diff options
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c')
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c | 57 |
1 files changed, 23 insertions, 34 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c index 1073aea5da40..203a00c24330 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -45,21 +45,17 @@ static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, ixgbe_link_speed speed, - bool autoneg, bool autoneg_wait_to_complete); static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, ixgbe_link_speed speed, - bool autoneg, bool autoneg_wait_to_complete); static s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, bool autoneg_wait_to_complete); static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, ixgbe_link_speed speed, - bool autoneg, bool autoneg_wait_to_complete); static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, ixgbe_link_speed speed, - bool autoneg, bool autoneg_wait_to_complete); static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw); @@ -234,13 +230,13 @@ static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw) * ixgbe_get_link_capabilities_82599 - Determines link capabilities * @hw: pointer to hardware structure * @speed: pointer to link speed - * @negotiation: true when autoneg or autotry is enabled + * @autoneg: true when autoneg or autotry is enabled * * Determines the link capabilities by reading the AUTOC register. **/ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, ixgbe_link_speed *speed, - bool *negotiation) + bool *autoneg) { s32 status = 0; u32 autoc = 0; @@ -251,7 +247,7 @@ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 || hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) { *speed = IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = true; + *autoneg = true; goto out; } @@ -268,22 +264,22 @@ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, switch (autoc & IXGBE_AUTOC_LMS_MASK) { case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: *speed = IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = false; + *autoneg = false; break; case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: *speed = IXGBE_LINK_SPEED_10GB_FULL; - *negotiation = false; + *autoneg = false; break; case IXGBE_AUTOC_LMS_1G_AN: *speed = IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = true; + *autoneg = true; break; case IXGBE_AUTOC_LMS_10G_SERIAL: *speed = IXGBE_LINK_SPEED_10GB_FULL; - *negotiation = false; + *autoneg = false; break; case IXGBE_AUTOC_LMS_KX4_KX_KR: @@ -295,7 +291,7 @@ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, *speed |= IXGBE_LINK_SPEED_10GB_FULL; if (autoc & IXGBE_AUTOC_KX_SUPP) *speed |= IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = true; + *autoneg = true; break; case IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII: @@ -306,12 +302,12 @@ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, *speed |= IXGBE_LINK_SPEED_10GB_FULL; if (autoc & IXGBE_AUTOC_KX_SUPP) *speed |= IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = true; + *autoneg = true; break; case IXGBE_AUTOC_LMS_SGMII_1G_100M: *speed = IXGBE_LINK_SPEED_1GB_FULL | IXGBE_LINK_SPEED_100_FULL; - *negotiation = false; + *autoneg = false; break; default: @@ -323,7 +319,7 @@ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, if (hw->phy.multispeed_fiber) { *speed |= IXGBE_LINK_SPEED_10GB_FULL | IXGBE_LINK_SPEED_1GB_FULL; - *negotiation = true; + *autoneg = true; } out: @@ -510,14 +506,12 @@ static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) * ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed * @hw: pointer to hardware structure * @speed: new link speed - * @autoneg: true if autonegotiation enabled * @autoneg_wait_to_complete: true when waiting for completion is needed * * Set the link speed in the AUTOC register and restarts link. **/ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, ixgbe_link_speed speed, - bool autoneg, bool autoneg_wait_to_complete) { s32 status = 0; @@ -527,11 +521,11 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); u32 i = 0; bool link_up = false; - bool negotiation; + bool autoneg = false; /* Mask off requested but non-supported speeds */ status = hw->mac.ops.get_link_capabilities(hw, &link_speed, - &negotiation); + &autoneg); if (status != 0) return status; @@ -564,7 +558,6 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, status = ixgbe_setup_mac_link_82599(hw, IXGBE_LINK_SPEED_10GB_FULL, - autoneg, autoneg_wait_to_complete); if (status != 0) return status; @@ -617,7 +610,6 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, status = ixgbe_setup_mac_link_82599(hw, IXGBE_LINK_SPEED_1GB_FULL, - autoneg, autoneg_wait_to_complete); if (status != 0) return status; @@ -646,7 +638,6 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, if (speedcnt > 1) status = ixgbe_setup_mac_link_multispeed_fiber(hw, highest_link_speed, - autoneg, autoneg_wait_to_complete); out: @@ -666,13 +657,12 @@ out: * ixgbe_setup_mac_link_smartspeed - Set MAC link speed using SmartSpeed * @hw: pointer to hardware structure * @speed: new link speed - * @autoneg: true if autonegotiation enabled * @autoneg_wait_to_complete: true when waiting for completion is needed * * Implements the Intel SmartSpeed algorithm. **/ static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, - ixgbe_link_speed speed, bool autoneg, + ixgbe_link_speed speed, bool autoneg_wait_to_complete) { s32 status = 0; @@ -703,7 +693,7 @@ static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, /* First, try to get link with full advertisement */ hw->phy.smart_speed_active = false; for (j = 0; j < IXGBE_SMARTSPEED_MAX_RETRIES; j++) { - status = ixgbe_setup_mac_link_82599(hw, speed, autoneg, + status = ixgbe_setup_mac_link_82599(hw, speed, autoneg_wait_to_complete); if (status != 0) goto out; @@ -738,7 +728,7 @@ static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, /* Turn SmartSpeed on to disable KR support */ hw->phy.smart_speed_active = true; - status = ixgbe_setup_mac_link_82599(hw, speed, autoneg, + status = ixgbe_setup_mac_link_82599(hw, speed, autoneg_wait_to_complete); if (status != 0) goto out; @@ -764,7 +754,7 @@ static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, /* We didn't get link. Turn SmartSpeed back off. */ hw->phy.smart_speed_active = false; - status = ixgbe_setup_mac_link_82599(hw, speed, autoneg, + status = ixgbe_setup_mac_link_82599(hw, speed, autoneg_wait_to_complete); out: @@ -778,14 +768,13 @@ out: * ixgbe_setup_mac_link_82599 - Set MAC link speed * @hw: pointer to hardware structure * @speed: new link speed - * @autoneg: true if autonegotiation enabled * @autoneg_wait_to_complete: true when waiting for completion is needed * * Set the link speed in the AUTOC register and restarts link. **/ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, - ixgbe_link_speed speed, bool autoneg, - bool autoneg_wait_to_complete) + ixgbe_link_speed speed, + bool autoneg_wait_to_complete) { s32 status = 0; u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); @@ -799,6 +788,7 @@ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, u32 i; ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN; bool got_lock = false; + bool autoneg = false; /* Check to see if speed passed in is supported. */ status = hw->mac.ops.get_link_capabilities(hw, &link_capabilities, @@ -911,20 +901,18 @@ out: * ixgbe_setup_copper_link_82599 - Set the PHY autoneg advertised field * @hw: pointer to hardware structure * @speed: new link speed - * @autoneg: true if autonegotiation enabled * @autoneg_wait_to_complete: true if waiting is needed to complete * * Restarts link on PHY and MAC based on settings passed in. **/ static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, ixgbe_link_speed speed, - bool autoneg, bool autoneg_wait_to_complete) { s32 status; /* Setup the PHY according to input speed */ - status = hw->phy.ops.setup_link_speed(hw, speed, autoneg, + status = hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait_to_complete); /* Set up MAC */ ixgbe_start_mac_link_82599(hw, autoneg_wait_to_complete); @@ -2253,6 +2241,7 @@ static struct ixgbe_phy_operations phy_ops_82599 = { .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, .read_i2c_byte = &ixgbe_read_i2c_byte_generic, .write_i2c_byte = &ixgbe_write_i2c_byte_generic, + .read_i2c_sff8472 = &ixgbe_read_i2c_sff8472_generic, .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic, .write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic, .check_overtemp = &ixgbe_tn_check_overtemp, |