1 files changed, 280 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
new file mode 100644
index 000000000000..ccdf20a2e9be
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -0,0 +1,280 @@
+/*
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/nl80211.h>
+#include <linux/pci.h>
+#include "ath9k.h"
+
+static struct pci_device_id ath_pci_id_table[] __devinitdata = {
+	{ PCI_VDEVICE(ATHEROS, 0x0023) }, /* PCI   */
+	{ PCI_VDEVICE(ATHEROS, 0x0024) }, /* PCI-E */
+	{ PCI_VDEVICE(ATHEROS, 0x0027) }, /* PCI   */
+	{ PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI   */
+	{ PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */
+	{ PCI_VDEVICE(ATHEROS, 0x002B) }, /* PCI-E */
+	{ 0 }
+};
+
+/* return bus cachesize in 4B word units */
+static void ath_pci_read_cachesize(struct ath_softc *sc, int *csz)
+{
+	u8 u8tmp;
+
+	pci_read_config_byte(to_pci_dev(sc->dev), PCI_CACHE_LINE_SIZE,
+			     (u8 *)&u8tmp);
+	*csz = (int)u8tmp;
+
+	/*
+	 * This check was put in to avoid "unplesant" consequences if
+	 * the bootrom has not fully initialized all PCI devices.
+	 * Sometimes the cache line size register is not set
+	 */
+
+	if (*csz == 0)
+		*csz = DEFAULT_CACHELINE >> 2;   /* Use the default size */
+}
+
+static void ath_pci_cleanup(struct ath_softc *sc)
+{
+	struct pci_dev *pdev = to_pci_dev(sc->dev);
+
+	pci_iounmap(pdev, sc->mem);
+	pci_disable_device(pdev);
+	pci_release_region(pdev, 0);
+}
+
+static bool ath_pci_eeprom_read(struct ath_hw *ah, u32 off, u16 *data)
+{
+	(void)REG_READ(ah, AR5416_EEPROM_OFFSET + (off << AR5416_EEPROM_S));
+
+	if (!ath9k_hw_wait(ah,
+			   AR_EEPROM_STATUS_DATA,
+			   AR_EEPROM_STATUS_DATA_BUSY |
+			   AR_EEPROM_STATUS_DATA_PROT_ACCESS, 0,
+			   AH_WAIT_TIMEOUT)) {
+		return false;
+	}
+
+	*data = MS(REG_READ(ah, AR_EEPROM_STATUS_DATA),
+		   AR_EEPROM_STATUS_DATA_VAL);
+
+	return true;
+}
+
+static struct ath_bus_ops ath_pci_bus_ops = {
+	.read_cachesize = ath_pci_read_cachesize,
+	.cleanup = ath_pci_cleanup,
+	.eeprom_read = ath_pci_eeprom_read,
+};
+
+static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	void __iomem *mem;
+	struct ath_wiphy *aphy;
+	struct ath_softc *sc;
+	struct ieee80211_hw *hw;
+	u8 csz;
+	int ret = 0;
+	struct ath_hw *ah;
+
+	if (pci_enable_device(pdev))
+		return -EIO;
+
+	ret =  pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+
+	if (ret) {
+		printk(KERN_ERR "ath9k: 32-bit DMA not available\n");
+		goto bad;
+	}
+
+	ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+
+	if (ret) {
+		printk(KERN_ERR "ath9k: 32-bit DMA consistent "
+			"DMA enable failed\n");
+		goto bad;
+	}
+
+	/*
+	 * Cache line size is used to size and align various
+	 * structures used to communicate with the hardware.
+	 */
+	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
+	if (csz == 0) {
+		/*
+		 * Linux 2.4.18 (at least) writes the cache line size
+		 * register as a 16-bit wide register which is wrong.
+		 * We must have this setup properly for rx buffer
+		 * DMA to work so force a reasonable value here if it
+		 * comes up zero.
+		 */
+		csz = L1_CACHE_BYTES / sizeof(u32);
+		pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
+	}
+	/*
+	 * The default setting of latency timer yields poor results,
+	 * set it to the value used by other systems. It may be worth
+	 * tweaking this setting more.
+	 */
+	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
+
+	pci_set_master(pdev);
+
+	ret = pci_request_region(pdev, 0, "ath9k");
+	if (ret) {
+		dev_err(&pdev->dev, "PCI memory region reserve error\n");
+		ret = -ENODEV;
+		goto bad;
+	}
+
+	mem = pci_iomap(pdev, 0, 0);
+	if (!mem) {
+		printk(KERN_ERR "PCI memory map error\n") ;
+		ret = -EIO;
+		goto bad1;
+	}
+
+	hw = ieee80211_alloc_hw(sizeof(struct ath_wiphy) +
+				sizeof(struct ath_softc), &ath9k_ops);
+	if (hw == NULL) {
+		printk(KERN_ERR "ath_pci: no memory for ieee80211_hw\n");
+		goto bad2;
+	}
+
+	SET_IEEE80211_DEV(hw, &pdev->dev);
+	pci_set_drvdata(pdev, hw);
+
+	aphy = hw->priv;
+	sc = (struct ath_softc *) (aphy + 1);
+	aphy->sc = sc;
+	aphy->hw = hw;
+	sc->pri_wiphy = aphy;
+	sc->hw = hw;
+	sc->dev = &pdev->dev;
+	sc->mem = mem;
+	sc->bus_ops = &ath_pci_bus_ops;
+
+	if (ath_attach(id->device, sc) != 0) {
+		ret = -ENODEV;
+		goto bad3;
+	}
+
+	/* setup interrupt service routine */
+
+	if (request_irq(pdev->irq, ath_isr, IRQF_SHARED, "ath", sc)) {
+		printk(KERN_ERR "%s: request_irq failed\n",
+			wiphy_name(hw->wiphy));
+		ret = -EIO;
+		goto bad4;
+	}
+
+	sc->irq = pdev->irq;
+
+	ah = sc->sc_ah;
+	printk(KERN_INFO
+	       "%s: Atheros AR%s MAC/BB Rev:%x "
+	       "AR%s RF Rev:%x: mem=0x%lx, irq=%d\n",
+	       wiphy_name(hw->wiphy),
+	       ath_mac_bb_name(ah->hw_version.macVersion),
+	       ah->hw_version.macRev,
+	       ath_rf_name((ah->hw_version.analog5GhzRev & AR_RADIO_SREV_MAJOR)),
+	       ah->hw_version.phyRev,
+	       (unsigned long)mem, pdev->irq);
+
+	return 0;
+bad4:
+	ath_detach(sc);
+bad3:
+	ieee80211_free_hw(hw);
+bad2:
+	pci_iounmap(pdev, mem);
+bad1:
+	pci_release_region(pdev, 0);
+bad:
+	pci_disable_device(pdev);
+	return ret;
+}
+
+static void ath_pci_remove(struct pci_dev *pdev)
+{
+	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+	struct ath_wiphy *aphy = hw->priv;
+	struct ath_softc *sc = aphy->sc;
+
+	ath_cleanup(sc);
+}
+
+#ifdef CONFIG_PM
+
+static int ath_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+	struct ath_wiphy *aphy = hw->priv;
+	struct ath_softc *sc = aphy->sc;
+
+	ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
+
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, PCI_D3hot);
+
+	return 0;
+}
+
+static int ath_pci_resume(struct pci_dev *pdev)
+{
+	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+	struct ath_wiphy *aphy = hw->priv;
+	struct ath_softc *sc = aphy->sc;
+	int err;
+
+	err = pci_enable_device(pdev);
+	if (err)
+		return err;
+	pci_restore_state(pdev);
+
+	/* Enable LED */
+	ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN,
+			    AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
+	ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
+
+	return 0;
+}
+
+#endif /* CONFIG_PM */
+
+MODULE_DEVICE_TABLE(pci, ath_pci_id_table);
+
+static struct pci_driver ath_pci_driver = {
+	.name       = "ath9k",
+	.id_table   = ath_pci_id_table,
+	.probe      = ath_pci_probe,
+	.remove     = ath_pci_remove,
+#ifdef CONFIG_PM
+	.suspend    = ath_pci_suspend,
+	.resume     = ath_pci_resume,
+#endif /* CONFIG_PM */
+};
+
+int ath_pci_init(void)
+{
+	return pci_register_driver(&ath_pci_driver);
+}
+
+void ath_pci_exit(void)
+{
+	pci_unregister_driver(&ath_pci_driver);
+}