aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/phy
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/phy')
-rw-r--r--drivers/net/phy/Kconfig13
-rw-r--r--drivers/net/phy/Makefile2
-rw-r--r--drivers/net/phy/adin1100.c292
-rw-r--r--drivers/net/phy/bcm87xx.c36
-rw-r--r--drivers/net/phy/dp83td510.c209
-rw-r--r--drivers/net/phy/marvell.c16
-rw-r--r--drivers/net/phy/micrel.c253
-rw-r--r--drivers/net/phy/microchip.c10
-rw-r--r--drivers/net/phy/microchip_t1.c50
-rw-r--r--drivers/net/phy/phy-c45.c297
-rw-r--r--drivers/net/phy/phy-core.c3
-rw-r--r--drivers/net/phy/phy.c18
-rw-r--r--drivers/net/phy/phy_device.c10
-rw-r--r--drivers/net/phy/phylink.c64
-rw-r--r--drivers/net/phy/smsc.c31
15 files changed, 1218 insertions, 86 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index ea7571a2b39b..9fee639ee5c8 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -83,6 +83,13 @@ config ADIN_PHY
- ADIN1300 - Robust,Industrial, Low Latency 10/100/1000 Gigabit
Ethernet PHY
+config ADIN1100_PHY
+ tristate "Analog Devices Industrial Ethernet T1L PHYs"
+ help
+ Adds support for the Analog Devices Industrial T1L Ethernet PHYs.
+ Currently supports the:
+ - ADIN1100 - Robust,Industrial, Low Power 10BASE-T1L Ethernet PHY
+
config AQUANTIA_PHY
tristate "Aquantia PHYs"
help
@@ -335,6 +342,12 @@ config DP83869_PHY
Currently supports the DP83869 PHY. This PHY supports copper and
fiber connections.
+config DP83TD510_PHY
+ tristate "Texas Instruments DP83TD510 Ethernet 10Base-T1L PHY"
+ help
+ Support for the DP83TD510 Ethernet 10Base-T1L PHY. This PHY supports
+ a 10M single pair Ethernet connection for up to 1000 meter cable.
+
config VITESSE_PHY
tristate "Vitesse PHYs"
help
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index b2728d00fc9a..b12b1d86fc99 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -31,6 +31,7 @@ sfp-obj-$(CONFIG_SFP) += sfp-bus.o
obj-y += $(sfp-obj-y) $(sfp-obj-m)
obj-$(CONFIG_ADIN_PHY) += adin.o
+obj-$(CONFIG_ADIN1100_PHY) += adin1100.o
obj-$(CONFIG_AMD_PHY) += amd.o
aquantia-objs += aquantia_main.o
ifdef CONFIG_HWMON
@@ -56,6 +57,7 @@ obj-$(CONFIG_DP83848_PHY) += dp83848.o
obj-$(CONFIG_DP83867_PHY) += dp83867.o
obj-$(CONFIG_DP83869_PHY) += dp83869.o
obj-$(CONFIG_DP83TC811_PHY) += dp83tc811.o
+obj-$(CONFIG_DP83TD510_PHY) += dp83td510.o
obj-$(CONFIG_FIXED_PHY) += fixed_phy.o
obj-$(CONFIG_ICPLUS_PHY) += icplus.o
obj-$(CONFIG_INTEL_XWAY_PHY) += intel-xway.o
diff --git a/drivers/net/phy/adin1100.c b/drivers/net/phy/adin1100.c
new file mode 100644
index 000000000000..b6d139501199
--- /dev/null
+++ b/drivers/net/phy/adin1100.c
@@ -0,0 +1,292 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Driver for Analog Devices Industrial Ethernet T1L PHYs
+ *
+ * Copyright 2020 Analog Devices Inc.
+ */
+#include <linux/kernel.h>
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+#include <linux/property.h>
+
+#define PHY_ID_ADIN1100 0x0283bc81
+
+#define ADIN_FORCED_MODE 0x8000
+#define ADIN_FORCED_MODE_EN BIT(0)
+
+#define ADIN_CRSM_SFT_RST 0x8810
+#define ADIN_CRSM_SFT_RST_EN BIT(0)
+
+#define ADIN_CRSM_SFT_PD_CNTRL 0x8812
+#define ADIN_CRSM_SFT_PD_CNTRL_EN BIT(0)
+
+#define ADIN_AN_PHY_INST_STATUS 0x8030
+#define ADIN_IS_CFG_SLV BIT(2)
+#define ADIN_IS_CFG_MST BIT(3)
+
+#define ADIN_CRSM_STAT 0x8818
+#define ADIN_CRSM_SFT_PD_RDY BIT(1)
+#define ADIN_CRSM_SYS_RDY BIT(0)
+
+#define ADIN_MSE_VAL 0x830B
+
+#define ADIN_SQI_MAX 7
+
+struct adin_mse_sqi_range {
+ u16 start;
+ u16 end;
+};
+
+static const struct adin_mse_sqi_range adin_mse_sqi_map[] = {
+ { 0x0A74, 0xFFFF },
+ { 0x084E, 0x0A74 },
+ { 0x0698, 0x084E },
+ { 0x053D, 0x0698 },
+ { 0x0429, 0x053D },
+ { 0x034E, 0x0429 },
+ { 0x02A0, 0x034E },
+ { 0x0000, 0x02A0 },
+};
+
+/**
+ * struct adin_priv - ADIN PHY driver private data
+ * @tx_level_2v4_able: set if the PHY supports 2.4V TX levels (10BASE-T1L)
+ * @tx_level_2v4: set if the PHY requests 2.4V TX levels (10BASE-T1L)
+ * @tx_level_prop_present: set if the TX level is specified in DT
+ */
+struct adin_priv {
+ unsigned int tx_level_2v4_able:1;
+ unsigned int tx_level_2v4:1;
+ unsigned int tx_level_prop_present:1;
+};
+
+static int adin_read_status(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = genphy_c45_read_status(phydev);
+ if (ret)
+ return ret;
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_AN, ADIN_AN_PHY_INST_STATUS);
+ if (ret < 0)
+ return ret;
+
+ if (ret & ADIN_IS_CFG_SLV)
+ phydev->master_slave_state = MASTER_SLAVE_STATE_SLAVE;
+
+ if (ret & ADIN_IS_CFG_MST)
+ phydev->master_slave_state = MASTER_SLAVE_STATE_MASTER;
+
+ return 0;
+}
+
+static int adin_config_aneg(struct phy_device *phydev)
+{
+ struct adin_priv *priv = phydev->priv;
+ int ret;
+
+ if (phydev->autoneg == AUTONEG_DISABLE) {
+ ret = genphy_c45_pma_setup_forced(phydev);
+ if (ret < 0)
+ return ret;
+
+ if (priv->tx_level_prop_present && priv->tx_level_2v4)
+ ret = phy_set_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_B10L_PMA_CTRL,
+ MDIO_PMA_10T1L_CTRL_2V4_EN);
+ else
+ ret = phy_clear_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_B10L_PMA_CTRL,
+ MDIO_PMA_10T1L_CTRL_2V4_EN);
+ if (ret < 0)
+ return ret;
+
+ /* Force PHY to use above configurations */
+ return phy_set_bits_mmd(phydev, MDIO_MMD_AN, ADIN_FORCED_MODE, ADIN_FORCED_MODE_EN);
+ }
+
+ ret = phy_clear_bits_mmd(phydev, MDIO_MMD_AN, ADIN_FORCED_MODE, ADIN_FORCED_MODE_EN);
+ if (ret < 0)
+ return ret;
+
+ /* Request increased transmit level from LP. */
+ if (priv->tx_level_prop_present && priv->tx_level_2v4) {
+ ret = phy_set_bits_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_ADV_H,
+ MDIO_AN_T1_ADV_H_10L_TX_HI |
+ MDIO_AN_T1_ADV_H_10L_TX_HI_REQ);
+ if (ret < 0)
+ return ret;
+ }
+
+ /* Disable 2.4 Vpp transmit level. */
+ if ((priv->tx_level_prop_present && !priv->tx_level_2v4) || !priv->tx_level_2v4_able) {
+ ret = phy_clear_bits_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_ADV_H,
+ MDIO_AN_T1_ADV_H_10L_TX_HI |
+ MDIO_AN_T1_ADV_H_10L_TX_HI_REQ);
+ if (ret < 0)
+ return ret;
+ }
+
+ return genphy_c45_config_aneg(phydev);
+}
+
+static int adin_set_powerdown_mode(struct phy_device *phydev, bool en)
+{
+ int ret;
+ int val;
+
+ val = en ? ADIN_CRSM_SFT_PD_CNTRL_EN : 0;
+ ret = phy_write_mmd(phydev, MDIO_MMD_VEND1,
+ ADIN_CRSM_SFT_PD_CNTRL, val);
+ if (ret < 0)
+ return ret;
+
+ return phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1, ADIN_CRSM_STAT, ret,
+ (ret & ADIN_CRSM_SFT_PD_RDY) == val,
+ 1000, 30000, true);
+}
+
+static int adin_suspend(struct phy_device *phydev)
+{
+ return adin_set_powerdown_mode(phydev, true);
+}
+
+static int adin_resume(struct phy_device *phydev)
+{
+ return adin_set_powerdown_mode(phydev, false);
+}
+
+static int adin_set_loopback(struct phy_device *phydev, bool enable)
+{
+ if (enable)
+ return phy_set_bits_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_10T1L_CTRL,
+ BMCR_LOOPBACK);
+
+ /* PCS loopback (according to 10BASE-T1L spec) */
+ return phy_clear_bits_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_10T1L_CTRL,
+ BMCR_LOOPBACK);
+}
+
+static int adin_soft_reset(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, ADIN_CRSM_SFT_RST, ADIN_CRSM_SFT_RST_EN);
+ if (ret < 0)
+ return ret;
+
+ return phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1, ADIN_CRSM_STAT, ret,
+ (ret & ADIN_CRSM_SYS_RDY),
+ 10000, 30000, true);
+}
+
+static int adin_get_features(struct phy_device *phydev)
+{
+ struct adin_priv *priv = phydev->priv;
+ struct device *dev = &phydev->mdio.dev;
+ int ret;
+ u8 val;
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10T1L_STAT);
+ if (ret < 0)
+ return ret;
+
+ /* This depends on the voltage level from the power source */
+ priv->tx_level_2v4_able = !!(ret & MDIO_PMA_10T1L_STAT_2V4_ABLE);
+
+ phydev_dbg(phydev, "PHY supports 2.4V TX level: %s\n",
+ priv->tx_level_2v4_able ? "yes" : "no");
+
+ priv->tx_level_prop_present = device_property_present(dev, "phy-10base-t1l-2.4vpp");
+ if (priv->tx_level_prop_present) {
+ ret = device_property_read_u8(dev, "phy-10base-t1l-2.4vpp", &val);
+ if (ret < 0)
+ return ret;
+
+ priv->tx_level_2v4 = val;
+ if (!priv->tx_level_2v4 && priv->tx_level_2v4_able)
+ phydev_info(phydev,
+ "PHY supports 2.4V TX level, but disabled via config\n");
+ }
+
+ linkmode_set_bit_array(phy_basic_ports_array, ARRAY_SIZE(phy_basic_ports_array),
+ phydev->supported);
+
+ return genphy_c45_pma_read_abilities(phydev);
+}
+
+static int adin_get_sqi(struct phy_device *phydev)
+{
+ u16 mse_val;
+ int sqi;
+ int ret;
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_STAT1);
+ if (ret < 0)
+ return ret;
+ else if (!(ret & MDIO_STAT1_LSTATUS))
+ return 0;
+
+ ret = phy_read_mmd(phydev, MDIO_STAT1, ADIN_MSE_VAL);
+ if (ret < 0)
+ return ret;
+
+ mse_val = 0xFFFF & ret;
+ for (sqi = 0; sqi < ARRAY_SIZE(adin_mse_sqi_map); sqi++) {
+ if (mse_val >= adin_mse_sqi_map[sqi].start && mse_val <= adin_mse_sqi_map[sqi].end)
+ return sqi;
+ }
+
+ return -EINVAL;
+}
+
+static int adin_get_sqi_max(struct phy_device *phydev)
+{
+ return ADIN_SQI_MAX;
+}
+
+static int adin_probe(struct phy_device *phydev)
+{
+ struct device *dev = &phydev->mdio.dev;
+ struct adin_priv *priv;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ phydev->priv = priv;
+
+ return 0;
+}
+
+static struct phy_driver adin_driver[] = {
+ {
+ PHY_ID_MATCH_MODEL(PHY_ID_ADIN1100),
+ .name = "ADIN1100",
+ .get_features = adin_get_features,
+ .soft_reset = adin_soft_reset,
+ .probe = adin_probe,
+ .config_aneg = adin_config_aneg,
+ .read_status = adin_read_status,
+ .set_loopback = adin_set_loopback,
+ .suspend = adin_suspend,
+ .resume = adin_resume,
+ .get_sqi = adin_get_sqi,
+ .get_sqi_max = adin_get_sqi_max,
+ },
+};
+
+module_phy_driver(adin_driver);
+
+static struct mdio_device_id __maybe_unused adin_tbl[] = {
+ { PHY_ID_MATCH_MODEL(PHY_ID_ADIN1100) },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, adin_tbl);
+MODULE_DESCRIPTION("Analog Devices Industrial Ethernet T1L PHY driver");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/phy/bcm87xx.c b/drivers/net/phy/bcm87xx.c
index 313563482690..cc2858107668 100644
--- a/drivers/net/phy/bcm87xx.c
+++ b/drivers/net/phy/bcm87xx.c
@@ -10,12 +10,12 @@
#define PHY_ID_BCM8706 0x0143bdc1
#define PHY_ID_BCM8727 0x0143bff0
-#define BCM87XX_PMD_RX_SIGNAL_DETECT (MII_ADDR_C45 | 0x1000a)
-#define BCM87XX_10GBASER_PCS_STATUS (MII_ADDR_C45 | 0x30020)
-#define BCM87XX_XGXS_LANE_STATUS (MII_ADDR_C45 | 0x40018)
+#define BCM87XX_PMD_RX_SIGNAL_DETECT 0x000a
+#define BCM87XX_10GBASER_PCS_STATUS 0x0020
+#define BCM87XX_XGXS_LANE_STATUS 0x0018
-#define BCM87XX_LASI_CONTROL (MII_ADDR_C45 | 0x39002)
-#define BCM87XX_LASI_STATUS (MII_ADDR_C45 | 0x39005)
+#define BCM87XX_LASI_CONTROL 0x9002
+#define BCM87XX_LASI_STATUS 0x9005
#if IS_ENABLED(CONFIG_OF_MDIO)
/* Set and/or override some configuration registers based on the
@@ -54,11 +54,10 @@ static int bcm87xx_of_reg_init(struct phy_device *phydev)
u16 reg = be32_to_cpup(paddr++);
u16 mask = be32_to_cpup(paddr++);
u16 val_bits = be32_to_cpup(paddr++);
- u32 regnum = mdiobus_c45_addr(devid, reg);
int val = 0;
if (mask) {
- val = phy_read(phydev, regnum);
+ val = phy_read_mmd(phydev, devid, reg);
if (val < 0) {
ret = val;
goto err;
@@ -67,7 +66,7 @@ static int bcm87xx_of_reg_init(struct phy_device *phydev)
}
val |= val_bits;
- ret = phy_write(phydev, regnum, val);
+ ret = phy_write_mmd(phydev, devid, reg, val);
if (ret < 0)
goto err;
}
@@ -104,21 +103,24 @@ static int bcm87xx_read_status(struct phy_device *phydev)
int pcs_status;
int xgxs_lane_status;
- rx_signal_detect = phy_read(phydev, BCM87XX_PMD_RX_SIGNAL_DETECT);
+ rx_signal_detect = phy_read_mmd(phydev, MDIO_MMD_PMAPMD,
+ BCM87XX_PMD_RX_SIGNAL_DETECT);
if (rx_signal_detect < 0)
return rx_signal_detect;
if ((rx_signal_detect & 1) == 0)
goto no_link;
- pcs_status = phy_read(phydev, BCM87XX_10GBASER_PCS_STATUS);
+ pcs_status = phy_read_mmd(phydev, MDIO_MMD_PCS,
+ BCM87XX_10GBASER_PCS_STATUS);
if (pcs_status < 0)
return pcs_status;
if ((pcs_status & 1) == 0)
goto no_link;
- xgxs_lane_status = phy_read(phydev, BCM87XX_XGXS_LANE_STATUS);
+ xgxs_lane_status = phy_read_mmd(phydev, MDIO_MMD_PHYXS,
+ BCM87XX_XGXS_LANE_STATUS);
if (xgxs_lane_status < 0)
return xgxs_lane_status;
@@ -139,25 +141,27 @@ static int bcm87xx_config_intr(struct phy_device *phydev)
{
int reg, err;
- reg = phy_read(phydev, BCM87XX_LASI_CONTROL);
+ reg = phy_read_mmd(phydev, MDIO_MMD_PCS, BCM87XX_LASI_CONTROL);
if (reg < 0)
return reg;
if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
- err = phy_read(phydev, BCM87XX_LASI_STATUS);
+ err = phy_read_mmd(phydev, MDIO_MMD_PCS, BCM87XX_LASI_STATUS);
if (err)
return err;
reg |= 1;
- err = phy_write(phydev, BCM87XX_LASI_CONTROL, reg);
+ err = phy_write_mmd(phydev, MDIO_MMD_PCS,
+ BCM87XX_LASI_CONTROL, reg);
} else {
reg &= ~1;
- err = phy_write(phydev, BCM87XX_LASI_CONTROL, reg);
+ err = phy_write_mmd(phydev, MDIO_MMD_PCS,
+ BCM87XX_LASI_CONTROL, reg);
if (err)
return err;
- err = phy_read(phydev, BCM87XX_LASI_STATUS);
+ err = phy_read_mmd(phydev, MDIO_MMD_PCS, BCM87XX_LASI_STATUS);
}
return err;
diff --git a/drivers/net/phy/dp83td510.c b/drivers/net/phy/dp83td510.c
new file mode 100644
index 000000000000..1ae792b0daaa
--- /dev/null
+++ b/drivers/net/phy/dp83td510.c
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Driver for the Texas Instruments DP83TD510 PHY
+ * Copyright (c) 2022 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+
+#define DP83TD510E_PHY_ID 0x20000181
+
+/* MDIO_MMD_VEND2 registers */
+#define DP83TD510E_PHY_STS 0x10
+#define DP83TD510E_STS_MII_INT BIT(7)
+#define DP83TD510E_LINK_STATUS BIT(0)
+
+#define DP83TD510E_GEN_CFG 0x11
+#define DP83TD510E_GENCFG_INT_POLARITY BIT(3)
+#define DP83TD510E_GENCFG_INT_EN BIT(1)
+#define DP83TD510E_GENCFG_INT_OE BIT(0)
+
+#define DP83TD510E_INTERRUPT_REG_1 0x12
+#define DP83TD510E_INT1_LINK BIT(13)
+#define DP83TD510E_INT1_LINK_EN BIT(5)
+
+#define DP83TD510E_AN_STAT_1 0x60c
+#define DP83TD510E_MASTER_SLAVE_RESOL_FAIL BIT(15)
+
+static int dp83td510_config_intr(struct phy_device *phydev)
+{
+ int ret;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+ /* Clear any pending interrupts */
+ ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_PHY_STS,
+ 0x0);
+ if (ret)
+ return ret;
+
+ ret = phy_write_mmd(phydev, MDIO_MMD_VEND2,
+ DP83TD510E_INTERRUPT_REG_1,
+ DP83TD510E_INT1_LINK_EN);
+ if (ret)
+ return ret;
+
+ ret = phy_set_bits_mmd(phydev, MDIO_MMD_VEND2,
+ DP83TD510E_GEN_CFG,
+ DP83TD510E_GENCFG_INT_POLARITY |
+ DP83TD510E_GENCFG_INT_EN |
+ DP83TD510E_GENCFG_INT_OE);
+ } else {
+ ret = phy_write_mmd(phydev, MDIO_MMD_VEND2,
+ DP83TD510E_INTERRUPT_REG_1, 0x0);
+ if (ret)
+ return ret;
+
+ ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2,
+ DP83TD510E_GEN_CFG,
+ DP83TD510E_GENCFG_INT_EN);
+ if (ret)
+ return ret;
+
+ /* Clear any pending interrupts */
+ ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_PHY_STS,
+ 0x0);
+ }
+
+ return ret;
+}
+
+static irqreturn_t dp83td510_handle_interrupt(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_PHY_STS);
+ if (ret < 0) {
+ phy_error(phydev);
+ return IRQ_NONE;
+ } else if (!(ret & DP83TD510E_STS_MII_INT)) {
+ return IRQ_NONE;
+ }
+
+ /* Read the current enabled interrupts */
+ ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_INTERRUPT_REG_1);
+ if (ret < 0) {
+ phy_error(phydev);
+ return IRQ_NONE;
+ } else if (!(ret & DP83TD510E_INT1_LINK_EN) ||
+ !(ret & DP83TD510E_INT1_LINK)) {
+ return IRQ_NONE;
+ }
+
+ phy_trigger_machine(phydev);
+
+ return IRQ_HANDLED;
+}
+
+static int dp83td510_read_status(struct phy_device *phydev)
+{
+ u16 phy_sts;
+ int ret;
+
+ phydev->speed = SPEED_UNKNOWN;
+ phydev->duplex = DUPLEX_UNKNOWN;
+ phydev->pause = 0;
+ phydev->asym_pause = 0;
+ linkmode_zero(phydev->lp_advertising);
+
+ phy_sts = phy_read(phydev, DP83TD510E_PHY_STS);
+
+ phydev->link = !!(phy_sts & DP83TD510E_LINK_STATUS);
+ if (phydev->link) {
+ /* This PHY supports only one link mode: 10BaseT1L_Full */
+ phydev->duplex = DUPLEX_FULL;
+ phydev->speed = SPEED_10;
+
+ if (phydev->autoneg == AUTONEG_ENABLE) {
+ ret = genphy_c45_read_lpa(phydev);
+ if (ret)
+ return ret;
+
+ phy_resolve_aneg_linkmode(phydev);
+ }
+ }
+
+ if (phydev->autoneg == AUTONEG_ENABLE) {
+ ret = genphy_c45_baset1_read_status(phydev);
+ if (ret < 0)
+ return ret;
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_VEND2,
+ DP83TD510E_AN_STAT_1);
+ if (ret < 0)
+ return ret;
+
+ if (ret & DP83TD510E_MASTER_SLAVE_RESOL_FAIL)
+ phydev->master_slave_state = MASTER_SLAVE_STATE_ERR;
+ } else {
+ return genphy_c45_pma_baset1_read_master_slave(phydev);
+ }
+
+ return 0;
+}
+
+static int dp83td510_config_aneg(struct phy_device *phydev)
+{
+ bool changed = false;
+ int ret;
+
+ ret = genphy_c45_pma_baset1_setup_master_slave(phydev);
+ if (ret < 0)
+ return ret;
+
+ if (phydev->autoneg == AUTONEG_DISABLE)
+ return genphy_c45_an_disable_aneg(phydev);
+
+ ret = genphy_c45_an_config_aneg(phydev);
+ if (ret < 0)
+ return ret;
+ if (ret > 0)
+ changed = true;
+
+ return genphy_c45_check_and_restart_aneg(phydev, changed);
+}
+
+static int dp83td510_get_features(struct phy_device *phydev)
+{
+ /* This PHY can't respond on MDIO bus if no RMII clock is enabled.
+ * In case RMII mode is used (most meaningful mode for this PHY) and
+ * the PHY do not have own XTAL, and CLK providing MAC is not probed,
+ * we won't be able to read all needed ability registers.
+ * So provide it manually.
+ */
+
+ linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported);
+ linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydev->supported);
+ linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydev->supported);
+ linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT,
+ phydev->supported);
+
+ return 0;
+}
+
+static struct phy_driver dp83td510_driver[] = {
+{
+ PHY_ID_MATCH_MODEL(DP83TD510E_PHY_ID),
+ .name = "TI DP83TD510E",
+
+ .config_aneg = dp83td510_config_aneg,
+ .read_status = dp83td510_read_status,
+ .get_features = dp83td510_get_features,
+ .config_intr = dp83td510_config_intr,
+ .handle_interrupt = dp83td510_handle_interrupt,
+
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+} };
+module_phy_driver(dp83td510_driver);
+
+static struct mdio_device_id __maybe_unused dp83td510_tbl[] = {
+ { PHY_ID_MATCH_MODEL(DP83TD510E_PHY_ID) },
+ { }
+};
+MODULE_DEVICE_TABLE(mdio, dp83td510_tbl);
+
+MODULE_DESCRIPTION("Texas Instruments DP83TD510E PHY driver");
+MODULE_AUTHOR("Oleksij Rempel <kernel@pengutronix.de>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 2702faf7b0f6..47e83c1e9051 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -961,7 +961,21 @@ static int m88e1111_config_init(struct phy_device *phydev)
if (err < 0)
return err;
- return genphy_soft_reset(phydev);
+ err = genphy_soft_reset(phydev);
+ if (err < 0)
+ return err;
+
+ if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
+ /* If the HWCFG_MODE was changed from another mode (such as
+ * 1000BaseX) to SGMII, the state of the support bits may have
+ * also changed now that the PHY has been reset.
+ * Update the PHY abilities accordingly.
+ */
+ err = genphy_read_abilities(phydev);
+ linkmode_or(phydev->advertising, phydev->advertising,
+ phydev->supported);
+ }
+ return err;
}
static int m88e1111_get_downshift(struct phy_device *phydev, u8 *data)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index cd9aa353b653..c34a93403d1e 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -32,6 +32,7 @@
#include <linux/ptp_clock.h>
#include <linux/ptp_classify.h>
#include <linux/net_tstamp.h>
+#include <linux/gpio/consumer.h>
/* Operation Mode Strap Override */
#define MII_KSZPHY_OMSO 0x16
@@ -70,6 +71,27 @@
#define KSZ8081_LMD_SHORT_INDICATOR BIT(12)
#define KSZ8081_LMD_DELTA_TIME_MASK GENMASK(8, 0)
+#define KSZ9x31_LMD 0x12
+#define KSZ9x31_LMD_VCT_EN BIT(15)
+#define KSZ9x31_LMD_VCT_DIS_TX BIT(14)
+#define KSZ9x31_LMD_VCT_PAIR(n) (((n) & 0x3) << 12)
+#define KSZ9x31_LMD_VCT_SEL_RESULT 0
+#define KSZ9x31_LMD_VCT_SEL_THRES_HI BIT(10)
+#define KSZ9x31_LMD_VCT_SEL_THRES_LO BIT(11)
+#define KSZ9x31_LMD_VCT_SEL_MASK GENMASK(11, 10)
+#define KSZ9x31_LMD_VCT_ST_NORMAL 0
+#define KSZ9x31_LMD_VCT_ST_OPEN 1
+#define KSZ9x31_LMD_VCT_ST_SHORT 2
+#define KSZ9x31_LMD_VCT_ST_FAIL 3
+#define KSZ9x31_LMD_VCT_ST_MASK GENMASK(9, 8)
+#define KSZ9x31_LMD_VCT_DATA_REFLECTED_INVALID BIT(7)
+#define KSZ9x31_LMD_VCT_DATA_SIG_WAIT_TOO_LONG BIT(6)
+#define KSZ9x31_LMD_VCT_DATA_MASK100 BIT(5)
+#define KSZ9x31_LMD_VCT_DATA_NLP_FLP BIT(4)
+#define KSZ9x31_LMD_VCT_DATA_LO_PULSE_MASK GENMASK(3, 2)
+#define KSZ9x31_LMD_VCT_DATA_HI_PULSE_MASK GENMASK(1, 0)
+#define KSZ9x31_LMD_VCT_DATA_MASK GENMASK(7, 0)
+
/* Lan8814 general Interrupt control/status reg in GPHY specific block. */
#define LAN8814_INTC 0x18
#define LAN8814_INTS 0x1B
@@ -280,6 +302,7 @@ struct kszphy_priv {
struct kszphy_ptp_priv ptp_priv;
const struct kszphy_type *type;
int led_mode;
+ u16 vct_ctrl1000;
bool rmii_ref_clk_sel;
bool rmii_ref_clk_sel_val;
u64 stats[ARRAY_SIZE(kszphy_hw_stats)];
@@ -1326,6 +1349,199 @@ static int ksz9031_read_status(struct phy_device *phydev)
return 0;
}
+static int ksz9x31_cable_test_start(struct phy_device *phydev)
+{
+ struct kszphy_priv *priv = phydev->priv;
+ int ret;
+
+ /* KSZ9131RNX, DS00002841B-page 38, 4.14 LinkMD (R) Cable Diagnostic
+ * Prior to running the cable diagnostics, Auto-negotiation should
+ * be disabled, full duplex set and the link speed set to 1000Mbps
+ * via the Basic Control Register.
+ */
+ ret = phy_modify(phydev, MII_BMCR,
+ BMCR_SPEED1000 | BMCR_FULLDPLX |
+ BMCR_ANENABLE | BMCR_SPEED100,
+ BMCR_SPEED1000 | BMCR_FULLDPLX);
+ if (ret)
+ return ret;
+
+ /* KSZ9131RNX, DS00002841B-page 38, 4.14 LinkMD (R) Cable Diagnostic
+ * The Master-Slave configuration should be set to Slave by writing
+ * a value of 0x1000 to the Auto-Negotiation Master Slave Control
+ * Register.
+ */
+ ret = phy_read(phydev, MII_CTRL1000);
+ if (ret < 0)
+ return ret;
+
+ /* Cache these bits, they need to be restored once LinkMD finishes. */
+ priv->vct_ctrl1000 = ret & (CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER);
+ ret &= ~(CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER);
+ ret |= CTL1000_ENABLE_MASTER;
+
+ return phy_write(phydev, MII_CTRL1000, ret);
+}
+
+static int ksz9x31_cable_test_result_trans(u16 status)
+{
+ switch (FIELD_GET(KSZ9x31_LMD_VCT_ST_MASK, status)) {
+ case KSZ9x31_LMD_VCT_ST_NORMAL:
+ return ETHTOOL_A_CABLE_RESULT_CODE_OK;
+ case KSZ9x31_LMD_VCT_ST_OPEN:
+ return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
+ case KSZ9x31_LMD_VCT_ST_SHORT:
+ return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
+ case KSZ9x31_LMD_VCT_ST_FAIL:
+ fallthrough;
+ default:
+ return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
+ }
+}
+
+static bool ksz9x31_cable_test_failed(u16 status)
+{
+ int stat = FIELD_GET(KSZ9x31_LMD_VCT_ST_MASK, status);
+
+ return stat == KSZ9x31_LMD_VCT_ST_FAIL;
+}
+
+static bool ksz9x31_cable_test_fault_length_valid(u16 status)
+{
+ switch (FIELD_GET(KSZ9x31_LMD_VCT_ST_MASK, status)) {
+ case KSZ9x31_LMD_VCT_ST_OPEN:
+ fallthrough;
+ case KSZ9x31_LMD_VCT_ST_SHORT:
+ return true;
+ }
+ return false;
+}
+
+static int ksz9x31_cable_test_fault_length(struct phy_device *phydev, u16 stat)
+{
+ int dt = FIELD_GET(KSZ9x31_LMD_VCT_DATA_MASK, stat);
+
+ /* KSZ9131RNX, DS00002841B-page 38, 4.14 LinkMD (R) Cable Diagnostic
+ *
+ * distance to fault = (VCT_DATA - 22) * 4 / cable propagation velocity
+ */
+ if ((phydev->phy_id & MICREL_PHY_ID_MASK) == PHY_ID_KSZ9131)
+ dt = clamp(dt - 22, 0, 255);
+
+ return (dt * 400) / 10;
+}
+
+static int ksz9x31_cable_test_wait_for_completion(struct phy_device *phydev)
+{
+ int val, ret;
+
+ ret = phy_read_poll_timeout(phydev, KSZ9x31_LMD, val,
+ !(val & KSZ9x31_LMD_VCT_EN),
+ 30000, 100000, true);
+
+ return ret < 0 ? ret : 0;
+}
+
+static int ksz9x31_cable_test_get_pair(int pair)
+{
+ static const int ethtool_pair[] = {
+ ETHTOOL_A_CABLE_PAIR_A,
+ ETHTOOL_A_CABLE_PAIR_B,
+ ETHTOOL_A_CABLE_PAIR_C,
+ ETHTOOL_A_CABLE_PAIR_D,
+ };
+
+ return ethtool_pair[pair];
+}
+
+static int ksz9x31_cable_test_one_pair(struct phy_device *phydev, int pair)
+{
+ int ret, val;
+
+ /* KSZ9131RNX, DS00002841B-page 38, 4.14 LinkMD (R) Cable Diagnostic
+ * To test each individual cable pair, set the cable pair in the Cable
+ * Diagnostics Test Pair (VCT_PAIR[1:0]) field of the LinkMD Cable
+ * Diagnostic Register, along with setting the Cable Diagnostics Test
+ * Enable (VCT_EN) bit. The Cable Diagnostics Test Enable (VCT_EN) bit
+ * will self clear when the test is concluded.
+ */
+ ret = phy_write(phydev, KSZ9x31_LMD,
+ KSZ9x31_LMD_VCT_EN | KSZ9x31_LMD_VCT_PAIR(pair));
+ if (ret)
+ return ret;
+
+ ret = ksz9x31_cable_test_wait_for_completion(phydev);
+ if (ret)
+ return ret;
+
+ val = phy_read(phydev, KSZ9x31_LMD);
+ if (val < 0)
+ return val;
+
+ if (ksz9x31_cable_test_failed(val))
+ return -EAGAIN;
+
+ ret = ethnl_cable_test_result(phydev,
+ ksz9x31_cable_test_get_pair(pair),
+ ksz9x31_cable_test_result_trans(val));
+ if (ret)
+ return ret;
+
+ if (!ksz9x31_cable_test_fault_length_valid(val))
+ return 0;
+
+ return ethnl_cable_test_fault_length(phydev,
+ ksz9x31_cable_test_get_pair(pair),
+ ksz9x31_cable_test_fault_length(phydev, val));
+}
+
+static int ksz9x31_cable_test_get_status(struct phy_device *phydev,
+ bool *finished)
+{
+ struct kszphy_priv *priv = phydev->priv;
+ unsigned long pair_mask = 0xf;
+ int retries = 20;
+ int pair, ret, rv;
+
+ *finished = false;
+
+ /* Try harder if link partner is active */
+ while (pair_mask && retries--) {
+ for_each_set_bit(pair, &pair_mask, 4) {
+ ret = ksz9x31_cable_test_one_pair(phydev, pair);
+ if (ret == -EAGAIN)
+ continue;
+ if (ret < 0)
+ return ret;
+ clear_bit(pair, &pair_mask);
+ }
+ /* If link partner is in autonegotiation mode it will send 2ms
+ * of FLPs with at least 6ms of silence.
+ * Add 2ms sleep to have better chances to hit this silence.
+ */
+ if (pair_mask)
+ usleep_range(2000, 3000);
+ }
+
+ /* Report remaining unfinished pair result as unknown. */
+ for_each_set_bit(pair, &pair_mask, 4) {
+ ret = ethnl_cable_test_result(phydev,
+ ksz9x31_cable_test_get_pair(pair),
+ ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC);
+ }
+
+ *finished = true;
+
+ /* Restore cached bits from before LinkMD got started. */
+ rv = phy_modify(phydev, MII_CTRL1000,
+ CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER,
+ priv->vct_ctrl1000);
+ if (rv)
+ return rv;
+
+ return ret;
+}
+
static int ksz8873mll_config_aneg(struct phy_device *phydev)
{
return 0;
@@ -2513,6 +2729,10 @@ static void lan8814_ptp_init(struct phy_device *phydev)
struct kszphy_ptp_priv *ptp_priv = &priv->ptp_priv;
u32 temp;
+ if (!IS_ENABLED(CONFIG_PTP_1588_CLOCK) ||
+ !IS_ENABLED(CONFIG_NETWORK_PHY_TIMESTAMPING))
+ return;
+
lanphy_write_page_reg(phydev, 5, TSU_HARD_RESET, TSU_HARD_RESET_);
temp = lanphy_read_page_reg(phydev, 5, PTP_TX_MOD);
@@ -2551,6 +2771,10 @@ static int lan8814_ptp_probe_once(struct phy_device *phydev)
{
struct lan8814_shared_priv *shared = phydev->shared->priv;
+ if (!IS_ENABLED(CONFIG_PTP_1588_CLOCK) ||
+ !IS_ENABLED(CONFIG_NETWORK_PHY_TIMESTAMPING))
+ return 0;
+
/* Initialise shared lock for clock*/
mutex_init(&shared->shared_lock);
@@ -2613,6 +2837,21 @@ static int lan8814_config_init(struct phy_device *phydev)
return 0;
}
+static int lan8814_release_coma_mode(struct phy_device *phydev)
+{
+ struct gpio_desc *gpiod;
+
+ gpiod = devm_gpiod_get_optional(&phydev->mdio.dev, "coma-mode",
+ GPIOD_OUT_HIGH_OPEN_DRAIN);
+ if (IS_ERR(gpiod))
+ return PTR_ERR(gpiod);
+
+ gpiod_set_consumer_name(gpiod, "LAN8814 coma mode");
+ gpiod_set_value_cansleep(gpiod, 0);
+
+ return 0;
+}
+
static int lan8814_probe(struct phy_device *phydev)
{
struct kszphy_priv *priv;
@@ -2627,10 +2866,6 @@ static int lan8814_probe(struct phy_device *phydev)
phydev->priv = priv;
- if (!IS_ENABLED(CONFIG_PTP_1588_CLOCK) ||
- !IS_ENABLED(CONFIG_NETWORK_PHY_TIMESTAMPING))
- return 0;
-
/* Strap-in value for PHY address, below register read gives starting
* phy address value
*/
@@ -2639,6 +2874,10 @@ static int lan8814_probe(struct phy_device *phydev)
addr, sizeof(struct lan8814_shared_priv));
if (phy_package_init_once(phydev)) {
+ err = lan8814_release_coma_mode(phydev);
+ if (err)
+ return err;
+
err = lan8814_ptp_probe_once(phydev);
if (err)
return err;
@@ -2806,6 +3045,7 @@ static struct phy_driver ksphy_driver[] = {
.phy_id = PHY_ID_KSZ9031,
.phy_id_mask = MICREL_PHY_ID_MASK,
.name = "Micrel KSZ9031 Gigabit PHY",
+ .flags = PHY_POLL_CABLE_TEST,
.driver_data = &ksz9021_type,
.probe = kszphy_probe,
.get_features = ksz9031_get_features,
@@ -2819,6 +3059,8 @@ static struct phy_driver ksphy_driver[] = {
.get_stats = kszphy_get_stats,
.suspend = kszphy_suspend,
.resume = kszphy_resume,
+ .cable_test_start = ksz9x31_cable_test_start,
+ .cable_test_get_status = ksz9x31_cable_test_get_status,
}, {
.phy_id = PHY_ID_LAN8814,
.phy_id_mask = MICREL_PHY_ID_MASK,
@@ -2853,6 +3095,7 @@ static struct phy_driver ksphy_driver[] = {
.phy_id_mask = MICREL_PHY_ID_MASK,
.name = "Microchip KSZ9131 Gigabit PHY",
/* PHY_GBIT_FEATURES */
+ .flags = PHY_POLL_CABLE_TEST,
.driver_data = &ksz9021_type,
.probe = kszphy_probe,
.config_init = ksz9131_config_init,
@@ -2863,6 +3106,8 @@ static struct phy_driver ksphy_driver[] = {
.get_stats = kszphy_get_stats,
.suspend = kszphy_suspend,
.resume = kszphy_resume,
+ .cable_test_start = ksz9x31_cable_test_start,
+ .cable_test_get_status = ksz9x31_cable_test_get_status,
}, {
.phy_id = PHY_ID_KSZ8873MLL,
.phy_id_mask = MICREL_PHY_ID_MASK,
diff --git a/drivers/net/phy/microchip.c b/drivers/net/phy/microchip.c
index 9f1f2b6c97d4..ccecee2524ce 100644
--- a/drivers/net/phy/microchip.c
+++ b/drivers/net/phy/microchip.c
@@ -344,8 +344,12 @@ static int lan88xx_config_aneg(struct phy_device *phydev)
static struct phy_driver microchip_phy_driver[] = {
{
- .phy_id = 0x0007c130,
- .phy_id_mask = 0xfffffff0,
+ .phy_id = 0x0007c132,
+ /* This mask (0xfffffff2) is to differentiate from
+ * LAN8742 (phy_id 0x0007c130 and 0x0007c131)
+ * and allows future phy_id revisions.
+ */
+ .phy_id_mask = 0xfffffff2,
.name = "Microchip LAN88xx",
/* PHY_GBIT_FEATURES */
@@ -369,7 +373,7 @@ static struct phy_driver microchip_phy_driver[] = {
module_phy_driver(microchip_phy_driver);
static struct mdio_device_id __maybe_unused microchip_tbl[] = {
- { 0x0007c130, 0xfffffff0 },
+ { 0x0007c132, 0xfffffff2 },
{ }
};
diff --git a/drivers/net/phy/microchip_t1.c b/drivers/net/phy/microchip_t1.c
index c2c0e361fd3d..d4c93d59bc53 100644
--- a/drivers/net/phy/microchip_t1.c
+++ b/drivers/net/phy/microchip_t1.c
@@ -68,7 +68,12 @@
#define T1_POST_LCK_MUFACT_CFG_REG 0x1C
#define T1_TX_RX_FIFO_CFG_REG 0x02
#define T1_TX_LPF_FIR_CFG_REG 0x55
+#define T1_COEF_CLK_PWR_DN_CFG 0x04
+#define T1_COEF_RW_CTL_CFG 0x0D
#define T1_SQI_CONFIG_REG 0x2E
+#define T1_SQI_CONFIG2_REG 0x4A
+#define T1_DCQ_SQI_REG 0xC3
+#define T1_DCQ_SQI_MSK GENMASK(3, 1)
#define T1_MDIO_CONTROL2_REG 0x10
#define T1_INTERRUPT_SOURCE_REG 0x18
#define T1_INTERRUPT2_SOURCE_REG 0x08
@@ -82,6 +87,9 @@
#define T1_MODE_STAT_REG 0x11
#define T1_LINK_UP_MSK BIT(0)
+/* SQI defines */
+#define LAN87XX_MAX_SQI 0x07
+
#define DRIVER_AUTHOR "Nisar Sayed <nisar.sayed@microchip.com>"
#define DRIVER_DESC "Microchip LAN87XX/LAN937x T1 PHY driver"
@@ -346,9 +354,20 @@ static int lan87xx_phy_init(struct phy_device *phydev)
T1_TX_LPF_FIR_CFG_REG, 0x1011, 0 },
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
T1_TX_LPF_FIR_CFG_REG, 0x1000, 0 },
+ /* Setup SQI measurement */
+ { PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
+ T1_COEF_CLK_PWR_DN_CFG, 0x16d6, 0 },
/* SQI enable */
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
T1_SQI_CONFIG_REG, 0x9572, 0 },
+ /* SQI select mode 5 */
+ { PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
+ T1_SQI_CONFIG2_REG, 0x0001, 0 },
+ /* Throws the first SQI reading */
+ { PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
+ T1_COEF_RW_CTL_CFG, 0x0301, 0 },
+ { PHYACC_ATTR_MODE_READ, PHYACC_ATTR_BANK_DSP,
+ T1_DCQ_SQI_REG, 0, 0 },
/* Flag LPS and WUR as idle errors */
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_SMI,
T1_MDIO_CONTROL2_REG, 0x0014, 0 },
@@ -724,6 +743,31 @@ static int lan87xx_config_aneg(struct phy_device *phydev)
return phy_modify_changed(phydev, MII_CTRL1000, CTL1000_AS_MASTER, ctl);
}
+static int lan87xx_get_sqi(struct phy_device *phydev)
+{
+ u8 sqi_value = 0;
+ int rc;
+
+ rc = access_ereg(phydev, PHYACC_ATTR_MODE_WRITE,
+ PHYACC_ATTR_BANK_DSP, T1_COEF_RW_CTL_CFG, 0x0301);
+ if (rc < 0)
+ return rc;
+
+ rc = access_ereg(phydev, PHYACC_ATTR_MODE_READ,
+ PHYACC_ATTR_BANK_DSP, T1_DCQ_SQI_REG, 0x0);
+ if (rc < 0)
+ return rc;
+
+ sqi_value = FIELD_GET(T1_DCQ_SQI_MSK, rc);
+
+ return sqi_value;
+}
+
+static int lan87xx_get_sqi_max(struct phy_device *phydev)
+{
+ return LAN87XX_MAX_SQI;
+}
+
static struct phy_driver microchip_t1_phy_driver[] = {
{
PHY_ID_MATCH_MODEL(PHY_ID_LAN87XX),
@@ -737,6 +781,8 @@ static struct phy_driver microchip_t1_phy_driver[] = {
.resume = genphy_resume,
.config_aneg = lan87xx_config_aneg,
.read_status = lan87xx_read_status,
+ .get_sqi = lan87xx_get_sqi,
+ .get_sqi_max = lan87xx_get_sqi_max,
.cable_test_start = lan87xx_cable_test_start,
.cable_test_get_status = lan87xx_cable_test_get_status,
},
@@ -746,10 +792,14 @@ static struct phy_driver microchip_t1_phy_driver[] = {
.flags = PHY_POLL_CABLE_TEST,
.features = PHY_BASIC_T1_FEATURES,
.config_init = lan87xx_config_init,
+ .config_intr = lan87xx_phy_config_intr,
+ .handle_interrupt = lan87xx_handle_interrupt,
.suspend = genphy_suspend,
.resume = genphy_resume,
.config_aneg = lan87xx_config_aneg,
.read_status = lan87xx_read_status,
+ .get_sqi = lan87xx_get_sqi,
+ .get_sqi_max = lan87xx_get_sqi_max,
.cable_test_start = lan87xx_cable_test_start,
.cable_test_get_status = lan87xx_cable_test_get_status,
}
diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
index db709d30bf84..29b1df03f3e8 100644
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -9,6 +9,25 @@
#include <linux/phy.h>
/**
+ * genphy_c45_baset1_able - checks if the PMA has BASE-T1 extended abilities
+ * @phydev: target phy_device struct
+ */
+static bool genphy_c45_baset1_able(struct phy_device *phydev)
+{
+ int val;
+
+ if (phydev->pma_extable == -ENODATA) {
+ val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_EXTABLE);
+ if (val < 0)
+ return false;
+
+ phydev->pma_extable = val;
+ }
+
+ return !!(phydev->pma_extable & MDIO_PMA_EXTABLE_BT1);
+}
+
+/**
* genphy_c45_pma_can_sleep - checks if the PMA have sleep support
* @phydev: target phy_device struct
*/
@@ -52,6 +71,36 @@ int genphy_c45_pma_suspend(struct phy_device *phydev)
EXPORT_SYMBOL_GPL(genphy_c45_pma_suspend);
/**
+ * genphy_c45_pma_baset1_setup_master_slave - configures forced master/slave
+ * role of BaseT1 devices.
+ * @phydev: target phy_device struct
+ */
+int genphy_c45_pma_baset1_setup_master_slave(struct phy_device *phydev)
+{
+ int ctl = 0;
+
+ switch (phydev->master_slave_set) {
+ case MASTER_SLAVE_CFG_MASTER_PREFERRED:
+ case MASTER_SLAVE_CFG_MASTER_FORCE:
+ ctl = MDIO_PMA_PMD_BT1_CTRL_CFG_MST;
+ break;
+ case MASTER_SLAVE_CFG_SLAVE_FORCE:
+ case MASTER_SLAVE_CFG_SLAVE_PREFERRED:
+ break;
+ case MASTER_SLAVE_CFG_UNKNOWN:
+ case MASTER_SLAVE_CFG_UNSUPPORTED:
+ return 0;
+ default:
+ phydev_warn(phydev, "Unsupported Master/Slave mode\n");
+ return -EOPNOTSUPP;
+ }
+
+ return phy_modify_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_PMD_BT1_CTRL,
+ MDIO_PMA_PMD_BT1_CTRL_CFG_MST, ctl);
+}
+EXPORT_SYMBOL_GPL(genphy_c45_pma_baset1_setup_master_slave);
+
+/**
* genphy_c45_pma_setup_forced - configures a forced speed
* @phydev: target phy_device struct
*/
@@ -80,7 +129,10 @@ int genphy_c45_pma_setup_forced(struct phy_device *phydev)
switch (phydev->speed) {
case SPEED_10:
- ctrl2 |= MDIO_PMA_CTRL2_10BT;
+ if (genphy_c45_baset1_able(phydev))
+ ctrl2 |= MDIO_PMA_CTRL2_BASET1;
+ else
+ ctrl2 |= MDIO_PMA_CTRL2_10BT;
break;
case SPEED_100:
ctrl1 |= MDIO_PMA_CTRL1_SPEED100;
@@ -118,10 +170,81 @@ int genphy_c45_pma_setup_forced(struct phy_device *phydev)
if (ret < 0)
return ret;
+ if (genphy_c45_baset1_able(phydev)) {
+ ret = genphy_c45_pma_baset1_setup_master_slave(phydev);
+ if (ret < 0)
+ return ret;
+ }
+
return genphy_c45_an_disable_aneg(phydev);
}
EXPORT_SYMBOL_GPL(genphy_c45_pma_setup_forced);
+/* Sets master/slave preference and supported technologies.
+ * The preference is set in the BIT(4) of BASE-T1 AN
+ * advertisement register 7.515 and whether the status
+ * is forced or not, it is set in the BIT(12) of BASE-T1
+ * AN advertisement register 7.514.
+ * Sets 10BASE-T1L Ability BIT(14) in BASE-T1 autonegotiation
+ * advertisement register [31:16] if supported.
+ */
+static int genphy_c45_baset1_an_config_aneg(struct phy_device *phydev)
+{
+ int changed = 0;
+ u16 adv_l = 0;
+ u16 adv_m = 0;
+ int ret;
+
+ switch (phydev->master_slave_set) {
+ case MASTER_SLAVE_CFG_MASTER_FORCE:
+ case MASTER_SLAVE_CFG_SLAVE_FORCE:
+ adv_l |= MDIO_AN_T1_ADV_L_FORCE_MS;
+ break;
+ case MASTER_SLAVE_CFG_MASTER_PREFERRED:
+ case MASTER_SLAVE_CFG_SLAVE_PREFERRED:
+ break;
+ case MASTER_SLAVE_CFG_UNKNOWN:
+ case MASTER_SLAVE_CFG_UNSUPPORTED:
+ return 0;
+ default:
+ phydev_warn(phydev, "Unsupported Master/Slave mode\n");
+ return -EOPNOTSUPP;
+ }
+
+ switch (phydev->master_slave_set) {
+ case MASTER_SLAVE_CFG_MASTER_FORCE:
+ case MASTER_SLAVE_CFG_MASTER_PREFERRED:
+ adv_m |= MDIO_AN_T1_ADV_M_MST;
+ break;
+ case MASTER_SLAVE_CFG_SLAVE_FORCE:
+ case MASTER_SLAVE_CFG_SLAVE_PREFERRED:
+ break;
+ default:
+ break;
+ }
+
+ adv_l |= linkmode_adv_to_mii_t1_adv_l_t(phydev->advertising);
+
+ ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_T1_ADV_L,
+ (MDIO_AN_T1_ADV_L_FORCE_MS | MDIO_AN_T1_ADV_L_PAUSE_CAP
+ | MDIO_AN_T1_ADV_L_PAUSE_ASYM), adv_l);
+ if (ret < 0)
+ return ret;
+ if (ret > 0)
+ changed = 1;
+
+ adv_m |= linkmode_adv_to_mii_t1_adv_m_t(phydev->advertising);
+
+ ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_T1_ADV_M,
+ MDIO_AN_T1_ADV_M_MST | MDIO_AN_T1_ADV_M_B10L, adv_m);
+ if (ret < 0)
+ return ret;
+ if (ret > 0)
+ changed = 1;
+
+ return changed;
+}
+
/**
* genphy_c45_an_config_aneg - configure advertisement registers
* @phydev: target phy_device struct
@@ -141,6 +264,9 @@ int genphy_c45_an_config_aneg(struct phy_device *phydev)
changed = genphy_config_eee_advert(phydev);
+ if (genphy_c45_baset1_able(phydev))
+ return genphy_c45_baset1_an_config_aneg(phydev);
+
adv = linkmode_adv_to_mii_adv_t(phydev->advertising);
ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE,
@@ -178,8 +304,12 @@ EXPORT_SYMBOL_GPL(genphy_c45_an_config_aneg);
*/
int genphy_c45_an_disable_aneg(struct phy_device *phydev)
{
+ u16 reg = MDIO_CTRL1;
+
+ if (genphy_c45_baset1_able(phydev))
+ reg = MDIO_AN_T1_CTRL;
- return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1,
+ return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, reg,
MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART);
}
EXPORT_SYMBOL_GPL(genphy_c45_an_disable_aneg);
@@ -194,7 +324,12 @@ EXPORT_SYMBOL_GPL(genphy_c45_an_disable_aneg);
*/
int genphy_c45_restart_aneg(struct phy_device *phydev)
{
- return phy_set_bits_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1,
+ u16 reg = MDIO_CTRL1;
+
+ if (genphy_c45_baset1_able(phydev))
+ reg = MDIO_AN_T1_CTRL;
+
+ return phy_set_bits_mmd(phydev, MDIO_MMD_AN, reg,
MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART);
}
EXPORT_SYMBOL_GPL(genphy_c45_restart_aneg);
@@ -210,11 +345,15 @@ EXPORT_SYMBOL_GPL(genphy_c45_restart_aneg);
*/
int genphy_c45_check_and_restart_aneg(struct phy_device *phydev, bool restart)
{
+ u16 reg = MDIO_CTRL1;
int ret;
+ if (genphy_c45_baset1_able(phydev))
+ reg = MDIO_AN_T1_CTRL;
+
if (!restart) {
/* Configure and restart aneg if it wasn't set before */
- ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1);
+ ret = phy_read_mmd(phydev, MDIO_MMD_AN, reg);
if (ret < 0)
return ret;
@@ -242,7 +381,13 @@ EXPORT_SYMBOL_GPL(genphy_c45_check_and_restart_aneg);
*/
int genphy_c45_aneg_done(struct phy_device *phydev)
{
- int val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1);
+ int reg = MDIO_STAT1;
+ int val;
+
+ if (genphy_c45_baset1_able(phydev))
+ reg = MDIO_AN_T1_STAT;
+
+ val = phy_read_mmd(phydev, MDIO_MMD_AN, reg);
return val < 0 ? val : val & MDIO_AN_STAT1_COMPLETE ? 1 : 0;
}
@@ -307,6 +452,49 @@ int genphy_c45_read_link(struct phy_device *phydev)
}
EXPORT_SYMBOL_GPL(genphy_c45_read_link);
+/* Read the Clause 45 defined BASE-T1 AN (7.513) status register to check
+ * if autoneg is complete. If so read the BASE-T1 Autonegotiation
+ * Advertisement registers filling in the link partner advertisement,
+ * pause and asym_pause members in phydev.
+ */
+static int genphy_c45_baset1_read_lpa(struct phy_device *phydev)
+{
+ int val;
+
+ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_STAT);
+ if (val < 0)
+ return val;
+
+ if (!(val & MDIO_AN_STAT1_COMPLETE)) {
+ linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->lp_advertising);
+ mii_t1_adv_l_mod_linkmode_t(phydev->lp_advertising, 0);
+ mii_t1_adv_m_mod_linkmode_t(phydev->lp_advertising, 0);
+
+ phydev->pause = 0;
+ phydev->asym_pause = 0;
+
+ return 0;
+ }
+
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->lp_advertising, 1);
+
+ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_LP_L);
+ if (val < 0)
+ return val;
+
+ mii_t1_adv_l_mod_linkmode_t(phydev->lp_advertising, val);
+ phydev->pause = val & MDIO_AN_T1_ADV_L_PAUSE_CAP ? 1 : 0;
+ phydev->asym_pause = val & MDIO_AN_T1_ADV_L_PAUSE_ASYM ? 1 : 0;
+
+ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_LP_M);
+ if (val < 0)
+ return val;
+
+ mii_t1_adv_m_mod_linkmode_t(phydev->lp_advertising, val);
+
+ return 0;
+}
+
/**
* genphy_c45_read_lpa - read the link partner advertisement and pause
* @phydev: target phy_device struct
@@ -321,6 +509,9 @@ int genphy_c45_read_lpa(struct phy_device *phydev)
{
int val;
+ if (genphy_c45_baset1_able(phydev))
+ return genphy_c45_baset1_read_lpa(phydev);
+
val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1);
if (val < 0)
return val;
@@ -360,6 +551,34 @@ int genphy_c45_read_lpa(struct phy_device *phydev)
EXPORT_SYMBOL_GPL(genphy_c45_read_lpa);
/**
+ * genphy_c45_pma_baset1_read_master_slave - read forced master/slave
+ * configuration
+ * @phydev: target phy_device struct
+ */
+int genphy_c45_pma_baset1_read_master_slave(struct phy_device *phydev)
+{
+ int val;
+
+ phydev->master_slave_state = MASTER_SLAVE_STATE_UNKNOWN;
+ phydev->master_slave_get = MASTER_SLAVE_CFG_UNKNOWN;
+
+ val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_PMD_BT1_CTRL);
+ if (val < 0)
+ return val;
+
+ if (val & MDIO_PMA_PMD_BT1_CTRL_CFG_MST) {
+ phydev->master_slave_get = MASTER_SLAVE_CFG_MASTER_FORCE;
+ phydev->master_slave_state = MASTER_SLAVE_STATE_MASTER;
+ } else {
+ phydev->master_slave_get = MASTER_SLAVE_CFG_SLAVE_FORCE;
+ phydev->master_slave_state = MASTER_SLAVE_STATE_SLAVE;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(genphy_c45_pma_baset1_read_master_slave);
+
+/**
* genphy_c45_read_pma - read link speed etc from PMA
* @phydev: target phy_device struct
*/
@@ -399,6 +618,12 @@ int genphy_c45_read_pma(struct phy_device *phydev)
phydev->duplex = DUPLEX_FULL;
+ if (genphy_c45_baset1_able(phydev)) {
+ val = genphy_c45_pma_baset1_read_master_slave(phydev);
+ if (val < 0)
+ return val;
+ }
+
return 0;
}
EXPORT_SYMBOL_GPL(genphy_c45_read_pma);
@@ -530,12 +755,68 @@ int genphy_c45_pma_read_abilities(struct phy_device *phydev)
phydev->supported,
val & MDIO_PMA_NG_EXTABLE_5GBT);
}
+
+ if (val & MDIO_PMA_EXTABLE_BT1) {
+ val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_PMD_BT1);
+ if (val < 0)
+ return val;
+
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT,
+ phydev->supported,
+ val & MDIO_PMA_PMD_BT1_B10L_ABLE);
+
+ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_STAT);
+ if (val < 0)
+ return val;
+
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
+ phydev->supported,
+ val & MDIO_AN_STAT1_ABLE);
+ }
}
return 0;
}
EXPORT_SYMBOL_GPL(genphy_c45_pma_read_abilities);
+/* Read master/slave preference from registers.
+ * The preference is read from the BIT(4) of BASE-T1 AN
+ * advertisement register 7.515 and whether the preference
+ * is forced or not, it is read from BASE-T1 AN advertisement
+ * register 7.514.
+ */
+int genphy_c45_baset1_read_status(struct phy_device *phydev)
+{
+ int ret;
+ int cfg;
+
+ phydev->master_slave_get = MASTER_SLAVE_CFG_UNKNOWN;
+ phydev->master_slave_state = MASTER_SLAVE_STATE_UNKNOWN;
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_ADV_L);
+ if (ret < 0)
+ return ret;
+
+ cfg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_ADV_M);
+ if (cfg < 0)
+ return cfg;
+
+ if (ret & MDIO_AN_T1_ADV_L_FORCE_MS) {
+ if (cfg & MDIO_AN_T1_ADV_M_MST)
+ phydev->master_slave_get = MASTER_SLAVE_CFG_MASTER_FORCE;
+ else
+ phydev->master_slave_get = MASTER_SLAVE_CFG_SLAVE_FORCE;
+ } else {
+ if (cfg & MDIO_AN_T1_ADV_M_MST)
+ phydev->master_slave_get = MASTER_SLAVE_CFG_MASTER_PREFERRED;
+ else
+ phydev->master_slave_get = MASTER_SLAVE_CFG_SLAVE_PREFERRED;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(genphy_c45_baset1_read_status);
+
/**
* genphy_c45_read_status - read PHY status
* @phydev: target phy_device struct
@@ -560,6 +841,12 @@ int genphy_c45_read_status(struct phy_device *phydev)
if (ret)
return ret;
+ if (genphy_c45_baset1_able(phydev)) {
+ ret = genphy_c45_baset1_read_status(phydev);
+ if (ret < 0)
+ return ret;
+ }
+
phy_resolve_aneg_linkmode(phydev);
} else {
ret = genphy_c45_read_pma(phydev);
diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c
index 2001f3329133..1f2531a1a876 100644
--- a/drivers/net/phy/phy-core.c
+++ b/drivers/net/phy/phy-core.c
@@ -13,7 +13,7 @@
*/
const char *phy_speed_to_str(int speed)
{
- BUILD_BUG_ON_MSG(__ETHTOOL_LINK_MODE_MASK_NBITS != 92,
+ BUILD_BUG_ON_MSG(__ETHTOOL_LINK_MODE_MASK_NBITS != 93,
"Enum ethtool_link_mode_bit_indices and phylib are out of sync. "
"If a speed or mode has been added please update phy_speed_to_str "
"and the PHY settings array.\n");
@@ -176,6 +176,7 @@ static const struct phy_setting settings[] = {
/* 10M */
PHY_SETTING( 10, FULL, 10baseT_Full ),
PHY_SETTING( 10, HALF, 10baseT_Half ),
+ PHY_SETTING( 10, FULL, 10baseT1L_Full ),
};
#undef PHY_SETTING
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index f122026c4682..ef62f357b76d 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -295,20 +295,20 @@ int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd)
if (mdio_phy_id_is_c45(mii_data->phy_id)) {
prtad = mdio_phy_id_prtad(mii_data->phy_id);
devad = mdio_phy_id_devad(mii_data->phy_id);
- devad = mdiobus_c45_addr(devad, mii_data->reg_num);
+ mii_data->val_out = mdiobus_c45_read(
+ phydev->mdio.bus, prtad, devad,
+ mii_data->reg_num);
} else {
- prtad = mii_data->phy_id;
- devad = mii_data->reg_num;
+ mii_data->val_out = mdiobus_read(
+ phydev->mdio.bus, mii_data->phy_id,
+ mii_data->reg_num);
}
- mii_data->val_out = mdiobus_read(phydev->mdio.bus, prtad,
- devad);
return 0;
case SIOCSMIIREG:
if (mdio_phy_id_is_c45(mii_data->phy_id)) {
prtad = mdio_phy_id_prtad(mii_data->phy_id);
devad = mdio_phy_id_devad(mii_data->phy_id);
- devad = mdiobus_c45_addr(devad, mii_data->reg_num);
} else {
prtad = mii_data->phy_id;
devad = mii_data->reg_num;
@@ -351,7 +351,11 @@ int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd)
}
}
- mdiobus_write(phydev->mdio.bus, prtad, devad, val);
+ if (mdio_phy_id_is_c45(mii_data->phy_id))
+ mdiobus_c45_write(phydev->mdio.bus, prtad, devad,
+ mii_data->reg_num, val);
+ else
+ mdiobus_write(phydev->mdio.bus, prtad, devad, val);
if (prtad == phydev->mdio.addr &&
devad == MII_BMCR &&
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 8406ac739def..431a8719c635 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -90,8 +90,9 @@ const int phy_10_100_features_array[4] = {
};
EXPORT_SYMBOL_GPL(phy_10_100_features_array);
-const int phy_basic_t1_features_array[2] = {
+const int phy_basic_t1_features_array[3] = {
ETHTOOL_LINK_MODE_TP_BIT,
+ ETHTOOL_LINK_MODE_10baseT1L_Full_BIT,
ETHTOOL_LINK_MODE_100baseT1_Full_BIT,
};
EXPORT_SYMBOL_GPL(phy_basic_t1_features_array);
@@ -599,6 +600,7 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, u32 phy_id,
dev->autoneg = AUTONEG_ENABLE;
+ dev->pma_extable = -ENODATA;
dev->is_c45 = is_c45;
dev->phy_id = phy_id;
if (c45_ids)
@@ -1449,6 +1451,8 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
phydev->state = PHY_READY;
+ phydev->interrupts = PHY_INTERRUPT_DISABLED;
+
/* Port is set to PORT_TP by default and the actual PHY driver will set
* it to different value depending on the PHY configuration. If we have
* the generic PHY driver we can't figure it out, thus set the old
@@ -1471,10 +1475,6 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
if (err)
goto error;
- err = phy_disable_interrupts(phydev);
- if (err)
- return err;
-
phy_resume(phydev);
phy_led_triggers_register(phydev);
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 06943889d747..066684b80919 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -168,8 +168,10 @@ static void phylink_caps_to_linkmodes(unsigned long *linkmodes,
if (caps & MAC_10HD)
__set_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, linkmodes);
- if (caps & MAC_10FD)
+ if (caps & MAC_10FD) {
__set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, linkmodes);
+ __set_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT, linkmodes);
+ }
if (caps & MAC_100HD) {
__set_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, linkmodes);
@@ -2301,8 +2303,11 @@ static int phylink_phy_read(struct phylink *pl, unsigned int phy_id,
if (mdio_phy_id_is_c45(phy_id)) {
prtad = mdio_phy_id_prtad(phy_id);
devad = mdio_phy_id_devad(phy_id);
- devad = mdiobus_c45_addr(devad, reg);
- } else if (phydev->is_c45) {
+ return mdiobus_c45_read(pl->phydev->mdio.bus, prtad, devad,
+ reg);
+ }
+
+ if (phydev->is_c45) {
switch (reg) {
case MII_BMCR:
case MII_BMSR:
@@ -2324,12 +2329,11 @@ static int phylink_phy_read(struct phylink *pl, unsigned int phy_id,
return -EINVAL;
}
prtad = phy_id;
- devad = mdiobus_c45_addr(devad, reg);
- } else {
- prtad = phy_id;
- devad = reg;
+ return mdiobus_c45_read(pl->phydev->mdio.bus, prtad, devad,
+ reg);
}
- return mdiobus_read(pl->phydev->mdio.bus, prtad, devad);
+
+ return mdiobus_read(pl->phydev->mdio.bus, phy_id, reg);
}
static int phylink_phy_write(struct phylink *pl, unsigned int phy_id,
@@ -2341,8 +2345,11 @@ static int phylink_phy_write(struct phylink *pl, unsigned int phy_id,
if (mdio_phy_id_is_c45(phy_id)) {
prtad = mdio_phy_id_prtad(phy_id);
devad = mdio_phy_id_devad(phy_id);
- devad = mdiobus_c45_addr(devad, reg);
- } else if (phydev->is_c45) {
+ return mdiobus_c45_write(pl->phydev->mdio.bus, prtad, devad,
+ reg, val);
+ }
+
+ if (phydev->is_c45) {
switch (reg) {
case MII_BMCR:
case MII_BMSR:
@@ -2363,14 +2370,11 @@ static int phylink_phy_write(struct phylink *pl, unsigned int phy_id,
default:
return -EINVAL;
}
- prtad = phy_id;
- devad = mdiobus_c45_addr(devad, reg);
- } else {
- prtad = phy_id;
- devad = reg;
+ return mdiobus_c45_write(pl->phydev->mdio.bus, phy_id, devad,
+ reg, val);
}
- return mdiobus_write(phydev->mdio.bus, prtad, devad, val);
+ return mdiobus_write(phydev->mdio.bus, phy_id, reg, val);
}
static int phylink_mii_read(struct phylink *pl, unsigned int phy_id,
@@ -2778,34 +2782,6 @@ static const struct sfp_upstream_ops sfp_phylink_ops = {
/* Helpers for MAC drivers */
-/**
- * phylink_helper_basex_speed() - 1000BaseX/2500BaseX helper
- * @state: a pointer to a &struct phylink_link_state
- *
- * Inspect the interface mode, advertising mask or forced speed and
- * decide whether to run at 2.5Gbit or 1Gbit appropriately, switching
- * the interface mode to suit. @state->interface is appropriately
- * updated, and the advertising mask has the "other" baseX_Full flag
- * cleared.
- */
-void phylink_helper_basex_speed(struct phylink_link_state *state)
-{
- if (phy_interface_mode_is_8023z(state->interface)) {
- bool want_2500 = state->an_enabled ?
- phylink_test(state->advertising, 2500baseX_Full) :
- state->speed == SPEED_2500;
-
- if (want_2500) {
- phylink_clear(state->advertising, 1000baseX_Full);
- state->interface = PHY_INTERFACE_MODE_2500BASEX;
- } else {
- phylink_clear(state->advertising, 2500baseX_Full);
- state->interface = PHY_INTERFACE_MODE_1000BASEX;
- }
- }
-}
-EXPORT_SYMBOL_GPL(phylink_helper_basex_speed);
-
static void phylink_decode_c37_word(struct phylink_link_state *state,
uint16_t config_reg, int speed)
{
diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index d8cac02a79b9..92225d0fc246 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -483,6 +483,36 @@ static struct phy_driver smsc_phy_driver[] = {
.suspend = genphy_suspend,
.resume = genphy_resume,
+}, {
+ .phy_id = 0x0007c130, /* 0x0007c130 and 0x0007c131 */
+ /* This mask (0xfffffff2) is to differentiate from
+ * LAN88xx (phy_id 0x0007c132)
+ * and allows future phy_id revisions.
+ */
+ .phy_id_mask = 0xfffffff2,
+ .name = "Microchip LAN8742",
+
+ /* PHY_BASIC_FEATURES */
+ .flags = PHY_RST_AFTER_CLK_EN,
+
+ .probe = smsc_phy_probe,
+
+ /* basic functions */
+ .read_status = lan87xx_read_status,
+ .config_init = smsc_phy_config_init,
+ .soft_reset = smsc_phy_reset,
+
+ /* IRQ related */
+ .config_intr = smsc_phy_config_intr,
+ .handle_interrupt = smsc_phy_handle_interrupt,
+
+ /* Statistics */
+ .get_sset_count = smsc_get_sset_count,
+ .get_strings = smsc_get_strings,
+ .get_stats = smsc_get_stats,
+
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
} };
module_phy_driver(smsc_phy_driver);
@@ -498,6 +528,7 @@ static struct mdio_device_id __maybe_unused smsc_tbl[] = {
{ 0x0007c0d0, 0xfffffff0 },
{ 0x0007c0f0, 0xfffffff0 },
{ 0x0007c110, 0xfffffff0 },
+ { 0x0007c130, 0xfffffff2 },
{ }
};
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.