diff options
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_main.c')
-rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 84 |
1 files changed, 33 insertions, 51 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 0ade0cd5ef53..5191b3ca9a26 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -153,7 +153,6 @@ MODULE_VERSION(DRV_VERSION); static int ixgbe_read_pci_cfg_word_parent(struct ixgbe_adapter *adapter, u32 reg, u16 *value) { - int pos = 0; struct pci_dev *parent_dev; struct pci_bus *parent_bus; @@ -165,11 +164,10 @@ static int ixgbe_read_pci_cfg_word_parent(struct ixgbe_adapter *adapter, if (!parent_dev) return -1; - pos = pci_find_capability(parent_dev, PCI_CAP_ID_EXP); - if (!pos) + if (!pci_is_pcie(parent_dev)) return -1; - pci_read_config_word(parent_dev, pos + reg, value); + pcie_capability_read_word(parent_dev, reg, value); return 0; } @@ -247,7 +245,7 @@ static void ixgbe_check_minimum_link(struct ixgbe_adapter *adapter, max_gts = 4 * width; break; case PCIE_SPEED_8_0GT: - /* 128b/130b encoding only reduces throughput by 1% */ + /* 128b/130b encoding reduces throughput by less than 2% */ max_gts = 8 * width; break; default: @@ -265,7 +263,7 @@ static void ixgbe_check_minimum_link(struct ixgbe_adapter *adapter, width, (speed == PCIE_SPEED_2_5GT ? "20%" : speed == PCIE_SPEED_5_0GT ? "20%" : - speed == PCIE_SPEED_8_0GT ? "N/a" : + speed == PCIE_SPEED_8_0GT ? "<2%" : "Unknown")); if (max_gts < expected_gts) { @@ -1585,7 +1583,7 @@ static void ixgbe_rx_skb(struct ixgbe_q_vector *q_vector, { struct ixgbe_adapter *adapter = q_vector->adapter; - if (ixgbe_qv_ll_polling(q_vector)) + if (ixgbe_qv_busy_polling(q_vector)) netif_receive_skb(skb); else if (!(adapter->flags & IXGBE_FLAG_IN_NETPOLL)) napi_gro_receive(&q_vector->napi, skb); @@ -2097,7 +2095,7 @@ static int ixgbe_low_latency_recv(struct napi_struct *napi) ixgbe_for_each_ring(ring, q_vector->rx) { found = ixgbe_clean_rx_irq(q_vector, ring, 4); -#ifdef LL_EXTENDED_STATS +#ifdef BP_EXTENDED_STATS if (found) ring->stats.cleaned += found; else @@ -3825,14 +3823,6 @@ void ixgbe_set_rx_mode(struct net_device *netdev) if (netdev->flags & IFF_ALLMULTI) { fctrl |= IXGBE_FCTRL_MPE; vmolr |= IXGBE_VMOLR_MPE; - } else { - /* - * Write addresses to the MTA, if the attempt fails - * then we should just turn on promiscuous mode so - * that we can at least receive multicast traffic - */ - hw->mac.ops.update_mc_addr_list(hw, netdev); - vmolr |= IXGBE_VMOLR_ROMPE; } ixgbe_vlan_filter_enable(adapter); hw->addr_ctrl.user_set_promisc = false; @@ -3849,6 +3839,13 @@ void ixgbe_set_rx_mode(struct net_device *netdev) vmolr |= IXGBE_VMOLR_ROPE; } + /* Write addresses to the MTA, if the attempt fails + * then we should just turn on promiscuous mode so + * that we can at least receive multicast traffic + */ + hw->mac.ops.update_mc_addr_list(hw, netdev); + vmolr |= IXGBE_VMOLR_ROMPE; + if (adapter->num_vfs) ixgbe_restore_vf_multicasts(adapter); @@ -3893,15 +3890,13 @@ static void ixgbe_napi_disable_all(struct ixgbe_adapter *adapter) { int q_idx; - local_bh_disable(); /* for ixgbe_qv_lock_napi() */ for (q_idx = 0; q_idx < adapter->num_q_vectors; q_idx++) { napi_disable(&adapter->q_vector[q_idx]->napi); - while (!ixgbe_qv_lock_napi(adapter->q_vector[q_idx])) { + while (!ixgbe_qv_disable(adapter->q_vector[q_idx])) { pr_info("QV %d locked\n", q_idx); - mdelay(1); + usleep_range(1000, 20000); } } - local_bh_enable(); } #ifdef CONFIG_IXGBE_DCB @@ -7362,19 +7357,16 @@ static const struct net_device_ops ixgbe_netdev_ops = { **/ static inline int ixgbe_enumerate_functions(struct ixgbe_adapter *adapter) { - struct ixgbe_hw *hw = &adapter->hw; struct list_head *entry; int physfns = 0; - /* Some cards can not use the generic count PCIe functions method, and - * so must be hardcoded to the correct value. + /* Some cards can not use the generic count PCIe functions method, + * because they are behind a parent switch, so we hardcode these with + * the correct number of functions. */ - switch (hw->device_id) { - case IXGBE_DEV_ID_82599_SFP_SF_QP: - case IXGBE_DEV_ID_82599_QSFP_SF_QP: + if (ixgbe_pcie_from_parent(&adapter->hw)) { physfns = 4; - break; - default: + } else { list_for_each(entry, &adapter->pdev->bus_list) { struct pci_dev *pdev = list_entry(entry, struct pci_dev, bus_list); @@ -7759,29 +7751,6 @@ skip_sriov: if (ixgbe_pcie_from_parent(hw)) ixgbe_get_parent_bus_info(adapter); - /* print bus type/speed/width info */ - e_dev_info("(PCI Express:%s:%s) %pM\n", - (hw->bus.speed == ixgbe_bus_speed_8000 ? "8.0GT/s" : - hw->bus.speed == ixgbe_bus_speed_5000 ? "5.0GT/s" : - hw->bus.speed == ixgbe_bus_speed_2500 ? "2.5GT/s" : - "Unknown"), - (hw->bus.width == ixgbe_bus_width_pcie_x8 ? "Width x8" : - hw->bus.width == ixgbe_bus_width_pcie_x4 ? "Width x4" : - hw->bus.width == ixgbe_bus_width_pcie_x1 ? "Width x1" : - "Unknown"), - netdev->dev_addr); - - err = ixgbe_read_pba_string_generic(hw, part_str, IXGBE_PBANUM_LENGTH); - if (err) - strncpy(part_str, "Unknown", IXGBE_PBANUM_LENGTH); - if (ixgbe_is_sfp(hw) && hw->phy.sfp_type != ixgbe_sfp_type_not_present) - e_dev_info("MAC: %d, PHY: %d, SFP+: %d, PBA No: %s\n", - hw->mac.type, hw->phy.type, hw->phy.sfp_type, - part_str); - else - e_dev_info("MAC: %d, PHY: %d, PBA No: %s\n", - hw->mac.type, hw->phy.type, part_str); - /* calculate the expected PCIe bandwidth required for optimal * performance. Note that some older parts will never have enough * bandwidth due to being older generation PCIe parts. We clamp these @@ -7797,6 +7766,19 @@ skip_sriov: } ixgbe_check_minimum_link(adapter, expected_gts); + err = ixgbe_read_pba_string_generic(hw, part_str, IXGBE_PBANUM_LENGTH); + if (err) + strncpy(part_str, "Unknown", IXGBE_PBANUM_LENGTH); + if (ixgbe_is_sfp(hw) && hw->phy.sfp_type != ixgbe_sfp_type_not_present) + e_dev_info("MAC: %d, PHY: %d, SFP+: %d, PBA No: %s\n", + hw->mac.type, hw->phy.type, hw->phy.sfp_type, + part_str); + else + e_dev_info("MAC: %d, PHY: %d, PBA No: %s\n", + hw->mac.type, hw->phy.type, part_str); + + e_dev_info("%pM\n", netdev->dev_addr); + /* reset the hardware with the new settings */ err = hw->mac.ops.start_hw(hw); if (err == IXGBE_ERR_EEPROM_VERSION) { |