diff options
Diffstat (limited to 'drivers/net/ethernet/stmicro')
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 58 |
1 files changed, 48 insertions, 10 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c index 40c42637ad75..cfe5d8b73142 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c @@ -41,20 +41,32 @@ #define MII_XGMAC_BUSY BIT(22) #define MII_XGMAC_MAX_C22ADDR 3 #define MII_XGMAC_C22P_MASK GENMASK(MII_XGMAC_MAX_C22ADDR, 0) +#define MII_XGMAC_PA_SHIFT 16 +#define MII_XGMAC_DA_SHIFT 21 + +static int stmmac_xgmac2_c45_format(struct stmmac_priv *priv, int phyaddr, + int phyreg, u32 *hw_addr) +{ + u32 tmp; + + /* Set port as Clause 45 */ + tmp = readl(priv->ioaddr + XGMAC_MDIO_C22P); + tmp &= ~BIT(phyaddr); + writel(tmp, priv->ioaddr + XGMAC_MDIO_C22P); + + *hw_addr = (phyaddr << MII_XGMAC_PA_SHIFT) | (phyreg & 0xffff); + *hw_addr |= (phyreg >> MII_DEVADDR_C45_SHIFT) << MII_XGMAC_DA_SHIFT; + return 0; +} static int stmmac_xgmac2_c22_format(struct stmmac_priv *priv, int phyaddr, int phyreg, u32 *hw_addr) { - unsigned int mii_data = priv->hw->mii.data; u32 tmp; /* HW does not support C22 addr >= 4 */ if (phyaddr > MII_XGMAC_MAX_C22ADDR) return -ENODEV; - /* Wait until any existing MII operation is complete */ - if (readl_poll_timeout(priv->ioaddr + mii_data, tmp, - !(tmp & MII_XGMAC_BUSY), 100, 10000)) - return -EBUSY; /* Set port as Clause 22 */ tmp = readl(priv->ioaddr + XGMAC_MDIO_C22P); @@ -62,7 +74,7 @@ static int stmmac_xgmac2_c22_format(struct stmmac_priv *priv, int phyaddr, tmp |= BIT(phyaddr); writel(tmp, priv->ioaddr + XGMAC_MDIO_C22P); - *hw_addr = (phyaddr << 16) | (phyreg & 0x1f); + *hw_addr = (phyaddr << MII_XGMAC_PA_SHIFT) | (phyreg & 0x1f); return 0; } @@ -75,17 +87,28 @@ static int stmmac_xgmac2_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg) u32 tmp, addr, value = MII_XGMAC_BUSY; int ret; + /* Wait until any existing MII operation is complete */ + if (readl_poll_timeout(priv->ioaddr + mii_data, tmp, + !(tmp & MII_XGMAC_BUSY), 100, 10000)) + return -EBUSY; + if (phyreg & MII_ADDR_C45) { - return -EOPNOTSUPP; + phyreg &= ~MII_ADDR_C45; + + ret = stmmac_xgmac2_c45_format(priv, phyaddr, phyreg, &addr); + if (ret) + return ret; } else { ret = stmmac_xgmac2_c22_format(priv, phyaddr, phyreg, &addr); if (ret) return ret; + + value |= MII_XGMAC_SADDR; } value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift) & priv->hw->mii.clk_csr_mask; - value |= MII_XGMAC_SADDR | MII_XGMAC_READ; + value |= MII_XGMAC_READ; /* Wait until any existing MII operation is complete */ if (readl_poll_timeout(priv->ioaddr + mii_data, tmp, @@ -115,17 +138,28 @@ static int stmmac_xgmac2_mdio_write(struct mii_bus *bus, int phyaddr, u32 addr, tmp, value = MII_XGMAC_BUSY; int ret; + /* Wait until any existing MII operation is complete */ + if (readl_poll_timeout(priv->ioaddr + mii_data, tmp, + !(tmp & MII_XGMAC_BUSY), 100, 10000)) + return -EBUSY; + if (phyreg & MII_ADDR_C45) { - return -EOPNOTSUPP; + phyreg &= ~MII_ADDR_C45; + + ret = stmmac_xgmac2_c45_format(priv, phyaddr, phyreg, &addr); + if (ret) + return ret; } else { ret = stmmac_xgmac2_c22_format(priv, phyaddr, phyreg, &addr); if (ret) return ret; + + value |= MII_XGMAC_SADDR; } value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift) & priv->hw->mii.clk_csr_mask; - value |= phydata | MII_XGMAC_SADDR; + value |= phydata; value |= MII_XGMAC_WRITE; /* Wait until any existing MII operation is complete */ @@ -363,6 +397,10 @@ int stmmac_mdio_register(struct net_device *ndev) goto bus_register_fail; } + /* Looks like we need a dummy read for XGMAC only and C45 PHYs */ + if (priv->plat->has_xgmac) + stmmac_xgmac2_mdio_read(new_bus, 0, MII_ADDR_C45); + if (priv->plat->phy_node || mdio_node) goto bus_register_done; |