diff options
Diffstat (limited to 'drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c')
| -rw-r--r-- | drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c | 79 |
1 files changed, 76 insertions, 3 deletions
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c index 66da31f30d3e..b9d7601138ca 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c @@ -222,8 +222,11 @@ EXPORT_SYMBOL(otx2_set_mac_address); int otx2_hw_set_mtu(struct otx2_nic *pfvf, int mtu) { struct nix_frs_cfg *req; + u16 maxlen; int err; + maxlen = otx2_get_max_mtu(pfvf) + OTX2_ETH_HLEN + OTX2_HW_TIMESTAMP_LEN; + mutex_lock(&pfvf->mbox.lock); req = otx2_mbox_alloc_msg_nix_set_hw_frs(&pfvf->mbox); if (!req) { @@ -233,6 +236,10 @@ int otx2_hw_set_mtu(struct otx2_nic *pfvf, int mtu) req->maxlen = pfvf->netdev->mtu + OTX2_ETH_HLEN + OTX2_HW_TIMESTAMP_LEN; + /* Use max receive length supported by hardware for loopback devices */ + if (is_otx2_lbkvf(pfvf->pdev)) + req->maxlen = maxlen; + err = otx2_sync_mbox_msg(&pfvf->mbox); mutex_unlock(&pfvf->mbox.lock); return err; @@ -262,6 +269,7 @@ unlock: mutex_unlock(&pfvf->mbox.lock); return err; } +EXPORT_SYMBOL(otx2_config_pause_frm); int otx2_set_flowkey_cfg(struct otx2_nic *pfvf) { @@ -931,7 +939,11 @@ static int otx2_cq_init(struct otx2_nic *pfvf, u16 qidx) if (!is_otx2_lbkvf(pfvf->pdev)) { /* Enable receive CQ backpressure */ aq->cq.bp_ena = 1; +#ifdef CONFIG_DCB + aq->cq.bpid = pfvf->bpid[pfvf->queue_to_pfc_map[qidx]]; +#else aq->cq.bpid = pfvf->bpid[0]; +#endif /* Set backpressure level is same as cq pass level */ aq->cq.bp = RQ_PASS_LVL_CQ(pfvf->hw.rq_skid, qset->rqe_cnt); @@ -1036,7 +1048,7 @@ int otx2_config_nix(struct otx2_nic *pfvf) struct nix_lf_alloc_rsp *rsp; int err; - pfvf->qset.xqe_size = NIX_XQESZ_W16 ? 128 : 512; + pfvf->qset.xqe_size = pfvf->hw.xqe_size; /* Get memory to put this msg */ nixlf = otx2_mbox_alloc_msg_nix_lf_alloc(&pfvf->mbox); @@ -1049,7 +1061,7 @@ int otx2_config_nix(struct otx2_nic *pfvf) nixlf->cq_cnt = pfvf->qset.cq_cnt; nixlf->rss_sz = MAX_RSS_INDIR_TBL_SIZE; nixlf->rss_grps = MAX_RSS_GROUPS; - nixlf->xqe_sz = NIX_XQESZ_W16; + nixlf->xqe_sz = pfvf->hw.xqe_size == 128 ? NIX_XQESZ_W16 : NIX_XQESZ_W64; /* We don't know absolute NPA LF idx attached. * AF will replace 'RVU_DEFAULT_PF_FUNC' with * NPA LF attached to this RVU PF/VF. @@ -1211,7 +1223,11 @@ static int otx2_aura_init(struct otx2_nic *pfvf, int aura_id, */ if (pfvf->nix_blkaddr == BLKADDR_NIX1) aq->aura.bp_ena = 1; +#ifdef CONFIG_DCB + aq->aura.nix0_bpid = pfvf->bpid[pfvf->queue_to_pfc_map[aura_id]]; +#else aq->aura.nix0_bpid = pfvf->bpid[0]; +#endif /* Set backpressure level for RQ's Aura */ aq->aura.bp = RQ_BP_LVL_AURA; @@ -1538,11 +1554,18 @@ int otx2_nix_config_bp(struct otx2_nic *pfvf, bool enable) return -ENOMEM; req->chan_base = 0; - req->chan_cnt = 1; +#ifdef CONFIG_DCB + req->chan_cnt = pfvf->pfc_en ? IEEE_8021QAZ_MAX_TCS : 1; + req->bpid_per_chan = pfvf->pfc_en ? 1 : 0; +#else + req->chan_cnt = 1; req->bpid_per_chan = 0; +#endif + return otx2_sync_mbox_msg(&pfvf->mbox); } +EXPORT_SYMBOL(otx2_nix_config_bp); /* Mbox message handlers */ void mbox_handler_cgx_stats(struct otx2_nic *pfvf, @@ -1704,6 +1727,56 @@ out: } EXPORT_SYMBOL(otx2_get_max_mtu); +int otx2_handle_ntuple_tc_features(struct net_device *netdev, netdev_features_t features) +{ + netdev_features_t changed = features ^ netdev->features; + struct otx2_nic *pfvf = netdev_priv(netdev); + bool ntuple = !!(features & NETIF_F_NTUPLE); + bool tc = !!(features & NETIF_F_HW_TC); + + if ((changed & NETIF_F_NTUPLE) && !ntuple) + otx2_destroy_ntuple_flows(pfvf); + + if ((changed & NETIF_F_NTUPLE) && ntuple) { + if (!pfvf->flow_cfg->max_flows) { + netdev_err(netdev, + "Can't enable NTUPLE, MCAM entries not allocated\n"); + return -EINVAL; + } + } + + if ((changed & NETIF_F_HW_TC) && tc) { + if (!pfvf->flow_cfg->max_flows) { + netdev_err(netdev, + "Can't enable TC, MCAM entries not allocated\n"); + return -EINVAL; + } + } + + if ((changed & NETIF_F_HW_TC) && !tc && + pfvf->flow_cfg && pfvf->flow_cfg->nr_flows) { + netdev_err(netdev, "Can't disable TC hardware offload while flows are active\n"); + return -EBUSY; + } + + if ((changed & NETIF_F_NTUPLE) && ntuple && + (netdev->features & NETIF_F_HW_TC) && !(changed & NETIF_F_HW_TC)) { + netdev_err(netdev, + "Can't enable NTUPLE when TC is active, disable TC and retry\n"); + return -EINVAL; + } + + if ((changed & NETIF_F_HW_TC) && tc && + (netdev->features & NETIF_F_NTUPLE) && !(changed & NETIF_F_NTUPLE)) { + netdev_err(netdev, + "Can't enable TC when NTUPLE is active, disable NTUPLE and retry\n"); + return -EINVAL; + } + + return 0; +} +EXPORT_SYMBOL(otx2_handle_ntuple_tc_features); + #define M(_name, _id, _fn_name, _req_type, _rsp_type) \ int __weak \ otx2_mbox_up_handler_ ## _fn_name(struct otx2_nic *pfvf, \ |