diff options
Diffstat (limited to 'drivers/net/phy/dp83867.c')
| -rw-r--r-- | drivers/net/phy/dp83867.c | 62 |
1 files changed, 22 insertions, 40 deletions
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c index da6a67d47ce9..8448d01819ef 100644 --- a/drivers/net/phy/dp83867.c +++ b/drivers/net/phy/dp83867.c @@ -1,16 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Driver for the Texas Instruments DP83867 PHY * * Copyright (C) 2015 Texas Instruments Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/ethtool.h> @@ -19,6 +11,7 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/phy.h> +#include <linux/delay.h> #include <dt-bindings/net/ti-dp83867.h> @@ -135,17 +128,13 @@ static int dp83867_config_port_mirroring(struct phy_device *phydev) { struct dp83867_private *dp83867 = (struct dp83867_private *)phydev->priv; - u16 val; - - val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4); if (dp83867->port_mirroring == DP83867_PORT_MIRROING_EN) - val |= DP83867_CFG4_PORT_MIRROR_EN; + phy_set_bits_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4, + DP83867_CFG4_PORT_MIRROR_EN); else - val &= ~DP83867_CFG4_PORT_MIRROR_EN; - - phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4, val); - + phy_clear_bits_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4, + DP83867_CFG4_PORT_MIRROR_EN); return 0; } @@ -230,11 +219,9 @@ static int dp83867_config_init(struct phy_device *phydev) } /* RX_DV/RX_CTRL strapped in mode 1 or mode 2 workaround */ - if (dp83867->rxctrl_strap_quirk) { - val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4); - val &= ~BIT(7); - phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4, val); - } + if (dp83867->rxctrl_strap_quirk) + phy_clear_bits_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4, + BIT(7)); if (phy_interface_is_rgmii(phydev)) { val = phy_read(phydev, MII_DP83867_PHYCTRL); @@ -283,17 +270,11 @@ static int dp83867_config_init(struct phy_device *phydev) phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_RGMIIDCTL, delay); - if (dp83867->io_impedance >= 0) { - val = phy_read_mmd(phydev, DP83867_DEVADDR, - DP83867_IO_MUX_CFG); - - val &= ~DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL; - val |= dp83867->io_impedance & - DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL; - - phy_write_mmd(phydev, DP83867_DEVADDR, - DP83867_IO_MUX_CFG, val); - } + if (dp83867->io_impedance >= 0) + phy_modify_mmd(phydev, DP83867_DEVADDR, DP83867_IO_MUX_CFG, + DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL, + dp83867->io_impedance & + DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL); } /* Enable Interrupt output INT_OE in CFG3 register */ @@ -307,12 +288,11 @@ static int dp83867_config_init(struct phy_device *phydev) dp83867_config_port_mirroring(phydev); /* Clock output selection if muxing property is set */ - if (dp83867->clk_output_sel != DP83867_CLK_O_SEL_REF_CLK) { - val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_IO_MUX_CFG); - val &= ~DP83867_IO_MUX_CFG_CLK_O_SEL_MASK; - val |= (dp83867->clk_output_sel << DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT); - phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_IO_MUX_CFG, val); - } + if (dp83867->clk_output_sel != DP83867_CLK_O_SEL_REF_CLK) + phy_modify_mmd(phydev, DP83867_DEVADDR, DP83867_IO_MUX_CFG, + DP83867_IO_MUX_CFG_CLK_O_SEL_MASK, + dp83867->clk_output_sel << + DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT); return 0; } @@ -325,6 +305,8 @@ static int dp83867_phy_reset(struct phy_device *phydev) if (err < 0) return err; + usleep_range(10, 20); + return dp83867_config_init(phydev); } @@ -357,4 +339,4 @@ MODULE_DEVICE_TABLE(mdio, dp83867_tbl); MODULE_DESCRIPTION("Texas Instruments DP83867 PHY driver"); MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com"); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); |