aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/phy
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/phy')
-rw-r--r--drivers/net/phy/broadcom.c18
-rw-r--r--drivers/net/phy/mdio-gpio.c10
-rw-r--r--drivers/net/phy/mscc.c14
-rw-r--r--drivers/net/phy/phy_device.c34
-rw-r--r--drivers/net/phy/realtek.c2
-rw-r--r--drivers/net/phy/sfp-bus.c2
6 files changed, 46 insertions, 34 deletions
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index e86ea105c802..704537010453 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -92,7 +92,7 @@ static int bcm54612e_config_init(struct phy_device *phydev)
return 0;
}
-static int bcm5481x_config(struct phy_device *phydev)
+static int bcm54xx_config_clock_delay(struct phy_device *phydev)
{
int rc, val;
@@ -429,7 +429,7 @@ static int bcm5481_config_aneg(struct phy_device *phydev)
ret = genphy_config_aneg(phydev);
/* Then we can set up the delay. */
- bcm5481x_config(phydev);
+ bcm54xx_config_clock_delay(phydev);
if (of_property_read_bool(np, "enet-phy-lane-swap")) {
/* Lane Swap - Undocumented register...magic! */
@@ -442,6 +442,19 @@ static int bcm5481_config_aneg(struct phy_device *phydev)
return ret;
}
+static int bcm54616s_config_aneg(struct phy_device *phydev)
+{
+ int ret;
+
+ /* Aneg firsly. */
+ ret = genphy_config_aneg(phydev);
+
+ /* Then we can set up the delay. */
+ bcm54xx_config_clock_delay(phydev);
+
+ return ret;
+}
+
static int brcm_phy_setbits(struct phy_device *phydev, int reg, int set)
{
int val;
@@ -636,6 +649,7 @@ static struct phy_driver broadcom_drivers[] = {
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_init = bcm54xx_config_init,
+ .config_aneg = bcm54616s_config_aneg,
.ack_interrupt = bcm_phy_ack_intr,
.config_intr = bcm_phy_config_intr,
}, {
diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c
index 33265747bf39..0fbcedcdf6e2 100644
--- a/drivers/net/phy/mdio-gpio.c
+++ b/drivers/net/phy/mdio-gpio.c
@@ -63,7 +63,7 @@ static void mdio_dir(struct mdiobb_ctrl *ctrl, int dir)
* assume the pin serves as pull-up. If direction is
* output, the default value is high.
*/
- gpiod_set_value(bitbang->mdo, 1);
+ gpiod_set_value_cansleep(bitbang->mdo, 1);
return;
}
@@ -78,7 +78,7 @@ static int mdio_get(struct mdiobb_ctrl *ctrl)
struct mdio_gpio_info *bitbang =
container_of(ctrl, struct mdio_gpio_info, ctrl);
- return gpiod_get_value(bitbang->mdio);
+ return gpiod_get_value_cansleep(bitbang->mdio);
}
static void mdio_set(struct mdiobb_ctrl *ctrl, int what)
@@ -87,9 +87,9 @@ static void mdio_set(struct mdiobb_ctrl *ctrl, int what)
container_of(ctrl, struct mdio_gpio_info, ctrl);
if (bitbang->mdo)
- gpiod_set_value(bitbang->mdo, what);
+ gpiod_set_value_cansleep(bitbang->mdo, what);
else
- gpiod_set_value(bitbang->mdio, what);
+ gpiod_set_value_cansleep(bitbang->mdio, what);
}
static void mdc_set(struct mdiobb_ctrl *ctrl, int what)
@@ -97,7 +97,7 @@ static void mdc_set(struct mdiobb_ctrl *ctrl, int what)
struct mdio_gpio_info *bitbang =
container_of(ctrl, struct mdio_gpio_info, ctrl);
- gpiod_set_value(bitbang->mdc, what);
+ gpiod_set_value_cansleep(bitbang->mdc, what);
}
static const struct mdiobb_ops mdio_gpio_ops = {
diff --git a/drivers/net/phy/mscc.c b/drivers/net/phy/mscc.c
index a2e59f4f6f01..7cae17517744 100644
--- a/drivers/net/phy/mscc.c
+++ b/drivers/net/phy/mscc.c
@@ -810,17 +810,13 @@ static int vsc85xx_default_config(struct phy_device *phydev)
phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
mutex_lock(&phydev->lock);
- rc = phy_select_page(phydev, MSCC_PHY_PAGE_EXTENDED_2);
- if (rc < 0)
- goto out_unlock;
- reg_val = phy_read(phydev, MSCC_PHY_RGMII_CNTL);
- reg_val &= ~(RGMII_RX_CLK_DELAY_MASK);
- reg_val |= (RGMII_RX_CLK_DELAY_1_1_NS << RGMII_RX_CLK_DELAY_POS);
- phy_write(phydev, MSCC_PHY_RGMII_CNTL, reg_val);
+ reg_val = RGMII_RX_CLK_DELAY_1_1_NS << RGMII_RX_CLK_DELAY_POS;
+
+ rc = phy_modify_paged(phydev, MSCC_PHY_PAGE_EXTENDED_2,
+ MSCC_PHY_RGMII_CNTL, RGMII_RX_CLK_DELAY_MASK,
+ reg_val);
-out_unlock:
- rc = phy_restore_page(phydev, rc, rc > 0 ? 0 : rc);
mutex_unlock(&phydev->lock);
return rc;
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index ab33d1777132..26c41ede54a4 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -308,11 +308,8 @@ static int mdio_bus_phy_restore(struct device *dev)
if (ret < 0)
return ret;
- /* The PHY needs to renegotiate. */
- phydev->link = 0;
- phydev->state = PHY_UP;
-
- phy_start_machine(phydev);
+ if (phydev->attached_dev && phydev->adjust_link)
+ phy_start_machine(phydev);
return 0;
}
@@ -1880,20 +1877,17 @@ EXPORT_SYMBOL(genphy_loopback);
static int __set_phy_supported(struct phy_device *phydev, u32 max_speed)
{
- phydev->supported &= ~(PHY_1000BT_FEATURES | PHY_100BT_FEATURES |
- PHY_10BT_FEATURES);
-
switch (max_speed) {
- default:
- return -ENOTSUPP;
- case SPEED_1000:
- phydev->supported |= PHY_1000BT_FEATURES;
+ case SPEED_10:
+ phydev->supported &= ~PHY_100BT_FEATURES;
/* fall through */
case SPEED_100:
- phydev->supported |= PHY_100BT_FEATURES;
- /* fall through */
- case SPEED_10:
- phydev->supported |= PHY_10BT_FEATURES;
+ phydev->supported &= ~PHY_1000BT_FEATURES;
+ break;
+ case SPEED_1000:
+ break;
+ default:
+ return -ENOTSUPP;
}
return 0;
@@ -2197,6 +2191,14 @@ int phy_driver_register(struct phy_driver *new_driver, struct module *owner)
new_driver->mdiodrv.driver.remove = phy_remove;
new_driver->mdiodrv.driver.owner = owner;
+ /* The following works around an issue where the PHY driver doesn't bind
+ * to the device, resulting in the genphy driver being used instead of
+ * the dedicated driver. The root cause of the issue isn't known yet
+ * and seems to be in the base driver core. Once this is fixed we may
+ * remove this workaround.
+ */
+ new_driver->mdiodrv.driver.probe_type = PROBE_FORCE_SYNCHRONOUS;
+
retval = driver_register(&new_driver->mdiodrv.driver);
if (retval) {
pr_err("%s: Error %d in registering driver\n",
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 7fc8508b5231..271e8adc39f1 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -220,7 +220,7 @@ static struct phy_driver realtek_drvs[] = {
.flags = PHY_HAS_INTERRUPT,
}, {
.phy_id = 0x001cc816,
- .name = "RTL8201F 10/100Mbps Ethernet",
+ .name = "RTL8201F Fast Ethernet",
.phy_id_mask = 0x001fffff,
.features = PHY_BASIC_FEATURES,
.flags = PHY_HAS_INTERRUPT,
diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c
index 83060fb349f4..ad9db652874d 100644
--- a/drivers/net/phy/sfp-bus.c
+++ b/drivers/net/phy/sfp-bus.c
@@ -162,7 +162,7 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
/* 1000Base-PX or 1000Base-BX10 */
if ((id->base.e_base_px || id->base.e_base_bx10) &&
br_min <= 1300 && br_max >= 1200)
- phylink_set(support, 1000baseX_Full);
+ phylink_set(modes, 1000baseX_Full);
/* For active or passive cables, select the link modes
* based on the bit rates and the cable compliance bytes.
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.