aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/irda/nsc-ircc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/irda/nsc-ircc.c')
-rw-r--r--drivers/net/irda/nsc-ircc.c229
1 files changed, 111 insertions, 118 deletions
diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c
index 66bc03bdb138..e7317b104bfb 100644
--- a/drivers/net/irda/nsc-ircc.c
+++ b/drivers/net/irda/nsc-ircc.c
@@ -211,7 +211,8 @@ static int __init nsc_ircc_init(void)
ret = platform_driver_register(&nsc_ircc_driver);
if (ret) {
- IRDA_ERROR("%s, Can't register driver!\n", driver_name);
+ net_err_ratelimited("%s, Can't register driver!\n",
+ driver_name);
return ret;
}
@@ -225,8 +226,8 @@ static int __init nsc_ircc_init(void)
/* Probe for all the NSC chipsets we know about */
for (chip = chips; chip->name ; chip++) {
- IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __func__,
- chip->name);
+ pr_debug("%s(), Probing for %s ...\n", __func__,
+ chip->name);
/* Try all config registers for this chip */
for (cfg = 0; cfg < ARRAY_SIZE(chip->cfg); cfg++) {
@@ -237,7 +238,8 @@ static int __init nsc_ircc_init(void)
/* Read index register */
reg = inb(cfg_base);
if (reg == 0xff) {
- IRDA_DEBUG(2, "%s() no chip at 0x%03x\n", __func__, cfg_base);
+ pr_debug("%s() no chip at 0x%03x\n",
+ __func__, cfg_base);
continue;
}
@@ -245,8 +247,9 @@ static int __init nsc_ircc_init(void)
outb(chip->cid_index, cfg_base);
id = inb(cfg_base+1);
if ((id & chip->cid_mask) == chip->cid_value) {
- IRDA_DEBUG(2, "%s() Found %s chip, revision=%d\n",
- __func__, chip->name, id & ~chip->cid_mask);
+ pr_debug("%s() Found %s chip, revision=%d\n",
+ __func__, chip->name,
+ id & ~chip->cid_mask);
/*
* If we found a correct PnP setting,
@@ -260,7 +263,8 @@ static int __init nsc_ircc_init(void)
info.irq = pnp_info.irq;
if (info.fir_base < 0x2000) {
- IRDA_MESSAGE("%s, chip->init\n", driver_name);
+ net_info_ratelimited("%s, chip->init\n",
+ driver_name);
chip->init(chip, &info);
} else
chip->probe(chip, &info);
@@ -275,7 +279,8 @@ static int __init nsc_ircc_init(void)
* the chip.
*/
if (ret) {
- IRDA_DEBUG(2, "%s, PnP init failed\n", driver_name);
+ pr_debug("%s, PnP init failed\n",
+ driver_name);
memset(&info, 0, sizeof(chipio_t));
info.cfg_base = cfg_base;
info.fir_base = io[i];
@@ -297,7 +302,8 @@ static int __init nsc_ircc_init(void)
}
i++;
} else {
- IRDA_DEBUG(2, "%s(), Wrong chip id=0x%02x\n", __func__, id);
+ pr_debug("%s(), Wrong chip id=0x%02x\n",
+ __func__, id);
}
}
}
@@ -361,31 +367,29 @@ static int __init nsc_ircc_open(chipio_t *info)
void *ret;
int err, chip_index;
- IRDA_DEBUG(2, "%s()\n", __func__);
-
-
for (chip_index = 0; chip_index < ARRAY_SIZE(dev_self); chip_index++) {
if (!dev_self[chip_index])
break;
}
if (chip_index == ARRAY_SIZE(dev_self)) {
- IRDA_ERROR("%s(), maximum number of supported chips reached!\n", __func__);
+ net_err_ratelimited("%s(), maximum number of supported chips reached!\n",
+ __func__);
return -ENOMEM;
}
- IRDA_MESSAGE("%s, Found chip at base=0x%03x\n", driver_name,
- info->cfg_base);
+ net_info_ratelimited("%s, Found chip at base=0x%03x\n",
+ driver_name, info->cfg_base);
if ((nsc_ircc_setup(info)) == -1)
return -1;
- IRDA_MESSAGE("%s, driver loaded (Dag Brattli)\n", driver_name);
+ net_info_ratelimited("%s, driver loaded (Dag Brattli)\n", driver_name);
dev = alloc_irdadev(sizeof(struct nsc_ircc_cb));
if (dev == NULL) {
- IRDA_ERROR("%s(), can't allocate memory for "
- "control block!\n", __func__);
+ net_err_ratelimited("%s(), can't allocate memory for control block!\n",
+ __func__);
return -ENOMEM;
}
@@ -408,8 +412,8 @@ static int __init nsc_ircc_open(chipio_t *info)
/* Reserve the ioports that we need */
ret = request_region(self->io.fir_base, self->io.fir_ext, driver_name);
if (!ret) {
- IRDA_WARNING("%s(), can't get iobase of 0x%03x\n",
- __func__, self->io.fir_base);
+ net_warn_ratelimited("%s(), can't get iobase of 0x%03x\n",
+ __func__, self->io.fir_base);
err = -ENODEV;
goto out1;
}
@@ -460,21 +464,22 @@ static int __init nsc_ircc_open(chipio_t *info)
err = register_netdev(dev);
if (err) {
- IRDA_ERROR("%s(), register_netdev() failed!\n", __func__);
+ net_err_ratelimited("%s(), register_netdev() failed!\n",
+ __func__);
goto out4;
}
- IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name);
+ net_info_ratelimited("IrDA: Registered device %s\n", dev->name);
/* Check if user has supplied a valid dongle id or not */
if ((dongle_id <= 0) ||
(dongle_id >= ARRAY_SIZE(dongle_types))) {
dongle_id = nsc_ircc_read_dongle_id(self->io.fir_base);
- IRDA_MESSAGE("%s, Found dongle: %s\n", driver_name,
- dongle_types[dongle_id]);
+ net_info_ratelimited("%s, Found dongle: %s\n",
+ driver_name, dongle_types[dongle_id]);
} else {
- IRDA_MESSAGE("%s, Using dongle: %s\n", driver_name,
- dongle_types[dongle_id]);
+ net_info_ratelimited("%s, Using dongle: %s\n",
+ driver_name, dongle_types[dongle_id]);
}
self->io.dongle_id = dongle_id;
@@ -516,8 +521,6 @@ static int __exit nsc_ircc_close(struct nsc_ircc_cb *self)
{
int iobase;
- IRDA_DEBUG(4, "%s()\n", __func__);
-
IRDA_ASSERT(self != NULL, return -1;);
iobase = self->io.fir_base;
@@ -528,8 +531,8 @@ static int __exit nsc_ircc_close(struct nsc_ircc_cb *self)
unregister_netdev(self->netdev);
/* Release the PORT that this driver is using */
- IRDA_DEBUG(4, "%s(), Releasing Region %03x\n",
- __func__, self->io.fir_base);
+ pr_debug("%s(), Releasing Region %03x\n",
+ __func__, self->io.fir_base);
release_region(self->io.fir_base, self->io.fir_ext);
if (self->tx_buff.head)
@@ -567,7 +570,7 @@ static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info)
case 0x2e8: outb(0x15, cfg_base+1); break;
case 0x3f8: outb(0x16, cfg_base+1); break;
case 0x2f8: outb(0x17, cfg_base+1); break;
- default: IRDA_ERROR("%s(), invalid base_address", __func__);
+ default: net_err_ratelimited("%s(), invalid base_address\n", __func__);
}
/* Control Signal Routing Register (CSRT) */
@@ -579,7 +582,7 @@ static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info)
case 9: temp = 0x05; break;
case 11: temp = 0x06; break;
case 15: temp = 0x07; break;
- default: IRDA_ERROR("%s(), invalid irq", __func__);
+ default: net_err_ratelimited("%s(), invalid irq\n", __func__);
}
outb(CFG_108_CSRT, cfg_base);
@@ -587,7 +590,7 @@ static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info)
case 0: outb(0x08+temp, cfg_base+1); break;
case 1: outb(0x10+temp, cfg_base+1); break;
case 3: outb(0x18+temp, cfg_base+1); break;
- default: IRDA_ERROR("%s(), invalid dma", __func__);
+ default: net_err_ratelimited("%s(), invalid dma\n", __func__);
}
outb(CFG_108_MCTL, cfg_base); /* Mode Control Register (MCTL) */
@@ -626,8 +629,8 @@ static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info)
break;
}
info->sir_base = info->fir_base;
- IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __func__,
- info->fir_base);
+ pr_debug("%s(), probing fir_base=0x%03x\n", __func__,
+ info->fir_base);
/* Read control signals routing register (CSRT) */
outb(CFG_108_CSRT, cfg_base);
@@ -659,7 +662,7 @@ static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info)
info->irq = 15;
break;
}
- IRDA_DEBUG(2, "%s(), probing irq=%d\n", __func__, info->irq);
+ pr_debug("%s(), probing irq=%d\n", __func__, info->irq);
/* Currently we only read Rx DMA but it will also be used for Tx */
switch ((reg >> 3) & 0x03) {
@@ -676,7 +679,7 @@ static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info)
info->dma = 3;
break;
}
- IRDA_DEBUG(2, "%s(), probing dma=%d\n", __func__, info->dma);
+ pr_debug("%s(), probing dma=%d\n", __func__, info->dma);
/* Read mode control register (MCTL) */
outb(CFG_108_MCTL, cfg_base);
@@ -727,7 +730,7 @@ static int nsc_ircc_probe_338(nsc_chip_t *chip, chipio_t *info)
pnp = (reg >> 3) & 0x01;
if (pnp) {
- IRDA_DEBUG(2, "(), Chip is in PnP mode\n");
+ pr_debug("(), Chip is in PnP mode\n");
outb(0x46, cfg_base);
reg = (inb(cfg_base+1) & 0xfe) << 2;
@@ -831,9 +834,8 @@ static int nsc_ircc_init_39x(nsc_chip_t *chip, chipio_t *info)
int enabled;
/* User is sure about his config... accept it. */
- IRDA_DEBUG(2, "%s(): nsc_ircc_init_39x (user settings): "
- "io=0x%04x, irq=%d, dma=%d\n",
- __func__, info->fir_base, info->irq, info->dma);
+ pr_debug("%s(): nsc_ircc_init_39x (user settings): io=0x%04x, irq=%d, dma=%d\n",
+ __func__, info->fir_base, info->irq, info->dma);
/* Access bank for SP2 */
outb(CFG_39X_LDN, cfg_base);
@@ -873,8 +875,8 @@ static int nsc_ircc_probe_39x(nsc_chip_t *chip, chipio_t *info)
int reg1, reg2, irq, irqt, dma1, dma2;
int enabled, susp;
- IRDA_DEBUG(2, "%s(), nsc_ircc_probe_39x, base=%d\n",
- __func__, cfg_base);
+ pr_debug("%s(), nsc_ircc_probe_39x, base=%d\n",
+ __func__, cfg_base);
/* This function should be executed with irq off to avoid
* another driver messing with the Super I/O bank - Jean II */
@@ -908,7 +910,8 @@ static int nsc_ircc_probe_39x(nsc_chip_t *chip, chipio_t *info)
outb(CFG_39X_SPC, cfg_base);
susp = 1 - ((inb(cfg_base+1) & 0x02) >> 1);
- IRDA_DEBUG(2, "%s(): io=0x%02x%02x, irq=%d (type %d), rxdma=%d, txdma=%d, enabled=%d (suspended=%d)\n", __func__, reg1,reg2,irq,irqt,dma1,dma2,enabled,susp);
+ pr_debug("%s(): io=0x%02x%02x, irq=%d (type %d), rxdma=%d, txdma=%d, enabled=%d (suspended=%d)\n",
+ __func__, reg1, reg2, irq, irqt, dma1, dma2, enabled, susp);
/* Configure SP2 */
@@ -959,8 +962,8 @@ static int nsc_ircc_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *i
!(pnp_dma_flags(dev, 0) & IORESOURCE_DISABLED))
pnp_info.dma = pnp_dma(dev, 0);
- IRDA_DEBUG(0, "%s() : From PnP, found firbase 0x%03X ; irq %d ; dma %d.\n",
- __func__, pnp_info.fir_base, pnp_info.irq, pnp_info.dma);
+ pr_debug("%s() : From PnP, found firbase 0x%03X ; irq %d ; dma %d.\n",
+ __func__, pnp_info.fir_base, pnp_info.irq, pnp_info.dma);
if((pnp_info.fir_base == 0) ||
(pnp_info.irq == -1) || (pnp_info.dma == -1)) {
@@ -988,13 +991,13 @@ static int nsc_ircc_setup(chipio_t *info)
switch_bank(iobase, BANK3);
version = inb(iobase+MID);
- IRDA_DEBUG(2, "%s() Driver %s Found chip version %02x\n",
- __func__, driver_name, version);
+ pr_debug("%s() Driver %s Found chip version %02x\n",
+ __func__, driver_name, version);
/* Should be 0x2? */
if (0x20 != (version & 0xf0)) {
- IRDA_ERROR("%s, Wrong chip version %02x\n",
- driver_name, version);
+ net_err_ratelimited("%s, Wrong chip version %02x\n",
+ driver_name, version);
return -1;
}
@@ -1092,39 +1095,39 @@ static void nsc_ircc_init_dongle_interface (int iobase, int dongle_id)
switch (dongle_id) {
case 0x00: /* same as */
case 0x01: /* Differential serial interface */
- IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
- __func__, dongle_types[dongle_id]);
+ pr_debug("%s(), %s not defined by irda yet\n",
+ __func__, dongle_types[dongle_id]);
break;
case 0x02: /* same as */
case 0x03: /* Reserved */
- IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
- __func__, dongle_types[dongle_id]);
+ pr_debug("%s(), %s not defined by irda yet\n",
+ __func__, dongle_types[dongle_id]);
break;
case 0x04: /* Sharp RY5HD01 */
break;
case 0x05: /* Reserved, but this is what the Thinkpad reports */
- IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
- __func__, dongle_types[dongle_id]);
+ pr_debug("%s(), %s not defined by irda yet\n",
+ __func__, dongle_types[dongle_id]);
break;
case 0x06: /* Single-ended serial interface */
- IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
- __func__, dongle_types[dongle_id]);
+ pr_debug("%s(), %s not defined by irda yet\n",
+ __func__, dongle_types[dongle_id]);
break;
case 0x07: /* Consumer-IR only */
- IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
- __func__, dongle_types[dongle_id]);
+ pr_debug("%s(), %s is not for IrDA mode\n",
+ __func__, dongle_types[dongle_id]);
break;
case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */
- IRDA_DEBUG(0, "%s(), %s\n",
- __func__, dongle_types[dongle_id]);
+ pr_debug("%s(), %s\n",
+ __func__, dongle_types[dongle_id]);
break;
case 0x09: /* IBM31T1100 or Temic TFDS6000/TFDS6500 */
outb(0x28, iobase+7); /* Set irsl[0-2] as output */
break;
case 0x0A: /* same as */
case 0x0B: /* Reserved */
- IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
- __func__, dongle_types[dongle_id]);
+ pr_debug("%s(), %s not defined by irda yet\n",
+ __func__, dongle_types[dongle_id]);
break;
case 0x0C: /* same as */
case 0x0D: /* HP HSDL-1100/HSDL-2100 */
@@ -1138,15 +1141,15 @@ static void nsc_ircc_init_dongle_interface (int iobase, int dongle_id)
outb(0x28, iobase+7); /* Set irsl[0-2] as output */
break;
case 0x0F: /* No dongle connected */
- IRDA_DEBUG(0, "%s(), %s\n",
- __func__, dongle_types[dongle_id]);
+ pr_debug("%s(), %s\n",
+ __func__, dongle_types[dongle_id]);
switch_bank(iobase, BANK0);
outb(0x62, iobase+MCR);
break;
default:
- IRDA_DEBUG(0, "%s(), invalid dongle_id %#x",
- __func__, dongle_id);
+ pr_debug("%s(), invalid dongle_id %#x",
+ __func__, dongle_id);
}
/* IRCFG1: IRSL1 and 2 are set to IrDA mode */
@@ -1177,31 +1180,31 @@ static void nsc_ircc_change_dongle_speed(int iobase, int speed, int dongle_id)
switch (dongle_id) {
case 0x00: /* same as */
case 0x01: /* Differential serial interface */
- IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
- __func__, dongle_types[dongle_id]);
+ pr_debug("%s(), %s not defined by irda yet\n",
+ __func__, dongle_types[dongle_id]);
break;
case 0x02: /* same as */
case 0x03: /* Reserved */
- IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
- __func__, dongle_types[dongle_id]);
+ pr_debug("%s(), %s not defined by irda yet\n",
+ __func__, dongle_types[dongle_id]);
break;
case 0x04: /* Sharp RY5HD01 */
break;
case 0x05: /* Reserved */
- IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
- __func__, dongle_types[dongle_id]);
+ pr_debug("%s(), %s not defined by irda yet\n",
+ __func__, dongle_types[dongle_id]);
break;
case 0x06: /* Single-ended serial interface */
- IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
- __func__, dongle_types[dongle_id]);
+ pr_debug("%s(), %s not defined by irda yet\n",
+ __func__, dongle_types[dongle_id]);
break;
case 0x07: /* Consumer-IR only */
- IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
- __func__, dongle_types[dongle_id]);
+ pr_debug("%s(), %s is not for IrDA mode\n",
+ __func__, dongle_types[dongle_id]);
break;
case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */
- IRDA_DEBUG(0, "%s(), %s\n",
- __func__, dongle_types[dongle_id]);
+ pr_debug("%s(), %s\n",
+ __func__, dongle_types[dongle_id]);
outb(0x00, iobase+4);
if (speed > 115200)
outb(0x01, iobase+4);
@@ -1219,8 +1222,8 @@ static void nsc_ircc_change_dongle_speed(int iobase, int speed, int dongle_id)
break;
case 0x0A: /* same as */
case 0x0B: /* Reserved */
- IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
- __func__, dongle_types[dongle_id]);
+ pr_debug("%s(), %s not defined by irda yet\n",
+ __func__, dongle_types[dongle_id]);
break;
case 0x0C: /* same as */
case 0x0D: /* HP HSDL-1100/HSDL-2100 */
@@ -1228,14 +1231,14 @@ static void nsc_ircc_change_dongle_speed(int iobase, int speed, int dongle_id)
case 0x0E: /* Supports SIR Mode only */
break;
case 0x0F: /* No dongle connected */
- IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
- __func__, dongle_types[dongle_id]);
+ pr_debug("%s(), %s is not for IrDA mode\n",
+ __func__, dongle_types[dongle_id]);
switch_bank(iobase, BANK0);
outb(0x62, iobase+MCR);
break;
default:
- IRDA_DEBUG(0, "%s(), invalid data_rate\n", __func__);
+ pr_debug("%s(), invalid data_rate\n", __func__);
}
/* Restore bank register */
outb(bank, iobase+BSR);
@@ -1256,7 +1259,7 @@ static __u8 nsc_ircc_change_speed(struct nsc_ircc_cb *self, __u32 speed)
__u8 bank;
__u8 ier; /* Interrupt enable register */
- IRDA_DEBUG(2, "%s(), speed=%d\n", __func__, speed);
+ pr_debug("%s(), speed=%d\n", __func__, speed);
IRDA_ASSERT(self != NULL, return 0;);
@@ -1289,20 +1292,20 @@ static __u8 nsc_ircc_change_speed(struct nsc_ircc_cb *self, __u32 speed)
outb(inb(iobase+4) | 0x04, iobase+4);
mcr = MCR_MIR;
- IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __func__);
+ pr_debug("%s(), handling baud of 576000\n", __func__);
break;
case 1152000:
mcr = MCR_MIR;
- IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __func__);
+ pr_debug("%s(), handling baud of 1152000\n", __func__);
break;
case 4000000:
mcr = MCR_FIR;
- IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __func__);
+ pr_debug("%s(), handling baud of 4000000\n", __func__);
break;
default:
mcr = MCR_FIR;
- IRDA_DEBUG(0, "%s(), unknown baud rate of %d\n",
- __func__, speed);
+ pr_debug("%s(), unknown baud rate of %d\n",
+ __func__, speed);
break;
}
@@ -1609,15 +1612,13 @@ static int nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size)
int actual = 0;
__u8 bank;
- IRDA_DEBUG(4, "%s()\n", __func__);
-
/* Save current bank */
bank = inb(iobase+BSR);
switch_bank(iobase, BANK0);
if (!(inb_p(iobase+LSR) & LSR_TXEMP)) {
- IRDA_DEBUG(4, "%s(), warning, FIFO not empty yet!\n",
- __func__);
+ pr_debug("%s(), warning, FIFO not empty yet!\n",
+ __func__);
/* FIFO may still be filled to the Tx interrupt threshold */
fifo_size -= 17;
@@ -1629,8 +1630,8 @@ static int nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size)
outb(buf[actual++], iobase+TXD);
}
- IRDA_DEBUG(4, "%s(), fifo_size %d ; %d sent of %d\n",
- __func__, fifo_size, actual, len);
+ pr_debug("%s(), fifo_size %d ; %d sent of %d\n",
+ __func__, fifo_size, actual, len);
/* Restore bank */
outb(bank, iobase+BSR);
@@ -1651,8 +1652,6 @@ static int nsc_ircc_dma_xmit_complete(struct nsc_ircc_cb *self)
__u8 bank;
int ret = TRUE;
- IRDA_DEBUG(2, "%s()\n", __func__);
-
iobase = self->io.fir_base;
/* Save current bank */
@@ -1782,7 +1781,7 @@ static int nsc_ircc_dma_receive_complete(struct nsc_ircc_cb *self, int iobase)
len = inb(iobase+RFLFL) | ((inb(iobase+RFLFH) & 0x1f) << 8);
if (st_fifo->tail >= MAX_RX_WINDOW) {
- IRDA_DEBUG(0, "%s(), window is full!\n", __func__);
+ pr_debug("%s(), window is full!\n", __func__);
continue;
}
@@ -1872,9 +1871,6 @@ static int nsc_ircc_dma_receive_complete(struct nsc_ircc_cb *self, int iobase)
skb = dev_alloc_skb(len+1);
if (skb == NULL) {
- IRDA_WARNING("%s(), memory squeeze, "
- "dropping frame.\n",
- __func__);
self->netdev->stats.rx_dropped++;
/* Restore bank register */
@@ -1979,7 +1975,7 @@ static void nsc_ircc_sir_interrupt(struct nsc_ircc_cb *self, int eir)
* Need to be after self->io.direction to avoid race with
* nsc_ircc_hard_xmit_sir() - Jean II */
if (self->new_speed) {
- IRDA_DEBUG(2, "%s(), Changing speed!\n", __func__);
+ pr_debug("%s(), Changing speed!\n", __func__);
self->ier = nsc_ircc_change_speed(self,
self->new_speed);
self->new_speed = 0;
@@ -2063,9 +2059,8 @@ static void nsc_ircc_fir_interrupt(struct nsc_ircc_cb *self, int iobase,
nsc_ircc_dma_receive(self);
self->ier = IER_SFIF_IE;
} else
- IRDA_WARNING("%s(), potential "
- "Tx queue lockup !\n",
- __func__);
+ net_warn_ratelimited("%s(), potential Tx queue lockup !\n",
+ __func__);
}
} else {
/* Not finished yet, so interrupt on DMA again */
@@ -2174,7 +2169,6 @@ static int nsc_ircc_net_open(struct net_device *dev)
char hwname[32];
__u8 bank;
- IRDA_DEBUG(4, "%s()\n", __func__);
IRDA_ASSERT(dev != NULL, return -1;);
self = netdev_priv(dev);
@@ -2184,8 +2178,8 @@ static int nsc_ircc_net_open(struct net_device *dev)
iobase = self->io.fir_base;
if (request_irq(self->io.irq, nsc_ircc_interrupt, 0, dev->name, dev)) {
- IRDA_WARNING("%s, unable to allocate irq=%d\n",
- driver_name, self->io.irq);
+ net_warn_ratelimited("%s, unable to allocate irq=%d\n",
+ driver_name, self->io.irq);
return -EAGAIN;
}
/*
@@ -2193,8 +2187,8 @@ static int nsc_ircc_net_open(struct net_device *dev)
* failure.
*/
if (request_dma(self->io.dma, dev->name)) {
- IRDA_WARNING("%s, unable to allocate dma=%d\n",
- driver_name, self->io.dma);
+ net_warn_ratelimited("%s, unable to allocate dma=%d\n",
+ driver_name, self->io.dma);
free_irq(self->io.irq, dev);
return -EAGAIN;
}
@@ -2236,7 +2230,6 @@ static int nsc_ircc_net_close(struct net_device *dev)
int iobase;
__u8 bank;
- IRDA_DEBUG(4, "%s()\n", __func__);
IRDA_ASSERT(dev != NULL, return -1;);
@@ -2290,7 +2283,7 @@ static int nsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
IRDA_ASSERT(self != NULL, return -1;);
- IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
+ pr_debug("%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
switch (cmd) {
case SIOCSBANDWIDTH: /* Set bandwidth */
@@ -2329,7 +2322,7 @@ static int nsc_ircc_suspend(struct platform_device *dev, pm_message_t state)
if (self->io.suspended)
return 0;
- IRDA_DEBUG(1, "%s, Suspending\n", driver_name);
+ pr_debug("%s, Suspending\n", driver_name);
rtnl_lock();
if (netif_running(self->netdev)) {
@@ -2363,7 +2356,7 @@ static int nsc_ircc_resume(struct platform_device *dev)
if (!self->io.suspended)
return 0;
- IRDA_DEBUG(1, "%s, Waking up\n", driver_name);
+ pr_debug("%s, Waking up\n", driver_name);
rtnl_lock();
nsc_ircc_setup(&self->io);
@@ -2372,8 +2365,8 @@ static int nsc_ircc_resume(struct platform_device *dev)
if (netif_running(self->netdev)) {
if (request_irq(self->io.irq, nsc_ircc_interrupt, 0,
self->netdev->name, self->netdev)) {
- IRDA_WARNING("%s, unable to allocate irq=%d\n",
- driver_name, self->io.irq);
+ net_warn_ratelimited("%s, unable to allocate irq=%d\n",
+ driver_name, self->io.irq);
/*
* Don't fail resume process, just kill this
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.