diff options
Diffstat (limited to 'drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c')
-rw-r--r-- | drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 92 |
1 files changed, 72 insertions, 20 deletions
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index d9076d543104..abdf721bb264 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -447,12 +447,29 @@ int mlx5e_ethtool_set_channels(struct mlx5e_priv *priv, goto out; } - new_channels.params = priv->channels.params; + /* Don't allow changing the number of channels if HTB offload is active, + * because the numeration of the QoS SQs will change, while per-queue + * qdiscs are attached. + */ + if (priv->htb.maj_id) { + err = -EINVAL; + netdev_err(priv->netdev, "%s: HTB offload is active, cannot change the number of channels\n", + __func__); + goto out; + } + + new_channels.params = *cur_params; new_channels.params.num_channels = count; if (!test_bit(MLX5E_STATE_OPENED, &priv->state)) { + struct mlx5e_params old_params; + + old_params = *cur_params; *cur_params = new_channels.params; err = mlx5e_num_channels_changed(priv); + if (err) + *cur_params = old_params; + goto out; } @@ -519,7 +536,7 @@ static int mlx5e_get_coalesce(struct net_device *netdev, #define MLX5E_MAX_COAL_FRAMES MLX5_MAX_CQ_COUNT static void -mlx5e_set_priv_channels_coalesce(struct mlx5e_priv *priv, struct ethtool_coalesce *coal) +mlx5e_set_priv_channels_tx_coalesce(struct mlx5e_priv *priv, struct ethtool_coalesce *coal) { struct mlx5_core_dev *mdev = priv->mdev; int tc; @@ -534,6 +551,17 @@ mlx5e_set_priv_channels_coalesce(struct mlx5e_priv *priv, struct ethtool_coalesc coal->tx_coalesce_usecs, coal->tx_max_coalesced_frames); } + } +} + +static void +mlx5e_set_priv_channels_rx_coalesce(struct mlx5e_priv *priv, struct ethtool_coalesce *coal) +{ + struct mlx5_core_dev *mdev = priv->mdev; + int i; + + for (i = 0; i < priv->channels.num; ++i) { + struct mlx5e_channel *c = priv->channels.c[i]; mlx5_core_modify_cq_moderation(mdev, &c->rq.cq.mcq, coal->rx_coalesce_usecs, @@ -580,21 +608,9 @@ int mlx5e_ethtool_set_coalesce(struct mlx5e_priv *priv, tx_moder->pkts = coal->tx_max_coalesced_frames; new_channels.params.tx_dim_enabled = !!coal->use_adaptive_tx_coalesce; - if (!test_bit(MLX5E_STATE_OPENED, &priv->state)) { - priv->channels.params = new_channels.params; - goto out; - } - /* we are opened */ - reset_rx = !!coal->use_adaptive_rx_coalesce != priv->channels.params.rx_dim_enabled; reset_tx = !!coal->use_adaptive_tx_coalesce != priv->channels.params.tx_dim_enabled; - if (!reset_rx && !reset_tx) { - mlx5e_set_priv_channels_coalesce(priv, coal); - priv->channels.params = new_channels.params; - goto out; - } - if (reset_rx) { u8 mode = MLX5E_GET_PFLAG(&new_channels.params, MLX5E_PFLAG_RX_CQE_BASED_MODER); @@ -608,6 +624,20 @@ int mlx5e_ethtool_set_coalesce(struct mlx5e_priv *priv, mlx5e_reset_tx_moderation(&new_channels.params, mode); } + if (!test_bit(MLX5E_STATE_OPENED, &priv->state)) { + priv->channels.params = new_channels.params; + goto out; + } + + if (!reset_rx && !reset_tx) { + if (!coal->use_adaptive_rx_coalesce) + mlx5e_set_priv_channels_rx_coalesce(priv, coal); + if (!coal->use_adaptive_tx_coalesce) + mlx5e_set_priv_channels_tx_coalesce(priv, coal); + priv->channels.params = new_channels.params; + goto out; + } + err = mlx5e_safe_switch_channels(priv, &new_channels, NULL, NULL); out: @@ -1010,6 +1040,22 @@ static int mlx5e_get_link_ksettings(struct net_device *netdev, return mlx5e_ethtool_get_link_ksettings(priv, link_ksettings); } +static int mlx5e_speed_validate(struct net_device *netdev, bool ext, + const unsigned long link_modes, u8 autoneg) +{ + /* Extended link-mode has no speed limitations. */ + if (ext) + return 0; + + if ((link_modes & MLX5E_PROT_MASK(MLX5E_56GBASE_R4)) && + autoneg != AUTONEG_ENABLE) { + netdev_err(netdev, "%s: 56G link speed requires autoneg enabled\n", + __func__); + return -EINVAL; + } + return 0; +} + static u32 mlx5e_ethtool2ptys_adver_link(const unsigned long *link_modes) { u32 i, ptys_modes = 0; @@ -1103,13 +1149,9 @@ int mlx5e_ethtool_set_link_ksettings(struct mlx5e_priv *priv, link_modes = autoneg == AUTONEG_ENABLE ? ethtool2ptys_adver_func(adver) : mlx5e_port_speed2linkmodes(mdev, speed, !ext); - if ((link_modes & MLX5E_PROT_MASK(MLX5E_56GBASE_R4)) && - autoneg != AUTONEG_ENABLE) { - netdev_err(priv->netdev, "%s: 56G link speed requires autoneg enabled\n", - __func__); - err = -EINVAL; + err = mlx5e_speed_validate(priv->netdev, ext, link_modes, autoneg); + if (err) goto out; - } link_modes = link_modes & eproto.cap; if (!link_modes) { @@ -1954,6 +1996,16 @@ static int set_pflag_tx_port_ts(struct net_device *netdev, bool enable) if (!MLX5_CAP_GEN(mdev, ts_cqe_to_dest_cqn)) return -EOPNOTSUPP; + /* Don't allow changing the PTP state if HTB offload is active, because + * the numeration of the QoS SQs will change, while per-queue qdiscs are + * attached. + */ + if (priv->htb.maj_id) { + netdev_err(priv->netdev, "%s: HTB offload is active, cannot change the PTP state\n", + __func__); + return -EINVAL; + } + new_channels.params = priv->channels.params; MLX5E_SET_PFLAG(&new_channels.params, MLX5E_PFLAG_TX_PORT_TS, enable); /* No need to verify SQ stop room as |