diff options
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c')
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c | 182 |
1 files changed, 179 insertions, 3 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c index 7581da13e92a..9fe9445cd73b 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c @@ -26,6 +26,20 @@ #include "ixgbe_common.h" #include "ixgbe_phy.h" +static s32 ixgbe_get_invariants_X550_x(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + struct ixgbe_phy_info *phy = &hw->phy; + + /* Start with X540 invariants, since so simular */ + ixgbe_get_invariants_X540(hw); + + if (mac->ops.get_media_type(hw) != ixgbe_media_type_copper) + phy->ops.set_phy_power = NULL; + + return 0; +} + /** ixgbe_setup_mux_ctl - Setup ESDP register for I2C mux control * @hw: pointer to hardware structure **/ @@ -597,6 +611,24 @@ static s32 ixgbe_update_flash_X550(struct ixgbe_hw *hw) return status; } +/** + * ixgbe_get_bus_info_X550em - Set PCI bus info + * @hw: pointer to hardware structure + * + * Sets bus link width and speed to unknown because X550em is + * not a PCI device. + **/ +static s32 ixgbe_get_bus_info_X550em(struct ixgbe_hw *hw) +{ + hw->bus.type = ixgbe_bus_type_internal; + hw->bus.width = ixgbe_bus_width_unknown; + hw->bus.speed = ixgbe_bus_speed_unknown; + + hw->mac.ops.set_lan_id(hw); + + return 0; +} + /** ixgbe_disable_rx_x550 - Disable RX unit * * Enables the Rx DMA unit for x550 @@ -1444,6 +1476,144 @@ static s32 ixgbe_reset_phy_t_X550em(struct ixgbe_hw *hw) return ixgbe_enable_lasi_ext_t_x550em(hw); } +/** ixgbe_get_lcd_x550em - Determine lowest common denominator + * @hw: pointer to hardware structure + * @lcd_speed: pointer to lowest common link speed + * + * Determine lowest common link speed with link partner. + **/ +static s32 ixgbe_get_lcd_t_x550em(struct ixgbe_hw *hw, + ixgbe_link_speed *lcd_speed) +{ + u16 an_lp_status; + s32 status; + u16 word = hw->eeprom.ctrl_word_3; + + *lcd_speed = IXGBE_LINK_SPEED_UNKNOWN; + + status = hw->phy.ops.read_reg(hw, IXGBE_AUTO_NEG_LP_STATUS, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &an_lp_status); + if (status) + return status; + + /* If link partner advertised 1G, return 1G */ + if (an_lp_status & IXGBE_AUTO_NEG_LP_1000BASE_CAP) { + *lcd_speed = IXGBE_LINK_SPEED_1GB_FULL; + return status; + } + + /* If 10G disabled for LPLU via NVM D10GMP, then return no valid LCD */ + if ((hw->bus.lan_id && (word & NVM_INIT_CTRL_3_D10GMP_PORT1)) || + (word & NVM_INIT_CTRL_3_D10GMP_PORT0)) + return status; + + /* Link partner not capable of lower speeds, return 10G */ + *lcd_speed = IXGBE_LINK_SPEED_10GB_FULL; + return status; +} + +/** ixgbe_enter_lplu_x550em - Transition to low power states + * @hw: pointer to hardware structure + * + * Configures Low Power Link Up on transition to low power states + * (from D0 to non-D0). Link is required to enter LPLU so avoid resetting + * the X557 PHY immediately prior to entering LPLU. + **/ +static s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw) +{ + u16 an_10g_cntl_reg, autoneg_reg, speed; + s32 status; + ixgbe_link_speed lcd_speed; + u32 save_autoneg; + bool link_up; + + /* SW LPLU not required on later HW revisions. */ + if (IXGBE_FUSES0_REV1 & IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0))) + return 0; + + /* If blocked by MNG FW, then don't restart AN */ + if (ixgbe_check_reset_blocked(hw)) + return 0; + + status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up); + if (status) + return status; + + status = hw->eeprom.ops.read(hw, NVM_INIT_CTRL_3, + &hw->eeprom.ctrl_word_3); + if (status) + return status; + + /* If link is down, LPLU disabled in NVM, WoL disabled, or + * manageability disabled, then force link down by entering + * low power mode. + */ + if (!link_up || !(hw->eeprom.ctrl_word_3 & NVM_INIT_CTRL_3_LPLU) || + !(hw->wol_enabled || ixgbe_mng_present(hw))) + return ixgbe_set_copper_phy_power(hw, false); + + /* Determine LCD */ + status = ixgbe_get_lcd_t_x550em(hw, &lcd_speed); + if (status) + return status; + + /* If no valid LCD link speed, then force link down and exit. */ + if (lcd_speed == IXGBE_LINK_SPEED_UNKNOWN) + return ixgbe_set_copper_phy_power(hw, false); + + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &speed); + if (status) + return status; + + /* If no link now, speed is invalid so take link down */ + status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up); + if (status) + return ixgbe_set_copper_phy_power(hw, false); + + /* clear everything but the speed bits */ + speed &= IXGBE_MDIO_AUTO_NEG_VEN_STAT_SPEED_MASK; + + /* If current speed is already LCD, then exit. */ + if (((speed == IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB) && + (lcd_speed == IXGBE_LINK_SPEED_1GB_FULL)) || + ((speed == IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB) && + (lcd_speed == IXGBE_LINK_SPEED_10GB_FULL))) + return status; + + /* Clear AN completed indication */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_reg); + if (status) + return status; + + status = hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &an_10g_cntl_reg); + if (status) + return status; + + status = hw->phy.ops.read_reg(hw, + IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_reg); + if (status) + return status; + + save_autoneg = hw->phy.autoneg_advertised; + + /* Setup link at least common link speed */ + status = hw->mac.ops.setup_link(hw, lcd_speed, false); + + /* restore autoneg from before setting lplu speed */ + hw->phy.autoneg_advertised = save_autoneg; + + return status; +} + /** ixgbe_init_phy_ops_X550em - PHY/SFP specific init * @hw: pointer to hardware structure * @@ -1514,6 +1684,11 @@ static s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw) ret_val = ixgbe_setup_kr_speed_x550em(hw, speed); } + /* setup SW LPLU only for first revision */ + if (!(IXGBE_FUSES0_REV1 & IXGBE_READ_REG(hw, + IXGBE_FUSES0_GROUP(0)))) + phy->ops.enter_lplu = ixgbe_enter_lplu_t_x550em; + phy->ops.handle_lasi = ixgbe_handle_lasi_ext_t_x550em; phy->ops.reset = ixgbe_reset_phy_t_X550em; break; @@ -1760,7 +1935,6 @@ static void ixgbe_set_source_address_pruning_X550(struct ixgbe_hw *hw, .get_mac_addr = &ixgbe_get_mac_addr_generic, \ .get_device_caps = &ixgbe_get_device_caps_generic, \ .stop_adapter = &ixgbe_stop_adapter_generic, \ - .get_bus_info = &ixgbe_get_bus_info_generic, \ .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie, \ .read_analog_reg8 = NULL, \ .write_analog_reg8 = NULL, \ @@ -1809,6 +1983,7 @@ static struct ixgbe_mac_operations mac_ops_X550 = { .get_wwn_prefix = &ixgbe_get_wwn_prefix_generic, .setup_link = &ixgbe_setup_mac_link_X540, .get_link_capabilities = &ixgbe_get_copper_link_capabilities_generic, + .get_bus_info = &ixgbe_get_bus_info_generic, .setup_sfp = NULL, }; @@ -1820,6 +1995,7 @@ static struct ixgbe_mac_operations mac_ops_X550EM_x = { .get_wwn_prefix = NULL, .setup_link = NULL, /* defined later */ .get_link_capabilities = &ixgbe_get_link_capabilities_X550em, + .get_bus_info = &ixgbe_get_bus_info_X550em, .setup_sfp = ixgbe_setup_sfp_modules_X550em, }; @@ -1855,7 +2031,7 @@ static struct ixgbe_eeprom_operations eeprom_ops_X550EM_x = { .read_reg = &ixgbe_read_phy_reg_generic, \ .write_reg = &ixgbe_write_phy_reg_generic, \ .setup_link = &ixgbe_setup_phy_link_generic, \ - .set_phy_power = &ixgbe_set_copper_phy_power, \ + .set_phy_power = NULL, \ .check_overtemp = &ixgbe_tn_check_overtemp, \ .get_firmware_version = &ixgbe_get_phy_firmware_version_generic, @@ -1893,7 +2069,7 @@ struct ixgbe_info ixgbe_X550_info = { struct ixgbe_info ixgbe_X550EM_x_info = { .mac = ixgbe_mac_X550EM_x, - .get_invariants = &ixgbe_get_invariants_X540, + .get_invariants = &ixgbe_get_invariants_X550_x, .mac_ops = &mac_ops_X550EM_x, .eeprom_ops = &eeprom_ops_X550EM_x, .phy_ops = &phy_ops_X550EM_x, |