diff options
Diffstat (limited to 'drivers/net/ethernet/xilinx')
| -rw-r--r-- | drivers/net/ethernet/xilinx/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/xilinx/xilinx_axienet.h | 5 | ||||
| -rw-r--r-- | drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 115 | ||||
| -rw-r--r-- | drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c | 56 | ||||
| -rw-r--r-- | drivers/net/ethernet/xilinx/xilinx_emaclite.c | 14 |
5 files changed, 131 insertions, 61 deletions
diff --git a/drivers/net/ethernet/xilinx/Kconfig b/drivers/net/ethernet/xilinx/Kconfig index d0d0d4fe9d40..3b2137d1f4c6 100644 --- a/drivers/net/ethernet/xilinx/Kconfig +++ b/drivers/net/ethernet/xilinx/Kconfig @@ -18,7 +18,7 @@ if NET_VENDOR_XILINX config XILINX_EMACLITE tristate "Xilinx 10/100 Ethernet Lite support" - depends on PPC32 || MICROBLAZE || ARCH_ZYNQ || MIPS + depends on PPC32 || MICROBLAZE || ARCH_ZYNQ || MIPS || COMPILE_TEST select PHYLIB help This driver supports the 10/100 Ethernet Lite from Xilinx. diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h index f34c7903ff52..a03c3ca1b28d 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet.h +++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h @@ -378,6 +378,7 @@ struct axidma_bd { * @dev: Pointer to device structure * @phy_node: Pointer to device node structure * @mii_bus: Pointer to MII bus structure + * @mii_clk_div: MII bus clock divider value * @regs_start: Resource start for axienet device addresses * @regs: Base address for the axienet_local device address space * @dma_regs: Base address for the axidma device address space @@ -419,11 +420,15 @@ struct axienet_local { struct phylink *phylink; struct phylink_config phylink_config; + /* Reference to PCS/PMA PHY if used */ + struct mdio_device *pcs_phy; + /* Clock for AXI bus */ struct clk *clk; /* MDIO bus data */ struct mii_bus *mii_bus; /* MII bus reference */ + u8 mii_clk_div; /* MII bus clock divider value */ /* IO registers, dma functions and IRQs */ resource_size_t regs_start; diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index 9aafd3ecdaa4..6fea980acf64 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -1049,20 +1049,13 @@ static int axienet_open(struct net_device *ndev) dev_dbg(&ndev->dev, "axienet_open()\n"); - /* Disable the MDIO interface till Axi Ethernet Reset is completed. - * When we do an Axi Ethernet reset, it resets the complete core - * including the MDIO. MDIO must be disabled before resetting - * and re-enabled afterwards. + /* When we do an Axi Ethernet reset, it resets the complete core + * including the MDIO. MDIO must be disabled before resetting. * Hold MDIO bus lock to avoid MDIO accesses during the reset. */ mutex_lock(&lp->mii_bus->mdio_lock); - axienet_mdio_disable(lp); ret = axienet_device_reset(ndev); - if (ret == 0) - ret = axienet_mdio_enable(lp); mutex_unlock(&lp->mii_bus->mdio_lock); - if (ret < 0) - return ret; ret = phylink_of_phy_connect(lp->phylink, lp->dev->of_node, 0); if (ret) { @@ -1156,9 +1149,7 @@ static int axienet_stop(struct net_device *ndev) /* Do a reset to ensure DMA is really stopped */ mutex_lock(&lp->mii_bus->mdio_lock); - axienet_mdio_disable(lp); __axienet_device_reset(lp); - axienet_mdio_enable(lp); mutex_unlock(&lp->mii_bus->mdio_lock); cancel_work_sync(&lp->dma_err_task); @@ -1517,10 +1508,27 @@ static void axienet_validate(struct phylink_config *config, phylink_set(mask, Asym_Pause); phylink_set(mask, Pause); - phylink_set(mask, 1000baseX_Full); - phylink_set(mask, 10baseT_Full); - phylink_set(mask, 100baseT_Full); - phylink_set(mask, 1000baseT_Full); + + switch (state->interface) { + case PHY_INTERFACE_MODE_NA: + case PHY_INTERFACE_MODE_1000BASEX: + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_GMII: + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + phylink_set(mask, 1000baseX_Full); + phylink_set(mask, 1000baseT_Full); + if (state->interface == PHY_INTERFACE_MODE_1000BASEX) + break; + fallthrough; + case PHY_INTERFACE_MODE_MII: + phylink_set(mask, 100baseT_Full); + phylink_set(mask, 10baseT_Full); + default: + break; + } bitmap_and(supported, supported, mask, __ETHTOOL_LINK_MODE_MASK_NBITS); @@ -1533,38 +1541,46 @@ static void axienet_mac_pcs_get_state(struct phylink_config *config, { struct net_device *ndev = to_net_dev(config->dev); struct axienet_local *lp = netdev_priv(ndev); - u32 emmc_reg, fcc_reg; - - state->interface = lp->phy_mode; - emmc_reg = axienet_ior(lp, XAE_EMMC_OFFSET); - if (emmc_reg & XAE_EMMC_LINKSPD_1000) - state->speed = SPEED_1000; - else if (emmc_reg & XAE_EMMC_LINKSPD_100) - state->speed = SPEED_100; - else - state->speed = SPEED_10; - - state->pause = 0; - fcc_reg = axienet_ior(lp, XAE_FCC_OFFSET); - if (fcc_reg & XAE_FCC_FCTX_MASK) - state->pause |= MLO_PAUSE_TX; - if (fcc_reg & XAE_FCC_FCRX_MASK) - state->pause |= MLO_PAUSE_RX; - - state->an_complete = 0; - state->duplex = 1; + switch (state->interface) { + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_1000BASEX: + phylink_mii_c22_pcs_get_state(lp->pcs_phy, state); + break; + default: + break; + } } static void axienet_mac_an_restart(struct phylink_config *config) { - /* Unsupported, do nothing */ + struct net_device *ndev = to_net_dev(config->dev); + struct axienet_local *lp = netdev_priv(ndev); + + phylink_mii_c22_pcs_an_restart(lp->pcs_phy); } static void axienet_mac_config(struct phylink_config *config, unsigned int mode, const struct phylink_link_state *state) { - /* nothing meaningful to do */ + struct net_device *ndev = to_net_dev(config->dev); + struct axienet_local *lp = netdev_priv(ndev); + int ret; + + switch (state->interface) { + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_1000BASEX: + ret = phylink_mii_c22_pcs_config(lp->pcs_phy, mode, + state->interface, + state->advertising); + if (ret < 0) + netdev_warn(ndev, "Failed to configure PCS: %d\n", + ret); + break; + + default: + break; + } } static void axienet_mac_link_down(struct phylink_config *config, @@ -1644,16 +1660,12 @@ static void axienet_dma_err_handler(struct work_struct *work) axienet_setoptions(ndev, lp->options & ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN)); - /* Disable the MDIO interface till Axi Ethernet Reset is completed. - * When we do an Axi Ethernet reset, it resets the complete core - * including the MDIO. MDIO must be disabled before resetting - * and re-enabled afterwards. + /* When we do an Axi Ethernet reset, it resets the complete core + * including the MDIO. MDIO must be disabled before resetting. * Hold MDIO bus lock to avoid MDIO accesses during the reset. */ mutex_lock(&lp->mii_bus->mdio_lock); - axienet_mdio_disable(lp); __axienet_device_reset(lp); - axienet_mdio_enable(lp); mutex_unlock(&lp->mii_bus->mdio_lock); for (i = 0; i < lp->tx_bd_num; i++) { @@ -1999,6 +2011,20 @@ static int axienet_probe(struct platform_device *pdev) dev_warn(&pdev->dev, "error registering MDIO bus: %d\n", ret); } + if (lp->phy_mode == PHY_INTERFACE_MODE_SGMII || + lp->phy_mode == PHY_INTERFACE_MODE_1000BASEX) { + if (!lp->phy_node) { + dev_err(&pdev->dev, "phy-handle required for 1000BaseX/SGMII\n"); + ret = -EINVAL; + goto free_netdev; + } + lp->pcs_phy = of_mdio_find_device(lp->phy_node); + if (!lp->pcs_phy) { + ret = -EPROBE_DEFER; + goto free_netdev; + } + lp->phylink_config.pcs_poll = true; + } lp->phylink_config.dev = &ndev->dev; lp->phylink_config.type = PHYLINK_NETDEV; @@ -2036,6 +2062,9 @@ static int axienet_remove(struct platform_device *pdev) if (lp->phylink) phylink_destroy(lp->phylink); + if (lp->pcs_phy) + put_device(&lp->pcs_phy->dev); + axienet_mdio_teardown(lp); clk_disable_unprepare(lp->clk); diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c index 435ed308d990..9c014cee34b2 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c @@ -30,6 +30,23 @@ static int axienet_mdio_wait_until_ready(struct axienet_local *lp) 1, 20000); } +/* Enable the MDIO MDC. Called prior to a read/write operation */ +static void axienet_mdio_mdc_enable(struct axienet_local *lp) +{ + axienet_iow(lp, XAE_MDIO_MC_OFFSET, + ((u32)lp->mii_clk_div | XAE_MDIO_MC_MDIOEN_MASK)); +} + +/* Disable the MDIO MDC. Called after a read/write operation*/ +static void axienet_mdio_mdc_disable(struct axienet_local *lp) +{ + u32 mc_reg; + + mc_reg = axienet_ior(lp, XAE_MDIO_MC_OFFSET); + axienet_iow(lp, XAE_MDIO_MC_OFFSET, + (mc_reg & ~XAE_MDIO_MC_MDIOEN_MASK)); +} + /** * axienet_mdio_read - MDIO interface read function * @bus: Pointer to mii bus structure @@ -48,9 +65,13 @@ static int axienet_mdio_read(struct mii_bus *bus, int phy_id, int reg) int ret; struct axienet_local *lp = bus->priv; + axienet_mdio_mdc_enable(lp); + ret = axienet_mdio_wait_until_ready(lp); - if (ret < 0) + if (ret < 0) { + axienet_mdio_mdc_disable(lp); return ret; + } axienet_iow(lp, XAE_MDIO_MCR_OFFSET, (((phy_id << XAE_MDIO_MCR_PHYAD_SHIFT) & @@ -61,14 +82,17 @@ static int axienet_mdio_read(struct mii_bus *bus, int phy_id, int reg) XAE_MDIO_MCR_OP_READ_MASK)); ret = axienet_mdio_wait_until_ready(lp); - if (ret < 0) + if (ret < 0) { + axienet_mdio_mdc_disable(lp); return ret; + } rc = axienet_ior(lp, XAE_MDIO_MRD_OFFSET) & 0x0000FFFF; dev_dbg(lp->dev, "axienet_mdio_read(phy_id=%i, reg=%x) == %x\n", phy_id, reg, rc); + axienet_mdio_mdc_disable(lp); return rc; } @@ -94,9 +118,13 @@ static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg, dev_dbg(lp->dev, "axienet_mdio_write(phy_id=%i, reg=%x, val=%x)\n", phy_id, reg, val); + axienet_mdio_mdc_enable(lp); + ret = axienet_mdio_wait_until_ready(lp); - if (ret < 0) + if (ret < 0) { + axienet_mdio_mdc_disable(lp); return ret; + } axienet_iow(lp, XAE_MDIO_MWD_OFFSET, (u32) val); axienet_iow(lp, XAE_MDIO_MCR_OFFSET, @@ -108,8 +136,11 @@ static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg, XAE_MDIO_MCR_OP_WRITE_MASK)); ret = axienet_mdio_wait_until_ready(lp); - if (ret < 0) + if (ret < 0) { + axienet_mdio_mdc_disable(lp); return ret; + } + axienet_mdio_mdc_disable(lp); return 0; } @@ -124,7 +155,9 @@ static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg, **/ int axienet_mdio_enable(struct axienet_local *lp) { - u32 clk_div, host_clock; + u32 host_clock; + + lp->mii_clk_div = 0; if (lp->clk) { host_clock = clk_get_rate(lp->clk); @@ -176,19 +209,19 @@ int axienet_mdio_enable(struct axienet_local *lp) * "clock-frequency" from the CPU */ - clk_div = (host_clock / (MAX_MDIO_FREQ * 2)) - 1; + lp->mii_clk_div = (host_clock / (MAX_MDIO_FREQ * 2)) - 1; /* If there is any remainder from the division of * fHOST / (MAX_MDIO_FREQ * 2), then we need to add * 1 to the clock divisor or we will surely be above 2.5 MHz */ if (host_clock % (MAX_MDIO_FREQ * 2)) - clk_div++; + lp->mii_clk_div++; netdev_dbg(lp->ndev, "Setting MDIO clock divisor to %u/%u Hz host clock.\n", - clk_div, host_clock); + lp->mii_clk_div, host_clock); - axienet_iow(lp, XAE_MDIO_MC_OFFSET, clk_div | XAE_MDIO_MC_MDIOEN_MASK); + axienet_iow(lp, XAE_MDIO_MC_OFFSET, lp->mii_clk_div | XAE_MDIO_MC_MDIOEN_MASK); return axienet_mdio_wait_until_ready(lp); } @@ -211,8 +244,8 @@ void axienet_mdio_disable(struct axienet_local *lp) * Return: 0 on success, -ETIMEDOUT on a timeout, -ENOMEM when * mdiobus_alloc (to allocate memory for mii bus structure) fails. * - * Sets up the MDIO interface by initializing the MDIO clock and enabling the - * MDIO interface in hardware. Register the MDIO interface. + * Sets up the MDIO interface by initializing the MDIO clock. + * Register the MDIO interface. **/ int axienet_mdio_setup(struct axienet_local *lp) { @@ -246,6 +279,7 @@ int axienet_mdio_setup(struct axienet_local *lp) lp->mii_bus = NULL; return ret; } + axienet_mdio_mdc_disable(lp); return 0; } diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c index 0c26f5bcc523..008b9a40faad 100644 --- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c +++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c @@ -97,7 +97,7 @@ #define ALIGNMENT 4 /* BUFFER_ALIGN(adr) calculates the number of bytes to the next alignment. */ -#define BUFFER_ALIGN(adr) ((ALIGNMENT - ((u32)adr)) % ALIGNMENT) +#define BUFFER_ALIGN(adr) ((ALIGNMENT - ((uintptr_t)adr)) % ALIGNMENT) #ifdef __BIG_ENDIAN #define xemaclite_readl ioread32be @@ -338,7 +338,7 @@ static int xemaclite_send_data(struct net_local *drvdata, u8 *data, * if it is configured in HW */ - addr = (void __iomem __force *)((u32 __force)addr ^ + addr = (void __iomem __force *)((uintptr_t __force)addr ^ XEL_BUFFER_OFFSET); reg_data = xemaclite_readl(addr + XEL_TSR_OFFSET); @@ -399,8 +399,9 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data, int maxlen) * will correct on subsequent calls */ if (drvdata->rx_ping_pong != 0) - addr = (void __iomem __force *)((u32 __force)addr ^ - XEL_BUFFER_OFFSET); + addr = (void __iomem __force *) + ((uintptr_t __force)addr ^ + XEL_BUFFER_OFFSET); else return 0; /* No data was available */ @@ -518,6 +519,7 @@ static int xemaclite_set_mac_address(struct net_device *dev, void *address) /** * xemaclite_tx_timeout - Callback for Tx Timeout * @dev: Pointer to the network device + * @txqueue: Unused * * This function is called when Tx time out occurs for Emaclite device. */ @@ -1191,9 +1193,9 @@ static int xemaclite_of_probe(struct platform_device *ofdev) } dev_info(dev, - "Xilinx EmacLite at 0x%08X mapped to 0x%08X, irq=%d\n", + "Xilinx EmacLite at 0x%08X mapped to 0x%08lX, irq=%d\n", (unsigned int __force)ndev->mem_start, - (unsigned int __force)lp->base_addr, ndev->irq); + (unsigned long __force)lp->base_addr, ndev->irq); return 0; error: |