diff options
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c')
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c | 102 |
1 files changed, 64 insertions, 38 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c index 72d84a065e34..19fbb2f28ea4 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c @@ -1555,9 +1555,14 @@ static s32 ixgbe_restart_an_internal_phy_x550em(struct ixgbe_hw *hw) **/ static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed) { + struct ixgbe_mac_info *mac = &hw->mac; s32 status; u32 reg_val; + /* iXFI is only supported with X552 */ + if (mac->type != ixgbe_mac_X550EM_x) + return IXGBE_ERR_LINK_SETUP; + /* Disable AN and force speed to 10G Serial. */ status = ixgbe_read_iosf_sb_reg_x550(hw, IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), @@ -1874,8 +1879,10 @@ static s32 ixgbe_setup_mac_link_t_X550em(struct ixgbe_hw *hw, else force_speed = IXGBE_LINK_SPEED_1GB_FULL; - /* If internal link mode is XFI, then setup XFI internal link. */ - if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) { + /* If X552 and internal link mode is XFI, then setup XFI internal link. + */ + if (hw->mac.type == ixgbe_mac_X550EM_x && + !(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) { status = ixgbe_setup_ixfi_x550em(hw, &force_speed); if (status) @@ -2404,17 +2411,30 @@ static s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw) status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc); /* Enable link status change alarm */ - status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK, - MDIO_MMD_AN, ®); - if (status) - return status; - reg |= IXGBE_MDIO_PMA_TX_VEN_LASI_INT_EN; + /* Enable the LASI interrupts on X552 devices to receive notifications + * of the link configurations of the external PHY and correspondingly + * support the configuration of the internal iXFI link, since iXFI does + * not support auto-negotiation. This is not required for X553 devices + * having KR support, which performs auto-negotiations and which is used + * as the internal link to the external PHY. Hence adding a check here + * to avoid enabling LASI interrupts for X553 devices. + */ + if (hw->mac.type != ixgbe_mac_x550em_a) { + status = hw->phy.ops.read_reg(hw, + IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK, + MDIO_MMD_AN, ®); + if (status) + return status; - status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK, - MDIO_MMD_AN, reg); - if (status) - return status; + reg |= IXGBE_MDIO_PMA_TX_VEN_LASI_INT_EN; + + status = hw->phy.ops.write_reg(hw, + IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK, + MDIO_MMD_AN, reg); + if (status) + return status; + } /* Enable high temperature failure and global fault alarms */ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK, @@ -2615,7 +2635,8 @@ static s32 ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw) if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper) return IXGBE_ERR_CONFIG; - if (hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE) { + if (!(hw->mac.type == ixgbe_mac_X550EM_x && + !(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE))) { speed = IXGBE_LINK_SPEED_10GB_FULL | IXGBE_LINK_SPEED_1GB_FULL; return ixgbe_setup_kr_speed_x550em(hw, speed); @@ -2822,7 +2843,7 @@ static s32 ixgbe_setup_fc_x550em(struct ixgbe_hw *hw) { bool pause, asm_dir; u32 reg_val; - s32 rc; + s32 rc = 0; /* Validate the requested mode */ if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) { @@ -2865,32 +2886,37 @@ static s32 ixgbe_setup_fc_x550em(struct ixgbe_hw *hw) return IXGBE_ERR_CONFIG; } - if (hw->device_id != IXGBE_DEV_ID_X550EM_X_KR && - hw->device_id != IXGBE_DEV_ID_X550EM_A_KR && - hw->device_id != IXGBE_DEV_ID_X550EM_A_KR_L) - return 0; - - rc = hw->mac.ops.read_iosf_sb_reg(hw, - IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, - ®_val); - if (rc) - return rc; - - reg_val &= ~(IXGBE_KRM_AN_CNTL_1_SYM_PAUSE | - IXGBE_KRM_AN_CNTL_1_ASM_PAUSE); - if (pause) - reg_val |= IXGBE_KRM_AN_CNTL_1_SYM_PAUSE; - if (asm_dir) - reg_val |= IXGBE_KRM_AN_CNTL_1_ASM_PAUSE; - rc = hw->mac.ops.write_iosf_sb_reg(hw, - IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, - reg_val); - - /* This device does not fully support AN. */ - hw->fc.disable_fc_autoneg = true; + switch (hw->device_id) { + case IXGBE_DEV_ID_X550EM_X_KR: + case IXGBE_DEV_ID_X550EM_A_KR: + case IXGBE_DEV_ID_X550EM_A_KR_L: + rc = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, + ®_val); + if (rc) + return rc; + reg_val &= ~(IXGBE_KRM_AN_CNTL_1_SYM_PAUSE | + IXGBE_KRM_AN_CNTL_1_ASM_PAUSE); + if (pause) + reg_val |= IXGBE_KRM_AN_CNTL_1_SYM_PAUSE; + if (asm_dir) + reg_val |= IXGBE_KRM_AN_CNTL_1_ASM_PAUSE; + rc = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, + reg_val); + + /* This device does not fully support AN. */ + hw->fc.disable_fc_autoneg = true; + break; + case IXGBE_DEV_ID_X550EM_X_XFI: + hw->fc.disable_fc_autoneg = true; + break; + default: + break; + } return rc; } |