diff options
Diffstat (limited to 'drivers/net/usb/asix_devices.c')
| -rw-r--r-- | drivers/net/usb/asix_devices.c | 450 |
1 files changed, 361 insertions, 89 deletions
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c index 5cabefc23494..cce24950a0ab 100644 --- a/drivers/net/usb/asix_devices.c +++ b/drivers/net/usb/asix_devices.c @@ -35,6 +35,15 @@ #define PHY_MODE_RTL8211CL 0x000C +#define AX88772A_PHY14H 0x14 +#define AX88772A_PHY14H_DEFAULT 0x442C + +#define AX88772A_PHY15H 0x15 +#define AX88772A_PHY15H_DEFAULT 0x03C8 + +#define AX88772A_PHY16H 0x16 +#define AX88772A_PHY16H_DEFAULT 0x4044 + struct ax88172_int_data { __le16 res1; u8 link; @@ -79,6 +88,8 @@ static u32 asix_get_phyid(struct usbnet *dev) /* Poll for the rare case the FW or phy isn't ready yet. */ for (i = 0; i < 100; i++) { phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1); + if (phy_reg < 0) + return 0; if (phy_reg != 0 && phy_reg != 0xFFFF) break; mdelay(1); @@ -184,7 +195,7 @@ static int ax88172_link_reset(struct usbnet *dev) netdev_dbg(dev->net, "ax88172_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n", ethtool_cmd_speed(&ecmd), ecmd.duplex, mode); - asix_write_medium_mode(dev, mode); + asix_write_medium_mode(dev, mode, 0); return 0; } @@ -201,6 +212,28 @@ static const struct net_device_ops ax88172_netdev_ops = { .ndo_set_rx_mode = ax88172_set_multicast, }; +static void asix_phy_reset(struct usbnet *dev, unsigned int reset_bits) +{ + unsigned int timeout = 5000; + + asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, reset_bits); + + /* give phy_id a chance to process reset */ + udelay(500); + + /* See IEEE 802.3 "22.2.4.1.1 Reset": 500ms max */ + while (timeout--) { + if (asix_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR) + & BMCR_RESET) + udelay(100); + else + return; + } + + netdev_err(dev->net, "BMCR_RESET timeout on phy_id %d\n", + dev->mii.phy_id); +} + static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf) { int ret = 0; @@ -213,18 +246,19 @@ static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf) /* Toggle the GPIOs in a manufacturer/model specific way */ for (i = 2; i >= 0; i--) { ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, - (gpio_bits >> (i * 8)) & 0xff, 0, 0, NULL); + (gpio_bits >> (i * 8)) & 0xff, 0, 0, NULL, 0); if (ret < 0) goto out; msleep(5); } - ret = asix_write_rx_ctl(dev, 0x80); + ret = asix_write_rx_ctl(dev, 0x80, 0); if (ret < 0) goto out; /* Get the MAC address */ - ret = asix_read_cmd(dev, AX88172_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf); + ret = asix_read_cmd(dev, AX88172_CMD_READ_NODE_ID, + 0, 0, ETH_ALEN, buf, 0); if (ret < 0) { netdev_dbg(dev->net, "read AX_CMD_READ_NODE_ID failed: %d\n", ret); @@ -246,7 +280,7 @@ static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf) dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */ dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */ - asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); + asix_phy_reset(dev, BMCR_RESET); asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP); mii_nway_restart(&dev->mii); @@ -290,7 +324,7 @@ static int ax88772_link_reset(struct usbnet *dev) netdev_dbg(dev->net, "ax88772_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n", ethtool_cmd_speed(&ecmd), ecmd.duplex, mode); - asix_write_medium_mode(dev, mode); + asix_write_medium_mode(dev, mode, 0); return 0; } @@ -298,78 +332,218 @@ static int ax88772_link_reset(struct usbnet *dev) static int ax88772_reset(struct usbnet *dev) { struct asix_data *data = (struct asix_data *)&dev->data; + int ret; + + /* Rewrite MAC address */ + ether_addr_copy(data->mac_addr, dev->net->dev_addr); + ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, + ETH_ALEN, data->mac_addr, 0); + if (ret < 0) + goto out; + + /* Set RX_CTL to default values with 2k buffer, and enable cactus */ + ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, 0); + if (ret < 0) + goto out; + + asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, 0); + if (ret < 0) + goto out; + + return 0; + +out: + return ret; +} + +static int ax88772_hw_reset(struct usbnet *dev, int in_pm) +{ + struct asix_data *data = (struct asix_data *)&dev->data; int ret, embd_phy; u16 rx_ctl; - ret = asix_write_gpio(dev, - AX_GPIO_RSE | AX_GPIO_GPO_2 | AX_GPIO_GPO2EN, 5); + ret = asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_2 | + AX_GPIO_GPO2EN, 5, in_pm); if (ret < 0) goto out; - embd_phy = ((asix_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0); + embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0); - ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL); + ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, + 0, 0, NULL, in_pm); if (ret < 0) { netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret); goto out; } - ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL); - if (ret < 0) - goto out; + if (embd_phy) { + ret = asix_sw_reset(dev, AX_SWRESET_IPPD, in_pm); + if (ret < 0) + goto out; - msleep(150); + usleep_range(10000, 11000); - ret = asix_sw_reset(dev, AX_SWRESET_CLEAR); - if (ret < 0) - goto out; + ret = asix_sw_reset(dev, AX_SWRESET_CLEAR, in_pm); + if (ret < 0) + goto out; - msleep(150); + msleep(60); - if (embd_phy) { - ret = asix_sw_reset(dev, AX_SWRESET_IPRL); + ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL, + in_pm); if (ret < 0) goto out; } else { - ret = asix_sw_reset(dev, AX_SWRESET_PRTE); + ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL, + in_pm); if (ret < 0) goto out; } msleep(150); - rx_ctl = asix_read_rx_ctl(dev); - netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl); - ret = asix_write_rx_ctl(dev, 0x0000); + + if (in_pm && (!asix_mdio_read_nopm(dev->net, dev->mii.phy_id, + MII_PHYSID1))){ + ret = -EIO; + goto out; + } + + ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm); if (ret < 0) goto out; - rx_ctl = asix_read_rx_ctl(dev); - netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl); + ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, in_pm); + if (ret < 0) + goto out; + + ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0, + AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT, + AX88772_IPG2_DEFAULT, 0, NULL, in_pm); + if (ret < 0) { + netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret); + goto out; + } + + /* Rewrite MAC address */ + ether_addr_copy(data->mac_addr, dev->net->dev_addr); + ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, + ETH_ALEN, data->mac_addr, in_pm); + if (ret < 0) + goto out; - ret = asix_sw_reset(dev, AX_SWRESET_PRL); + /* Set RX_CTL to default values with 2k buffer, and enable cactus */ + ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm); if (ret < 0) goto out; - msleep(150); + rx_ctl = asix_read_rx_ctl(dev, in_pm); + netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n", + rx_ctl); - ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL); + rx_ctl = asix_read_medium_status(dev, in_pm); + netdev_dbg(dev->net, + "Medium Status is 0x%04x after all initializations\n", + rx_ctl); + + return 0; + +out: + return ret; +} + +static int ax88772a_hw_reset(struct usbnet *dev, int in_pm) +{ + struct asix_data *data = (struct asix_data *)&dev->data; + int ret, embd_phy; + u16 rx_ctl, phy14h, phy15h, phy16h; + u8 chipcode = 0; + + ret = asix_write_gpio(dev, AX_GPIO_RSE, 5, in_pm); if (ret < 0) goto out; - msleep(150); + embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0); - asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); - asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, - ADVERTISE_ALL | ADVERTISE_CSMA); - mii_nway_restart(&dev->mii); + ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy | + AX_PHYSEL_SSEN, 0, 0, NULL, in_pm); + if (ret < 0) { + netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret); + goto out; + } + usleep_range(10000, 11000); + + ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_IPRL, in_pm); + if (ret < 0) + goto out; + + usleep_range(10000, 11000); + + ret = asix_sw_reset(dev, AX_SWRESET_IPRL, in_pm); + if (ret < 0) + goto out; + + msleep(160); + + ret = asix_sw_reset(dev, AX_SWRESET_CLEAR, in_pm); + if (ret < 0) + goto out; - ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT); + ret = asix_sw_reset(dev, AX_SWRESET_IPRL, in_pm); if (ret < 0) goto out; + msleep(200); + + if (in_pm && (!asix_mdio_read_nopm(dev->net, dev->mii.phy_id, + MII_PHYSID1))) { + ret = -1; + goto out; + } + + ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, + 0, 1, &chipcode, in_pm); + if (ret < 0) + goto out; + + if ((chipcode & AX_CHIPCODE_MASK) == AX_AX88772B_CHIPCODE) { + ret = asix_write_cmd(dev, AX_QCTCTRL, 0x8000, 0x8001, + 0, NULL, in_pm); + if (ret < 0) { + netdev_dbg(dev->net, "Write BQ setting failed: %d\n", + ret); + goto out; + } + } else if ((chipcode & AX_CHIPCODE_MASK) == AX_AX88772A_CHIPCODE) { + /* Check if the PHY registers have default settings */ + phy14h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id, + AX88772A_PHY14H); + phy15h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id, + AX88772A_PHY15H); + phy16h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id, + AX88772A_PHY16H); + + netdev_dbg(dev->net, + "772a_hw_reset: MR20=0x%x MR21=0x%x MR22=0x%x\n", + phy14h, phy15h, phy16h); + + /* Restore PHY registers default setting if not */ + if (phy14h != AX88772A_PHY14H_DEFAULT) + asix_mdio_write_nopm(dev->net, dev->mii.phy_id, + AX88772A_PHY14H, + AX88772A_PHY14H_DEFAULT); + if (phy15h != AX88772A_PHY15H_DEFAULT) + asix_mdio_write_nopm(dev->net, dev->mii.phy_id, + AX88772A_PHY15H, + AX88772A_PHY15H_DEFAULT); + if (phy16h != AX88772A_PHY16H_DEFAULT) + asix_mdio_write_nopm(dev->net, dev->mii.phy_id, + AX88772A_PHY16H, + AX88772A_PHY16H_DEFAULT); + } + ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0, AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT, - AX88772_IPG2_DEFAULT, 0, NULL); + AX88772_IPG2_DEFAULT, 0, NULL, in_pm); if (ret < 0) { netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret); goto out; @@ -378,20 +552,29 @@ static int ax88772_reset(struct usbnet *dev) /* Rewrite MAC address */ memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN); ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, - data->mac_addr); + data->mac_addr, in_pm); if (ret < 0) goto out; /* Set RX_CTL to default values with 2k buffer, and enable cactus */ - ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL); + ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm); if (ret < 0) goto out; - rx_ctl = asix_read_rx_ctl(dev); + ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, in_pm); + if (ret < 0) + return ret; + + /* Set RX_CTL to default values with 2k buffer, and enable cactus */ + ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm); + if (ret < 0) + goto out; + + rx_ctl = asix_read_rx_ctl(dev, in_pm); netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n", rx_ctl); - rx_ctl = asix_read_medium_status(dev); + rx_ctl = asix_read_medium_status(dev, in_pm); netdev_dbg(dev->net, "Medium Status is 0x%04x after all initializations\n", rx_ctl); @@ -400,7 +583,6 @@ static int ax88772_reset(struct usbnet *dev) out: return ret; - } static const struct net_device_ops ax88772_netdev_ops = { @@ -415,11 +597,97 @@ static const struct net_device_ops ax88772_netdev_ops = { .ndo_set_rx_mode = asix_set_multicast, }; +static void ax88772_suspend(struct usbnet *dev) +{ + struct asix_common_private *priv = dev->driver_priv; + u16 medium; + + /* Stop MAC operation */ + medium = asix_read_medium_status(dev, 0); + medium &= ~AX_MEDIUM_RE; + asix_write_medium_mode(dev, medium, 0); + + netdev_dbg(dev->net, "ax88772_suspend: medium=0x%04x\n", + asix_read_medium_status(dev, 0)); + + /* Preserve BMCR for restoring */ + priv->presvd_phy_bmcr = + asix_mdio_read_nopm(dev->net, dev->mii.phy_id, MII_BMCR); + + /* Preserve ANAR for restoring */ + priv->presvd_phy_advertise = + asix_mdio_read_nopm(dev->net, dev->mii.phy_id, MII_ADVERTISE); +} + +static int asix_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct usbnet *dev = usb_get_intfdata(intf); + struct asix_common_private *priv = dev->driver_priv; + + if (priv->suspend) + priv->suspend(dev); + + return usbnet_suspend(intf, message); +} + +static void ax88772_restore_phy(struct usbnet *dev) +{ + struct asix_common_private *priv = dev->driver_priv; + + if (priv->presvd_phy_advertise) { + /* Restore Advertisement control reg */ + asix_mdio_write_nopm(dev->net, dev->mii.phy_id, MII_ADVERTISE, + priv->presvd_phy_advertise); + + /* Restore BMCR */ + asix_mdio_write_nopm(dev->net, dev->mii.phy_id, MII_BMCR, + priv->presvd_phy_bmcr); + + mii_nway_restart(&dev->mii); + priv->presvd_phy_advertise = 0; + priv->presvd_phy_bmcr = 0; + } +} + +static void ax88772_resume(struct usbnet *dev) +{ + int i; + + for (i = 0; i < 3; i++) + if (!ax88772_hw_reset(dev, 1)) + break; + ax88772_restore_phy(dev); +} + +static void ax88772a_resume(struct usbnet *dev) +{ + int i; + + for (i = 0; i < 3; i++) { + if (!ax88772a_hw_reset(dev, 1)) + break; + } + + ax88772_restore_phy(dev); +} + +static int asix_resume(struct usb_interface *intf) +{ + struct usbnet *dev = usb_get_intfdata(intf); + struct asix_common_private *priv = dev->driver_priv; + + if (priv->resume) + priv->resume(dev); + + return usbnet_resume(intf); +} + static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) { - int ret, embd_phy, i; - u8 buf[ETH_ALEN]; + int ret, i; + u8 buf[ETH_ALEN], chipcode = 0; u32 phyid; + struct asix_common_private *priv; usbnet_get_endpoints(dev,intf); @@ -427,13 +695,13 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) if (dev->driver_info->data & FLAG_EEPROM_MAC) { for (i = 0; i < (ETH_ALEN >> 1); i++) { ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x04 + i, - 0, 2, buf + i * 2); + 0, 2, buf + i * 2, 0); if (ret < 0) break; } } else { ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, - 0, 0, ETH_ALEN, buf); + 0, 0, ETH_ALEN, buf, 0); } if (ret < 0) { @@ -456,16 +724,11 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */ dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */ - embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0); - - /* Reset the PHY to normal operation mode */ - ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL); - if (ret < 0) { - netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret); - return ret; - } + asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &chipcode, 0); + chipcode &= AX_CHIPCODE_MASK; - ax88772_reset(dev); + (chipcode == AX_AX88772_CHIPCODE) ? ax88772_hw_reset(dev, 0) : + ax88772a_hw_reset(dev, 0); /* Read PHYID register *AFTER* the PHY was reset properly */ phyid = asix_get_phyid(dev); @@ -482,6 +745,18 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) if (!dev->driver_priv) return -ENOMEM; + priv = dev->driver_priv; + + priv->presvd_phy_bmcr = 0; + priv->presvd_phy_advertise = 0; + if (chipcode == AX_AX88772_CHIPCODE) { + priv->resume = ax88772_resume; + priv->suspend = ax88772_suspend; + } else { + priv->resume = ax88772a_resume; + priv->suspend = ax88772_suspend; + } + return 0; } @@ -593,12 +868,12 @@ static int ax88178_reset(struct usbnet *dev) int gpio0 = 0; u32 phyid; - asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status); + asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status, 0); netdev_dbg(dev->net, "GPIO Status: 0x%04x\n", status); - asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL); - asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom); - asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL); + asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL, 0); + asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom, 0); + asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL, 0); netdev_dbg(dev->net, "EEPROM index 0x17 is 0x%04x\n", eeprom); @@ -614,15 +889,16 @@ static int ax88178_reset(struct usbnet *dev) netdev_dbg(dev->net, "GPIO0: %d, PhyMode: %d\n", gpio0, data->phymode); /* Power up external GigaPHY through AX88178 GPIO pin */ - asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 | AX_GPIO_GPO1EN, 40); + asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 | + AX_GPIO_GPO1EN, 40, 0); if ((le16_to_cpu(eeprom) >> 8) != 1) { - asix_write_gpio(dev, 0x003c, 30); - asix_write_gpio(dev, 0x001c, 300); - asix_write_gpio(dev, 0x003c, 30); + asix_write_gpio(dev, 0x003c, 30, 0); + asix_write_gpio(dev, 0x001c, 300, 0); + asix_write_gpio(dev, 0x003c, 30, 0); } else { netdev_dbg(dev->net, "gpio phymode == 1 path\n"); - asix_write_gpio(dev, AX_GPIO_GPO1EN, 30); - asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30); + asix_write_gpio(dev, AX_GPIO_GPO1EN, 30, 0); + asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30, 0); } /* Read PHYID register *AFTER* powering up PHY */ @@ -630,15 +906,15 @@ static int ax88178_reset(struct usbnet *dev) netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid); /* Set AX88178 to enable MII/GMII/RGMII interface for external PHY */ - asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL); + asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL, 0); - asix_sw_reset(dev, 0); + asix_sw_reset(dev, 0, 0); msleep(150); - asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD); + asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD, 0); msleep(150); - asix_write_rx_ctl(dev, 0); + asix_write_rx_ctl(dev, 0, 0); if (data->phymode == PHY_MODE_MARVELL) { marvell_phy_init(dev); @@ -646,27 +922,23 @@ static int ax88178_reset(struct usbnet *dev) } else if (data->phymode == PHY_MODE_RTL8211CL) rtl8211cl_phy_init(dev); - asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, - BMCR_RESET | BMCR_ANENABLE); + asix_phy_reset(dev, BMCR_RESET | BMCR_ANENABLE); asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP); asix_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000, ADVERTISE_1000FULL); + asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT, 0); mii_nway_restart(&dev->mii); - ret = asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT); - if (ret < 0) - return ret; - /* Rewrite MAC address */ memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN); ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, - data->mac_addr); + data->mac_addr, 0); if (ret < 0) return ret; - ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL); + ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, 0); if (ret < 0) return ret; @@ -704,7 +976,7 @@ static int ax88178_link_reset(struct usbnet *dev) netdev_dbg(dev->net, "ax88178_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n", speed, ecmd.duplex, mode); - asix_write_medium_mode(dev, mode); + asix_write_medium_mode(dev, mode, 0); if (data->phymode == PHY_MODE_MARVELL && data->ledmode) marvell_led_status(dev, speed); @@ -733,15 +1005,15 @@ static void ax88178_set_mfb(struct usbnet *dev) mfb = AX_RX_CTL_MFB_16384; } - rxctl = asix_read_rx_ctl(dev); - asix_write_rx_ctl(dev, (rxctl & ~AX_RX_CTL_MFB_16384) | mfb); + rxctl = asix_read_rx_ctl(dev, 0); + asix_write_rx_ctl(dev, (rxctl & ~AX_RX_CTL_MFB_16384) | mfb, 0); - medium = asix_read_medium_status(dev); + medium = asix_read_medium_status(dev, 0); if (dev->net->mtu > 1500) medium |= AX_MEDIUM_JFE; else medium &= ~AX_MEDIUM_JFE; - asix_write_medium_mode(dev, medium); + asix_write_medium_mode(dev, medium, 0); if (dev->rx_urb_size > old_rx_urb_size) usbnet_unlink_rx_urbs(dev); @@ -790,7 +1062,7 @@ static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf) usbnet_get_endpoints(dev,intf); /* Get the MAC address */ - ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf); + ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf, 0); if (ret < 0) { netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret); return ret; @@ -811,10 +1083,10 @@ static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf) dev->net->ethtool_ops = &ax88178_ethtool_ops; /* Blink LEDS so users know driver saw dongle */ - asix_sw_reset(dev, 0); + asix_sw_reset(dev, 0, 0); msleep(150); - asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD); + asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD, 0); msleep(150); /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */ @@ -877,7 +1149,7 @@ static const struct driver_info ax88772_info = { .unbind = ax88772_unbind, .status = asix_status, .link_reset = ax88772_link_reset, - .reset = ax88772_link_reset, + .reset = ax88772_reset, .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET, .rx_fixup = asix_rx_fixup_common, .tx_fixup = asix_tx_fixup, @@ -1005,7 +1277,7 @@ static const struct usb_device_id products [] = { }, { // Lenovo U2L100P 10/100 USB_DEVICE (0x17ef, 0x7203), - .driver_info = (unsigned long) &ax88772_info, + .driver_info = (unsigned long)&ax88772b_info, }, { // ASIX AX88772B 10/100 USB_DEVICE (0x0b95, 0x772b), @@ -1073,7 +1345,7 @@ static const struct usb_device_id products [] = { }, { // Asus USB Ethernet Adapter USB_DEVICE (0x0b95, 0x7e2b), - .driver_info = (unsigned long) &ax88772_info, + .driver_info = (unsigned long)&ax88772b_info, }, { /* ASIX 88172a demo board */ USB_DEVICE(0x0b95, 0x172a), @@ -1095,8 +1367,8 @@ static struct usb_driver asix_driver = { .name = DRIVER_NAME, .id_table = products, .probe = usbnet_probe, - .suspend = usbnet_suspend, - .resume = usbnet_resume, + .suspend = asix_suspend, + .resume = asix_resume, .disconnect = usbnet_disconnect, .supports_autosuspend = 1, .disable_hub_initiated_lpm = 1, |