diff options
Diffstat (limited to 'drivers/net/ethernet/marvell/octeon_ep/octep_config.h')
| -rw-r--r-- | drivers/net/ethernet/marvell/octeon_ep/octep_config.h | 204 |
1 files changed, 204 insertions, 0 deletions
diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_config.h b/drivers/net/ethernet/marvell/octeon_ep/octep_config.h new file mode 100644 index 000000000000..f208f3f9a447 --- /dev/null +++ b/drivers/net/ethernet/marvell/octeon_ep/octep_config.h @@ -0,0 +1,204 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Marvell Octeon EP (EndPoint) Ethernet Driver + * + * Copyright (C) 2020 Marvell. + * + */ + +#ifndef _OCTEP_CONFIG_H_ +#define _OCTEP_CONFIG_H_ + +/* Tx instruction types by length */ +#define OCTEP_32BYTE_INSTR 32 +#define OCTEP_64BYTE_INSTR 64 + +/* Tx Queue: maximum descriptors per ring */ +#define OCTEP_IQ_MAX_DESCRIPTORS 1024 +/* Minimum input (Tx) requests to be enqueued to ring doorbell */ +#define OCTEP_DB_MIN 1 +/* Packet threshold for Tx queue interrupt */ +#define OCTEP_IQ_INTR_THRESHOLD 0x0 + +/* Rx Queue: maximum descriptors per ring */ +#define OCTEP_OQ_MAX_DESCRIPTORS 1024 + +/* Rx buffer size: Use page size buffers. + * Build skb from allocated page buffer once the packet is received. + * When a gathered packet is received, make head page as skb head and + * page buffers in consecutive Rx descriptors as fragments. + */ +#define OCTEP_OQ_BUF_SIZE (SKB_WITH_OVERHEAD(PAGE_SIZE)) +#define OCTEP_OQ_PKTS_PER_INTR 128 +#define OCTEP_OQ_REFILL_THRESHOLD (OCTEP_OQ_MAX_DESCRIPTORS / 4) + +#define OCTEP_OQ_INTR_PKT_THRESHOLD 1 +#define OCTEP_OQ_INTR_TIME_THRESHOLD 10 + +#define OCTEP_MSIX_NAME_SIZE (IFNAMSIZ + 32) + +/* Tx Queue wake threshold + * wakeup a stopped Tx queue if minimum 2 descriptors are available. + * Even a skb with fragments consume only one Tx queue descriptor entry. + */ +#define OCTEP_WAKE_QUEUE_THRESHOLD 2 + +/* Minimum MTU supported by Octeon network interface */ +#define OCTEP_MIN_MTU ETH_MIN_MTU +/* Maximum MTU supported by Octeon interface*/ +#define OCTEP_MAX_MTU (10000 - (ETH_HLEN + ETH_FCS_LEN)) +/* Default MTU */ +#define OCTEP_DEFAULT_MTU 1500 + +/* Macros to get octeon config params */ +#define CFG_GET_IQ_CFG(cfg) ((cfg)->iq) +#define CFG_GET_IQ_NUM_DESC(cfg) ((cfg)->iq.num_descs) +#define CFG_GET_IQ_INSTR_TYPE(cfg) ((cfg)->iq.instr_type) +#define CFG_GET_IQ_PKIND(cfg) ((cfg)->iq.pkind) +#define CFG_GET_IQ_INSTR_SIZE(cfg) (64) +#define CFG_GET_IQ_DB_MIN(cfg) ((cfg)->iq.db_min) +#define CFG_GET_IQ_INTR_THRESHOLD(cfg) ((cfg)->iq.intr_threshold) + +#define CFG_GET_OQ_NUM_DESC(cfg) ((cfg)->oq.num_descs) +#define CFG_GET_OQ_BUF_SIZE(cfg) ((cfg)->oq.buf_size) +#define CFG_GET_OQ_REFILL_THRESHOLD(cfg) ((cfg)->oq.refill_threshold) +#define CFG_GET_OQ_INTR_PKT(cfg) ((cfg)->oq.oq_intr_pkt) +#define CFG_GET_OQ_INTR_TIME(cfg) ((cfg)->oq.oq_intr_time) + +#define CFG_GET_PORTS_MAX_IO_RINGS(cfg) ((cfg)->pf_ring_cfg.max_io_rings) +#define CFG_GET_PORTS_ACTIVE_IO_RINGS(cfg) ((cfg)->pf_ring_cfg.active_io_rings) +#define CFG_GET_PORTS_PF_SRN(cfg) ((cfg)->pf_ring_cfg.srn) + +#define CFG_GET_DPI_PKIND(cfg) ((cfg)->core_cfg.dpi_pkind) +#define CFG_GET_CORE_TICS_PER_US(cfg) ((cfg)->core_cfg.core_tics_per_us) +#define CFG_GET_COPROC_TICS_PER_US(cfg) ((cfg)->core_cfg.coproc_tics_per_us) + +#define CFG_GET_MAX_VFS(cfg) ((cfg)->sriov_cfg.max_vfs) +#define CFG_GET_ACTIVE_VFS(cfg) ((cfg)->sriov_cfg.active_vfs) +#define CFG_GET_MAX_RPVF(cfg) ((cfg)->sriov_cfg.max_rings_per_vf) +#define CFG_GET_ACTIVE_RPVF(cfg) ((cfg)->sriov_cfg.active_rings_per_vf) +#define CFG_GET_VF_SRN(cfg) ((cfg)->sriov_cfg.vf_srn) + +#define CFG_GET_IOQ_MSIX(cfg) ((cfg)->msix_cfg.ioq_msix) +#define CFG_GET_NON_IOQ_MSIX(cfg) ((cfg)->msix_cfg.non_ioq_msix) +#define CFG_GET_NON_IOQ_MSIX_NAMES(cfg) ((cfg)->msix_cfg.non_ioq_msix_names) + +#define CFG_GET_CTRL_MBOX_MEM_ADDR(cfg) ((cfg)->ctrl_mbox_cfg.barmem_addr) + +/* Hardware Tx Queue configuration. */ +struct octep_iq_config { + /* Size of the Input queue (number of commands) */ + u16 num_descs; + + /* Command size - 32 or 64 bytes */ + u16 instr_type; + + /* pkind for packets sent to Octeon */ + u16 pkind; + + /* Minimum number of commands pending to be posted to Octeon before driver + * hits the Input queue doorbell. + */ + u16 db_min; + + /* Trigger the IQ interrupt when processed cmd count reaches + * this level. + */ + u32 intr_threshold; +}; + +/* Hardware Rx Queue configuration. */ +struct octep_oq_config { + /* Size of Output queue (number of descriptors) */ + u16 num_descs; + + /* Size of buffer in this Output queue. */ + u16 buf_size; + + /* The number of buffers that were consumed during packet processing + * by the driver on this Output queue before the driver attempts to + * replenish the descriptor ring with new buffers. + */ + u16 refill_threshold; + + /* Interrupt Coalescing (Packet Count). Octeon will interrupt the host + * only if it sent as many packets as specified by this field. + * The driver usually does not use packet count interrupt coalescing. + */ + u32 oq_intr_pkt; + + /* Interrupt Coalescing (Time Interval). Octeon will interrupt the host + * if at least one packet was sent in the time interval specified by + * this field. The driver uses time interval interrupt coalescing by + * default. The time is specified in microseconds. + */ + u32 oq_intr_time; +}; + +/* Tx/Rx configuration */ +struct octep_pf_ring_config { + /* Max number of IOQs */ + u16 max_io_rings; + + /* Number of active IOQs */ + u16 active_io_rings; + + /* Starting IOQ number: this changes based on which PEM is used */ + u16 srn; +}; + +/* Octeon Hardware SRIOV config */ +struct octep_sriov_config { + /* Max number of VF devices supported */ + u16 max_vfs; + + /* Number of VF devices enabled */ + u16 active_vfs; + + /* Max number of rings assigned to VF */ + u8 max_rings_per_vf; + + /* Number of rings enabled per VF */ + u8 active_rings_per_vf; + + /* starting ring number of VF's: ring-0 of VF-0 of the PF */ + u16 vf_srn; +}; + +/* Octeon MSI-x config. */ +struct octep_msix_config { + /* Number of IOQ interrupts */ + u16 ioq_msix; + + /* Number of Non IOQ interrupts */ + u16 non_ioq_msix; + + /* Names of Non IOQ interrupts */ + char **non_ioq_msix_names; +}; + +struct octep_ctrl_mbox_config { + /* Barmem address for control mbox */ + void __iomem *barmem_addr; +}; + +/* Data Structure to hold configuration limits and active config */ +struct octep_config { + /* Input Queue attributes. */ + struct octep_iq_config iq; + + /* Output Queue attributes. */ + struct octep_oq_config oq; + + /* NIC Port Configuration */ + struct octep_pf_ring_config pf_ring_cfg; + + /* SRIOV configuration of the PF */ + struct octep_sriov_config sriov_cfg; + + /* MSI-X interrupt config */ + struct octep_msix_config msix_cfg; + + /* ctrl mbox config */ + struct octep_ctrl_mbox_config ctrl_mbox_cfg; +}; +#endif /* _OCTEP_CONFIG_H_ */ |