diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/net/sfc/qt202x_phy.c | 42 |
1 files changed, 24 insertions, 18 deletions
diff --git a/drivers/net/sfc/qt202x_phy.c b/drivers/net/sfc/qt202x_phy.c index e077bef08a50..68813d1d85f3 100644 --- a/drivers/net/sfc/qt202x_phy.c +++ b/drivers/net/sfc/qt202x_phy.c @@ -91,9 +91,10 @@ static int qt2025c_wait_heartbeat(struct efx_nic *efx) if (time_after(jiffies, timeout)) { /* Some cables have EEPROMs that conflict with the * PHY's on-board EEPROM so it cannot load firmware */ - EFX_ERR(efx, "If an SFP+ direct attach cable is" - " connected, please check that it complies" - " with the SFP+ specification\n"); + netif_err(efx, hw, efx->net_dev, + "If an SFP+ direct attach cable is" + " connected, please check that it complies" + " with the SFP+ specification\n"); return -ETIMEDOUT; } msleep(QT2025C_HEARTB_WAIT); @@ -145,7 +146,8 @@ static int qt2025c_wait_reset(struct efx_nic *efx) /* Bug 17689: occasionally heartbeat starts but firmware status * code never progresses beyond 0x00. Try again, once, after * restarting execution of the firmware image. */ - EFX_LOG(efx, "bashing QT2025C microcontroller\n"); + netif_dbg(efx, hw, efx->net_dev, + "bashing QT2025C microcontroller\n"); qt2025c_restart_firmware(efx); rc = qt2025c_wait_heartbeat(efx); if (rc != 0) @@ -165,11 +167,12 @@ static void qt2025c_firmware_id(struct efx_nic *efx) for (i = 0; i < sizeof(firmware_id); i++) firmware_id[i] = efx_mdio_read(efx, MDIO_MMD_PCS, PCS_FW_PRODUCT_CODE_1 + i); - EFX_INFO(efx, "QT2025C firmware %xr%d v%d.%d.%d.%d [20%02d-%02d-%02d]\n", - (firmware_id[0] << 8) | firmware_id[1], firmware_id[2], - firmware_id[3] >> 4, firmware_id[3] & 0xf, - firmware_id[4], firmware_id[5], - firmware_id[6], firmware_id[7], firmware_id[8]); + netif_info(efx, probe, efx->net_dev, + "QT2025C firmware %xr%d v%d.%d.%d.%d [20%02d-%02d-%02d]\n", + (firmware_id[0] << 8) | firmware_id[1], firmware_id[2], + firmware_id[3] >> 4, firmware_id[3] & 0xf, + firmware_id[4], firmware_id[5], + firmware_id[6], firmware_id[7], firmware_id[8]); phy_data->firmware_ver = ((firmware_id[3] & 0xf0) << 20) | ((firmware_id[3] & 0x0f) << 16) | (firmware_id[4] << 8) | firmware_id[5]; @@ -198,7 +201,7 @@ static void qt2025c_bug17190_workaround(struct efx_nic *efx) } if (time_after_eq(jiffies, phy_data->bug17190_timer)) { - EFX_LOG(efx, "bashing QT2025C PMA/PMD\n"); + netif_dbg(efx, hw, efx->net_dev, "bashing QT2025C PMA/PMD\n"); efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_CTRL1, MDIO_PMA_CTRL1_LOOPBACK, true); msleep(100); @@ -231,7 +234,8 @@ static int qt2025c_select_phy_mode(struct efx_nic *efx) reg = efx_mdio_read(efx, 1, 0xc319); if ((reg & 0x0038) == phy_op_mode) return 0; - EFX_LOG(efx, "Switching PHY to mode 0x%04x\n", phy_op_mode); + netif_dbg(efx, hw, efx->net_dev, "Switching PHY to mode 0x%04x\n", + phy_op_mode); /* This sequence replicates the register writes configured in the boot * EEPROM (including the differences between board revisions), except @@ -287,8 +291,9 @@ static int qt2025c_select_phy_mode(struct efx_nic *efx) /* Wait for the microcontroller to be ready again */ rc = qt2025c_wait_reset(efx); if (rc < 0) { - EFX_ERR(efx, "PHY microcontroller reset during mode switch " - "timed out\n"); + netif_err(efx, hw, efx->net_dev, + "PHY microcontroller reset during mode switch " + "timed out\n"); return rc; } @@ -324,7 +329,7 @@ static int qt202x_reset_phy(struct efx_nic *efx) return 0; fail: - EFX_ERR(efx, "PHY reset timed out\n"); + netif_err(efx, hw, efx->net_dev, "PHY reset timed out\n"); return rc; } @@ -353,14 +358,15 @@ static int qt202x_phy_init(struct efx_nic *efx) rc = qt202x_reset_phy(efx); if (rc) { - EFX_ERR(efx, "PHY init failed\n"); + netif_err(efx, probe, efx->net_dev, "PHY init failed\n"); return rc; } devid = efx_mdio_read_id(efx, MDIO_MMD_PHYXS); - EFX_INFO(efx, "PHY ID reg %x (OUI %06x model %02x revision %x)\n", - devid, efx_mdio_id_oui(devid), efx_mdio_id_model(devid), - efx_mdio_id_rev(devid)); + netif_info(efx, probe, efx->net_dev, + "PHY ID reg %x (OUI %06x model %02x revision %x)\n", + devid, efx_mdio_id_oui(devid), efx_mdio_id_model(devid), + efx_mdio_id_rev(devid)); if (efx->phy_type == PHY_TYPE_QT2025C) qt2025c_firmware_id(efx); |