diff options
Diffstat (limited to 'drivers/net/ethernet/marvell/octeontx2/af/ptp.c')
-rw-r--r-- | drivers/net/ethernet/marvell/octeontx2/af/ptp.c | 133 |
1 files changed, 82 insertions, 51 deletions
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/ptp.c b/drivers/net/ethernet/marvell/octeontx2/af/ptp.c index 9b8e59f4c206..d6321de3cc17 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/ptp.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/ptp.c @@ -27,54 +27,29 @@ #define PCI_DEVID_CN10K_PTP 0xA09E #define PCI_PTP_BAR_NO 0 -#define PCI_RST_BAR_NO 0 #define PTP_CLOCK_CFG 0xF00ULL #define PTP_CLOCK_CFG_PTP_EN BIT_ULL(0) +#define PTP_CLOCK_CFG_EXT_CLK_EN BIT_ULL(1) +#define PTP_CLOCK_CFG_EXT_CLK_IN_MASK GENMASK_ULL(7, 2) +#define PTP_CLOCK_CFG_TSTMP_EDGE BIT_ULL(9) +#define PTP_CLOCK_CFG_TSTMP_EN BIT_ULL(8) +#define PTP_CLOCK_CFG_TSTMP_IN_MASK GENMASK_ULL(15, 10) +#define PTP_CLOCK_CFG_PPS_EN BIT_ULL(30) +#define PTP_CLOCK_CFG_PPS_INV BIT_ULL(31) + +#define PTP_PPS_HI_INCR 0xF60ULL +#define PTP_PPS_LO_INCR 0xF68ULL +#define PTP_PPS_THRESH_HI 0xF58ULL + #define PTP_CLOCK_LO 0xF08ULL #define PTP_CLOCK_HI 0xF10ULL #define PTP_CLOCK_COMP 0xF18ULL - -#define RST_BOOT 0x1600ULL -#define RST_MUL_BITS GENMASK_ULL(38, 33) -#define CLOCK_BASE_RATE 50000000ULL +#define PTP_TIMESTAMP 0xF20ULL static struct ptp *first_ptp_block; static const struct pci_device_id ptp_id_table[]; -static u64 get_clock_rate(void) -{ - u64 cfg, ret = CLOCK_BASE_RATE * 16; - struct pci_dev *pdev; - void __iomem *base; - - /* To get the input clock frequency with which PTP co-processor - * block is running the base frequency(50 MHz) needs to be multiplied - * with multiplier bits present in RST_BOOT register of RESET block. - * Hence below code gets the multiplier bits from the RESET PCI - * device present in the system. - */ - pdev = pci_get_device(PCI_VENDOR_ID_CAVIUM, - PCI_DEVID_OCTEONTX2_RST, NULL); - if (!pdev) - goto error; - - base = pci_ioremap_bar(pdev, PCI_RST_BAR_NO); - if (!base) - goto error_put_pdev; - - cfg = readq(base + RST_BOOT); - ret = CLOCK_BASE_RATE * FIELD_GET(RST_MUL_BITS, cfg); - - iounmap(base); - -error_put_pdev: - pci_dev_put(pdev); - -error: - return ret; -} - struct ptp *ptp_get(void) { struct ptp *ptp = first_ptp_block; @@ -145,13 +120,74 @@ static int ptp_get_clock(struct ptp *ptp, u64 *clk) return 0; } +void ptp_start(struct ptp *ptp, u64 sclk, u32 ext_clk_freq, u32 extts) +{ + struct pci_dev *pdev; + u64 clock_comp; + u64 clock_cfg; + + if (!ptp) + return; + + pdev = ptp->pdev; + + if (!sclk) { + dev_err(&pdev->dev, "PTP input clock cannot be zero\n"); + return; + } + + /* sclk is in MHz */ + ptp->clock_rate = sclk * 1000000; + + /* Enable PTP clock */ + clock_cfg = readq(ptp->reg_base + PTP_CLOCK_CFG); + + if (ext_clk_freq) { + ptp->clock_rate = ext_clk_freq; + /* Set GPIO as PTP clock source */ + clock_cfg &= ~PTP_CLOCK_CFG_EXT_CLK_IN_MASK; + clock_cfg |= PTP_CLOCK_CFG_EXT_CLK_EN; + } + + if (extts) { + clock_cfg |= PTP_CLOCK_CFG_TSTMP_EDGE; + /* Set GPIO as timestamping source */ + clock_cfg &= ~PTP_CLOCK_CFG_TSTMP_IN_MASK; + clock_cfg |= PTP_CLOCK_CFG_TSTMP_EN; + } + + clock_cfg |= PTP_CLOCK_CFG_PTP_EN; + clock_cfg |= PTP_CLOCK_CFG_PPS_EN | PTP_CLOCK_CFG_PPS_INV; + writeq(clock_cfg, ptp->reg_base + PTP_CLOCK_CFG); + + /* Set 50% duty cycle for 1Hz output */ + writeq(0x1dcd650000000000, ptp->reg_base + PTP_PPS_HI_INCR); + writeq(0x1dcd650000000000, ptp->reg_base + PTP_PPS_LO_INCR); + + clock_comp = ((u64)1000000000ull << 32) / ptp->clock_rate; + /* Initial compensation value to start the nanosecs counter */ + writeq(clock_comp, ptp->reg_base + PTP_CLOCK_COMP); +} + +static int ptp_get_tstmp(struct ptp *ptp, u64 *clk) +{ + *clk = readq(ptp->reg_base + PTP_TIMESTAMP); + + return 0; +} + +static int ptp_set_thresh(struct ptp *ptp, u64 thresh) +{ + writeq(thresh, ptp->reg_base + PTP_PPS_THRESH_HI); + + return 0; +} + static int ptp_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { struct device *dev = &pdev->dev; struct ptp *ptp; - u64 clock_comp; - u64 clock_cfg; int err; ptp = devm_kzalloc(dev, sizeof(*ptp), GFP_KERNEL); @@ -172,17 +208,6 @@ static int ptp_probe(struct pci_dev *pdev, ptp->reg_base = pcim_iomap_table(pdev)[PCI_PTP_BAR_NO]; - ptp->clock_rate = get_clock_rate(); - - /* Enable PTP clock */ - clock_cfg = readq(ptp->reg_base + PTP_CLOCK_CFG); - clock_cfg |= PTP_CLOCK_CFG_PTP_EN; - writeq(clock_cfg, ptp->reg_base + PTP_CLOCK_CFG); - - clock_comp = ((u64)1000000000ull << 32) / ptp->clock_rate; - /* Initial compensation value to start the nanosecs counter */ - writeq(clock_comp, ptp->reg_base + PTP_CLOCK_COMP); - pci_set_drvdata(pdev, ptp); if (!first_ptp_block) first_ptp_block = ptp; @@ -272,6 +297,12 @@ int rvu_mbox_handler_ptp_op(struct rvu *rvu, struct ptp_req *req, case PTP_OP_GET_CLOCK: err = ptp_get_clock(rvu->ptp, &rsp->clk); break; + case PTP_OP_GET_TSTMP: + err = ptp_get_tstmp(rvu->ptp, &rsp->clk); + break; + case PTP_OP_SET_THRESH: + err = ptp_set_thresh(rvu->ptp, req->thresh); + break; default: err = -EINVAL; break; |