diff options
Diffstat (limited to 'drivers/net/ethernet/qlogic/qlge/qlge_mpi.c')
| -rw-r--r-- | drivers/net/ethernet/qlogic/qlge/qlge_mpi.c | 1285 |
1 files changed, 0 insertions, 1285 deletions
diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_mpi.c b/drivers/net/ethernet/qlogic/qlge/qlge_mpi.c deleted file mode 100644 index 957c72985a06..000000000000 --- a/drivers/net/ethernet/qlogic/qlge/qlge_mpi.c +++ /dev/null @@ -1,1285 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "qlge.h" - -int ql_unpause_mpi_risc(struct ql_adapter *qdev) -{ - u32 tmp; - - /* Un-pause the RISC */ - tmp = ql_read32(qdev, CSR); - if (!(tmp & CSR_RP)) - return -EIO; - - ql_write32(qdev, CSR, CSR_CMD_CLR_PAUSE); - return 0; -} - -int ql_pause_mpi_risc(struct ql_adapter *qdev) -{ - u32 tmp; - int count = UDELAY_COUNT; - - /* Pause the RISC */ - ql_write32(qdev, CSR, CSR_CMD_SET_PAUSE); - do { - tmp = ql_read32(qdev, CSR); - if (tmp & CSR_RP) - break; - mdelay(UDELAY_DELAY); - count--; - } while (count); - return (count == 0) ? -ETIMEDOUT : 0; -} - -int ql_hard_reset_mpi_risc(struct ql_adapter *qdev) -{ - u32 tmp; - int count = UDELAY_COUNT; - - /* Reset the RISC */ - ql_write32(qdev, CSR, CSR_CMD_SET_RST); - do { - tmp = ql_read32(qdev, CSR); - if (tmp & CSR_RR) { - ql_write32(qdev, CSR, CSR_CMD_CLR_RST); - break; - } - mdelay(UDELAY_DELAY); - count--; - } while (count); - return (count == 0) ? -ETIMEDOUT : 0; -} - -int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data) -{ - int status; - /* wait for reg to come ready */ - status = ql_wait_reg_rdy(qdev, PROC_ADDR, PROC_ADDR_RDY, PROC_ADDR_ERR); - if (status) - goto exit; - /* set up for reg read */ - ql_write32(qdev, PROC_ADDR, reg | PROC_ADDR_R); - /* wait for reg to come ready */ - status = ql_wait_reg_rdy(qdev, PROC_ADDR, PROC_ADDR_RDY, PROC_ADDR_ERR); - if (status) - goto exit; - /* get the data */ - *data = ql_read32(qdev, PROC_DATA); -exit: - return status; -} - -int ql_write_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 data) -{ - int status = 0; - /* wait for reg to come ready */ - status = ql_wait_reg_rdy(qdev, PROC_ADDR, PROC_ADDR_RDY, PROC_ADDR_ERR); - if (status) - goto exit; - /* write the data to the data reg */ - ql_write32(qdev, PROC_DATA, data); - /* trigger the write */ - ql_write32(qdev, PROC_ADDR, reg); - /* wait for reg to come ready */ - status = ql_wait_reg_rdy(qdev, PROC_ADDR, PROC_ADDR_RDY, PROC_ADDR_ERR); - if (status) - goto exit; -exit: - return status; -} - -int ql_soft_reset_mpi_risc(struct ql_adapter *qdev) -{ - int status; - status = ql_write_mpi_reg(qdev, 0x00001010, 1); - return status; -} - -/* Determine if we are in charge of the firwmare. If - * we are the lower of the 2 NIC pcie functions, or if - * we are the higher function and the lower function - * is not enabled. - */ -int ql_own_firmware(struct ql_adapter *qdev) -{ - u32 temp; - - /* If we are the lower of the 2 NIC functions - * on the chip the we are responsible for - * core dump and firmware reset after an error. - */ - if (qdev->func < qdev->alt_func) - return 1; - - /* If we are the higher of the 2 NIC functions - * on the chip and the lower function is not - * enabled, then we are responsible for - * core dump and firmware reset after an error. - */ - temp = ql_read32(qdev, STS); - if (!(temp & (1 << (8 + qdev->alt_func)))) - return 1; - - return 0; - -} - -static int ql_get_mb_sts(struct ql_adapter *qdev, struct mbox_params *mbcp) -{ - int i, status; - - status = ql_sem_spinlock(qdev, SEM_PROC_REG_MASK); - if (status) - return -EBUSY; - for (i = 0; i < mbcp->out_count; i++) { - status = - ql_read_mpi_reg(qdev, qdev->mailbox_out + i, - &mbcp->mbox_out[i]); - if (status) { - netif_err(qdev, drv, qdev->ndev, "Failed mailbox read.\n"); - break; - } - } - ql_sem_unlock(qdev, SEM_PROC_REG_MASK); /* does flush too */ - return status; -} - -/* Wait for a single mailbox command to complete. - * Returns zero on success. - */ -static int ql_wait_mbx_cmd_cmplt(struct ql_adapter *qdev) -{ - int count = 100; - u32 value; - - do { - value = ql_read32(qdev, STS); - if (value & STS_PI) - return 0; - mdelay(UDELAY_DELAY); /* 100ms */ - } while (--count); - return -ETIMEDOUT; -} - -/* Execute a single mailbox command. - * Caller must hold PROC_ADDR semaphore. - */ -static int ql_exec_mb_cmd(struct ql_adapter *qdev, struct mbox_params *mbcp) -{ - int i, status; - - /* - * Make sure there's nothing pending. - * This shouldn't happen. - */ - if (ql_read32(qdev, CSR) & CSR_HRI) - return -EIO; - - status = ql_sem_spinlock(qdev, SEM_PROC_REG_MASK); - if (status) - return status; - - /* - * Fill the outbound mailboxes. - */ - for (i = 0; i < mbcp->in_count; i++) { - status = ql_write_mpi_reg(qdev, qdev->mailbox_in + i, - mbcp->mbox_in[i]); - if (status) - goto end; - } - /* - * Wake up the MPI firmware. - */ - ql_write32(qdev, CSR, CSR_CMD_SET_H2R_INT); -end: - ql_sem_unlock(qdev, SEM_PROC_REG_MASK); - return status; -} - -/* We are being asked by firmware to accept - * a change to the port. This is only - * a change to max frame sizes (Tx/Rx), pause - * parameters, or loopback mode. We wake up a worker - * to handler processing this since a mailbox command - * will need to be sent to ACK the request. - */ -static int ql_idc_req_aen(struct ql_adapter *qdev) -{ - int status; - struct mbox_params *mbcp = &qdev->idc_mbc; - - netif_err(qdev, drv, qdev->ndev, "Enter!\n"); - /* Get the status data and start up a thread to - * handle the request. - */ - mbcp->out_count = 4; - status = ql_get_mb_sts(qdev, mbcp); - if (status) { - netif_err(qdev, drv, qdev->ndev, - "Could not read MPI, resetting ASIC!\n"); - ql_queue_asic_error(qdev); - } else { - /* Begin polled mode early so - * we don't get another interrupt - * when we leave mpi_worker. - */ - ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16)); - queue_delayed_work(qdev->workqueue, &qdev->mpi_idc_work, 0); - } - return status; -} - -/* Process an inter-device event completion. - * If good, signal the caller's completion. - */ -static int ql_idc_cmplt_aen(struct ql_adapter *qdev) -{ - int status; - struct mbox_params *mbcp = &qdev->idc_mbc; - mbcp->out_count = 4; - status = ql_get_mb_sts(qdev, mbcp); - if (status) { - netif_err(qdev, drv, qdev->ndev, - "Could not read MPI, resetting RISC!\n"); - ql_queue_fw_error(qdev); - } else - /* Wake up the sleeping mpi_idc_work thread that is - * waiting for this event. - */ - complete(&qdev->ide_completion); - - return status; -} - -static void ql_link_up(struct ql_adapter *qdev, struct mbox_params *mbcp) -{ - int status; - mbcp->out_count = 2; - - status = ql_get_mb_sts(qdev, mbcp); - if (status) { - netif_err(qdev, drv, qdev->ndev, - "%s: Could not get mailbox status.\n", __func__); - return; - } - - qdev->link_status = mbcp->mbox_out[1]; - netif_err(qdev, drv, qdev->ndev, "Link Up.\n"); - - /* If we're coming back from an IDC event - * then set up the CAM and frame routing. - */ - if (test_bit(QL_CAM_RT_SET, &qdev->flags)) { - status = ql_cam_route_initialize(qdev); - if (status) { - netif_err(qdev, ifup, qdev->ndev, - "Failed to init CAM/Routing tables.\n"); - return; - } else - clear_bit(QL_CAM_RT_SET, &qdev->flags); - } - - /* Queue up a worker to check the frame - * size information, and fix it if it's not - * to our liking. - */ - if (!test_bit(QL_PORT_CFG, &qdev->flags)) { - netif_err(qdev, drv, qdev->ndev, "Queue Port Config Worker!\n"); - set_bit(QL_PORT_CFG, &qdev->flags); - /* Begin polled mode early so - * we don't get another interrupt - * when we leave mpi_worker dpc. - */ - ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16)); - queue_delayed_work(qdev->workqueue, - &qdev->mpi_port_cfg_work, 0); - } - - ql_link_on(qdev); -} - -static void ql_link_down(struct ql_adapter *qdev, struct mbox_params *mbcp) -{ - int status; - - mbcp->out_count = 3; - - status = ql_get_mb_sts(qdev, mbcp); - if (status) - netif_err(qdev, drv, qdev->ndev, "Link down AEN broken!\n"); - - ql_link_off(qdev); -} - -static int ql_sfp_in(struct ql_adapter *qdev, struct mbox_params *mbcp) -{ - int status; - - mbcp->out_count = 5; - - status = ql_get_mb_sts(qdev, mbcp); - if (status) - netif_err(qdev, drv, qdev->ndev, "SFP in AEN broken!\n"); - else - netif_err(qdev, drv, qdev->ndev, "SFP insertion detected.\n"); - - return status; -} - -static int ql_sfp_out(struct ql_adapter *qdev, struct mbox_params *mbcp) -{ - int status; - - mbcp->out_count = 1; - - status = ql_get_mb_sts(qdev, mbcp); - if (status) - netif_err(qdev, drv, qdev->ndev, "SFP out AEN broken!\n"); - else - netif_err(qdev, drv, qdev->ndev, "SFP removal detected.\n"); - - return status; -} - -static int ql_aen_lost(struct ql_adapter *qdev, struct mbox_params *mbcp) -{ - int status; - - mbcp->out_count = 6; - - status = ql_get_mb_sts(qdev, mbcp); - if (status) - netif_err(qdev, drv, qdev->ndev, "Lost AEN broken!\n"); - else { - int i; - netif_err(qdev, drv, qdev->ndev, "Lost AEN detected.\n"); - for (i = 0; i < mbcp->out_count; i++) - netif_err(qdev, drv, qdev->ndev, "mbox_out[%d] = 0x%.08x.\n", - i, mbcp->mbox_out[i]); - - } - - return status; -} - -static void ql_init_fw_done(struct ql_adapter *qdev, struct mbox_params *mbcp) -{ - int status; - - mbcp->out_count = 2; - - status = ql_get_mb_sts(qdev, mbcp); - if (status) { - netif_err(qdev, drv, qdev->ndev, "Firmware did not initialize!\n"); - } else { - netif_err(qdev, drv, qdev->ndev, "Firmware Revision = 0x%.08x.\n", - mbcp->mbox_out[1]); - qdev->fw_rev_id = mbcp->mbox_out[1]; - status = ql_cam_route_initialize(qdev); - if (status) - netif_err(qdev, ifup, qdev->ndev, - "Failed to init CAM/Routing tables.\n"); - } -} - -/* Process an async event and clear it unless it's an - * error condition. - * This can get called iteratively from the mpi_work thread - * when events arrive via an interrupt. - * It also gets called when a mailbox command is polling for - * it's completion. */ -static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp) -{ - int status; - int orig_count = mbcp->out_count; - - /* Just get mailbox zero for now. */ - mbcp->out_count = 1; - status = ql_get_mb_sts(qdev, mbcp); - if (status) { - netif_err(qdev, drv, qdev->ndev, - "Could not read MPI, resetting ASIC!\n"); - ql_queue_asic_error(qdev); - goto end; - } - - switch (mbcp->mbox_out[0]) { - - /* This case is only active when we arrive here - * as a result of issuing a mailbox command to - * the firmware. - */ - case MB_CMD_STS_INTRMDT: - case MB_CMD_STS_GOOD: - case MB_CMD_STS_INVLD_CMD: - case MB_CMD_STS_XFC_ERR: - case MB_CMD_STS_CSUM_ERR: - case MB_CMD_STS_ERR: - case MB_CMD_STS_PARAM_ERR: - /* We can only get mailbox status if we're polling from an - * unfinished command. Get the rest of the status data and - * return back to the caller. - * We only end up here when we're polling for a mailbox - * command completion. - */ - mbcp->out_count = orig_count; - status = ql_get_mb_sts(qdev, mbcp); - return status; - - /* We are being asked by firmware to accept - * a change to the port. This is only - * a change to max frame sizes (Tx/Rx), pause - * parameters, or loopback mode. - */ - case AEN_IDC_REQ: - status = ql_idc_req_aen(qdev); - break; - - /* Process and inbound IDC event. - * This will happen when we're trying to - * change tx/rx max frame size, change pause - * parameters or loopback mode. - */ - case AEN_IDC_CMPLT: - case AEN_IDC_EXT: - status = ql_idc_cmplt_aen(qdev); - break; - - case AEN_LINK_UP: - ql_link_up(qdev, mbcp); - break; - - case AEN_LINK_DOWN: - ql_link_down(qdev, mbcp); - break; - - case AEN_FW_INIT_DONE: - /* If we're in process on executing the firmware, - * then convert the status to normal mailbox status. - */ - if (mbcp->mbox_in[0] == MB_CMD_EX_FW) { - mbcp->out_count = orig_count; - status = ql_get_mb_sts(qdev, mbcp); - mbcp->mbox_out[0] = MB_CMD_STS_GOOD; - return status; - } - ql_init_fw_done(qdev, mbcp); - break; - - case AEN_AEN_SFP_IN: - ql_sfp_in(qdev, mbcp); - break; - - case AEN_AEN_SFP_OUT: - ql_sfp_out(qdev, mbcp); - break; - - /* This event can arrive at boot time or after an - * MPI reset if the firmware failed to initialize. - */ - case AEN_FW_INIT_FAIL: - /* If we're in process on executing the firmware, - * then convert the status to normal mailbox status. - */ - if (mbcp->mbox_in[0] == MB_CMD_EX_FW) { - mbcp->out_count = orig_count; - status = ql_get_mb_sts(qdev, mbcp); - mbcp->mbox_out[0] = MB_CMD_STS_ERR; - return status; - } - netif_err(qdev, drv, qdev->ndev, - "Firmware initialization failed.\n"); - status = -EIO; - ql_queue_fw_error(qdev); - break; - - case AEN_SYS_ERR: - netif_err(qdev, drv, qdev->ndev, "System Error.\n"); - ql_queue_fw_error(qdev); - status = -EIO; - break; - - case AEN_AEN_LOST: - ql_aen_lost(qdev, mbcp); - break; - - case AEN_DCBX_CHG: - /* Need to support AEN 8110 */ - break; - default: - netif_err(qdev, drv, qdev->ndev, - "Unsupported AE %.08x.\n", mbcp->mbox_out[0]); - /* Clear the MPI firmware status. */ - } -end: - ql_write32(qdev, CSR, CSR_CMD_CLR_R2PCI_INT); - /* Restore the original mailbox count to - * what the caller asked for. This can get - * changed when a mailbox command is waiting - * for a response and an AEN arrives and - * is handled. - * */ - mbcp->out_count = orig_count; - return status; -} - -/* Execute a single mailbox command. - * mbcp is a pointer to an array of u32. Each - * element in the array contains the value for it's - * respective mailbox register. - */ -static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp) -{ - int status; - unsigned long count; - - mutex_lock(&qdev->mpi_mutex); - - /* Begin polled mode for MPI */ - ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16)); - - /* Load the mailbox registers and wake up MPI RISC. */ - status = ql_exec_mb_cmd(qdev, mbcp); - if (status) - goto end; - - - /* If we're generating a system error, then there's nothing - * to wait for. - */ - if (mbcp->mbox_in[0] == MB_CMD_MAKE_SYS_ERR) - goto end; - - /* Wait for the command to complete. We loop - * here because some AEN might arrive while - * we're waiting for the mailbox command to - * complete. If more than 5 seconds expire we can - * assume something is wrong. */ - count = jiffies + HZ * MAILBOX_TIMEOUT; - do { - /* Wait for the interrupt to come in. */ - status = ql_wait_mbx_cmd_cmplt(qdev); - if (status) - continue; - - /* Process the event. If it's an AEN, it - * will be handled in-line or a worker - * will be spawned. If it's our completion - * we will catch it below. - */ - status = ql_mpi_handler(qdev, mbcp); - if (status) - goto end; - - /* It's either the completion for our mailbox - * command complete or an AEN. If it's our - * completion then get out. - */ - if (((mbcp->mbox_out[0] & 0x0000f000) == - MB_CMD_STS_GOOD) || - ((mbcp->mbox_out[0] & 0x0000f000) == - MB_CMD_STS_INTRMDT)) - goto done; - } while (time_before(jiffies, count)); - - netif_err(qdev, drv, qdev->ndev, - "Timed out waiting for mailbox complete.\n"); - status = -ETIMEDOUT; - goto end; - -done: - - /* Now we can clear the interrupt condition - * and look at our status. - */ - ql_write32(qdev, CSR, CSR_CMD_CLR_R2PCI_INT); - - if (((mbcp->mbox_out[0] & 0x0000f000) != - MB_CMD_STS_GOOD) && - ((mbcp->mbox_out[0] & 0x0000f000) != - MB_CMD_STS_INTRMDT)) { - status = -EIO; - } -end: - /* End polled mode for MPI */ - ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI); - mutex_unlock(&qdev->mpi_mutex); - return status; -} - -/* Get MPI firmware version. This will be used for - * driver banner and for ethtool info. - * Returns zero on success. - */ -int ql_mb_about_fw(struct ql_adapter *qdev) -{ - struct mbox_params mbc; - struct mbox_params *mbcp = &mbc; - int status = 0; - - memset(mbcp, 0, sizeof(struct mbox_params)); - - mbcp->in_count = 1; - mbcp->out_count = 3; - - mbcp->mbox_in[0] = MB_CMD_ABOUT_FW; - - status = ql_mailbox_command(qdev, mbcp); - if (status) - return status; - - if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) { - netif_err(qdev, drv, qdev->ndev, - "Failed about firmware command\n"); - status = -EIO; - } - - /* Store the firmware version */ - qdev->fw_rev_id = mbcp->mbox_out[1]; - - return status; -} - -/* Get functional state for MPI firmware. - * Returns zero on success. - */ -int ql_mb_get_fw_state(struct ql_adapter *qdev) -{ - struct mbox_params mbc; - struct mbox_params *mbcp = &mbc; - int status = 0; - - memset(mbcp, 0, sizeof(struct mbox_params)); - - mbcp->in_count = 1; - mbcp->out_count = 2; - - mbcp->mbox_in[0] = MB_CMD_GET_FW_STATE; - - status = ql_mailbox_command(qdev, mbcp); - if (status) - return status; - - if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) { - netif_err(qdev, drv, qdev->ndev, - "Failed Get Firmware State.\n"); - status = -EIO; - } - - /* If bit zero is set in mbx 1 then the firmware is - * running, but not initialized. This should never - * happen. - */ - if (mbcp->mbox_out[1] & 1) { - netif_err(qdev, drv, qdev->ndev, - "Firmware waiting for initialization.\n"); - status = -EIO; - } - - return status; -} - -/* Send and ACK mailbox command to the firmware to - * let it continue with the change. - */ -static int ql_mb_idc_ack(struct ql_adapter *qdev) -{ - struct mbox_params mbc; - struct mbox_params *mbcp = &mbc; - int status = 0; - - memset(mbcp, 0, sizeof(struct mbox_params)); - - mbcp->in_count = 5; - mbcp->out_count = 1; - - mbcp->mbox_in[0] = MB_CMD_IDC_ACK; - mbcp->mbox_in[1] = qdev->idc_mbc.mbox_out[1]; - mbcp->mbox_in[2] = qdev->idc_mbc.mbox_out[2]; - mbcp->mbox_in[3] = qdev->idc_mbc.mbox_out[3]; - mbcp->mbox_in[4] = qdev->idc_mbc.mbox_out[4]; - - status = ql_mailbox_command(qdev, mbcp); - if (status) - return status; - - if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) { - netif_err(qdev, drv, qdev->ndev, "Failed IDC ACK send.\n"); - status = -EIO; - } - return status; -} - -/* Get link settings and maximum frame size settings - * for the current port. - * Most likely will block. - */ -int ql_mb_set_port_cfg(struct ql_adapter *qdev) -{ - struct mbox_params mbc; - struct mbox_params *mbcp = &mbc; - int status = 0; - - memset(mbcp, 0, sizeof(struct mbox_params)); - - mbcp->in_count = 3; - mbcp->out_count = 1; - - mbcp->mbox_in[0] = MB_CMD_SET_PORT_CFG; - mbcp->mbox_in[1] = qdev->link_config; - mbcp->mbox_in[2] = qdev->max_frame_size; - - - status = ql_mailbox_command(qdev, mbcp); - if (status) - return status; - - if (mbcp->mbox_out[0] == MB_CMD_STS_INTRMDT) { - netif_err(qdev, drv, qdev->ndev, - "Port Config sent, wait for IDC.\n"); - } else if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) { - netif_err(qdev, drv, qdev->ndev, - "Failed Set Port Configuration.\n"); - status = -EIO; - } - return status; -} - -static int ql_mb_dump_ram(struct ql_adapter *qdev, u64 req_dma, u32 addr, - u32 size) -{ - int status = 0; - struct mbox_params mbc; - struct mbox_params *mbcp = &mbc; - - memset(mbcp, 0, sizeof(struct mbox_params)); - - mbcp->in_count = 9; - mbcp->out_count = 1; - - mbcp->mbox_in[0] = MB_CMD_DUMP_RISC_RAM; - mbcp->mbox_in[1] = LSW(addr); - mbcp->mbox_in[2] = MSW(req_dma); - mbcp->mbox_in[3] = LSW(req_dma); - mbcp->mbox_in[4] = MSW(size); - mbcp->mbox_in[5] = LSW(size); - mbcp->mbox_in[6] = MSW(MSD(req_dma)); - mbcp->mbox_in[7] = LSW(MSD(req_dma)); - mbcp->mbox_in[8] = MSW(addr); - - - status = ql_mailbox_command(qdev, mbcp); - if (status) - return status; - - if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) { - netif_err(qdev, drv, qdev->ndev, "Failed to dump risc RAM.\n"); - status = -EIO; - } - return status; -} - -/* Issue a mailbox command to dump RISC RAM. */ -int ql_dump_risc_ram_area(struct ql_adapter *qdev, void *buf, - u32 ram_addr, int word_count) -{ - int status; - char *my_buf; - dma_addr_t buf_dma; - - my_buf = pci_alloc_consistent(qdev->pdev, word_count * sizeof(u32), - &buf_dma); - if (!my_buf) - return -EIO; - - status = ql_mb_dump_ram(qdev, buf_dma, ram_addr, word_count); - if (!status) - memcpy(buf, my_buf, word_count * sizeof(u32)); - - pci_free_consistent(qdev->pdev, word_count * sizeof(u32), my_buf, - buf_dma); - return status; -} - -/* Get link settings and maximum frame size settings - * for the current port. - * Most likely will block. - */ -int ql_mb_get_port_cfg(struct ql_adapter *qdev) -{ - struct mbox_params mbc; - struct mbox_params *mbcp = &mbc; - int status = 0; - - memset(mbcp, 0, sizeof(struct mbox_params)); - - mbcp->in_count = 1; - mbcp->out_count = 3; - - mbcp->mbox_in[0] = MB_CMD_GET_PORT_CFG; - - status = ql_mailbox_command(qdev, mbcp); - if (status) - return status; - - if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) { - netif_err(qdev, drv, qdev->ndev, - "Failed Get Port Configuration.\n"); - status = -EIO; - } else { - netif_printk(qdev, drv, KERN_DEBUG, qdev->ndev, - "Passed Get Port Configuration.\n"); - qdev->link_config = mbcp->mbox_out[1]; - qdev->max_frame_size = mbcp->mbox_out[2]; - } - return status; -} - -int ql_mb_wol_mode(struct ql_adapter *qdev, u32 wol) -{ - struct mbox_params mbc; - struct mbox_params *mbcp = &mbc; - int status; - - memset(mbcp, 0, sizeof(struct mbox_params)); - - mbcp->in_count = 2; - mbcp->out_count = 1; - - mbcp->mbox_in[0] = MB_CMD_SET_WOL_MODE; - mbcp->mbox_in[1] = wol; - - - status = ql_mailbox_command(qdev, mbcp); - if (status) - return status; - - if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) { - netif_err(qdev, drv, qdev->ndev, "Failed to set WOL mode.\n"); - status = -EIO; - } - return status; -} - -int ql_mb_wol_set_magic(struct ql_adapter *qdev, u32 enable_wol) -{ - struct mbox_params mbc; - struct mbox_params *mbcp = &mbc; - int status; - u8 *addr = qdev->ndev->dev_addr; - - memset(mbcp, 0, sizeof(struct mbox_params)); - - mbcp->in_count = 8; - mbcp->out_count = 1; - - mbcp->mbox_in[0] = MB_CMD_SET_WOL_MAGIC; - if (enable_wol) { - mbcp->mbox_in[1] = (u32)addr[0]; - mbcp->mbox_in[2] = (u32)addr[1]; - mbcp->mbox_in[3] = (u32)addr[2]; - mbcp->mbox_in[4] = (u32)addr[3]; - mbcp->mbox_in[5] = (u32)addr[4]; - mbcp->mbox_in[6] = (u32)addr[5]; - mbcp->mbox_in[7] = 0; - } else { - mbcp->mbox_in[1] = 0; - mbcp->mbox_in[2] = 1; - mbcp->mbox_in[3] = 1; - mbcp->mbox_in[4] = 1; - mbcp->mbox_in[5] = 1; - mbcp->mbox_in[6] = 1; - mbcp->mbox_in[7] = 0; - } - - status = ql_mailbox_command(qdev, mbcp); - if (status) - return status; - - if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) { - netif_err(qdev, drv, qdev->ndev, "Failed to set WOL mode.\n"); - status = -EIO; - } - return status; -} - -/* IDC - Inter Device Communication... - * Some firmware commands require consent of adjacent FCOE - * function. This function waits for the OK, or a - * counter-request for a little more time.i - * The firmware will complete the request if the other - * function doesn't respond. - */ -static int ql_idc_wait(struct ql_adapter *qdev) -{ - int status = -ETIMEDOUT; - long wait_time = 1 * HZ; - struct mbox_params *mbcp = &qdev->idc_mbc; - do { - /* Wait here for the command to complete - * via the IDC process. - */ - wait_time = - wait_for_completion_timeout(&qdev->ide_completion, - wait_time); - if (!wait_time) { - netif_err(qdev, drv, qdev->ndev, "IDC Timeout.\n"); - break; - } - /* Now examine the response from the IDC process. - * We might have a good completion or a request for - * more wait time. - */ - if (mbcp->mbox_out[0] == AEN_IDC_EXT) { - netif_err(qdev, drv, qdev->ndev, - "IDC Time Extension from function.\n"); - wait_time += (mbcp->mbox_out[1] >> 8) & 0x0000000f; - } else if (mbcp->mbox_out[0] == AEN_IDC_CMPLT) { - netif_err(qdev, drv, qdev->ndev, "IDC Success.\n"); - status = 0; - break; - } else { - netif_err(qdev, drv, qdev->ndev, - "IDC: Invalid State 0x%.04x.\n", - mbcp->mbox_out[0]); - status = -EIO; - break; - } - } while (wait_time); - - return status; -} - -int ql_mb_set_led_cfg(struct ql_adapter *qdev, u32 led_config) -{ - struct mbox_params mbc; - struct mbox_params *mbcp = &mbc; - int status; - - memset(mbcp, 0, sizeof(struct mbox_params)); - - mbcp->in_count = 2; - mbcp->out_count = 1; - - mbcp->mbox_in[0] = MB_CMD_SET_LED_CFG; - mbcp->mbox_in[1] = led_config; - - - status = ql_mailbox_command(qdev, mbcp); - if (status) - return status; - - if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) { - netif_err(qdev, drv, qdev->ndev, - "Failed to set LED Configuration.\n"); - status = -EIO; - } - - return status; -} - -int ql_mb_get_led_cfg(struct ql_adapter *qdev) -{ - struct mbox_params mbc; - struct mbox_params *mbcp = &mbc; - int status; - - memset(mbcp, 0, sizeof(struct mbox_params)); - - mbcp->in_count = 1; - mbcp->out_count = 2; - - mbcp->mbox_in[0] = MB_CMD_GET_LED_CFG; - - status = ql_mailbox_command(qdev, mbcp); - if (status) - return status; - - if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) { - netif_err(qdev, drv, qdev->ndev, - "Failed to get LED Configuration.\n"); - status = -EIO; - } else - qdev->led_config = mbcp->mbox_out[1]; - - return status; -} - -int ql_mb_set_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 control) -{ - struct mbox_params mbc; - struct mbox_params *mbcp = &mbc; - int status; - - memset(mbcp, 0, sizeof(struct mbox_params)); - - mbcp->in_count = 1; - mbcp->out_count = 2; - - mbcp->mbox_in[0] = MB_CMD_SET_MGMNT_TFK_CTL; - mbcp->mbox_in[1] = control; - - status = ql_mailbox_command(qdev, mbcp); - if (status) - return status; - - if (mbcp->mbox_out[0] == MB_CMD_STS_GOOD) - return status; - - if (mbcp->mbox_out[0] == MB_CMD_STS_INVLD_CMD) { - netif_err(qdev, drv, qdev->ndev, - "Command not supported by firmware.\n"); - status = -EINVAL; - } else if (mbcp->mbox_out[0] == MB_CMD_STS_ERR) { - /* This indicates that the firmware is - * already in the state we are trying to - * change it to. - */ - netif_err(qdev, drv, qdev->ndev, - "Command parameters make no change.\n"); - } - return status; -} - -/* Returns a negative error code or the mailbox command status. */ -static int ql_mb_get_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 *control) -{ - struct mbox_params mbc; - struct mbox_params *mbcp = &mbc; - int status; - - memset(mbcp, 0, sizeof(struct mbox_params)); - *control = 0; - - mbcp->in_count = 1; - mbcp->out_count = 1; - - mbcp->mbox_in[0] = MB_CMD_GET_MGMNT_TFK_CTL; - - status = ql_mailbox_command(qdev, mbcp); - if (status) - return status; - - if (mbcp->mbox_out[0] == MB_CMD_STS_GOOD) { - *control = mbcp->mbox_in[1]; - return status; - } - - if (mbcp->mbox_out[0] == MB_CMD_STS_INVLD_CMD) { - netif_err(qdev, drv, qdev->ndev, - "Command not supported by firmware.\n"); - status = -EINVAL; - } else if (mbcp->mbox_out[0] == MB_CMD_STS_ERR) { - netif_err(qdev, drv, qdev->ndev, - "Failed to get MPI traffic control.\n"); - status = -EIO; - } - return status; -} - -int ql_wait_fifo_empty(struct ql_adapter *qdev) -{ - int count = 5; - u32 mgmnt_fifo_empty; - u32 nic_fifo_empty; - - do { - nic_fifo_empty = ql_read32(qdev, STS) & STS_NFE; - ql_mb_get_mgmnt_traffic_ctl(qdev, &mgmnt_fifo_empty); - mgmnt_fifo_empty &= MB_GET_MPI_TFK_FIFO_EMPTY; - if (nic_fifo_empty && mgmnt_fifo_empty) - return 0; - msleep(100); - } while (count-- > 0); - return -ETIMEDOUT; -} - -/* API called in work thread context to set new TX/RX - * maximum frame size values to match MTU. - */ -static int ql_set_port_cfg(struct ql_adapter *qdev) -{ - int status; - status = ql_mb_set_port_cfg(qdev); - if (status) - return status; - status = ql_idc_wait(qdev); - return status; -} - -/* The following routines are worker threads that process - * events that may sleep waiting for completion. - */ - -/* This thread gets the maximum TX and RX frame size values - * from the firmware and, if necessary, changes them to match - * the MTU setting. - */ -void ql_mpi_port_cfg_work(struct work_struct *work) -{ - struct ql_adapter *qdev = - container_of(work, struct ql_adapter, mpi_port_cfg_work.work); - int status; - - status = ql_mb_get_port_cfg(qdev); - if (status) { - netif_err(qdev, drv, qdev->ndev, - "Bug: Failed to get port config data.\n"); - goto err; - } - - if (qdev->link_config & CFG_JUMBO_FRAME_SIZE && - qdev->max_frame_size == - CFG_DEFAULT_MAX_FRAME_SIZE) - goto end; - - qdev->link_config |= CFG_JUMBO_FRAME_SIZE; - qdev->max_frame_size = CFG_DEFAULT_MAX_FRAME_SIZE; - status = ql_set_port_cfg(qdev); - if (status) { - netif_err(qdev, drv, qdev->ndev, - "Bug: Failed to set port config data.\n"); - goto err; - } -end: - clear_bit(QL_PORT_CFG, &qdev->flags); - return; -err: - ql_queue_fw_error(qdev); - goto end; -} - -/* Process an inter-device request. This is issues by - * the firmware in response to another function requesting - * a change to the port. We set a flag to indicate a change - * has been made and then send a mailbox command ACKing - * the change request. - */ -void ql_mpi_idc_work(struct work_struct *work) -{ - struct ql_adapter *qdev = - container_of(work, struct ql_adapter, mpi_idc_work.work); - int status; - struct mbox_params *mbcp = &qdev->idc_mbc; - u32 aen; - int timeout; - - aen = mbcp->mbox_out[1] >> 16; - timeout = (mbcp->mbox_out[1] >> 8) & 0xf; - - switch (aen) { - default: - netif_err(qdev, drv, qdev->ndev, - "Bug: Unhandled IDC action.\n"); - break; - case MB_CMD_PORT_RESET: - case MB_CMD_STOP_FW: - ql_link_off(qdev); - /* Fall through */ - case MB_CMD_SET_PORT_CFG: - /* Signal the resulting link up AEN - * that the frame routing and mac addr - * needs to be set. - * */ - set_bit(QL_CAM_RT_SET, &qdev->flags); - /* Do ACK if required */ - if (timeout) { - status = ql_mb_idc_ack(qdev); - if (status) - netif_err(qdev, drv, qdev->ndev, - "Bug: No pending IDC!\n"); - } else { - netif_printk(qdev, drv, KERN_DEBUG, qdev->ndev, - "IDC ACK not required\n"); - status = 0; /* success */ - } - break; - - /* These sub-commands issued by another (FCoE) - * function are requesting to do an operation - * on the shared resource (MPI environment). - * We currently don't issue these so we just - * ACK the request. - */ - case MB_CMD_IOP_RESTART_MPI: - case MB_CMD_IOP_PREP_LINK_DOWN: - /* Drop the link, reload the routing - * table when link comes up. - */ - ql_link_off(qdev); - set_bit(QL_CAM_RT_SET, &qdev->flags); - /* Fall through. */ - case MB_CMD_IOP_DVR_START: - case MB_CMD_IOP_FLASH_ACC: - case MB_CMD_IOP_CORE_DUMP_MPI: - case MB_CMD_IOP_PREP_UPDATE_MPI: - case MB_CMD_IOP_COMP_UPDATE_MPI: - case MB_CMD_IOP_NONE: /* an IDC without params */ - /* Do ACK if required */ - if (timeout) { - status = ql_mb_idc_ack(qdev); - if (status) - netif_err(qdev, drv, qdev->ndev, - "Bug: No pending IDC!\n"); - } else { - netif_printk(qdev, drv, KERN_DEBUG, qdev->ndev, - "IDC ACK not required\n"); - status = 0; /* success */ - } - break; - } -} - -void ql_mpi_work(struct work_struct *work) -{ - struct ql_adapter *qdev = - container_of(work, struct ql_adapter, mpi_work.work); - struct mbox_params mbc; - struct mbox_params *mbcp = &mbc; - int err = 0; - - mutex_lock(&qdev->mpi_mutex); - /* Begin polled mode for MPI */ - ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16)); - - while (ql_read32(qdev, STS) & STS_PI) { - memset(mbcp, 0, sizeof(struct mbox_params)); - mbcp->out_count = 1; - /* Don't continue if an async event - * did not complete properly. - */ - err = ql_mpi_handler(qdev, mbcp); - if (err) - break; - } - - /* End polled mode for MPI */ - ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI); - mutex_unlock(&qdev->mpi_mutex); - ql_enable_completion_interrupt(qdev, 0); -} - -void ql_mpi_reset_work(struct work_struct *work) -{ - struct ql_adapter *qdev = - container_of(work, struct ql_adapter, mpi_reset_work.work); - cancel_delayed_work_sync(&qdev->mpi_work); - cancel_delayed_work_sync(&qdev->mpi_port_cfg_work); - cancel_delayed_work_sync(&qdev->mpi_idc_work); - /* If we're not the dominant NIC function, - * then there is nothing to do. - */ - if (!ql_own_firmware(qdev)) { - netif_err(qdev, drv, qdev->ndev, "Don't own firmware!\n"); - return; - } - - if (qdev->mpi_coredump && !ql_core_dump(qdev, qdev->mpi_coredump)) { - netif_err(qdev, drv, qdev->ndev, "Core is dumped!\n"); - qdev->core_is_dumped = 1; - queue_delayed_work(qdev->workqueue, - &qdev->mpi_core_to_log, 5 * HZ); - } - ql_soft_reset_mpi_risc(qdev); -} |