aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c')
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c132
1 files changed, 58 insertions, 74 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index b0344c213752..db157a47000c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -13,10 +13,6 @@
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
The full GNU General Public License is included in this distribution in
the file called "COPYING".
@@ -24,13 +20,14 @@
Maintainer: Giuseppe Cavallaro <peppe.cavallaro@st.com>
*******************************************************************************/
+#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/mii.h>
-#include <linux/phy.h>
-#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/of_mdio.h>
-#include <asm/io.h>
+#include <linux/phy.h>
+#include <linux/slab.h>
#include "stmmac.h"
@@ -42,22 +39,6 @@
#define MII_GMAC4_WRITE (1 << MII_GMAC4_GOC_SHIFT)
#define MII_GMAC4_READ (3 << MII_GMAC4_GOC_SHIFT)
-static int stmmac_mdio_busy_wait(void __iomem *ioaddr, unsigned int mii_addr)
-{
- unsigned long curr;
- unsigned long finish = jiffies + 3 * HZ;
-
- do {
- curr = jiffies;
- if (readl(ioaddr + mii_addr) & MII_BUSY)
- cpu_relax();
- else
- return 0;
- } while (!time_after_eq(curr, finish));
-
- return -EBUSY;
-}
-
/**
* stmmac_mdio_read
* @bus: points to the mii_bus structure
@@ -74,7 +55,7 @@ static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
struct stmmac_priv *priv = netdev_priv(ndev);
unsigned int mii_address = priv->hw->mii.addr;
unsigned int mii_data = priv->hw->mii.data;
-
+ u32 v;
int data;
u32 value = MII_BUSY;
@@ -86,12 +67,14 @@ static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
if (priv->plat->has_gmac4)
value |= MII_GMAC4_READ;
- if (stmmac_mdio_busy_wait(priv->ioaddr, mii_address))
+ if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
+ 100, 10000))
return -EBUSY;
writel(value, priv->ioaddr + mii_address);
- if (stmmac_mdio_busy_wait(priv->ioaddr, mii_address))
+ if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
+ 100, 10000))
return -EBUSY;
/* Read the data from the MII data register */
@@ -115,7 +98,7 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
struct stmmac_priv *priv = netdev_priv(ndev);
unsigned int mii_address = priv->hw->mii.addr;
unsigned int mii_data = priv->hw->mii.data;
-
+ u32 v;
u32 value = MII_BUSY;
value |= (phyaddr << priv->hw->mii.addr_shift)
@@ -130,7 +113,8 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
value |= MII_WRITE;
/* Wait until any existing MII operation is complete */
- if (stmmac_mdio_busy_wait(priv->ioaddr, mii_address))
+ if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
+ 100, 10000))
return -EBUSY;
/* Set the MII address register to write */
@@ -138,7 +122,8 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
writel(value, priv->ioaddr + mii_address);
/* Wait until any existing MII operation is complete */
- return stmmac_mdio_busy_wait(priv->ioaddr, mii_address);
+ return readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
+ 100, 10000);
}
/**
@@ -156,9 +141,9 @@ int stmmac_mdio_reset(struct mii_bus *bus)
#ifdef CONFIG_OF
if (priv->device->of_node) {
-
if (data->reset_gpio < 0) {
struct device_node *np = priv->device->of_node;
+
if (!np)
return 0;
@@ -198,7 +183,7 @@ int stmmac_mdio_reset(struct mii_bus *bus)
/* This is a workaround for problems with the STE101P PHY.
* It doesn't complete its reset until at least one clock cycle
- * on MDC, so perform a dummy mdio read. To be upadted for GMAC4
+ * on MDC, so perform a dummy mdio read. To be updated for GMAC4
* if needed.
*/
if (!priv->plat->has_gmac4)
@@ -225,7 +210,7 @@ int stmmac_mdio_register(struct net_device *ndev)
return 0;
new_bus = mdiobus_alloc();
- if (new_bus == NULL)
+ if (!new_bus)
return -ENOMEM;
if (mdio_bus_data->irqs)
@@ -262,49 +247,48 @@ int stmmac_mdio_register(struct net_device *ndev)
found = 0;
for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
struct phy_device *phydev = mdiobus_get_phy(new_bus, addr);
- if (phydev) {
- int act = 0;
- char irq_num[4];
- char *irq_str;
-
- /*
- * If an IRQ was provided to be assigned after
- * the bus probe, do it here.
- */
- if ((mdio_bus_data->irqs == NULL) &&
- (mdio_bus_data->probed_phy_irq > 0)) {
- new_bus->irq[addr] =
- mdio_bus_data->probed_phy_irq;
- phydev->irq = mdio_bus_data->probed_phy_irq;
- }
-
- /*
- * If we're going to bind the MAC to this PHY bus,
- * and no PHY number was provided to the MAC,
- * use the one probed here.
- */
- if (priv->plat->phy_addr == -1)
- priv->plat->phy_addr = addr;
-
- act = (priv->plat->phy_addr == addr);
- switch (phydev->irq) {
- case PHY_POLL:
- irq_str = "POLL";
- break;
- case PHY_IGNORE_INTERRUPT:
- irq_str = "IGNORE";
- break;
- default:
- sprintf(irq_num, "%d", phydev->irq);
- irq_str = irq_num;
- break;
- }
- netdev_info(ndev, "PHY ID %08x at %d IRQ %s (%s)%s\n",
- phydev->phy_id, addr,
- irq_str, phydev_name(phydev),
- act ? " active" : "");
- found = 1;
+ int act = 0;
+ char irq_num[4];
+ char *irq_str;
+
+ if (!phydev)
+ continue;
+
+ /*
+ * If an IRQ was provided to be assigned after
+ * the bus probe, do it here.
+ */
+ if (!mdio_bus_data->irqs &&
+ (mdio_bus_data->probed_phy_irq > 0)) {
+ new_bus->irq[addr] = mdio_bus_data->probed_phy_irq;
+ phydev->irq = mdio_bus_data->probed_phy_irq;
+ }
+
+ /*
+ * If we're going to bind the MAC to this PHY bus,
+ * and no PHY number was provided to the MAC,
+ * use the one probed here.
+ */
+ if (priv->plat->phy_addr == -1)
+ priv->plat->phy_addr = addr;
+
+ act = (priv->plat->phy_addr == addr);
+ switch (phydev->irq) {
+ case PHY_POLL:
+ irq_str = "POLL";
+ break;
+ case PHY_IGNORE_INTERRUPT:
+ irq_str = "IGNORE";
+ break;
+ default:
+ sprintf(irq_num, "%d", phydev->irq);
+ irq_str = irq_num;
+ break;
}
+ netdev_info(ndev, "PHY ID %08x at %d IRQ %s (%s)%s\n",
+ phydev->phy_id, addr, irq_str, phydev_name(phydev),
+ act ? " active" : "");
+ found = 1;
}
if (!found && !mdio_node) {
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.