7 files changed, 55 insertions, 53 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 77ac41feb0fe..bb7fde45c057 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -3132,7 +3132,7 @@ s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
 }
 
 /**
- *  ixgbe_get_wwn_prefix_generic Get alternative WWNN/WWPN prefix from
+ *  ixgbe_get_wwn_prefix_generic - Get alternative WWNN/WWPN prefix from
  *  the EEPROM
  *  @hw: pointer to hardware structure
  *  @wwnn_prefix: the alternative WWNN prefix
@@ -3325,6 +3325,7 @@ void ixgbe_set_rxpba_generic(struct ixgbe_hw *hw,
  *  ixgbe_calculate_checksum - Calculate checksum for buffer
  *  @buffer: pointer to EEPROM
  *  @length: size of EEPROM to calculate a checksum for
+ *
  *  Calculates the checksum for some buffer on a specified length.  The
  *  checksum calculated is returned.
  **/
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
index bc07933d67da..0ee4dbf4a752 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
@@ -38,7 +38,7 @@
 
 /**
  * ixgbe_fcoe_clear_ddp - clear the given ddp context
- * @ddp - ptr to the ixgbe_fcoe_ddp
+ * @ddp: ptr to the ixgbe_fcoe_ddp
  *
  * Returns : none
  *
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
index c377706e81a8..f36c3c38dbcb 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
@@ -252,7 +252,7 @@ static void ixgbe_cache_ring_register(struct ixgbe_adapter *adapter)
 }
 
 /**
- * ixgbe_set_sriov_queues: Allocate queues for IOV use
+ * ixgbe_set_sriov_queues - Allocate queues for IOV use
  * @adapter: board private structure to initialize
  *
  * IOV doesn't actually use anything, so just NAK the
@@ -265,7 +265,7 @@ static inline bool ixgbe_set_sriov_queues(struct ixgbe_adapter *adapter)
 }
 
 /**
- * ixgbe_set_rss_queues: Allocate queues for RSS
+ * ixgbe_set_rss_queues - Allocate queues for RSS
  * @adapter: board private structure to initialize
  *
  * This is our "base" multiqueue mode.  RSS (Receive Side Scaling) will try
@@ -288,7 +288,7 @@ static inline bool ixgbe_set_rss_queues(struct ixgbe_adapter *adapter)
 }
 
 /**
- * ixgbe_set_fdir_queues: Allocate queues for Flow Director
+ * ixgbe_set_fdir_queues - Allocate queues for Flow Director
  * @adapter: board private structure to initialize
  *
  * Flow Director is an advanced Rx filter, attempting to get Rx flows back
@@ -323,7 +323,7 @@ static inline bool ixgbe_set_fdir_queues(struct ixgbe_adapter *adapter)
 
 #ifdef IXGBE_FCOE
 /**
- * ixgbe_set_fcoe_queues: Allocate queues for Fiber Channel over Ethernet (FCoE)
+ * ixgbe_set_fcoe_queues - Allocate queues for Fiber Channel over Ethernet (FCoE)
  * @adapter: board private structure to initialize
  *
  * FCoE RX FCRETA can use up to 8 rx queues for up to 8 different exchanges.
@@ -410,7 +410,7 @@ static inline bool ixgbe_set_dcb_queues(struct ixgbe_adapter *adapter)
 #endif
 
 /**
- * ixgbe_set_num_queues: Allocate queues for device, feature dependent
+ * ixgbe_set_num_queues - Allocate queues for device, feature dependent
  * @adapter: board private structure to initialize
  *
  * This is the top level queue allocation routine.  The order here is very
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 5afbb37a738c..9313f5c84fad 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -516,7 +516,7 @@ static void ixgbe_get_hw_control(struct ixgbe_adapter *adapter)
 			ctrl_ext | IXGBE_CTRL_EXT_DRV_LOAD);
 }
 
-/*
+/**
  * ixgbe_set_ivar - set the IVAR registers, mapping interrupt causes to vectors
  * @adapter: pointer to adapter struct
  * @direction: 0 for Rx, 1 for Tx, -1 for other causes
@@ -3591,7 +3591,7 @@ static void ixgbe_napi_disable_all(struct ixgbe_adapter *adapter)
 }
 
 #ifdef CONFIG_IXGBE_DCB
-/*
+/**
  * ixgbe_configure_dcb - Configure DCB hardware
  * @adapter: ixgbe adapter struct
  *
@@ -3658,11 +3658,11 @@ static void ixgbe_configure_dcb(struct ixgbe_adapter *adapter)
 /* Additional bittime to account for IXGBE framing */
 #define IXGBE_ETH_FRAMING 20
 
-/*
+/**
  * ixgbe_hpbthresh - calculate high water mark for flow control
  *
  * @adapter: board private structure to calculate for
- * @pb - packet buffer to calculate
+ * @pb: packet buffer to calculate
  */
 static int ixgbe_hpbthresh(struct ixgbe_adapter *adapter, int pb)
 {
@@ -3722,11 +3722,11 @@ static int ixgbe_hpbthresh(struct ixgbe_adapter *adapter, int pb)
 	return marker;
 }
 
-/*
+/**
  * ixgbe_lpbthresh - calculate low water mark for for flow control
  *
  * @adapter: board private structure to calculate for
- * @pb - packet buffer to calculate
+ * @pb: packet buffer to calculate
  */
 static int ixgbe_lpbthresh(struct ixgbe_adapter *adapter)
 {
@@ -5243,7 +5243,7 @@ void ixgbe_update_stats(struct ixgbe_adapter *adapter)
 
 /**
  * ixgbe_fdir_reinit_subtask - worker thread to reinit FDIR filter table
- * @adapter - pointer to the device adapter structure
+ * @adapter: pointer to the device adapter structure
  **/
 static void ixgbe_fdir_reinit_subtask(struct ixgbe_adapter *adapter)
 {
@@ -5279,7 +5279,7 @@ static void ixgbe_fdir_reinit_subtask(struct ixgbe_adapter *adapter)
 
 /**
  * ixgbe_check_hang_subtask - check for hung queues and dropped interrupts
- * @adapter - pointer to the device adapter structure
+ * @adapter: pointer to the device adapter structure
  *
  * This function serves two purposes.  First it strobes the interrupt lines
  * in order to make certain interrupts are occurring.  Secondly it sets the
@@ -5327,8 +5327,8 @@ static void ixgbe_check_hang_subtask(struct ixgbe_adapter *adapter)
 
 /**
  * ixgbe_watchdog_update_link - update the link status
- * @adapter - pointer to the device adapter structure
- * @link_speed - pointer to a u32 to store the link_speed
+ * @adapter: pointer to the device adapter structure
+ * @link_speed: pointer to a u32 to store the link_speed
  **/
 static void ixgbe_watchdog_update_link(struct ixgbe_adapter *adapter)
 {
@@ -5371,7 +5371,7 @@ static void ixgbe_watchdog_update_link(struct ixgbe_adapter *adapter)
 /**
  * ixgbe_watchdog_link_is_up - update netif_carrier status and
  *                             print link up message
- * @adapter - pointer to the device adapter structure
+ * @adapter: pointer to the device adapter structure
  **/
 static void ixgbe_watchdog_link_is_up(struct ixgbe_adapter *adapter)
 {
@@ -5431,7 +5431,7 @@ static void ixgbe_watchdog_link_is_up(struct ixgbe_adapter *adapter)
 /**
  * ixgbe_watchdog_link_is_down - update netif_carrier status and
  *                               print link down message
- * @adapter - pointer to the adapter structure
+ * @adapter: pointer to the adapter structure
  **/
 static void ixgbe_watchdog_link_is_down(struct ixgbe_adapter *adapter)
 {
@@ -5459,7 +5459,7 @@ static void ixgbe_watchdog_link_is_down(struct ixgbe_adapter *adapter)
 
 /**
  * ixgbe_watchdog_flush_tx - flush queues on link down
- * @adapter - pointer to the device adapter structure
+ * @adapter: pointer to the device adapter structure
  **/
 static void ixgbe_watchdog_flush_tx(struct ixgbe_adapter *adapter)
 {
@@ -5508,7 +5508,7 @@ static void ixgbe_spoof_check(struct ixgbe_adapter *adapter)
 
 /**
  * ixgbe_watchdog_subtask - check and bring link up
- * @adapter - pointer to the device adapter structure
+ * @adapter: pointer to the device adapter structure
  **/
 static void ixgbe_watchdog_subtask(struct ixgbe_adapter *adapter)
 {
@@ -5532,7 +5532,7 @@ static void ixgbe_watchdog_subtask(struct ixgbe_adapter *adapter)
 
 /**
  * ixgbe_sfp_detection_subtask - poll for SFP+ cable
- * @adapter - the ixgbe adapter structure
+ * @adapter: the ixgbe adapter structure
  **/
 static void ixgbe_sfp_detection_subtask(struct ixgbe_adapter *adapter)
 {
@@ -5599,7 +5599,7 @@ sfp_out:
 
 /**
  * ixgbe_sfp_link_config_subtask - set up link SFP after module install
- * @adapter - the ixgbe adapter structure
+ * @adapter: the ixgbe adapter structure
  **/
 static void ixgbe_sfp_link_config_subtask(struct ixgbe_adapter *adapter)
 {
@@ -6586,8 +6586,9 @@ static struct rtnl_link_stats64 *ixgbe_get_stats64(struct net_device *netdev,
 }
 
 #ifdef CONFIG_IXGBE_DCB
-/* ixgbe_validate_rtr - verify 802.1Qp to Rx packet buffer mapping is valid.
- * #adapter: pointer to ixgbe_adapter
+/**
+ * ixgbe_validate_rtr - verify 802.1Qp to Rx packet buffer mapping is valid.
+ * @adapter: pointer to ixgbe_adapter
  * @tc: number of traffic classes currently enabled
  *
  * Configure a valid 802.1Qp to Rx packet buffer mapping ie confirm
@@ -6622,8 +6623,8 @@ static void ixgbe_validate_rtr(struct ixgbe_adapter *adapter, u8 tc)
 	return;
 }
 
-/* ixgbe_setup_tc - routine to configure net_device for multiple traffic
- * classes.
+/**
+ * ixgbe_setup_tc - configure net_device for multiple traffic classes
  *
  * @netdev: net device to configure
  * @tc: number of traffic classes to enable
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
index daddd844691f..3456d5617143 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
@@ -107,7 +107,7 @@ static struct sock_filter ptp_filter[] = {
 
 /**
  * ixgbe_ptp_read - read raw cycle counter (to be used by time counter)
- * @cc - the cyclecounter structure
+ * @cc: the cyclecounter structure
  *
  * this function reads the cyclecounter registers and is called by the
  * cyclecounter structure used to construct a ns counter from the
@@ -128,8 +128,8 @@ static cycle_t ixgbe_ptp_read(const struct cyclecounter *cc)
 
 /**
  * ixgbe_ptp_adjfreq
- * @ptp - the ptp clock structure
- * @ppb - parts per billion adjustment from base
+ * @ptp: the ptp clock structure
+ * @ppb: parts per billion adjustment from base
  *
  * adjust the frequency of the ptp cycle counter by the
  * indicated ppb from the base frequency.
@@ -175,8 +175,8 @@ static int ixgbe_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb)
 
 /**
  * ixgbe_ptp_adjtime
- * @ptp - the ptp clock structure
- * @delta - offset to adjust the cycle counter by
+ * @ptp: the ptp clock structure
+ * @delta: offset to adjust the cycle counter by
  *
  * adjust the timer by resetting the timecounter structure.
  */
@@ -203,8 +203,8 @@ static int ixgbe_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
 
 /**
  * ixgbe_ptp_gettime
- * @ptp - the ptp clock structure
- * @ts - timespec structure to hold the current time value
+ * @ptp: the ptp clock structure
+ * @ts: timespec structure to hold the current time value
  *
  * read the timecounter and return the correct value on ns,
  * after converting it into a struct timespec.
@@ -229,8 +229,8 @@ static int ixgbe_ptp_gettime(struct ptp_clock_info *ptp, struct timespec *ts)
 
 /**
  * ixgbe_ptp_settime
- * @ptp - the ptp clock structure
- * @ts - the timespec containing the new time for the cycle counter
+ * @ptp: the ptp clock structure
+ * @ts: the timespec containing the new time for the cycle counter
  *
  * reset the timecounter to use a new base value instead of the kernel
  * wall timer value.
@@ -256,9 +256,9 @@ static int ixgbe_ptp_settime(struct ptp_clock_info *ptp,
 
 /**
  * ixgbe_ptp_enable
- * @ptp - the ptp clock structure
- * @rq - the requested feature to change
- * @on - whether to enable or disable the feature
+ * @ptp: the ptp clock structure
+ * @rq: the requested feature to change
+ * @on: whether to enable or disable the feature
  *
  * enable (or disable) ancillary features of the phc subsystem.
  * our driver only supports the PPS feature on the X540
@@ -294,8 +294,8 @@ static int ixgbe_ptp_enable(struct ptp_clock_info *ptp,
 
 /**
  * ixgbe_ptp_check_pps_event
- * @adapter - the private adapter structure
- * @eicr - the interrupt cause register value
+ * @adapter: the private adapter structure
+ * @eicr: the interrupt cause register value
  *
  * This function is called by the interrupt routine when checking for
  * interrupts. It will check and handle a pps event.
@@ -325,8 +325,8 @@ void ixgbe_ptp_check_pps_event(struct ixgbe_adapter *adapter, u32 eicr)
 
 /**
  * ixgbe_ptp_enable_sdp
- * @hw - the hardware private structure
- * @shift - the clock shift for calculating nanoseconds
+ * @hw: the hardware private structure
+ * @shift: the clock shift for calculating nanoseconds
  *
  * this function enables the clock out feature on the sdp0 for the
  * X540 device. It will create a 1second periodic output that can be
@@ -399,7 +399,7 @@ static void ixgbe_ptp_enable_sdp(struct ixgbe_hw *hw, int shift)
 
 /**
  * ixgbe_ptp_disable_sdp
- * @hw - the private hardware structure
+ * @hw: the private hardware structure
  *
  * this function disables the auxiliary SDP clock out feature
  */
@@ -769,7 +769,7 @@ int ixgbe_ptp_hwtstamp_ioctl(struct ixgbe_adapter *adapter,
 
 /**
  * ixgbe_ptp_start_cyclecounter - create the cycle counter from hw
- * @adapter - pointer to the adapter structure
+ * @adapter: pointer to the adapter structure
  *
  * this function initializes the timecounter and cyclecounter
  * structures for use in generated a ns counter from the arbitrary
@@ -905,7 +905,7 @@ void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter)
 
 /**
  * ixgbe_ptp_init
- * @adapter - the ixgbe private adapter structure
+ * @adapter: the ixgbe private adapter structure
  *
  * This function performs the required steps for enabling ptp
  * support. If ptp support has already been loaded it simply calls the
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c
index 2334fce47018..16ddf14e8ba4 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c
@@ -95,11 +95,11 @@ static ssize_t ixgbe_hwmon_show_maxopthresh(struct device *dev,
 	return sprintf(buf, "%u\n", value);
 }
 
-/*
+/**
  * ixgbe_add_hwmon_attr - Create hwmon attr table for a hwmon sysfs file.
- * @ adapter: pointer to the adapter structure
- * @ offset: offset in the eeprom sensor data table
- * @ type: type of sensor data to display
+ * @adapter: pointer to the adapter structure
+ * @offset: offset in the eeprom sensor data table
+ * @type: type of sensor data to display
  *
  * For each file we want in hwmon's sysfs interface we need a device_attribute
  * This is included in our hwmon_attr struct that contains the references to
diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index f69ec4288b10..0368160286f9 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -115,7 +115,7 @@ static inline void ixgbevf_release_rx_desc(struct ixgbe_hw *hw,
 	IXGBE_WRITE_REG(hw, IXGBE_VFRDT(rx_ring->reg_idx), val);
 }
 
-/*
+/**
  * ixgbevf_set_ivar - set IVAR registers - maps interrupt causes to vectors
  * @adapter: pointer to adapter struct
  * @direction: 0 for Rx, 1 for Tx, -1 for other causes
@@ -1942,8 +1942,8 @@ static void ixgbevf_acquire_msix_vectors(struct ixgbevf_adapter *adapter,
 	}
 }
 
-/*
- * ixgbevf_set_num_queues: Allocate queues for device, feature dependent
+/**
+ * ixgbevf_set_num_queues - Allocate queues for device, feature dependent
  * @adapter: board private structure to initialize
  *
  * This is the top level queue allocation routine.  The order here is very