aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_common.c')
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_common.c157
1 files changed, 102 insertions, 55 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 9bcdeb89af5a..b5c434b617b1 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -65,17 +65,42 @@ static s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw);
* function check the device id to see if the associated phy supports
* autoneg flow control.
**/
-s32 ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw)
+bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw)
{
+ bool supported = false;
+ ixgbe_link_speed speed;
+ bool link_up;
- switch (hw->device_id) {
- case IXGBE_DEV_ID_X540T:
- case IXGBE_DEV_ID_X540T1:
- case IXGBE_DEV_ID_82599_T3_LOM:
- return 0;
+ switch (hw->phy.media_type) {
+ case ixgbe_media_type_fiber_fixed:
+ case ixgbe_media_type_fiber:
+ hw->mac.ops.check_link(hw, &speed, &link_up, false);
+ /* if link is down, assume supported */
+ if (link_up)
+ supported = speed == IXGBE_LINK_SPEED_1GB_FULL ?
+ true : false;
+ else
+ supported = true;
+ break;
+ case ixgbe_media_type_backplane:
+ supported = true;
+ break;
+ case ixgbe_media_type_copper:
+ /* only some copper devices support flow control autoneg */
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_82599_T3_LOM:
+ case IXGBE_DEV_ID_X540T:
+ case IXGBE_DEV_ID_X540T1:
+ supported = true;
+ break;
+ default:
+ break;
+ }
default:
- return IXGBE_ERR_FC_NOT_SUPPORTED;
+ break;
}
+
+ return supported;
}
/**
@@ -114,6 +139,7 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw)
* we link at 10G, the 1G advertisement is harmless and vice versa.
*/
switch (hw->phy.media_type) {
+ case ixgbe_media_type_fiber_fixed:
case ixgbe_media_type_fiber:
case ixgbe_media_type_backplane:
reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
@@ -234,7 +260,7 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw)
IXGBE_GSSR_MAC_CSR_SM);
} else if ((hw->phy.media_type == ixgbe_media_type_copper) &&
- (ixgbe_device_supports_autoneg_fc(hw) == 0)) {
+ ixgbe_device_supports_autoneg_fc(hw)) {
hw->phy.ops.write_reg(hw, MDIO_AN_ADVERTISE,
MDIO_MMD_AN, reg_cu);
}
@@ -2380,6 +2406,7 @@ void ixgbe_fc_autoneg(struct ixgbe_hw *hw)
switch (hw->phy.media_type) {
/* Autoneg flow control on fiber adapters */
+ case ixgbe_media_type_fiber_fixed:
case ixgbe_media_type_fiber:
if (speed == IXGBE_LINK_SPEED_1GB_FULL)
ret_val = ixgbe_fc_autoneg_fiber(hw);
@@ -2392,7 +2419,7 @@ void ixgbe_fc_autoneg(struct ixgbe_hw *hw)
/* Autoneg flow control on copper adapters */
case ixgbe_media_type_copper:
- if (ixgbe_device_supports_autoneg_fc(hw) == 0)
+ if (ixgbe_device_supports_autoneg_fc(hw))
ret_val = ixgbe_fc_autoneg_copper(hw);
break;
@@ -2479,42 +2506,39 @@ out:
**/
s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask)
{
- u32 gssr;
+ u32 gssr = 0;
u32 swmask = mask;
u32 fwmask = mask << 5;
- s32 timeout = 200;
+ u32 timeout = 200;
+ u32 i;
- while (timeout) {
+ for (i = 0; i < timeout; i++) {
/*
- * SW EEPROM semaphore bit is used for access to all
- * SW_FW_SYNC/GSSR bits (not just EEPROM)
+ * SW NVM semaphore bit is used for access to all
+ * SW_FW_SYNC bits (not just NVM)
*/
if (ixgbe_get_eeprom_semaphore(hw))
return IXGBE_ERR_SWFW_SYNC;
gssr = IXGBE_READ_REG(hw, IXGBE_GSSR);
- if (!(gssr & (fwmask | swmask)))
- break;
-
- /*
- * Firmware currently using resource (fwmask) or other software
- * thread currently using resource (swmask)
- */
- ixgbe_release_eeprom_semaphore(hw);
- usleep_range(5000, 10000);
- timeout--;
- }
-
- if (!timeout) {
- hw_dbg(hw, "Driver can't access resource, SW_FW_SYNC timeout.\n");
- return IXGBE_ERR_SWFW_SYNC;
+ if (!(gssr & (fwmask | swmask))) {
+ gssr |= swmask;
+ IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr);
+ ixgbe_release_eeprom_semaphore(hw);
+ return 0;
+ } else {
+ /* Resource is currently in use by FW or SW */
+ ixgbe_release_eeprom_semaphore(hw);
+ usleep_range(5000, 10000);
+ }
}
- gssr |= swmask;
- IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr);
+ /* If time expired clear the bits holding the lock and retry */
+ if (gssr & (fwmask | swmask))
+ ixgbe_release_swfw_sync(hw, gssr & (fwmask | swmask));
- ixgbe_release_eeprom_semaphore(hw);
- return 0;
+ usleep_range(5000, 10000);
+ return IXGBE_ERR_SWFW_SYNC;
}
/**
@@ -2716,13 +2740,19 @@ out:
static s32 ixgbe_get_san_mac_addr_offset(struct ixgbe_hw *hw,
u16 *san_mac_offset)
{
+ s32 ret_val;
+
/*
* First read the EEPROM pointer to see if the MAC addresses are
* available.
*/
- hw->eeprom.ops.read(hw, IXGBE_SAN_MAC_ADDR_PTR, san_mac_offset);
+ ret_val = hw->eeprom.ops.read(hw, IXGBE_SAN_MAC_ADDR_PTR,
+ san_mac_offset);
+ if (ret_val)
+ hw_err(hw, "eeprom read at offset %d failed\n",
+ IXGBE_SAN_MAC_ADDR_PTR);
- return 0;
+ return ret_val;
}
/**
@@ -2739,23 +2769,16 @@ s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr)
{
u16 san_mac_data, san_mac_offset;
u8 i;
+ s32 ret_val;
/*
* First read the EEPROM pointer to see if the MAC addresses are
* available. If they're not, no point in calling set_lan_id() here.
*/
- ixgbe_get_san_mac_addr_offset(hw, &san_mac_offset);
+ ret_val = ixgbe_get_san_mac_addr_offset(hw, &san_mac_offset);
+ if (ret_val || san_mac_offset == 0 || san_mac_offset == 0xFFFF)
- if ((san_mac_offset == 0) || (san_mac_offset == 0xFFFF)) {
- /*
- * No addresses available in this EEPROM. It's not an
- * error though, so just wipe the local address and return.
- */
- for (i = 0; i < 6; i++)
- san_mac_addr[i] = 0xFF;
-
- goto san_mac_addr_out;
- }
+ goto san_mac_addr_clr;
/* make sure we know which port we need to program */
hw->mac.ops.set_lan_id(hw);
@@ -2763,14 +2786,26 @@ s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr)
(hw->bus.func) ? (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT1_OFFSET) :
(san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT0_OFFSET);
for (i = 0; i < 3; i++) {
- hw->eeprom.ops.read(hw, san_mac_offset, &san_mac_data);
+ ret_val = hw->eeprom.ops.read(hw, san_mac_offset,
+ &san_mac_data);
+ if (ret_val) {
+ hw_err(hw, "eeprom read at offset %d failed\n",
+ san_mac_offset);
+ goto san_mac_addr_clr;
+ }
san_mac_addr[i * 2] = (u8)(san_mac_data);
san_mac_addr[i * 2 + 1] = (u8)(san_mac_data >> 8);
san_mac_offset++;
}
-
-san_mac_addr_out:
return 0;
+
+san_mac_addr_clr:
+ /* No addresses available in this EEPROM. It's not necessarily an
+ * error though, so just wipe the local address and return.
+ */
+ for (i = 0; i < 6; i++)
+ san_mac_addr[i] = 0xFF;
+ return ret_val;
}
/**
@@ -3219,8 +3254,9 @@ s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix,
*wwpn_prefix = 0xFFFF;
/* check if alternative SAN MAC is supported */
- hw->eeprom.ops.read(hw, IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR,
- &alt_san_mac_blk_offset);
+ offset = IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR;
+ if (hw->eeprom.ops.read(hw, offset, &alt_san_mac_blk_offset))
+ goto wwn_prefix_err;
if ((alt_san_mac_blk_offset == 0) ||
(alt_san_mac_blk_offset == 0xFFFF))
@@ -3228,19 +3264,26 @@ s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix,
/* check capability in alternative san mac address block */
offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET;
- hw->eeprom.ops.read(hw, offset, &caps);
+ if (hw->eeprom.ops.read(hw, offset, &caps))
+ goto wwn_prefix_err;
if (!(caps & IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN))
goto wwn_prefix_out;
/* get the corresponding prefix for WWNN/WWPN */
offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET;
- hw->eeprom.ops.read(hw, offset, wwnn_prefix);
+ if (hw->eeprom.ops.read(hw, offset, wwnn_prefix))
+ hw_err(hw, "eeprom read at offset %d failed\n", offset);
offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET;
- hw->eeprom.ops.read(hw, offset, wwpn_prefix);
+ if (hw->eeprom.ops.read(hw, offset, wwpn_prefix))
+ goto wwn_prefix_err;
wwn_prefix_out:
return 0;
+
+wwn_prefix_err:
+ hw_err(hw, "eeprom read at offset %d failed\n", offset);
+ return 0;
}
/**
@@ -3754,7 +3797,11 @@ s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw)
u8 sensor_index;
u8 sensor_location;
- hw->eeprom.ops.read(hw, (ets_offset + 1 + i), &ets_sensor);
+ if (hw->eeprom.ops.read(hw, ets_offset + 1 + i, &ets_sensor)) {
+ hw_err(hw, "eeprom read at offset %d failed\n",
+ ets_offset + 1 + i);
+ continue;
+ }
sensor_index = ((ets_sensor & IXGBE_ETS_DATA_INDEX_MASK) >>
IXGBE_ETS_DATA_INDEX_SHIFT);
sensor_location = ((ets_sensor & IXGBE_ETS_DATA_LOC_MASK) >>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.