aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath/ath9k/main.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath/ath9k/main.c')
-rw-r--r--drivers/net/wireless/ath/ath9k/main.c593
1 files changed, 327 insertions, 266 deletions
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 9098aaad97a9..7910165cf0e6 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -111,24 +111,29 @@ void ath9k_ps_wakeup(struct ath_softc *sc)
void ath9k_ps_restore(struct ath_softc *sc)
{
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+ enum ath9k_power_mode mode;
unsigned long flags;
spin_lock_irqsave(&sc->sc_pm_lock, flags);
if (--sc->ps_usecount != 0)
goto unlock;
- spin_lock(&common->cc_lock);
- ath_hw_cycle_counters_update(common);
- spin_unlock(&common->cc_lock);
-
if (sc->ps_idle)
- ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP);
+ mode = ATH9K_PM_FULL_SLEEP;
else if (sc->ps_enabled &&
!(sc->ps_flags & (PS_WAIT_FOR_BEACON |
PS_WAIT_FOR_CAB |
PS_WAIT_FOR_PSPOLL_DATA |
PS_WAIT_FOR_TX_ACK)))
- ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_NETWORK_SLEEP);
+ mode = ATH9K_PM_NETWORK_SLEEP;
+ else
+ goto unlock;
+
+ spin_lock(&common->cc_lock);
+ ath_hw_cycle_counters_update(common);
+ spin_unlock(&common->cc_lock);
+
+ ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_NETWORK_SLEEP);
unlock:
spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
@@ -163,7 +168,7 @@ static void ath_update_survey_nf(struct ath_softc *sc, int channel)
if (chan->noisefloor) {
survey->filled |= SURVEY_INFO_NOISE_DBM;
- survey->noise = chan->noisefloor;
+ survey->noise = ath9k_hw_getchan_noise(ah, chan);
}
}
@@ -212,104 +217,168 @@ static int ath_update_survey_stats(struct ath_softc *sc)
return ret;
}
-/*
- * Set/change channels. If the channel is really being changed, it's done
- * by reseting the chip. To accomplish this we must first cleanup any pending
- * DMA, then restart stuff.
-*/
-static int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
- struct ath9k_channel *hchan)
+static void __ath_cancel_work(struct ath_softc *sc)
{
- struct ath_hw *ah = sc->sc_ah;
- struct ath_common *common = ath9k_hw_common(ah);
- struct ieee80211_conf *conf = &common->hw->conf;
- bool fastcc = true, stopped;
- struct ieee80211_channel *channel = hw->conf.channel;
- struct ath9k_hw_cal_data *caldata = NULL;
- int r;
-
- if (sc->sc_flags & SC_OP_INVALID)
- return -EIO;
-
- sc->hw_busy_count = 0;
-
- del_timer_sync(&common->ani.timer);
cancel_work_sync(&sc->paprd_work);
cancel_work_sync(&sc->hw_check_work);
cancel_delayed_work_sync(&sc->tx_complete_work);
cancel_delayed_work_sync(&sc->hw_pll_work);
+}
- ath9k_ps_wakeup(sc);
+static void ath_cancel_work(struct ath_softc *sc)
+{
+ __ath_cancel_work(sc);
+ cancel_work_sync(&sc->hw_reset_work);
+}
- spin_lock_bh(&sc->sc_pcu_lock);
+static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx, bool flush)
+{
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
+ bool ret;
- /*
- * This is only performed if the channel settings have
- * actually changed.
- *
- * To switch channels clear any pending DMA operations;
- * wait long enough for the RX fifo to drain, reset the
- * hardware at the new frequency, and then re-enable
- * the relevant bits of the h/w.
- */
- ath9k_hw_disable_interrupts(ah);
- stopped = ath_drain_all_txq(sc, false);
+ ieee80211_stop_queues(sc->hw);
- if (!ath_stoprecv(sc))
- stopped = false;
+ sc->hw_busy_count = 0;
+ del_timer_sync(&common->ani.timer);
- if (!ath9k_hw_check_alive(ah))
- stopped = false;
+ ath9k_debug_samp_bb_mac(sc);
+ ath9k_hw_disable_interrupts(ah);
- /* XXX: do not flush receive queue here. We don't want
- * to flush data frames already in queue because of
- * changing channel. */
+ ret = ath_drain_all_txq(sc, retry_tx);
- if (!stopped || !(sc->sc_flags & SC_OP_OFFCHANNEL))
- fastcc = false;
+ if (!ath_stoprecv(sc))
+ ret = false;
- if (!(sc->sc_flags & SC_OP_OFFCHANNEL))
- caldata = &sc->caldata;
+ if (!flush) {
+ if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
+ ath_rx_tasklet(sc, 1, true);
+ ath_rx_tasklet(sc, 1, false);
+ } else {
+ ath_flushrecv(sc);
+ }
- ath_dbg(common, ATH_DBG_CONFIG,
- "(%u MHz) -> (%u MHz), conf_is_ht40: %d fastcc: %d\n",
- sc->sc_ah->curchan->channel,
- channel->center_freq, conf_is_ht40(conf),
- fastcc);
+ return ret;
+}
- r = ath9k_hw_reset(ah, hchan, caldata, fastcc);
- if (r) {
- ath_err(common,
- "Unable to reset channel (%u MHz), reset status %d\n",
- channel->center_freq, r);
- goto ps_restore;
- }
+static bool ath_complete_reset(struct ath_softc *sc, bool start)
+{
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
if (ath_startrecv(sc) != 0) {
ath_err(common, "Unable to restart recv logic\n");
- r = -EIO;
- goto ps_restore;
+ return false;
}
ath9k_cmn_update_txpow(ah, sc->curtxpow,
sc->config.txpowlimit, &sc->curtxpow);
ath9k_hw_set_interrupts(ah, ah->imask);
+ ath9k_hw_enable_interrupts(ah);
- if (!(sc->sc_flags & (SC_OP_OFFCHANNEL))) {
+ if (!(sc->sc_flags & (SC_OP_OFFCHANNEL)) && start) {
if (sc->sc_flags & SC_OP_BEACONS)
ath_set_beacon(sc);
+
ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
ieee80211_queue_delayed_work(sc->hw, &sc->hw_pll_work, HZ/2);
if (!common->disable_ani)
ath_start_ani(common);
}
- ps_restore:
- ieee80211_wake_queues(hw);
+ if (ath9k_hw_ops(ah)->antdiv_comb_conf_get && sc->ant_rx != 3) {
+ struct ath_hw_antcomb_conf div_ant_conf;
+ u8 lna_conf;
+
+ ath9k_hw_antdiv_comb_conf_get(ah, &div_ant_conf);
+
+ if (sc->ant_rx == 1)
+ lna_conf = ATH_ANT_DIV_COMB_LNA1;
+ else
+ lna_conf = ATH_ANT_DIV_COMB_LNA2;
+ div_ant_conf.main_lna_conf = lna_conf;
+ div_ant_conf.alt_lna_conf = lna_conf;
+ ath9k_hw_antdiv_comb_conf_set(ah, &div_ant_conf);
+ }
+
+ ieee80211_wake_queues(sc->hw);
+
+ return true;
+}
+
+static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan,
+ bool retry_tx)
+{
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_cal_data *caldata = NULL;
+ bool fastcc = true;
+ bool flush = false;
+ int r;
+
+ __ath_cancel_work(sc);
+
+ spin_lock_bh(&sc->sc_pcu_lock);
+
+ if (!(sc->sc_flags & SC_OP_OFFCHANNEL)) {
+ fastcc = false;
+ caldata = &sc->caldata;
+ }
+
+ if (!hchan) {
+ fastcc = false;
+ flush = true;
+ hchan = ah->curchan;
+ }
+
+ if (fastcc && !ath9k_hw_check_alive(ah))
+ fastcc = false;
+
+ if (!ath_prepare_reset(sc, retry_tx, flush))
+ fastcc = false;
+
+ ath_dbg(common, ATH_DBG_CONFIG,
+ "Reset to %u MHz, HT40: %d fastcc: %d\n",
+ hchan->channel, !!(hchan->channelFlags & (CHANNEL_HT40MINUS |
+ CHANNEL_HT40PLUS)),
+ fastcc);
+
+ r = ath9k_hw_reset(ah, hchan, caldata, fastcc);
+ if (r) {
+ ath_err(common,
+ "Unable to reset channel, reset status %d\n", r);
+ goto out;
+ }
+
+ if (!ath_complete_reset(sc, true))
+ r = -EIO;
+
+out:
spin_unlock_bh(&sc->sc_pcu_lock);
+ return r;
+}
+
+
+/*
+ * Set/change channels. If the channel is really being changed, it's done
+ * by reseting the chip. To accomplish this we must first cleanup any pending
+ * DMA, then restart stuff.
+*/
+static int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
+ struct ath9k_channel *hchan)
+{
+ int r;
+
+ if (sc->sc_flags & SC_OP_INVALID)
+ return -EIO;
+
+ ath9k_ps_wakeup(sc);
+
+ r = ath_reset_internal(sc, hchan, false);
ath9k_ps_restore(sc);
+
return r;
}
@@ -317,7 +386,6 @@ static void ath_paprd_activate(struct ath_softc *sc)
{
struct ath_hw *ah = sc->sc_ah;
struct ath9k_hw_cal_data *caldata = ah->caldata;
- struct ath_common *common = ath9k_hw_common(ah);
int chain;
if (!caldata || !caldata->paprd_done)
@@ -326,7 +394,7 @@ static void ath_paprd_activate(struct ath_softc *sc)
ath9k_ps_wakeup(sc);
ar9003_paprd_enable(ah, false);
for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) {
- if (!(common->tx_chainmask & BIT(chain)))
+ if (!(ah->txchainmask & BIT(chain)))
continue;
ar9003_paprd_populate_single_table(ah, caldata, chain);
@@ -413,7 +481,7 @@ void ath_paprd_calibrate(struct work_struct *work)
memcpy(hdr->addr3, hw->wiphy->perm_addr, ETH_ALEN);
for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) {
- if (!(common->tx_chainmask & BIT(chain)))
+ if (!(ah->txchainmask & BIT(chain)))
continue;
chain_ok = 0;
@@ -534,7 +602,7 @@ void ath_ani_calibrate(unsigned long data)
if (longcal || shortcal) {
common->ani.caldone =
ath9k_hw_calibrate(ah, ah->curchan,
- common->rx_chainmask, longcal);
+ ah->rxchainmask, longcal);
}
ath9k_ps_restore(sc);
@@ -545,6 +613,7 @@ set_timer:
* The interval must be the shortest necessary to satisfy ANI,
* short calibration and long calibration.
*/
+ ath9k_debug_samp_bb_mac(sc);
cal_interval = ATH_LONG_CALINTERVAL;
if (sc->sc_ah->config.enable_ani)
cal_interval = min(cal_interval,
@@ -564,7 +633,6 @@ set_timer:
static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta)
{
struct ath_node *an;
- struct ath_hw *ah = sc->sc_ah;
an = (struct ath_node *)sta->drv_priv;
#ifdef CONFIG_ATH9K_DEBUGFS
@@ -573,9 +641,6 @@ static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta)
spin_unlock(&sc->nodes_lock);
an->sta = sta;
#endif
- if ((ah->caps.hw_caps) & ATH9K_HW_CAP_APM)
- sc->sc_flags |= SC_OP_ENABLE_APM;
-
if (sc->sc_flags & SC_OP_TXAGGR) {
ath_tx_node_init(sc, an);
an->maxampdu = 1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
@@ -599,74 +664,6 @@ static void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta)
ath_tx_node_cleanup(sc, an);
}
-void ath_hw_check(struct work_struct *work)
-{
- struct ath_softc *sc = container_of(work, struct ath_softc, hw_check_work);
- struct ath_common *common = ath9k_hw_common(sc->sc_ah);
- unsigned long flags;
- int busy;
-
- ath9k_ps_wakeup(sc);
- if (ath9k_hw_check_alive(sc->sc_ah))
- goto out;
-
- spin_lock_irqsave(&common->cc_lock, flags);
- busy = ath_update_survey_stats(sc);
- spin_unlock_irqrestore(&common->cc_lock, flags);
-
- ath_dbg(common, ATH_DBG_RESET, "Possible baseband hang, "
- "busy=%d (try %d)\n", busy, sc->hw_busy_count + 1);
- if (busy >= 99) {
- if (++sc->hw_busy_count >= 3) {
- spin_lock_bh(&sc->sc_pcu_lock);
- ath_reset(sc, true);
- spin_unlock_bh(&sc->sc_pcu_lock);
- }
- } else if (busy >= 0)
- sc->hw_busy_count = 0;
-
-out:
- ath9k_ps_restore(sc);
-}
-
-static void ath_hw_pll_rx_hang_check(struct ath_softc *sc, u32 pll_sqsum)
-{
- static int count;
- struct ath_common *common = ath9k_hw_common(sc->sc_ah);
-
- if (pll_sqsum >= 0x40000) {
- count++;
- if (count == 3) {
- /* Rx is hung for more than 500ms. Reset it */
- ath_dbg(common, ATH_DBG_RESET,
- "Possible RX hang, resetting");
- spin_lock_bh(&sc->sc_pcu_lock);
- ath_reset(sc, true);
- spin_unlock_bh(&sc->sc_pcu_lock);
- count = 0;
- }
- } else
- count = 0;
-}
-
-void ath_hw_pll_work(struct work_struct *work)
-{
- struct ath_softc *sc = container_of(work, struct ath_softc,
- hw_pll_work.work);
- u32 pll_sqsum;
-
- if (AR_SREV_9485(sc->sc_ah)) {
-
- ath9k_ps_wakeup(sc);
- pll_sqsum = ar9003_get_pll_sqsum_dvc(sc->sc_ah);
- ath9k_ps_restore(sc);
-
- ath_hw_pll_rx_hang_check(sc, pll_sqsum);
-
- ieee80211_queue_delayed_work(sc->hw, &sc->hw_pll_work, HZ/5);
- }
-}
-
void ath9k_tasklet(unsigned long data)
{
@@ -677,17 +674,15 @@ void ath9k_tasklet(unsigned long data)
u32 status = sc->intrstatus;
u32 rxmask;
+ ath9k_ps_wakeup(sc);
+ spin_lock(&sc->sc_pcu_lock);
+
if ((status & ATH9K_INT_FATAL) ||
(status & ATH9K_INT_BB_WATCHDOG)) {
- spin_lock(&sc->sc_pcu_lock);
- ath_reset(sc, true);
- spin_unlock(&sc->sc_pcu_lock);
- return;
+ ieee80211_queue_work(sc->hw, &sc->hw_reset_work);
+ goto out;
}
- ath9k_ps_wakeup(sc);
- spin_lock(&sc->sc_pcu_lock);
-
/*
* Only run the baseband hang check if beacons stop working in AP or
* IBSS mode, because it has a high false positive rate. For station
@@ -706,8 +701,7 @@ void ath9k_tasklet(unsigned long data)
*/
ath_dbg(common, ATH_DBG_PS,
"TSFOOR - Sync with next Beacon\n");
- sc->ps_flags |= PS_WAIT_FOR_BEACON | PS_BEACON_SYNC |
- PS_TSFOOR_SYNC;
+ sc->ps_flags |= PS_WAIT_FOR_BEACON | PS_BEACON_SYNC;
}
if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
@@ -736,6 +730,7 @@ void ath9k_tasklet(unsigned long data)
if (status & ATH9K_INT_GENTIMER)
ath_gen_timer_isr(sc->sc_ah);
+out:
/* re-enable hardware interrupt */
ath9k_hw_enable_interrupts(ah);
@@ -826,11 +821,9 @@ irqreturn_t ath_isr(int irq, void *dev)
if (status & ATH9K_INT_TXURN)
ath9k_hw_updatetxtriglevel(ah, true);
- if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) {
- if (status & ATH9K_INT_RXEOL) {
- ah->imask &= ~(ATH9K_INT_RXEOL | ATH9K_INT_RXORN);
- ath9k_hw_set_interrupts(ah, ah->imask);
- }
+ if (status & ATH9K_INT_RXEOL) {
+ ah->imask &= ~(ATH9K_INT_RXEOL | ATH9K_INT_RXORN);
+ ath9k_hw_set_interrupts(ah, ah->imask);
}
if (status & ATH9K_INT_MIB) {
@@ -886,8 +879,9 @@ static void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw)
ath9k_ps_wakeup(sc);
spin_lock_bh(&sc->sc_pcu_lock);
+ atomic_set(&ah->intr_ref_cnt, -1);
- ath9k_hw_configpcipowersave(ah, 0, 0);
+ ath9k_hw_configpcipowersave(ah, false);
if (!ah->curchan)
ah->curchan = ath9k_cmn_get_curchannel(sc->hw, ah);
@@ -899,27 +893,13 @@ static void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw)
channel->center_freq, r);
}
- ath9k_cmn_update_txpow(ah, sc->curtxpow,
- sc->config.txpowlimit, &sc->curtxpow);
- if (ath_startrecv(sc) != 0) {
- ath_err(common, "Unable to restart recv logic\n");
- goto out;
- }
- if (sc->sc_flags & SC_OP_BEACONS)
- ath_set_beacon(sc); /* restart beacons */
-
- /* Re-Enable interrupts */
- ath9k_hw_set_interrupts(ah, ah->imask);
+ ath_complete_reset(sc, true);
/* Enable LED */
ath9k_hw_cfg_output(ah, ah->led_pin,
AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
ath9k_hw_set_gpio(ah, ah->led_pin, 0);
- ieee80211_wake_queues(hw);
- ieee80211_queue_delayed_work(hw, &sc->hw_pll_work, HZ/2);
-
-out:
spin_unlock_bh(&sc->sc_pcu_lock);
ath9k_ps_restore(sc);
@@ -932,11 +912,10 @@ void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw)
int r;
ath9k_ps_wakeup(sc);
- cancel_delayed_work_sync(&sc->hw_pll_work);
- spin_lock_bh(&sc->sc_pcu_lock);
+ ath_cancel_work(sc);
- ieee80211_stop_queues(hw);
+ spin_lock_bh(&sc->sc_pcu_lock);
/*
* Keep the LED on when the radio is disabled
@@ -947,13 +926,7 @@ void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw)
ath9k_hw_cfg_gpio_input(ah, ah->led_pin);
}
- /* Disable interrupts */
- ath9k_hw_disable_interrupts(ah);
-
- ath_drain_all_txq(sc, false); /* clear pending tx frames */
-
- ath_stoprecv(sc); /* turn off frame recv */
- ath_flushrecv(sc); /* flush recv queue */
+ ath_prepare_reset(sc, false, true);
if (!ah->curchan)
ah->curchan = ath9k_cmn_get_curchannel(hw, ah);
@@ -967,55 +940,19 @@ void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw)
ath9k_hw_phy_disable(ah);
- ath9k_hw_configpcipowersave(ah, 1, 1);
+ ath9k_hw_configpcipowersave(ah, true);
spin_unlock_bh(&sc->sc_pcu_lock);
ath9k_ps_restore(sc);
}
-int ath_reset(struct ath_softc *sc, bool retry_tx)
+static int ath_reset(struct ath_softc *sc, bool retry_tx)
{
- struct ath_hw *ah = sc->sc_ah;
- struct ath_common *common = ath9k_hw_common(ah);
- struct ieee80211_hw *hw = sc->hw;
int r;
- sc->hw_busy_count = 0;
-
- /* Stop ANI */
-
- del_timer_sync(&common->ani.timer);
-
ath9k_ps_wakeup(sc);
- ieee80211_stop_queues(hw);
-
- ath9k_hw_disable_interrupts(ah);
- ath_drain_all_txq(sc, retry_tx);
-
- ath_stoprecv(sc);
- ath_flushrecv(sc);
-
- r = ath9k_hw_reset(ah, sc->sc_ah->curchan, ah->caldata, false);
- if (r)
- ath_err(common,
- "Unable to reset hardware; reset status %d\n", r);
-
- if (ath_startrecv(sc) != 0)
- ath_err(common, "Unable to start recv logic\n");
-
- /*
- * We may be doing a reset in response to a request
- * that changes the channel so update any state that
- * might change as a result.
- */
- ath9k_cmn_update_txpow(ah, sc->curtxpow,
- sc->config.txpowlimit, &sc->curtxpow);
-
- if ((sc->sc_flags & SC_OP_BEACONS) || !(sc->sc_flags & (SC_OP_OFFCHANNEL)))
- ath_set_beacon(sc); /* restart beacons */
-
- ath9k_hw_set_interrupts(ah, ah->imask);
+ r = ath_reset_internal(sc, NULL, retry_tx);
if (retry_tx) {
int i;
@@ -1028,15 +965,80 @@ int ath_reset(struct ath_softc *sc, bool retry_tx)
}
}
- ieee80211_wake_queues(hw);
+ ath9k_ps_restore(sc);
+
+ return r;
+}
+
+void ath_reset_work(struct work_struct *work)
+{
+ struct ath_softc *sc = container_of(work, struct ath_softc, hw_reset_work);
+
+ ath_reset(sc, true);
+}
+
+void ath_hw_check(struct work_struct *work)
+{
+ struct ath_softc *sc = container_of(work, struct ath_softc, hw_check_work);
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+ unsigned long flags;
+ int busy;
+
+ ath9k_ps_wakeup(sc);
+ if (ath9k_hw_check_alive(sc->sc_ah))
+ goto out;
+
+ spin_lock_irqsave(&common->cc_lock, flags);
+ busy = ath_update_survey_stats(sc);
+ spin_unlock_irqrestore(&common->cc_lock, flags);
+
+ ath_dbg(common, ATH_DBG_RESET, "Possible baseband hang, "
+ "busy=%d (try %d)\n", busy, sc->hw_busy_count + 1);
+ if (busy >= 99) {
+ if (++sc->hw_busy_count >= 3)
+ ieee80211_queue_work(sc->hw, &sc->hw_reset_work);
- /* Start ANI */
- if (!common->disable_ani)
- ath_start_ani(common);
+ } else if (busy >= 0)
+ sc->hw_busy_count = 0;
+out:
ath9k_ps_restore(sc);
+}
- return r;
+static void ath_hw_pll_rx_hang_check(struct ath_softc *sc, u32 pll_sqsum)
+{
+ static int count;
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+
+ if (pll_sqsum >= 0x40000) {
+ count++;
+ if (count == 3) {
+ /* Rx is hung for more than 500ms. Reset it */
+ ath_dbg(common, ATH_DBG_RESET,
+ "Possible RX hang, resetting");
+ ieee80211_queue_work(sc->hw, &sc->hw_reset_work);
+ count = 0;
+ }
+ } else
+ count = 0;
+}
+
+void ath_hw_pll_work(struct work_struct *work)
+{
+ struct ath_softc *sc = container_of(work, struct ath_softc,
+ hw_pll_work.work);
+ u32 pll_sqsum;
+
+ if (AR_SREV_9485(sc->sc_ah)) {
+
+ ath9k_ps_wakeup(sc);
+ pll_sqsum = ar9003_get_pll_sqsum_dvc(sc->sc_ah);
+ ath9k_ps_restore(sc);
+
+ ath_hw_pll_rx_hang_check(sc, pll_sqsum);
+
+ ieee80211_queue_delayed_work(sc->hw, &sc->hw_pll_work, HZ/5);
+ }
}
/**********************/
@@ -1066,7 +1068,7 @@ static int ath9k_start(struct ieee80211_hw *hw)
init_channel = ath9k_cmn_get_curchannel(hw, ah);
/* Reset SERDES registers */
- ath9k_hw_configpcipowersave(ah, 0, 0);
+ ath9k_hw_configpcipowersave(ah, false);
/*
* The basic interface to setting the hardware in a good
@@ -1085,28 +1087,6 @@ static int ath9k_start(struct ieee80211_hw *hw)
goto mutex_unlock;
}
- /*
- * This is needed only to setup initial state
- * but it's best done after a reset.
- */
- ath9k_cmn_update_txpow(ah, sc->curtxpow,
- sc->config.txpowlimit, &sc->curtxpow);
-
- /*
- * Setup the hardware after reset:
- * The receive engine is set going.
- * Frame transmit is handled entirely
- * in the frame output path; there's nothing to do
- * here except setup the interrupt mask.
- */
- if (ath_startrecv(sc) != 0) {
- ath_err(common, "Unable to start recv logic\n");
- r = -EIO;
- spin_unlock_bh(&sc->sc_pcu_lock);
- goto mutex_unlock;
- }
- spin_unlock_bh(&sc->sc_pcu_lock);
-
/* Setup our intr mask. */
ah->imask = ATH9K_INT_TX | ATH9K_INT_RXEOL |
ATH9K_INT_RXORN | ATH9K_INT_FATAL |
@@ -1129,11 +1109,14 @@ static int ath9k_start(struct ieee80211_hw *hw)
/* Disable BMISS interrupt when we're not associated */
ah->imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS);
- ath9k_hw_set_interrupts(ah, ah->imask);
- ieee80211_wake_queues(hw);
+ if (!ath_complete_reset(sc, false)) {
+ r = -EIO;
+ spin_unlock_bh(&sc->sc_pcu_lock);
+ goto mutex_unlock;
+ }
- ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
+ spin_unlock_bh(&sc->sc_pcu_lock);
if ((ah->btcoex_hw.scheme != ATH_BTCOEX_CFG_NONE) &&
!ah->btcoex_hw.enabled) {
@@ -1141,8 +1124,6 @@ static int ath9k_start(struct ieee80211_hw *hw)
AR_STOMP_LOW_WLAN_WGHT);
ath9k_hw_btcoex_enable(ah);
- if (common->bus_ops->bt_coex_prep)
- common->bus_ops->bt_coex_prep(common);
if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
ath9k_btcoex_timer_resume(sc);
}
@@ -1228,10 +1209,7 @@ static void ath9k_stop(struct ieee80211_hw *hw)
mutex_lock(&sc->mutex);
- cancel_delayed_work_sync(&sc->tx_complete_work);
- cancel_delayed_work_sync(&sc->hw_pll_work);
- cancel_work_sync(&sc->paprd_work);
- cancel_work_sync(&sc->hw_check_work);
+ ath_cancel_work(sc);
if (sc->sc_flags & SC_OP_INVALID) {
ath_dbg(common, ATH_DBG_ANY, "Device not present\n");
@@ -1676,6 +1654,7 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
struct ieee80211_channel *curchan = hw->conf.channel;
+ struct ath9k_channel old_chan;
int pos = curchan->hw_value;
int old_pos = -1;
unsigned long flags;
@@ -1692,15 +1671,25 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
"Set channel: %d MHz type: %d\n",
curchan->center_freq, conf->channel_type);
- ath9k_cmn_update_ichannel(&sc->sc_ah->channels[pos],
- curchan, conf->channel_type);
-
/* update survey stats for the old channel before switching */
spin_lock_irqsave(&common->cc_lock, flags);
ath_update_survey_stats(sc);
spin_unlock_irqrestore(&common->cc_lock, flags);
/*
+ * Preserve the current channel values, before updating
+ * the same channel
+ */
+ if (old_pos == pos) {
+ memcpy(&old_chan, &sc->sc_ah->channels[pos],
+ sizeof(struct ath9k_channel));
+ ah->curchan = &old_chan;
+ }
+
+ ath9k_cmn_update_ichannel(&sc->sc_ah->channels[pos],
+ curchan, conf->channel_type);
+
+ /*
* If the operating channel changes, change the survey in-use flags
* along with it.
* Reset the survey data for the new channel, unless we're switching
@@ -2331,9 +2320,11 @@ static void ath9k_flush(struct ieee80211_hw *hw, bool drop)
ath9k_ps_wakeup(sc);
spin_lock_bh(&sc->sc_pcu_lock);
drain_txq = ath_drain_all_txq(sc, false);
+ spin_unlock_bh(&sc->sc_pcu_lock);
+
if (!drain_txq)
ath_reset(sc, false);
- spin_unlock_bh(&sc->sc_pcu_lock);
+
ath9k_ps_restore(sc);
ieee80211_wake_queues(hw);
@@ -2396,6 +2387,73 @@ skip:
return sc->beacon.tx_last;
}
+static int ath9k_get_stats(struct ieee80211_hw *hw,
+ struct ieee80211_low_level_stats *stats)
+{
+ struct ath_softc *sc = hw->priv;
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath9k_mib_stats *mib_stats = &ah->ah_mibStats;
+
+ stats->dot11ACKFailureCount = mib_stats->ackrcv_bad;
+ stats->dot11RTSFailureCount = mib_stats->rts_bad;
+ stats->dot11FCSErrorCount = mib_stats->fcs_bad;
+ stats->dot11RTSSuccessCount = mib_stats->rts_good;
+ return 0;
+}
+
+static u32 fill_chainmask(u32 cap, u32 new)
+{
+ u32 filled = 0;
+ int i;
+
+ for (i = 0; cap && new; i++, cap >>= 1) {
+ if (!(cap & BIT(0)))
+ continue;
+
+ if (new & BIT(0))
+ filled |= BIT(i);
+
+ new >>= 1;
+ }
+
+ return filled;
+}
+
+static int ath9k_set_antenna(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant)
+{
+ struct ath_softc *sc = hw->priv;
+ struct ath_hw *ah = sc->sc_ah;
+
+ if (!rx_ant || !tx_ant)
+ return -EINVAL;
+
+ sc->ant_rx = rx_ant;
+ sc->ant_tx = tx_ant;
+
+ if (ah->caps.rx_chainmask == 1)
+ return 0;
+
+ /* AR9100 runs into calibration issues if not all rx chains are enabled */
+ if (AR_SREV_9100(ah))
+ ah->rxchainmask = 0x7;
+ else
+ ah->rxchainmask = fill_chainmask(ah->caps.rx_chainmask, rx_ant);
+
+ ah->txchainmask = fill_chainmask(ah->caps.tx_chainmask, tx_ant);
+ ath9k_reload_chainmask_settings(sc);
+
+ return 0;
+}
+
+static int ath9k_get_antenna(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant)
+{
+ struct ath_softc *sc = hw->priv;
+
+ *tx_ant = sc->ant_tx;
+ *rx_ant = sc->ant_rx;
+ return 0;
+}
+
struct ieee80211_ops ath9k_ops = {
.tx = ath9k_tx,
.start = ath9k_start,
@@ -2420,5 +2478,8 @@ struct ieee80211_ops ath9k_ops = {
.set_coverage_class = ath9k_set_coverage_class,
.flush = ath9k_flush,
.tx_frames_pending = ath9k_tx_frames_pending,
- .tx_last_beacon = ath9k_tx_last_beacon,
+ .tx_last_beacon = ath9k_tx_last_beacon,
+ .get_stats = ath9k_get_stats,
+ .set_antenna = ath9k_set_antenna,
+ .get_antenna = ath9k_get_antenna,
};