diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/net/ethernet/intel/igb/igb_main.c | 15 |
1 files changed, 7 insertions, 8 deletions
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 33b3a16dabe1..f145adbb55ac 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -2199,11 +2199,11 @@ static void igb_init_mas(struct igb_adapter *adapter) **/ static s32 igb_init_i2c(struct igb_adapter *adapter) { - s32 status = E1000_SUCCESS; + s32 status = 0; /* I2C interface supported on i350 devices */ if (adapter->hw.mac.type != e1000_i350) - return E1000_SUCCESS; + return 0; /* Initialize the i2c bus which is controlled by the registers. * This bus will use the i2c_algo_bit structue that implements @@ -7935,7 +7935,7 @@ static int igb_ndo_set_vf_spoofchk(struct net_device *netdev, int vf, wr32(reg_offset, reg_val); adapter->vf_data[vf].spoofchk_enabled = setting; - return E1000_SUCCESS; + return 0; } static int igb_ndo_get_vf_config(struct net_device *netdev, @@ -8097,8 +8097,7 @@ s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset, swfw_mask = E1000_SWFW_PHY0_SM; - if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) - != E1000_SUCCESS) + if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask)) return E1000_ERR_SWFW_SYNC; status = i2c_smbus_read_byte_data(this_client, byte_offset); @@ -8108,7 +8107,7 @@ s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset, return E1000_ERR_I2C; else { *data = status; - return E1000_SUCCESS; + return 0; } } @@ -8133,7 +8132,7 @@ s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset, if (!this_client) return E1000_ERR_I2C; - if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != E1000_SUCCESS) + if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask)) return E1000_ERR_SWFW_SYNC; status = i2c_smbus_write_byte_data(this_client, byte_offset, data); hw->mac.ops.release_swfw_sync(hw, swfw_mask); @@ -8141,7 +8140,7 @@ s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset, if (status) return E1000_ERR_I2C; else - return E1000_SUCCESS; + return 0; } |