aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/qlge
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/qlge')
-rw-r--r--drivers/net/qlge/qlge.h11
-rw-r--r--drivers/net/qlge/qlge_main.c177
-rw-r--r--drivers/net/qlge/qlge_mpi.c118
3 files changed, 245 insertions, 61 deletions
diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index 3ec6e85587a2..c2383adcd527 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -95,6 +95,7 @@ enum {
/* Misc. stuff */
MAILBOX_COUNT = 16,
+ MAILBOX_TIMEOUT = 5,
PROC_ADDR_RDY = (1 << 31),
PROC_ADDR_R = (1 << 30),
@@ -803,6 +804,12 @@ enum {
MB_CMD_SET_PORT_CFG = 0x00000122,
MB_CMD_GET_PORT_CFG = 0x00000123,
MB_CMD_GET_LINK_STS = 0x00000124,
+ MB_CMD_SET_MGMNT_TFK_CTL = 0x00000160, /* Set Mgmnt Traffic Control */
+ MB_SET_MPI_TFK_STOP = (1 << 0),
+ MB_SET_MPI_TFK_RESUME = (1 << 1),
+ MB_CMD_GET_MGMNT_TFK_CTL = 0x00000161, /* Get Mgmnt Traffic Control */
+ MB_GET_MPI_TFK_STOPPED = (1 << 0),
+ MB_GET_MPI_TFK_FIFO_EMPTY = (1 << 1),
/* Mailbox Command Status. */
MB_CMD_STS_GOOD = 0x00004000, /* Success. */
@@ -1168,7 +1175,7 @@ struct ricb {
#define RSS_RI6 0x40
#define RSS_RT6 0x80
__le16 mask;
- __le32 hash_cq_id[256];
+ u8 hash_cq_id[1024];
__le32 ipv6_hash_key[10];
__le32 ipv4_hash_key[4];
} __attribute((packed));
@@ -1606,6 +1613,8 @@ int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data);
int ql_mb_about_fw(struct ql_adapter *qdev);
void ql_link_on(struct ql_adapter *qdev);
void ql_link_off(struct ql_adapter *qdev);
+int ql_mb_set_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 control);
+int ql_wait_fifo_empty(struct ql_adapter *qdev);
#if 1
#define QL_ALL_DUMP
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 61680715cde0..a2fc70a0d0cc 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -320,6 +320,37 @@ static int ql_set_mac_addr_reg(struct ql_adapter *qdev, u8 *addr, u32 type,
switch (type) {
case MAC_ADDR_TYPE_MULTI_MAC:
+ {
+ u32 upper = (addr[0] << 8) | addr[1];
+ u32 lower = (addr[2] << 24) | (addr[3] << 16) |
+ (addr[4] << 8) | (addr[5]);
+
+ status =
+ ql_wait_reg_rdy(qdev,
+ MAC_ADDR_IDX, MAC_ADDR_MW, 0);
+ if (status)
+ goto exit;
+ ql_write32(qdev, MAC_ADDR_IDX, (offset++) |
+ (index << MAC_ADDR_IDX_SHIFT) |
+ type | MAC_ADDR_E);
+ ql_write32(qdev, MAC_ADDR_DATA, lower);
+ status =
+ ql_wait_reg_rdy(qdev,
+ MAC_ADDR_IDX, MAC_ADDR_MW, 0);
+ if (status)
+ goto exit;
+ ql_write32(qdev, MAC_ADDR_IDX, (offset++) |
+ (index << MAC_ADDR_IDX_SHIFT) |
+ type | MAC_ADDR_E);
+
+ ql_write32(qdev, MAC_ADDR_DATA, upper);
+ status =
+ ql_wait_reg_rdy(qdev,
+ MAC_ADDR_IDX, MAC_ADDR_MW, 0);
+ if (status)
+ goto exit;
+ break;
+ }
case MAC_ADDR_TYPE_CAM_MAC:
{
u32 cam_output;
@@ -365,16 +396,14 @@ static int ql_set_mac_addr_reg(struct ql_adapter *qdev, u8 *addr, u32 type,
and possibly the function id. Right now we hardcode
the route field to NIC core.
*/
- if (type == MAC_ADDR_TYPE_CAM_MAC) {
- cam_output = (CAM_OUT_ROUTE_NIC |
- (qdev->
- func << CAM_OUT_FUNC_SHIFT) |
- (0 << CAM_OUT_CQ_ID_SHIFT));
- if (qdev->vlgrp)
- cam_output |= CAM_OUT_RV;
- /* route to NIC core */
- ql_write32(qdev, MAC_ADDR_DATA, cam_output);
- }
+ cam_output = (CAM_OUT_ROUTE_NIC |
+ (qdev->
+ func << CAM_OUT_FUNC_SHIFT) |
+ (0 << CAM_OUT_CQ_ID_SHIFT));
+ if (qdev->vlgrp)
+ cam_output |= CAM_OUT_RV;
+ /* route to NIC core */
+ ql_write32(qdev, MAC_ADDR_DATA, cam_output);
break;
}
case MAC_ADDR_TYPE_VLAN:
@@ -546,14 +575,14 @@ static int ql_set_routing_reg(struct ql_adapter *qdev, u32 index, u32 mask,
}
case RT_IDX_MCAST: /* Pass up All Multicast frames. */
{
- value = RT_IDX_DST_CAM_Q | /* dest */
+ value = RT_IDX_DST_DFLT_Q | /* dest */
RT_IDX_TYPE_NICQ | /* type */
(RT_IDX_ALLMULTI_SLOT << RT_IDX_IDX_SHIFT);/* index */
break;
}
case RT_IDX_MCAST_MATCH: /* Pass up matched Multicast frames. */
{
- value = RT_IDX_DST_CAM_Q | /* dest */
+ value = RT_IDX_DST_DFLT_Q | /* dest */
RT_IDX_TYPE_NICQ | /* type */
(RT_IDX_MCAST_MATCH_SLOT << RT_IDX_IDX_SHIFT);/* index */
break;
@@ -3077,6 +3106,12 @@ err_irq:
static int ql_start_rss(struct ql_adapter *qdev)
{
+ u8 init_hash_seed[] = {0x6d, 0x5a, 0x56, 0xda, 0x25, 0x5b, 0x0e, 0xc2,
+ 0x41, 0x67, 0x25, 0x3d, 0x43, 0xa3, 0x8f,
+ 0xb0, 0xd0, 0xca, 0x2b, 0xcb, 0xae, 0x7b,
+ 0x30, 0xb4, 0x77, 0xcb, 0x2d, 0xa3, 0x80,
+ 0x30, 0xf2, 0x0c, 0x6a, 0x42, 0xb7, 0x3b,
+ 0xbe, 0xac, 0x01, 0xfa};
struct ricb *ricb = &qdev->ricb;
int status = 0;
int i;
@@ -3086,21 +3121,17 @@ static int ql_start_rss(struct ql_adapter *qdev)
ricb->base_cq = RSS_L4K;
ricb->flags =
- (RSS_L6K | RSS_LI | RSS_LB | RSS_LM | RSS_RI4 | RSS_RI6 | RSS_RT4 |
- RSS_RT6);
- ricb->mask = cpu_to_le16(qdev->rss_ring_count - 1);
+ (RSS_L6K | RSS_LI | RSS_LB | RSS_LM | RSS_RT4 | RSS_RT6);
+ ricb->mask = cpu_to_le16((u16)(0x3ff));
/*
* Fill out the Indirection Table.
*/
- for (i = 0; i < 256; i++)
- hash_id[i] = i & (qdev->rss_ring_count - 1);
+ for (i = 0; i < 1024; i++)
+ hash_id[i] = (i & (qdev->rss_ring_count - 1));
- /*
- * Random values for the IPv6 and IPv4 Hash Keys.
- */
- get_random_bytes((void *)&ricb->ipv6_hash_key[0], 40);
- get_random_bytes((void *)&ricb->ipv4_hash_key[0], 16);
+ memcpy((void *)&ricb->ipv6_hash_key[0], init_hash_seed, 40);
+ memcpy((void *)&ricb->ipv4_hash_key[0], init_hash_seed, 16);
QPRINTK(qdev, IFUP, DEBUG, "Initializing RSS.\n");
@@ -3239,6 +3270,13 @@ static int ql_adapter_initialize(struct ql_adapter *qdev)
ql_write32(qdev, SPLT_HDR, SPLT_HDR_EP |
min(SMALL_BUFFER_SIZE, MAX_SPLIT_SIZE));
+ /* Set RX packet routing to use port/pci function on which the
+ * packet arrived on in addition to usual frame routing.
+ * This is helpful on bonding where both interfaces can have
+ * the same MAC address.
+ */
+ ql_write32(qdev, RST_FO, RST_FO_RR_MASK | RST_FO_RR_RCV_FUNC_CQ);
+
/* Start up the rx queues. */
for (i = 0; i < qdev->rx_ring_count; i++) {
status = ql_start_rx_ring(qdev, &qdev->rx_ring[i]);
@@ -3311,6 +3349,13 @@ static int ql_adapter_reset(struct ql_adapter *qdev)
end_jiffies = jiffies +
max((unsigned long)1, usecs_to_jiffies(30));
+
+ /* Stop management traffic. */
+ ql_mb_set_mgmnt_traffic_ctl(qdev, MB_SET_MPI_TFK_STOP);
+
+ /* Wait for the NIC and MGMNT FIFOs to empty. */
+ ql_wait_fifo_empty(qdev);
+
ql_write32(qdev, RST_FO, (RST_FO_FR << 16) | RST_FO_FR);
do {
@@ -3326,6 +3371,8 @@ static int ql_adapter_reset(struct ql_adapter *qdev)
status = -ETIMEDOUT;
}
+ /* Resume management traffic. */
+ ql_mb_set_mgmnt_traffic_ctl(qdev, MB_SET_MPI_TFK_RESUME);
return status;
}
@@ -3704,6 +3751,12 @@ static void ql_asic_reset_work(struct work_struct *work)
status = ql_adapter_up(qdev);
if (status)
goto error;
+
+ /* Restore rx mode. */
+ clear_bit(QL_ALLMULTI, &qdev->flags);
+ clear_bit(QL_PROMISCUOUS, &qdev->flags);
+ qlge_set_multicast_list(qdev->ndev);
+
rtnl_unlock();
return;
error:
@@ -3863,6 +3916,9 @@ static int __devinit ql_init_device(struct pci_dev *pdev,
goto err_out;
}
+ /* Set PCIe reset type for EEH to fundamental. */
+ pdev->needs_freset = 1;
+ pci_save_state(pdev);
qdev->reg_base =
ioremap_nocache(pci_resource_start(pdev, 1),
pci_resource_len(pdev, 1));
@@ -4017,6 +4073,33 @@ static void __devexit qlge_remove(struct pci_dev *pdev)
free_netdev(ndev);
}
+/* Clean up resources without touching hardware. */
+static void ql_eeh_close(struct net_device *ndev)
+{
+ int i;
+ struct ql_adapter *qdev = netdev_priv(ndev);
+
+ if (netif_carrier_ok(ndev)) {
+ netif_carrier_off(ndev);
+ netif_stop_queue(ndev);
+ }
+
+ if (test_bit(QL_ADAPTER_UP, &qdev->flags))
+ cancel_delayed_work_sync(&qdev->asic_reset_work);
+ cancel_delayed_work_sync(&qdev->mpi_reset_work);
+ cancel_delayed_work_sync(&qdev->mpi_work);
+ cancel_delayed_work_sync(&qdev->mpi_idc_work);
+ cancel_delayed_work_sync(&qdev->mpi_port_cfg_work);
+
+ for (i = 0; i < qdev->rss_ring_count; i++)
+ netif_napi_del(&qdev->rx_ring[i].napi);
+
+ clear_bit(QL_ADAPTER_UP, &qdev->flags);
+ ql_tx_ring_clean(qdev);
+ ql_free_rx_buffers(qdev);
+ ql_release_adapter_resources(qdev);
+}
+
/*
* This callback is called by the PCI subsystem whenever
* a PCI bus error is detected.
@@ -4025,17 +4108,21 @@ static pci_ers_result_t qlge_io_error_detected(struct pci_dev *pdev,
enum pci_channel_state state)
{
struct net_device *ndev = pci_get_drvdata(pdev);
- struct ql_adapter *qdev = netdev_priv(ndev);
- netif_device_detach(ndev);
-
- if (state == pci_channel_io_perm_failure)
+ switch (state) {
+ case pci_channel_io_normal:
+ return PCI_ERS_RESULT_CAN_RECOVER;
+ case pci_channel_io_frozen:
+ netif_device_detach(ndev);
+ if (netif_running(ndev))
+ ql_eeh_close(ndev);
+ pci_disable_device(pdev);
+ return PCI_ERS_RESULT_NEED_RESET;
+ case pci_channel_io_perm_failure:
+ dev_err(&pdev->dev,
+ "%s: pci_channel_io_perm_failure.\n", __func__);
return PCI_ERS_RESULT_DISCONNECT;
-
- if (netif_running(ndev))
- ql_adapter_down(qdev);
-
- pci_disable_device(pdev);
+ }
/* Request a slot reset. */
return PCI_ERS_RESULT_NEED_RESET;
@@ -4052,25 +4139,15 @@ static pci_ers_result_t qlge_io_slot_reset(struct pci_dev *pdev)
struct net_device *ndev = pci_get_drvdata(pdev);
struct ql_adapter *qdev = netdev_priv(ndev);
+ pdev->error_state = pci_channel_io_normal;
+
+ pci_restore_state(pdev);
if (pci_enable_device(pdev)) {
QPRINTK(qdev, IFUP, ERR,
"Cannot re-enable PCI device after reset.\n");
return PCI_ERS_RESULT_DISCONNECT;
}
-
pci_set_master(pdev);
-
- netif_carrier_off(ndev);
- ql_adapter_reset(qdev);
-
- /* Make sure the EEPROM is good */
- memcpy(ndev->perm_addr, ndev->dev_addr, ndev->addr_len);
-
- if (!is_valid_ether_addr(ndev->perm_addr)) {
- QPRINTK(qdev, IFUP, ERR, "After reset, invalid MAC address.\n");
- return PCI_ERS_RESULT_DISCONNECT;
- }
-
return PCI_ERS_RESULT_RECOVERED;
}
@@ -4078,17 +4155,21 @@ static void qlge_io_resume(struct pci_dev *pdev)
{
struct net_device *ndev = pci_get_drvdata(pdev);
struct ql_adapter *qdev = netdev_priv(ndev);
+ int err = 0;
- pci_set_master(pdev);
-
+ if (ql_adapter_reset(qdev))
+ QPRINTK(qdev, DRV, ERR, "reset FAILED!\n");
if (netif_running(ndev)) {
- if (ql_adapter_up(qdev)) {
+ err = qlge_open(ndev);
+ if (err) {
QPRINTK(qdev, IFUP, ERR,
"Device initialization failed after reset.\n");
return;
}
+ } else {
+ QPRINTK(qdev, IFUP, ERR,
+ "Device was not running prior to EEH.\n");
}
-
netif_device_attach(ndev);
}
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
index c2e43073047e..aec05f266107 100644
--- a/drivers/net/qlge/qlge_mpi.c
+++ b/drivers/net/qlge/qlge_mpi.c
@@ -470,7 +470,8 @@ end:
*/
static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp)
{
- int status, count;
+ int status;
+ unsigned long count;
/* Begin polled mode for MPI */
@@ -491,14 +492,14 @@ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp)
/* Wait for the command to complete. We loop
* here because some AEN might arrive while
* we're waiting for the mailbox command to
- * complete. If more than 5 arrive then we can
+ * complete. If more than 5 seconds expire we can
* assume something is wrong. */
- count = 5;
+ count = jiffies + HZ * MAILBOX_TIMEOUT;
do {
/* Wait for the interrupt to come in. */
status = ql_wait_mbx_cmd_cmplt(qdev);
if (status)
- goto end;
+ continue;
/* Process the event. If it's an AEN, it
* will be handled in-line or a worker
@@ -517,15 +518,15 @@ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp)
MB_CMD_STS_GOOD) ||
((mbcp->mbox_out[0] & 0x0000f000) ==
MB_CMD_STS_INTRMDT))
- break;
- } while (--count);
+ goto done;
+ } while (time_before(jiffies, count));
- if (!count) {
- QPRINTK(qdev, DRV, ERR,
- "Timed out waiting for mailbox complete.\n");
- status = -ETIMEDOUT;
- goto end;
- }
+ QPRINTK(qdev, DRV, ERR,
+ "Timed out waiting for mailbox complete.\n");
+ status = -ETIMEDOUT;
+ goto end;
+
+done:
/* Now we can clear the interrupt condition
* and look at our status.
@@ -768,6 +769,95 @@ static int ql_idc_wait(struct ql_adapter *qdev)
return status;
}
+int ql_mb_set_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 control)
+{
+ struct mbox_params mbc;
+ struct mbox_params *mbcp = &mbc;
+ int status;
+
+ memset(mbcp, 0, sizeof(struct mbox_params));
+
+ mbcp->in_count = 1;
+ mbcp->out_count = 2;
+
+ mbcp->mbox_in[0] = MB_CMD_SET_MGMNT_TFK_CTL;
+ mbcp->mbox_in[1] = control;
+
+ status = ql_mailbox_command(qdev, mbcp);
+ if (status)
+ return status;
+
+ if (mbcp->mbox_out[0] == MB_CMD_STS_GOOD)
+ return status;
+
+ if (mbcp->mbox_out[0] == MB_CMD_STS_INVLD_CMD) {
+ QPRINTK(qdev, DRV, ERR,
+ "Command not supported by firmware.\n");
+ status = -EINVAL;
+ } else if (mbcp->mbox_out[0] == MB_CMD_STS_ERR) {
+ /* This indicates that the firmware is
+ * already in the state we are trying to
+ * change it to.
+ */
+ QPRINTK(qdev, DRV, ERR,
+ "Command parameters make no change.\n");
+ }
+ return status;
+}
+
+/* Returns a negative error code or the mailbox command status. */
+static int ql_mb_get_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 *control)
+{
+ struct mbox_params mbc;
+ struct mbox_params *mbcp = &mbc;
+ int status;
+
+ memset(mbcp, 0, sizeof(struct mbox_params));
+ *control = 0;
+
+ mbcp->in_count = 1;
+ mbcp->out_count = 1;
+
+ mbcp->mbox_in[0] = MB_CMD_GET_MGMNT_TFK_CTL;
+
+ status = ql_mailbox_command(qdev, mbcp);
+ if (status)
+ return status;
+
+ if (mbcp->mbox_out[0] == MB_CMD_STS_GOOD) {
+ *control = mbcp->mbox_in[1];
+ return status;
+ }
+
+ if (mbcp->mbox_out[0] == MB_CMD_STS_INVLD_CMD) {
+ QPRINTK(qdev, DRV, ERR,
+ "Command not supported by firmware.\n");
+ status = -EINVAL;
+ } else if (mbcp->mbox_out[0] == MB_CMD_STS_ERR) {
+ QPRINTK(qdev, DRV, ERR,
+ "Failed to get MPI traffic control.\n");
+ status = -EIO;
+ }
+ return status;
+}
+
+int ql_wait_fifo_empty(struct ql_adapter *qdev)
+{
+ int count = 5;
+ u32 mgmnt_fifo_empty;
+ u32 nic_fifo_empty;
+
+ do {
+ nic_fifo_empty = ql_read32(qdev, STS) & STS_NFE;
+ ql_mb_get_mgmnt_traffic_ctl(qdev, &mgmnt_fifo_empty);
+ mgmnt_fifo_empty &= MB_GET_MPI_TFK_FIFO_EMPTY;
+ if (nic_fifo_empty && mgmnt_fifo_empty)
+ return 0;
+ msleep(100);
+ } while (count-- > 0);
+ return -ETIMEDOUT;
+}
+
/* API called in work thread context to set new TX/RX
* maximum frame size values to match MTU.
*/
@@ -876,6 +966,8 @@ void ql_mpi_work(struct work_struct *work)
int err = 0;
rtnl_lock();
+ /* Begin polled mode for MPI */
+ ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16));
while (ql_read32(qdev, STS) & STS_PI) {
memset(mbcp, 0, sizeof(struct mbox_params));
@@ -888,6 +980,8 @@ void ql_mpi_work(struct work_struct *work)
break;
}
+ /* End polled mode for MPI */
+ ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI);
rtnl_unlock();
ql_enable_completion_interrupt(qdev, 0);
}
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.