diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/net/ethernet/xilinx/xilinx_axienet.h | 29 |
1 files changed, 18 insertions, 11 deletions
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h index a03c3ca1b28d..1e966a39967e 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet.h +++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h @@ -339,6 +339,10 @@ #define DELAY_OF_ONE_MILLISEC 1000 +/* Xilinx PCS/PMA PHY register for switching 1000BaseX or SGMII */ +#define XLNX_MII_STD_SELECT_REG 0x11 +#define XLNX_MII_STD_SELECT_SGMII BIT(0) + /** * struct axidma_bd - Axi Dma buffer descriptor layout * @next: MM2S/S2MM Next Descriptor Pointer @@ -377,22 +381,29 @@ struct axidma_bd { * @ndev: Pointer for net_device to which it will be attached. * @dev: Pointer to device structure * @phy_node: Pointer to device node structure + * @phylink: Pointer to phylink instance + * @phylink_config: phylink configuration settings + * @pcs_phy: Reference to PCS/PMA PHY if used + * @switch_x_sgmii: Whether switchable 1000BaseX/SGMII mode is enabled in the core + * @clk: Clock for AXI bus * @mii_bus: Pointer to MII bus structure * @mii_clk_div: MII bus clock divider value * @regs_start: Resource start for axienet device addresses * @regs: Base address for the axienet_local device address space * @dma_regs: Base address for the axidma device address space - * @dma_err_tasklet: Tasklet structure to process Axi DMA errors + * @dma_err_task: Work structure to process Axi DMA errors * @tx_irq: Axidma TX IRQ number * @rx_irq: Axidma RX IRQ number + * @eth_irq: Ethernet core IRQ number * @phy_mode: Phy type to identify between MII/GMII/RGMII/SGMII/1000 Base-X * @options: AxiEthernet option word - * @last_link: Phy link state in which the PHY was negotiated earlier * @features: Stores the extended features supported by the axienet hw * @tx_bd_v: Virtual address of the TX buffer descriptor ring * @tx_bd_p: Physical address(start address) of the TX buffer descr. ring + * @tx_bd_num: Size of TX buffer descriptor ring * @rx_bd_v: Virtual address of the RX buffer descriptor ring * @rx_bd_p: Physical address(start address) of the RX buffer descr. ring + * @rx_bd_num: Size of RX buffer descriptor ring * @tx_bd_ci: Stores the index of the Tx buffer descriptor in the ring being * accessed currently. Used while alloc. BDs before a TX starts * @tx_bd_tail: Stores the index of the Tx buffer descriptor in the ring being @@ -414,23 +425,20 @@ struct axienet_local { struct net_device *ndev; struct device *dev; - /* Connection to PHY device */ struct device_node *phy_node; struct phylink *phylink; struct phylink_config phylink_config; - /* Reference to PCS/PMA PHY if used */ struct mdio_device *pcs_phy; - /* Clock for AXI bus */ + bool switch_x_sgmii; + struct clk *clk; - /* MDIO bus data */ - struct mii_bus *mii_bus; /* MII bus reference */ - u8 mii_clk_div; /* MII bus clock divider value */ + struct mii_bus *mii_bus; + u8 mii_clk_div; - /* IO registers, dma functions and IRQs */ resource_size_t regs_start; void __iomem *regs; void __iomem *dma_regs; @@ -442,10 +450,9 @@ struct axienet_local { int eth_irq; phy_interface_t phy_mode; - u32 options; /* Current options word */ + u32 options; u32 features; - /* Buffer descriptors */ struct axidma_bd *tx_bd_v; dma_addr_t tx_bd_p; u32 tx_bd_num; |