diff options
Diffstat (limited to 'drivers/net/ethernet/intel')
31 files changed, 1630 insertions, 672 deletions
diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c index 5115ae76a5d1..ada6e210279f 100644 --- a/drivers/net/ethernet/intel/e100.c +++ b/drivers/net/ethernet/intel/e100.c @@ -1175,15 +1175,12 @@ static int e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb) config->rx_discard_short_frames = 0x0; /* 1=discard, 0=save */ } - netif_printk(nic, hw, KERN_DEBUG, nic->netdev, - "[00-07]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", - c[0], c[1], c[2], c[3], c[4], c[5], c[6], c[7]); - netif_printk(nic, hw, KERN_DEBUG, nic->netdev, - "[08-15]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", - c[8], c[9], c[10], c[11], c[12], c[13], c[14], c[15]); - netif_printk(nic, hw, KERN_DEBUG, nic->netdev, - "[16-23]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", - c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]); + netif_printk(nic, hw, KERN_DEBUG, nic->netdev, "[00-07]=%8ph\n", + c + 0); + netif_printk(nic, hw, KERN_DEBUG, nic->netdev, "[08-15]=%8ph\n", + c + 8); + netif_printk(nic, hw, KERN_DEBUG, nic->netdev, "[16-23]=%8ph\n", + c + 16); return 0; } diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c index 4c303e2a7cb3..104fcec86af3 100644 --- a/drivers/net/ethernet/intel/e1000e/82571.c +++ b/drivers/net/ethernet/intel/e1000e/82571.c @@ -2057,6 +2057,7 @@ const struct e1000_info e1000_82583_info = { | FLAG_HAS_JUMBO_FRAMES | FLAG_HAS_CTRLEXT_ON_LOAD, .flags2 = FLAG2_DISABLE_ASPM_L0S + | FLAG2_DISABLE_ASPM_L1 | FLAG2_NO_DISABLE_RX, .pba = 32, .max_hw_frame_size = DEFAULT_JUMBO, diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index ffbc08f56c40..ad0edd11015d 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -90,9 +90,6 @@ struct e1000_info; #define E1000_MNG_VLAN_NONE (-1) -/* Number of packet split data buffers (not including the header buffer) */ -#define PS_PAGE_BUFFERS (MAX_PS_BUFFERS - 1) - #define DEFAULT_JUMBO 9234 /* Time to wait before putting the device into D3 if there's no link (in ms). */ diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index 59c22bf18701..a8633b8f0ac5 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -173,7 +173,7 @@ static int e1000_get_settings(struct net_device *netdev, speed = adapter->link_speed; ecmd->duplex = adapter->link_duplex - 1; } - } else { + } else if (!pm_runtime_suspended(netdev->dev.parent)) { u32 status = er32(STATUS); if (status & E1000_STATUS_LU) { if (status & E1000_STATUS_SPEED_1000) @@ -264,6 +264,9 @@ static int e1000_set_settings(struct net_device *netdev, { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; + int ret_val = 0; + + pm_runtime_get_sync(netdev->dev.parent); /* When SoL/IDER sessions are active, autoneg/speed/duplex * cannot be changed @@ -271,7 +274,8 @@ static int e1000_set_settings(struct net_device *netdev, if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw)) { e_err("Cannot change link characteristics when SoL/IDER is active.\n"); - return -EINVAL; + ret_val = -EINVAL; + goto out; } /* MDI setting is only allowed when autoneg enabled because @@ -279,13 +283,16 @@ static int e1000_set_settings(struct net_device *netdev, * duplex is forced. */ if (ecmd->eth_tp_mdix_ctrl) { - if (hw->phy.media_type != e1000_media_type_copper) - return -EOPNOTSUPP; + if (hw->phy.media_type != e1000_media_type_copper) { + ret_val = -EOPNOTSUPP; + goto out; + } if ((ecmd->eth_tp_mdix_ctrl != ETH_TP_MDI_AUTO) && (ecmd->autoneg != AUTONEG_ENABLE)) { e_err("forcing MDI/MDI-X state is not supported when link speed and/or duplex are forced\n"); - return -EINVAL; + ret_val = -EINVAL; + goto out; } } @@ -307,8 +314,8 @@ static int e1000_set_settings(struct net_device *netdev, u32 speed = ethtool_cmd_speed(ecmd); /* calling this overrides forced MDI setting */ if (e1000_set_spd_dplx(adapter, speed, ecmd->duplex)) { - clear_bit(__E1000_RESETTING, &adapter->state); - return -EINVAL; + ret_val = -EINVAL; + goto out; } } @@ -331,8 +338,10 @@ static int e1000_set_settings(struct net_device *netdev, e1000e_reset(adapter); } +out: + pm_runtime_put_sync(netdev->dev.parent); clear_bit(__E1000_RESETTING, &adapter->state); - return 0; + return ret_val; } static void e1000_get_pauseparam(struct net_device *netdev, @@ -366,6 +375,8 @@ static int e1000_set_pauseparam(struct net_device *netdev, while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) usleep_range(1000, 2000); + pm_runtime_get_sync(netdev->dev.parent); + if (adapter->fc_autoneg == AUTONEG_ENABLE) { hw->fc.requested_mode = e1000_fc_default; if (netif_running(adapter->netdev)) { @@ -398,6 +409,7 @@ static int e1000_set_pauseparam(struct net_device *netdev, } out: + pm_runtime_put_sync(netdev->dev.parent); clear_bit(__E1000_RESETTING, &adapter->state); return retval; } @@ -428,6 +440,8 @@ static void e1000_get_regs(struct net_device *netdev, u32 *regs_buff = p; u16 phy_data; + pm_runtime_get_sync(netdev->dev.parent); + memset(p, 0, E1000_REGS_LEN * sizeof(u32)); regs->version = (1 << 24) | (adapter->pdev->revision << 16) | @@ -472,6 +486,8 @@ static void e1000_get_regs(struct net_device *netdev, e1e_rphy(hw, MII_STAT1000, &phy_data); regs_buff[24] = (u32)phy_data; /* phy local receiver status */ regs_buff[25] = regs_buff[24]; /* phy remote receiver status */ + + pm_runtime_put_sync(netdev->dev.parent); } static int e1000_get_eeprom_len(struct net_device *netdev) @@ -504,6 +520,8 @@ static int e1000_get_eeprom(struct net_device *netdev, if (!eeprom_buff) return -ENOMEM; + pm_runtime_get_sync(netdev->dev.parent); + if (hw->nvm.type == e1000_nvm_eeprom_spi) { ret_val = e1000_read_nvm(hw, first_word, last_word - first_word + 1, @@ -517,6 +535,8 @@ static int e1000_get_eeprom(struct net_device *netdev, } } + pm_runtime_put_sync(netdev->dev.parent); + if (ret_val) { /* a read error occurred, throw away the result */ memset(eeprom_buff, 0xff, sizeof(u16) * @@ -566,6 +586,8 @@ static int e1000_set_eeprom(struct net_device *netdev, ptr = (void *)eeprom_buff; + pm_runtime_get_sync(netdev->dev.parent); + if (eeprom->offset & 1) { /* need read/modify/write of first changed EEPROM word */ /* only the second byte of the word is being modified */ @@ -606,6 +628,7 @@ static int e1000_set_eeprom(struct net_device *netdev, ret_val = e1000e_update_nvm_checksum(hw); out: + pm_runtime_put_sync(netdev->dev.parent); kfree(eeprom_buff); return ret_val; } @@ -701,6 +724,8 @@ static int e1000_set_ringparam(struct net_device *netdev, } } + pm_runtime_get_sync(netdev->dev.parent); + e1000e_down(adapter); /* We can't just free everything and then setup again, because the @@ -739,6 +764,7 @@ err_setup_rx: e1000e_free_tx_resources(temp_tx); err_setup: e1000e_up(adapter); + pm_runtime_put_sync(netdev->dev.parent); free_temp: vfree(temp_tx); vfree(temp_rx); @@ -1639,7 +1665,7 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter) ret_val = 13; /* ret_val is the same as mis-compare */ break; } - if (jiffies >= (time + 20)) { + if (time_after(jiffies, time + 20)) { ret_val = 14; /* error code for time out error */ break; } @@ -1732,6 +1758,8 @@ static void e1000_diag_test(struct net_device *netdev, u8 autoneg; bool if_running = netif_running(netdev); + pm_runtime_get_sync(netdev->dev.parent); + set_bit(__E1000_TESTING, &adapter->state); if (!if_running) { @@ -1817,6 +1845,8 @@ static void e1000_diag_test(struct net_device *netdev, } msleep_interruptible(4 * 1000); + + pm_runtime_put_sync(netdev->dev.parent); } static void e1000_get_wol(struct net_device *netdev, @@ -1891,6 +1921,8 @@ static int e1000_set_phys_id(struct net_device *netdev, switch (state) { case ETHTOOL_ID_ACTIVE: + pm_runtime_get_sync(netdev->dev.parent); + if (!hw->mac.ops.blink_led) return 2; /* cycle on/off twice per second */ @@ -1902,6 +1934,7 @@ static int e1000_set_phys_id(struct net_device *netdev, e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0); hw->mac.ops.led_off(hw); hw->mac.ops.cleanup_led(hw); + pm_runtime_put_sync(netdev->dev.parent); break; case ETHTOOL_ID_ON: @@ -1912,6 +1945,7 @@ static int e1000_set_phys_id(struct net_device *netdev, hw->mac.ops.led_off(hw); break; } + return 0; } @@ -1950,11 +1984,15 @@ static int e1000_set_coalesce(struct net_device *netdev, adapter->itr_setting = adapter->itr & ~3; } + pm_runtime_get_sync(netdev->dev.parent); + if (adapter->itr_setting != 0) e1000e_write_itr(adapter, adapter->itr); else e1000e_write_itr(adapter, 0); + pm_runtime_put_sync(netdev->dev.parent); + return 0; } @@ -1968,7 +2006,9 @@ static int e1000_nway_reset(struct net_device *netdev) if (!adapter->hw.mac.autoneg) return -EINVAL; + pm_runtime_get_sync(netdev->dev.parent); e1000e_reinit_locked(adapter); + pm_runtime_put_sync(netdev->dev.parent); return 0; } @@ -1982,7 +2022,12 @@ static void e1000_get_ethtool_stats(struct net_device *netdev, int i; char *p = NULL; + pm_runtime_get_sync(netdev->dev.parent); + e1000e_get_stats64(netdev, &net_stats); + + pm_runtime_put_sync(netdev->dev.parent); + for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) { switch (e1000_gstrings_stats[i].type) { case NETDEV_STATS: @@ -2033,7 +2078,11 @@ static int e1000_get_rxnfc(struct net_device *netdev, case ETHTOOL_GRXFH: { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - u32 mrqc = er32(MRQC); + u32 mrqc; + + pm_runtime_get_sync(netdev->dev.parent); + mrqc = er32(MRQC); + pm_runtime_put_sync(netdev->dev.parent); if (!(mrqc & E1000_MRQC_RSS_FIELD_MASK)) return 0; @@ -2096,9 +2145,13 @@ static int e1000e_get_eee(struct net_device *netdev, struct ethtool_eee *edata) return -EOPNOTSUPP; } + pm_runtime_get_sync(netdev->dev.parent); + ret_val = hw->phy.ops.acquire(hw); - if (ret_val) + if (ret_val) { + pm_runtime_put_sync(netdev->dev.parent); return -EBUSY; + } /* EEE Capability */ ret_val = e1000_read_emi_reg_locked(hw, cap_addr, &phy_data); @@ -2117,14 +2170,11 @@ static int e1000e_get_eee(struct net_device *netdev, struct ethtool_eee *edata) /* EEE PCS Status */ ret_val = e1000_read_emi_reg_locked(hw, pcs_stat_addr, &phy_data); + if (ret_val) + goto release; if (hw->phy.type == e1000_phy_82579) phy_data <<= 8; -release: - hw->phy.ops.release(hw); - if (ret_val) - return -ENODATA; - /* Result of the EEE auto negotiation - there is no register that * has the status of the EEE negotiation so do a best-guess based * on whether Tx or Rx LPI indications have been received. @@ -2136,7 +2186,14 @@ release: edata->tx_lpi_enabled = true; edata->tx_lpi_timer = er32(LPIC) >> E1000_LPIC_LPIET_SHIFT; - return 0; +release: + hw->phy.ops.release(hw); + if (ret_val) + ret_val = -ENODATA; + + pm_runtime_put_sync(netdev->dev.parent); + + return ret_val; } static int e1000e_set_eee(struct net_device *netdev, struct ethtool_eee *edata) @@ -2169,12 +2226,16 @@ static int e1000e_set_eee(struct net_device *netdev, struct ethtool_eee *edata) hw->dev_spec.ich8lan.eee_disable = !edata->eee_enabled; + pm_runtime_get_sync(netdev->dev.parent); + /* reset the link */ if (netif_running(netdev)) e1000e_reinit_locked(adapter); else e1000e_reset(adapter); + pm_runtime_put_sync(netdev->dev.parent); + return 0; } @@ -2212,19 +2273,7 @@ static int e1000e_get_ts_info(struct net_device *netdev, return 0; } -static int e1000e_ethtool_begin(struct net_device *netdev) -{ - return pm_runtime_get_sync(netdev->dev.parent); -} - -static void e1000e_ethtool_complete(struct net_device *netdev) -{ - pm_runtime_put_sync(netdev->dev.parent); -} - static const struct ethtool_ops e1000_ethtool_ops = { - .begin = e1000e_ethtool_begin, - .complete = e1000e_ethtool_complete, .get_settings = e1000_get_settings, .set_settings = e1000_set_settings, .get_drvinfo = e1000_get_drvinfo, diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h index a6f903a9b773..b7f38435d1fd 100644 --- a/drivers/net/ethernet/intel/e1000e/hw.h +++ b/drivers/net/ethernet/intel/e1000e/hw.h @@ -90,6 +90,10 @@ struct e1000_hw; #define E1000_DEV_ID_PCH_LPT_I217_V 0x153B #define E1000_DEV_ID_PCH_LPTLP_I218_LM 0x155A #define E1000_DEV_ID_PCH_LPTLP_I218_V 0x1559 +#define E1000_DEV_ID_PCH_I218_LM2 0x15A0 +#define E1000_DEV_ID_PCH_I218_V2 0x15A1 +#define E1000_DEV_ID_PCH_I218_LM3 0x15A2 /* Wildcat Point PCH */ +#define E1000_DEV_ID_PCH_I218_V3 0x15A3 /* Wildcat Point PCH */ #define E1000_REVISION_4 4 @@ -227,6 +231,10 @@ union e1000_rx_desc_extended { }; #define MAX_PS_BUFFERS 4 + +/* Number of packet split data buffers (not including the header buffer) */ +#define PS_PAGE_BUFFERS (MAX_PS_BUFFERS - 1) + /* Receive Descriptor - Packet Split */ union e1000_rx_desc_packet_split { struct { @@ -251,7 +259,8 @@ union e1000_rx_desc_packet_split { } middle; struct { __le16 header_status; - __le16 length[3]; /* length of buffers 1-3 */ + /* length of buffers 1-3 */ + __le16 length[PS_PAGE_BUFFERS]; } upper; __le64 reserved; } wb; /* writeback */ diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 9dde390f7e71..af08188d7e62 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -185,6 +185,7 @@ static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw) u32 phy_id = 0; s32 ret_val; u16 retry_count; + u32 mac_reg = 0; for (retry_count = 0; retry_count < 2; retry_count++) { ret_val = e1e_rphy_locked(hw, MII_PHYSID1, &phy_reg); @@ -203,11 +204,11 @@ static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw) if (hw->phy.id) { if (hw->phy.id == phy_id) - return true; + goto out; } else if (phy_id) { hw->phy.id = phy_id; hw->phy.revision = (u32)(phy_reg & ~PHY_REVISION_MASK); - return true; + goto out; } /* In case the PHY needs to be in mdio slow mode, @@ -219,7 +220,22 @@ static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw) ret_val = e1000e_get_phy_id(hw); hw->phy.ops.acquire(hw); - return !ret_val; + if (ret_val) + return false; +out: + if (hw->mac.type == e1000_pch_lpt) { + /* Unforce SMBus mode in PHY */ + e1e_rphy_locked(hw, CV_SMB_CTRL, &phy_reg); + phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS; + e1e_wphy_locked(hw, CV_SMB_CTRL, phy_reg); + + /* Unforce SMBus mode in MAC */ + mac_reg = er32(CTRL_EXT); + mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, mac_reg); + } + + return true; } /** @@ -233,7 +249,6 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) { u32 mac_reg, fwsm = er32(FWSM); s32 ret_val; - u16 phy_reg; /* Gate automatic PHY configuration by hardware on managed and * non-managed 82579 and newer adapters. @@ -262,22 +277,16 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS; ew32(CTRL_EXT, mac_reg); + /* Wait 50 milliseconds for MAC to finish any retries + * that it might be trying to perform from previous + * attempts to acknowledge any phy read requests. + */ + msleep(50); + /* fall-through */ case e1000_pch2lan: - if (e1000_phy_is_accessible_pchlan(hw)) { - if (hw->mac.type == e1000_pch_lpt) { - /* Unforce SMBus mode in PHY */ - e1e_rphy_locked(hw, CV_SMB_CTRL, &phy_reg); - phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS; - e1e_wphy_locked(hw, CV_SMB_CTRL, phy_reg); - - /* Unforce SMBus mode in MAC */ - mac_reg = er32(CTRL_EXT); - mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS; - ew32(CTRL_EXT, mac_reg); - } + if (e1000_phy_is_accessible_pchlan(hw)) break; - } /* fall-through */ case e1000_pchlan: @@ -287,6 +296,7 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) if (hw->phy.ops.check_reset_block(hw)) { e_dbg("Required LANPHYPC toggle blocked by ME\n"); + ret_val = -E1000_ERR_PHY; break; } @@ -298,15 +308,6 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) mac_reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC; ew32(FEXTNVM3, mac_reg); - if (hw->mac.type == e1000_pch_lpt) { - /* Toggling LANPHYPC brings the PHY out of SMBus mode - * So ensure that the MAC is also out of SMBus mode - */ - mac_reg = er32(CTRL_EXT); - mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS; - ew32(CTRL_EXT, mac_reg); - } - /* Toggle LANPHYPC Value bit */ mac_reg = er32(CTRL); mac_reg |= E1000_CTRL_LANPHYPC_OVERRIDE; @@ -325,6 +326,21 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) usleep_range(5000, 10000); } while (!(er32(CTRL_EXT) & E1000_CTRL_EXT_LPCD) && count--); + usleep_range(30000, 60000); + if (e1000_phy_is_accessible_pchlan(hw)) + break; + + /* Toggling LANPHYPC brings the PHY out of SMBus mode + * so ensure that the MAC is also out of SMBus mode + */ + mac_reg = er32(CTRL_EXT); + mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, mac_reg); + + if (e1000_phy_is_accessible_pchlan(hw)) + break; + + ret_val = -E1000_ERR_PHY; } break; default: @@ -332,13 +348,14 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) } hw->phy.ops.release(hw); - - /* Reset the PHY before any access to it. Doing so, ensures - * that the PHY is in a known good state before we read/write - * PHY registers. The generic reset is sufficient here, - * because we haven't determined the PHY type yet. - */ - ret_val = e1000e_phy_hw_reset_generic(hw); + if (!ret_val) { + /* Reset the PHY before any access to it. Doing so, ensures + * that the PHY is in a known good state before we read/write + * PHY registers. The generic reset is sufficient here, + * because we haven't determined the PHY type yet. + */ + ret_val = e1000e_phy_hw_reset_generic(hw); + } out: /* Ungate automatic PHY configuration on non-managed 82579 */ @@ -793,29 +810,31 @@ release: * When K1 is enabled for 1Gbps, the MAC can miss 2 DMA completion indications * preventing further DMA write requests. Workaround the issue by disabling * the de-assertion of the clock request when in 1Gpbs mode. + * Also, set appropriate Tx re-transmission timeouts for 10 and 100Half link + * speeds in order to avoid Tx hangs. **/ static s32 e1000_k1_workaround_lpt_lp(struct e1000_hw *hw, bool link) { u32 fextnvm6 = er32(FEXTNVM6); + u32 status = er32(STATUS); s32 ret_val = 0; + u16 reg; - if (link && (er32(STATUS) & E1000_STATUS_SPEED_1000)) { - u16 kmrn_reg; - + if (link && (status & E1000_STATUS_SPEED_1000)) { ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; ret_val = e1000e_read_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG, - &kmrn_reg); + ®); if (ret_val) goto release; ret_val = e1000e_write_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG, - kmrn_reg & + reg & ~E1000_KMRNCTRLSTA_K1_ENABLE); if (ret_val) goto release; @@ -827,12 +846,45 @@ static s32 e1000_k1_workaround_lpt_lp(struct e1000_hw *hw, bool link) ret_val = e1000e_write_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG, - kmrn_reg); + reg); release: hw->phy.ops.release(hw); } else { /* clear FEXTNVM6 bit 8 on link down or 10/100 */ - ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK); + fextnvm6 &= ~E1000_FEXTNVM6_REQ_PLL_CLK; + + if (!link || ((status & E1000_STATUS_SPEED_100) && + (status & E1000_STATUS_FD))) + goto update_fextnvm6; + + ret_val = e1e_rphy(hw, I217_INBAND_CTRL, ®); + if (ret_val) + return ret_val; + + /* Clear link status transmit timeout */ + reg &= ~I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_MASK; + + if (status & E1000_STATUS_SPEED_100) { + /* Set inband Tx timeout to 5x10us for 100Half */ + reg |= 5 << I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_SHIFT; + + /* Do not extend the K1 entry latency for 100Half */ + fextnvm6 &= ~E1000_FEXTNVM6_ENABLE_K1_ENTRY_CONDITION; + } else { + /* Set inband Tx timeout to 50x10us for 10Full/Half */ + reg |= 50 << + I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_SHIFT; + + /* Extend the K1 entry latency for 10 Mbps */ + fextnvm6 |= E1000_FEXTNVM6_ENABLE_K1_ENTRY_CONDITION; + } + + ret_val = e1e_wphy(hw, I217_INBAND_CTRL, reg); + if (ret_val) + return ret_val; + +update_fextnvm6: + ew32(FEXTNVM6, fextnvm6); } return ret_val; @@ -993,7 +1045,9 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) /* Work-around I218 hang issue */ if ((hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_LM) || - (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_V)) { + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_V) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_LM3) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_V3)) { ret_val = e1000_k1_workaround_lpt_lp(hw, link); if (ret_val) return ret_val; @@ -4168,7 +4222,9 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw) u16 phy_reg, device_id = hw->adapter->pdev->device; if ((device_id == E1000_DEV_ID_PCH_LPTLP_I218_LM) || - (device_id == E1000_DEV_ID_PCH_LPTLP_I218_V)) { + (device_id == E1000_DEV_ID_PCH_LPTLP_I218_V) || + (device_id == E1000_DEV_ID_PCH_I218_LM3) || + (device_id == E1000_DEV_ID_PCH_I218_V3)) { u32 fextnvm6 = er32(FEXTNVM6); ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK); diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h index 80034a2b297c..59865695b282 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.h +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h @@ -93,6 +93,7 @@ #define E1000_FEXTNVM4_BEACON_DURATION_16USEC 0x3 #define E1000_FEXTNVM6_REQ_PLL_CLK 0x00000100 +#define E1000_FEXTNVM6_ENABLE_K1_ENTRY_CONDITION 0x00000200 #define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL @@ -197,6 +198,11 @@ #define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in ms */ +/* Inband Control */ +#define I217_INBAND_CTRL PHY_REG(770, 18) +#define I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_MASK 0x3F00 +#define I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_SHIFT 8 + /* PHY Low Power Idle Control */ #define I82579_LPI_CTRL PHY_REG(772, 20) #define I82579_LPI_CTRL_100_ENABLE 0x2000 diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 77f81cbb601a..e87e9b01f404 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -64,8 +64,6 @@ static int debug = -1; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); -static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state); - static const struct e1000_info *e1000_info_tbl[] = { [board_82571] = &e1000_82571_info, [board_82572] = &e1000_82572_info, @@ -2979,17 +2977,10 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) u32 pages = 0; /* Workaround Si errata on PCHx - configure jumbo frame flow */ - if (hw->mac.type >= e1000_pch2lan) { - s32 ret_val; - - if (adapter->netdev->mtu > ETH_DATA_LEN) - ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, true); - else - ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, false); - - if (ret_val) - e_dbg("failed to enable jumbo frame workaround mode\n"); - } + if ((hw->mac.type >= e1000_pch2lan) && + (adapter->netdev->mtu > ETH_DATA_LEN) && + e1000_lv_jumbo_workaround_ich8lan(hw, true)) + e_dbg("failed to enable jumbo frame workaround mode\n"); /* Program MC offset vector base */ rctl = er32(RCTL); @@ -3826,6 +3817,8 @@ void e1000e_reset(struct e1000_adapter *adapter) break; } + pba = 14; + ew32(PBA, pba); fc->high_water = ((pba << 10) * 9 / 10) & E1000_FCRTH_RTH; fc->low_water = ((pba << 10) * 8 / 10) & E1000_FCRTL_RTL; break; @@ -4034,6 +4027,12 @@ void e1000e_down(struct e1000_adapter *adapter) adapter->link_speed = 0; adapter->link_duplex = 0; + /* Disable Si errata workaround on PCHx for jumbo frame flow */ + if ((hw->mac.type >= e1000_pch2lan) && + (adapter->netdev->mtu > ETH_DATA_LEN) && + e1000_lv_jumbo_workaround_ich8lan(hw, false)) + e_dbg("failed to disable jumbo frame workaround mode\n"); + if (!pci_channel_offline(adapter->pdev)) e1000e_reset(adapter); @@ -4683,11 +4682,11 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) struct e1000_hw *hw = &adapter->hw; struct e1000_phy_regs *phy = &adapter->phy_regs; - if ((er32(STATUS) & E1000_STATUS_LU) && + if (!pm_runtime_suspended((&adapter->pdev->dev)->parent) && + (er32(STATUS) & E1000_STATUS_LU) && (adapter->hw.phy.media_type == e1000_media_type_copper)) { int ret_val; - pm_runtime_get_sync(&adapter->pdev->dev); ret_val = e1e_rphy(hw, MII_BMCR, &phy->bmcr); ret_val |= e1e_rphy(hw, MII_BMSR, &phy->bmsr); ret_val |= e1e_rphy(hw, MII_ADVERTISE, &phy->advertise); @@ -4698,7 +4697,6 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) ret_val |= e1e_rphy(hw, MII_ESTATUS, &phy->estatus); if (ret_val) e_warn("Error reading PHY register\n"); - pm_runtime_put_sync(&adapter->pdev->dev); } else { /* Do not read PHY registers if link is not up * Set values to typical power-on defaults @@ -5995,15 +5993,24 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) */ e1000e_release_hw_control(adapter); + pci_clear_master(pdev); + /* The pci-e switch on some quad port adapters will report a * correctable error when the MAC transitions from D0 to D3. To * prevent this we need to mask off the correctable errors on the * downstream port of the pci-e switch. + * + * We don't have the associated upstream bridge while assigning + * the PCI device into guest. For example, the KVM on power is + * one of the cases. */ if (adapter->flags & FLAG_IS_QUAD_PORT) { struct pci_dev *us_dev = pdev->bus->self; u16 devctl; + if (!us_dev) + return 0; + pcie_capability_read_word(us_dev, PCI_EXP_DEVCTL, &devctl); pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL, (devctl & ~PCI_EXP_DEVCTL_CERE)); @@ -6017,38 +6024,73 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) return 0; } -#ifdef CONFIG_PCIEASPM -static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state) +/** + * e1000e_disable_aspm - Disable ASPM states + * @pdev: pointer to PCI device struct + * @state: bit-mask of ASPM states to disable + * + * Some devices *must* have certain ASPM states disabled per hardware errata. + **/ +static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state) { + struct pci_dev *parent = pdev->bus->self; + u16 aspm_dis_mask = 0; + u16 pdev_aspmc, parent_aspmc; + + switch (state) { + case PCIE_LINK_STATE_L0S: + case PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1: + aspm_dis_mask |= PCI_EXP_LNKCTL_ASPM_L0S; + /* fall-through - can't have L1 without L0s */ + case PCIE_LINK_STATE_L1: + aspm_dis_mask |= PCI_EXP_LNKCTL_ASPM_L1; + break; + default: + return; + } + + pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &pdev_aspmc); + pdev_aspmc &= PCI_EXP_LNKCTL_ASPMC; + + if (parent) { + pcie_capability_read_word(parent, PCI_EXP_LNKCTL, + &parent_aspmc); + parent_aspmc &= PCI_EXP_LNKCTL_ASPMC; + } + + /* Nothing to do if the ASPM states to be disabled already are */ + if (!(pdev_aspmc & aspm_dis_mask) && + (!parent || !(parent_aspmc & aspm_dis_mask))) + return; + + dev_info(&pdev->dev, "Disabling ASPM %s %s\n", + (aspm_dis_mask & pdev_aspmc & PCI_EXP_LNKCTL_ASPM_L0S) ? + "L0s" : "", + (aspm_dis_mask & pdev_aspmc & PCI_EXP_LNKCTL_ASPM_L1) ? + "L1" : ""); + +#ifdef CONFIG_PCIEASPM pci_disable_link_state_locked(pdev, state); -} -#else -static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state) -{ - u16 aspm_ctl = 0; - if (state & PCIE_LINK_STATE_L0S) - aspm_ctl |= PCI_EXP_LNKCTL_ASPM_L0S; - if (state & PCIE_LINK_STATE_L1) - aspm_ctl |= PCI_EXP_LNKCTL_ASPM_L1; + /* Double-check ASPM control. If not disabled by the above, the + * BIOS is preventing that from happening (or CONFIG_PCIEASPM is + * not enabled); override by writing PCI config space directly. + */ + pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &pdev_aspmc); + pdev_aspmc &= PCI_EXP_LNKCTL_ASPMC; + + if (!(aspm_dis_mask & pdev_aspmc)) + return; +#endif /* Both device and parent should have the same ASPM setting. * Disable ASPM in downstream component first and then upstream. */ - pcie_capability_clear_word(pdev, PCI_EXP_LNKCTL, aspm_ctl); + pcie_capability_clear_word(pdev, PCI_EXP_LNKCTL, aspm_dis_mask); - if (pdev->bus->self) - pcie_capability_clear_word(pdev->bus->self, PCI_EXP_LNKCTL, - aspm_ctl); -} -#endif -static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state) -{ - dev_info(&pdev->dev, "Disabling ASPM %s %s\n", - (state & PCIE_LINK_STATE_L0S) ? "L0s" : "", - (state & PCIE_LINK_STATE_L1) ? "L1" : ""); - - __e1000e_disable_aspm(pdev, state); + if (parent) + pcie_capability_clear_word(parent, PCI_EXP_LNKCTL, + aspm_dis_mask); } #ifdef CONFIG_PM @@ -6723,10 +6765,6 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) adapter->hw.fc.current_mode = e1000_fc_default; adapter->hw.phy.autoneg_advertised = 0x2f; - /* ring size defaults */ - adapter->rx_ring->count = E1000_DEFAULT_RXD; - adapter->tx_ring->count = E1000_DEFAULT_TXD; - /* Initial Wake on LAN setting - If APM wake is enabled in * the EEPROM, enable the ACPI Magic Packet filter */ @@ -6976,6 +7014,10 @@ static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = { { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPT_I217_V), board_pch_lpt }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPTLP_I218_LM), board_pch_lpt }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPTLP_I218_V), board_pch_lpt }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_LM2), board_pch_lpt }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_V2), board_pch_lpt }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_LM3), board_pch_lpt }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_V3), board_pch_lpt }, { 0, 0, 0, 0, 0, 0, 0 } /* terminate list */ }; diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index f21a91a299a2..d398fad6eedc 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -238,6 +238,7 @@ static s32 igb_init_nvm_params_82575(struct e1000_hw *hw) size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >> E1000_EECD_SIZE_EX_SHIFT); + /* Added to a constant, "size" becomes the left-shift value * for setting word_size. */ @@ -250,86 +251,52 @@ static s32 igb_init_nvm_params_82575(struct e1000_hw *hw) size = 15; nvm->word_size = 1 << size; - if (hw->mac.type < e1000_i210) { - nvm->opcode_bits = 8; - nvm->delay_usec = 1; - - switch (nvm->override) { - case e1000_nvm_override_spi_large: - nvm->page_size = 32; - nvm->address_bits = 16; - break; - case e1000_nvm_override_spi_small: - nvm->page_size = 8; - nvm->address_bits = 8; - break; - default: - nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8; - nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? - 16 : 8; - break; - } - if (nvm->word_size == (1 << 15)) - nvm->page_size = 128; + nvm->opcode_bits = 8; + nvm->delay_usec = 1; - nvm->type = e1000_nvm_eeprom_spi; - } else { - nvm->type = e1000_nvm_flash_hw; + switch (nvm->override) { + case e1000_nvm_override_spi_large: + nvm->page_size = 32; + nvm->address_bits = 16; + break; + case e1000_nvm_override_spi_small: + nvm->page_size = 8; + nvm->address_bits = 8; + break; + default: + nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8; + nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? + 16 : 8; + break; } + if (nvm->word_size == (1 << 15)) + nvm->page_size = 128; + + nvm->type = e1000_nvm_eeprom_spi; /* NVM Function Pointers */ + nvm->ops.acquire = igb_acquire_nvm_82575; + nvm->ops.release = igb_release_nvm_82575; + nvm->ops.write = igb_write_nvm_spi; + nvm->ops.validate = igb_validate_nvm_checksum; + nvm->ops.update = igb_update_nvm_checksum; + if (nvm->word_size < (1 << 15)) + nvm->ops.read = igb_read_nvm_eerd; + else + nvm->ops.read = igb_read_nvm_spi; + + /* override generic family function pointers for specific descendants */ switch (hw->mac.type) { case e1000_82580: nvm->ops.validate = igb_validate_nvm_checksum_82580; nvm->ops.update = igb_update_nvm_checksum_82580; - nvm->ops.acquire = igb_acquire_nvm_82575; - nvm->ops.release = igb_release_nvm_82575; - if (nvm->word_size < (1 << 15)) - nvm->ops.read = igb_read_nvm_eerd; - else - nvm->ops.read = igb_read_nvm_spi; - nvm->ops.write = igb_write_nvm_spi; break; case e1000_i354: case e1000_i350: nvm->ops.validate = igb_validate_nvm_checksum_i350; nvm->ops.update = igb_update_nvm_checksum_i350; - nvm->ops.acquire = igb_acquire_nvm_82575; - nvm->ops.release = igb_release_nvm_82575; - if (nvm->word_size < (1 << 15)) - nvm->ops.read = igb_read_nvm_eerd; - else - nvm->ops.read = igb_read_nvm_spi; - nvm->ops.write = igb_write_nvm_spi; - break; - case e1000_i210: - nvm->ops.validate = igb_validate_nvm_checksum_i210; - nvm->ops.update = igb_update_nvm_checksum_i210; - nvm->ops.acquire = igb_acquire_nvm_i210; - nvm->ops.release = igb_release_nvm_i210; - nvm->ops.read = igb_read_nvm_srrd_i210; - nvm->ops.write = igb_write_nvm_srwr_i210; - nvm->ops.valid_led_default = igb_valid_led_default_i210; - break; - case e1000_i211: - nvm->ops.acquire = igb_acquire_nvm_i210; - nvm->ops.release = igb_release_nvm_i210; - nvm->ops.read = igb_read_nvm_i211; - nvm->ops.valid_led_default = igb_valid_led_default_i210; - nvm->ops.validate = NULL; - nvm->ops.update = NULL; - nvm->ops.write = NULL; break; default: - nvm->ops.validate = igb_validate_nvm_checksum; - nvm->ops.update = igb_update_nvm_checksum; - nvm->ops.acquire = igb_acquire_nvm_82575; - nvm->ops.release = igb_release_nvm_82575; - if (nvm->word_size < (1 << 15)) - nvm->ops.read = igb_read_nvm_eerd; - else - nvm->ops.read = igb_read_nvm_spi; - nvm->ops.write = igb_write_nvm_spi; break; } @@ -516,6 +483,8 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) case E1000_DEV_ID_I210_FIBER: case E1000_DEV_ID_I210_SERDES: case E1000_DEV_ID_I210_SGMII: + case E1000_DEV_ID_I210_COPPER_FLASHLESS: + case E1000_DEV_ID_I210_SERDES_FLASHLESS: mac->type = e1000_i210; break; case E1000_DEV_ID_I211_COPPER: @@ -601,6 +570,15 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) /* NVM initialization */ ret_val = igb_init_nvm_params_82575(hw); + switch (hw->mac.type) { + case e1000_i210: + case e1000_i211: + ret_val = igb_init_nvm_params_i210(hw); + break; + default: + break; + } + if (ret_val) goto out; @@ -1320,7 +1298,7 @@ void igb_shutdown_serdes_link_82575(struct e1000_hw *hw) **/ static s32 igb_reset_hw_82575(struct e1000_hw *hw) { - u32 ctrl, icr; + u32 ctrl; s32 ret_val; /* Prevent the PCI-E bus from sticking if there is no TLP connection @@ -1365,7 +1343,7 @@ static s32 igb_reset_hw_82575(struct e1000_hw *hw) /* Clear any pending interrupt events. */ wr32(E1000_IMC, 0xffffffff); - icr = rd32(E1000_ICR); + rd32(E1000_ICR); /* Install any alternate MAC address into RAR0 */ ret_val = igb_check_alt_mac_addr(hw); @@ -2103,10 +2081,9 @@ static s32 igb_reset_hw_82580(struct e1000_hw *hw) s32 ret_val = 0; /* BH SW mailbox bit in SW_FW_SYNC */ u16 swmbsw_mask = E1000_SW_SYNCH_MB; - u32 ctrl, icr; + u32 ctrl; bool global_device_reset = hw->dev_spec._82575.global_device_reset; - hw->dev_spec._82575.global_device_reset = false; /* due to hw errata, global device reset doesn't always @@ -2165,7 +2142,7 @@ static s32 igb_reset_hw_82580(struct e1000_hw *hw) /* Clear any pending interrupt events. */ wr32(E1000_IMC, 0xffffffff); - icr = rd32(E1000_ICR); + rd32(E1000_ICR); ret_val = igb_reset_mdicnfg_82580(hw); if (ret_val) diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h index aa201abb8ad2..60559af39a98 100644 --- a/drivers/net/ethernet/intel/igb/e1000_defines.h +++ b/drivers/net/ethernet/intel/igb/e1000_defines.h @@ -620,6 +620,7 @@ #define E1000_EECD_SIZE_EX_SHIFT 11 #define E1000_EECD_FLUPD_I210 0x00800000 /* Update FLASH */ #define E1000_EECD_FLUDONE_I210 0x04000000 /* Update FLASH done*/ +#define E1000_EECD_FLASH_DETECTED_I210 0x00080000 /* FLASH detected */ #define E1000_FLUDONE_ATTEMPTS 20000 #define E1000_EERD_EEWR_MAX_COUNT 512 /* buffered EEPROM words rw */ #define E1000_I210_FIFO_SEL_RX 0x00 @@ -627,6 +628,11 @@ #define E1000_I210_FIFO_SEL_TX_LEGACY E1000_I210_FIFO_SEL_TX_QAV(0) #define E1000_I210_FIFO_SEL_BMC2OS_TX 0x06 #define E1000_I210_FIFO_SEL_BMC2OS_RX 0x01 +#define E1000_I210_FLASH_SECTOR_SIZE 0x1000 /* 4KB FLASH sector unit size */ +/* Secure FLASH mode requires removing MSb */ +#define E1000_I210_FW_PTR_MASK 0x7FFF +/* Firmware code revision field word offset*/ +#define E1000_I210_FW_VER_OFFSET 328 #define E1000_EECD_FLUPD_I210 0x00800000 /* Update FLASH */ #define E1000_EECD_FLUDONE_I210 0x04000000 /* Update FLASH done*/ #define E1000_FLUDONE_ATTEMPTS 20000 @@ -665,20 +671,26 @@ #define NVM_INIT_CTRL_4 0x0013 #define NVM_LED_1_CFG 0x001C #define NVM_LED_0_2_CFG 0x001F - -/* NVM version defines */ #define NVM_ETRACK_WORD 0x0042 +#define NVM_ETRACK_HIWORD 0x0043 #define NVM_COMB_VER_OFF 0x0083 #define NVM_COMB_VER_PTR 0x003d -#define NVM_MAJOR_MASK 0xF000 -#define NVM_MINOR_MASK 0x0FF0 -#define NVM_BUILD_MASK 0x000F -#define NVM_COMB_VER_MASK 0x00FF -#define NVM_MAJOR_SHIFT 12 -#define NVM_MINOR_SHIFT 4 -#define NVM_COMB_VER_SHFT 8 -#define NVM_VER_INVALID 0xFFFF -#define NVM_ETRACK_SHIFT 16 + +/* NVM version defines */ +#define NVM_MAJOR_MASK 0xF000 +#define NVM_MINOR_MASK 0x0FF0 +#define NVM_IMAGE_ID_MASK 0x000F +#define NVM_COMB_VER_MASK 0x00FF +#define NVM_MAJOR_SHIFT 12 +#define NVM_MINOR_SHIFT 4 +#define NVM_COMB_VER_SHFT 8 +#define NVM_VER_INVALID 0xFFFF +#define NVM_ETRACK_SHIFT 16 +#define NVM_ETRACK_VALID 0x8000 +#define NVM_NEW_DEC_MASK 0x0F00 +#define NVM_HEX_CONV 16 +#define NVM_HEX_TENS 10 + #define NVM_ETS_CFG 0x003E #define NVM_ETS_LTHRES_DELTA_MASK 0x07C0 #define NVM_ETS_LTHRES_DELTA_SHIFT 6 diff --git a/drivers/net/ethernet/intel/igb/e1000_hw.h b/drivers/net/ethernet/intel/igb/e1000_hw.h index 94d7866b9c20..37a9c06a6c68 100644 --- a/drivers/net/ethernet/intel/igb/e1000_hw.h +++ b/drivers/net/ethernet/intel/igb/e1000_hw.h @@ -67,6 +67,8 @@ struct e1000_hw; #define E1000_DEV_ID_I210_FIBER 0x1536 #define E1000_DEV_ID_I210_SERDES 0x1537 #define E1000_DEV_ID_I210_SGMII 0x1538 +#define E1000_DEV_ID_I210_COPPER_FLASHLESS 0x157B +#define E1000_DEV_ID_I210_SERDES_FLASHLESS 0x157C #define E1000_DEV_ID_I211_COPPER 0x1539 #define E1000_DEV_ID_I354_BACKPLANE_1GBPS 0x1F40 #define E1000_DEV_ID_I354_SGMII 0x1F41 @@ -110,6 +112,7 @@ enum e1000_nvm_type { e1000_nvm_none, e1000_nvm_eeprom_spi, e1000_nvm_flash_hw, + e1000_nvm_invm, e1000_nvm_flash_sw }; diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.c b/drivers/net/ethernet/intel/igb/e1000_i210.c index ddb3cf51b9b9..0c0393316a3a 100644 --- a/drivers/net/ethernet/intel/igb/e1000_i210.c +++ b/drivers/net/ethernet/intel/igb/e1000_i210.c @@ -335,57 +335,101 @@ s32 igb_write_nvm_srwr_i210(struct e1000_hw *hw, u16 offset, u16 words, } /** - * igb_read_nvm_i211 - Read NVM wrapper function for I211 + * igb_read_invm_word_i210 - Reads OTP + * @hw: pointer to the HW structure + * @address: the word address (aka eeprom offset) to read + * @data: pointer to the data read + * + * Reads 16-bit words from the OTP. Return error when the word is not + * stored in OTP. + **/ +static s32 igb_read_invm_word_i210(struct e1000_hw *hw, u8 address, u16 *data) +{ + s32 status = -E1000_ERR_INVM_VALUE_NOT_FOUND; + u32 invm_dword; + u16 i; + u8 record_type, word_address; + + for (i = 0; i < E1000_INVM_SIZE; i++) { + invm_dword = rd32(E1000_INVM_DATA_REG(i)); + /* Get record type */ + record_type = INVM_DWORD_TO_RECORD_TYPE(invm_dword); + if (record_type == E1000_INVM_UNINITIALIZED_STRUCTURE) + break; + if (record_type == E1000_INVM_CSR_AUTOLOAD_STRUCTURE) + i += E1000_INVM_CSR_AUTOLOAD_DATA_SIZE_IN_DWORDS; + if (record_type == E1000_INVM_RSA_KEY_SHA256_STRUCTURE) + i += E1000_INVM_RSA_KEY_SHA256_DATA_SIZE_IN_DWORDS; + if (record_type == E1000_INVM_WORD_AUTOLOAD_STRUCTURE) { + word_address = INVM_DWORD_TO_WORD_ADDRESS(invm_dword); + if (word_address == address) { + *data = INVM_DWORD_TO_WORD_DATA(invm_dword); + hw_dbg("Read INVM Word 0x%02x = %x", + address, *data); + status = E1000_SUCCESS; + break; + } + } + } + if (status != E1000_SUCCESS) + hw_dbg("Requested word 0x%02x not found in OTP\n", address); + return status; +} + +/** + * igb_read_invm_i210 - Read invm wrapper function for I210/I211 * @hw: pointer to the HW structure * @words: number of words to read * @data: pointer to the data read * * Wrapper function to return data formerly found in the NVM. **/ -s32 igb_read_nvm_i211(struct e1000_hw *hw, u16 offset, u16 words, - u16 *data) +static s32 igb_read_invm_i210(struct e1000_hw *hw, u16 offset, + u16 words __always_unused, u16 *data) { s32 ret_val = E1000_SUCCESS; /* Only the MAC addr is required to be present in the iNVM */ switch (offset) { case NVM_MAC_ADDR: - ret_val = igb_read_invm_i211(hw, offset, &data[0]); - ret_val |= igb_read_invm_i211(hw, offset+1, &data[1]); - ret_val |= igb_read_invm_i211(hw, offset+2, &data[2]); + ret_val = igb_read_invm_word_i210(hw, (u8)offset, &data[0]); + ret_val |= igb_read_invm_word_i210(hw, (u8)offset+1, + &data[1]); + ret_val |= igb_read_invm_word_i210(hw, (u8)offset+2, + &data[2]); if (ret_val != E1000_SUCCESS) hw_dbg("MAC Addr not found in iNVM\n"); break; case NVM_INIT_CTRL_2: - ret_val = igb_read_invm_i211(hw, (u8)offset, data); + ret_val = igb_read_invm_word_i210(hw, (u8)offset, data); if (ret_val != E1000_SUCCESS) { *data = NVM_INIT_CTRL_2_DEFAULT_I211; ret_val = E1000_SUCCESS; } break; case NVM_INIT_CTRL_4: - ret_val = igb_read_invm_i211(hw, (u8)offset, data); + ret_val = igb_read_invm_word_i210(hw, (u8)offset, data); if (ret_val != E1000_SUCCESS) { *data = NVM_INIT_CTRL_4_DEFAULT_I211; ret_val = E1000_SUCCESS; } break; case NVM_LED_1_CFG: - ret_val = igb_read_invm_i211(hw, (u8)offset, data); + ret_val = igb_read_invm_word_i210(hw, (u8)offset, data); if (ret_val != E1000_SUCCESS) { *data = NVM_LED_1_CFG_DEFAULT_I211; ret_val = E1000_SUCCESS; } break; case NVM_LED_0_2_CFG: - igb_read_invm_i211(hw, offset, data); + ret_val = igb_read_invm_word_i210(hw, (u8)offset, data); if (ret_val != E1000_SUCCESS) { *data = NVM_LED_0_2_CFG_DEFAULT_I211; ret_val = E1000_SUCCESS; } break; case NVM_ID_LED_SETTINGS: - ret_val = igb_read_invm_i211(hw, (u8)offset, data); + ret_val = igb_read_invm_word_i210(hw, (u8)offset, data); if (ret_val != E1000_SUCCESS) { *data = ID_LED_RESERVED_FFFF; ret_val = E1000_SUCCESS; @@ -411,48 +455,6 @@ s32 igb_read_nvm_i211(struct e1000_hw *hw, u16 offset, u16 words, } /** - * igb_read_invm_i211 - Reads OTP - * @hw: pointer to the HW structure - * @address: the word address (aka eeprom offset) to read - * @data: pointer to the data read - * - * Reads 16-bit words from the OTP. Return error when the word is not - * stored in OTP. - **/ -s32 igb_read_invm_i211(struct e1000_hw *hw, u16 address, u16 *data) -{ - s32 status = -E1000_ERR_INVM_VALUE_NOT_FOUND; - u32 invm_dword; - u16 i; - u8 record_type, word_address; - - for (i = 0; i < E1000_INVM_SIZE; i++) { - invm_dword = rd32(E1000_INVM_DATA_REG(i)); - /* Get record type */ - record_type = INVM_DWORD_TO_RECORD_TYPE(invm_dword); - if (record_type == E1000_INVM_UNINITIALIZED_STRUCTURE) - break; - if (record_type == E1000_INVM_CSR_AUTOLOAD_STRUCTURE) - i += E1000_INVM_CSR_AUTOLOAD_DATA_SIZE_IN_DWORDS; - if (record_type == E1000_INVM_RSA_KEY_SHA256_STRUCTURE) - i += E1000_INVM_RSA_KEY_SHA256_DATA_SIZE_IN_DWORDS; - if (record_type == E1000_INVM_WORD_AUTOLOAD_STRUCTURE) { - word_address = INVM_DWORD_TO_WORD_ADDRESS(invm_dword); - if (word_address == (u8)address) { - *data = INVM_DWORD_TO_WORD_DATA(invm_dword); - hw_dbg("Read INVM Word 0x%02x = %x", - address, *data); - status = E1000_SUCCESS; - break; - } - } - } - if (status != E1000_SUCCESS) - hw_dbg("Requested word 0x%02x not found in OTP\n", address); - return status; -} - -/** * igb_read_invm_version - Reads iNVM version and image type * @hw: pointer to the HW structure * @invm_ver: version structure for the version read @@ -661,6 +663,23 @@ static s32 igb_pool_flash_update_done_i210(struct e1000_hw *hw) } /** + * igb_get_flash_presence_i210 - Check if flash device is detected. + * @hw: pointer to the HW structure + * + **/ +bool igb_get_flash_presence_i210(struct e1000_hw *hw) +{ + u32 eec = 0; + bool ret_val = false; + + eec = rd32(E1000_EECD); + if (eec & E1000_EECD_FLASH_DETECTED_I210) + ret_val = true; + + return ret_val; +} + +/** * igb_update_flash_i210 - Commit EEPROM to the flash * @hw: pointer to the HW structure * @@ -786,3 +805,33 @@ s32 igb_write_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 data) { return __igb_access_xmdio_reg(hw, addr, dev_addr, &data, false); } + +/** + * igb_init_nvm_params_i210 - Init NVM func ptrs. + * @hw: pointer to the HW structure + **/ +s32 igb_init_nvm_params_i210(struct e1000_hw *hw) +{ + s32 ret_val = 0; + struct e1000_nvm_info *nvm = &hw->nvm; + + nvm->ops.acquire = igb_acquire_nvm_i210; + nvm->ops.release = igb_release_nvm_i210; + nvm->ops.valid_led_default = igb_valid_led_default_i210; + + /* NVM Function Pointers */ + if (igb_get_flash_presence_i210(hw)) { + hw->nvm.type = e1000_nvm_flash_hw; + nvm->ops.read = igb_read_nvm_srrd_i210; + nvm->ops.write = igb_write_nvm_srwr_i210; + nvm->ops.validate = igb_validate_nvm_checksum_i210; + nvm->ops.update = igb_update_nvm_checksum_i210; + } else { + hw->nvm.type = e1000_nvm_invm; + nvm->ops.read = igb_read_invm_i210; + nvm->ops.write = NULL; + nvm->ops.validate = NULL; + nvm->ops.update = NULL; + } + return ret_val; +} diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.h b/drivers/net/ethernet/intel/igb/e1000_i210.h index 5caa332e7556..dde3c4b7ea99 100644 --- a/drivers/net/ethernet/intel/igb/e1000_i210.h +++ b/drivers/net/ethernet/intel/igb/e1000_i210.h @@ -35,20 +35,19 @@ extern s32 igb_write_nvm_srwr_i210(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); extern s32 igb_read_nvm_srrd_i210(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); -extern s32 igb_read_invm_i211(struct e1000_hw *hw, u16 address, u16 *data); extern s32 igb_acquire_swfw_sync_i210(struct e1000_hw *hw, u16 mask); extern void igb_release_swfw_sync_i210(struct e1000_hw *hw, u16 mask); extern s32 igb_acquire_nvm_i210(struct e1000_hw *hw); extern void igb_release_nvm_i210(struct e1000_hw *hw); extern s32 igb_valid_led_default_i210(struct e1000_hw *hw, u16 *data); -extern s32 igb_read_nvm_i211(struct e1000_hw *hw, u16 offset, u16 words, - u16 *data); extern s32 igb_read_invm_version(struct e1000_hw *hw, struct e1000_fw_version *invm_ver); extern s32 igb_read_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 *data); extern s32 igb_write_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 data); +extern s32 igb_init_nvm_params_i210(struct e1000_hw *hw); +extern bool igb_get_flash_presence_i210(struct e1000_hw *hw); #define E1000_STM_OPCODE 0xDB00 #define E1000_EEPROM_FLASH_SIZE_WORD 0x11 diff --git a/drivers/net/ethernet/intel/igb/e1000_nvm.c b/drivers/net/ethernet/intel/igb/e1000_nvm.c index 7f9cd7cbd353..a7db7f3db914 100644 --- a/drivers/net/ethernet/intel/igb/e1000_nvm.c +++ b/drivers/net/ethernet/intel/igb/e1000_nvm.c @@ -709,11 +709,16 @@ out: **/ void igb_get_fw_version(struct e1000_hw *hw, struct e1000_fw_version *fw_vers) { - u16 eeprom_verh, eeprom_verl, comb_verh, comb_verl, comb_offset; - u16 fw_version; + u16 eeprom_verh, eeprom_verl, etrack_test, fw_version; + u8 q, hval, rem, result; + u16 comb_verh, comb_verl, comb_offset; memset(fw_vers, 0, sizeof(struct e1000_fw_version)); + /* basic eeprom version numbers and bits used vary by part and by tool + * used to create the nvm images. Check which data format we have. + */ + hw->nvm.ops.read(hw, NVM_ETRACK_HIWORD, 1, &etrack_test); switch (hw->mac.type) { case e1000_i211: igb_read_invm_version(hw, fw_vers); @@ -721,30 +726,30 @@ void igb_get_fw_version(struct e1000_hw *hw, struct e1000_fw_version *fw_vers) case e1000_82575: case e1000_82576: case e1000_82580: - case e1000_i354: - case e1000_i350: - case e1000_i210: + /* Use this format, unless EETRACK ID exists, + * then use alternate format + */ + if ((etrack_test & NVM_MAJOR_MASK) != NVM_ETRACK_VALID) { + hw->nvm.ops.read(hw, NVM_VERSION, 1, &fw_version); + fw_vers->eep_major = (fw_version & NVM_MAJOR_MASK) + >> NVM_MAJOR_SHIFT; + fw_vers->eep_minor = (fw_version & NVM_MINOR_MASK) + >> NVM_MINOR_SHIFT; + fw_vers->eep_build = (fw_version & NVM_IMAGE_ID_MASK); + goto etrack_id; + } break; - default: - return; - } - /* basic eeprom version numbers */ - hw->nvm.ops.read(hw, NVM_VERSION, 1, &fw_version); - fw_vers->eep_major = (fw_version & NVM_MAJOR_MASK) >> NVM_MAJOR_SHIFT; - fw_vers->eep_minor = (fw_version & NVM_MINOR_MASK); - - /* etrack id */ - hw->nvm.ops.read(hw, NVM_ETRACK_WORD, 1, &eeprom_verl); - hw->nvm.ops.read(hw, (NVM_ETRACK_WORD + 1), 1, &eeprom_verh); - fw_vers->etrack_id = (eeprom_verh << NVM_ETRACK_SHIFT) | eeprom_verl; - - switch (hw->mac.type) { case e1000_i210: - case e1000_i354: + if (!(igb_get_flash_presence_i210(hw))) { + igb_read_invm_version(hw, fw_vers); + return; + } + /* fall through */ case e1000_i350: /* find combo image version */ hw->nvm.ops.read(hw, NVM_COMB_VER_PTR, 1, &comb_offset); - if ((comb_offset != 0x0) && (comb_offset != NVM_VER_INVALID)) { + if ((comb_offset != 0x0) && + (comb_offset != NVM_VER_INVALID)) { hw->nvm.ops.read(hw, (NVM_COMB_VER_OFF + comb_offset + 1), 1, &comb_verh); @@ -760,15 +765,42 @@ void igb_get_fw_version(struct e1000_hw *hw, struct e1000_fw_version *fw_vers) fw_vers->or_major = comb_verl >> NVM_COMB_VER_SHFT; fw_vers->or_build = - ((comb_verl << NVM_COMB_VER_SHFT) - | (comb_verh >> NVM_COMB_VER_SHFT)); + (comb_verl << NVM_COMB_VER_SHFT) + | (comb_verh >> NVM_COMB_VER_SHFT); fw_vers->or_patch = comb_verh & NVM_COMB_VER_MASK; } } break; default: - break; + return; + } + hw->nvm.ops.read(hw, NVM_VERSION, 1, &fw_version); + fw_vers->eep_major = (fw_version & NVM_MAJOR_MASK) + >> NVM_MAJOR_SHIFT; + + /* check for old style version format in newer images*/ + if ((fw_version & NVM_NEW_DEC_MASK) == 0x0) { + eeprom_verl = (fw_version & NVM_COMB_VER_MASK); + } else { + eeprom_verl = (fw_version & NVM_MINOR_MASK) + >> NVM_MINOR_SHIFT; + } + /* Convert minor value to hex before assigning to output struct + * Val to be converted will not be higher than 99, per tool output + */ + q = eeprom_verl / NVM_HEX_CONV; + hval = q * NVM_HEX_TENS; + rem = eeprom_verl % NVM_HEX_CONV; + result = hval + rem; + fw_vers->eep_minor = result; + +etrack_id: + if ((etrack_test & NVM_MAJOR_MASK) == NVM_ETRACK_VALID) { + hw->nvm.ops.read(hw, NVM_ETRACK_WORD, 1, &eeprom_verl); + hw->nvm.ops.read(hw, (NVM_ETRACK_WORD + 1), 1, &eeprom_verh); + fw_vers->etrack_id = (eeprom_verh << NVM_ETRACK_SHIFT) + | eeprom_verl; } return; } diff --git a/drivers/net/ethernet/intel/igb/e1000_nvm.h b/drivers/net/ethernet/intel/igb/e1000_nvm.h index 6bfc0c43aace..433b7419cb98 100644 --- a/drivers/net/ethernet/intel/igb/e1000_nvm.h +++ b/drivers/net/ethernet/intel/igb/e1000_nvm.h @@ -44,6 +44,7 @@ struct e1000_fw_version { u32 etrack_id; u16 eep_major; u16 eep_minor; + u16 eep_build; u8 invm_major; u8 invm_minor; diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h index 15ea8dc9dad3..c1fae7aa0bd5 100644 --- a/drivers/net/ethernet/intel/igb/igb.h +++ b/drivers/net/ethernet/intel/igb/igb.h @@ -343,6 +343,8 @@ struct hwmon_buff { }; #endif +#define IGB_RETA_SIZE 128 + /* board specific private data structure */ struct igb_adapter { unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; @@ -444,6 +446,8 @@ struct igb_adapter { struct i2c_algo_bit_data i2c_algo; struct i2c_adapter i2c_adap; struct i2c_client *i2c_client; + u32 rss_indir_tbl_init; + u8 rss_indir_tbl[IGB_RETA_SIZE]; }; #define IGB_FLAG_HAS_MSI (1 << 0) @@ -480,6 +484,7 @@ extern int igb_up(struct igb_adapter *); extern void igb_down(struct igb_adapter *); extern void igb_reinit_locked(struct igb_adapter *); extern void igb_reset(struct igb_adapter *); +extern void igb_write_rss_indir_tbl(struct igb_adapter *); extern int igb_set_spd_dplx(struct igb_adapter *, u32, u8); extern int igb_setup_tx_resources(struct igb_ring *); extern int igb_setup_rx_resources(struct igb_ring *); diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c index 85fe7b52f435..ce9b5a9e480c 100644 --- a/drivers/net/ethernet/intel/igb/igb_ethtool.c +++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c @@ -1335,12 +1335,23 @@ static int igb_reg_test(struct igb_adapter *adapter, u64 *data) static int igb_eeprom_test(struct igb_adapter *adapter, u64 *data) { + struct e1000_hw *hw = &adapter->hw; + *data = 0; - /* Validate eeprom on all parts but i211 */ - if (adapter->hw.mac.type != e1000_i211) { + /* Validate eeprom on all parts but flashless */ + switch (hw->mac.type) { + case e1000_i210: + case e1000_i211: + if (igb_get_flash_presence_i210(hw)) { + if (adapter->hw.nvm.ops.validate(&adapter->hw) < 0) + *data = 2; + } + break; + default: if (adapter->hw.nvm.ops.validate(&adapter->hw) < 0) *data = 2; + break; } return *data; @@ -2672,7 +2683,9 @@ static int igb_set_eee(struct net_device *netdev, igb_set_eee_i350(hw); /* reset link */ - if (!netif_running(netdev)) + if (netif_running(netdev)) + igb_reinit_locked(adapter); + else igb_reset(adapter); } @@ -2771,6 +2784,90 @@ static void igb_ethtool_complete(struct net_device *netdev) pm_runtime_put(&adapter->pdev->dev); } +static u32 igb_get_rxfh_indir_size(struct net_device *netdev) +{ + return IGB_RETA_SIZE; +} + +static int igb_get_rxfh_indir(struct net_device *netdev, u32 *indir) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + int i; + + for (i = 0; i < IGB_RETA_SIZE; i++) + indir[i] = adapter->rss_indir_tbl[i]; + + return 0; +} + +void igb_write_rss_indir_tbl(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 reg = E1000_RETA(0); + u32 shift = 0; + int i = 0; + + switch (hw->mac.type) { + case e1000_82575: + shift = 6; + break; + case e1000_82576: + /* 82576 supports 2 RSS queues for SR-IOV */ + if (adapter->vfs_allocated_count) + shift = 3; + break; + default: + break; + } + + while (i < IGB_RETA_SIZE) { + u32 val = 0; + int j; + + for (j = 3; j >= 0; j--) { + val <<= 8; + val |= adapter->rss_indir_tbl[i + j]; + } + + wr32(reg, val << shift); + reg += 4; + i += 4; + } +} + +static int igb_set_rxfh_indir(struct net_device *netdev, const u32 *indir) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + int i; + u32 num_queues; + + num_queues = adapter->rss_queues; + + switch (hw->mac.type) { + case e1000_82576: + /* 82576 supports 2 RSS queues for SR-IOV */ + if (adapter->vfs_allocated_count) + num_queues = 2; + break; + default: + break; + } + + /* Verify user input. */ + for (i = 0; i < IGB_RETA_SIZE; i++) + if (indir[i] >= num_queues) + return -EINVAL; + + + for (i = 0; i < IGB_RETA_SIZE; i++) + adapter->rss_indir_tbl[i] = indir[i]; + + igb_write_rss_indir_tbl(adapter); + + return 0; +} + static const struct ethtool_ops igb_ethtool_ops = { .get_settings = igb_get_settings, .set_settings = igb_set_settings, @@ -2804,6 +2901,9 @@ static const struct ethtool_ops igb_ethtool_ops = { .set_eee = igb_set_eee, .get_module_info = igb_get_module_info, .get_module_eeprom = igb_get_module_eeprom, + .get_rxfh_indir_size = igb_get_rxfh_indir_size, + .get_rxfh_indir = igb_get_rxfh_indir, + .set_rxfh_indir = igb_set_rxfh_indir, .begin = igb_ethtool_begin, .complete = igb_ethtool_complete, }; diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index c1d72c03cb59..df33c4b8fa81 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -85,6 +85,8 @@ static DEFINE_PCI_DEVICE_TABLE(igb_pci_tbl) = { { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_FIBER), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_SERDES), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_SGMII), board_82575 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_COPPER_FLASHLESS), board_82575 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_SERDES_FLASHLESS), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_COPPER), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_FIBER), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_SERDES), board_82575 }, @@ -1013,7 +1015,7 @@ static void igb_free_q_vector(struct igb_adapter *adapter, int v_idx) adapter->q_vector[v_idx] = NULL; netif_napi_del(&q_vector->napi); - /* ixgbe_get_stats64() might access the rings on this vector, + /* igb_get_stats64() might access the rings on this vector, * we must wait a grace period before freeing it. */ kfree_rcu(q_vector, rcu); @@ -1929,12 +1931,17 @@ void igb_set_fw_version(struct igb_adapter *adapter) igb_get_fw_version(hw, &fw); switch (hw->mac.type) { + case e1000_i210: case e1000_i211: - snprintf(adapter->fw_version, sizeof(adapter->fw_version), - "%2d.%2d-%d", - fw.invm_major, fw.invm_minor, fw.invm_img_type); - break; - + if (!(igb_get_flash_presence_i210(hw))) { + snprintf(adapter->fw_version, + sizeof(adapter->fw_version), + "%2d.%2d-%d", + fw.invm_major, fw.invm_minor, + fw.invm_img_type); + break; + } + /* fall through */ default: /* if option is rom valid, display its version too */ if (fw.or_valid) { @@ -1944,11 +1951,16 @@ void igb_set_fw_version(struct igb_adapter *adapter) fw.eep_major, fw.eep_minor, fw.etrack_id, fw.or_major, fw.or_build, fw.or_patch); /* no option rom */ - } else { + } else if (fw.etrack_id != 0X0000) { snprintf(adapter->fw_version, - sizeof(adapter->fw_version), - "%d.%d, 0x%08x", - fw.eep_major, fw.eep_minor, fw.etrack_id); + sizeof(adapter->fw_version), + "%d.%d, 0x%08x", + fw.eep_major, fw.eep_minor, fw.etrack_id); + } else { + snprintf(adapter->fw_version, + sizeof(adapter->fw_version), + "%d.%d.%d", + fw.eep_major, fw.eep_minor, fw.eep_build); } break; } @@ -2166,15 +2178,28 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) */ hw->mac.ops.reset_hw(hw); - /* make sure the NVM is good , i211 parts have special NVM that - * doesn't contain a checksum + /* make sure the NVM is good , i211/i210 parts can have special NVM + * that doesn't contain a checksum */ - if (hw->mac.type != e1000_i211) { + switch (hw->mac.type) { + case e1000_i210: + case e1000_i211: + if (igb_get_flash_presence_i210(hw)) { + if (hw->nvm.ops.validate(hw) < 0) { + dev_err(&pdev->dev, + "The NVM Checksum Is Not Valid\n"); + err = -EIO; + goto err_eeprom; + } + } + break; + default: if (hw->nvm.ops.validate(hw) < 0) { dev_err(&pdev->dev, "The NVM Checksum Is Not Valid\n"); err = -EIO; goto err_eeprom; } + break; } /* copy the MAC address out of the NVM */ @@ -2436,6 +2461,11 @@ static int igb_enable_sriov(struct pci_dev *pdev, int num_vfs) int err = 0; int i; + if (!adapter->msix_entries) { + err = -EPERM; + goto out; + } + if (!num_vfs) goto out; else if (old_vfs && old_vfs == num_vfs) @@ -3096,7 +3126,7 @@ static void igb_setup_mrqc(struct igb_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; u32 mrqc, rxcsum; - u32 j, num_rx_queues, shift = 0; + u32 j, num_rx_queues; static const u32 rsskey[10] = { 0xDA565A6D, 0xC20E5B25, 0x3D256741, 0xB08FA343, 0xCB2BCAD0, 0xB4307BAE, 0xA32DCB77, 0x0CF23080, 0x3BB7426A, @@ -3109,35 +3139,21 @@ static void igb_setup_mrqc(struct igb_adapter *adapter) num_rx_queues = adapter->rss_queues; switch (hw->mac.type) { - case e1000_82575: - shift = 6; - break; case e1000_82576: /* 82576 supports 2 RSS queues for SR-IOV */ - if (adapter->vfs_allocated_count) { - shift = 3; + if (adapter->vfs_allocated_count) num_rx_queues = 2; - } break; default: break; } - /* Populate the indirection table 4 entries at a time. To do this - * we are generating the results for n and n+2 and then interleaving - * those with the results with n+1 and n+3. - */ - for (j = 0; j < 32; j++) { - /* first pass generates n and n+2 */ - u32 base = ((j * 0x00040004) + 0x00020000) * num_rx_queues; - u32 reta = (base & 0x07800780) >> (7 - shift); - - /* second pass generates n+1 and n+3 */ - base += 0x00010001 * num_rx_queues; - reta |= (base & 0x07800780) << (1 + shift); - - wr32(E1000_RETA(j), reta); + if (adapter->rss_indir_tbl_init != num_rx_queues) { + for (j = 0; j < IGB_RETA_SIZE; j++) + adapter->rss_indir_tbl[j] = (j * num_rx_queues) / IGB_RETA_SIZE; + adapter->rss_indir_tbl_init = num_rx_queues; } + igb_write_rss_indir_tbl(adapter); /* Disable raw packet checksumming so that RSS hash is placed in * descriptor on writeback. No need to enable TCP/UDP/IP checksum @@ -3844,7 +3860,6 @@ bool igb_has_link(struct igb_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; bool link_active = false; - s32 ret_val = 0; /* get_link_status is set on LSC (link status) interrupt or * rx sequence error interrupt. get_link_status will stay @@ -3853,16 +3868,11 @@ bool igb_has_link(struct igb_adapter *adapter) */ switch (hw->phy.media_type) { case e1000_media_type_copper: - if (hw->mac.get_link_status) { - ret_val = hw->mac.ops.check_for_link(hw); - link_active = !hw->mac.get_link_status; - } else { - link_active = true; - } - break; + if (!hw->mac.get_link_status) + return true; case e1000_media_type_internal_serdes: - ret_val = hw->mac.ops.check_for_link(hw); - link_active = hw->mac.serdes_has_link; + hw->mac.ops.check_for_link(hw); + link_active = !hw->mac.get_link_status; break; default: case e1000_media_type_unknown: @@ -4814,6 +4824,10 @@ static int igb_change_mtu(struct net_device *netdev, int new_mtu) return -EINVAL; } + /* adjust max frame to be at least the size of a standard frame */ + if (max_frame < (ETH_FRAME_LEN + ETH_FCS_LEN)) + max_frame = ETH_FRAME_LEN + ETH_FCS_LEN; + while (test_and_set_bit(__IGB_RESETTING, &adapter->state)) msleep(1); @@ -4865,6 +4879,8 @@ void igb_update_stats(struct igb_adapter *adapter, bytes = 0; packets = 0; + + rcu_read_lock(); for (i = 0; i < adapter->num_rx_queues; i++) { u32 rqdpc = rd32(E1000_RQDPC(i)); struct igb_ring *ring = adapter->rx_ring[i]; @@ -4900,6 +4916,7 @@ void igb_update_stats(struct igb_adapter *adapter, } net_stats->tx_bytes = bytes; net_stats->tx_packets = packets; + rcu_read_unlock(); /* read stats registers */ adapter->stats.crcerrs += rd32(E1000_CRCERRS); diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c index 7e8c477b0ab9..5a54e3dc535d 100644 --- a/drivers/net/ethernet/intel/igb/igb_ptp.c +++ b/drivers/net/ethernet/intel/igb/igb_ptp.c @@ -97,14 +97,14 @@ static cycle_t igb_ptp_read_82580(const struct cyclecounter *cc) { struct igb_adapter *igb = container_of(cc, struct igb_adapter, cc); struct e1000_hw *hw = &igb->hw; + u32 lo, hi; u64 val; - u32 lo, hi, jk; /* The timestamp latches on lowest register read. For the 82580 * the lowest register is SYSTIMR instead of SYSTIML. However we only * need to provide nanosecond resolution, so we just ignore it. */ - jk = rd32(E1000_SYSTIMR); + rd32(E1000_SYSTIMR); lo = rd32(E1000_SYSTIML); hi = rd32(E1000_SYSTIMH); @@ -118,13 +118,13 @@ static cycle_t igb_ptp_read_82580(const struct cyclecounter *cc) static void igb_ptp_read_i210(struct igb_adapter *adapter, struct timespec *ts) { struct e1000_hw *hw = &adapter->hw; - u32 sec, nsec, jk; + u32 sec, nsec; /* The timestamp latches on lowest register read. For I210/I211, the * lowest register is SYSTIMR. Since we only need to provide nanosecond * resolution, we can ignore it. */ - jk = rd32(E1000_SYSTIMR); + rd32(E1000_SYSTIMR); nsec = rd32(E1000_SYSTIML); sec = rd32(E1000_SYSTIMH); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index a6494e5daffe..0ac6b11c6e4e 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -618,9 +618,8 @@ struct ixgbe_adapter { #define IXGBE_FLAG2_FDIR_REQUIRES_REINIT (u32)(1 << 7) #define IXGBE_FLAG2_RSS_FIELD_IPV4_UDP (u32)(1 << 8) #define IXGBE_FLAG2_RSS_FIELD_IPV6_UDP (u32)(1 << 9) -#define IXGBE_FLAG2_PTP_ENABLED (u32)(1 << 10) -#define IXGBE_FLAG2_PTP_PPS_ENABLED (u32)(1 << 11) -#define IXGBE_FLAG2_BRIDGE_MODE_VEB (u32)(1 << 12) +#define IXGBE_FLAG2_PTP_PPS_ENABLED (u32)(1 << 10) +#define IXGBE_FLAG2_BRIDGE_MODE_VEB (u32)(1 << 11) /* Tx fast path data */ int num_tx_queues; @@ -754,7 +753,7 @@ enum ixgbe_state_t { __IXGBE_DOWN, __IXGBE_SERVICE_SCHED, __IXGBE_IN_SFP_INIT, - __IXGBE_READ_I2C, + __IXGBE_PTP_RUNNING, }; struct ixgbe_cb { diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c index 4a5bfb6b3af0..a26f3fee4f35 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c @@ -1018,8 +1018,17 @@ static s32 ixgbe_read_i2c_phy_82598(struct ixgbe_hw *hw, u8 dev_addr, u16 sfp_addr = 0; u16 sfp_data = 0; u16 sfp_stat = 0; + u16 gssr; u32 i; + if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) + gssr = IXGBE_GSSR_PHY1_SM; + else + gssr = IXGBE_GSSR_PHY0_SM; + + if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != 0) + return IXGBE_ERR_SWFW_SYNC; + if (hw->phy.type == ixgbe_phy_nl) { /* * phy SDA/SCL registers are at addresses 0xC30A to @@ -1028,17 +1037,17 @@ static s32 ixgbe_read_i2c_phy_82598(struct ixgbe_hw *hw, u8 dev_addr, */ sfp_addr = (dev_addr << 8) + byte_offset; sfp_addr = (sfp_addr | IXGBE_I2C_EEPROM_READ_MASK); - hw->phy.ops.write_reg(hw, - IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR, - MDIO_MMD_PMAPMD, - sfp_addr); + hw->phy.ops.write_reg_mdi(hw, + IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR, + MDIO_MMD_PMAPMD, + sfp_addr); /* Poll status */ for (i = 0; i < 100; i++) { - hw->phy.ops.read_reg(hw, - IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT, - MDIO_MMD_PMAPMD, - &sfp_stat); + hw->phy.ops.read_reg_mdi(hw, + IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT, + MDIO_MMD_PMAPMD, + &sfp_stat); sfp_stat = sfp_stat & IXGBE_I2C_EEPROM_STATUS_MASK; if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS) break; @@ -1052,8 +1061,8 @@ static s32 ixgbe_read_i2c_phy_82598(struct ixgbe_hw *hw, u8 dev_addr, } /* Read data */ - hw->phy.ops.read_reg(hw, IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA, - MDIO_MMD_PMAPMD, &sfp_data); + hw->phy.ops.read_reg_mdi(hw, IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA, + MDIO_MMD_PMAPMD, &sfp_data); *eeprom_data = (u8)(sfp_data >> 8); } else { @@ -1061,6 +1070,7 @@ static s32 ixgbe_read_i2c_phy_82598(struct ixgbe_hw *hw, u8 dev_addr, } out: + hw->mac.ops.release_swfw_sync(hw, gssr); return status; } @@ -1321,11 +1331,13 @@ static struct ixgbe_eeprom_operations eeprom_ops_82598 = { static struct ixgbe_phy_operations phy_ops_82598 = { .identify = &ixgbe_identify_phy_generic, - .identify_sfp = &ixgbe_identify_sfp_module_generic, + .identify_sfp = &ixgbe_identify_module_generic, .init = &ixgbe_init_phy_ops_82598, .reset = &ixgbe_reset_phy_generic, .read_reg = &ixgbe_read_phy_reg_generic, .write_reg = &ixgbe_write_phy_reg_generic, + .read_reg_mdi = &ixgbe_read_phy_reg_mdi, + .write_reg_mdi = &ixgbe_write_phy_reg_mdi, .setup_link = &ixgbe_setup_phy_link_generic, .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, .read_i2c_sff8472 = &ixgbe_read_i2c_sff8472_82598, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c index 0b82d38bc97d..207f68fbe3d3 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c @@ -58,6 +58,10 @@ static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, ixgbe_link_speed speed, bool autoneg_wait_to_complete); static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw); +static s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data); +static s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data); static bool ixgbe_mng_enabled(struct ixgbe_hw *hw) { @@ -219,6 +223,25 @@ static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw) struct ixgbe_mac_info *mac = &hw->mac; struct ixgbe_phy_info *phy = &hw->phy; s32 ret_val = 0; + u32 esdp; + + if (hw->device_id == IXGBE_DEV_ID_82599_QSFP_SF_QP) { + /* Store flag indicating I2C bus access control unit. */ + hw->phy.qsfp_shared_i2c_bus = true; + + /* Initialize access to QSFP+ I2C bus */ + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + esdp |= IXGBE_ESDP_SDP0_DIR; + esdp &= ~IXGBE_ESDP_SDP1_DIR; + esdp &= ~IXGBE_ESDP_SDP0; + esdp &= ~IXGBE_ESDP_SDP0_NATIVE; + esdp &= ~IXGBE_ESDP_SDP1_NATIVE; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); + + phy->ops.read_i2c_byte = &ixgbe_read_i2c_byte_82599; + phy->ops.write_i2c_byte = &ixgbe_write_i2c_byte_82599; + } /* Identify the PHY or SFP module */ ret_val = phy->ops.identify(hw); @@ -397,6 +420,9 @@ static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw) case IXGBE_DEV_ID_82599_LS: media_type = ixgbe_media_type_fiber_lco; break; + case IXGBE_DEV_ID_82599_QSFP_SF_QP: + media_type = ixgbe_media_type_fiber_qsfp; + break; default: media_type = ixgbe_media_type_unknown; break; @@ -527,6 +553,75 @@ static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) } /** + * ixgbe_set_fiber_fixed_speed - Set module link speed for fixed fiber + * @hw: pointer to hardware structure + * @speed: link speed to set + * + * We set the module speed differently for fixed fiber. For other + * multi-speed devices we don't have an error value so here if we + * detect an error we just log it and exit. + */ +static void ixgbe_set_fiber_fixed_speed(struct ixgbe_hw *hw, + ixgbe_link_speed speed) +{ + s32 status; + u8 rs, eeprom_data; + + switch (speed) { + case IXGBE_LINK_SPEED_10GB_FULL: + /* one bit mask same as setting on */ + rs = IXGBE_SFF_SOFT_RS_SELECT_10G; + break; + case IXGBE_LINK_SPEED_1GB_FULL: + rs = IXGBE_SFF_SOFT_RS_SELECT_1G; + break; + default: + hw_dbg(hw, "Invalid fixed module speed\n"); + return; + } + + /* Set RS0 */ + status = hw->phy.ops.read_i2c_byte(hw, IXGBE_SFF_SFF_8472_OSCB, + IXGBE_I2C_EEPROM_DEV_ADDR2, + &eeprom_data); + if (status) { + hw_dbg(hw, "Failed to read Rx Rate Select RS0\n"); + goto out; + } + + eeprom_data = (eeprom_data & ~IXGBE_SFF_SOFT_RS_SELECT_MASK) & rs; + + status = hw->phy.ops.write_i2c_byte(hw, IXGBE_SFF_SFF_8472_OSCB, + IXGBE_I2C_EEPROM_DEV_ADDR2, + eeprom_data); + if (status) { + hw_dbg(hw, "Failed to write Rx Rate Select RS0\n"); + goto out; + } + + /* Set RS1 */ + status = hw->phy.ops.read_i2c_byte(hw, IXGBE_SFF_SFF_8472_ESCB, + IXGBE_I2C_EEPROM_DEV_ADDR2, + &eeprom_data); + if (status) { + hw_dbg(hw, "Failed to read Rx Rate Select RS1\n"); + goto out; + } + + eeprom_data = (eeprom_data & ~IXGBE_SFF_SOFT_RS_SELECT_MASK) & rs; + + status = hw->phy.ops.write_i2c_byte(hw, IXGBE_SFF_SFF_8472_ESCB, + IXGBE_I2C_EEPROM_DEV_ADDR2, + eeprom_data); + if (status) { + hw_dbg(hw, "Failed to write Rx Rate Select RS1\n"); + goto out; + } +out: + return; +} + +/** * ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed * @hw: pointer to hardware structure * @speed: new link speed @@ -573,9 +668,14 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, goto out; /* Set the module link speed */ - esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5); - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); - IXGBE_WRITE_FLUSH(hw); + if (hw->phy.media_type == ixgbe_media_type_fiber_fixed) { + ixgbe_set_fiber_fixed_speed(hw, + IXGBE_LINK_SPEED_10GB_FULL); + } else { + esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5); + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + IXGBE_WRITE_FLUSH(hw); + } /* Allow module to change analog characteristics (1G->10G) */ msleep(40); @@ -625,10 +725,15 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, goto out; /* Set the module link speed */ - esdp_reg &= ~IXGBE_ESDP_SDP5; - esdp_reg |= IXGBE_ESDP_SDP5_DIR; - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); - IXGBE_WRITE_FLUSH(hw); + if (hw->phy.media_type == ixgbe_media_type_fiber_fixed) { + ixgbe_set_fiber_fixed_speed(hw, + IXGBE_LINK_SPEED_1GB_FULL); + } else { + esdp_reg &= ~IXGBE_ESDP_SDP5; + esdp_reg |= IXGBE_ESDP_SDP5_DIR; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + IXGBE_WRITE_FLUSH(hw); + } /* Allow module to change analog characteristics (10G->1G) */ msleep(40); @@ -1872,7 +1977,7 @@ static s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw) if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper) goto out; else - status = ixgbe_identify_sfp_module_generic(hw); + status = ixgbe_identify_module_generic(hw); } /* Set PHY type none if no PHY detected */ @@ -1978,10 +2083,12 @@ sfp_check: switch (hw->phy.type) { case ixgbe_phy_sfp_passive_tyco: case ixgbe_phy_sfp_passive_unknown: + case ixgbe_phy_qsfp_passive_unknown: physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; break; case ixgbe_phy_sfp_ftl_active: case ixgbe_phy_sfp_active_unknown: + case ixgbe_phy_qsfp_active_unknown: physical_layer = IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA; break; case ixgbe_phy_sfp_avago: @@ -1999,6 +2106,15 @@ sfp_check: else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE) physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T; break; + case ixgbe_phy_qsfp_intel: + case ixgbe_phy_qsfp_unknown: + hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_QSFP_10GBE_COMP, &comp_codes_10g); + if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; + else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; + break; default: break; } @@ -2236,6 +2352,112 @@ reset_pipeline_out: return ret_val; } +/** + * ixgbe_read_i2c_byte_82599 - Reads 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to read + * @data: value read + * + * Performs byte read operation to SFP module's EEPROM over I2C interface at + * a specified device address. + **/ +static s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data) +{ + u32 esdp; + s32 status; + s32 timeout = 200; + + if (hw->phy.qsfp_shared_i2c_bus == true) { + /* Acquire I2C bus ownership. */ + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + esdp |= IXGBE_ESDP_SDP0; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); + + while (timeout) { + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + if (esdp & IXGBE_ESDP_SDP1) + break; + + usleep_range(5000, 10000); + timeout--; + } + + if (!timeout) { + hw_dbg(hw, "Driver can't access resource, acquiring I2C bus timeout.\n"); + status = IXGBE_ERR_I2C; + goto release_i2c_access; + } + } + + status = ixgbe_read_i2c_byte_generic(hw, byte_offset, dev_addr, data); + +release_i2c_access: + if (hw->phy.qsfp_shared_i2c_bus == true) { + /* Release I2C bus ownership. */ + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + esdp &= ~IXGBE_ESDP_SDP0; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); + } + + return status; +} + +/** + * ixgbe_write_i2c_byte_82599 - Writes 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @data: value to write + * + * Performs byte write operation to SFP module's EEPROM over I2C interface at + * a specified device address. + **/ +static s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data) +{ + u32 esdp; + s32 status; + s32 timeout = 200; + + if (hw->phy.qsfp_shared_i2c_bus == true) { + /* Acquire I2C bus ownership. */ + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + esdp |= IXGBE_ESDP_SDP0; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); + + while (timeout) { + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + if (esdp & IXGBE_ESDP_SDP1) + break; + + usleep_range(5000, 10000); + timeout--; + } + + if (!timeout) { + hw_dbg(hw, "Driver can't access resource, acquiring I2C bus timeout.\n"); + status = IXGBE_ERR_I2C; + goto release_i2c_access; + } + } + + status = ixgbe_write_i2c_byte_generic(hw, byte_offset, dev_addr, data); + +release_i2c_access: + if (hw->phy.qsfp_shared_i2c_bus == true) { + /* Release I2C bus ownership. */ + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + esdp &= ~IXGBE_ESDP_SDP0; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); + } + + return status; +} + static struct ixgbe_mac_operations mac_ops_82599 = { .init_hw = &ixgbe_init_hw_generic, .reset_hw = &ixgbe_reset_hw_82599, @@ -2300,7 +2522,7 @@ static struct ixgbe_eeprom_operations eeprom_ops_82599 = { static struct ixgbe_phy_operations phy_ops_82599 = { .identify = &ixgbe_identify_phy_82599, - .identify_sfp = &ixgbe_identify_sfp_module_generic, + .identify_sfp = &ixgbe_identify_module_generic, .init = &ixgbe_init_phy_ops_82599, .reset = &ixgbe_reset_phy_generic, .read_reg = &ixgbe_read_phy_reg_generic, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c index 9bcdeb89af5a..50e62a2b1a65 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c @@ -65,17 +65,42 @@ static s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw); * function check the device id to see if the associated phy supports * autoneg flow control. **/ -s32 ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw) +bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw) { + bool supported = false; + ixgbe_link_speed speed; + bool link_up; - switch (hw->device_id) { - case IXGBE_DEV_ID_X540T: - case IXGBE_DEV_ID_X540T1: - case IXGBE_DEV_ID_82599_T3_LOM: - return 0; + switch (hw->phy.media_type) { + case ixgbe_media_type_fiber_fixed: + case ixgbe_media_type_fiber: + hw->mac.ops.check_link(hw, &speed, &link_up, false); + /* if link is down, assume supported */ + if (link_up) + supported = speed == IXGBE_LINK_SPEED_1GB_FULL ? + true : false; + else + supported = true; + break; + case ixgbe_media_type_backplane: + supported = true; + break; + case ixgbe_media_type_copper: + /* only some copper devices support flow control autoneg */ + switch (hw->device_id) { + case IXGBE_DEV_ID_82599_T3_LOM: + case IXGBE_DEV_ID_X540T: + case IXGBE_DEV_ID_X540T1: + supported = true; + break; + default: + break; + } default: - return IXGBE_ERR_FC_NOT_SUPPORTED; + break; } + + return supported; } /** @@ -114,6 +139,7 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw) * we link at 10G, the 1G advertisement is harmless and vice versa. */ switch (hw->phy.media_type) { + case ixgbe_media_type_fiber_fixed: case ixgbe_media_type_fiber: case ixgbe_media_type_backplane: reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA); @@ -234,7 +260,7 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw) IXGBE_GSSR_MAC_CSR_SM); } else if ((hw->phy.media_type == ixgbe_media_type_copper) && - (ixgbe_device_supports_autoneg_fc(hw) == 0)) { + ixgbe_device_supports_autoneg_fc(hw)) { hw->phy.ops.write_reg(hw, MDIO_AN_ADVERTISE, MDIO_MMD_AN, reg_cu); } @@ -2380,6 +2406,7 @@ void ixgbe_fc_autoneg(struct ixgbe_hw *hw) switch (hw->phy.media_type) { /* Autoneg flow control on fiber adapters */ + case ixgbe_media_type_fiber_fixed: case ixgbe_media_type_fiber: if (speed == IXGBE_LINK_SPEED_1GB_FULL) ret_val = ixgbe_fc_autoneg_fiber(hw); @@ -2392,7 +2419,7 @@ void ixgbe_fc_autoneg(struct ixgbe_hw *hw) /* Autoneg flow control on copper adapters */ case ixgbe_media_type_copper: - if (ixgbe_device_supports_autoneg_fc(hw) == 0) + if (ixgbe_device_supports_autoneg_fc(hw)) ret_val = ixgbe_fc_autoneg_copper(hw); break; @@ -2479,42 +2506,39 @@ out: **/ s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask) { - u32 gssr; + u32 gssr = 0; u32 swmask = mask; u32 fwmask = mask << 5; - s32 timeout = 200; + u32 timeout = 200; + u32 i; - while (timeout) { + for (i = 0; i < timeout; i++) { /* - * SW EEPROM semaphore bit is used for access to all - * SW_FW_SYNC/GSSR bits (not just EEPROM) + * SW NVM semaphore bit is used for access to all + * SW_FW_SYNC bits (not just NVM) */ if (ixgbe_get_eeprom_semaphore(hw)) return IXGBE_ERR_SWFW_SYNC; gssr = IXGBE_READ_REG(hw, IXGBE_GSSR); - if (!(gssr & (fwmask | swmask))) - break; - - /* - * Firmware currently using resource (fwmask) or other software - * thread currently using resource (swmask) - */ - ixgbe_release_eeprom_semaphore(hw); - usleep_range(5000, 10000); - timeout--; - } - - if (!timeout) { - hw_dbg(hw, "Driver can't access resource, SW_FW_SYNC timeout.\n"); - return IXGBE_ERR_SWFW_SYNC; + if (!(gssr & (fwmask | swmask))) { + gssr |= swmask; + IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr); + ixgbe_release_eeprom_semaphore(hw); + return 0; + } else { + /* Resource is currently in use by FW or SW */ + ixgbe_release_eeprom_semaphore(hw); + usleep_range(5000, 10000); + } } - gssr |= swmask; - IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr); + /* If time expired clear the bits holding the lock and retry */ + if (gssr & (fwmask | swmask)) + ixgbe_release_swfw_sync(hw, gssr & (fwmask | swmask)); - ixgbe_release_eeprom_semaphore(hw); - return 0; + usleep_range(5000, 10000); + return IXGBE_ERR_SWFW_SYNC; } /** diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h index 22eee38868f1..1315b8ac7f58 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h @@ -80,7 +80,7 @@ s32 ixgbe_disable_rx_buff_generic(struct ixgbe_hw *hw); s32 ixgbe_enable_rx_buff_generic(struct ixgbe_hw *hw); s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval); s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw); -s32 ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw); +bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw); void ixgbe_fc_autoneg(struct ixgbe_hw *hw); s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index 24e2e7aafda2..50c1e9b2fd80 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -355,10 +355,11 @@ static void ixgbe_get_pauseparam(struct net_device *netdev, struct ixgbe_adapter *adapter = netdev_priv(netdev); struct ixgbe_hw *hw = &adapter->hw; - if (hw->fc.disable_fc_autoneg) - pause->autoneg = 0; - else + if (ixgbe_device_supports_autoneg_fc(hw) && + !hw->fc.disable_fc_autoneg) pause->autoneg = 1; + else + pause->autoneg = 0; if (hw->fc.current_mode == ixgbe_fc_rx_pause) { pause->rx_pause = 1; @@ -384,7 +385,7 @@ static int ixgbe_set_pauseparam(struct net_device *netdev, /* some devices do not support autoneg of link flow control */ if ((pause->autoneg == AUTONEG_ENABLE) && - (ixgbe_device_supports_autoneg_fc(hw) != 0)) + !ixgbe_device_supports_autoneg_fc(hw)) return -EINVAL; fc.disable_fc_autoneg = (pause->autoneg != AUTONEG_ENABLE); @@ -1140,11 +1141,11 @@ static void ixgbe_get_strings(struct net_device *netdev, u32 stringset, sprintf(p, "tx_queue_%u_bytes", i); p += ETH_GSTRING_LEN; #ifdef LL_EXTENDED_STATS - sprintf(p, "tx_q_%u_napi_yield", i); + sprintf(p, "tx_queue_%u_ll_napi_yield", i); p += ETH_GSTRING_LEN; - sprintf(p, "tx_q_%u_misses", i); + sprintf(p, "tx_queue_%u_ll_misses", i); p += ETH_GSTRING_LEN; - sprintf(p, "tx_q_%u_cleaned", i); + sprintf(p, "tx_queue_%u_ll_cleaned", i); p += ETH_GSTRING_LEN; #endif /* LL_EXTENDED_STATS */ } @@ -1154,11 +1155,11 @@ static void ixgbe_get_strings(struct net_device *netdev, u32 stringset, sprintf(p, "rx_queue_%u_bytes", i); p += ETH_GSTRING_LEN; #ifdef LL_EXTENDED_STATS - sprintf(p, "rx_q_%u_ll_poll_yield", i); + sprintf(p, "rx_queue_%u_ll_poll_yield", i); p += ETH_GSTRING_LEN; - sprintf(p, "rx_q_%u_misses", i); + sprintf(p, "rx_queue_%u_ll_misses", i); p += ETH_GSTRING_LEN; - sprintf(p, "rx_q_%u_cleaned", i); + sprintf(p, "rx_queue_%u_ll_cleaned", i); p += ETH_GSTRING_LEN; #endif /* LL_EXTENDED_STATS */ } @@ -2909,33 +2910,21 @@ static int ixgbe_get_module_info(struct net_device *dev, struct ixgbe_hw *hw = &adapter->hw; u32 status; u8 sff8472_rev, addr_mode; - int ret_val = 0; bool page_swap = false; - /* avoid concurent i2c reads */ - while (test_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) - msleep(100); - - /* used by the service task */ - set_bit(__IXGBE_READ_I2C, &adapter->state); - /* Check whether we support SFF-8472 or not */ status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_SFF_8472_COMP, &sff8472_rev); - if (status != 0) { - ret_val = -EIO; - goto err_out; - } + if (status != 0) + return -EIO; /* addressing mode is not supported */ status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_SFF_8472_SWAP, &addr_mode); - if (status != 0) { - ret_val = -EIO; - goto err_out; - } + if (status != 0) + return -EIO; if (addr_mode & IXGBE_SFF_ADDRESSING_MODE) { e_err(drv, "Address change required to access page 0xA2, but not supported. Please report the module type to the driver maintainers.\n"); @@ -2952,9 +2941,7 @@ static int ixgbe_get_module_info(struct net_device *dev, modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN; } -err_out: - clear_bit(__IXGBE_READ_I2C, &adapter->state); - return ret_val; + return 0; } static int ixgbe_get_module_eeprom(struct net_device *dev, @@ -2968,48 +2955,25 @@ static int ixgbe_get_module_eeprom(struct net_device *dev, int i = 0; int ret_val = 0; - /* ixgbe_get_module_info is called before this function in all - * cases, so we do not need any checks we already do above, - * and can trust ee->len to be a known value. - */ + if (ee->len == 0) + return -EINVAL; + + for (i = ee->offset; i < ee->len; i++) { + /* I2C reads can take long time */ + if (test_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) + return -EBUSY; - while (test_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) - msleep(100); - set_bit(__IXGBE_READ_I2C, &adapter->state); + if (i < ETH_MODULE_SFF_8079_LEN) + status = hw->phy.ops.read_i2c_eeprom(hw, i, &databyte); + else + status = hw->phy.ops.read_i2c_sff8472(hw, i, &databyte); - /* Read the first block, SFF-8079 */ - for (i = 0; i < ETH_MODULE_SFF_8079_LEN; i++) { - status = hw->phy.ops.read_i2c_eeprom(hw, i, &databyte); - if (status != 0) { - /* Error occured while reading module */ + if (status != 0) ret_val = -EIO; - goto err_out; - } - data[i] = databyte; - } - /* If the second block is requested, check if SFF-8472 is supported. */ - if (ee->len == ETH_MODULE_SFF_8472_LEN) { - if (data[IXGBE_SFF_SFF_8472_COMP] == IXGBE_SFF_SFF_8472_UNSUP) - return -EOPNOTSUPP; - - /* Read the second block, SFF-8472 */ - for (i = ETH_MODULE_SFF_8079_LEN; - i < ETH_MODULE_SFF_8472_LEN; i++) { - status = hw->phy.ops.read_i2c_sff8472(hw, - i - ETH_MODULE_SFF_8079_LEN, &databyte); - if (status != 0) { - /* Error occured while reading module */ - ret_val = -EIO; - goto err_out; - } - data[i] = databyte; - } + data[i - ee->offset] = databyte; } -err_out: - clear_bit(__IXGBE_READ_I2C, &adapter->state); - return ret_val; } diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index be4b1fb3d0d2..128d6b885326 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -63,7 +63,7 @@ char ixgbe_default_device_descr[] = static char ixgbe_default_device_descr[] = "Intel(R) 10 Gigabit Network Connection"; #endif -#define DRV_VERSION "3.13.10-k" +#define DRV_VERSION "3.15.1-k" const char ixgbe_driver_version[] = DRV_VERSION; static const char ixgbe_copyright[] = "Copyright (c) 1999-2013 Intel Corporation."; @@ -109,6 +109,7 @@ static DEFINE_PCI_DEVICE_TABLE(ixgbe_pci_tbl) = { {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540T), board_X540 }, {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_SF2), board_82599 }, {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_LS), board_82599 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_QSFP_SF_QP), board_82599 }, {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599EN_SFP), board_82599 }, {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_SF_QP), board_82599 }, {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540T1), board_X540 }, @@ -195,6 +196,86 @@ static s32 ixgbe_get_parent_bus_info(struct ixgbe_adapter *adapter) return 0; } +/** + * ixgbe_check_from_parent - Determine whether PCIe info should come from parent + * @hw: hw specific details + * + * This function is used by probe to determine whether a device's PCI-Express + * bandwidth details should be gathered from the parent bus instead of from the + * device. Used to ensure that various locations all have the correct device ID + * checks. + */ +static inline bool ixgbe_pcie_from_parent(struct ixgbe_hw *hw) +{ + switch (hw->device_id) { + case IXGBE_DEV_ID_82599_SFP_SF_QP: + case IXGBE_DEV_ID_82599_QSFP_SF_QP: + return true; + default: + return false; + } +} + +static void ixgbe_check_minimum_link(struct ixgbe_adapter *adapter, + int expected_gts) +{ + int max_gts = 0; + enum pci_bus_speed speed = PCI_SPEED_UNKNOWN; + enum pcie_link_width width = PCIE_LNK_WIDTH_UNKNOWN; + struct pci_dev *pdev; + + /* determine whether to use the the parent device + */ + if (ixgbe_pcie_from_parent(&adapter->hw)) + pdev = adapter->pdev->bus->parent->self; + else + pdev = adapter->pdev; + + if (pcie_get_minimum_link(pdev, &speed, &width) || + speed == PCI_SPEED_UNKNOWN || width == PCIE_LNK_WIDTH_UNKNOWN) { + e_dev_warn("Unable to determine PCI Express bandwidth.\n"); + return; + } + + switch (speed) { + case PCIE_SPEED_2_5GT: + /* 8b/10b encoding reduces max throughput by 20% */ + max_gts = 2 * width; + break; + case PCIE_SPEED_5_0GT: + /* 8b/10b encoding reduces max throughput by 20% */ + max_gts = 4 * width; + break; + case PCIE_SPEED_8_0GT: + /* 128b/130b encoding only reduces throughput by 1% */ + max_gts = 8 * width; + break; + default: + e_dev_warn("Unable to determine PCI Express bandwidth.\n"); + return; + } + + e_dev_info("PCI Express bandwidth of %dGT/s available\n", + max_gts); + e_dev_info("(Speed:%s, Width: x%d, Encoding Loss:%s)\n", + (speed == PCIE_SPEED_8_0GT ? "8.0GT/s" : + speed == PCIE_SPEED_5_0GT ? "5.0GT/s" : + speed == PCIE_SPEED_2_5GT ? "2.5GT/s" : + "Unknown"), + width, + (speed == PCIE_SPEED_2_5GT ? "20%" : + speed == PCIE_SPEED_5_0GT ? "20%" : + speed == PCIE_SPEED_8_0GT ? "N/a" : + "Unknown")); + + if (max_gts < expected_gts) { + e_dev_warn("This is not sufficient for optimal performance of this card.\n"); + e_dev_warn("For optimal performance, at least %dGT/s of bandwidth is required.\n", + expected_gts); + e_dev_warn("A slot with more lanes and/or higher speed is suggested.\n"); + } +} + static void ixgbe_service_event_schedule(struct ixgbe_adapter *adapter) { if (!test_bit(__IXGBE_DOWN, &adapter->state) && @@ -3724,8 +3805,15 @@ void ixgbe_set_rx_mode(struct net_device *netdev) hw->addr_ctrl.user_set_promisc = true; fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE); vmolr |= (IXGBE_VMOLR_ROPE | IXGBE_VMOLR_MPE); - /* don't hardware filter vlans in promisc mode */ - ixgbe_vlan_filter_disable(adapter); + /* Only disable hardware filter vlans in promiscuous mode + * if SR-IOV and VMDQ are disabled - otherwise ensure + * that hardware VLAN filters remain enabled. + */ + if (!(adapter->flags & (IXGBE_FLAG_VMDQ_ENABLED | + IXGBE_FLAG_SRIOV_ENABLED))) + ixgbe_vlan_filter_disable(adapter); + else + ixgbe_vlan_filter_enable(adapter); } else { if (netdev->flags & IFF_ALLMULTI) { fctrl |= IXGBE_FCTRL_MPE; @@ -4352,7 +4440,7 @@ void ixgbe_reset(struct ixgbe_adapter *adapter) if (hw->mac.san_mac_rar_index) hw->mac.ops.set_vmdq_san_mac(hw, VMDQ_P(0)); - if (adapter->flags2 & IXGBE_FLAG2_PTP_ENABLED) + if (test_bit(__IXGBE_PTP_RUNNING, &adapter->state)) ixgbe_ptp_reset(adapter); } @@ -4714,8 +4802,7 @@ static int ixgbe_sw_init(struct ixgbe_adapter *adapter) ixgbe_pbthresh_setup(adapter); hw->fc.pause_time = IXGBE_DEFAULT_FCPAUSE; hw->fc.send_xon = true; - hw->fc.disable_fc_autoneg = - (ixgbe_device_supports_autoneg_fc(hw) == 0) ? false : true; + hw->fc.disable_fc_autoneg = ixgbe_device_supports_autoneg_fc(hw); #ifdef CONFIG_PCI_IOV /* assign number of SR-IOV VFs */ @@ -5681,7 +5768,7 @@ static void ixgbe_watchdog_link_is_up(struct ixgbe_adapter *adapter) adapter->last_rx_ptp_check = jiffies; - if (adapter->flags2 & IXGBE_FLAG2_PTP_ENABLED) + if (test_bit(__IXGBE_PTP_RUNNING, &adapter->state)) ixgbe_ptp_start_cyclecounter(adapter); e_info(drv, "NIC Link is Up %s, Flow Control: %s\n", @@ -5727,7 +5814,7 @@ static void ixgbe_watchdog_link_is_down(struct ixgbe_adapter *adapter) if (ixgbe_is_sfp(hw) && hw->mac.type == ixgbe_mac_82598EB) adapter->flags2 |= IXGBE_FLAG2_SEARCH_FOR_SFP; - if (adapter->flags2 & IXGBE_FLAG2_PTP_ENABLED) + if (test_bit(__IXGBE_PTP_RUNNING, &adapter->state)) ixgbe_ptp_start_cyclecounter(adapter); e_info(drv, "NIC Link is Down\n"); @@ -5826,10 +5913,6 @@ static void ixgbe_sfp_detection_subtask(struct ixgbe_adapter *adapter) !(adapter->flags2 & IXGBE_FLAG2_SFP_NEEDS_RESET)) return; - /* concurent i2c reads are not supported */ - if (test_bit(__IXGBE_READ_I2C, &adapter->state)) - return; - /* someone else is in init, wait until next service event */ if (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) return; @@ -6038,7 +6121,7 @@ static void ixgbe_service_task(struct work_struct *work) ixgbe_fdir_reinit_subtask(adapter); ixgbe_check_hang_subtask(adapter); - if (adapter->flags2 & IXGBE_FLAG2_PTP_ENABLED) { + if (test_bit(__IXGBE_PTP_RUNNING, &adapter->state)) { ixgbe_ptp_overflow_check(adapter); ixgbe_ptp_rx_hang(adapter); } @@ -7247,6 +7330,42 @@ static const struct net_device_ops ixgbe_netdev_ops = { }; /** + * ixgbe_enumerate_functions - Get the number of ports this device has + * @adapter: adapter structure + * + * This function enumerates the phsyical functions co-located on a single slot, + * in order to determine how many ports a device has. This is most useful in + * determining the required GT/s of PCIe bandwidth necessary for optimal + * performance. + **/ +static inline int ixgbe_enumerate_functions(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + struct list_head *entry; + int physfns = 0; + + /* Some cards can not use the generic count PCIe functions method, and + * so must be hardcoded to the correct value. + */ + switch (hw->device_id) { + case IXGBE_DEV_ID_82599_SFP_SF_QP: + case IXGBE_DEV_ID_82599_QSFP_SF_QP: + physfns = 4; + break; + default: + list_for_each(entry, &adapter->pdev->bus_list) { + struct pci_dev *pdev = + list_entry(entry, struct pci_dev, bus_list); + /* don't count virtual functions */ + if (!pdev->is_virtfn) + physfns++; + } + } + + return physfns; +} + +/** * ixgbe_wol_supported - Check whether device supports WoL * @hw: hw specific details * @device_id: the device ID @@ -7328,7 +7447,7 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent) struct ixgbe_hw *hw; const struct ixgbe_info *ii = ixgbe_info_tbl[ent->driver_data]; static int cards_found; - int i, err, pci_using_dac; + int i, err, pci_using_dac, expected_gts; unsigned int indices = MAX_TX_QUEUES; u8 part_str[IXGBE_PBANUM_LENGTH]; #ifdef IXGBE_FCOE @@ -7617,7 +7736,7 @@ skip_sriov: /* pick up the PCI bus settings for reporting later */ hw->mac.ops.get_bus_info(hw); - if (hw->device_id == IXGBE_DEV_ID_82599_SFP_SF_QP) + if (ixgbe_pcie_from_parent(hw)) ixgbe_get_parent_bus_info(adapter); /* print bus type/speed/width info */ @@ -7643,12 +7762,20 @@ skip_sriov: e_dev_info("MAC: %d, PHY: %d, PBA No: %s\n", hw->mac.type, hw->phy.type, part_str); - if (hw->bus.width <= ixgbe_bus_width_pcie_x4) { - e_dev_warn("PCI-Express bandwidth available for this card is " - "not sufficient for optimal performance.\n"); - e_dev_warn("For optimal performance a x8 PCI-Express slot " - "is required.\n"); + /* calculate the expected PCIe bandwidth required for optimal + * performance. Note that some older parts will never have enough + * bandwidth due to being older generation PCIe parts. We clamp these + * parts to ensure no warning is displayed if it can't be fixed. + */ + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + expected_gts = min(ixgbe_enumerate_functions(adapter) * 10, 16); + break; + default: + expected_gts = ixgbe_enumerate_functions(adapter) * 10; + break; } + ixgbe_check_minimum_link(adapter, expected_gts); /* reset the hardware with the new settings */ err = hw->mac.ops.start_hw(hw); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c index e5691ccbce9d..369eef526bc1 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c @@ -204,7 +204,83 @@ out: } /** + * ixgbe_read_phy_mdi - Reads a value from a specified PHY register without + * the SWFW lock + * @hw: pointer to hardware structure + * @reg_addr: 32 bit address of PHY register to read + * @phy_data: Pointer to read data from PHY register + **/ +s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, + u16 *phy_data) +{ + u32 i, data, command; + + /* Setup and write the address cycle command */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND)); + + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + + /* Check every 10 usec to see if the address cycle completed. + * The MDI Command bit will clear when the operation is + * complete + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + udelay(10); + + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) + break; + } + + + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { + hw_dbg(hw, "PHY address command did not complete.\n"); + return IXGBE_ERR_PHY; + } + + /* Address cycle complete, setup and write the read + * command + */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND)); + + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + + /* Check every 10 usec to see if the address cycle + * completed. The MDI Command bit will clear when the + * operation is complete + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + udelay(10); + + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) + break; + } + + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { + hw_dbg(hw, "PHY read command didn't complete\n"); + return IXGBE_ERR_PHY; + } + + /* Read operation is complete. Get the data + * from MSRWD + */ + data = IXGBE_READ_REG(hw, IXGBE_MSRWD); + data >>= IXGBE_MSRWD_READ_DATA_SHIFT; + *phy_data = (u16)(data); + + return 0; +} + +/** * ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register + * using the SWFW lock - this function is needed in most cases * @hw: pointer to hardware structure * @reg_addr: 32 bit address of PHY register to read * @phy_data: Pointer to read data from PHY register @@ -212,10 +288,7 @@ out: s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u16 *phy_data) { - u32 command; - u32 i; - u32 data; - s32 status = 0; + s32 status; u16 gssr; if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) @@ -223,86 +296,93 @@ s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, else gssr = IXGBE_GSSR_PHY0_SM; - if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != 0) + if (hw->mac.ops.acquire_swfw_sync(hw, gssr) == 0) { + status = ixgbe_read_phy_reg_mdi(hw, reg_addr, device_type, + phy_data); + hw->mac.ops.release_swfw_sync(hw, gssr); + } else { status = IXGBE_ERR_SWFW_SYNC; + } - if (status == 0) { - /* Setup and write the address cycle command */ - command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | - (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | - (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) | - (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND)); + return status; +} - IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); +/** + * ixgbe_write_phy_reg_mdi - Writes a value to specified PHY register + * without SWFW lock + * @hw: pointer to hardware structure + * @reg_addr: 32 bit PHY register to write + * @device_type: 5 bit device type + * @phy_data: Data to write to the PHY register + **/ +s32 ixgbe_write_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 phy_data) +{ + u32 i, command; - /* - * Check every 10 usec to see if the address cycle completed. - * The MDI Command bit will clear when the operation is - * complete - */ - for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { - udelay(10); + /* Put the data in the MDI single read and write data register*/ + IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data); - command = IXGBE_READ_REG(hw, IXGBE_MSCA); + /* Setup and write the address cycle command */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND)); - if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) - break; - } + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); - if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { - hw_dbg(hw, "PHY address command did not complete.\n"); - status = IXGBE_ERR_PHY; - } + /* + * Check every 10 usec to see if the address cycle completed. + * The MDI Command bit will clear when the operation is + * complete + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + udelay(10); - if (status == 0) { - /* - * Address cycle complete, setup and write the read - * command - */ - command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | - (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | - (hw->phy.mdio.prtad << - IXGBE_MSCA_PHY_ADDR_SHIFT) | - (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND)); - - IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); - - /* - * Check every 10 usec to see if the address cycle - * completed. The MDI Command bit will clear when the - * operation is complete - */ - for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { - udelay(10); - - command = IXGBE_READ_REG(hw, IXGBE_MSCA); - - if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) - break; - } + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) + break; + } - if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { - hw_dbg(hw, "PHY read command didn't complete\n"); - status = IXGBE_ERR_PHY; - } else { - /* - * Read operation is complete. Get the data - * from MSRWD - */ - data = IXGBE_READ_REG(hw, IXGBE_MSRWD); - data >>= IXGBE_MSRWD_READ_DATA_SHIFT; - *phy_data = (u16)(data); - } - } + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { + hw_dbg(hw, "PHY address cmd didn't complete\n"); + return IXGBE_ERR_PHY; + } - hw->mac.ops.release_swfw_sync(hw, gssr); + /* + * Address cycle complete, setup and write the write + * command + */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND)); + + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + + /* Check every 10 usec to see if the address cycle + * completed. The MDI Command bit will clear when the + * operation is complete + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + udelay(10); + + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) + break; } - return status; + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { + hw_dbg(hw, "PHY write cmd didn't complete\n"); + return IXGBE_ERR_PHY; + } + + return 0; } /** * ixgbe_write_phy_reg_generic - Writes a value to specified PHY register + * using SWFW lock- this function is needed in most cases * @hw: pointer to hardware structure * @reg_addr: 32 bit PHY register to write * @device_type: 5 bit device type @@ -311,9 +391,7 @@ s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u16 phy_data) { - u32 command; - u32 i; - s32 status = 0; + s32 status; u16 gssr; if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) @@ -321,74 +399,12 @@ s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, else gssr = IXGBE_GSSR_PHY0_SM; - if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != 0) - status = IXGBE_ERR_SWFW_SYNC; - - if (status == 0) { - /* Put the data in the MDI single read and write data register*/ - IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data); - - /* Setup and write the address cycle command */ - command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | - (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | - (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) | - (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND)); - - IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); - - /* - * Check every 10 usec to see if the address cycle completed. - * The MDI Command bit will clear when the operation is - * complete - */ - for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { - udelay(10); - - command = IXGBE_READ_REG(hw, IXGBE_MSCA); - - if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) - break; - } - - if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { - hw_dbg(hw, "PHY address cmd didn't complete\n"); - status = IXGBE_ERR_PHY; - } - - if (status == 0) { - /* - * Address cycle complete, setup and write the write - * command - */ - command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | - (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | - (hw->phy.mdio.prtad << - IXGBE_MSCA_PHY_ADDR_SHIFT) | - (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND)); - - IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); - - /* - * Check every 10 usec to see if the address cycle - * completed. The MDI Command bit will clear when the - * operation is complete - */ - for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { - udelay(10); - - command = IXGBE_READ_REG(hw, IXGBE_MSCA); - - if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) - break; - } - - if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { - hw_dbg(hw, "PHY address cmd didn't complete\n"); - status = IXGBE_ERR_PHY; - } - } - + if (hw->mac.ops.acquire_swfw_sync(hw, gssr) == 0) { + status = ixgbe_write_phy_reg_mdi(hw, reg_addr, device_type, + phy_data); hw->mac.ops.release_swfw_sync(hw, gssr); + } else { + status = IXGBE_ERR_SWFW_SYNC; } return status; @@ -825,9 +841,35 @@ out: } /** - * ixgbe_identify_sfp_module_generic - Identifies SFP modules + * ixgbe_identify_module_generic - Identifies module type * @hw: pointer to hardware structure * + * Determines HW type and calls appropriate function. + **/ +s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_ERR_SFP_NOT_PRESENT; + + switch (hw->mac.ops.get_media_type(hw)) { + case ixgbe_media_type_fiber: + status = ixgbe_identify_sfp_module_generic(hw); + break; + case ixgbe_media_type_fiber_qsfp: + status = ixgbe_identify_qsfp_module_generic(hw); + break; + default: + hw->phy.sfp_type = ixgbe_sfp_type_not_present; + status = IXGBE_ERR_SFP_NOT_PRESENT; + break; + } + + return status; +} + +/** + * ixgbe_identify_sfp_module_generic - Identifies SFP modules + * @hw: pointer to hardware structure +* * Searches for and identifies the SFP module and assigns appropriate PHY type. **/ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) @@ -1106,6 +1148,156 @@ err_read_i2c_eeprom: } /** + * ixgbe_identify_qsfp_module_generic - Identifies QSFP modules + * @hw: pointer to hardware structure + * + * Searches for and identifies the QSFP module and assigns appropriate PHY type + **/ +s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw) +{ + struct ixgbe_adapter *adapter = hw->back; + s32 status = IXGBE_ERR_PHY_ADDR_INVALID; + u32 vendor_oui = 0; + enum ixgbe_sfp_type stored_sfp_type = hw->phy.sfp_type; + u8 identifier = 0; + u8 comp_codes_1g = 0; + u8 comp_codes_10g = 0; + u8 oui_bytes[3] = {0, 0, 0}; + u16 enforce_sfp = 0; + + if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber_qsfp) { + hw->phy.sfp_type = ixgbe_sfp_type_not_present; + status = IXGBE_ERR_SFP_NOT_PRESENT; + goto out; + } + + status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER, + &identifier); + + if (status != 0) + goto err_read_i2c_eeprom; + + if (identifier != IXGBE_SFF_IDENTIFIER_QSFP_PLUS) { + hw->phy.type = ixgbe_phy_sfp_unsupported; + status = IXGBE_ERR_SFP_NOT_SUPPORTED; + goto out; + } + + hw->phy.id = identifier; + + /* LAN ID is needed for sfp_type determination */ + hw->mac.ops.set_lan_id(hw); + + status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_QSFP_10GBE_COMP, + &comp_codes_10g); + + if (status != 0) + goto err_read_i2c_eeprom; + + if (comp_codes_10g & IXGBE_SFF_QSFP_DA_PASSIVE_CABLE) { + hw->phy.type = ixgbe_phy_qsfp_passive_unknown; + if (hw->bus.lan_id == 0) + hw->phy.sfp_type = ixgbe_sfp_type_da_cu_core0; + else + hw->phy.sfp_type = ixgbe_sfp_type_da_cu_core1; + } else if (comp_codes_10g & IXGBE_SFF_QSFP_DA_ACTIVE_CABLE) { + hw->phy.type = ixgbe_phy_qsfp_active_unknown; + if (hw->bus.lan_id == 0) + hw->phy.sfp_type = ixgbe_sfp_type_da_act_lmt_core0; + else + hw->phy.sfp_type = ixgbe_sfp_type_da_act_lmt_core1; + } else if (comp_codes_10g & (IXGBE_SFF_10GBASESR_CAPABLE | + IXGBE_SFF_10GBASELR_CAPABLE)) { + if (hw->bus.lan_id == 0) + hw->phy.sfp_type = ixgbe_sfp_type_srlr_core0; + else + hw->phy.sfp_type = ixgbe_sfp_type_srlr_core1; + } else { + /* unsupported module type */ + hw->phy.type = ixgbe_phy_sfp_unsupported; + status = IXGBE_ERR_SFP_NOT_SUPPORTED; + goto out; + } + + if (hw->phy.sfp_type != stored_sfp_type) + hw->phy.sfp_setup_needed = true; + + /* Determine if the QSFP+ PHY is dual speed or not. */ + hw->phy.multispeed_fiber = false; + if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) && + (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) || + ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) && + (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE))) + hw->phy.multispeed_fiber = true; + + /* Determine PHY vendor for optical modules */ + if (comp_codes_10g & (IXGBE_SFF_10GBASESR_CAPABLE | + IXGBE_SFF_10GBASELR_CAPABLE)) { + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_QSFP_VENDOR_OUI_BYTE0, + &oui_bytes[0]); + + if (status != 0) + goto err_read_i2c_eeprom; + + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_QSFP_VENDOR_OUI_BYTE1, + &oui_bytes[1]); + + if (status != 0) + goto err_read_i2c_eeprom; + + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_QSFP_VENDOR_OUI_BYTE2, + &oui_bytes[2]); + + if (status != 0) + goto err_read_i2c_eeprom; + + vendor_oui = + ((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) | + (oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) | + (oui_bytes[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT)); + + if (vendor_oui == IXGBE_SFF_VENDOR_OUI_INTEL) + hw->phy.type = ixgbe_phy_qsfp_intel; + else + hw->phy.type = ixgbe_phy_qsfp_unknown; + + hw->mac.ops.get_device_caps(hw, &enforce_sfp); + if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP)) { + /* Make sure we're a supported PHY type */ + if (hw->phy.type == ixgbe_phy_qsfp_intel) { + status = 0; + } else { + if (hw->allow_unsupported_sfp == true) { + e_warn(hw, "WARNING: Intel (R) Network Connections are quality tested using Intel (R) Ethernet Optics. Using untested modules is not supported and may cause unstable operation or damage to the module or the adapter. Intel Corporation is not responsible for any harm caused by using untested modules.\n"); + status = 0; + } else { + hw_dbg(hw, + "QSFP module not supported\n"); + hw->phy.type = + ixgbe_phy_sfp_unsupported; + status = IXGBE_ERR_SFP_NOT_SUPPORTED; + } + } + } else { + status = 0; + } + } + +out: + return status; + +err_read_i2c_eeprom: + hw->phy.sfp_type = ixgbe_sfp_type_not_present; + hw->phy.id = 0; + hw->phy.type = ixgbe_phy_unknown; + + return IXGBE_ERR_SFP_NOT_PRESENT; +} + +/** * ixgbe_get_sfp_init_sequence_offsets - Provides offset of PHY init sequence * @hw: pointer to hardware structure * @list_offset: offset to the SFP ID list diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h index 886a3431cf5b..138dadd7cf33 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h @@ -33,17 +33,25 @@ #define IXGBE_I2C_EEPROM_DEV_ADDR2 0xA2 /* EEPROM byte offsets */ -#define IXGBE_SFF_IDENTIFIER 0x0 -#define IXGBE_SFF_IDENTIFIER_SFP 0x3 -#define IXGBE_SFF_VENDOR_OUI_BYTE0 0x25 -#define IXGBE_SFF_VENDOR_OUI_BYTE1 0x26 -#define IXGBE_SFF_VENDOR_OUI_BYTE2 0x27 -#define IXGBE_SFF_1GBE_COMP_CODES 0x6 -#define IXGBE_SFF_10GBE_COMP_CODES 0x3 -#define IXGBE_SFF_CABLE_TECHNOLOGY 0x8 -#define IXGBE_SFF_CABLE_SPEC_COMP 0x3C -#define IXGBE_SFF_SFF_8472_SWAP 0x5C -#define IXGBE_SFF_SFF_8472_COMP 0x5E +#define IXGBE_SFF_IDENTIFIER 0x0 +#define IXGBE_SFF_IDENTIFIER_SFP 0x3 +#define IXGBE_SFF_VENDOR_OUI_BYTE0 0x25 +#define IXGBE_SFF_VENDOR_OUI_BYTE1 0x26 +#define IXGBE_SFF_VENDOR_OUI_BYTE2 0x27 +#define IXGBE_SFF_1GBE_COMP_CODES 0x6 +#define IXGBE_SFF_10GBE_COMP_CODES 0x3 +#define IXGBE_SFF_CABLE_TECHNOLOGY 0x8 +#define IXGBE_SFF_CABLE_SPEC_COMP 0x3C +#define IXGBE_SFF_SFF_8472_SWAP 0x5C +#define IXGBE_SFF_SFF_8472_COMP 0x5E +#define IXGBE_SFF_SFF_8472_OSCB 0x6E +#define IXGBE_SFF_SFF_8472_ESCB 0x76 +#define IXGBE_SFF_IDENTIFIER_QSFP_PLUS 0xD +#define IXGBE_SFF_QSFP_VENDOR_OUI_BYTE0 0xA5 +#define IXGBE_SFF_QSFP_VENDOR_OUI_BYTE1 0xA6 +#define IXGBE_SFF_QSFP_VENDOR_OUI_BYTE2 0xA7 +#define IXGBE_SFF_QSFP_10GBE_COMP 0x83 +#define IXGBE_SFF_QSFP_1GBE_COMP 0x86 /* Bitmasks */ #define IXGBE_SFF_DA_PASSIVE_CABLE 0x4 @@ -54,7 +62,12 @@ #define IXGBE_SFF_1GBASET_CAPABLE 0x8 #define IXGBE_SFF_10GBASESR_CAPABLE 0x10 #define IXGBE_SFF_10GBASELR_CAPABLE 0x20 +#define IXGBE_SFF_SOFT_RS_SELECT_MASK 0x8 +#define IXGBE_SFF_SOFT_RS_SELECT_10G 0x8 +#define IXGBE_SFF_SOFT_RS_SELECT_1G 0x0 #define IXGBE_SFF_ADDRESSING_MODE 0x4 +#define IXGBE_SFF_QSFP_DA_ACTIVE_CABLE 0x1 +#define IXGBE_SFF_QSFP_DA_PASSIVE_CABLE 0x8 #define IXGBE_I2C_EEPROM_READ_MASK 0x100 #define IXGBE_I2C_EEPROM_STATUS_MASK 0x3 #define IXGBE_I2C_EEPROM_STATUS_NO_OPERATION 0x0 @@ -102,6 +115,10 @@ s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u16 *phy_data); s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u16 phy_data); +s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 *phy_data); +s32 ixgbe_write_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 phy_data); s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw); s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw, ixgbe_link_speed speed, @@ -121,7 +138,9 @@ s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw, u16 *firmware_version); s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw); +s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw); s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw); +s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw); s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, u16 *list_offset, u16 *data_offset); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c index 331987d6815c..5184e2a1a7d8 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c @@ -885,8 +885,8 @@ void ixgbe_ptp_init(struct ixgbe_adapter *adapter) ixgbe_ptp_reset(adapter); - /* set the flag that PTP has been enabled */ - adapter->flags2 |= IXGBE_FLAG2_PTP_ENABLED; + /* enter the IXGBE_PTP_RUNNING state */ + set_bit(__IXGBE_PTP_RUNNING, &adapter->state); return; } @@ -899,10 +899,12 @@ void ixgbe_ptp_init(struct ixgbe_adapter *adapter) */ void ixgbe_ptp_stop(struct ixgbe_adapter *adapter) { - /* stop the overflow check task */ - adapter->flags2 &= ~(IXGBE_FLAG2_PTP_ENABLED | - IXGBE_FLAG2_PTP_PPS_ENABLED); + /* Leave the IXGBE_PTP_RUNNING state. */ + if (!test_and_clear_bit(__IXGBE_PTP_RUNNING, &adapter->state)) + return; + /* stop the PPS signal */ + adapter->flags2 &= ~IXGBE_FLAG2_PTP_PPS_ENABLED; ixgbe_ptp_setup_sdp(adapter); cancel_work_sync(&adapter->ptp_tx_work); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c index 1e7d587c4e57..73c8e73bb6e7 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c @@ -173,39 +173,6 @@ void ixgbe_enable_sriov(struct ixgbe_adapter *adapter) ixgbe_disable_sriov(adapter); } -static bool ixgbe_vfs_are_assigned(struct ixgbe_adapter *adapter) -{ - struct pci_dev *pdev = adapter->pdev; - struct pci_dev *vfdev; - int dev_id; - - switch (adapter->hw.mac.type) { - case ixgbe_mac_82599EB: - dev_id = IXGBE_DEV_ID_82599_VF; - break; - case ixgbe_mac_X540: - dev_id = IXGBE_DEV_ID_X540_VF; - break; - default: - return false; - } - - /* loop through all the VFs to see if we own any that are assigned */ - vfdev = pci_get_device(PCI_VENDOR_ID_INTEL, dev_id, NULL); - while (vfdev) { - /* if we don't own it we don't care */ - if (vfdev->is_virtfn && vfdev->physfn == pdev) { - /* if it is assigned we cannot release it */ - if (vfdev->dev_flags & PCI_DEV_FLAGS_ASSIGNED) - return true; - } - - vfdev = pci_get_device(PCI_VENDOR_ID_INTEL, dev_id, vfdev); - } - - return false; -} - #endif /* #ifdef CONFIG_PCI_IOV */ int ixgbe_disable_sriov(struct ixgbe_adapter *adapter) { @@ -235,7 +202,7 @@ int ixgbe_disable_sriov(struct ixgbe_adapter *adapter) * without causing issues, so just leave the hardware * available but disabled */ - if (ixgbe_vfs_are_assigned(adapter)) { + if (pci_vfs_assigned(adapter->pdev)) { e_dev_warn("Unloading driver while VFs are assigned - VFs will not be deallocated\n"); return -EPERM; } @@ -768,6 +735,29 @@ static int ixgbe_set_vf_mac_addr(struct ixgbe_adapter *adapter, return ixgbe_set_vf_mac(adapter, vf, new_mac) < 0; } +static int ixgbe_find_vlvf_entry(struct ixgbe_hw *hw, u32 vlan) +{ + u32 vlvf; + s32 regindex; + + /* short cut the special case */ + if (vlan == 0) + return 0; + + /* Search for the vlan id in the VLVF entries */ + for (regindex = 1; regindex < IXGBE_VLVF_ENTRIES; regindex++) { + vlvf = IXGBE_READ_REG(hw, IXGBE_VLVF(regindex)); + if ((vlvf & VLAN_VID_MASK) == vlan) + break; + } + + /* Return a negative value if not found */ + if (regindex >= IXGBE_VLVF_ENTRIES) + regindex = -1; + + return regindex; +} + static int ixgbe_set_vf_vlan_msg(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf) { @@ -775,6 +765,9 @@ static int ixgbe_set_vf_vlan_msg(struct ixgbe_adapter *adapter, int add = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK) >> IXGBE_VT_MSGINFO_SHIFT; int vid = (msgbuf[1] & IXGBE_VLVF_VLANID_MASK); int err; + s32 reg_ndx; + u32 vlvf; + u32 bits; u8 tcs = netdev_get_num_tc(adapter->netdev); if (adapter->vfinfo[vf].pf_vlan || tcs) { @@ -790,10 +783,50 @@ static int ixgbe_set_vf_vlan_msg(struct ixgbe_adapter *adapter, else if (adapter->vfinfo[vf].vlan_count) adapter->vfinfo[vf].vlan_count--; + /* in case of promiscuous mode any VLAN filter set for a VF must + * also have the PF pool added to it. + */ + if (add && adapter->netdev->flags & IFF_PROMISC) + err = ixgbe_set_vf_vlan(adapter, add, vid, VMDQ_P(0)); + err = ixgbe_set_vf_vlan(adapter, add, vid, vf); if (!err && adapter->vfinfo[vf].spoofchk_enabled) hw->mac.ops.set_vlan_anti_spoofing(hw, true, vf); + /* Go through all the checks to see if the VLAN filter should + * be wiped completely. + */ + if (!add && adapter->netdev->flags & IFF_PROMISC) { + reg_ndx = ixgbe_find_vlvf_entry(hw, vid); + if (reg_ndx < 0) + goto out; + vlvf = IXGBE_READ_REG(hw, IXGBE_VLVF(reg_ndx)); + /* See if any other pools are set for this VLAN filter + * entry other than the PF. + */ + if (VMDQ_P(0) < 32) { + bits = IXGBE_READ_REG(hw, IXGBE_VLVFB(reg_ndx * 2)); + bits &= ~(1 << VMDQ_P(0)); + bits |= IXGBE_READ_REG(hw, + IXGBE_VLVFB(reg_ndx * 2) + 1); + } else { + bits = IXGBE_READ_REG(hw, + IXGBE_VLVFB(reg_ndx * 2) + 1); + bits &= ~(1 << (VMDQ_P(0) - 32)); + bits |= IXGBE_READ_REG(hw, IXGBE_VLVFB(reg_ndx * 2)); + } + + /* If the filter was removed then ensure PF pool bit + * is cleared if the PF only added itself to the pool + * because the PF is in promiscuous mode. + */ + if ((vlvf & VLAN_VID_MASK) == vid && + !test_bit(vid, adapter->active_vlans) && !bits) + ixgbe_set_vf_vlan(adapter, add, vid, VMDQ_P(0)); + } + +out: + return err; } diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h index 70c6aa3d3f95..161ff18be775 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h @@ -69,6 +69,7 @@ #define IXGBE_DEV_ID_82599_LS 0x154F #define IXGBE_DEV_ID_X540T 0x1528 #define IXGBE_DEV_ID_82599_SFP_SF_QP 0x154A +#define IXGBE_DEV_ID_82599_QSFP_SF_QP 0x1558 #define IXGBE_DEV_ID_X540T1 0x1560 /* VF Device IDs */ @@ -1520,9 +1521,11 @@ enum { #define IXGBE_ESDP_SDP5 0x00000020 /* SDP5 Data Value */ #define IXGBE_ESDP_SDP6 0x00000040 /* SDP6 Data Value */ #define IXGBE_ESDP_SDP0_DIR 0x00000100 /* SDP0 IO direction */ +#define IXGBE_ESDP_SDP1_DIR 0x00000200 /* SDP1 IO direction */ #define IXGBE_ESDP_SDP4_DIR 0x00000004 /* SDP4 IO direction */ #define IXGBE_ESDP_SDP5_DIR 0x00002000 /* SDP5 IO direction */ #define IXGBE_ESDP_SDP0_NATIVE 0x00010000 /* SDP0 Native Function */ +#define IXGBE_ESDP_SDP1_NATIVE 0x00020000 /* SDP1 IO mode */ /* LEDCTL Bit Masks */ #define IXGBE_LED_IVRT_BASE 0x00000040 @@ -2582,6 +2585,10 @@ enum ixgbe_phy_type { ixgbe_phy_sfp_ftl_active, ixgbe_phy_sfp_unknown, ixgbe_phy_sfp_intel, + ixgbe_phy_qsfp_passive_unknown, + ixgbe_phy_qsfp_active_unknown, + ixgbe_phy_qsfp_intel, + ixgbe_phy_qsfp_unknown, ixgbe_phy_sfp_unsupported, ixgbe_phy_generic }; @@ -2622,6 +2629,8 @@ enum ixgbe_sfp_type { enum ixgbe_media_type { ixgbe_media_type_unknown = 0, ixgbe_media_type_fiber, + ixgbe_media_type_fiber_fixed, + ixgbe_media_type_fiber_qsfp, ixgbe_media_type_fiber_lco, ixgbe_media_type_copper, ixgbe_media_type_backplane, @@ -2885,6 +2894,8 @@ struct ixgbe_phy_operations { s32 (*reset)(struct ixgbe_hw *); s32 (*read_reg)(struct ixgbe_hw *, u32, u32, u16 *); s32 (*write_reg)(struct ixgbe_hw *, u32, u32, u16); + s32 (*read_reg_mdi)(struct ixgbe_hw *, u32, u32, u16 *); + s32 (*write_reg_mdi)(struct ixgbe_hw *, u32, u32, u16); s32 (*setup_link)(struct ixgbe_hw *); s32 (*setup_link_speed)(struct ixgbe_hw *, ixgbe_link_speed, bool); s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *); @@ -2953,6 +2964,7 @@ struct ixgbe_phy_info { bool smart_speed_active; bool multispeed_fiber; bool reset_if_overtemp; + bool qsfp_shared_i2c_bus; }; #include "ixgbe_mbx.h" |