamps. + */ + if (!(pf->flags & I40E_FLAG_PTP) || !pf->ptp_rx) return; prttsyn_stat = rd32(hw, I40E_PRTTSYN_STAT_1); @@ -305,6 +310,13 @@ void i40e_ptp_tx_hwtstamp(struct i40e_pf *pf) u32 hi, lo; u64 ns; + if (!(pf->flags & I40E_FLAG_PTP) || !pf->ptp_tx) + return; + + /* don't attempt to timestamp if we don't have an skb */ + if (!pf->ptp_tx_skb) + return; + lo = rd32(hw, I40E_PRTTSYN_TXTIME_L); hi = rd32(hw, I40E_PRTTSYN_TXTIME_H); @@ -338,7 +350,7 @@ void i40e_ptp_rx_hwtstamp(struct i40e_pf *pf, struct sk_buff *skb, u8 index) /* Since we cannot turn off the Rx timestamp logic if the device is * doing Tx timestamping, check if Rx timestamping is configured. */ - if (!pf->ptp_rx) + if (!(pf->flags & I40E_FLAG_PTP) || !pf->ptp_rx) return; hw = &pf->hw; @@ -467,7 +479,12 @@ static int i40e_ptp_set_timestamp_mode(struct i40e_pf *pf, switch (config->rx_filter) { case HWTSTAMP_FILTER_NONE: pf->ptp_rx = false; - tsyntype = 0; + /* We set the type to V1, but do not enable UDP packet + * recognition. In this way, we should be as close to + * disabling PTP Rx timestamps as possible since V1 packets + * are always UDP, since L2 packets are a V2 feature. + */ + tsyntype = I40E_PRTTSYN_CTL1_TSYNTYPE_V1; break; case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: @@ -521,17 +538,18 @@ static int i40e_ptp_set_timestamp_mode(struct i40e_pf *pf, regval &= ~I40E_PFINT_ICR0_ENA_TIMESYNC_MASK; wr32(hw, I40E_PFINT_ICR0_ENA, regval); - /* There is no simple on/off switch for Rx. To "disable" Rx support, - * ignore any received timestamps, rather than turn off the clock. + /* Although there is no simple on/off switch for Rx, we "disable" Rx + * timestamps by setting to V1 only mode and clear the UDP + * recognition. This ought to disable all PTP Rx timestamps as V1 + * packets are always over UDP. Note that software is configured to + * ignore Rx timestamps via the pf->ptp_rx flag. */ - if (pf->ptp_rx) { - regval = rd32(hw, I40E_PRTTSYN_CTL1); - /* clear everything but the enable bit */ - regval &= I40E_PRTTSYN_CTL1_TSYNENA_MASK; - /* now enable bits for desired Rx timestamps */ - regval |= tsyntype; - wr32(hw, I40E_PRTTSYN_CTL1, regval); - } + regval = rd32(hw, I40E_PRTTSYN_CTL1); + /* clear everything but the enable bit */ + regval &= I40E_PRTTSYN_CTL1_TSYNENA_MASK; + /* now enable bits for desired Rx timestamps */ + regval |= tsyntype; + wr32(hw, I40E_PRTTSYN_CTL1, regval); return 0; } |