diff options
Diffstat (limited to 'drivers/net/phy/dp83tc811.c')
| -rw-r--r-- | drivers/net/phy/dp83tc811.c | 347 |
1 files changed, 347 insertions, 0 deletions
diff --git a/drivers/net/phy/dp83tc811.c b/drivers/net/phy/dp83tc811.c new file mode 100644 index 000000000000..081d99aa3985 --- /dev/null +++ b/drivers/net/phy/dp83tc811.c @@ -0,0 +1,347 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for the Texas Instruments DP83TC811 PHY + * + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ + * + */ + +#include <linux/ethtool.h> +#include <linux/etherdevice.h> +#include <linux/kernel.h> +#include <linux/mii.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/phy.h> +#include <linux/netdevice.h> + +#define DP83TC811_PHY_ID 0x2000a253 +#define DP83811_DEVADDR 0x1f + +#define MII_DP83811_SGMII_CTRL 0x09 +#define MII_DP83811_INT_STAT1 0x12 +#define MII_DP83811_INT_STAT2 0x13 +#define MII_DP83811_RESET_CTRL 0x1f + +#define DP83811_HW_RESET BIT(15) +#define DP83811_SW_RESET BIT(14) + +/* INT_STAT1 bits */ +#define DP83811_RX_ERR_HF_INT_EN BIT(0) +#define DP83811_MS_TRAINING_INT_EN BIT(1) +#define DP83811_ANEG_COMPLETE_INT_EN BIT(2) +#define DP83811_ESD_EVENT_INT_EN BIT(3) +#define DP83811_WOL_INT_EN BIT(4) +#define DP83811_LINK_STAT_INT_EN BIT(5) +#define DP83811_ENERGY_DET_INT_EN BIT(6) +#define DP83811_LINK_QUAL_INT_EN BIT(7) + +/* INT_STAT2 bits */ +#define DP83811_JABBER_DET_INT_EN BIT(0) +#define DP83811_POLARITY_INT_EN BIT(1) +#define DP83811_SLEEP_MODE_INT_EN BIT(2) +#define DP83811_OVERTEMP_INT_EN BIT(3) +#define DP83811_OVERVOLTAGE_INT_EN BIT(6) +#define DP83811_UNDERVOLTAGE_INT_EN BIT(7) + +#define MII_DP83811_RXSOP1 0x04a5 +#define MII_DP83811_RXSOP2 0x04a6 +#define MII_DP83811_RXSOP3 0x04a7 + +/* WoL Registers */ +#define MII_DP83811_WOL_CFG 0x04a0 +#define MII_DP83811_WOL_STAT 0x04a1 +#define MII_DP83811_WOL_DA1 0x04a2 +#define MII_DP83811_WOL_DA2 0x04a3 +#define MII_DP83811_WOL_DA3 0x04a4 + +/* WoL bits */ +#define DP83811_WOL_MAGIC_EN BIT(0) +#define DP83811_WOL_SECURE_ON BIT(5) +#define DP83811_WOL_EN BIT(7) +#define DP83811_WOL_INDICATION_SEL BIT(8) +#define DP83811_WOL_CLR_INDICATION BIT(11) + +/* SGMII CTRL bits */ +#define DP83811_TDR_AUTO BIT(8) +#define DP83811_SGMII_EN BIT(12) +#define DP83811_SGMII_AUTO_NEG_EN BIT(13) +#define DP83811_SGMII_TX_ERR_DIS BIT(14) +#define DP83811_SGMII_SOFT_RESET BIT(15) + +static int dp83811_ack_interrupt(struct phy_device *phydev) +{ + int err; + + err = phy_read(phydev, MII_DP83811_INT_STAT1); + if (err < 0) + return err; + + err = phy_read(phydev, MII_DP83811_INT_STAT2); + if (err < 0) + return err; + + return 0; +} + +static int dp83811_set_wol(struct phy_device *phydev, + struct ethtool_wolinfo *wol) +{ + struct net_device *ndev = phydev->attached_dev; + const u8 *mac; + u16 value; + + if (wol->wolopts & (WAKE_MAGIC | WAKE_MAGICSECURE)) { + mac = (const u8 *)ndev->dev_addr; + + if (!is_valid_ether_addr(mac)) + return -EINVAL; + + /* MAC addresses start with byte 5, but stored in mac[0]. + * 811 PHYs store bytes 4|5, 2|3, 0|1 + */ + phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_DA1, + (mac[1] << 8) | mac[0]); + phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_DA2, + (mac[3] << 8) | mac[2]); + phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_DA3, + (mac[5] << 8) | mac[4]); + + value = phy_read_mmd(phydev, DP83811_DEVADDR, + MII_DP83811_WOL_CFG); + if (wol->wolopts & WAKE_MAGIC) + value |= DP83811_WOL_MAGIC_EN; + else + value &= ~DP83811_WOL_MAGIC_EN; + + if (wol->wolopts & WAKE_MAGICSECURE) { + phy_write_mmd(phydev, DP83811_DEVADDR, + MII_DP83811_RXSOP1, + (wol->sopass[1] << 8) | wol->sopass[0]); + phy_write_mmd(phydev, DP83811_DEVADDR, + MII_DP83811_RXSOP2, + (wol->sopass[3] << 8) | wol->sopass[2]); + phy_write_mmd(phydev, DP83811_DEVADDR, + MII_DP83811_RXSOP3, + (wol->sopass[5] << 8) | wol->sopass[4]); + value |= DP83811_WOL_SECURE_ON; + } else { + value &= ~DP83811_WOL_SECURE_ON; + } + + value |= (DP83811_WOL_EN | DP83811_WOL_INDICATION_SEL | + DP83811_WOL_CLR_INDICATION); + phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG, + value); + } else { + value = phy_read_mmd(phydev, DP83811_DEVADDR, + MII_DP83811_WOL_CFG); + value &= ~DP83811_WOL_EN; + phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG, + value); + } + + return 0; +} + +static void dp83811_get_wol(struct phy_device *phydev, + struct ethtool_wolinfo *wol) +{ + u16 sopass_val; + int value; + + wol->supported = (WAKE_MAGIC | WAKE_MAGICSECURE); + wol->wolopts = 0; + + value = phy_read_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG); + + if (value & DP83811_WOL_MAGIC_EN) + wol->wolopts |= WAKE_MAGIC; + + if (value & DP83811_WOL_SECURE_ON) { + sopass_val = phy_read_mmd(phydev, DP83811_DEVADDR, + MII_DP83811_RXSOP1); + wol->sopass[0] = (sopass_val & 0xff); + wol->sopass[1] = (sopass_val >> 8); + + sopass_val = phy_read_mmd(phydev, DP83811_DEVADDR, + MII_DP83811_RXSOP2); + wol->sopass[2] = (sopass_val & 0xff); + wol->sopass[3] = (sopass_val >> 8); + + sopass_val = phy_read_mmd(phydev, DP83811_DEVADDR, + MII_DP83811_RXSOP3); + wol->sopass[4] = (sopass_val & 0xff); + wol->sopass[5] = (sopass_val >> 8); + + wol->wolopts |= WAKE_MAGICSECURE; + } + + /* WoL is not enabled so set wolopts to 0 */ + if (!(value & DP83811_WOL_EN)) + wol->wolopts = 0; +} + +static int dp83811_config_intr(struct phy_device *phydev) +{ + int misr_status, err; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { + misr_status = phy_read(phydev, MII_DP83811_INT_STAT1); + if (misr_status < 0) + return misr_status; + + misr_status |= (DP83811_RX_ERR_HF_INT_EN | + DP83811_MS_TRAINING_INT_EN | + DP83811_ANEG_COMPLETE_INT_EN | + DP83811_ESD_EVENT_INT_EN | + DP83811_WOL_INT_EN | + DP83811_LINK_STAT_INT_EN | + DP83811_ENERGY_DET_INT_EN | + DP83811_LINK_QUAL_INT_EN); + + err = phy_write(phydev, MII_DP83811_INT_STAT1, misr_status); + if (err < 0) + return err; + + misr_status = phy_read(phydev, MII_DP83811_INT_STAT2); + if (misr_status < 0) + return misr_status; + + misr_status |= (DP83811_JABBER_DET_INT_EN | + DP83811_POLARITY_INT_EN | + DP83811_SLEEP_MODE_INT_EN | + DP83811_OVERTEMP_INT_EN | + DP83811_OVERVOLTAGE_INT_EN | + DP83811_UNDERVOLTAGE_INT_EN); + + err = phy_write(phydev, MII_DP83811_INT_STAT2, misr_status); + + } else { + err = phy_write(phydev, MII_DP83811_INT_STAT1, 0); + if (err < 0) + return err; + + err = phy_write(phydev, MII_DP83811_INT_STAT1, 0); + } + + return err; +} + +static int dp83811_config_aneg(struct phy_device *phydev) +{ + int value, err; + + if (phydev->interface == PHY_INTERFACE_MODE_SGMII) { + value = phy_read(phydev, MII_DP83811_SGMII_CTRL); + if (phydev->autoneg == AUTONEG_ENABLE) { + err = phy_write(phydev, MII_DP83811_SGMII_CTRL, + (DP83811_SGMII_AUTO_NEG_EN | value)); + if (err < 0) + return err; + } else { + err = phy_write(phydev, MII_DP83811_SGMII_CTRL, + (~DP83811_SGMII_AUTO_NEG_EN & value)); + if (err < 0) + return err; + } + } + + return genphy_config_aneg(phydev); +} + +static int dp83811_config_init(struct phy_device *phydev) +{ + int value, err; + + err = genphy_config_init(phydev); + if (err < 0) + return err; + + if (phydev->interface == PHY_INTERFACE_MODE_SGMII) { + value = phy_read(phydev, MII_DP83811_SGMII_CTRL); + if (!(value & DP83811_SGMII_EN)) { + err = phy_write(phydev, MII_DP83811_SGMII_CTRL, + (DP83811_SGMII_EN | value)); + if (err < 0) + return err; + } else { + err = phy_write(phydev, MII_DP83811_SGMII_CTRL, + (~DP83811_SGMII_EN & value)); + if (err < 0) + return err; + } + } + + value = DP83811_WOL_MAGIC_EN | DP83811_WOL_SECURE_ON | DP83811_WOL_EN; + + return phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG, + value); +} + +static int dp83811_phy_reset(struct phy_device *phydev) +{ + int err; + + err = phy_write(phydev, MII_DP83811_RESET_CTRL, DP83811_HW_RESET); + if (err < 0) + return err; + + return 0; +} + +static int dp83811_suspend(struct phy_device *phydev) +{ + int value; + + value = phy_read_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG); + + if (!(value & DP83811_WOL_EN)) + genphy_suspend(phydev); + + return 0; +} + +static int dp83811_resume(struct phy_device *phydev) +{ + int value; + + genphy_resume(phydev); + + value = phy_read_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG); + + phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG, value | + DP83811_WOL_CLR_INDICATION); + + return 0; +} + +static struct phy_driver dp83811_driver[] = { + { + .phy_id = DP83TC811_PHY_ID, + .phy_id_mask = 0xfffffff0, + .name = "TI DP83TC811", + .features = PHY_BASIC_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = dp83811_config_init, + .config_aneg = dp83811_config_aneg, + .soft_reset = dp83811_phy_reset, + .get_wol = dp83811_get_wol, + .set_wol = dp83811_set_wol, + .ack_interrupt = dp83811_ack_interrupt, + .config_intr = dp83811_config_intr, + .suspend = dp83811_suspend, + .resume = dp83811_resume, + }, +}; +module_phy_driver(dp83811_driver); + +static struct mdio_device_id __maybe_unused dp83811_tbl[] = { + { DP83TC811_PHY_ID, 0xfffffff0 }, + { }, +}; +MODULE_DEVICE_TABLE(mdio, dp83811_tbl); + +MODULE_DESCRIPTION("Texas Instruments DP83TC811 PHY driver"); +MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com"); +MODULE_LICENSE("GPL"); |