diff options
Diffstat (limited to 'drivers/net/phy')
| -rw-r--r-- | drivers/net/phy/Kconfig | 18 | ||||
| -rw-r--r-- | drivers/net/phy/Makefile | 2 | ||||
| -rw-r--r-- | drivers/net/phy/at803x.c | 176 | ||||
| -rw-r--r-- | drivers/net/phy/dp83640.c | 2 | ||||
| -rw-r--r-- | drivers/net/phy/lxt.c | 127 | ||||
| -rw-r--r-- | drivers/net/phy/mdio-bitbang.c | 1 | ||||
| -rw-r--r-- | drivers/net/phy/mdio-gpio.c | 132 | ||||
| -rw-r--r-- | drivers/net/phy/mdio-mux-mmioreg.c | 171 | ||||
| -rw-r--r-- | drivers/net/phy/mdio_bus.c | 1 | ||||
| -rw-r--r-- | drivers/net/phy/phy.c | 74 |
10 files changed, 544 insertions, 160 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 3090dc65a6f1..961f0b293913 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -15,6 +15,11 @@ if PHYLIB comment "MII PHY device drivers" +config AT803X_PHY + tristate "Drivers for Atheros AT803X PHYs" + ---help--- + Currently supports the AT8030 and AT8035 model + config AMD_PHY tristate "Drivers for the AMD PHYs" ---help--- @@ -159,6 +164,19 @@ config MDIO_BUS_MUX_GPIO several child MDIO busses to a parent bus. Child bus selection is under the control of GPIO lines. +config MDIO_BUS_MUX_MMIOREG + tristate "Support for MMIO device-controlled MDIO bus multiplexers" + depends on OF_MDIO + select MDIO_BUS_MUX + help + This module provides a driver for MDIO bus multiplexers that + are controlled via a simple memory-mapped device, like an FPGA. + The multiplexer connects one of several child MDIO busses to a + parent bus. Child bus selection is under the control of one of + the FPGA's registers. + + Currently, only 8-bit registers are supported. + endif # PHYLIB config MICREL_KS8995MA diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index 6d2dc6c94f2e..9645e389a58d 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -25,6 +25,8 @@ obj-$(CONFIG_STE10XP) += ste10Xp.o obj-$(CONFIG_MICREL_PHY) += micrel.o obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o +obj-$(CONFIG_AT803X_PHY) += at803x.o obj-$(CONFIG_AMD_PHY) += amd.o obj-$(CONFIG_MDIO_BUS_MUX) += mdio-mux.o obj-$(CONFIG_MDIO_BUS_MUX_GPIO) += mdio-mux-gpio.o +obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c new file mode 100644 index 000000000000..45cbc10de01c --- /dev/null +++ b/drivers/net/phy/at803x.c @@ -0,0 +1,176 @@ +/* + * drivers/net/phy/at803x.c + * + * Driver for Atheros 803x PHY + * + * Author: Matus Ujhelyi <ujhelyi.m@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/phy.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> + +#define AT803X_INTR_ENABLE 0x12 +#define AT803X_INTR_STATUS 0x13 +#define AT803X_WOL_ENABLE 0x01 +#define AT803X_DEVICE_ADDR 0x03 +#define AT803X_LOC_MAC_ADDR_0_15_OFFSET 0x804C +#define AT803X_LOC_MAC_ADDR_16_31_OFFSET 0x804B +#define AT803X_LOC_MAC_ADDR_32_47_OFFSET 0x804A +#define AT803X_MMD_ACCESS_CONTROL 0x0D +#define AT803X_MMD_ACCESS_CONTROL_DATA 0x0E +#define AT803X_FUNC_DATA 0x4003 + +MODULE_DESCRIPTION("Atheros 803x PHY driver"); +MODULE_AUTHOR("Matus Ujhelyi"); +MODULE_LICENSE("GPL"); + +static void at803x_set_wol_mac_addr(struct phy_device *phydev) +{ + struct net_device *ndev = phydev->attached_dev; + const u8 *mac; + unsigned int i, offsets[] = { + AT803X_LOC_MAC_ADDR_32_47_OFFSET, + AT803X_LOC_MAC_ADDR_16_31_OFFSET, + AT803X_LOC_MAC_ADDR_0_15_OFFSET, + }; + + if (!ndev) + return; + + mac = (const u8 *) ndev->dev_addr; + + if (!is_valid_ether_addr(mac)) + return; + + for (i = 0; i < 3; i++) { + phy_write(phydev, AT803X_MMD_ACCESS_CONTROL, + AT803X_DEVICE_ADDR); + phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA, + offsets[i]); + phy_write(phydev, AT803X_MMD_ACCESS_CONTROL, + AT803X_FUNC_DATA); + phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA, + mac[(i * 2) + 1] | (mac[(i * 2)] << 8)); + } +} + +static int at803x_config_init(struct phy_device *phydev) +{ + int val; + u32 features; + int status; + + features = SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_AUI | + SUPPORTED_FIBRE | SUPPORTED_BNC; + + val = phy_read(phydev, MII_BMSR); + if (val < 0) + return val; + + if (val & BMSR_ANEGCAPABLE) + features |= SUPPORTED_Autoneg; + if (val & BMSR_100FULL) + features |= SUPPORTED_100baseT_Full; + if (val & BMSR_100HALF) + features |= SUPPORTED_100baseT_Half; + if (val & BMSR_10FULL) + features |= SUPPORTED_10baseT_Full; + if (val & BMSR_10HALF) + features |= SUPPORTED_10baseT_Half; + + if (val & BMSR_ESTATEN) { + val = phy_read(phydev, MII_ESTATUS); + if (val < 0) + return val; + + if (val & ESTATUS_1000_TFULL) + features |= SUPPORTED_1000baseT_Full; + if (val & ESTATUS_1000_THALF) + features |= SUPPORTED_1000baseT_Half; + } + + phydev->supported = features; + phydev->advertising = features; + + /* enable WOL */ + at803x_set_wol_mac_addr(phydev); + status = phy_write(phydev, AT803X_INTR_ENABLE, AT803X_WOL_ENABLE); + status = phy_read(phydev, AT803X_INTR_STATUS); + + return 0; +} + +/* ATHEROS 8035 */ +static struct phy_driver at8035_driver = { + .phy_id = 0x004dd072, + .name = "Atheros 8035 ethernet", + .phy_id_mask = 0xffffffef, + .config_init = at803x_config_init, + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_aneg = &genphy_config_aneg, + .read_status = &genphy_read_status, + .driver = { + .owner = THIS_MODULE, + }, +}; + +/* ATHEROS 8030 */ +static struct phy_driver at8030_driver = { + .phy_id = 0x004dd076, + .name = "Atheros 8030 ethernet", + .phy_id_mask = 0xffffffef, + .config_init = at803x_config_init, + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_aneg = &genphy_config_aneg, + .read_status = &genphy_read_status, + .driver = { + .owner = THIS_MODULE, + }, +}; + +static int __init atheros_init(void) +{ + int ret; + + ret = phy_driver_register(&at8035_driver); + if (ret) + goto err1; + + ret = phy_driver_register(&at8030_driver); + if (ret) + goto err2; + + return 0; + +err2: + phy_driver_unregister(&at8035_driver); +err1: + return ret; +} + +static void __exit atheros_exit(void) +{ + phy_driver_unregister(&at8035_driver); + phy_driver_unregister(&at8030_driver); +} + +module_init(atheros_init); +module_exit(atheros_exit); + +static struct mdio_device_id __maybe_unused atheros_tbl[] = { + { 0x004dd076, 0xffffffef }, + { 0x004dd072, 0xffffffef }, + { } +}; + +MODULE_DEVICE_TABLE(mdio, atheros_tbl); diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c index b0da0226661f..24e05c43bff8 100644 --- a/drivers/net/phy/dp83640.c +++ b/drivers/net/phy/dp83640.c @@ -980,7 +980,7 @@ static int dp83640_probe(struct phy_device *phydev) if (choose_this_phy(clock, phydev)) { clock->chosen = dp83640; - clock->ptp_clock = ptp_clock_register(&clock->caps); + clock->ptp_clock = ptp_clock_register(&clock->caps, &phydev->dev); if (IS_ERR(clock->ptp_clock)) { err = PTR_ERR(clock->ptp_clock); goto no_register; diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c index 6d1e3fcc43e2..ec40ba882f61 100644 --- a/drivers/net/phy/lxt.c +++ b/drivers/net/phy/lxt.c @@ -122,6 +122,123 @@ static int lxt971_config_intr(struct phy_device *phydev) return err; } +/* + * A2 version of LXT973 chip has an ERRATA: it randomly return the contents + * of the previous even register when you read a odd register regularly + */ + +static int lxt973a2_update_link(struct phy_device *phydev) +{ + int status; + int control; + int retry = 8; /* we try 8 times */ + + /* Do a fake read */ + status = phy_read(phydev, MII_BMSR); + + if (status < 0) + return status; + + control = phy_read(phydev, MII_BMCR); + if (control < 0) + return control; + + do { + /* Read link and autonegotiation status */ + status = phy_read(phydev, MII_BMSR); + } while (status >= 0 && retry-- && status == control); + + if (status < 0) + return status; + + if ((status & BMSR_LSTATUS) == 0) + phydev->link = 0; + else + phydev->link = 1; + + return 0; +} + +int lxt973a2_read_status(struct phy_device *phydev) +{ + int adv; + int err; + int lpa; + int lpagb = 0; + + /* Update the link, but return if there was an error */ + err = lxt973a2_update_link(phydev); + if (err) + return err; + + if (AUTONEG_ENABLE == phydev->autoneg) { + int retry = 1; + + adv = phy_read(phydev, MII_ADVERTISE); + + if (adv < 0) + return adv; + + do { + lpa = phy_read(phydev, MII_LPA); + + if (lpa < 0) + return lpa; + + /* If both registers are equal, it is suspect but not + * impossible, hence a new try + */ + } while (lpa == adv && retry--); + + lpa &= adv; + + phydev->speed = SPEED_10; + phydev->duplex = DUPLEX_HALF; + phydev->pause = phydev->asym_pause = 0; + + if (lpagb & (LPA_1000FULL | LPA_1000HALF)) { + phydev->speed = SPEED_1000; + + if (lpagb & LPA_1000FULL) + phydev->duplex = DUPLEX_FULL; + } else if (lpa & (LPA_100FULL | LPA_100HALF)) { + phydev->speed = SPEED_100; + + if (lpa & LPA_100FULL) + phydev->duplex = DUPLEX_FULL; + } else { + if (lpa & LPA_10FULL) + phydev->duplex = DUPLEX_FULL; + } + + if (phydev->duplex == DUPLEX_FULL) { + phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0; + phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0; + } + } else { + int bmcr = phy_read(phydev, MII_BMCR); + + if (bmcr < 0) + return bmcr; + + if (bmcr & BMCR_FULLDPLX) + phydev->duplex = DUPLEX_FULL; + else + phydev->duplex = DUPLEX_HALF; + + if (bmcr & BMCR_SPEED1000) + phydev->speed = SPEED_1000; + else if (bmcr & BMCR_SPEED100) + phydev->speed = SPEED_100; + else + phydev->speed = SPEED_10; + + phydev->pause = phydev->asym_pause = 0; + } + + return 0; +} + static int lxt973_probe(struct phy_device *phydev) { int val = phy_read(phydev, MII_LXT973_PCR); @@ -175,6 +292,16 @@ static struct phy_driver lxt97x_driver[] = { .driver = { .owner = THIS_MODULE,}, }, { .phy_id = 0x00137a10, + .name = "LXT973-A2", + .phy_id_mask = 0xffffffff, + .features = PHY_BASIC_FEATURES, + .flags = 0, + .probe = lxt973_probe, + .config_aneg = lxt973_config_aneg, + .read_status = lxt973a2_read_status, + .driver = { .owner = THIS_MODULE,}, +}, { + .phy_id = 0x00137a10, .name = "LXT973", .phy_id_mask = 0xfffffff0, .features = PHY_BASIC_FEATURES, diff --git a/drivers/net/phy/mdio-bitbang.c b/drivers/net/phy/mdio-bitbang.c index daec9b05d168..6428fcbbdd4b 100644 --- a/drivers/net/phy/mdio-bitbang.c +++ b/drivers/net/phy/mdio-bitbang.c @@ -234,6 +234,7 @@ void free_mdio_bitbang(struct mii_bus *bus) struct mdiobb_ctrl *ctrl = bus->priv; module_put(ctrl->ops->owner); + mdiobus_unregister(bus); mdiobus_free(bus); } EXPORT_SYMBOL(free_mdio_bitbang); diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c index 7189adf54bd1..899274f2f9b1 100644 --- a/drivers/net/phy/mdio-gpio.c +++ b/drivers/net/phy/mdio-gpio.c @@ -28,17 +28,38 @@ #include <linux/gpio.h> #include <linux/mdio-gpio.h> -#ifdef CONFIG_OF_GPIO #include <linux/of_gpio.h> #include <linux/of_mdio.h> -#include <linux/of_platform.h> -#endif struct mdio_gpio_info { struct mdiobb_ctrl ctrl; int mdc, mdio; }; +static void *mdio_gpio_of_get_data(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct mdio_gpio_platform_data *pdata; + int ret; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return NULL; + + ret = of_get_gpio(np, 0); + if (ret < 0) + return NULL; + + pdata->mdc = ret; + + ret = of_get_gpio(np, 1); + if (ret < 0) + return NULL; + pdata->mdio = ret; + + return pdata; +} + static void mdio_dir(struct mdiobb_ctrl *ctrl, int dir) { struct mdio_gpio_info *bitbang = @@ -162,10 +183,15 @@ static void __devexit mdio_gpio_bus_destroy(struct device *dev) static int __devinit mdio_gpio_probe(struct platform_device *pdev) { - struct mdio_gpio_platform_data *pdata = pdev->dev.platform_data; + struct mdio_gpio_platform_data *pdata; struct mii_bus *new_bus; int ret; + if (pdev->dev.of_node) + pdata = mdio_gpio_of_get_data(pdev); + else + pdata = pdev->dev.platform_data; + if (!pdata) return -ENODEV; @@ -173,7 +199,11 @@ static int __devinit mdio_gpio_probe(struct platform_device *pdev) if (!new_bus) return -ENODEV; - ret = mdiobus_register(new_bus); + if (pdev->dev.of_node) + ret = of_mdiobus_register(new_bus, pdev->dev.of_node); + else + ret = mdiobus_register(new_bus); + if (ret) mdio_gpio_bus_deinit(&pdev->dev); @@ -187,112 +217,30 @@ static int __devexit mdio_gpio_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_OF_GPIO - -static int __devinit mdio_ofgpio_probe(struct platform_device *ofdev) -{ - struct mdio_gpio_platform_data *pdata; - struct mii_bus *new_bus; - int ret; - - pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); - if (!pdata) - return -ENOMEM; - - ret = of_get_gpio(ofdev->dev.of_node, 0); - if (ret < 0) - goto out_free; - pdata->mdc = ret; - - ret = of_get_gpio(ofdev->dev.of_node, 1); - if (ret < 0) - goto out_free; - pdata->mdio = ret; - - new_bus = mdio_gpio_bus_init(&ofdev->dev, pdata, pdata->mdc); - if (!new_bus) - goto out_free; - - ret = of_mdiobus_register(new_bus, ofdev->dev.of_node); - if (ret) - mdio_gpio_bus_deinit(&ofdev->dev); - - return ret; - -out_free: - kfree(pdata); - return -ENODEV; -} - -static int __devexit mdio_ofgpio_remove(struct platform_device *ofdev) -{ - mdio_gpio_bus_destroy(&ofdev->dev); - kfree(ofdev->dev.platform_data); - - return 0; -} - -static struct of_device_id mdio_ofgpio_match[] = { - { - .compatible = "virtual,mdio-gpio", - }, - {}, -}; -MODULE_DEVICE_TABLE(of, mdio_ofgpio_match); - -static struct platform_driver mdio_ofgpio_driver = { - .driver = { - .name = "mdio-ofgpio", - .owner = THIS_MODULE, - .of_match_table = mdio_ofgpio_match, - }, - .probe = mdio_ofgpio_probe, - .remove = __devexit_p(mdio_ofgpio_remove), +static struct of_device_id mdio_gpio_of_match[] = { + { .compatible = "virtual,mdio-gpio", }, + { /* sentinel */ } }; -static inline int __init mdio_ofgpio_init(void) -{ - return platform_driver_register(&mdio_ofgpio_driver); -} - -static inline void mdio_ofgpio_exit(void) -{ - platform_driver_unregister(&mdio_ofgpio_driver); -} -#else -static inline int __init mdio_ofgpio_init(void) { return 0; } -static inline void mdio_ofgpio_exit(void) { } -#endif /* CONFIG_OF_GPIO */ - static struct platform_driver mdio_gpio_driver = { .probe = mdio_gpio_probe, .remove = __devexit_p(mdio_gpio_remove), .driver = { .name = "mdio-gpio", .owner = THIS_MODULE, + .of_match_table = mdio_gpio_of_match, }, }; static int __init mdio_gpio_init(void) { - int ret; - - ret = mdio_ofgpio_init(); - if (ret) - return ret; - - ret = platform_driver_register(&mdio_gpio_driver); - if (ret) - mdio_ofgpio_exit(); - - return ret; + return platform_driver_register(&mdio_gpio_driver); } module_init(mdio_gpio_init); static void __exit mdio_gpio_exit(void) { platform_driver_unregister(&mdio_gpio_driver); - mdio_ofgpio_exit(); } module_exit(mdio_gpio_exit); diff --git a/drivers/net/phy/mdio-mux-mmioreg.c b/drivers/net/phy/mdio-mux-mmioreg.c new file mode 100644 index 000000000000..9061ba622ac4 --- /dev/null +++ b/drivers/net/phy/mdio-mux-mmioreg.c @@ -0,0 +1,171 @@ +/* + * Simple memory-mapped device MDIO MUX driver + * + * Author: Timur Tabi <timur@freescale.com> + * + * Copyright 2012 Freescale Semiconductor, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/platform_device.h> +#include <linux/device.h> +#include <linux/of_address.h> +#include <linux/of_mdio.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/phy.h> +#include <linux/mdio-mux.h> + +struct mdio_mux_mmioreg_state { + void *mux_handle; + phys_addr_t phys; + uint8_t mask; +}; + +/* + * MDIO multiplexing switch function + * + * This function is called by the mdio-mux layer when it thinks the mdio bus + * multiplexer needs to switch. + * + * 'current_child' is the current value of the mux register (masked via + * s->mask). + * + * 'desired_child' is the value of the 'reg' property of the target child MDIO + * node. + * + * The first time this function is called, current_child == -1. + * + * If current_child == desired_child, then the mux is already set to the + * correct bus. + */ +static int mdio_mux_mmioreg_switch_fn(int current_child, int desired_child, + void *data) +{ + struct mdio_mux_mmioreg_state *s = data; + + if (current_child ^ desired_child) { + void *p = ioremap(s->phys, 1); + uint8_t x, y; + + if (!p) + return -ENOMEM; + + x = ioread8(p); + y = (x & ~s->mask) | desired_child; + if (x != y) { + iowrite8((x & ~s->mask) | desired_child, p); + pr_debug("%s: %02x -> %02x\n", __func__, x, y); + } + + iounmap(p); + } + + return 0; +} + +static int __devinit mdio_mux_mmioreg_probe(struct platform_device *pdev) +{ + struct device_node *np2, *np = pdev->dev.of_node; + struct mdio_mux_mmioreg_state *s; + struct resource res; + const __be32 *iprop; + int len, ret; + + dev_dbg(&pdev->dev, "probing node %s\n", np->full_name); + + s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL); + if (!s) + return -ENOMEM; + + ret = of_address_to_resource(np, 0, &res); + if (ret) { + dev_err(&pdev->dev, "could not obtain memory map for node %s\n", + np->full_name); + return ret; + } + s->phys = res.start; + + if (resource_size(&res) != sizeof(uint8_t)) { + dev_err(&pdev->dev, "only 8-bit registers are supported\n"); + return -EINVAL; + } + + iprop = of_get_property(np, "mux-mask", &len); + if (!iprop || len != sizeof(uint32_t)) { + dev_err(&pdev->dev, "missing or invalid mux-mask property\n"); + return -ENODEV; + } + if (be32_to_cpup(iprop) > 255) { + dev_err(&pdev->dev, "only 8-bit registers are supported\n"); + return -EINVAL; + } + s->mask = be32_to_cpup(iprop); + + /* + * Verify that the 'reg' property of each child MDIO bus does not + * set any bits outside of the 'mask'. + */ + for_each_available_child_of_node(np, np2) { + iprop = of_get_property(np2, "reg", &len); + if (!iprop || len != sizeof(uint32_t)) { + dev_err(&pdev->dev, "mdio-mux child node %s is " + "missing a 'reg' property\n", np2->full_name); + return -ENODEV; + } + if (be32_to_cpup(iprop) & ~s->mask) { + dev_err(&pdev->dev, "mdio-mux child node %s has " + "a 'reg' value with unmasked bits\n", + np2->full_name); + return -ENODEV; + } + } + + ret = mdio_mux_init(&pdev->dev, mdio_mux_mmioreg_switch_fn, + &s->mux_handle, s); + if (ret) { + dev_err(&pdev->dev, "failed to register mdio-mux bus %s\n", + np->full_name); + return ret; + } + + pdev->dev.platform_data = s; + + return 0; +} + +static int __devexit mdio_mux_mmioreg_remove(struct platform_device *pdev) +{ + struct mdio_mux_mmioreg_state *s = dev_get_platdata(&pdev->dev); + + mdio_mux_uninit(s->mux_handle); + + return 0; +} + +static struct of_device_id mdio_mux_mmioreg_match[] = { + { + .compatible = "mdio-mux-mmioreg", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, mdio_mux_mmioreg_match); + +static struct platform_driver mdio_mux_mmioreg_driver = { + .driver = { + .name = "mdio-mux-mmioreg", + .owner = THIS_MODULE, + .of_match_table = mdio_mux_mmioreg_match, + }, + .probe = mdio_mux_mmioreg_probe, + .remove = __devexit_p(mdio_mux_mmioreg_remove), +}; + +module_platform_driver(mdio_mux_mmioreg_driver); + +MODULE_AUTHOR("Timur Tabi <timur@freescale.com>"); +MODULE_DESCRIPTION("Memory-mapped device MDIO MUX driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 170eb411ab5d..c1ef3000ea60 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -26,6 +26,7 @@ #include <linux/delay.h> #include <linux/device.h> #include <linux/of_device.h> +#include <linux/of_mdio.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> #include <linux/skbuff.h> diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 7ca2ff97c368..ef9ea9248223 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -1035,66 +1035,6 @@ static void phy_write_mmd_indirect(struct mii_bus *bus, int prtad, int devad, bus->write(bus, addr, MII_MMD_DATA, data); } -static u32 phy_eee_to_adv(u16 eee_adv) -{ - u32 adv = 0; - - if (eee_adv & MDIO_EEE_100TX) - adv |= ADVERTISED_100baseT_Full; - if (eee_adv & MDIO_EEE_1000T) - adv |= ADVERTISED_1000baseT_Full; - if (eee_adv & MDIO_EEE_10GT) - adv |= ADVERTISED_10000baseT_Full; - if (eee_adv & MDIO_EEE_1000KX) - adv |= ADVERTISED_1000baseKX_Full; - if (eee_adv & MDIO_EEE_10GKX4) - adv |= ADVERTISED_10000baseKX4_Full; - if (eee_adv & MDIO_EEE_10GKR) - adv |= ADVERTISED_10000baseKR_Full; - - return adv; -} - -static u32 phy_eee_to_supported(u16 eee_caported) -{ - u32 supported = 0; - - if (eee_caported & MDIO_EEE_100TX) - supported |= SUPPORTED_100baseT_Full; - if (eee_caported & MDIO_EEE_1000T) - supported |= SUPPORTED_1000baseT_Full; - if (eee_caported & MDIO_EEE_10GT) - supported |= SUPPORTED_10000baseT_Full; - if (eee_caported & MDIO_EEE_1000KX) - supported |= SUPPORTED_1000baseKX_Full; - if (eee_caported & MDIO_EEE_10GKX4) - supported |= SUPPORTED_10000baseKX4_Full; - if (eee_caported & MDIO_EEE_10GKR) - supported |= SUPPORTED_10000baseKR_Full; - - return supported; -} - -static u16 phy_adv_to_eee(u32 adv) -{ - u16 reg = 0; - - if (adv & ADVERTISED_100baseT_Full) - reg |= MDIO_EEE_100TX; - if (adv & ADVERTISED_1000baseT_Full) - reg |= MDIO_EEE_1000T; - if (adv & ADVERTISED_10000baseT_Full) - reg |= MDIO_EEE_10GT; - if (adv & ADVERTISED_1000baseKX_Full) - reg |= MDIO_EEE_1000KX; - if (adv & ADVERTISED_10000baseKX4_Full) - reg |= MDIO_EEE_10GKX4; - if (adv & ADVERTISED_10000baseKR_Full) - reg |= MDIO_EEE_10GKR; - - return reg; -} - /** * phy_init_eee - init and check the EEE feature * @phydev: target phy_device struct @@ -1132,7 +1072,7 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable) if (eee_cap < 0) return eee_cap; - cap = phy_eee_to_supported(eee_cap); + cap = mmd_eee_cap_to_ethtool_sup_t(eee_cap); if (!cap) goto eee_exit; @@ -1149,8 +1089,8 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable) if (eee_adv < 0) return eee_adv; - adv = phy_eee_to_adv(eee_adv); - lp = phy_eee_to_adv(eee_lp); + adv = mmd_eee_adv_to_ethtool_adv_t(eee_adv); + lp = mmd_eee_adv_to_ethtool_adv_t(eee_lp); idx = phy_find_setting(phydev->speed, phydev->duplex); if ((lp & adv & settings[idx].setting)) goto eee_exit; @@ -1210,21 +1150,21 @@ int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data) MDIO_MMD_PCS, phydev->addr); if (val < 0) return val; - data->supported = phy_eee_to_supported(val); + data->supported = mmd_eee_cap_to_ethtool_sup_t(val); /* Get advertisement EEE */ val = phy_read_mmd_indirect(phydev->bus, MDIO_AN_EEE_ADV, MDIO_MMD_AN, phydev->addr); if (val < 0) return val; - data->advertised = phy_eee_to_adv(val); + data->advertised = mmd_eee_adv_to_ethtool_adv_t(val); /* Get LP advertisement EEE */ val = phy_read_mmd_indirect(phydev->bus, MDIO_AN_EEE_LPABLE, MDIO_MMD_AN, phydev->addr); if (val < 0) return val; - data->lp_advertised = phy_eee_to_adv(val); + data->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(val); return 0; } @@ -1241,7 +1181,7 @@ int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data) { int val; - val = phy_adv_to_eee(data->advertised); + val = ethtool_adv_to_mmd_eee_adv_t(data->advertised); phy_write_mmd_indirect(phydev->bus, MDIO_AN_EEE_ADV, MDIO_MMD_AN, phydev->addr, val); |