aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/irda/act200l.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/irda/act200l.c')
-rw-r--r--drivers/net/irda/act200l.c297
1 files changed, 0 insertions, 297 deletions
diff --git a/drivers/net/irda/act200l.c b/drivers/net/irda/act200l.c
deleted file mode 100644
index 756cd44e857a..000000000000
--- a/drivers/net/irda/act200l.c
+++ /dev/null
@@ -1,297 +0,0 @@
-/*********************************************************************
- *
- * Filename: act200l.c
- * Version: 0.8
- * Description: Implementation for the ACTiSYS ACT-IR200L dongle
- * Status: Experimental.
- * Author: SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>
- * Created at: Fri Aug 3 17:35:42 2001
- * Modified at: Fri Aug 17 10:22:40 2001
- * Modified by: SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>
- *
- * Copyright (c) 2001 SHIMIZU Takuya, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- ********************************************************************/
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/irda_device.h>
-
-static int act200l_reset(struct irda_task *task);
-static void act200l_open(dongle_t *self, struct qos_info *qos);
-static void act200l_close(dongle_t *self);
-static int act200l_change_speed(struct irda_task *task);
-
-/* Regsiter 0: Control register #1 */
-#define ACT200L_REG0 0x00
-#define ACT200L_TXEN 0x01 /* Enable transmitter */
-#define ACT200L_RXEN 0x02 /* Enable receiver */
-
-/* Register 1: Control register #2 */
-#define ACT200L_REG1 0x10
-#define ACT200L_LODB 0x01 /* Load new baud rate count value */
-#define ACT200L_WIDE 0x04 /* Expand the maximum allowable pulse */
-
-/* Register 4: Output Power register */
-#define ACT200L_REG4 0x40
-#define ACT200L_OP0 0x01 /* Enable LED1C output */
-#define ACT200L_OP1 0x02 /* Enable LED2C output */
-#define ACT200L_BLKR 0x04
-
-/* Register 5: Receive Mode register */
-#define ACT200L_REG5 0x50
-#define ACT200L_RWIDL 0x01 /* fixed 1.6us pulse mode */
-
-/* Register 6: Receive Sensitivity register #1 */
-#define ACT200L_REG6 0x60
-#define ACT200L_RS0 0x01 /* receive threshold bit 0 */
-#define ACT200L_RS1 0x02 /* receive threshold bit 1 */
-
-/* Register 7: Receive Sensitivity register #2 */
-#define ACT200L_REG7 0x70
-#define ACT200L_ENPOS 0x04 /* Ignore the falling edge */
-
-/* Register 8,9: Baud Rate Dvider register #1,#2 */
-#define ACT200L_REG8 0x80
-#define ACT200L_REG9 0x90
-
-#define ACT200L_2400 0x5f
-#define ACT200L_9600 0x17
-#define ACT200L_19200 0x0b
-#define ACT200L_38400 0x05
-#define ACT200L_57600 0x03
-#define ACT200L_115200 0x01
-
-/* Register 13: Control register #3 */
-#define ACT200L_REG13 0xd0
-#define ACT200L_SHDW 0x01 /* Enable access to shadow registers */
-
-/* Register 15: Status register */
-#define ACT200L_REG15 0xf0
-
-/* Register 21: Control register #4 */
-#define ACT200L_REG21 0x50
-#define ACT200L_EXCK 0x02 /* Disable clock output driver */
-#define ACT200L_OSCL 0x04 /* oscillator in low power, medium accuracy mode */
-
-static struct dongle_reg dongle = {
- .type = IRDA_ACT200L_DONGLE,
- .open = act200l_open,
- .close = act200l_close,
- .reset = act200l_reset,
- .change_speed = act200l_change_speed,
- .owner = THIS_MODULE,
-};
-
-static int __init act200l_init(void)
-{
- return irda_device_register_dongle(&dongle);
-}
-
-static void __exit act200l_cleanup(void)
-{
- irda_device_unregister_dongle(&dongle);
-}
-
-static void act200l_open(dongle_t *self, struct qos_info *qos)
-{
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
-
- /* Power on the dongle */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- /* Set the speeds we can accept */
- qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
- qos->min_turn_time.bits = 0x03;
-}
-
-static void act200l_close(dongle_t *self)
-{
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
-
- /* Power off the dongle */
- self->set_dtr_rts(self->dev, FALSE, FALSE);
-}
-
-/*
- * Function act200l_change_speed (dev, speed)
- *
- * Set the speed for the ACTiSYS ACT-IR200L type dongle.
- *
- */
-static int act200l_change_speed(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
- __u32 speed = (__u32) task->param;
- __u8 control[3];
- int ret = 0;
-
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
-
- self->speed_task = task;
-
- switch (task->state) {
- case IRDA_TASK_INIT:
- if (irda_task_execute(self, act200l_reset, NULL, task,
- (void *) speed))
- {
- /* Dongle need more time to reset */
- irda_task_next_state(task, IRDA_TASK_CHILD_WAIT);
-
- /* Give reset 1 sec to finish */
- ret = msecs_to_jiffies(1000);
- }
- break;
- case IRDA_TASK_CHILD_WAIT:
- IRDA_WARNING("%s(), resetting dongle timed out!\n",
- __FUNCTION__);
- ret = -1;
- break;
- case IRDA_TASK_CHILD_DONE:
- /* Clear DTR and set RTS to enter command mode */
- self->set_dtr_rts(self->dev, FALSE, TRUE);
-
- switch (speed) {
- case 9600:
- default:
- control[0] = ACT200L_REG8 | (ACT200L_9600 & 0x0f);
- control[1] = ACT200L_REG9 | ((ACT200L_9600 >> 4) & 0x0f);
- break;
- case 19200:
- control[0] = ACT200L_REG8 | (ACT200L_19200 & 0x0f);
- control[1] = ACT200L_REG9 | ((ACT200L_19200 >> 4) & 0x0f);
- break;
- case 38400:
- control[0] = ACT200L_REG8 | (ACT200L_38400 & 0x0f);
- control[1] = ACT200L_REG9 | ((ACT200L_38400 >> 4) & 0x0f);
- break;
- case 57600:
- control[0] = ACT200L_REG8 | (ACT200L_57600 & 0x0f);
- control[1] = ACT200L_REG9 | ((ACT200L_57600 >> 4) & 0x0f);
- break;
- case 115200:
- control[0] = ACT200L_REG8 | (ACT200L_115200 & 0x0f);
- control[1] = ACT200L_REG9 | ((ACT200L_115200 >> 4) & 0x0f);
- break;
- }
- control[2] = ACT200L_REG1 | ACT200L_LODB | ACT200L_WIDE;
-
- /* Write control bytes */
- self->write(self->dev, control, 3);
- irda_task_next_state(task, IRDA_TASK_WAIT);
- ret = msecs_to_jiffies(5);
- break;
- case IRDA_TASK_WAIT:
- /* Go back to normal mode */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->speed_task = NULL;
- break;
- default:
- IRDA_ERROR("%s(), unknown state %d\n",
- __FUNCTION__, task->state);
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->speed_task = NULL;
- ret = -1;
- break;
- }
- return ret;
-}
-
-/*
- * Function act200l_reset (driver)
- *
- * Reset the ACTiSYS ACT-IR200L type dongle.
- */
-static int act200l_reset(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
- __u8 control[9] = {
- ACT200L_REG15,
- ACT200L_REG13 | ACT200L_SHDW,
- ACT200L_REG21 | ACT200L_EXCK | ACT200L_OSCL,
- ACT200L_REG13,
- ACT200L_REG7 | ACT200L_ENPOS,
- ACT200L_REG6 | ACT200L_RS0 | ACT200L_RS1,
- ACT200L_REG5 | ACT200L_RWIDL,
- ACT200L_REG4 | ACT200L_OP0 | ACT200L_OP1 | ACT200L_BLKR,
- ACT200L_REG0 | ACT200L_TXEN | ACT200L_RXEN
- };
- int ret = 0;
-
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
-
- self->reset_task = task;
-
- switch (task->state) {
- case IRDA_TASK_INIT:
- /* Power on the dongle */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- irda_task_next_state(task, IRDA_TASK_WAIT1);
- ret = msecs_to_jiffies(50);
- break;
- case IRDA_TASK_WAIT1:
- /* Reset the dongle : set RTS low for 25 ms */
- self->set_dtr_rts(self->dev, TRUE, FALSE);
-
- irda_task_next_state(task, IRDA_TASK_WAIT2);
- ret = msecs_to_jiffies(50);
- break;
- case IRDA_TASK_WAIT2:
- /* Clear DTR and set RTS to enter command mode */
- self->set_dtr_rts(self->dev, FALSE, TRUE);
-
- /* Write control bytes */
- self->write(self->dev, control, 9);
- irda_task_next_state(task, IRDA_TASK_WAIT3);
- ret = msecs_to_jiffies(15);
- break;
- case IRDA_TASK_WAIT3:
- /* Go back to normal mode */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->reset_task = NULL;
- break;
- default:
- IRDA_ERROR("%s(), unknown state %d\n",
- __FUNCTION__, task->state);
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->reset_task = NULL;
- ret = -1;
- break;
- }
- return ret;
-}
-
-MODULE_AUTHOR("SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>");
-MODULE_DESCRIPTION("ACTiSYS ACT-IR200L dongle driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-10"); /* IRDA_ACT200L_DONGLE */
-
-/*
- * Function init_module (void)
- *
- * Initialize ACTiSYS ACT-IR200L module
- *
- */
-module_init(act200l_init);
-
-/*
- * Function cleanup_module (void)
- *
- * Cleanup ACTiSYS ACT-IR200L module
- *
- */
-module_exit(act200l_cleanup);
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.